JS1000

SYSTEM

JS1000

SYSTEMPLATING

®

Indented Hex Washer HeadSelf-Drillers. Serrated Heads14-14 x 7/8”, 5/16-18 X 1- 1-1/4 - 1-1/2” SD35/16”, 7/16” & 3/8” Across Flats Stitch Point - #2 self drill

Indented Hex Washer HeadMachine Screws - Plain &Serrated Heads1/4 - 5/16 - 3/8” - 1/2” dia. up to 3”

Indented Hex Washer HeadSerrated Self-Drillers14-20 x 5/8” to 1”3/8” & 7/16” Across Flats#2 & #3 self-drill

Indented Hex Washer Head Serrated14-10 x 3/4”, 1”, 1-1/4”, 1-1/2” Type A1/4-14 x 3/4” Type ABBoth 3/8” or 7/16” Across Flats14-8 x 1” Low Root

Pan Socket Type A - ABTapping Screws6 x 5/8”, 8 x 3/4”, & 10 x 3/4”Other Sizes Available

Pan Head QuadrexSelf-Drillers8-18 x 1/2” #2 self-drill & #310-16 x 3/4” #3 self-drillOther Sizes Available

Indented Hex Washer Head(Lag Screw) Type A(5/16) 18-9 x 1-5/8”, 2”, 2-1/2”, 3”, 4”7/16” or 1/2” Across FlatsUnhardenedExtra high head available for special applications

Carriage bolts1/4-20 x 1/2”, 5/8”, 3/4”, 1”5/16-18 x 3/4”, 1”, 1-1/2”, 2”Other Sizes Available

Indented Extra High Hex Washer Head (Lag Screw) Type A20-9 x 1-3/4”, 2”, 3-1/4” (7/16” Across Flats)Unhardened, High-Head

Flat Head Carriage Bolts1/4-20 x 1-7/8”, 2”, 2-1/4”, 2-1/2”& 5/16-18 x 3/4” & 1” low profile3/8-16 x 1”

Knurled Track Bolts1/4-20 x 3/4” Flat Head5/16-18 x 3/4” Pan Head Phillips1/4-20 x 5/8”, 3/4” Truss Head3/8” x 3/4” & 1” Pan (Flat) Head

Short Neck Carriage Bolts1/4-20 x 1/2”, 5/8”, 3/4”5/16-18 x 3/4”, 1”3/8-16 x 7/8”

Flat Head, Round Head &Shoulder Rivets1/4”, 5/16”, 3/8” Diameter

Special Low ProfileCarriage Bolts5/16-18 x 3/4”,3/8-16 x 1”

UNC Finished Hex Nuts1/4”, 5/16”, 3/8”

Hex Washer Head Machine Screws1/4” - 5/16” - 3/8” to 3” long

Flat Washers - Lock Washers1/4”, 5/16”, 3/8”, 7/16”, 1/2” (Available from Leland Industries Inc.)

Serrated Flange Locking Nuts1/4”, 5/16”, 3/8” GR5

* NOTE: USING SERRATED HEX WASHER HEAD SCREWS & SERRATED HEX FLANGE LOCKING NUTS ELIMINATES THE NEED FOR FLAT & LOCK WASHERS. FASTENER HEADS CAN BE POWDER COATED RED FOR HIGH-STRESS OR DANGEROUS AREAS OF THE DOOR.

Guaranteed to outperformother premium coatings...at a fraction of the cost!

Master Overhead GaraGe dOOr

A Complete Line of Garage Door Fasteners • Expanded bolt offering up to 3/4” dia. x 6”

POINT-OF-PURCHASE DISPLAYS available for installers.KITS – 50 Pieces/Bag, 20 Bags/Sleeve.

Demand Leland “NF” & “L” head markings that guarantee 100% North American manufactured

fasteners made with North American steel.

All product is manufactured by Leland Industries Inc. with the exception of Flat and Lock Washers.

Red powder coated fasteners are available to define high stress areas.

YOUR

GUARANTEE OF HIGHEST QUALITY

100% MANUFACTURED IN NORTH AM

ERIC

ADT1700

SYSTEM

DT1700

SYSTEMLONGLIFE

®

ENHANCEDANTI-CORROSION

PROTECTION SYSTEM THATIS APPLIED TO ALL LELAND FASTENERS

1000 HOURS SALT SPRAY LIFE

SPECIALANTI-CORROSION

PROTECTION SYSTEM FOR ACQ

MATERIALS

1700 HOURS SALT SPRAY LIFE18 CYCLES

SO2 KESTERNICH

THE ULTIMATE CORROSION PROTECTION

SYSTEM. NO RISK OF HYDROGEN

EMBRITTLEMENT

PROVIDES UP TO 3000 HOURS OF RUST-FREE

PERFORMANCE IN SALT-SPRAY TESTS

POWDER COATING

THAT LASTS THE LIFE OF THE DOOR!

HIGH LUBRICITY ANTI-CORROSION

PROTECTION SYSTEM FOR

STAINLESS STEEL

Fasteners YOUR

GUARANTEE OF HIGHEST QUALITY

100% MANUFACTURED IN NORTH AM

ERIC

A

ACCREDITED

ACCREDITATION TO ISO / IEC – 17025SCOPE: MECHANICAL CERTIFICATION NUMBER: 1053.01

THERE ARE INTERNATIONAL AGREEMENTS OF MUTUAL RECOGNITION WITH EUROPE, THE AMERICAS AND PACIFIC RIM COUNTRIES

The ISO/IEC 17025 accreditation applies to mechanical testing and does not imply certification/approval of the products described. See the lab scope on our website for the specific tests covered by the accreditation.

This accreditation is restricted to the quality assurance laboratory located at the manufacturing plant and head office in Toronto, Ontario, Canada.

TESTING LABORATORY

EQUIPMENT• ACCREDITED TESTING LAB• ASSEMBLY• BOLT MAKERS• HEADING• NUT FORMING• NUT TAPPING• POINTING• POWDER COATING• SHANK SLOTTING• THREAD ROLLING• TOOL ROOM• TRIMMING• IN-HOUSE NZF3000 SERIES COATING LINE

BC, Port Coquitlam (604) 472-1041, Fax (604) 472-1051ALBERTA, Calgary (403) 252-4414, Fax (403) 259-8876 ALBERTA, Edmonton (780) 453-2766, Fax (780) 455-8261 QUEBEC, Joliette (450) 756-1441, Fax (450) 756-1678

1-800-263-3393, North America Wide www.lelandindustries.com

HEAD OFFICE (416) 291-5308 • FAX (416) 291-0305 • 95 COMMANDER BOULEVARD, TORONTO, ON, M1S 3S9, CANADA

FOR CANADIAN THREADALL: (519) 576-3360 • TOLL FREE: 1-877-777-2612 • FAX (519) 576-3991 • 130 TURNBULL COURT, CAMBRIDGE, ON, N1T 1J2, CANADA • www.threadall.com

BRANCHES

APRIL 2019

KANSAS, Shawnee (888) 292-6166, Fax (888) 292-6228MINNESOTA, Maplewood (651) 483-9990, (800) 388-3043, Fax (651) 484-2778 OKLAHOMA, Tulsa (918) 949-4023, (844) 260-2438, Fax (918) 949-4024