1 2 3

Semakan dokumen

Position both of the cars close together so that the jump leads will reach both batteries.

Position both of the cars close together so that the jump leads

will reach both batteries.

1 2 3

Semakan dokumen

Then connect the car battery booster cables in this order ; a. Connect (+) positive red cable to the (+) positive terminal on the dead battery. b. Connect the other end of the (+) positive red cable to (+) positive terminal on the working car. c. Connect (-) negative black cable to (-) negative terminal on the working car. d. Connect the other end of the (-) negative cable to the (-) negative terminal on the dead battery.

1 2 3

Semakan dokumen

Now that you're all set up, it's time to turn some keys. First, start the car with the good battery, and leave it running. If the battery in the dead was really badly drained, it may help to leave them connected for a minute with the good car running before you try to start the dead car. This will allow a little charge to build up in the dead battery. Turn the key in the dead car to start and it should fire right up! As long as you don't have any issues with your alternator, you can disconnect the jumper cables right away.