Julie Immo Emulator

8/15/2019 Julie Immo Emulator

1/184

1

Back to the Contents

JulieUniversal Emulator

There are many cars

but emulator is only one!

No car will ever surprise you!

You will no longer need to refer your customers to other workshops.

You have the choice of 67 programs.

You can use this emulator unlimited number of times for both

testing purposes or it can be left in a car permanently.

Program selection is effected by soldering umpers from " to 7.

To connect the emulator# please refer to specific installation manual.

You can buy our products and obtain technical support from our distributor. Find adistributor near you by clicking on the link: www.carlabimmo.com/our-partners

http://www.carlabimmo.com/our-partnershttp://www.carlabimmo.com/our-partners


2/184

2


Julie - Universal Emulator Programs:

Immo programs

$% automatic immo &'' (single use)..............................................................................*

$% automatic immo &N (single use)...............................................................................*

$% without +,N..............................................................................................................-

$% itachi......................................................................................................................"/

$% $alve +ode..............................................................................................................."*

$% 01+"* immo &'' (single use)..............................................................................."7$% 01+"* immo &N (single use)................................................................................."7

$% 01+"6 23line immo &'' (single use)....................................................................4"

$% 01+"6 23line immo &N (single use)......................................................................4"

$% 01+"6 with +,N ".- 4.5 T1 immo &'' (single use).........................................4*

$% 01+"6 with +,N ".- 4.5 T1 immo &N (single use)...........................................4*

$% 01+"6 with +,N 4.7 /.5 T1 immo &'' (single use).........................................4*

$% 01+"6 with +,N 4.7 /.5 T1 immo &N (single use)...........................................4*

$% 07 immo &'' (single use)...................................................................................4-

$% 07 immo &N (single use).....................................................................................4-

+hrysler...........................................................................................................................//

+itroen# Peugeot with +,N............................................................................................./61aewoo "........................................................................................................................./-

1aewoo 4.........................................................................................................................8/

'iat without +,N............................................................................................................*"

'iat with +,N.................................................................................................................*-

'9& Polone:....................................................................................................................6"

onda...............................................................................................................................6/

2ia 9portage 4.5 T1........................................................................................................67

ercedes +; without +,N infrared...............................................................................6-

ercedes +;" with +,N %9P.......................................................................................7/

ercedes +;" with +,N 0


3/184

3


Seat occupancy sensor programs

No." B% ? without installed child seat....................................................................."*=

No.4 ercedes 3 without installed child seat................................................................"*-

No./ ercedes 3 with installed child seat......................................................................"*-

No.8 ercedes 3 without installed child seat................................................................"6"

No.* ercedes 3 with installed child seat......................................................................"6"

No.6 ercedes 3 without installed child seat................................................................"6/

No.7 ercedes 3 with installed child seat......................................................................"6/

No.= B% 3 without installed child seat......................................................................"6*

No.- B% 3 with installed child seat..........................................................................."6*

No."5 ini +ooper 3 without installed child seat........................................................."67 No."" ini +ooper ? with installed child seat.............................................................."67

No."4 a:da 3 without installed child seat..................................................................."6=

No."/ a:da 3 with installed child seat........................................................................"6=

No."8 'iat 9tilo 3 without installed child seat..............................................................."75

No."* 'iat 9tilo 3 with installed child seat...................................................................."75

No."6 ercedes............................................................................................................."74

No."7 ercedes............................................................................................................."7/

No."= ercedes............................................................................................................."78

Tachometer tester programs

,udi C7 and ,6............................................................................................................."76

+itroen +8 Picasso........................................................................................................."77

0' 1isplay.................................................................................................................."7=

;enault 2angoo 1isplay..........................................................................................."7-

;enault 9cenic # 0space $ Tacho.............................................................................."=5

;enault 9cenic # 0space $ 'ull.................................................................................."="

;enault 9cenic D Navi.............................................................................................."=4

$% Passat B6................................................................................................................"=/




4/184

4


@niversal ulie emulator includes

41 immo programs

18 seat occupanc sensor programs

8 tachometer tester programs

3 no umpers ? diagnostic mode 3 it flashes every second

3 $% ,utomatic# 01+"*# 01+"6 and 07 if used before ? does not flash

3 adusting to the 0+@ ? flashing 5#" sec

3 after adusting it lights constantly and blinks every other second




5/184

!


mmo programs

"# automatic immo $%% &single use'

(n Universal Julie Emulatorsol)er *umpers J! an) J+

,vailable as @niversal ulie 0mulator

program no. "

"# automatic immo $, &single use'

(n Universal Julie Emulatorsol)er *umpers J1 J! an) J+

,vailable as @niversal ulie

0mulator program no. 4

"# automatic immo $%% or $, programs

are single use an) can onl .e use) in one car/




6/184

+


U0E

( EC1+ C, 5-line

( EC1!

6asoline Bosch 7E

este) on the 9olloing electronic control units:

( EC1+ C, 5-line

5 4=" 5"" "8* $$ Passat B* 4.5 T1# 4556 3 mechanical ignition switch

5 4=" 5"" 4*= $% Touareg 4.* T1# 455/ 3 45"5

5 4=" 5"" /68 ,udi ,/ ".- T1# 4558

5 4=" 5"" /=/

5 4=" 5"" /=*

5 4=" 5"" *6= $% T* 4.* T1# 4556 3 4557

5 4=" 5"" =8/ $% Eolf $ 4.5 T1# 4558

5 4=" 5"" =88 $%Touran 4.5 T1# 4558

5 4=" 5"" =** $% T* ".- T1# 455/

5 4=" 5"" =*6 $% T* ".- T1# 455*

5 4=" 5"" ==4 $% +addy ".- T1# 4556

5 4=" 5"" ==/ 9koda &ctavia ".- T1# 4558 3 45"5

5 4=" 5"" -55

5 4=" 5"" -8*

5 4=" 5"" -86 $% Touran ".- T1# 4556

5 4=" 5"" -57 $% Touran 4.5 T1

5 4=" 5"4 445 $% Eolf $ ".- T1# 455*

5 4=" 5"4 /-5 $% +addy ".- T1# 455/ 3 45"5

5 4=" 5"4 6-6 9eat ,lhambra# $% 9haran 4.5 T1# 455* 3 45"5

5 4=" 5"4 6-= 9koda 9uperb 4.5 T1# 45565 4=" 5"4 764 $% T* ".- T1# 4556r. 3 45"5

5 4=" 5"4 7-4

5 4=" 5"4 ""/ ,udi ,8 4.5 T1# 455=

5 4=" 5"4 *8* ,udi ".- T1# 4557

5 4=" 5"4 *86 ,udi ".- T1# 4556

5 4=" 5"4 6*8 ,udi 4.5 T1# 455*

5 4=" 5"4 475 ,udi /.5 T1 ,6 Cuattro

5 4=" 5"/ 44= $% etta 4.5 T1# 4557

5 4=" 5"/ 4-- 9koda &ctavia 4.5 T1# 455* 3 45""

5 4=" 5"/ /54 $% Touareg 4.* T1# 455* 3 45"5

5 4=" 5"/ /"" $% Passat 4.5 T1# 455* 3 455-5 4=" 5"/ 885 $% Passat ++ 4.5 T1# 455* 3 455-

5 4=" 5"/ 656 $% Eolf $ ".- T1# 4556

5 4=" 5"/ "77 ,udi ,6 4.7 T1# 4557




7/184


5 4=" 5"8 558

5 4=" 5"8 588 $% Touran ".- T1# 4556 3 45"5

5 4=" 5"8 58- $% T* 4.* T1# 4557

5 4=" 5"8 568 $% Eolf ".- T1# 4556 3 455=

5 4=" 5"8 "4= $% Touran ".- T1# 4556 ? 45"5

5 4=" 5"8 "/6 9koda &ctavia ".- T1# 4556 3 45"5

5 4=" 5"8 =-" $% T* 4.* T1# 455-

5 4=" 5"8 /=8 ,udi ,6 4.7 T1# 4557

5 4=" 5"* "7* $% +addy ".- T1# 455=

( EC1!

Capacit 1;2 1;4 1;< 2;!

'rom 4555 to 4558# some vehicles from 4556 to even 455= (eFcept ,udi with coded pump)

6asoline Bosch 7E

Capacit 1;4 1;8 2;= 2;4 2;+ 2;8 3;= 3;! 4;2

5 46" 45" "88 $% Eolf $ ".8 4554 3 4556

5 46" 458 =7/ ,udi ,8G $% Passat ".= "---

5 46" 458 =-/ ,udi ,8 4.8 Cuattro 455"

5 46" 457 /65 $% Bora 4.5 4555 3 455*

5 46" 456 "4/ Passat 4.= 4555

5 46" 456 5"- ,udi ,= 8.4 4555

5 46" 457 */8 9eat >eon ".= 45$ 4554




8/184

8


1+-pin $B2 socket

". +onnect all the wires to the &B14 socket

2; U>, (6,(($, $, , #( 2= 0EC$,0

/. %hen ignition is turned on# connect the

emulatorHs plug to the emulatorHs P+B. &nce connected#

blue >01 flashes fast and after several seconds

the >01 should emit a constant light and blink

every other second

8. Turn ignition &'' and disconnect emulator

Programs no. " and 4 enable the emulator to automatically remove immo from a car by identifying

0+@ type and selecting a relevant program.

ttention/ 0election o9 programs no;1 an) 2 eliminates the possi.ilit to use the remain)er o9

the programs 9rom + to 1!;




9/184

<


"# ithout C,

(n Universal Julie Emulator

sol)er *umper J1

,vailable as dedicated emulator or

@niversal ulie 0mulator program no. "

U0E

%" and %4 systems up to around 455" 01+"* and *3socket >T4=G>T/* 0+@s 3 when the chassis

numbers are not entered 3 even up to 4556 diesel and gasoline 'ord cars with $% systems (the $%

symbol is visible on the 0+@).

+onnecting in place of the original immobiliser or instrument cluster.

(9 ou cannot start the car ou nee) to 9it the emulator to ECU;

f the emulator is not working# then connect the power supply of the emulator to D"4$ through the

reset button.

1isconnect immo and connect % line with 2 line to have a diagnosis.




10/184

1=


Cars ith immo.iliser integrate) in instrument cluster as o9 1


11/184

11





12/184

12


Connecting emulator to ECU




13/184

13


"# @itachi


sol)er *umpers J3 J4 an) J!


@niversal ulie 0mulator program no. 8

U0E

,udi ,6 4.= gasoline itachi 0+@

0ngine code ? ,,




14/184

14



Unplug the immo an) connect #-line ith 5-line to have a )iagnosis;




15/184

1!


"# "alve Co)e


sol)er *umpers J1 J3 J4 an) J!


@niversal ulie 0mulator program no. *

+onnecting in place of the original immobiliser

Unplug immo an) connect #-line ith 5-line to have a )iagnosis;




16/184

1+


Connecting emulator to the +-pin plug o9 the immo.iliser




17/184

1


"# EC1! immo $%% &single use'


sol)er *umper J2


program no. 6

"# EC1! immo $, &single use'


sol)er *umpers J1 an) J2



"# EC1! immo $%% or $, programsare single use an) can onl .e use) in one car/




18/184

18


This emulator replaces damaged immobiliser# instrument cluster or a car key.

mmo gets removed once the emulator is connected to the &B1 socket.

n the case of losing car keys or car theft#you will be able to drive to the nearest car garage

U0E

$% 01+"* immo emulator ? %4 and %/ systems# diesel engines from 4555 to 4558# some to

4556# and even 455= (eFcept ,udi with coded pump)

9uitable for vehicles with 43socket 0+@s

0ngine capacity

".4 T1 ".8 T1 ".- T1 4.* T1

Be9ore using the emulator check i9 there is a connection .eteen ECU an) $B2

You can use a $% 01+"* emulator in the following situations

%hen getting an 0ngine +ontrol odule Blocked by mmobiliser fault when making connectionwith 0+@ with a diagnostic interface or if your car starts and then dies




19/184

1<


1+-pin $B2 socket


2; U>, (6,(($, $, , #( 2= 0EC$,0





every other second


"# EC1! emulator )oes not remove immo )ue to a program change to 9lash memor in

ECU:

01+"* ,udi ,6 4.* T1 $6 455/

=05 -57 85" 5 4=" 5"" 4**




20/184

2=


14-pin socket in A

'itting procedure of emulator is the same as for the &B14 socket




21/184

21


"# EC1+ 5-line immo $%% &single use'


sol)er *umper J3


program no. =

"# EC1+ 5-line immo $, &single use'




0mulator program no. -

"# EC1+ 5-line immo $%% or $, programsare single use an) can onl .e use) in one car/




22/184

22





U0E

EC1+ 5-line immo $%%

an)

EC1+ 5-line - immo $,

(turning immo back on is impossible for certain 0+@s)

este) ECUs:

= 281 =11

5 4=" 5"" =*6 $% T* ".- T1# 455*

5 4=" 5"" *6= $% T* 4.* T1 4556G4557

5 4=" 5"" ==/ 9koda &ctavia ".- T1 4558 3 45"5

5 4=" 5"" =** $% T* ".- T1 455/

5 4=" 5"" 4*= $% Touareg 4.* T1 455/ 3 45"5

5 4=" 5"" "8* $% Passat B* 4.5 T1 4556 3 mechanical ingition switch

= 281 =12

5 4=" 5"4 764 $% T* ".- T1 4556 3 45"5

5 4=" 5"4 /-5 $% +addy ".- T1 455/ 3 45"5

5 4=" 5"4 6-= 9koda 9uperb 4.5 T1 4556

5 4=" 5"4 6-6 9eat ,lhambra# $% 9haran 4.5 T1 455* 345"5

5 4=" 5"4 7-4

5 4=" 5"4 445 $% Eolf $ ".- T1 455*

= 281 =13

5 4=" 5"/ 885 $% Passat ++ 4.5 T1 455* 3 455-

5 4=" 5"/ /54 $% Touareg 4.* T1 455* 3 45"5

5 4=" 5"/ /"" $% Passat 4.5 T1 455* 3 455-

5 4=" 5"/ 656 $% Eolf $ ".- T1 4556

5 4=" 5"/ 4-- 9koda &ctavia 4.5 T1 455* 3 45""

5 4=" 5"/ 44= $% etta 4.5 T1 4557

= 281 =14

5 4=" 5"8 588 $% Touran ".- T1 4556 3 45"5

5 4=" 5"8 558

5 4=" 5"8 568 $% Eolf $ ".- T1 4556 3 455=




23/184

23


5 4=" 5"8 "4= Touran".- T1 4556 3 45"5

5 4=" 5"8 "/6 9koda &ctavia ".- T1 4556 3 45"5

5 4=" 5"8 568 $% Eolf $ ".- T1 455-

= 281 =1!

5 4=" 5"* "7* $% +addy ".- T1 455=



You can use a $% 01+"6 23line emulator in the following situations

%hen getting an 0ngine +ontrol odule Blocked by mmobiliser fault when making connection

with 0+@ with a diagnostic interface or if your car starts and then dies




24/184

24


1+-pin $B2 socket


2; U>, (6,(($, $, , #( 2= 0EC$,0





every other second





25/184

2!


"# EC1+ ith C, 1;< 2;= ( immo $%% &single use'




program no. "5

"# EC1+ ith C, 1;< 2;= ( immo $, &single use'




program no. ""

"# EC1+ ith C, 2; 3;= ( immo $%% &single use'




program no. "4

"# EC1+ ith C, 2; 3;= ( immo $, &single use'


sol)er *umpers J4 an) J!


program no. "/




26/184

2+


"# EC1+ ith C, 1;


27/184

2


U0E

EC1+ ith C, 1;< 2;= ( immo $%%

an)

EC1+ ith C, 1;< 2;= ( - immo $,


este) ECUs:

= 281 =12

5 4=" 5"4 ""/ ,udi ,8 4.5 T1 455=

5 4=" 5"4 *8* ,udi ".- T1 4557

5 4=" 5"4 *86 ,udi ".- T1 4556

5 4=" 5"4 6*8 ,udi 4.5 T1 455*

EC1+ ith C, 2; 3;= ( immo $%%

an)

EC1+ ith C, 2; 3;= ( - immo $,


este) ECUs:

5 4=" 5"4 475 ,udi ,6 Cuattro /.5 T15 4=" 5"/ "77 ,udi ,6 4.7 T1 4557

5 4=" 5"8 /=8 ,udi ,6 4.7 T1 4557




28/184

28


1+-pin $B2 socket


2; U>, (6,(($, $, , #( 2= 0EC$,0





every other second





29/184

2<


"# 7E immo $%% &single use'




program no. "8

"# 7E immo $, &single use'




0mulator program no. "*

"# 7E immo $%% or $, programsare single use an) can onl .e use) in one car/




30/184

3=





U0E

"6 group vehicles ith 2-socket Bosch 7E ECUs

".5 ".8 ".= 4.5 4.8 4.6 4.= /.5 /.* 8.4

from "--- to about 455=

este) ECUs:

5 46" 45" "88 $% Eolf $ ".8 4554 3 4556

5 46" 458 =7/ ,udi ,8G $% Passat ".= "---

5 46" 457 /65 $% Bora 4.5 4555 3 455*

5 46" 456 "4/ $% Passat 4.= 4555

5 46" 456 5"- ,udi ,= 8.4 4555

5 46" 457 */8 9eat >eon ".= 45$ 4554





31/184

31



You can use a $% 07 emulator in the following situations

%hen getting an 0ngine +ontrol odule Blocked by mmobiliser fault when making connection

with 0+@ with a diagnostic interface or if your car starts and then dies




32/184

32


1+-pin $B2 socket


2; U>, (6,(($, $, , #( 2= 0EC$,0





every other second





33/184

33


Chrsler


sol)er *umpers J1 J2 J3 an) J+


@niversal ulie 0mulator program no. "6

U0E

Chrsler "oager

o)ge Caravan

Jeep Cherokee

4.*T1 "---3455"




34/184

34


'ind 24C=2 memory in 0+@

n 48+54 memory

write 55 /6 *- ** /* // /" /- /* and /* values

in addresses from =3 to =4=




35/184

3!


Connection )iagram e?amples

+ut off immo line marked in the picture




36/184

3+


Citroen Peugeot ith C,




program no. "7

U0E

EC1+ 1;4 1;+ @( ith C,

EC1! @( ith C,

01+"6 0+@s with +,N

".8 1 and ".6 1




37/184

3


This emulator reIuires modification of





38/184

38


EC1! @( ith C,

This emulator reIuires modification of !P=8C3 memory in addresses shown belowJ

n 455345/ values writeJ

3 ! B3 !

n 4"634"- values writeJ

+2 C< !+ EB

n 44,3441 values writeJ

8 1C %8





39/184

3<


aeoo 1


sol)er *umpers J1 J2 an) J3


@niversal ulie 0mulator program no. "=

U0E

ECUs ith hite - re) sockets an) ECUs ith .lue sockets

ECU ith hite re) socket




40/184

4=


This emulator reIuires modification of 7otorola @C11%1 processor located in 0+@.

n address "5# write value 3 == 3 == twice

&nce you modified otorola# connect emulator to the 0+@ as pictured.

Be9ore connecting the emulator it must .e precisel insulate) ith insulation tape an) the

original immo.iliser must .e )isconnecte)///

n case of problems with starting the car# disconnect power supply (D"4$) in 0+@ and connect

D"4$ ,++ in place of power supply.




41/184

41


ECU ith .lue socket

This emulator reIuires modification of 7otorola @C11%1 processor located in 0+@

n address %E1=# write value 3 == 3 == twice

&nce you modified otorola# connect emulator to the 0+@ as pictured.




42/184

42


isconnect immo or cut o99 pin B 9rom ECU

Be9ore connecting the emulator it must .e precisel insulate) ith insulation tape an) theoriginal immo.iliser must .e )isconnecte)///

n case of problems with starting the car# )isconnect poer suppl &12"' in ECU and connect

D"4$ ,++ in place of power supply.




43/184

43


aeoo 2




@niversal ulie 0mulator program no. "-

his )evice sel9-learns ECU co)e

U0E

7atiD 0(E7E,0 ECU7atiD 5E70C$ ECU

acuma 5E70C$ ECU

Chevrolet 0park 32 ECU =;8ccm 38k#

Aanos h.ri) ECU 1;4 $@C

>eDDo h.ri) ECU 2;= 1+" 8(U0 42 ECU 1;2

Chevrolet veo 4> ECU 1;2 8"




44/184

44


7atiD 0(E7E,0 ECU


Cut o99 pin 11 9rom iring in the car ///




45/184

4!


7atiD 5E70C$ ECU





46/184

4+


acuma 5E70C$ ECU


Cut o99 pin !+ 9rom iring in the car///




47/184

4


Chevrolet 0park 32 ECU =;8ccm 38k#





48/184

48


Aanos h.ri) ECU 1;4 $@C

an)

>eDDo h.ri) ECU 2;= 1+" 8


49/184

4<


5alos 0(>(U0 42 ECU 1;2






50/184

!=


Chevrolet veo 4> ECU 1;2 8"






51/184

!1


%iat ithout C,


sol)er *umpers J4



U0E

%iat Citroen Peugeot )iesel

43socket 0+@

l9a %iat Aancia

".- td 4.8 td *3socket 0+@

(#4


52/184

!2


%iat Citroen Peugeot )iesel

43socket 0+@

,fter modifying !P=8C3 memory in line

"=5 into 55 values# connect emulator in

place of the original immobiliser





53/184

!3


l9a Aancia %iat 1;< Jt) 2;4 Jt)

!-socket ECU

n addresses from "0, to "'-# change

these values into 55 in 24C=4 memory


E,($,/

%hen putting 0+@ back together# put a piece of

cardboard on the wire making sure not to tighten

it firmly in this area. ,lternatively# break off a

piece of clamp holder and drag the cable over to

the other side




54/184

!4


(#4and then program it according to picture

below


+ut off pin "/ from wiring in the car !!!




55/184

!!


(# 4%

'iat 9eicento# Panda "." =$

+ut off pin "/ from wiring in the car !!!

'ind memory

and then program it according to picture below




56/184

!+


Aancia 5appa 2;=i 1+" ur.o

5 46" 45/ 7-4

+onnect immo line to pin !!.

1isconnect immo. +onnect ,6 and ,*

together.

o have )iagnosis the immo line must

.e ma)e in the reset .utton;

This device self3learns 0+@ code




57/184

!


Aancia 5appa 2;=i 2="

5 46" 45/ 675

To have diagnosis# the immo line must be

made in the reset button.

+onnect ,6 and ,* together.


Aancia 5appa 2;4i 1+"

5 46" 45/ 66-

+onnect immo line to pin !!. 1isconnect immo. +onnect ,6 and ,* together.

o have )iagnosis the immo line must .e ma)e in the reset .utton;




58/184

!8



Aancia 5appa 3;=i 24"

5 46" 45/ 8=4





59/184

!<


%iat ith C,


sol)er *umpers J1 an) J+


0mulator program no. 4"

U0E

%iat ith C, !0% an) +%3 ECU




60/184

+=


Connecting emulator to !0% ECU

Connecting to ECU socket




61/184

+1


%0$ PoloneD


sol)er *umpers J1 J2 J! an) J+



U0E

%0$ PoloneD 1;+60i




62/184

+2


EAC$ % ECU

'ind otorola @C11%1 processor in 0+@

n the addresses from 12= to 121# write 3E +2 values


Cut o99 pin B8 9rom ECU plug/




63/184

+3


@on)a


sol)er *umpers J2 J3 an) J+


@niversal ulie 0mulator program no. 4/

U0E

@on)a: ccor) C>" Civic an) other

&pro)uction ear1


64/184

+4


The emulator only works with 0+@ that has got immo board eIuipped with 463pin processor with a

label

@nsolder this immo board as shown in the picture above

n the place of the immo board# solder inthe emulator




65/184

+!


0Fample connection diagram of @on)a

emulator

0Fample connection diagram of Universal Julie

emulator

Be9ore starting the car )isconnect the plug 9rom immo .o?///




66/184

++


ECU Bosch 74;+;1

5 46" 458 =/5

@on)a ccor)

1;+i 1


67/184

+


5ia 0portage 2;=





U0E

5ia 0portage 2;=

EEA ECU immo ith remote control

0+@ is located under the floor mat at the front of the passenger3side footwell.




68/184

+8






69/184

+<


7erce)es C> ithout C, in9rare)




@niversal ulie 0mulator program no. 4*

U0E

(,%>>E (77$

ith 12-pin mo)ule 2-pin C,

here onl C, A is connecte) &there is no C, @';

6reen an) re) AE 9lash in the mirror;

Aucas !! pins 1-socket ECU 2;2 iesel

0(E7E,0 h.ri) ECU

1;8 2;= 2;3 gasoline

B$0C@ h.ri) ECU

2;= gasoline




70/184

=


Aucas !! pins 1-socket ECU 2;2 iesel

ercedes 03class %4"5


+ut off pin "/ in the 0+@ and pins * and 6 in the immo

module. Then# connect emulator. n the mirror and in

the door handle area >01s do not flash.




71/184

1


0(E7E,0 h.ri) ECU

1;8 2;= 2;3 gasoline

7erce)es C-class #2=2 1;8 gasoline

0(E7E,0 h.ri) ECU no; =18 !4! 41 32

+onnect emulator instead of infrared immo with "43pin module D 43pin +,N#which is located under the floor mat at the front of the passenger3side footwell.

EN1 and ,++ in the "43pin plug of

immobiliserJ

+ut off pin * and 6 in immo module# then >01s do not flash in the mirror.




72/184

2


7erce)es "ito 2;= an) 2;3 gasoline

0(E7E,0 h.ri) ECU

43socket 0+@ with vacuum hose#

-3pin immo# remote control locking and unlocking.

+onnecting in place of original immobiliser

B$0C@ h.ri) ECU

2;= gasoline

7erce)es C-class #2=2 2;= gasoline

B$0C@ h.ri) ECU no; = 2+1 2== +14

EN1 and ,++ in the "43pin plug of

immobiliser

+ut off pin * and 6 in immo module# then >01s do not flash in the mirror




73/184

3


7erce)es C>1 ith C, #0P





U0E

"ito 2;2 C)i

!-socket ECU

-class 1; C)i

!-socket ECU

EC 1-socket ECU

2;! 2;


74/184

4


#hen emulator is connecte) )isconnect C, 9rom original immo/

,3class $1& 9 0+@

".8 ".6 ".- gasoline

$ito 4.4 +di *3socket 0+@




75/184

!


"ito 2;2 C)i !-socket ECU

n ercedes $ito 4.4 +di# the starter does not turn# there is 0> E>>$> on the instrument

cluster

0+@ is located on the passenger side





76/184

+


'ind 24C=4 memory

n address 1EE to 1%


77/184



'ind 24C=4 memory

n the address 1EE to 1%


78/184

8


EC 1-socket ECU

2;! 2;


79/184

<


Bosch ECU ith @C11E<

There is otorola 4E28B @C11E< !2PACC in 0+@

Be9ore rea)ing content set oscillator at !!!+===@D/

1st C@,6E

n addresses from =1 6"- to 6"0)# write %% values




80/184


81/184

81


E-class Aucas 4-socket ECU

ith mechanical an) electronic ignition sitch

ercedes 03class 4.5 diesel "--6

>ucas ,5"-*8*-8/4 ed5"/ sw4*.-6 fd/5.-6

0+@ is located in the engine compartment on the passenger side

otorola @C115#1 Iuart: 87@D ? connection of -Prog programmer to otorola

Before a getting connection to processor you have to connect pin 75 and 7" together with a needle.

9older the wire to the needle that you then connect to EN1.




82/184

82


+hange to @C115#1 processor

n address from 22 to 22% write %%

value


,fter connecting the emulator# you need to carry out personali:ation with @@ or 0tar iagnosis

diagnostic tools. ,fter starting the engine# you must run the car for 65 seconds for coding to be

completed.

isconnect C, 9rom #0P///




83/184

83


-class "$ 707 ECU

1;4 1;+ 1;< gasoline

0+@ is located on the air delivery pipe together with with ,ir ass 'low 9ensor





84/184

84


To read and make changes to memory# use #ellon programmer

&nce 2


85/184

8!


7erce)es C>1 ith C, E0


sol)er *umpers J1 J2 J3 J4 an) J!



U0E

7erce)es 2-socket &hite' "$ ECU

ith memor 24C=2




86/184

8+


'ind 24C=2 eeprom in 0+@

n the addresses from =!= to =!3 write =2 =3 == %% values#

and in address =!! write 2= value in 24C=2 eeprom

or in addresses from =2= to =23 write =2 =3 == %% values#

and in address =2 write 2= value in 24C=2 eeprom




87/184

8



,fter connecting the emulator# you need to carry out personali:ation with @@ or 0tar iagnosis

diagnostic tools. ,fter starting the engine# you must run the car for 65 seconds for coding to be

completed.




88/184

88


7erce)es C>1 ith C, in9rare)


sol)er *umpers J+


0mulator program no. 4=

U0E

7erce)es 2-socket &.lack' "$ ECU

ith 24C=1 memor

7erce)es 2-socket &ello' "$ ECU

ith 24C=2 memor

7erce)es 2-socket Bosch ECU

ith B!8 &24AC=2' memor




89/184

8<


7erce)es 2-socket &.lack' "$ ECU

ith 24C=1 memor

'ind 24C=1 eeprom

n address =!! write /5 value




90/184


91/184


92/184


93/184


94/184

2 ith C, #0P




0mulator program no. 4-

U0E

0printer 2;2 C)i an) 2; C)i

7A 2; C)i !-socket automatic start

lso suita.le 9or 2; an) 3;2 ith electronic ignition sitch automatic start




95/184


%hen emulator is connected# disconnect

+,N from original immo!


'ind !P=8C3 memory




96/184


97/184


98/184


99/184


100/184

1==


Connecting to E0A:

7erce)es-BenD "ito +3<




101/184

1=1


7erce)es E0A 2 steering heel column lock emulator


sol)er *umpers J2 J! an) J+


@niversal ulie 0mulator program no. /"

#arning///

ue to possi.le construction changes o9 cars check signals ith multimeter in the ECU plug

.e9ore connecting the )evice;

E0A 2 emulator ena.les ou to veri9 correct 9unctioning o9 E0




102/184

1=2


(t orks ith ignition sitches num.ere)

, -56 *8* 5" 5=

, -56 *8* 68 5=

, -56 *8* 8- 5=, -56 *8* 85 5=

6/- *8* 5" 5=

6/- *8* 5* 5=

45/ *8* 5* 5=

45/ *8* 5" 5=

45/ *8* 5/ 5=




103/184

1=3


45= *8* 55 5= 45= *8* 5" 5=

45= *8* 54 5= 45= *8* 5/ 5=

4"5 *8* 55 5= 4"5 *8* 5" 5=

4"5 *8* 54 5= 4"5 *8* 5/ 5=

t self3learns code of the electronic ignition?plug and play

E0A

%-56 (9printer # $% +rafter)# %6/-#

%4""# %45-# %45/

E0A

%454# %45=# %4"5




104/184

1=4


Connecting to E0A:

#


105/184

1=!


Connecting to E0A:

7erce)es-BenD #2=3

Connecting to E0A:

7erce)es-BenD #2=2 #2=8 #21=




106/184

1=+


,issan ,0 4 an) !




@niversal ulie 0mulator program no. /4

U0E

ECU 9rom 2=== to 2==2 - ,0 4 an) ! immo

2;2 2; )iesel !-socket ECU ith 24C=4 memor

1;! gasoline @itachi 7EC ith


107/184

1=


2;2 2; )iesel !-socket ECU ith 24C=4 memor

'ind 24C=4 eeprom memory

n addresses

from =1 to =3 write 2 value

from =from =


108/184

1=8


2; )iesel !-socket ECU ith 24C=4 memor

n addresses

from =C to E write 2 values

in =C% write 2 value

from == to = write 2 2 8E 8E 8E

8E 8E 8E values


1;! gasoline @itachi 7EC ith


109/184

1=<


n address

from ==E to ==% write 2 8E or 8E 2

values


1;! 1;8 2;= gasoline @itachi 7EC ith


110/184

11=


'ind


111/184

111


1;4 gasoline Bosch ECU ith 24AC=2 memor

'ind B!82!3 eeprom memory 3 read as 24C=2

n address

from =+ to = write 2 8E values




112/184

112


BAUPU,5


113/184

113


CA>($, P,-1+287 ra)io ith 9


114/184

114


$pel immo ith @C=!


sol)er *umpers J1 J2 J3 an) J4


@niversal ulie 0mulator program no. //

U0E

1;2 an) 1;4 gasoline 2-socket &.lack' ECU ith 7otorola @C11E2= processor

2;= 2;2 an) 2;! gasoline ith 24C=2 eeprom memor




115/184

11!


1;2 an) 1;4 gasoline 2-socket &.lack' ECU ith 7otorola @C11E2= processor

'ind otorola @C11E2= processor

n address 1% write =% value


1isconnect immo and connect pin 6 with7 in the wiring of immo plug to

eliminate troubles with speed signal




116/184

11+


2;= 2;2 an) 2;! gasoline ith 24C=2 eeprom memor

'ind 24C=2 eeprom memory

n addresses from =3 to =E write

=! % != =! % != 28 28

values


(4.5 4.4 gasoline)

1isconnect immo and connect pin 6 with 7 in the wiring of immo plug to eliminate troubles with

speed signal




117/184


118/184

118


>enault ith C,




0mulator program no. /8

If you have older version without ESL2

programme, you have to solder jumpers J1, J2

and J

U0E

0(>(U0 32 ith C,

0(>(U0 34 ith C,

3-socket EAP@( ECU ith C, -

3-socket B$0C@ EC1! ECU ith C, - !P=8C3 memor

E70 3132 ith C,

E70 3134 ith C,

isconnect plug 9rom immo &UC@'/

ttention/

f your car doesnHt start use reset button

and two relays like the picture on the

left.

%irstl ou nee) to press the reset

.utton; 0econ)l turn the ignition on;

hir)l release the reset .utton an)

no ou can start the car;




119/184

11<


0(>(U0 32 ith C,

'ind 2


120/184

12=


n the addresses from 4=== to %%%# find

all +4 C or !4 values

and change these values and two units

before them into %% %% %% %%

;epeat it in the whole map from 4=== to

%%%!!!

(n or)er to start the starter ou nee) to *oin to pins o9 starterFs rela/

3-socket EAP@( ECU ith C, -


'ind




121/184

121


n address from == to =1% write == value

3-socket B$0C@ EC1! ECU ith C, - !P=8C3 memor





122/184

122


'ind !P=8C3 memory

n address from 1E to 1E8

and from 1EE to 1E% write == == values

$ther EC1! ECUs




123/184

123



'ind !P=8C3 memory

n address from 1E to 1E8

and 1EE to 1E% write == == values

t is possible to disconnected +,N from

0+@

E70 3132 ith C,




124/184

124



'ind 2


125/184

12!


E70 3134 ith C,


'ind 2


126/184

12+



all +4 C or !4 values




%%%!!!

Ever time ou ant to start the car ou have to turn the kes in the ignition #(CE .e9ore

it starts/

este) on vehicles:

0(>(U0 32 - Clio 1;2 8" 2==1

>enault 7egane (( G Clio (( 1;! C(

>enault ra9ic 1;


127/184

12


>enault ithout C,




@niversal ulie 0mulator program no. /*

>enault ithout C, ol) ECUs





U0E

0irius 32 ithout C,

0irius 34 ithout C,

E70 3132

1;< 2;2 an) 2;! Ci ithout C,

1;! Ci ithout C,

1;< i 1 plug

1;< i 2 plugs

1;< )iesel CU3

2;8 3;= gasoline 1 plug

"olvo 04= an) "4= 1;


128/184

128


0irius 32 ithout C,

'ind 2


129/184

12<


f there is 82C2!= C, trans)ucer on the plate in the 0+@# then the emulator will not work in

this 0+@!!!

0irius 34 ithout C,

'ind 2


130/184

13=



all values +4 C or !4




%%% !!!

Take power for the emulator from the capacitor at the flash

E70 3132




131/184

131


'ind 2


132/184

132


1;< 2;2 an) 2;! Ci ithout C,

n !P=8C3 memory

in the addressesJ

==3E ==3% ==4= ==41

and

==44 ==4! ==4+ ==4

change these values into %%

n 0+@# solder immo line (code) of emulator to the point as pictured




133/184

133


Take power for the emulator from the capacitor on the 0+@ plate

@nsolder //8 resistor

urn on the ignition 9or 3= secon)sthen turn it o99 9or 3= secon)s an) repeat the proce)ure a

9e times




134/184

134


1;! Ci ithout C,

+ar without tachometer

;eplace 2!=8= content and connect emulator.

"5 pin of processor is immo line as pictured# which must be raised.

Take power from the capacitor at the memory.

Co)e in*ectors an) settings ith Clip or Aaunch;




135/184

13!


1;< i 1 plug


+onnect the immo line of emulator to

pin *- of 0+@.

+onnect EN1 and ,++ to diode in the

0+@.




136/184

13+


Bend pin *- in 0+@ socket

1;< i 2 plugs

n the addresses from 14 to 1 and

1B to 1B

change these values into %% %% %% %% in

24C=4 memory




137/184

13



+ut off pin "* from wiring!!!




138/184

138


1;< )iesel CU3

;enault 2angoo ".- 1iesel 455"

n addresses from =2 to =! and 82 to 8!

change these values into == == %% %% in





139/184

13<


Pin 45 must be bent in socket or cut off from the car wiring.





140/184

14=


2;8

(;enault ascott)

n addresses from =4= to 1%% change these values into %% in 24C1+ memory





141/184

141


3;= gasoline 1 plug ith 24C=2 memor

(;enault >aguna)

Cut o99 pin != 9rom ECU///

n addresses from =! to =!% and from =%2 to =% change these values into %% in 24C=2 memory




142/184

142


"olvo 04= an) "4= 1;


143/184

143


0uDuki ith 24C=1 memor





0uDuki ith $5( memor




@niversal ulie 0mulator program no. /=

K 9ometimes# A48+5" and &2 programs work interchangeably




144/184

144


U0E

ECU ith 24C=1 memor

ECU ith $5( memor rea) as


145/184

14!


'ind $5( eeprom memory#

read and save as


146/184

14+






147/184


148/184

148


0uDuki ith


149/184

14<


'ind


150/184

1!=



mmo line e.g. socket + pin 7

(n )i99erent ECU tpes the immo line can .e in )i99erent pins; Hou check connection .eteen

ECU pin an) pin < o9 1+-pin $B socket ith a multimeter;

isconnect immo .o?/

0u.aru Just 1;3 4# 2===G2==1

'ind


151/184

1!1


n


152/184


153/184

1!3


Before removing immo# cut the immo cable off the 0+@ plug

0agem 0AE7$"A P>$CEU>E

,fter cutting the immo cable off# find pin 22 of 28%!12 or 2


154/184

1!4


f you have a problem with removing immo from the 0+@

3 disconnect LminusM battery for approF. /5 seconds before starting this procedure again#

3 during the procedure turn the starter several times

P(,$U (, 7E7$>H

(9 ou still have an pro.lems ith removing immo please atch the instructional vi)eo


http://www.carlabimmo.com/our-partnershttp://www.youtube.com/watch?feature=player_embedded&v=Y3yU4TowQB0#!http://www.carlabimmo.com/our-partners


155/184

1!!


Hamaha




@niversal ulie 0mulator program no. 8"

U0E

Hamaha motor.ikes

an) scooters 9rom 2==4 to 2=1=

H% >1 G H% >+

%+ , G %+ 0

-7

-7

"-7an) others




156/184

1!+


+onnecting 0mulator to the wiring is presented in the pictures belowJ

You connect code line by pressing the

;090T button. n order to start the

motorbike you firstly need to press and

hold the ;090T button# then turn the

ignition and then release the ;090T

button. Now you can start the engine.

he ires:

;ed with green stripe and grey 3 cover with insulation tape

f a fuel pump does not work during

turning the ignition# this is a symptom of

immobiliser malfunction.

n such an event# you can use this

emulator.




157/184

1!


9eat occupancy sensor programs

E,($,///

This emulator can only be used for testing purposes or to verify accurate functioning of ,irBag

system.

This emulator cannot remain in your car as a replacement for new seat occupancy mat

The emulator needs to be connected to the plug under the passenger seat instead of original seat

occupancy sensor.

There are / cables

Before connecting the emulator# use multimeter to check signals on pins in the plug!




158/184

1!8


,o;1 B7# without installed child seat


sol)er *umpers J1 an) J


@niversal ulie 0mulator

(9eat &ccupancy 9ensor program no. ")

U0E

ttention/

(9 still a9ter installation o9 the emulator our car signaliDes un9astene) passanger seat.elt

9ault then put in a resitor in place o9 seat.elt sensor;

%or E


159/184

1!<


,o;2 7erce)es - without installed child seat

(n Universal Julie Emulatorsol)er *umpers J2 an) J



(9eat &ccupancy 9ensor program no. 4)

,o;3 7erce)es - with installed child seat

(n Universal Julie Emulatorsol)er *umpers J1 J2 an) J



(9eat &ccupancy 9ensor program no. /)




160/184

1+=


U0E

- E-class #211 9rom 2==2 to 2==4 ith emic air.ag controller

- 0-class #22= 9rom 2==

Documents

Julie Immo Emulator