PAINTSQUARE.COM JOURNAL OF PROTECTIVE ......is seen in some batches of paint after mixing, and can also clog the spray tip. Repeatability tests were carried out with each coat-ing

© 2014-2015 Technology Publishing Co.

MARINE INDUSTRY COATING SYSTEMS: SELECTING AND SOURCING

jpclP A I N T S Q U A R E . C O M J O U R N A L O F P R O T E C T I V E C O A T I N G S & L I N I N G S

A JPCL eResource

©iStockphoto/HeliRy


i

Marine Industry Coating Systems: Selecting and Sourcing

A JPCL eBook

Copyright 2014-2015 byTechnology Publishing Company2100 Wharton Street, Suite 310Pittsburgh, PA 15203

All Rights Reserved

This eBook may not be copied or redistributed without the written permission of the publisher.


SPONSORED BY

Introduction

Field Application of Foul-Release CoatingBy Sang Ki Chi, Seung Hyun Kim, and Byung Wan KimInstitute of Industrial Technology, Samsung Heavy Industries Co., Ltd.

Coating System Guide for the Marine Industry

Coating Company Profiles

Contents

ii

iv

1

6

15

Strong Smooth Simple

STRONG• designed to withstand mechanical damage• simplify maintenance• reduce docking cost

SMOOTH• smooth and glossy surface providing a low drag out-of-dock performance

SIMPLE• simple application procedure• hull protection in only 2 coats

STRONG. SMOOTH. SIMPLE.

SeaLion Resilient is an effi cient biocide free underwater hull protection in only two coats.

The product is especially designed for vessels where maintenance simplicity and docking effi ciency is crucial. The strong surface of SeaLion Resilient signifi cantly reduces the risk of mechanical damage and maintains hull condition throughout the service period.

INTRODUCING THE WORLD’S FIRST RESILIENT ANTIFOULING

Click our Reader e-Card at paintsquare.com/ric Visit us at the International WorkBoat Show Booth #3542


iv

IntroductionThis eBook features an article from the Journal of Protective Coatings & Linings(JPCL) about the environmental and cost benefits of employing silicone foul-re-lease coatings for marine and offshore use, as well as JPCL Buying Guide datapertaining to selecting and specifying coatings for marine application. All informa-tion about the article and materials is based on the original dates of publication ofthese materials in JPCL.

The Buying Guide is organized by various exposure types and substrates. Coatingmanufacturers are listed in alphabetical order, with each company’s preferred sys-tem named in both proprietary and generic terms. Finally, contact details are givenfor all the companies.

This collection is designed to provide general guidance on selecting and specify-ing coatings, as well as furnish information about sources in order to acquire theappropriate systems. Please visit www.paintsquare.com/bg to refine searches andapply parameters to Buying Guide data such as industry, exposure, substrate,company name or product name.



By Sang Ki Chi, Seung Hyun Kim, and Byung Wan KimInstitute of Industrial Technology, Samsung Heavy Industries Co., Ltd.

Field Application of Foul-Release Coatingo-friendly technologies are currently on the rise in most

marine and offshore industries. Ship owners, ship-

builders, and paint manufacturers are engaged in the re-

duction of VOCs and CO2 emissions. Aside from

decreasing environmental impact, low-friction hull coat-

ings in particular are becoming popular with ship owners as an

effective method of operational cost reduction. Many ship own-

ers prefer to use silicone foul-release coating (FRC); however,

this material requires more care with application than that of

conventional self-polishing copolymer anti-fouling coating (SPC

A/F). Consequently, shipbuilders are concerned with FRC appli-

cation not only during construction, but also after delivery.

This article describes a study conducted during which the au-

thors investigated several potential defects of field-applied FRC,

and made suggestions about how to avoid them.

Normally FRC is applied as shown in Figure 1. FRC can be ap-

plied at the block painting stage or during a redocking stage.

C

Fig. 1: Application flow chart showing process components of surfacetreatment, anti-corrosive coating application and FRC application in bothblock and redocking stages. All figures courtesy of the authors.

1

©iStockphoto/OleksandrKalinichenko


Seeding

Flocculation of solid material by a physical or a chemical reac-

tion can result in seeding, which is the formation of large parti-

cles referred to as gels. This event does not always occur, but it

is seen in some batches of paint after mixing, and can also clog

the spray tip. Repeatability tests were carried out with each coat-

ing type by sampling several batches of material and observing

the reaction time with air. Silicone coatings are very sensitive to

atmospheric moisture, even under winter conditions. Reaction

test results of each component to moisture (base, curing agent,

and catalyst) noted that only the catalyst (Part C) reacted with air

after five minutes of exposure (Fig. 3). The catalyst changed into

a gel state by itself.

As a result of this test, it is recommended that FRC should be

carefully handled by mixing each component just before applica-

tion. Catalysts should not be opened earlier than 10 minutes be-

fore mixing to prevent reaction with moisture.

Pin Holes

Even with effective surface treatment, pin holes may still be de-

tected and may be due to one of the following causes. If the ves-

sel has been immersed in the sea water for more than six

months, especially in the summer season, holes can form from

biocide leaching out from the film and can cause a capillary phe-

nomenon.

Considerations During ApplicationSpray Dust

Compared to conventional coatings, applying silicone-based,

anti-fouling coatings by airless spray can produce a large

amount of spray dust, which can easily lead to a surface contam-

ination issue. This problem occurs even when FRC is applied

under protection nets installed around the vessel from top to

bottom. Spray dust can also travel around the building dock con-

taminating other vessels under construction. In order to remove

the overspray dust, a method such as high-pressure water jet-

ting should be used. The builder should reinforce protection

methods such as employing containment and broadening the

protection area. Figure 2 shows the installed protection net.

Ventilation

When FRC is applied at the dry dock, a protective system should

be installed (as above), which means that these areas become

enclosed spaces, which presents a risk of explosion caused by

solvent saturation. It therefore becomes necessary for the

builder to analyze the flow path of air and arrange for the use of

proper ventilation equipment.

Fluid analysis of solvents suggested that to provide proper

ventilation and keep exposure limits at acceptable levels, the op-

timum arrangement of fans can be calculated by the size and

geometry of both the dock and the ship, and the part or parts

being sprayed.

Fig. 2: Installation of the protection net

Fig. 3: Gelling of catalyst initially (left) and after five minutes (right)

Fig. 4: Specimens of cissing simulation test: dry (left), water spray (center), and condensation (right).

2


As mentioned previously, FRC can be applied during the re-

docking stage before sea trials. In this case, a conventional anti-

fouling coating is applied at the block-painting stage to prevent

excessive sea organisms from attaching to the hull during moor-

ing at the quay side. Therefore, FRC should be applied only after

high-pressure washing and power-tool cleaning to remove sea

organisms at the dock.

Secondly, after surface preparation, contamination such as the

product of a reaction between copper oxide and sea water can re-

main on the film surface. Thus, a mist coat (or sealer coat) is rec-

ommended after fresh water washing to remove surface

contamination.

Cissing

This defect is known as a kind of wetting problem caused by oil

or other contaminants on the surface. Cissing can occur when

the surface is contaminated by low surface tension material, but

this condition was found on the FRC finish coat in the late after-

noon and was presumed to be caused by moisture condensation

on the surface. Accordingly, reproducibility tests were carried

out to simulate the actual conditions.

Moisture condensation, water spray and dry specimens were

prepared. An FRC finish was then applied to every specimen.

After the test, the wetted panels caused cissing. The dry one did

not (Fig. 4). This means that the surface condition is very impor-

tant, because FRC may easily create this defect by its hydropho-

bic property. The coating inspector and manager in charge of the

painting project should carefully check the surface condition be-

fore FRC application.

After ApplicationMechanical Damage

Silicone FRC has a good surface appearance, but the coating film

does not have great strength. Therefore, FRC films are easily

susceptible to mechanical damage even though the coating ma-

terial is cured. This damage can result in not only partial detach-

ment of film, but also in large areas of delamination. There are

many potential reasons; low temperature, low film thickness, or

exceeding the recoating interval between the anti-corrosive and

the tie coat/finish coat. It is crucial to carefully manage these

variables before and after application.

Vessel Slippage

Vessel slippage on the support blocks in the dry dock during the

block-build stage, and at the redocking stage, was shown to

damage the FRC paint film. Initially, this vessel slippage was

thought to be due to an uneven surface in the dock; however, the

surfaces were found to be flat.

Vessel slippage was assessed in various tests. First, frictional

resistance was evaluated with two coating schemes: a conven-

tional SPC A/F coating and FRC (Table 1).

Test specimens were fully cured and then friction tests (based

on a modified ice friction test for ice-going vessels) were car-

ried out. In this test, the specimens were moved forward and

backward horizontally under pressure, based on the yard prac-

tice, and the frictional resistance was measured. (The average

support block pressure is about 40kg/cm2.)

To mimic the support blocks used in practice, two types were

�Table 1: Coating Schemes of Test Specimens

No. of coat SPC A/F FRC

1st Epoxy Anti-Corrosive 150 µm� Epoxy Anti-Corrosive 150 µm��

2nd Epoxy Anti-Corrosive 150 µm� Epoxy Anti-Corrosive 150 µm�

3rd Epoxy Tie Coat 100 µm� Silicone Tie Coat 100 µm��

4th SPC A/F 150 µm� Silicone Finish Coat 150 µm�

Fig. 5: New concept block composition (left), and normal block composition (right)

Table 2: Friction Resistance Test Results

Paint Block Friction Value (kg)Type Remarks

Min. Max.

SPC A/F A N/A N/A Laminating film pushed out

B 305 361 Damaged

FRC A 34 58 No damage

B 37 60 Damaged

3


mocked up for the resistance testing as shown in Figure 5. The

block on the left is a new concept developed in an attempt to re-

duce mechanical damage of film. The block on the right is the

general composition of support blocks used in the yard.

After the friction test, the SPC A/F was found to have a higher

friction resistance than the FRC (Table 2). The tendency for me-

chanical damage is higher in the normal support block type than

in new concept one (Fig. 6, p. 28).

The friction tests showed that FRC has a slippery surface, and

how this contributes to film damage was further evaluated. The

surface condition of the two paint systems was observed under

load in the laboratory. The SPC A/F surface had no change be-

fore and after the load being applied, but in the case of the FRC,

the coating film was squeezed out around the support block after

loading. This might be caused by film properties due to the FRC

film being very soft and slippery. The stress can be associated

with thermal effects such as contraction or expansion from weld-

ing and fluctuation between day and night temperatures. Figure

7 shows the squeezed film, and Figure 8 illustrates the slippage

theory of FRC.

In an effort to improve the support block composition and pre-

vent slippage, we added a laminating film on the normal block in

the dry dock stage, and inserted a cotton cloth between the hull

and the block to increase friction resistance in the redock stage

Fig. 6: Surface condition of each specimen withdifferent support block: SPC A/F, new conceptblock (top left), SPC A/F, normal block (top right),FRC, new concept block (bottom left) andFRC, normal block (bottom right)

Fig. 7: Surface condition of each coating under loading; SPC A/F (left) andFRC (right)

Fig. 8: The concept of slippage theory of FRC

Fig. 9: Composition of support block in the dry dock stage (left)and the redock stage (right)

4


(Fig. 9). Since adopting these two methods, the slippage phe-

nomenon has not occurred.

ConclusionsRegarding each potential issue discussed thus far, the following

conclusions can be reached.

• It is impossible not to generate spray dust, but workers can mini-

mize the quantity and spread of dust by using proper spray pres-

sure on the pump and adequate containment at the work site.

• When FRC spray work is conducted in an enclosed place, a venti-

lation system should be considered.

• During FRC spray application, coating materials should be ex-

posed to moisture for the shortest amount of time possible. It is

very important to carefully inspect the substrate condition before

coating application.

• In order to avoid film damage, application project supervisors

should pay particular attention to environmental and drying condi-

tions.

• The structure (or block) to which FRC is being applied might have

propensity to slip, thus supporting material should be carefully

considered.

• FRC is a product with novel technology and beneficial properties

especially from an environmental point of view. However, to make

effective use of this material, advanced application skills should be

adapted to optimize its performance.

References1. Takeyuki Tanaka, “The Physical properties and its evaluation

method for paint and film,” The Society of Adhesion and

Interface Korea, pp. 343–353 (1992).

2. M. Hess, H.R. Hamburg, “Hess’s Paint Film Defects,” London

Chapman and Hall, pp. 16–17, 177–180 (1979).

3. C. S. Seo, J. M. Lee, “The Paint Physical Engineering,” Pukyung

National University, pp. 167–169 (1992).

About the Authors:Sang Ki Chi

Since September of 2002, Mr. Chi has been the senior research en-

gineer in the coating and corrosion research department at the In-

stitute of Industrial Technology for Samsung

Heavy Industries. His area of focus includes

coating materials and application methods for

marine and offshore field use.

Mr. Chi has received technical awards from

The Society of Naval Architects of Korea and is

a working group member of IMO for PSPC, and a member of The

Corrosion Science Society of Korea. He holds a master’s degree

from Korea Maritime and Ocean University and a bachelor’s de-

gree from Pukyung National University, as well as certifications

from FROSIO (Inspector Level 3) and ICorr (Fire Proofing Inspector

Level 2).

Seung Hyun Kim

Mr. Kim is a research engineer and has been with

Samsung Heavy Industries for more than 18

years. His primary experience is with material

analysis, carrying out performance testing of

anti-corrosive and anti-fouling coatings as well

as special materials for use in marine coatings.

Byung Wan Kim

Mr. Kim is an assistant engineer and has been

with Samsung Heavy Industries for 10 years.

His experience is in evaluation and testing of

materials for use in protective and marine

coatings, as well as developing test equip-

ment for special performance tests such as

ice friction testing. JPCL

5


6

ABRI IndustriesIronBond 111Inorganic Zinc/Epoxy/Urethane

Altex Coatings Ltd.CarbolineOrganic Zinc/Epoxy/Urethane

ARC Composites, Div. of A.W. ChestertonARC S1Epoxy 100% Solids (1 or 2 coats)

Burke Industrial CoatingsBurke Liquid Stainless SteelEpoxy Flake Filled/Epoxy Flake Filled

Carboline CompanyCarboguardOrganic Zinc/Epoxy/Urethane

Chemco International Ltd.RS 500P, RA 500M & RC 500GTCEpoxy (1-2 coats)/Acrylic (1-2 coats)

Cloverdale Paint, Inc.ArmourshieldEpoxy (1-2 coats)/Urethane

Concrete Solutions Products by Rhino LiningsConcrete Solutions HP UrethaneUrethane/Urethane

Corporacion Mara SASigma CoatingsInorganic Zinc/Epoxy/Urethane

Corrocoat USA, Inc.Polyglass ZipcoatPolyester/Polyester/Polyester

Corroseal/Rodda Paint Co.Corroseal Rust Converter PrimerOther

Cote-L Industries, Inc.Durabak 18 M-26/Durabak 18Urethane/Urethane

Crossfield Products Corp.Dex-O-TexEpoxy (1-2 coats)/Urethane

CSL Silicones, Inc.Si-Coat 580Siloxane/Siloxane

Dampney Co., Inc.EpodurOther

Daubert CromwellNox-Rust 3100GWax

Diamond Vogel Paint CompanyEndura-Zinc 768/Mult-E-Prime 500/Multi-Thane 330Organic Zinc/Epoxy/Urethane

Dunn-EdwardsMultiple Brand OptionsInorganic Zinc/Epoxy/Urethane

Duromar, Inc.HPL-1110 / HPL-1110Epoxy 100% Solids (1 or 2 coats)

ENECON CorporationChemcladEpoxy 100% Solids (1 or 2 coats)

Eoncoat, LLCEonCoat 0 VOCOther

FSC Coatings, Inc.Rustop/Bio-Safe MaxLifeAlkyd/Acrylic/Acrylic

G.O.A. Enterprises - Agent for Chemco Int’l Ltd.Chemco InternationalZinc-Rich, Organic

Gemite Products, Inc.Gem-Cote EP 100Epoxy 100% Solids (1 or 2 coats)

Global EcoTechnologiesEndura-FlexUrethane Elastomeric (1 coat)

Grace DistributingLifeGuard Active Rust PrimerOther

Gulf Coast Paint Mfg., Inc.GCPEpoxy (1-2 coats)/Urethane

Hempel (USA) Inc.17630-3/17630-3/5595UEpoxy (1-2 coats)/Urethane

Highland International, Inc.325R Dry-Fall Zinc-Rich Epoxy Prime/475R Dry-FallOrganic Zinc/Epoxy/Urethane

HJ3 Composite TechnologiesHJ3 CarbonSeal Industrial SystemsEpoxy/Epoxy Novolac/Epoxy Novolac

Hydrex Underwater TechnologyEcospeed/EcoshieldVinyl Ester/Vinyl Ester/Vinyl Ester

Induron Coatings, Inc.Perma-GlossOrganic Zinc/Epoxy/Fluorourethane

Industrial Coatings & SealantsPolycoatPolyurea Hybrid (1, 2, or 3 coats)

Industrial Nanotech, Inc.Nansulate PTThermal Spray

International Polyurethane SystemsAL6000Polyurea Pure (1, 2, or 3 coats)

ITW Polymers Coatings North AmericaAS-550Epoxy/Epoxy/Epoxy

Listings are alphabetized by company name.

Exterior Superstructures Marine,Weathering, & UVSteel

SPONSORED BY


Coating System Guide for the Marine Industry


7

Jotun Paints, Inc.Barrier/Jotamastic/HardtopOrganic Zinc/Epoxy/Urethane

KCC Corrosion Control Co., Ltd.Techni-Plus UR-5Urethane/Urethane

Kopak IndustriesKopakEpoxy (1-2 coats)/Urethane

LonzaCopper OmadineOther

Madison Chemical IndustriesMariThane Liquid Zinc/MariThane 1:4 AliphaticMCU Zinc Rich/Urethane/Urethane

MascoatMM-DTMAlkyd/Acrylic/Acrylic

Nukote Coating Systems InternationalNukote PA IIPolyurea Pure (1, 2, or 3 coats)

Peerless Industrial SystemsEpigenEpoxy 100% Solids (1 or 2 coats)

Polibrid Coatings, Inc.Polibrid 705Urethane Elastomeric (1 coat)

PPC Coatings (MTR)PPC CoatingsOther

PPG Protective & Marine CoatingsAT240/AT450HEpoxy (1-2 coats)/Urethane

Precision Coatings, Inc.PC5Siloxane/Siloxane

Premier Coating Systems, Inc.PCS-#1111/PCS-#4300Epoxy (1-2 coats)/Fluoropolymer

Randolph ProductsRandogrip Navy GOther

Rhino Linings CorporationRhino Linings SolarMaxPolyurea Pure (1, 2, or 3 coats)

Riley Paint CompanyRiley PaintEpoxy (1-2 coats)/Urethane

Rodda Paint Co./Cloverdale PaintClovaMastic/ArmourshieldEpoxy (1-2 coats)/Urethane

Roval USA Corp.Roval R22 Cold Galvanizing CompoundZinc-Rich, Organic

Rust Bullet, LLCRust Bullet StandardOther

Sauereisen, Inc.SauereisenUrethane/Urethane

Seal For Life IndustriesStopaq WrappingbandTape Wraps

Sherwin-WilliamsSeaguard 5000HS / Acrolon 218Epoxy (1-2 coats)/Urethane

Simpson Strong-TieFX-480, FX-442 Protective Ctg.Epoxy (1-2 coats)/Urethane

SpecguardSG-E375-08Polyurea Pure (1, 2, or 3 coats)

Specialty Products, Inc. (SPI)Ultra Bond-100, AMP 100, CAP 100Polyurea Pure (1, 2, or 3 coats)

Subsea Industries NVEcospeedVinyl Ester/Vinyl Ester/Vinyl Ester

Termarust TechnologiesTermarust TR2000 HR CSA SeriesCalcium Sulphonate

Tesla NanoCoatings, Inc.TeslanOrganic Zinc/Epoxy/Urethane

ThermionThermionThermal Spray

3M Corrosion Protection ProductsScotchkoteFusion-Bonded Epoxy (1-2 coats)

TMS Metalizing Systems, Ltd.TMS Metalizing SystemsThermal Spray

U.S. Coatings, LLCMasticGrip/UreGripEpoxy (1-2 coats)/Urethane

VersaFlex IncorporatedFSS 50 DMPolyurea Pure (1, 2, or 3 coats)

Wasser CorporationWasserMCU/MCU/MCU

Watson Coatings, Inc.Aqua-ShieldAlkyd/Acrylic/Acrylic

Wilko Paint, Inc.WilkoOrganic Zinc/Epoxy/Urethane

ZRC WorldwideZRC-221 Cold Galvanizing CompoundZinc-rich, organic

Exterior Deck Plate Abrasion, Marine, Weathering, & UVSteel


Altex Coatings Ltd.CarbolineEpoxy/Epoxy Flake Filled/Epoxy Flake Filled

ARC Composites, Div. of A.W. ChestertonARC S1, ARC 855NEpoxy 100% Solids (1 or 2 coats)

Arma CoatingsArma 901 & PolyasparticPolyurea Pure (1, 2, or 3 coats)

Benjamin Moore & Co.Corotech Epoxy Mastic Coating V160Epoxy/Epoxy/Epoxy

Burke Industrial CoatingsBurke Liquid Stainless SteelEpoxy/Epoxy Flake Filled/Epoxy Flake Filled

Carboline CompanyCarbothaneOrganic Zinc/Epoxy/Urethane

Chemco International Ltd.RS 500P, RA 500M & RC 500GTCEpoxy (1-2 coats)/Acrylic (1-2 coats)

CIM IndustriesCIMUrethane Elastomeric (1 coat)

Cloverdale Paint, Inc.ClovaGuard/ArmoursieldEpoxy (1-2 coats)/Urethane


Corporacion Mara SASigma CoatingsEpoxy (1-2 coats)/Urethane



Cote-L Industries, Inc.Durabak18 M-28/Durabak18 M-26 SmoothUrethane/Urethane

Crossfield Products Corp.Dex-O-TexEpoxy (1-2 coats)/Urethane

CSL Silicones, Inc.Si-Coat 580Siloxane/Siloxane

Denso North AmericaDensoPolyester/Polyester/Polyester

Diamond Vogel Paint CompanyMult-E-Poxy 180/Multi-Thane 330Epoxy (1-2 coats)/Urethane

The Dow Chemical CompanyVorastarPolyurea Hybrid (1, 2, or 3 coats)

Dunn-EdwardsMultiple Brand OptionsEpoxy/Epoxy/Siloxane

Duromar, Inc.HPL-2221-UV / HPL-2221-UVEpoxy 100% Solids (1 or 2 coats)



Euclid Chemical CompanyFlexolith 2000GEpoxy/Epoxy/Epoxy

FSC Coatings, Inc.Rustop 6000 SystemUrethane/Urethane


Gemite Products, Inc.Fibre-PrimeOther

Global EcoTechnologiesEndura-TufUrethane Elastomeric (1 coat)


SPONSORED BYMarine Industry


SPONSORED BY

8

Gulf Coast Paint Mfg., Inc.GCPEpoxy/Epoxy/Epoxy

Hempel (USA) Inc.17630-3/17630-3/5595UEpoxy (1-2 coats)/Urethane



Induron Coatings, Inc.Perma-Tuff SLEpoxy 100% Solids (1 or 2 coats)


International Polyurethane SystemsAL6000Polyurea Pure (1, 2, or 3 coats)

ITW Polymers Coatings North AmericaAS-550Epoxy/Epoxy/Epoxy

Jotun Paints, Inc.Barrier/Jotamastic/HardtopOrganic Zinc/Epoxy/Urethane

KCC Corrosion Control Co., Ltd.Techni-Plus UR-5Urethane/Urethane

Key Resin CompanyPlasti-ChemieMethyl Methacrylate/Methyl Methacrylate

Kopak IndustriesKopakAlkyd/Alkyd/Silicone Alkyd

Madison Chemical IndustriesMariThane Liquid Zinc/MariThane 1:4 AliphaticMCU Zinc Rich/Urethane/Urethane

NIC IndustriesPrismaticPolyester/Polyester/Polyester

Nukote Coating Systems InternationalNukote STPolyurea Pure (1, 2, or 3 coats)



Polycoat ProductsPolyeuro 7502Polyurea Pure (1, 2, or 3 coats)

Polyval CoatingsPolyurUrethane/Urethane


PPG Protective & Marine CoatingsAT235/AT237MEpoxy/Epoxy 100% solids

Randolph ProductsRandogrip Navy GOther

Rhino Linings CorporationRhino Linings SolarMaxPolyurea Pure (1, 2, or 3 coats)

Riley Paint CompanyRiley PaintEpoxy (1-2 coats)/Urethane

Rodda Paint Co./Cloverdale PaintClovaMastic/ArmourshieldEpoxy (1-2 coats)/Urethane


Rust Bullet, LLCRust Bullet Clear ShotOther



Sherwin-WilliamsSeaguard 5000HS/Acrolon 218Epoxy (1-2 coats)/Urethane

Simpson Strong-TieFX-761M, FX-442 Protective Ctg.Epoxy (1-2 coats)/Urethane


Specialty Products, Inc. (SPI)Ultra Bond-100, AMP 100, CAP 100Polyurea Pure (1, 2, or 3 coats)

SpeedCove, Inc. DBA Solid Rock EnterprisesSpeedCove Precast Cove Base SystemsOther


Termarust TechnologiesTermazinc TZ1000 SeriesZinc-Rich, Organic

Tesla NanoCoatings, Inc.TeslanOrganic Zinc/Epoxy/Urethane


Thin Film Technology, Inc.Bio-Gard 251/257/258Epoxy/Epoxy 100% solids




Wilko Paint, Inc.WilkoOrganic Zinc/Epoxy/Urethane

Marine Industry


9

Interior MildSteel

ABRI IndustriesIronBond 111Organic Zinc/Epoxy/Urethane

Altex Coatings Ltd.CarbolineOther

ARC Composites, Div. of A.W. ChestertonARC S1Epoxy/Epoxy 100% solids

Arma CoatingsArma 901 50DSPolyurea Pure (1, 2, or 3 coats)


Burke Industrial CoatingsBurke Liquid Stainless SteelEpoxy Flake Filled/Epoxy Flake Filled

Carboline CompanyCarboguardEpoxy (1-2 coats)/Urethane

Chemco International Ltd.RS 500P & RA 500MEpoxy/Epoxy 100% solids

Cloverdale Paint, Inc.ClovaGuardEpoxy/Epoxy/Epoxy


Corporacion Mara SASigma CoatingsEpoxy/Epoxy/Epoxy

Corrocoat USA, Inc.Plasmet ZFEpoxy (1-2 coats)/Acrylic (1-2 coats)


Cote-L Industries, Inc.Durabak M-26/Durabak M-26 SmoothUrethane/Urethane

Crossfield Products Corp.Dex-O-TexEpoxy/Epoxy/Epoxy

Dampney Co., Inc.ThurmaloxOther

Daubert CromwellNox Rust 3100GWax

Denso North AmericaDensoPolyester/Polyester/Polyester

Diamond Vogel Paint CompanyIron Prime 600/Finium DTM-ATAlkyd/Acrylic/Acrylic

Dunn-EdwardsMultiple Brand OptionsEpoxy/Epoxy/Epoxy

Duromar, Inc.HPL-1110/HPL-1110Epoxy 100% Solids (1 or 2 coats)

ENECON CorporationEneseal CROther


ErgonArmor NovocoatNovocoat SP2000Epoxy Novolac (1 or 2 coats)

FSC Coatings, Inc.Rustop/Bio-Safe MaxLifeAlkyd/Acrylic/Acrylic




Gulf Coast Paint Mfg., Inc.GCPEpoxy/Epoxy/Epoxy

Hempel (USA) Inc.12050/12050/52140Alkyd/Alkyd/Alkyd

Heresite Protective Coatings, LLCVR-500Other


HydraTech Engineered ProductsWaterline 8001Epoxy/Epoxy 100% solids

Hy-Tech Thermal SolutionsMetal ShieldCalcium Sulphonate

Induron Coatings, Inc.Perma-Clean IIEpoxy/Epoxy/Epoxy

Industrial Coatings & SealantsPolycoatPolyurea Hybrid (1, 2, or 3 coats)


International Polyurethane SystemsSPR3002Polyurea Hybrid (1, 2, or 3 coats)

ITW Polymers Coatings North AmericaAs-175Epoxy/Epoxy/Epoxy

Jotun Paints, Inc.Pilot QD Primer/Pilot II/Pilot IIAlkyd/Alkyd/Alkyd

KCC Corrosion Control Co., Ltd.Techni-Plus EP14Epoxy Flake Filled/Epoxy Flake Filled

Key Resin CompanyKey Lastic MEEpoxy/Epoxy 100% solids

Kopak IndustriesKopakOrganic Zinc/Siloxane


Monopole, Inc.Permashield 200Urethane/Urethane

NIC IndustriesPrismaticEpoxy/Polyester/Polyester

NSP Specialty ProductsNSP-120 High Performance Epoxy CoatingEpoxy 100% Solids (1 or 2 coats)




Polyval CoatingsPolyflexPolyurea Hybrid (1, 2, or 3 coats)


PPG Protective & Marine CoatingsAT185H/AT5450Alkyd/Alkyd/Alkyd

Precision Coatings, Inc.PC6Urethane/Urethane

Rhino Linings CorporationRhino ExtremePolyurea Pure (1, 2, or 3 coats)

Riley Paint CompanyRiley PaintAlkyd/Alkyd/Alkyd

Rodda Paint Co./Cloverdale PaintMaine Enamel 74903Alkyd/Alkyd/Alkyd


Royal Chemical Corp.Royal Void KoteCoal Tar/Asphalt




Sherwin-WilliamsSeaguard 1000 EnamelAlkyd/Alkyd/Alkyd

Simpson Strong-TieFX-480, FX-442 Protecitve Ctg.Epoxy (1-2 coats)/Urethane


Specialty Products, Inc. (SPI)Ultra Bond-100, Polyshield HT-100F UB, AMP 100Polyurea Pure (1, 2, or 3 coats)



SPONSORED BY

SpeedCove, Inc. DBA Solid Rock EnterprisesSpeedCove Precast Cove Base SystemsOther


Tesla NanoCoatings, Inc.TeslanOrganic Zinc/Epoxy/Epoxy


U.S. Coatings, LLCMultiGripAlkyd/Alkyd/Alkyd



Watson Coatings, Inc.Aqua-ShieldEpoxy (1-2 coats)/Acrylic (1-2 coats)

Wilko Paint, Inc.WilkoOrganic Zinc/Epoxy/Epoxy

Wolverine Coatings CorporationChemShieldEpoxy 100% Solids (1 or 2 coats)

ZRC WorldwideZRC-221 Cold Galvanizing CompoundZinc-rich, organic

Below Water LineSteel

ABRI IndustriesIronBond 111 w/TC421Organic Zinc/Epoxy 100% Solids

Altex Coatings Ltd.CarbolineEpoxy/Epoxy/Epoxy

ARC Composites, Div. of A.W. ChestertonARC S2Epoxy/Epoxy 100% Solids

BASF Corporation Construction SystemsA-P-EEpoxy/Epoxy 100% Solids


Carboline CompanyBitumasticEpoxy Coal Tar/Epoxy Coal Tar

Chemco International Ltd.RS 500P & RA 500MEpoxy/Epoxy 100% Solids

ChemCo SystemsCCS Marine CoatingEpoxy/Epoxy 100% Solids

Corporacion Mara SASigma CoatingsEpoxy Coal Tar/Epoxy Coal Tar


Denso North AmericaSeaShield/DensoOther

Diamond Vogel Paint CompanyMult-E-Poxy 180Epoxy/Epoxy/Epoxy



Duromar, Inc.HPL-2510 / HPL-2510-FREpoxy 100% Solids (1 or 2 coats)



ErgonArmor NovocoatNovocoat SP2000Epoxy/Epoxy 100% solids


Gemite Products, Inc.Fibre-PrimeOther



Gulf Coast Paint Mfg., Inc.Poly ChemEpoxy/Epoxy 100% Solids

Hempel (USA) Inc.17630-3/17630-3/45182/76600/76600Other



Hydrex Underwater TechnologyEcospeedVinyl Ester/Vinyl Ester/Vinyl Ester

Induron Coatings, Inc.PermaSafe 100 Ceramic EpoxyEpoxy 100% Solids (1 or 2 coats)

Marine Industry

10


11

International Polyurethane SystemsP2001Polyurea Pure (1, 2, or 3 coats)

Jotun Paints, Inc.Jotamastic 90 Al/Jotamastic 90 GF/Jotamastic 90Epoxy/Epoxy Flake Filled/Epoxy Flake Filled

KCC Corrosion Control Co., Ltd.Techni-Plus VE 62Vinyl Ester/Vinyl Ester/Vinyl Ester

Kopak IndustriesKopakPhenolic/Fusion-Bonded Epoxy

LonzaCopper OmadineOther

NIC IndustriesPrismaticEpoxy/Polyester/Polyester






PPG Protective & Marine CoatingsAmercoatEpoxy/Epoxy/Epoxy


Rodda Paint Co./Cloverdale PaintClovaMasticEpoxy/Epoxy/Epoxy



Seacoat TechnologySeapoxy 85/Sea-SpeedEpoxy/Epoxy/Siloxane


Sherwin-WilliamsFast Clad EREpoxy 100% Solids (1 or 2 coats)

Simpson Strong-TieFX-70-9 Protective Ctg.Epoxy 100% Solids (1 or 2 coats)


Specialty Products, Inc. (SPI)Polyshield HT, Polyshield Hi-E, Polyshield HT-100F UPolyurea Pure (1, 2, or 3 coats)


Termarust TechnologiesTermazinc TZ1000 SeriesZinc-Rich, Organic



Thin Film Technology, Inc.Bio-Gard, Bio-DurEpoxy/Epoxy 100% solids

3M Corrosion Protection ProductsScotchkoteFusion-Bonded Epoxy (1-2 coats)


U.S. Coatings, LLCMasticGripEpoxy Coal Tar High Build (1 or 2 coats)


Wasser CorporationWasserMCU Coal Tar/MCU Coal Tar/MCU Coal Tar

Wilko Paint, Inc.WilkoEpoxy Coal Tar High Build (1 or 2 coats)


Ballast Tank LiningsSteel

ABRI IndustriesIronBond 111 w/TC421Inorganic Zinc/Epoxy 100% solids


AmTech Tank Lining & Tank RepairDuraChem 580 MarinePolyurea Hybrid (1, 2, or 3 coats)

ARC Composites, Div. of A.W. ChestertonARC S1 / S1HBEpoxy 100% Solids (1 or 2 coats)

Arma CoatingsArma 901 55Polyurea Pure (1, 2, or 3 coats)

Carboline CompanyCarboguardEpoxy/Epoxy/Epoxy


Corporacion Mara SASigma CoatingsEpoxy/Epoxy Phenolic/Epoxy Phenolic

Corrocoat USA, Inc.Polyglass VEFVinyl Ester/Vinyl Ester/Vinyl Ester

Cote-L Industries, Inc.Durabak M-26 SmoothUrethane/Urethane

Daubert Chemical, Co.Saci 2200ACalcium Sulphonate

Denso North AmericaDensoOther



Duromar, Inc.HPL-2510/ HPL-2510Epoxy 100% Solids (1 or 2 coats)






Gulf Coast Paint Mfg., Inc.Poly ChemEpoxy/Epoxy Flake Filled/Epoxy Flake Filled

Hempel (USA) Inc.17630-3/17630-3/17630-3Epoxy/Epoxy/Epoxy

Heresite Protective Coatings, LLCCSE-6200Epoxy/Epoxy/Epoxy




Induron Coatings, Inc.PermaSafe 100 Ceramic EpoxyEpoxy/Epoxy 100% Solids


Jotun Paints, Inc.Balloxy HB LightEpoxy/Epoxy/Epoxy

KCC Corrosion Control Co., Ltd.Techni-Plus VE 62Vinyl Ester/Vinyl Ester/Vinyl Ester



SPONSORED BY

Kopak IndustriesKopakCoal Tar/Asphalt

Madison Chemical IndustriesMariThane II PW UltraPolyurea Hybrid (1, 2, or 3 coats)


Nukote Coating Systems InternationalNukote STPolyurea Pure (1, 2, or 3 coats)

Peerless Industrial SystemsEpigenEpoxy/Epoxy 100% solids


Polycoat ProductsPolyeuro 1050HUrethane Elastomeric (1 coat)

Polyval CoatingsPolyflexPolyurea Pure (1, 2, or 3 coats)


PPG Protective & Marine CoatingsAT240/AT240Epoxy/Epoxy/Epoxy

Premier Coating Systems, Inc.PCS-#1100Other

Raven Lining SystemsRaven Lining SystemsEpoxy 100% Solids (1 or 2 coats)


Rodda Paint Co./Cloverdale PaintClovaLineEpoxy Novolac (1 or 2 coats)

Royal Chemical Corp.Royal Easy KoteCoal Tar/Asphalt



Seacoat TechnologyNova-SilOrganic Zinc/Epoxy/Siloxane

Seal For Life IndustriesStopaq WrappingbandThermal Spray

Sherwin-WilliamsFast Clad EREpoxy 100% Solids (1 or 2 coats)

Simpson Strong-TieFX-464 Chemical-Resistant Protective Ctg.Epoxy Novolac (1 or 2 coats)

Specialty Products, Inc. (SPI)Polyshield HT, Polyshield Hi-E, Polyshield HT-100F UPolyurea Pure (1, 2, or 3 coats)

Stirling Lloyd Group Plc.PermareOther

Stirling Lloyd Products, Inc.PermareOther





Thin Film Technology, Inc.Bio-Gard, Bio-DurEpoxy 100% Solids (1 or 2 coats)


U.S. Coatings, LLCEpoxyGripEpoxy/Epoxy/Epoxy



Wilko Paint, Inc.WilkoEpoxy Coal Tar/Epoxy Coal Tar


Cargo Tank LiningsSteel


Altex Coatings Ltd.CarbolineEpoxy/Epoxy Novolac/Epoxy Novolac

AmTech Tank Lining & Tank RepairDuraChem 580Polyurea Hybrid (1, 2, or 3 coats)

ARC Composites, Div. of A.W. ChestertonARC S4+ / 982Epoxy Novolac (1 or 2 coats)

Arma CoatingsArma 901 55Polyurea Pure (1, 2, or 3 coats)

Carboline CompanyCarboguardEpoxy 100% Solids (1 or 2 coats)


Cloverdale Paint, Inc.ClovaLineEpoxy 100% Solids (1 or 2 coats)

Corporacion Mara SASigma CoatingsEpoxy/Epoxy Novolac/Epoxy Novolac

Corrocoat USA, Inc.CorroglassVinyl Ester/Vinyl Ester/Vinyl Ester




Duromar, Inc.HPL-2510/HPL-2510Epoxy (1-2 coats)/Urethane



ErgonArmor NovocoatNovocoat SP2000Epoxy/Epoxy 100% Solids

Fabick Protective CoatingsFabickPolyurea Pure (1, 2, or 3 coats)


Gemite Products, Inc.Gem-Cote EP CREpoxy 100% Solids (1 or 2 coats)




Hempel (USA) Inc.15500/15500/15500Epoxy/Epoxy/Epoxy


Highland International, Inc.74 Series Hybrid Epoxy NovolacEpoxy Novolac (1 or 2 coats)


HydraTech Engineered ProductsWaterline 8001Epoxy/Epoxy 100% Solids


Marine Industry

12


13

Induron Coatings, Inc.PermaClean 100 Ceramic EpoxyEpoxy 100% Solids (1 or 2 coats)


Jotun Paints, Inc.Tankguard SeriesEpoxy/Epoxy Phenolic/Epoxy Phenolic

KCC Corrosion Control Co., Ltd.Techni-Plus AEP 20.2Epoxy/Epoxy Flake Filled/Epoxy Flake Filled


Madison Chemical IndustriesMariThane II MultiPolyurea Hybrid (1, 2, or 3 coats)


Nukote Coating Systems Canada, Inc.NukotePolyurea Hybrid (1, 2, or 3 coats)

Nukote Coating Systems InternationalNukote CGPolyurea Hybrid (1, 2, or 3 coats)




Polycorp Ltd.Polycorp/PolymericSheet Lining, Rubber

Polyval CoatingsPolyflexPolyurea Pure (1, 2, or 3 coats)


PPG Protective & Marine CoatingsAT253/AT253Epoxy Novolac (1 or 2 coats)

Rhino Linings CorporationRhino Linings TuffGripPolyurea Pure (1, 2, or 3 coats)

Rodda Paint Co./Cloverdale PaintClovaLineEpoxy Novolac (1 or 2 coats)




Seacoat TechnologyNova-Sil CHOrganic Zinc/Epoxy/Siloxane


Sherwin-WilliamsPhenicon HSEpoxy Phenolic/Epoxy Phenolic/Epoxy Phenolic

Specialty Products, Inc. (SPI)Ultra Bond-100, Polyshield Hi-E, Polyshield HT-100FPolyurea Pure (1, 2, or 3 coats)





U.S. Coatings, LLCGripLineEpoxy/Epoxy 100% solids



Wilko Paint, Inc.WilkoPolyester/Polyester/Polyester

Wolverine Coatings CorporationChemShieldEpoxy Novolac (1 or 2 coats)

Cargo Hold LiningsSteel



AmTech Tank Lining & Tank RepairDuraChem 580Polyurea Hybrid (1, 2, or 3 coats)

ARC Composites, Div. of A.W. ChestertonARC S7Vinyl Ester/Vinyl Ester/Vinyl Ester

Arma CoatingsArma 901 90ASPolyurea Pure (1, 2, or 3 coats)

Carboline CompanyCarboguardEpoxy/Epoxy/Epoxy

Chemco International Ltd.RS 500P & RA 500MEpoxy/Epoxy 100% solids

Cloverdale Paint, Inc.ClovaLineEpoxy Novolac (1 or 2 coats)

Corporacion Mara SASigma CoatingsEpoxy/Epoxy Novolac/Epoxy Novolac

Corrocoat USA, Inc.CorroglassVinyl Ester/Vinyl Ester/Vinyl Ester

Corroseal / Rodda Paint Co.Corroseal Rust Converter PrimerPhenolic/Fusion-Bonded Epoxy



Diamond Vogel Paint CompanyMult-E-Prime 500/Mult-E-Poxy 180Epoxy/Epoxy/Epoxy


Duromar, Inc.HPL-1110 / HPL-1110Epoxy 100% Solids (1 or 2 coats)



ErgonArmor NovocoatNovocoat SP2000Epoxy Novolac (1 or 2 coats)

Fabick Protective CoatingsFabickPolyurea Pure (1, 2, or 3 coats)






Hempel (USA) Inc.45751-3/45751-3/45751-3Epoxy/Epoxy/Epoxy


Highland International, Inc.74 Series Hybrid Epoxy NovolacEpoxy Novolac (1 or 2 coats)






Induron Coatings, Inc.PermaClean 100 Ceramic EpoxyEpoxy 100% Solids (1 or 2 coats)



Jotun Paints, Inc.Jotaguard 630/660/690Epoxy/Epoxy/Epoxy

KCC Corrosion Control Co., Ltd.Techni-Plus AEP 20.2Epoxy/Epoxy Flake Filled/Epoxy Flake Filled


Madison Chemical IndustriesMariThane II MultiPolyurea Hybrid (1, 2, or 3 coats)


Northern Industries, Inc.NI-56Urethane/Urethane


Nukote Coating Systems Canada, Inc.NukotePolyurea Hybrid (1, 2, or 3 coats)

Nukote Coating Systems InternationalNukote CGPolyurea Hybrid (1, 2, or 3 coats)




Polycorp Ltd.Polycorp/PolymericSheet Lining, Rubber

Polyval CoatingsPolyflexPolyurea Hybrid (1, 2, or 3 coats)


PPG Protective & Marine CoatingsAT238/AT238Epoxy/Epoxy/Siloxane

Rhino Linings CorporationRhino Linings TuffGrip_Polyurea Pure (1, 2, or 3 coats)

Rodda Paint Co./Cloverdale PaintClovaprime 21/Clovacoat 300Epoxy/Epoxy/Epoxy



Seacoat TechnologyNova-SilEpoxy/Epoxy/Siloxane


Sherwin-WilliamsEuroNavy ES301Epoxy/Epoxy 100% solids

Specialty Products, Inc. (SPI)HCR-FR, Ultra Bond-100, AMP 100Polyurea Pure (1, 2, or 3 coats)


Termarust TechnologiesTermazinc TZ1000 SeriesZinc-Rich, Oganic



U.S. Coatings, LLCEpoxyGripEpoxy/Epoxy/Epoxy


Wilko Paint, Inc.WilkoEpoxy (1-2 coats)/Urethane

Wolverine Coatings CorporationChemShieldEpoxy Novolac (1 or 2 coats)

ZRC WorldwideZRC Zero-VOC Galvanizing CompoundZinc-Rich, Inorganic

SPONSORED BY Marine Industry

14


Advanced Chemical Technologies, Inc.9608 North Robinson Ave.Oklahoma City, OK 73114Phone: 800-535-0433Contact: Kevin [email protected]

Advanced Science CoatingsPO Box 748Sunset Beach, CA 90742Phone: 209-481-2042Contact: Tom [email protected]

AFM3251 Third AvenueSan Diego, CA 92103Phone: 619-239-0321Contact: Jay [email protected]

Albi Mfg., Div. of StanChem, Inc.401 Berlin StreetEast Berlin, CT 6023Phone: 860-828-0571Contact: Ted [email protected]

Aldo Products Company, Inc.1604 N. Main St.Kannapolis, NC 28081Phone: 800-474-6019Contact: Robert [email protected]

Alistagen CorporationTen Park AvenueNew York, NY 10016Phone: 212-317-0100Contact: Alis [email protected]

Allnex9005 Westside ParkwayAlpharetta, GA 30009Phone: [email protected]

Altex Coatings Ltd.PO Box 142Tauranga, 3140 New ZealandPhone: 0064-7-541-1221Contact: Ricky [email protected]

American Industrial1218 W. 41st St., Ste. BTulsa, OK 74107Phone: 918-445-0627Contact: Fred [email protected]

AmTech Tank Lining & Tank Repair75-4 Main St., Ste. 300Plymouth, NH 03264Phone: 888-839-0373Contact: Dennis [email protected]

Andek Corporation850 Glen Ave.Moorestown, NJ 08057Phone: 800-800-2844Contact: Neil [email protected]

ARC Composites, Div. of A.W. Chesterton860 Salem St., Bldg. AGroveland, MA 01834Phone: 978-469-6666Contact: Kathy [email protected]

Aremco ProductsPO Box 517Valley Cottage, NY 10989Phone: 845-268-0039Contact: Peter [email protected]

Arizona Polymer Flooring, Inc.7731 N. 68th AvenueGlendale, AZ 85303Phone: 888-855-3455Contact: Daniel [email protected]

Arkema, Inc.900 First Ave., Bldg. 10King of Prussia, PA 19406Phone: 610-205-7898Contact: Vince [email protected]

Arma Coatings5555 W. 11th Ave.Eugene, OR 97402Phone: 800-524-2762Contact: Charles [email protected]

Armor Shield1343 Union Avenue, NE Grand Rapids, MI 49505Phone: 616-245-0757Contact: Patrick [email protected]

Associated Paint10160 NW South River Dr.Miami, FL 33178Phone: 305-885-1964Contact: Lee [email protected]

AAashish Coating Tech Pvt. Ltd.140 Laxmi Plaza, New Link Rd., Andheri W.Mumbai, 400053 IndiaContact: Jayant PatelPhone: [email protected]

ABRI Industries8055 W. Manchester Ave., Ste. 735Playa Del Rey, CA 90293Phone: 310-341-3600Contact: Lee [email protected]

Acry-Tech Coatings Inc.3601 NE 5th Ave.Ft. Lauderdale, FL 33334Phone: 954-565-6001Contact:Miki [email protected]

AcryliCon Flooring Solutions12460 Crabapple Rd., Ste. 202-106Alpharetta, GA 30004Phone: 888-736-7550Contact: Jason [email protected]

Acrylux Paint Co.6010 Powerline Rd.Ft. Lauderdale, FL 33309Phone: 954-772-0300Contact: Andrew [email protected]

Acrymax Technologies, Inc.221 Brooke St.Media, PA 19063Phone: 800-553-0523Contact: Eric [email protected]

Coating Company Profiles

15


16

ASTC Polymers Inc.3207 West Warner Ave.Santa Ana, CA 92704Phone: 714-966-2893Contact: Dick [email protected]

Atlantic Metal Coatings25 Dundee AvenueMt. Pearl, NF A1N 4R6 CanadaPhone: 709-364-7262Contact: Roy [email protected]

Atlas Minerals & Chemicals, Inc.1227 Valley Rd.Mertztown, PA 19539Phone: 610-682-7171Contact: Scott [email protected]

Avid Protective Products Ltd.2085 Laurelwood Dr.Oakville, ON L6H 4S8 CanadaPhone: 905-339-8386Contact: David [email protected]

Avilion Inc.3947 Lincoln HighwayDowningtown, PA 19335Phone: 610-942-7388Contact:Michelle [email protected]

Axalta Coating Systems North America9800 Genard Rd.Houston, TX 77041Phone: [email protected]

BBASF Corporation-Construction Systems889 Valley Park Dr.Shakopee, MN 55379Phone: [email protected]

Bechtel Industrial Coating Supply21424 SE 16th PlaceSammamish, WA 98075Phone: 425-392-1876Contact: Robert [email protected]

Benjamin Moore & Co.101 Paragon DriveMontvale, NJ 07645Phone: [email protected]

Blendex Industrial Corp.135 Bangor StreetLindenhurst, NY 11757Phone: 888-376-9935Contact: John [email protected]

Blome InternationalPart of the HEMPEL Group1450 Hoff Industrial Dr.O'Fallon, MO 63366Phone: 636-379-9119Contact:Marsha [email protected]

Blue River Coatings2910 South Nebraska Ave.Hastings, NE 68901Phone: 888-420-2628Contact: Phil [email protected]

Blue Water Marine Paint1999 Elizabeth St.North Brunswick, NJ 08902Phone: 908-967-9867Contact: Paul [email protected]

Bowers Industrial3645 W. 1987 SouthSalt Lake City, UT 84104Phone: 800-892-5224Contact: Kevin [email protected]

Bradley Coatings Group2873 West Hardies Rd.Gibsonia, PA 15044Phone: 724-444-4400Contact: Phil [email protected]

Burke Industrial Coatings600 South 74th Pl., Ste. 108Ridgefield, WA 98642Phone: 800-348-3245Contact: Jim Harrisjpharris@burkeindustrialcoatings.comburkeindustrialcoatings.com

CCantex Coatings Ltd.2390 Industrial St.Burlington, ON M7P 1A5 CanadaPhone: 905-319-8972Contact: Jerry Van [email protected]

CANUSA-CPS25 Bethridge Rd.Toronto, ON M9W 1M7 CanadaPhone: 416-744-5798Contact: Bob [email protected]

Capitol Paint Manufacturing Corp.722 SW 23rd St.Oklahoma City, OK 73109Phone: 405-634-3383Contact: Stan [email protected]

Carboline Company2150 Schuetz Rd.St. Louis, MO 63146Phone: [email protected] our display ad, inside front cover.

CCI Con-Tech of California, Inc.2211 Navy Dr.Stockton, CA 95206Phone: 209-941-8324Contact: Steven A. [email protected]

Ceilcote (International Paint LLC)6001 Antoine Dr.Houston, TX 77091Phone: 800-589-1267pcmarketing.americas@akzonobel.cominternational-pc.com

Celufibre Industries Inc.14735 124th Ave.Edmonton, AB T5L 3B2 CanadaPhone: 780-447-1255Contact: Kevin [email protected]

Ceram-Kote Coatings Inc.1800 Industrial DriveBig Spring, TX 79720Phone: 432-263-8497Contact: Kevin [email protected]

Chemco International Ltd.East Shawhead Industrial EstateCoatbridge, ML5 4XD U.K.Phone: 44-1236 606060Contact:Manny [email protected]

ChemCo Systems2800 Bay Rd.Redwood City, CA 94063Phone: 800-757-6773Contact: John [email protected]

Chemcoat, Inc.2790 Canfields Ln.Montoursville, PA 17754Phone: 800-326-9471Contact: Art [email protected]

Chemical Products Industries7649 SW 34th StreetOklahoma City, OK 73179Phone: 405-745-2070Contact: Jordan [email protected]

Chemline5151 Natural Bridge Rd.St. Louis, MO 63115Phone: 314-664-2230Contact: Steve [email protected]

ChemMasters, Inc.300 Edwards StreetMadison, OH 44057Phone: 440-428-2105Contact: Rich [email protected]

CIM Industries23 Elm St.Peterborough, NH 03458Phone: 603-924-9481Contact: Becky [email protected]

Cloverdale Paint Inc.6950 King George Blvd.Surrey, BC V3W 4Z1 CanadaPhone: 403-236-4777Contact: Trevor [email protected]

CMP/Chugoku1610 Engineers Rd.Belle Chasse, LA 70037Phone: 504-392-4817Contact: Nancy [email protected]

Coating Systems & Supply, LLC11479 Darryl Dr.Baton Rouge, LA 70815Phone: 225-272-6385Contact:Michael R. [email protected]

Coatings For Industry, Inc.319 Township Line Rd.Souderton, PA 18964Phone: 877-723-0919Contact: Kevin Klotzcficoatings.com

Company Profiles


17

Corrocoat LimitedForster St.Leeds, West Yorkshire, LS10 1PW U.K.Phone: 44-113-2760760Contact: Graham Greenwoodcorrocoat.com

Corrocoat USA Inc.6525 Greenland RoadJacksonville, FL 32258Phone: 904-268-4559Contact: Josh [email protected]

Corroseal/Rodda Paint Co.6107 N. Marine DrivePortland, OR 97203Phone: 800-237-1573Contact: Sue [email protected]

Corrotherm Protective Coatings, Inc.175 Philmont Ave.Feasterville, PA 19053Phone: 215-322-5255Contact: Donald [email protected]

Cortec Corporation4119 White Bear ParkwaySt. Paul, MN 55110Phone: 651-429-1100Contact: Cliff [email protected]

Cote-L Industries Inc.1542 Jefferson St.Teaneck, NJ 7666Phone: 201-836-0733Contact: Cy [email protected]

CRC-Evans7011 High Life Dr.Houston, TX 77066Phone: 832-249-3100Contact: Kevin [email protected]

Creto Worldwide125 East Reno Ave. Suite 1Las Vegas, NV 89119Phone: 702-372-6274Contact: John [email protected]

Crossfield Products Corp.3000 E. Harcourt StreetRancho Dominguez, CA 90221Phone: 310-886-9100Contact: Jodi [email protected]

CSL Silicones, Inc.144 Woodlawn Road WestGuelph, ON N1H 1B5 CanadaPhone: 519-836-9044Contact: Patrick [email protected]

DDampney Co., Inc.85 Paris StreetEverett, MA 02149Phone: 617-389-2805Contact: Dennis [email protected]

Daubert Chemical Co.4700 S. Central Ave.Chicago, IL 60638Phone: 708-563-8302Contact: Frank [email protected]

Daubert Cromwell12701 S. Ridgeway Ave.Alsip, IL 60803Phone: 708-293-7750Contact: Jamie [email protected]

Davis Paint Company1311 Iron StreetKansas City, KS 64116Phone: 800-821-2029Contact: Cindy [email protected]

Denso North America9747 Whithorn DriveHouston, TX 77095Phone: 281-821-3355Contact: Jesse [email protected] our display ad, p. 117.

Dependable, LLCPO Box 16307Rocky River, OH 44116Phone: 717-951-0494Contact: Joe [email protected]

Devoe High Performance Coatings (International Paint LLC)6001 Antoine Dr.Houston, TX 77091Phone: 800-589-1267pcmarketing.americas@akzonobel.cominternational-pc.comSee our display ad, p. 56.

Comex Group5575 DTC ParkwayGreenwood Village, CO 80111Phone: [email protected]

Composite Technologies2010 Scott Ave.Calberton, NY 11933Phone: 631-680-0662Contact: Gerald [email protected]

Concrete Coatings, Inc.1105 N. 1600 W.Layton, UT 84041Phone: 801-544-8771Contact: Cory [email protected]

Concrete Sealants9325 State Rte. 201Tipp City, OH 45371Phone: [email protected]

Concrete SolutionsProducts by Rhino Linings9151 Rehco Rd.San Diego, CA 92121Phone: 800-422-2603Contact: Bart [email protected]

Conklin Company, Inc.3951 NE Kimball DriveKansas City, MO 64161Phone: 800-888-8838conklin.com

ConShield Technologies541 10th Street #233Atlanta, GA 30318Phone: 877-543-2094Contact: Joe [email protected]

Construction Specialties Group, Inc.15783 Crocus LaneDumfries, VA 22025Phone: 703-670-5300Contact: Neil [email protected]

Construction Systems SupplyPO Box 3894Seattle, WA 98124Phone: 888-432-6807Contact: Ron [email protected]

Contego International, Inc.334 Greyhound Pass WestCarmel, IN 46032Phone: 800-434-6444Contact: Tony [email protected]

Contract Coatings Corporation706 E. Main St.Stockton, CA 95202Phone: 209-465-2634Contact: Arlen [email protected]

Convenience Products/Seal-Krete306 Gandy Rd.Auburndale, FL 33823Phone: 800-323-7357Contact: David [email protected]

Cooley Group50 Esten Ave.Pawtucket, RI 02860Phone: 401-721-6216Contact:Michelle [email protected]

Copps Industries, Inc.10600 N. Industrial Dr.Mequon, WI 53092Phone: 800-672-2622Contact: Jeff [email protected]

Corolon Coatings & Corrosion Control Tech. Inc.2 Haas Rd.Toronto, ON M9W 3A2 CanadaPhone: 416-401-8855Contact: Stan E. [email protected]

Coronado Paint308 Old County RoadEdgewater, FL 32132Phone: 386-428-6461Contact: Richard Lutzcoronadopaint.com

Corotech High Performance Coatings101 Paragon DriveMontvale, NJ 07645Phone: 201-949-6216Contact: Jeffrey T. [email protected]

Corporacion Mara SAJr. Pereseo 251Chorrillos, 9 PeruPhone: 51-12013535Contact: Fredy [email protected]

Company Profiles


18

Company Profiles

Diamond Liners, Inc.9507 Santa Fe Springs Rd.Santa Fe Springs, CA 90670Phone: 562-781-1045Contact: John [email protected]

Diamond Vogel Paint Company1110 Albany Place SEOrange City, IA 51041Phone: 712-737-8880Contact: Perry [email protected]

Dinoflex Group LP5590 46th Ave.Salmon Arm, BC V1E 4S1 CanadaPhone: 780-619-8568Contact: Chad [email protected]

The Dow Chemical Company9008 BuildingMidland, MI 48642Phone: 800-447-4369Contact: Dave Petersondow.com

Dudick, Inc.1818 Miller ParkwayStreetsboro, OH 44241Phone: 330-562-1970Contact: Barb [email protected]

Dunn-Edwards4885 E. 52nd PlaceLos Angeles, CA 90058Phone: [email protected]

Duraamen Engineered Products Inc.116 West 23rd StreetNew York, NY 10011Phone: 212-386-7609Contact: Victor [email protected]

Duromar, Inc.706 Washington StreetPembroke, MA 02359Phone: 781-826-2525Contact: Daniel [email protected]

Dynafloor Systems553 Highland Rd. E.Macedonia, OH 44056Phone: 800-453-6366Contact: Jerry [email protected]

Dynamic Coatings, Inc. (DCI)5629 East Westover Ave., Suite AFresno, CA 93727Phone: 877-225-2549Contact: David [email protected]

EEA Wilcox173 Utah Ave.South San Francisco, CA 94080Phone: 650-871-5350Contact: John [email protected]

Elastomer Specialties, Inc.10848 South 265thBroken Arrow, OK 74014Phone: 918-486-4244Contact: Neil [email protected]

Endura Manufacturing Ltd.12425 149th St.Edmonton, AB T5L 2J6 CanadaPhone: 780-451-4242Contact: Elissa [email protected]

ENECON Corporation6 Platinum CourtMedford, NY 11763Phone: 516-349-0022Contact:Mike [email protected]

Enviro Epoxy Products90 Nolan Court #2Markham, ON L3R 4L9 CanadaPhone: 905-305-8551Contact: Terry [email protected]

Enviroline (International Paint LLC)6001 Antoine Dr.Houston, TX 77091Phone: 800-589-1267pcmarketing.americas@akzonobel.cominternational-pc.com

Environmental Protective Coatings Inc.2035 Regency Rd., Ste. 5Lexington, KY 40503Phone: 859-277-0014Contact: Homer O. [email protected]

Envirotrol, Inc.2594 Flat Shoals Rd.Conyers, GA 30013Phone: 770-922-4737Contact: Pat [email protected]

Fire Free Coatings, Inc.580 Irwin Street Suite 1San Rafael, CA 94901Phone: 415-459-6488Contact: Elisa [email protected]

Flame Control Coatings, LLC4120 Hyde Park Blvd.Niagara Falls, NY 14305Phone: 716-282-1399Contact: Tim [email protected]

Floor Seal Technology, Inc.1005 Ames Ave.Milpitas, CA 95035Phone: 408-590-4849Contact: Bill [email protected]

FLOROCK, Crawford Labs, Inc.4165 S. Emerald Ave.Chicago, IL 60609Phone: [email protected]

FSC Coatings, Inc.5360 Eastgate Mall Rd., Ste. FSan Diego, CA 92121Phone: 800-579-8459Contact: Steve [email protected]

GG.O.A. Enterprises - Agent for Chemco International Ltd.1700 Post Oak Blvd., 2 Blvd. Pl., Ste. 600Houston, TX 77056Phone: 281-712-7035Contact: S.L. (Sindee) [email protected]

G3 Tapes11639 Riverside Drive, Suite 103Lakeside, CA 92040Phone: 619-448-4439Contact:Meghan [email protected]

Gaco Western200 West Mercer St. Suite 202Seattle, WA 98119Phone: [email protected]

Eoncoat, LLC1704 Park Central Blvd. NorthPompano Beach, FL 33064Phone: 754-222-4919Contact: Jim [email protected]

EPDM Coatings494 Bridgeport Ave., Ste. 101-342Shelton, CT 06484Phone: 610-298-1989Contact: Kelly [email protected]

EPIC Supply, LLCPO Box 5Bowmansville, NY 14026Phone: 716-565-5450Contact: Carl R. [email protected]

ErgonArmor NovocoatPO Box 23028Flowood, MS 39225Phone: [email protected]

Euclid Chemical Company19218 Redwood RoadCleveland, OH 44110Phone: [email protected]

Evonik Industries299 Jefferson Rd.Parsippany, NJ 07054Phone: 973-929-8513Contact: Anil [email protected]

FFabick Protective Coatings4118 Robertson RoadMadison, WI 53714Phone: 608-242-1100Contact: Steven [email protected]

Farrell-Calhoun Paint221 East CarolinaMemphis, TN 38126Phone: 901-526-2211Contact: Craig [email protected]

Farwest Corrosion Control Company12029 Regentview Ave.Downey, CA 90241Phone: 310-532-9314Contact:Marnie [email protected]


19

Gelest, Inc.11 E. Steel RoadMorrisville, PA 19067Phone: 215-547-1015Contact: Gabrielle [email protected]

Gemite Products, Inc.1787 Drew Rd.Mississauga, ON L5S 1J5 CanadaPhone: 888-443-6483Contact: Igor [email protected]

Georg Fischer Central Plastics39605 IndependenceShawnee, OK 74804Phone: 800-654-3872Contact:Mark [email protected]

Gill Industries, Inc.3462 Kershaw Camden Hwy.Lancaster, SC 29720Phone: 803-285-4831Contact: G. Shane [email protected]

Glidden Professional15885 W. Sprague RoadStrongsville, OH 44136Phone: 800-984-5444Contact: [email protected]

Global EcoTechnologiesPO Box 2205Antioch, CA 94531Phone: 925-754-4100Contact: Scott [email protected]

Global Industrial Coatings11130 Twitty Dr.Rolla, MO 65401Phone: 573-364-2722Contact: George [email protected]

Goodwest Linings and Coatings8814 Industrial Ln.Rancho Cucamonga, CA 91730Phone: 951-236-7576Contact: Patrick [email protected]

Grace Distributing232 Molasses LaneMount Pleasant, SC 29464Phone: 434-825-1529Contact: John [email protected]

Groco Specialty Coatings10818 C.F. Hawn FreewayDallas, TX 75217Phone: 972-286-7890Contact: Bob [email protected]

Gulf Coast Paint Mfg., Inc.30075 County Road 49Loxley, AL 36551Phone: 251-964-7911Contact: John R. [email protected]

HHadek Protective SystemsFoster Plaza 5, 651 Holiday DrivePittsburgh, PA 15220Phone: 412-204-0028Contact: Benjamin Beckhadek.com

hci chemtech, inc.310 S. Bellis St.Wausau, WI 54403Phone: 800-596-6282Contact: Cheryl [email protected]

HDIM Protective Coatings14538 121A Ave.Edmonton, AB T5L 4L2 CanadaPhone: 780-482-4346Contact: Norm [email protected]

Hempel (USA) Inc.600 Conroe Park North DriveConroe, TX 77303Phone: 936-523-6000Contact:Marsha [email protected]

Heresite Protective Coatings, LLC822 South 14th St.Manitowoc, WI 54220Phone: 920-684-6646Contact: Jim [email protected]

Hi-Tech Concrete Coatings, Inc.430 Oak LaneLititz, PA 17543Phone: 717-664-4006Contact: Brian A. [email protected]

Highland International, Inc.465 Industrial Park Dr.Boone, NC 28607Phone: 828-265-2513Contact: Katie Dudakduda@highland-international.comhighland-international.comSee our display ad, p. 63.

HJ3 Composite Technologies2440 West Majestic ParkwayTucson, AZ 85705Phone: 520-322-0010Contact: John [email protected]

HydraTech Engineered Products10448 Chester RoadCincinnati, OH 45215Phone: 513-827-9169Contact: Peter Blais/Michael [email protected]

Hydrex Underwater Technology604 Druid Road E.Clearwater, FL 33756Phone: 727-443-3900Contact: John [email protected]

Hyperseal34-801 Spyder CirclePalm Desert, CA 92211Phone: 760-324-7900Contact: Brian [email protected]

Hy-Tech Thermal Solutions159 Park Hill Blvd.West Melbourne, FL 32904Phone: [email protected]

IIndMar Coatings Corporation317 W. Main St. Wakefield, VA 23888Phone: 757-899-3807Contact:Wilmer [email protected]

Induron Coatings, Inc.3333 R. Arrington Jr. Blvd. N.Birmingham, AL 35234Phone: [email protected]

Industrial Coatings & Sealants12521 Evergreen Dr., Ste. BMukilteo, WA 98275Phone: 425-742-5693Contact: Greg [email protected]

Industrial Maintenance Group, Inc.1904 Industrial Park DrivePlant City, FL 33566Phone: 813-659-3512Contact: Pete Van Fossenpete@industrialmaintenancegroup.comindustrialmaintenancegroup.com

Industrial Nanotech, Inc.1925 Trade Center Way Ste. 1Naples, FL 34109Phone: 800-767-3998Contact: Francesca [email protected]

Inliner Technologies1468 West Hospital RoadPaoli, IN 47454Phone: 812-723-0704Contact: Geoff [email protected]

Innovative Coatings1685 Rossi DriveWindsor, ON N9A 6J3 CanadaPhone: 519-737-9046Contact:Wayne [email protected]

Insulating Coatings Corporation27 Link Dr. Suite DBinghamton, NY 13904Phone: 800-223-8494Contact: Rick [email protected]

Integrated Protective Coatings Inc.7036 50th St.Edmonton, AB T6B 2J8 CanadaPhone: 780-456-3467Contact: Andrew [email protected]

Intercoastal Paint Co.14029 W. Hardy Rd.Houston, TX 77060Phone: 281-448-5258Contact: Heidi [email protected]

International Cellulose Corporation12315 Robin Blvd.Houston, TX 77045Phone: 800-444-1252Contact: Chuck Smith/Joey [email protected]

International Chem-Crete Corp.800 Security RowRichardson, TX 75081Phone: 972-671-6477Contact: Jay [email protected]

Company Profiles


20

LuminOre6060 Corte del CedroCarlsbad, CA 93011Phone: 760-431-7705Contact: Jenny [email protected]

MMad Dog Primer309 Plum Street N.Northfield, MN 55057Phone: 507-645-7431Contact: Doug [email protected]

Madewell Products Corporation7561-A Industrial CourtAlpharetta, GA 30004Phone: 770-475-8199Contact: Steve [email protected]

Madison Chemical Industries490 McGeachie Dr.Milton, ON L9T 3Y5 CanadaPhone: 905-878-8863Contact: Kim [email protected]

Mascoat4310 Campbell RoadHouston, TX 77041Phone: 713-465-0304Contact: Chad [email protected]

Micor Company, Inc.3232 N. 31st StreetMilwaukee, WI 53216Phone: 800-284-4308Contact: Bill [email protected]

Midsun Group, Inc.135 Redstone StreetSouthington, CT 06480Phone: 860-378-0100Contact: Andy [email protected]

Milamar Coatings, LLC311 NW 122nd St. Ste. 100Oklahoma City, OK 73114Phone: 405-755-9956Contact: Duane [email protected]

International Flooring & Protective Coatings, Inc.4675 E. Princess Anne Rd.Norfolk, VA 23502Phone: 757-855-5286Contact: Steve Solomonssolomon@internationalflooring.cominternationalflooring.com

International Metal Fusion Corporation900 NW 10th Ave.Fort Lauderdale, FL 33311Phone: 609-670-2200Contact: Carl [email protected]

International Paint, LLC6001 Antoine Dr.Houston, TX 77091Phone: 800-589-1267pcmarketing.americas@akzonobel.cominternational-pc.comSee our display ad, p. 56.

International Polyurethane Systems5590 46th Ave. SESalmon Arm, BC V1E 4S1 CanadaPhone: 780-619-8568Contact: Chad [email protected]

Interpaints SACAv. Enrique Meiggs 2925Lima, 1 PeruPhone: 51 1 4520070Contact:Miguel [email protected]

IPA Systems, Inc.2745 N. Amber StreetPhiladelphia, PA 19134Phone: 215-425-6607Contact: John [email protected]

IPS Polymers Systems8530 Milliken Ave.Rancho Cucamonga, CA 91730Phone: 909-941-4999Contact: Amy [email protected]

Isolatek International41 Furnace StreetStanhope, NJ 07874Phone: 973-347-1200Contact: Sean [email protected]

ITW Polymers Coatings North America130 Commerce DriveMontgomeryville, PA 18936Phone: [email protected]

Company Profiles

JJamestown Coating Technologies108 Main St.Jamestown, PA 16134Phone: 724-932-3101Contact:Michael [email protected]

Johnson Industrial Coatings10436 N. NC Hwy. 150Clemmons, NC 27012Phone: 336-764-1648Contact: Jay [email protected]

Jotun Paints, Inc.842 W. Sam Houston Pkwy. N.,City Center Three, Ste. 300Houston, TX 77024Phone: [email protected] our display ad, p. 76.

KKaufman Products, Inc.3811 Curtis AvenueBaltimore, MD 21226Phone: 800-637-6372Contact: Alex [email protected]

KCC Corrosion Control Co., Ltd.4018 Trey Dr.Houston, TX 77084Phone: 281-550-1199Contact: Owen T. [email protected]

Kelly-Moore Paint Company987 Commercial StreetSan Carlos, CA 94070Phone: 800-874-4436Contact: Rusty [email protected]

KEMA Coatings LImitedUnit 904 - 60 Wyndham St. SouthGuelph, ON N1E 7H7 CanadaPhone: 519-826-9374Contact:Mark [email protected]

Kemper System America, Inc.1 Reuten DriveCloster, NJ 07624Phone: 800-541-5455Contact: James [email protected]

Key Resin Company4050 Clough Woods Dr.Batavia, OH 45103Phone: 888-943-4532Contact: Eric [email protected]

Klaas Coatings (North America) LLCPO Box 25122Dallas, TX 75225Phone: 866-317-3633Contact: Richard Taylorinfo@klaascoatings-northamerica.comklaascoatings-northamerica.com

KOPAK IndustriesC-49 KDA Scheme 1 Karasz KHI Karachi, 75350 PakistanPhone: 92-321-8950091Contact: Raza [email protected]

KOSTER American Corp.2585 Aviator DriveVirginia Beach, VA 23453Phone: 757-425-1206Contact: Ray [email protected]

Kryton International Inc.1645 East Kent Ave.Vancouver, BC V5P 2S8 CanadaPhone: 604-324-8280Contact: Rodney [email protected]

LLinabond1161 Avenida AcasoCamarillo, CA 93012Phone: 805-484-7373Contact: Georgia [email protected]

Liquid Metal Coatings, LLC7015 W. 16th Ave.Lakewood, CO 80215Phone: 303-202-2042Contact: Bob Scheckliquidmetalcoatings.com

Lone Star Specialties, LLC6412 US Hwy. 259 SouthLone Star, TX 75668Phone: 903-656-2536Contact: Tony Thigpenlonestarspecialties.net

Lonza1200 Bluegrass Lakes ParkwayAlpharetta, GA 30004Phone: [email protected]


21

Polycoat Products14722 Spring Ave.Santa Fe Springs, CA 90670Phone: 562-802-8834Contact: Joe [email protected]

Polycorp Ltd.33 York StreetElora, ON N0B 1S0 CanadaPhone: 519-846-2075Contact: Dennis [email protected]

Polyguard Products, Inc.PO Box 755Ennis, TX 75120Phone: 281-580-5700Contact: Chic [email protected]

Polymax/Milamar Coatings LLC311 NW 122nd St., Ste. 100Oklahoma City, OK 73114Phone: 405-755-8454Contact: Joanne [email protected]

Polytech Industrial Coatings, Inc.PO Box 12407Fresno, CA 93777Phone: 800-507-2953Contact: Andrew McLaughlinandrew@polytechindustrialcoatings.compolytechindustrialcoatings.com

Polyval Coatings520 Boul Cure BoivinBoisbriand, QC H3S 2N6 CanadaPhone: 800-465-0905Contact:Marc [email protected]

PPC Coatings (MTR)2 Pixie RoadWilmington, DE 19810Phone: 877-588-2227Contact: Cliff [email protected]

PPG Hi-Temp CoatingsOne PPG PlacePittsburgh, PA 15272Phone: 978-635-1110Contact: Ronald [email protected]

PPG Protective & Marine CoatingsOne PPG PlacePittsburgh, PA 15272Phone: 888-897-7476Contact: Steve [email protected] our display ad, p. 111.

Paragon Fusionclad809 77th Ave.Edmonton, AB T6P 1S9 CanadaPhone: 780-461-7719Contact: Dean [email protected]

Pecora165 Wambold Rd.Harleysville, PA 19438Phone: 215-799-7530Contact: Alicia [email protected]

Peerless Industrial SystemsPO Box 2041Hampton East, 3189 AustraliaPhone: 61 408 949 368Contact: Nick [email protected]

Pilgrim Permocoat402 South 22nd St.Tampa, FL 33605Phone: 800-637-3328Contact: Robert [email protected]

Plastocor, Inc.100 Research RoadHingham, MA 02043Phone: 724-942-0582Contact: Jim [email protected]

The Platt Brothers & CompanyPO Box 1030Waterbury, CT 06721Phone: 203-753-4194Contact: David [email protected]

Plexi-Chemie, Inc.606 Lane Ave. North Ste. 6Jacksonville, FL 32043Phone: 904-693-8800Contact: Elizabeth [email protected]

Polar IndustriesPO Box 293Fisher Branch, MB R0C 0Z0 CanadaPhone: 786-955-4008Contact: Lillian [email protected]

Polibrid Coatings, Inc.6700 F.M. 802Brownsville, TX 78526Phone: 956-831-7818Contact: Klaus D. [email protected]

Monopole, Inc.4661 Alger St.Los Angeles, CA 90039Phone: 818-500-8585Contact: Lawrence [email protected]

NNanochem Technologies1203 Kent StreetElkhart, IN 46514Phone: 574-970-2436Contact: Richard J. [email protected]

National Liner, LLC375 Williamstowne, Suite 102Delafield, WI 53018Phone: 800-547-1235Contact: Scott Roth

National Polymers Inc.9 Guttman Ave.Charleroi, PA 15022Phone: 724-483-9300Contact: Erica [email protected]

Nationwide Protective Coating Mfrs., Inc.7106 24th Court EastSarasota, FL 34243Phone: [email protected]

Neogard2728 Empire CentralDallas, TX 75235Phone: 214-353-1689Contact: Bob [email protected]

NIC Industries7050 6th StreetWhite City, OR 97503Phone: 541-826-1922Contact: Jeff [email protected]

Normac Adhesive Products, Inc.1350 Heine CourtBurlington, ON L7L 6M4 CanadaPhone: 905-332-6455Contact: George [email protected]

Northern Industries Inc.429 Tiogue Ave.Coventry, RI 02816Phone: 401-821-2121Contact: Rick [email protected]

NOV Tuboscope2835 Holmes Rd.Houston, TX 77051Phone: 713-799-5130Contact: Ryan [email protected]

Nox-Crete Products Group1444 S. 20th StreetOmaha, NE 68108Phone: [email protected]

NSP Specialty ProductsPO Box 4690Pinehurst, NC 28374Phone: 910-235-0468Contact: Larry [email protected]

Nukote Coating Systems Canada, Inc.1257 Speers Rd.Oakville, ON L6L 2X5 CanadaPhone: 905-847-1500Contact: Daniel [email protected]

Nukote Coating Systems International2100 Reliance Pwky.Bedford, TX 76021Phone: 682-503-6799Contact:Michael [email protected]

OOak Ridge Chemical and Equipment575 Commercial Ave.Green Lake, WI 54941Phone: 800-625-9577Contact: Jed [email protected]

OCM-Adeka1215 Henri Dr.Wauconda, IL 60084Phone: 866-457-5710Contact:Mike [email protected]

PPacific Southwest Coatings18220 Watson WayYorba Linda, CA 92886Phone: 714-225-3688Contact: Laurence [email protected]

Company Profiles


22

Company Profiles

Precision Coatings, Inc.1940 East TrafficwaySpringfield, MO 65802Phone: 888-340-6780Contact: Jim O'[email protected]

Preferred Products Corp.231 S. 3rd St. Ste. BBurlington, IA 52601Phone: 319-754-4823Contact: Ken [email protected]

Premier Coating Systems Inc.606 N. Lane Avenue, #6Jacksonville, FL 32254Phone: 904-824-1799Contact: Ron [email protected]

Prime Coat Coating Systems405 Oakwood Ave.Waukegan, IL 60085Phone: 847-362-5111Contact: Kevin [email protected]

Professional Products of Kansas, Inc.4456 S. CliftonWichita, KS 67216Phone: 316-522-9300Contact: Vicky [email protected]

Protective Floorings and Linings a Div. of Milamar Coatings LLC311 NW 122nd St., Ste. 100Oklahoma City, OK 73114Phone: 405-755-8454Contact: Joanne [email protected]

Protecto Wrap Company1955 Cherokee St.Denver, CO 80223Phone: 800-759-9727Contact: Victoria [email protected]

Protek Paint Ltd.335 Horner Ave.Toronto, ON M8W 1Z6 CanadaPhone: 800-773-5233Contact: Barry [email protected]

Pyrotech1121 Hellam StreetMonterrey, CA 93940Phone: 630-628-1120Contact: Jim [email protected]

QQuadex/Interfit USA4801 Crystal Hill RoadNorth Little Rock, AR 72118Phone: 501-758-8628Contact: Stuart [email protected]

Quality Systems, Inc./Permacrete1101 Menzler RoadNashville, TN 37210Phone: 615-331-9200Contact: George [email protected]

RRainguard International3334 East Coast Hwy. Box 143Corona del Mar, CA 92625Phone: 770-331-1143Contact: Tony [email protected]

Randolph Products33 Haynes CircleChicopee, MA 01020Phone: [email protected]

Raven Lining Systems13105 East 61st St., Ste. ABroken Arrow, OK 74012Phone: 800-324-2810Contact: Kaye [email protected]

REMA Corrosion Control, Inc.119 Rockland AvenueNorthvale, NJ 07647Phone: 440-781-6226Contact: Larry [email protected]

Renner CoatingsAv. Pres. Juscelino Kubitschek de Oliveira,12.453Curitiba, 81170-300 BrazilPhone: 55 41 8728-8370Contact: Riva [email protected]

Rhino Linings Corporation9151 Rehco Rd.San Diego, CA 92121Phone: 800-422-2603Contact: Tim [email protected]

Richard's Paint Mfg. Co., Inc.200 Paint StreetRockledge, FL 32955Phone: 800-432-0983Contact: Eric [email protected]

Riley Paint Company106 Washington StreetBurlington, IA 52601Phone: 319-759-2516Contact: John [email protected]

Rock-Tred Corporation405 Oakwood AveWaukegan, IL 60085Phone: 847-673-8200Contact: Erik [email protected]

Rodda Paint Co./Cloverdale Paint6107 N. Marine Dr.Portland, OR 97203Phone: 503-572-8201Contact: Tom [email protected]

RoofMart International Inc.2735 Rain Road Chapman, KS 67431Phone: [email protected]

Roval Corp.12270 NW Luoto Ln.Carlton, OR 97111Phone: 971-237-0958Contact: Aldo [email protected]

Royal Chemical Corp.2705 Concord Rd.Belle Chasse, LA 70037Phone: 504-392-8811Contact:Mark Parkerroyalcoatings.net

Royce International, LLC3400 S. Tamiami TrailSarasota, FL 34239Phone: 941-894-1228Contact: Christine [email protected]

Rust Bullet, LLCs300 Brinkby Ave., Ste. 200Reno, NV 89509Phone: 775-829-5606Contact: Kathline A. [email protected]

Ryano Resins, Inc.800 N. Highland Ave.Aurora, IL 60506Phone: 630-621-5677Contact: Ray [email protected]

SSafe Encasement Systems1795 N. Snow Canyon Pkwy., Unit #63St. George, UT 84770Phone: 888-277-8834Contact: John [email protected]

Sampson Coatings1900 Ellen RoadRichmond, VA 23230Phone: 804-349-2820Contact: Joe [email protected]

Sauereisen, Inc.160 Gamma DrivePittsburgh, PA 15238Phone: 412-963-0303Contact: John E. [email protected]

SaverSystems/Defy800 South 7th StreetRichmond, IN 47374Phone: [email protected]

Seacoat Technology11215 Jones Rd. W., Suite HHouston, TX 77065Phone: 832-237-4400Contact: John [email protected]

Seal For Life Industries, Part of Berry Plastics Engineered Materials DivisionGasselterstraat 20Stadskanaal, 9503JB NetherlandsPhone: 31 599 696170Contact: J.F. [email protected]

ShawCor CSI Services1607 10 StreetNisku, AB T9E 0A7 CanadaPhone: 403-218-8262Contact: Sam [email protected]


23

Sherwin-Williams101 Prospect Avenue NWCleveland, OH 44115Phone: [email protected]/protectiveSee our display ads, pp. 44, 122, 146, and 154.

Simco Coatings, Inc.211 Gunther LaneBelle Chasse, LA 70037Phone: 504-393-9455Contact: Paul [email protected]

Simpson Strong-TiePO Box 10789Pleasanton, CA 94588Phone: 800-999-5099Contact: Edward [email protected]

SOPREMA310 Quadral DriveWadsworth, OH 44281Phone: 800-356-3521Contact: Jason [email protected]

Soprema, Inc.1688 J.B. MichaudDrummondville, QC J2C 8E9 CanadaPhone: 819-478-8166Contact: Dennis [email protected]

SpecChem1511 Baltimore Ave.Kansas City, MO 64108Phone: 866-791-8700Contact:Mike [email protected]

Specguard909 Mahar Ave.Wilmington, CA 90744Phone: 310-834-7037Contact: Larry [email protected]

Specialty Products, Inc. (SPI)2410 104th St. Ct. S., Ste. DLakewood, WA 98499Phone: 253-588-7101Contact: Chas [email protected]

SpectraShield Liner Systems4527 Sunbeam RoadJacksonville, FL 32257Phone: 904-419-4889Contact: Bob [email protected]

SpeedCove, Inc. DBA Solid Rock Enterprises5781 Pleasant Valley RoadEl Dorado, CA 95623Phone: 530-344-9000Contact: Doug [email protected]

Sprayroq248 Cahaba Valley Pkwy.Pelham, AL 35124Phone: 205-957-0020Contact: Jerry [email protected]

Stirling Lloyd Group Plc.Union Bank, King St.Knutsford, Cheshire, WA16 6EF U.K.Phone: 44 1565 633111Contact: Dave [email protected]

Stirling Lloyd Products, Inc.152 Rockwell Road, Building ANewington, CT 06111Phone: 860-666-5008Contact: Tom [email protected]

Sto Corp.3800 Camp Creek ParkwayAtlanta, GA 30331Phone: 678-553-3269Contact: Thomas [email protected]

The Strong Company, Inc.4505 Emmett Sanders RoadPine Bluff, AR 71601Phone: 870-535-7617Contact: Billy [email protected]

Sub-One Technology161 South Vasco Road, Suite LLivermore, CA 94551Phone: 925-924-1020Contact: Dore [email protected]

Subsea Industries NVHaven 29 - Noorderlaan 9Antwerp, 2030 BelgiumPhone: 32 3 213 53 18Contact:Manuel [email protected]

Sulzer Metco1101 Prospect Ave.Westbury, NY 11590Phone: [email protected]

Sureshield Coatings Company350 Northgate ParkwayWheeling, IL 60090Phone: 847-291-6960Contact:Michael [email protected]

TTCI Coatings, Inc.220 Industrial Blvd.Austin, TX 78745Phone: 512-444-2824Contact: Kevin [email protected]

Termarust Technologies8150 Rue de L'IndustrieMontreal, QC H1J 1S7 CanadaPhone: 888-279-5497Contact: Craig [email protected] our display ad, p. 49.

Tesla NanoCoatings, Inc.6200 Frank Ave. NW,Advanced Technical Center, T101North Canton, OH 44720Phone: 610-764-1232Contact: Joe [email protected]

Textured Coatings of America2422 E. 15th St.Panama City, FL 32405Phone: 800-454-0340Contact: Regina [email protected]

ThermionPO Box 780Silverdale, WA 98383Phone: 877-884-3428Contact: Dean [email protected]

Thin Film Technology, Inc.802 Utah StreetSouth Houston, TX 77587Phone: 713-910-6200Contact: Jeff [email protected]

Company Profiles


24

Westcoat770 Gateway Center DriveSan Diego, CA 92102Phone: 800-250-4519Contact: Dean [email protected]

WFI Global, LLC4118 Robertson Rd.Madison, WI 53714Phone: 618-978-1119Contact: Terry [email protected]

Whitford Corporation47 Park Ave.Elverson, PA 19520Phone: 610-286-3500Contact: Brian [email protected]

Wilko Paint, Inc.2727 OhioWichita, KS 67219Phone: 800-658-3799Contact: Don [email protected]

Witt Lining SystemsPO Box 488Claremore, OK 74018Phone: 918-342-0083Contact: Andrew [email protected]

Wolverine Coatings Corporation140 Metro DriveSpartanburg, SC 29303Phone: 864-342-9292Contact: Eric C. [email protected]

ZZRC Worldwide145 Enterprise Dr.Marshfield, MA 02050Phone: 800-831-3275Contact: Lorraine [email protected]

Company Profiles

The Thortex Group12 Iron Bridge Dr.Collegeville, PA 19426Phone: 610-831-0222Contact: Kevin [email protected]

3L&T Inc.897 Independence Ave. #1BMountain View, CA 94043Phone: 650-625-0177Contact: Linas [email protected]

3M Atlanta3700 Atlanta Industrial Pkwy.Atlanta, GA 30331Phone: 404-696-2730Contact: Abdul Razzak3m.com

3M Corrosion Protection Products6801 River Place Blvd.,130-4N-01 Austin, TX 78726Phone: 512-984-7801Contact:Michelle [email protected]/corrosionSee our display ad, p. 112.

3M Fire Protection Products3M Center, Bldg. 220-5W-25Minneapolis, MN 55144Phone: 651-733-0584Contact: George Yoshida3m.com/firestop

TMS Manufacturing Co.3555 W. 123rd St.Alsip, IL 60803Phone: 708-385-6633Contact:Michael [email protected]

TMS Metalizing Systems, Ltd.7665 NW Eldorado Blvd. #101Bremerton, WA 98312Phone: 360-692-6656Contact: Dave [email protected]

Tnemec Company, Inc.6800 Corporate Dr.Kansas City, MO 64120Phone: 816-483-3400Contact:Mark [email protected]

Total Containment Solutions Inc.11000 Metro Pkwy., Ste. 20Fort Myers, FL 33966Phone: 239-275-6235Contact:Michael [email protected]

Total Wall390 Viking CircleRio, WI 53960Phone: 888-702-9915Contact: Octavian [email protected]

TPR2 Corporation36 Plains Rd.Essex, CT 06426Phone: 860-767-8772Contact: Brian [email protected]

Transpo Industries, Inc.20 Jones St.New Rochelle, NY 10801Phone: 914-636-1000Contact: John [email protected]

Trenton Corporation7700 Jackson Rd.Ann Arbor, MI 48103Phone: 734-424-9614Contact: Frank Ramptontrentoncorp.com

Tuf Top Coatings4590 60th Ave. N.St. Petersburg, FL 33714Phone: 727-527-3382Contact: Greg [email protected]

21st Century Coatings, Inc.4701 Willard St., Suite 636Chevy Chase, MD 20815Phone: 301-654-0099Contact: John [email protected]

UU.S. Coatings, LLC2303 Weldon ParkwaySt. Louis, MO 63146Phone: 314-205-1500Contact:Mike [email protected]

Ultimate Linings6630 Roxburgh Ave. #175Houston, TX 77041Phone: 562-802-8834Contact: Stacy [email protected]

US Coating Solutions5948 Emerson AvenueMinneapolis, MN 55419Phone: 386-313-3033Contact: Garry [email protected]

VVersaFlex Incorporated686 S. Adams St.Kansas City, KS 66105Phone: 913-321-9000Contact: Todd [email protected]

Versatile Building Products245 Carl Karcher WayAnaheim, CA 92801Phone: 714-829-2600Contact: Jimmy McGheegaragecoatings.com

Visuron Technologies, Inc.5174 McGinnis Ferry Rd. Ste. 106Alpharetta, GA 30005Phone: 770-815-4548Contact: Tim [email protected]

WW.R. Meadows300 Industrial DriveHampshire, IL 60140Phone: 800-342-5976Contact: Jason [email protected]

Walla Walla Environmental4 West Rees Ave.Walla Walla, WA 99362Phone: 509-522-0490Contact: Cassie [email protected]

Wasser Corporation4118 B Place NW, Ste. BAuburn, WA 98001Phone: 800-627-2968Contact: Kevin [email protected] our display ad, p. 136.

Watson Coatings, Inc.325 Paul Ave.St. Louis, MO 63135Phone: 314-521-2000Contact: Paul [email protected]


Documents

PAINTSQUARE.COM JOURNAL OF PROTECTIVE ......is seen in some batches of paint after mixing, and can also clog the spray tip. Repeatability tests were carried out with each coat-ing