Joseph C. Hartman, Ph.D., P.E. - College of Engineering · 2013. 5. 26. · Joseph C. Hartman • 2May, 2012 PROFESSIONAL REGISTRATION: Professional Engineer, (Passed P.E. Exam) State

Joseph C. Hartman, Ph.D., P.E. Professor and Chair

Industrial and Systems Engineering, University of Florida

Office: 301 Weil Hall PO Box 116595 Gainesville, FL 32611-6595 Phone: (352) 392-1464 Fax: (352) 392-3537 E-mail: [email protected] Internet: http://www.ise.ufl.edu

ACADEMIC POSITIONS:

Chair, University of Florida, Gainesville, FL 2007-Present Department of Industrial and Systems Engineering

Professor, University of Florida, Gainesville, FL 2007-Present Department of Industrial and Systems Engineering

Chair, Lehigh University, Bethlehem, PA 2005-2007 Department of Industrial and Systems Engineering

Interim Chair, Lehigh University, Bethlehem, PA 2005 Department of Industrial and Systems Engineering

Associate Professor, Lehigh University, Bethlehem, PA 2002-2007 Department of Industrial and Systems Engineering

Visiting Associate Professor, University of Edinburgh, Scotland, United Kingdom 2003-2004 Department of Business Studies, Management Science Group, The Management School

Assistant Professor, Lehigh University, Bethlehem, PA 1997-2002 Department of Industrial and Manufacturing Systems Engineering

Visiting Assistant Professor, Lehigh University, Bethlehem, PA 1996-1997 Department of Industrial and Manufacturing Systems Engineering

Graduate Research Assistant, Georgia Institute of Technology, Atlanta, GA 1992-1996 School of Industrial and Systems Engineering

Graduate Teaching Assistant, Georgia Institute of Technology, Atlanta, GA 1993-1996 School of Industrial and Systems Engineering

Graduate Research Assistant, University of Dortmund, Germany 1995 Fraunhofer Institute for Material Flow and Logistics

Undergraduate Research Assistant, University of Illinois at Urbana-Champaign 1990-1992 Department of General Engineering

EDUCATION:

Ph.D., Industrial and Systems Engineering, Georgia Institute of Technology -- June, 1996 Program Concentration - Engineering Economic Decision Analysis

M.S., Industrial Engineering, Georgia Institute of Technology -- March, 1994 Program Concentration - Engineering Economic Decision Analysis

B.S., General Engineering with Honors, University of Illinois at Urbana-Champaign -- May, 1992 International Minor - Germanic Studies

Joseph C. Hartman • May, 2012 2

PROFESSIONAL REGISTRATION:

Professional Engineer, (Passed P.E. Exam) State of Pennsylvania, January, 2003

Engineering Intern, (Passed EIT Exam) State of Illinois, May, 1992

INDUSTRIAL EXPERIENCE:

Operations Research Contractor and Intern, March, 1996 -- August, 1996 Norfolk Southern Corporation -- Atlanta, GA

Manufacturing Engineering Intern, May, 1992 -- August, 1992 International Business Machines -- Poughkeepsie, NY

Engineering Technician, May, 1991 -- August, 1991 Illinois Department of Transportation -- Schaumburg, IL

KEY ADMINISTRATIVE ACCOMPLISHMENTS AT THE UNIVERSITY OF FLORIDA Many individuals, including faculty, staff, students and external constituent groups, have contributed to and led to the accomplishments presented below:

• Achieved highest program rankings according to U.S. News & World Report in history of program, including 10th overall, 8th public for graduate and 12th overall, 10th public for undergraduate in the latest report. (Graduate program was ranked 15th overall and undergraduate program was unranked upon my arrival in 2007.)

• Increased tenure track faculty from 13 to 15 from 2007 to 2011 and currently searching for 16th member. Successfully promoted six faculty members (four with tenure). Hired five faculty members since 2008.

• Managed state resources of roughly $3 million per year over the past five years. (State appropriations have declined annually but total resources have remained relatively constant due to new faculty lines.)

• Averaged $1.583 million in federal research expenditures from 2007 to 2011, up from $1.094 million in 2006 (according to ASEE published data), or a 45% increase.

• Increased graduate research space by 1000 ft2 (14 desks and workstations), renovated a further 3450 ft2 of research space (30 desks and workstations, four offices and conference room) and established a 340 ft2 senior design laboratory (two dedicated workstations with high-end software, storage and meeting space) with private funds.

• Developed Systems Engineering program with online delivery. Enrollments have tripled since 2009.

• Established 4+1 BS/MS in ISE program, which currently enrolls 15 students. New 4+1 BS in ISE/MS in Finance to debut in Fall of 2012.

• Increased master’s program enrollment by 34% and undergraduate enrollment by 37% since 2006. Averaged 91 B.S., 116 M.S./M.E., and 9.4 Ph.D. graduates per year over the past five years.

• Increased Outreach Engineering Management enrollments by 31% with direct revenue benefits to Department, College and University. The program has generated nearly $400,000 per year in excess revenue over the past five years. This is shared between the Department, College of Business and University.

• Created the position of ISE Development Director (2/3 funded by Department and 1/3 by College) to focus on large gifts for Department. Four large gifts (greater than $100,000) have been secured over four years. Increased endowed funds three-fold and unrestricted funds over ten-fold in that time.

• Initiated ISE Alumni Leadership Award defining Department Hall of Fame to recognize influential alumni on an annual basis. Introduced at gala event celebrating 75th Anniversary of Department.


• Successfully nominated five ISE alumni for University Distinguished Alumnus Awards.

• Revamped, revised and expanded Industrial Advisory Board to increase corporate partnerships and alumni relations. Board Bylaws written to define membership roles according to Curriculum, Industry Liaison and Development committees.

• Initiated industrial sponsorship of senior design capstone project course to enhance student learning experience and increase Department funds. Sponsors have included BAE Systems, Coca-Cola, Nielsen, Northrop Grumman, Pepsi, Procter & Gamble, Raytheon, Rockwell Collins and UPS as well as non-profit entities including Shands Hospital, the College of Dentistry and the U.S. Air Force, Army and Navy. The program has generated $215,000 over four years with over 50 projects completed.

• Established Student Advisory Council such that student leaders would meet monthly with the Chair to facilitate communication between students and faculty and help set student group agendas. Established ISE Ambassadors, a student group designated to interface with alumni and recruit new students, an INFORMS Student Chapter to facilitate undergraduate student research, and a Student Sales Engineering Society to help open new career opportunities for students.

• Developed and delivered first undergraduate online course (Engineering Economy) in the College facilitating 400+ enrollments per year.

• Initiated Department Newsletter (printed three times per year) and Monthly E-newsletter (student driven).

• Launched new Department Website in Fall of 2011 to facilitate timely news stories about department. Alumni LinkedIn group page established Fall of 2008.

• Established Department Bylaws and formal Teaching Load Policy. A new graduate student handbook is currently being written.

KEY ADMINISTRATIVE ACCOMPLISHMENTS AT LEHIGH UNIVERSITY Many individuals, including faculty, staff, students and external constituent groups, have contributed to and led to the accomplishments presented below:

• Developed and delivered ISE course for Integrated Business and Engineering program, a joint honors program between the Colleges of Business and Engineering.

• Established undergraduate advisory board with Lehigh Valley Hospital, Lockheed Martin, PriceWaterhouseCoopers, and UPS as initial members.

• Established satellite delivery of Information and Systems Engineering program.

• Established Communications Coordinator position to provide marketing/web support and outreach.

PROFESSIONAL ACTIVITIES:

Publication Editorial Positions Editor-in-Chief, The Engineering Economist, 2004-present • Celebrated 50th Volume with anniversary issues (six invited papers), 2005 • Refined scope of journal with designation of seven areas (with expanded editorial board), 2005 • Initiated electronic retrieval capability of all back issues, 2005 • Initiated electronic submission and review process, 2004 and 2007 (web format) • Initiated review to index the journal, 2004 (Accepted by ISI in 2012) Area Editor, The Engineering Economist, 1998-2004 Editorial Review Board, “Engineering Economy,” (Management Systems Division) American National

Standard for Industrial Engineering Terminology, ANSI Z94.7, 2004-2005 Guest Editor, IMA Journal of Management Mathematics special issue on Maintenance, Replacement and

Reliability, 2002-2004


Advisory Board for Educator’s Reviews, The Wall Street Journal, 2001-2005 Educators’ Review Author, The Wall Street Journal, 2001-2003

Conference Organization Industrial Engineering Research Conference • Invited Track Organizer, Engineering Economy, May 2008 • Engineering Economy, Session Chair, May 2008 • Conference Program Planning Committee, May 2007 • Conference Program Planning Committee, May 2006 • Conference Program Planning Committee, May 2005 • Chair, Doctoral Colloquium Organizing Committee, May, 2003 • Invited Track Organizer, Engineering Economy, May 2003 • Conference Program Planning Committee, May 2003 • Capacity Planning and Replacement Analysis, Sessions Chair, May 2003 • Engineering Economy I, Session Chair, May 2000 • Conference Program Planning Committee, May 1998 • Engineering Economy Division Program Chair, May 1998 • Engineering Economy Division I, Session Chair, May 1998 • Engineering Economy Division II, Session Chair, May 1998 • Decision Models in Engineering Economics, Session Chair, May 1997 ASEE Annual Conference and Exposition • Engineering Economy Division, Program Chair, June, 2001 INFORMS Annual Meeting • Parallel Replacement Analysis, Session Organizer and Chair, May, 1999 • Logistics, Session Chair, May, 1999 IFORS Triennial Meeting • Stream Organizer on Maintenance, Replacement and Reliability, July 2002 • Session Chair on Maintenance Modeling, July 2002 International Conference on Flexible Automation and Intelligent Manufacturing • Conference Program Planning Committee, July 2002 International Conference on Industrial Engineering Applications and Practice • Engineering Economy and Cost Estimation, Session Chair, November, 1997 Lehigh University Manufacturing Systems Engineering Conference with Industry • Logistics, Session Chair, May, 1998

Tenure and/or Promotion Case Evaluator Auburn University, 2011 University of Texas at Arlington, 2011 University of Central Florida, 2011 Missouri University of Science and Technology (Formerly Missouri at Rolla), 2010 Texas State University, 2010 Lehigh University, 2009 University of Houston, 2008, 2009, 2011 Iowa State University, 2007 Clemson University, 2007 University of Nebraska, Lincoln, 2007 University of Southern California, 2007, 2011, 2012 University of Texas at Dallas, 2005 University of Arkansas, 2004 Penn State University, Berks-Lehigh Valley Campus, 2004 Professional Societies Institute of Industrial Engineers, Senior Member, 2003-present, Member, 1995-2003


• IIE Board of Trustees, 2006-08 • Senior Vice President, Publications, 2006-08 • Member, Audit Committee, 2006-08 (Chair, 2008) • Student Paper Competition, Judge, May 2008, 2009 • IIE Transactions Best Paper Award Committee, 2006 • Engineering Economy Division Director (Division won Gold Award), 1998-1999 • Engineering Economy Division Program Chair (Division won Gold Award), 1997-1998 • Engineering Economy Division Newsletter Editor (Division won Silver Award), 1996-1997 • Engineering Economy Division Webpage Editor, 1996-2002 • Lehigh Valley Chapter Newsletter Editor, 2002-2003 • Lehigh Valley Chapter President, 2000-2002 • Lehigh Valley Chapter Vice President of Program, 1998-2000

Council of Industrial Engineering Academic Department Heads, Member, 2005-present • Chair, 2012 • Secretary, 2011

SIAM, Member, 2009-present

Sigma Xi, Member, 2006-present

Institute for Operations Research and Management Science, Member, 1993-present • Association of Chairs of Operations Research Departments (ACORD), Chair, 2010-2011 • Association of Chairs of Operations Research Departments (ACORD), Vice Chair, 2009-2010

American Society for Engineering Education, Member, 1995-present • Trustee, Eugene L. Grant Award Fund, 2005-present • Engineering Economy Division Chair, 2001-2002 • Engineering Economy Division Program Chair, 2000-2001 • Engineering Economy Division Secretary-Treasurer, 1999-2000 • Engineering Economy Division Newsletter Editor, 1998-1999 • Engineering Economy Division Webpage Editor, 1998-2003

Society of Manufacturing Engineers, Member, 1998-1999

National Society of Professional Engineers, Member, 1992-1999, 2003-present • Florida Society of Professional Engineers, Member, 2007-present • Pennsylvania Society of Professional Engineers, Member, 1996-99, 2003-07 • Georgia Society of Professional Engineers, Member, 1993-96

Illinois Society of General Engineers, Member, 1988-1992 • Newsletter Editor, 1988-1989

UNIVERSITY ACTIVITIES:

University of Florida University Level Advanced Leadership for Academics and Professionals, Academic Track, 2011-12 College Level Associate Dean of Research Search Committee Member, 2012 Engineering Leadership Center Director Search Committee Member, 2011-present Informal Chairs Meeting Council Head, 2011-present Engineering School of Sustainability Director Search Committee Chair, 2010-2011 Responsibility Centered Management (RCM) Committee, 2009-2010 Information Technology Strategic Planning Committee, 2009-2010 Review Board, Florida Engineer, 2007-2010


Review Board, IPPD program, 2007-present Council of Chairs, 2007-present

Lehigh University University Level National Research Council, Program Respondent, 2006 Sloan Grant Executor, 2006 Faculty Diversity Committee Member, 2005-07 Search Committee Member, College of Education, 2006-07 Search Committee Member, Accounting, College of Business and Economics, 2006-07 Frank Hook Assistantship Award Recommendation Committee Member, 2006 Dean’s Annual Review Committee, 2005-07 ADVANCE Proposal Committee Member, 2005 Search Committee Member, Perella Chair, Department of Finance, CBE, 2005-2006 Bioengineering Program Oversight Committee, 2005-present Search Committee Member, Dean, College of Engineering and Applied Science, 2004 Search Committee Member, Dean, College of Arts and Science, 2002-03 Faculty Governance Review Committee, 2002-04 Faculty Athletics Counsel, 2002-present Search Committee Member, Vice-Provost of Research, 1999 Business-Engineering College Course Integration Task Force Member, 2000-01 Summer Sessions Advisory Committee Member, 1999-2001

College Level Council of Chairs, 2005-07 Faculty Fellows Committee, 2002-05 College Visibility Taskforce, 2004 CAREER Award Mentoring Committee, 2000-05 College Course Development in Numerical Methods Committee Member, 2000 Computer Science and Industrial Systems Engineering Program Coordinator Committee Member, 2001 Engineering Freshman Advisor, 1998-2001

Department Level Graduate Program Advisor, 2001-07 • Responsible for curriculum and advising of all department graduate students Graduate Program Committee, 1999-07 • Committee Chair, 2001-07 • Introduced Ph.D. Core and revised graduate curriculum, Spring, 2003 Management Science Graduate Program Liaison, 1997-2001 Institute of Industrial Engineers Student Chapter Advisor, 1998-2004 • Chapter won Gold Award, 1999 and 2000; Bronze Award, 2001 and 2002 Undergraduate Curriculum Board, 1996-2001 • Introduced Senior Thesis option for students interested in graduate school, Spring, 2000 Search Committee Member, Professor, 1999-2002 Search Committee Member, Visiting Professor, 1998-99 Graduate Qualifier Exam Board, 1996-2006

Georgia Institute of Technology Department Level Student Mentor Program, 1993-96 Student-Faculty Liaison Committee, 1993-94

University of Illinois at Urbana-Champaign Department Level (Industrial and Enterprise Systems Engineering) Alumni Advisory Board, 2009-present


Engineer in Residence, Fall, 2009

HONORS:

Wellington Award, Engineering Economy Division, Institute of Industrial Engineers, 2012 • In recognition outstanding contributions in the field of engineering economy.

ASEE Eugene L. Grant Award (with K. Brunson, B. DeLee, J. Nachtigal and B. Hill), 2012 • In recognition of the best paper published in Volume 56 of The Engineering Economist.

ASEE Eugene L. Grant Award (with Ted Eschenbach and Neal Lewis), 2009 • In recognition of the best paper published in Volume 53 of The Engineering Economist.

Department of Industrial and Systems Engineering Teacher of the Year, 2009-10 • Independent student vote organized by the Institute of Industrial Engineers.

Scott T. Poage Distinguished Lecturer, University of Houston, October, 2008 • Semi-annual lecture honoring former Industrial Engineering chair that started the Ph.D. program.

Soteria and George N. Kledaras ‘87 Endowed Chair, 2003-2007 • In recognition of outstanding scholarship in systems and financial engineering.

ASEE Engineering Economy Division Best Paper Award, 2006 • In recognition of the best paper published by EED in Proceedings of the 2006 ASEE Conference.

ASEE Eugene L. Grant Award (with Ingrid Schafrick), 2005 • In recognition of the best paper published in Volume 49 of The Engineering Economist.

Pennsylvania Society of Professional Engineers, LV Chapter Young Engineer of the Year Award, 2005 • In recognition of professional achievement, active citizenship, and educational affairs.

Dean’s Merit Award, 2004 • In recognition of significant productivity and contributions to RCEAS goals.

Institute of Industrial Engineers Outstanding Young Industrial Engineer of the Year Award, 2002 • In recognition of outstanding performance and unusual promise in the IE profession.

Frank Hook Assistant Professorship, 2001-2003 • In recognition of outstanding scholarship and mentoring by an Assistant Professor at Lehigh.

Alfred Noble Robinson Award, 2001 • In recognition of outstanding performance in service and unusual promise of professional achievement.

National Science Foundation CAREER Award, 2000 • Recognizes and supports the early career-development activities of teacher-scholars who are most

likely to become the academic leaders of the 21st century. • This program is the National Science Foundation's most prestigious award for new faculty members.

ASEE Eugene L. Grant Award, 2000 • In recognition of the best paper published in Volume 44 of The Engineering Economist.

Department of Industrial and Manufacturing Systems Engineering Teacher of the Year, 1998-99 • Independent student vote organized by the Industrial Engineering Council.

Sigma Xi, The Scientific Research Society, 2006 Phi Eta Sigma, National Scholastic Honor Society Gamma Epsilon, General Engineering Honors Fraternity Phi Kappa Theta Foundation Scholastic Award 1991 and 1992 FUNDED RESEARCH:

“Integrating Dynamic Programming within Mixed-Integer Programming Techniques,” National Science Foundation, Civil, Mechanical and Manufacturing Innovation, (Co-Principal Investigator with J. Cole Smith), April, 2011 -- March, 2014, $290,000 (CMI-1100765).

Research: Solving integer programming problems using cutting planes generated from equivalent dynamic programming models.


“Graduate Fellowship in Security,” Sandia National Laboratory, (Principal Investigator with J. Cole Smith), August, 2011 -- August, 2012 (renewable), $25,000.

Research: Competitive fellowship to support a Ph.D. student. “Equipment Replacement under Continuous and Discontinuous Technological Change,” National Science

Foundation, Design and Manufacturing Innovation, (Principal Investigator), September, 2006 -- August, 2010, $230,000 (DMI-0600601 and CMI-0813671).

Research: Large-scale stochastic dynamic programming for replacement analysis under various types of technological change.

“Industrial and Systems Engineering (ISE) Senior Design Laboratory Development,” Rockwell Collins

Charitable Corporation, (Principal Investigator with Tasha Martin and Eric Stern), June, 2010 – December, 2010, $25,000.

Research: Lab renovation for senior design project team work area. “Research Experience for Undergraduates,” National Science Foundation (Principal Investigator),

September, 2006 -- August, 2009, $6,000. Research: Supplement for undergraduates to participate in applications of developed models. “Engineering Economy Online Course Development,” University of Florida Provost E-Learning Initiative

(Principal Investigator with Cammy Abernathy, Kirk Hatfield and James Heaney), June 2009 – May 2010, $30,000.

Research: Develop and implement a modular undergraduate engineering economy online course. “Integrating the Engineering Curriculum: Careers and Concentrations, Toolboxes and Technology,”

National Science Foundation, Engineering Education and Centers, (Principal Investigator with L. J. Plebani, G. L. Tonkay, and A. M. Ross), September, 2005 – August, 2006, $100,000 (EEC-0530620).

Research: This is a planning grant to provide funds for department level curricular revisions. “Optimizing Equipment and Technology Investments at Lehigh Valley Hospital,” Lehigh Valley Hospital

and PITA, (Principal Investigator), May, 2006 -- June, 2007, $34,000. Research: Optimizing equipment replacement decisions and integrating into capital budgeting plan. “Optimizing Ambulance Operational Schedules,” St. Luke’s Hospital Emergency Transport Services and

PITA, (Principal Investigator), July, 2006 -- June, 2007, $22,500. Research: Evaluating and improving the scheduling of non-emergency, ambulance transport services. “A Study of Portfolio Metrics for Prioritization, Phase II” Johnson and Johnson Pharmaceutical Services,

LLC, (Principal Investigator), May, 2006 -- December, 2006, $15,000. Research: Study of R&D investment decisions with the use of dynamic programming. “Equipment Gift in Support of Engineering Reform,” Hewlett-Packard Company, (Principal Investigator

with L. J. Plebani, G. L. Tonkay, and A. M. Ross), September, 2005 – August, 2006, $2,948. Gift: This equipment gift provides funds for implementing department level curricular revisions. “Business Optimization at Cherrydale Farms, Phase II,” Cherrydale Farms (Principal Investigator with R.

H. Storer and Productivity Management Consultants), February, 2006 -- August, 2006, $51,968. Research: Optimizing production planning and scheduling to increase throughput. “Business Optimization at Cherrydale Farms, Phase I,” Cherrydale Farms (Principal Investigator with R. H.

Storer and Productivity Management Consultants), December, 2005 -- January, 2006, $30,000. Research: Business operations assessment for optimization opportunities.


“CAREER: Large-Scale Parallel Replacement Analysis,” National Science Foundation, Manufacturing and

Industrial Innovation, (Principal Investigator), June, 2000 -- May, 2005, $278,000 (DMI-9984891). Research: Large-scale integer and dynamic programming for parallel replacement problems under

economies of scale, and demand, budgeting and reliability constraints. “A Study of Portfolio Metrics for Prioritization,” Johnson and Johnson Pharmaceutical Services, LLC,

(Principal Investigator), December, 2004 -- May, 2005, $15,000. Research: Study of R&D investment decisions and policies and development of dynamic measures of worth. “ISO Certification and Equipment Planning,” ATAS International, Inc., (Principal Investigator), September,

2004 -- May, 2005, $12,285. Research: Study of equipment policies as they relate to ISO standards. “Large-Scale Dynamic Programming at the University of Edinburgh,” National Science Foundation

(Principal Investigator), August, 2003 -- May, 2004, $17,000. Research: CAREER supplement to support sabbatical at the University of Edinburgh and study large-scale

dynamic programming. “Research Experience for Undergraduates,” National Science Foundation (Principal Investigator), August,

2000 -- August, 2001, $10,000. Teaching: CAREER supplement to improve the teaching of Engineering Economy through new course

materials. “Automated Cost Estimation and Inventory Planning at Sealstrip Corporation,” Productivity Management

Consultants and Sealstrip Corporation (Principal Investigator), August, 2002 -- August, 2003, $25,000. Research: Improved operations management through ERP implementation. “Impact of Asset Utilization on Replacement Decisions,” National Science Foundation Manufacturing and

Industrial Innovation, (Principal Investigator with G. R. Wilson), September, 1997 -- August, 2001, $199,842 (DMI-9713690).

Research: Large-scale time-space network analysis with uncertain travel time using Benders decomposition and Lagrangean relaxation. Stochastic dynamic programming for replacement analysis under uncertain or variable asset utilization.

“Research Experience for Undergraduates,” National Science Foundation (Principal Investigator with G. R.

Wilson), September, 1998 -- August, 2001, $8,750. Research: Data analysis for implementation of research in a fleet sizing problem. “Asynchronous Learning Support System,” Lehigh University Ventures Program (Co-Principal Investigator

with L. J. Plebani), July, 2001 – June, 2002, $11,300. Research: Developing modules to support classroom learning using the Internet. “Capacity Planning and Equipment Utilization at Martin Guitar,” Productivity Management Consultants

and C. F. Martin Guitar Company (Principal Investigator), March, 2001 -- December, 2001, $18,000. Research: Replacement analysis in a production line environment with dynamic programming. “Load Optimization Research and Development for TRL, Phases II and III,” Transcontinental Refrigerated

Lines and the Ben Franklin Technology Center (Principal Investigator with R. H. Storer), May, 1998 – June, 1999, $124,400.

Research: Development of computer software to support dynamic assignment decisions.


“Load Optimization Research and Development for TRL, Phase I,” Transcontinental Refrigerated Lines (Principal Investigator with R. H. Storer), January, 1998 – April, 1998, $7,500.

Research: Proof of concept with generalized dynamic assignment problem implementation. “Lehigh University Faculty Research Grant,” Lehigh University Office of Research and the Department of

Industrial and Manufacturing Systems Engineering (Principal Investigator), January, 1998 -- June, 1998, $850.

Research: Algorithm testing for parallel replacement problems. “Multi-Attribute and Environmental Considerations in Economic Decision Analysis,” Lehigh Earth

Observatory (Principal Investigator), November, 1997 -- May, 1998, $900. Teaching: Development of module in multi-attribute decision making for Engineering Economy course. “Asset Management and Utilization Project,” Norfolk Southern Corporation (Co-Principal Investigator

with J. R. Lohmann), March, 1994 -- February, 1996, $22,000. Research: Large-scale integer programming implementations of parallel replacement analysis problems

for railcar management. STUDENT SUPERVISION:

University of Florida Ph.D. Dissertation Advisor and Committee Chair: Clay Koschnick (Summer 2012) “Designing Performance Guarantee Contracts” Tianke Feng (Summer 2012) “Dynamic and Stochastic Cargo Loading” Chin Hon Tan, currently with National University of Singapore Spring 2012 “Equipment Replacement under Uncertainties” I. Esra Buyuktahtakin, currently with Wichita State University, Wichita, KS Summer 2009 “Mixed Integer Programming Approaches to Lot-Sizing and Asset Replacement Models” Lehigh University Ph.D. Dissertation Advisor and Committee Chair: Kamonkan Laksana, currently with Thailand communications industry Spring 2007 “Pricing Extended Warranties” Pinar Keles, currently with Air Products Corporation, Trexlertown, PA Spring 2007 “Evaluating Portfolios of Multistage R&D Investment Projects” Jennifer Rogers, currently with Bristol Meyers Squibb, NJ Spring 2005 “Replacement Analysis under Continuous and Discontinuous Technological Change” Thomas Perry, currently with Agere Systems, Allentown, PA Fall 2004 “Product Selection through Solving a Stochastic, Dynamic, Multi-knapsack Problem” Shangyuan Luo, currently with Sentient Jet, Boston, MA Fall 2003 “Investigations in Parallel Replacement Analysis” Jinlong Ban, currently with Health Products Research, Whitehouse, NJ Fall 2003 “The Parallel Replacement Problem under Deterioration and Technological Change” Peter Huegler, currently with Lock Haven University, Lock Haven, PA Spring 2003 “Fulfilling Customer Orders for Steel Plates” Peiling Wu, currently with GM Research, Warren, MI Spring 2001 “An Integrated Rental Fleet Sizing Model and Large-Scale Two-Phase Solution Procedure”


TEACHING EXPERIENCE:

University of Florida EIN 3101, Introduction to Industrial and Systems Engineering, Undergraduate, Required EIN 4335, Senior Design Project, Undergraduate, Required EIN 4354, Engineering Economy, Undergraduate, Required EIN 4930, Sales Engineering Seminar, Undergraduate, Elective EIN 6227, Quality Engineering and Process Improvement, Graduate, Required (OEM Program)

Lehigh University IE 111, Probability and Statistics for Engineers, Undergraduate, Required IE 226 (formerly IE 124), Engineering Economy and Decision Analysis, Undergraduate, Required IE 251, Production and Inventory Control, Undergraduate, Required IE 413, Advanced Engineering Economy and Replacement Analysis, Graduate, Elective IE 411, Networks and Graphs, Graduate IE 441, Financial Engineering Project, Graduate, Required (Analytical Finance Program) IBE 98, Integrated Business and Engineering Junior Year Lab, Undergraduate, Required ENGR 1, Engineering Computations (Course Leader), Undergraduate, Required ENGR 1, Engineering Computations (Recitation Instructor), Undergraduate, Required ENGR 5, Engineering Practicum (ISE Project Instructor), Undergraduate, Required MSE 425, Production Control, Graduate, Required

Georgia Institute of Technology ISyE 3025, Engineering Economy, Undergraduate, Required ISyE 4897, Economics of Engineering Design, Undergraduate, NSF Experimental Course REFEREED JOURNAL PUBLICATIONS:

Tan, C. H. and J. C. Hartman, “Stochastic, Regret, and Regret-Theoretic Dominance,” submitted to Decision Analysis, March, 2011.

Tan, C. H. and J. C. Hartman, “Optimal Product Line for Consumers that Experience Regret,” submitted to

Management Science, March, 2012. Feng, T. K. and J. C. Hartman, “The Dynamic Knapsack Problem with Postponement Options,” submitted

to Mathematics of Operations Research, July 2011, under revision. Keles, P., J. C. Hartman and J. M. Kloeber, Jr., “Evaluating Portfolios of Multi-stage Investment Projects

with Approximate Dynamic Programming,” submitted to OMEGA, The International Journal of Management Science, July, 2009, under revision.

Feng, T. K. and J. C. Hartman, “The Sequential Stochastic Assignment Problem with Postponement

Options,” submitted to Probability in the Engineering and Informational Sciences, March, 2011, revised July 2011, revised November 2011, accepted May 2012.

Bazargan, M. and J. C. Hartman, “Aircraft Replacement Strategy: Model and Analysis,” Journal of Air

Transport Management, to appear. Brunson, K., B. DeLee, J. Nachtigal, B. Hill and J. C. Hartman, “Case Study: Transport Carrier

Replacement Analysis,” The Engineering Economist, 54(4):354-384, 2011. Tan, C. H. and J. C. Hartman, “Sensitivity Analysis in Markov Decision Processes with Uncertain Rewards

Parameters,” Journal of Applied Probability, 48(4), 2011.


Kulp, A. and J. C. Hartman, “Optimal Tax Depreciation with Loss Carry-Forward and Backward Options,” European Journal of Operational Research, 208:161–169, 2011.

Hartman, J. C., I. E. Buyuktahtakin and J. C. Smith, “Dynamic-programming-based inequalities for the

capacitated lot-sizing problem,” IIE Transactions, 42(12): 915-930, 2010. Laksana, K., and J. C. Hartman, “Planning Product Design Refreshes with Service Contract and

Competition Considerations,” International Journal of Production Economics, 126(2):189-203, 2010. Wu. P. and J. C. Hartman, “Case Study: Solving a Rental Fleet Sizing Model with a Large Time–Space

Network,” The Engineering Economist, 55(1):71-104, 2010. Tan, C. H. and J. C. Hartman, “Equipment Replacement under an Uncertain Finite Horizon,” IIE

Transactions, 42(5):342-353, 2010. Perry, T. C. and J. C. Hartman, “An Approximate Dynamic Programming Approach to Solving a Dynamic,

Stochastic Multiple Knapsack Problem,” International Transactions on Operational Research 16:347–359, 2009.

Hartman, J. C. and K. Laksana, “Designing and Pricing Menus of Extended Warranty Contracts,” Naval

Research Logistics, 56:199-214, 2009. Eschenbach, T. G., N. Lewis and J. C. Hartman, “Waiting Cost Models for Real Options,” The Engineering

Economist, 54(1):1-21, 2009. Lewis, N., T. G. Eschenbach and J. C. Hartman, “Can We Capture the Value of Option Volatility?”

submitted to The Engineering Economist, 53(3): 230-258, 2008. Eschenbach, T. G., N. Lewis, M. Henrie, E. Baker, and J. C. Hartman, “Real Options and Real Engineering

Projects,” Engineering Management Journal,19(4):11-19, 2007. Huegler, P. and J. C. Hartman, “Fulfilling Customer Orders for Steel Plates from Existing Inventory,”

Journal of the Operational Research Society, 58:1156-1166, September, 2007. Hartman, J. C., S. L. Liedtka and L. V. Snyder, “The Impact of US Tax Depreciation Law on Asset

Location and Ownership Decisions,” Computers and Operations Research, 34(12):3560-3568, 2007. Sharma, M., J. C. Ammons and J. C. Hartman, “Asset Management with Reverse Product Flows and

Environmental Considerations,” Computers and Operations Research, 34(2):464-486, 2007. Hartman, J. C. and T. C. Perry, “Approximating the Solution of a Dynamic, Stochastic, Multiple Knapsack

Problem,” Journal of Control and Cybernetics, 35(3):535-550, 2006. McGeary, T. and J. C. Hartman, “Electronic Resource Management: A Multi-Period Capital Budgeting

Approach,” The Engineering Economist, 51(4):335-350, 2006. Hartman, J. C. and J. L. Rogers, “Dynamic Programming Approaches for Equipment Replacement

Problems with Continuous and Discontinuous Technological Change,” IMA Journal of Management Mathematics, 17(2):143-158, 2006.


Hartman, J. C. and A. Murphy, “Finite Horizon Equipment Replacement Analysis,” IIE Transactions, 38:409-419, 2006. (Article featured in research executive summaries of Industrial Engineer, 38(5):52-53, May, 2006.)

Hartman, J. C., “A note on ‘A strategy for optimal equipment replacement’,” Production Planning and

Control, 16(7):733-739, 2005. Wu, P., J. C. Hartman and G. R. Wilson, “An Integrated Model and Solution Approach for Fleet Sizing

with Heterogeneous Assets,” Transportation Science, 39(1):87-103, 2005. Rogers, J. L., and J. C. Hartman, “Equipment Replacement under Continuous and Discontinuous

Technological Change,” IMA Journal of Management Mathematics, 16:23-36, 2005. Keles, P. and J. C. Hartman, “Case Study: Bus Fleet Replacement,” The Engineering Economist, 49(3):253-

278, 2004. Hartman, J. C. and I. Schafrick, “The Relevant Rate of Return,” The Engineering Economist, 49(2):139-

158, 2004. Hartman, J. C., “Multiple Asset Replacement Analysis under Variable Asset Utilization and Stochastic

Demand,” European Journal of Operational Research, 159(1):145-165, 2004. Wu, P., J. C. Hartman and G. R. Wilson, “A Demand-Shifting Feasibility Algorithm for Benders

Decomposition,” European Journal of Operational Research, 148:570-583, 2003. Hartman, J. C., “New Depreciation Rules and their Impact on Capital Investment from the Job Creation and

Worker Assistance Act of 2002,” The Engineering Economist, 47(3):354-367, 2002. Hartman, J. C. and J. Ban, “The Series-Parallel Replacement Problem,” Robotics and Computer Integrated

Manufacturing, 18:215-221, 2002. Hartman, J. C. and R. V. Hartman, “After-Tax Economic Replacement Analysis,” The Engineering

Economist, 46(3):181-204, 2001. Hartman, J. C., “An Economic Replacement Model with Probabilistic Asset Utilization,” IIE Transactions,

33(9):717-729, 2001. Hartman, J. C., “On the Equivalence of Net Present Value and Economic Value Added as Measures of a

Project's Economic Worth,” The Engineering Economist, 45(2):158-165, 2000. Hartman, J. C., “The Parallel Replacement Problem with Demand and Capital Budgeting Constraints,”

Naval Research Logistics, 47:40-56, 2000. Hartman, J. C., “A General Procedure for Incorporating Asset Utilization Decisions into Replacement

Analysis,” The Engineering Economist, 44(3):217-238, 1999. Hartman, J. C., L. W. Clarke and J. R. Lohmann, “Solving Large Parallel Replacement Problems with

Minimum Cost Flow Models,” Engineering Valuation and Cost Analysis, 2:211-224, 1999. Hartman, J. C. and R. F. Hercek, “Replacement Analysis under Risk using a Fuzzy Logic Approach,”

Engineering Valuation and Cost Analysis, 2(2):93-102, 1999.


Hartman, J. C., “A linear programming formulation with integer solutions for an equipment replacement problem with multiple assets: the concave demand case,” International Journal of Systems Science, 29(11):1225-1234, 1998.

Hartman, J. C. and J. R. Lohmann, “Multiple Options in Parallel Replacement Analysis: Buy, Lease or

Rebuild,” The Engineering Economist, 42(3):223-248, Spring 1997. Hartman, J. C., “A Note on the Fleet Design Problem,” The Engineering Economist, 41(1):69-75, Fall

1995. BOOKS and BOOK CHAPTERS:

Hartman, J. C., Engineering Economy and the Decision-Making Process, Prentice Hall Inc., Upper Saddle River, NJ, 728 pages, 2007. (Chinese Traditional Translation printed by Pearson Education Taiwan, 2010)

Adoptions include: Case Western Reserve, University of Florida, Illinois Institute of Technology, Lehigh University, Mississippi State University, Ohio State University, Portland State University, University of Missouri (Columbia), University of San Diego, University of Virginia (Charlottesville).

Hartman, J. C. and C. H. Tan, “Modeling Technological Change in Equipment Replacement Models”

Chapter 3 (pp. 70-91) in Optimal Control of Age-structured Populations in Economy, Demography, and the Environment, Raouf Boucekkine, Natali Hritonenko and Yuri Yatsenko (eds.), Taylor and Francis (Routledge Explorations in Environmental Economics), London, UK, 2011.

Scarf, P. A. and J. C. Hartman, “Replacement of Capital Equipment,” Chapter 12 (pp. 287-319) in Complex

Systems Maintenance Handbook, K. A. H. Kobbacy and D. N. P. Murthy (eds.), Springer (Series in Reliability Engineering), Surrey, UK, 2008.

Hartman, J. C., “Supersonic Service?” Case Study 30 (pp. 142-144) in Case Studies for Engineering

Economy (2nd Edition), William Peterson and Ted Eschenbach (eds.), Oxford University Press, New York, 2009.

Hartman, J. C., “Capital Expenditures” section in chapter of “Finance” of Engineering Wide Planning and

Optimization, Air Products and Chemicals, White Paper, Allentown, PA, May, 2003. Hartman, J. C., “Inflation and Price Change in Economic Analysis,” Chapter 92 (pp. 2394-2405) in

Handbook of Industrial Engineering (3rd Edition), Gavriel Salvendy (ed.), John Wiley and Sons, New York, NY, 2001.

Hartman, J. C., “Replacement Analysis with Advanced Technologies: A Traditional Framework,” Chapter

2 (pp. 21-34) in Economic Evaluation of Advanced Technologies: Techniques and Case Studies, Jerome Lavelle, Hampton Liggett and Hamid Parsaei (eds.), Gordon and Breach Publishers, Newark, NJ, 2002.

Hartman, J. C., “Capital Gain,” in Industrial Engineering Applications and Practice: Users' Encyclopedia

(ISBN 0-9654599-0-X), Anil Mital (ed.), International Journal of Industrial Engineering, Cincinnati, Ohio, CD-ROM, 1999.

Hartman, J. C., “Depreciation,” in Industrial Engineering Applications and Practice: Users' Encyclopedia



Hartman, J. C., “Economic Life,” in Industrial Engineering Applications and Practice: Users' Encyclopedia (ISBN 0-9654599-0-X), Anil Mital (ed.), International Journal of Industrial Engineering, Cincinnati, Ohio, CD-ROM, 1999.

Hartman, J. C., “Replacement Analysis,” in Industrial Engineering Applications and Practice: Users'

Encyclopedia (ISBN 0-9654599-0-X), Anil Mital (ed.), International Journal of Industrial Engineering, Cincinnati, Ohio, CD-ROM, 1999.

Hartman, J. C., “Sunk Costs,” in Industrial Engineering Applications and Practice: Users' Encyclopedia


Hartman, J. C., “Unequal Service Lives,” in Industrial Engineering Applications and Practice: Users'

Encyclopedia (ISBN 0-9654599-0-X), Anil Mital (ed.), International Journal of Industrial Engineering, Cincinnati, Ohio, CD-ROM, 1999.

Hartman, J. C., Evaluating Multiple Options in Parallel Replacement Under Demand and Rationing

Constraints, Ph.D. Dissertation, School of Industrial and Systems Engineering, Georgia Institute of Technology, 1996.

REFEREED CONFERENCE PUBLICATIONS:

Hartman, J. C. and J. K. Smith, “Developing an Online Undergraduate Engineering Economy Course,” Proceedings of the 2010 American Society for Engineering Education Conference, (CD-ROM), June, 2010.

Lewis, N., T. Eschenbach and J. C. Hartman, “Funding Decisions for Multi-Stage Projects,” Proceedings of

the 2010 American Society for Engineering Education Conference, (CD-ROM), June, 2010. Lewis, N., T. Eschenbach and J. C. Hartman, “Real Options: Risk-free and Market Interest Rates,”

Proceedings of the American Society for Engineering Management National Conference, October 2009. Lewis, N., T. G. Eschenbach, and J. C. Hartman, “Real Options and the Use of Discrete and Continuous

Interest Rates,” Proceedings of the 2009 American Society for Engineering Education Conference, (CD-ROM), June, 2009.

Buyuktahtakin, I. E. and J. C. Hartman, “Parallel Replacement under Technological Change and

Deterioration,” Proceedings of the Industrial Engineering Research Conference, (CD-ROM), May, 2009. Lewis, N., T. Eschenbach and J. C. Hartman, “Where Real Options Might Really Work,” Proceedings of

the American Society for Engineering Education Zone 1 Conference, April 2009. Lewis, N., T. Eschenbach and J. C. Hartman, “Integrating Real Options with Decision Trees & Simulation:

Uncertainty in the Graduate Engineering Economy Course,” Proceedings of the American Society for Engineering Management National Conference, November, 2008.

Hartman, J. C., “Does Class Size Matter? Reflections on Teaching Engineering Economy to Small and

Large Classes,” Proceedings of the 2008 American Society for Engineering Education Conference, (CD-ROM), June, 2008.

Lewis, N., T. G. Eschenbach, and J. C. Hartman, “Waiting Costs for Real Engineering Projects Evaluated

with Real Options,” Proceedings of the Industrial Engineering Research Conference, (CD-ROM), May, 2008.


Hartman, J. C. and G. L. Tonkay, “Designing Tracks for Industrial and Systems Engineering Majors,” Proceedings of the 2007 American Society for Engineering Education Conference, (CD-ROM), June, 2007.

Hartman, J. C. and D. Enke, “Financial Engineering: The Savior or End of Engineering Economy,”

Proceedings of the 2007 American Society for Engineering Education Conference, (CD-ROM), June, 2007. Lewis, N., T. G. Eschenbach, and J. C. Hartman, “Sensitivity Analysis of a Real Options Problem,”

Proceedings of the Industrial Engineering Research Conference, (CD-ROM), May, 2007. Baker, E., T. G. Eschenbach, J. C. Hartman, and M. Henrie, “Real Options and Real Engineering Projects,”

Proceedings of the 27th Annual American Society for Engineering Management Conference, October, 2006. Hartman, J. C., “Testing the ‘Art’ of Engineering Economic Decision Making,” Proceedings of the 2006

American Society for Engineering Education Conference, (CD-ROM), June, 2006. Hartman, J. C. and M. J. Russo, “Using ‘Real World’ Problems in Engineering Economy,” Proceedings of

the 2005 American Society for Engineering Education Conference, (CD-ROM), June, 2005. Rogers, J. L., and J. C. Hartman, “Replacement Analysis under Continuous and Probabilistic Discontinuous

Technological Change,” Proceedings of the 14th Industrial Engineering Research Conference, Atlanta, GA, May, 2005.

Rogers, J. L., and J. C. Hartman, “Equipment Replacement with Continuous Technological Change and

Uncertain Breakthroughs,” Proceedings of the 13th Industrial Engineering Research Conference, Houston, TX, May, 2004.

Jack, N., D. N. P. Murthy and J. C. Hartman, “A Consumer’s Optimal Strategy for Purchasing Extended

Warranties,” Proceedings of the IMA International Conference on Modeling in Industrial Maintenance and Reliability, Manchester, United Kingdom, April, 2004.

Rogers, J. L., and J. C. Hartman, “An Economic Replacement Model with Continuous Technological

Change and Random Breakthroughs,” Proceedings of the IMA International Conference on Modeling in Industrial Maintenance and Reliability, Manchester, United Kingdom, April, 2004.

Hartman, J. C., “Solving Replacement Problems with Heterogeneous Assets,” (extended abstract)

Proceedings of the 12th Industrial Engineering Research Conference, Portland, OR, May, 2003. Hartman, J. C., “A Supplemental Resource for Teaching Engineering Economy,” Proceedings of the 2002

American Society for Engineering Education Conference, (CD-ROM), June, 2002. Hartman, J. C. and M. Clarke, “Integrated Production Planning and Parallel Replacement Analysis,”

Proceedings of the 11th Industrial Engineering Research Conference, (CD-ROM), May, 2002. Hartman, J. C. and J. Ban, “Modeling a Series-Parallel Replacement Problem,” Proceedings of the 11th

International Conference on Flexible Automation and Intelligent Manufacturing Conference, pp. 563-571, July, 2001.

Hartman, J. C., J. Lavelle, R. Martinazzi, H. Nachtmann, K. Needy and P. Shull, “A Decision Tool for

Developing a Course in Engineering Economy,” Proceedings of the 2001 American Society for Engineering Education Conference, (CD-ROM), June, 2001.


Plebani, L. J. and J. C Hartman, “Using the Internet to Support Active Learning,” Proceedings of the 2001 American Society for Engineering Education Conference, (CD-ROM), June, 2001.

Hartman, J. C. and A. Jha, “Multiple Asset Replacement and Utilization Decisions under Uncertain

Demand,” Proceedings of the 10th Industrial Engineering Research Conference, (CD-ROM), May, 2001. Hartman, J. C. and M. V. Galati, “A Revised Business Game for Use in Teaching Engineering Economy or

Operations Management,” Proceedings of the 2000 American Society for Engineering Education Conference, (CD-ROM), June, 2000.

Plebani, L. J. and J. C Hartman, “Using the Internet to Support Problem Based Learning,” Proceedings of

the 2000 American Society for Engineering Education Conference, (CD-ROM), June, 2000. Hartman, J. C., R. Martinazzi, P. Shull and J. Lavelle, “Developing an Introductory Course in Engineering

Economy: A Resource for IE's and Non-IE's,” Proceedings of the 1999 American Society for Engineering Education Conference, (CD-ROM), June, 1999.

Hartman, J. C. and J. A. Dearden, “Equipment Replacement under Environmental Regulation,”

Proceedings of the 8th Industrial Engineering Research Conference (CD-ROM) May, 1999. Appello, A. L. and J. C. Hartman, “Multiple Machine Investment and Replacement in a Dynamic

Environment,” Proceedings of the 8th Industrial Engineering Research Conference (CD-ROM) May, 1999. Appello, A. L., J. C. Hartman and L. A. Martin-Vega, “Analyzing Investments in Semiconductor Expansion

using System Dynamics,” Proceedings of the 1999 International Conference on Semiconductor Manufacturing Operational Modeling and Simulation, pp. 171-175, January, 1999.

Hartman, J. C., “Engineering Economy: Suggestions to Update a Stagnant Course Curriculum,”

Proceedings of the 1998 American Society for Engineering Education Conference (CD-ROM), June, 1998. Hartman, J. C., “Equipment Replacement under Uncertain Utilization,” Proceedings of the 7th Industrial

Engineering Research Conference (CD-ROM), May, 1998. Hartman, J. C., “Modeling Economies of Scale in Parallel Replacement Analysis,” Proceedings of the 6th

Industrial Engineering Research Conference, pp. 789-794, May, 1997. Hartman, J. C. and J. R. Lohmann, “An Efficient Model for Large Parallel Replacement Problems,”

Proceedings of the 5th Industrial Engineering Research Conference, pp. 775-780, May, 1996. Thuesen, G. J., J. C. Hartman, W. G. Sullivan, W. Walker, A. P. Nyaluke, Y. N. Yang, H. R. Leep, H. R.

Parsaei, T. A. Weigel, J. T. Luxhoj and C. S. Park, “Integration of Economics with Engineering Design: Statistical Analysis and Findings,” Proceedings of the 5th Industrial Engineering Research Conference, pp. 799-802, May, 1996.

Thuesen, G. J., J. C. Hartman, W. G. Sullivan, W. Walker, A. P. Nyaluke, Y. N. Yang, H. R. Leep, H. R.

Parsaei, T. A. Weigel, J. T. Luxhoj and C. S. Park, “Evaluating Students’ Performance in a New Course Sequence with Economic and Design Principles in the Undergraduate Engineering Curriculum,” Proceedings of the 1996 American Society for Engineering Education Conference, June, 1996.

Hartman, J. C. and J. R. Lohmann, “Replace and Rebuild Options in Parallel Replacement Analysis,”

Proceedings of the 4th Industrial Engineering Research Conference, pp. 591-596, May, 1995.


INVITED PRESENTATIONS:

Hartman, J. C., I. E. Buyuktahtakin and J. C. Smith, “Integrating Dynamic Programming into Mixed-Integer Programming Techniques,” Industrial and Systems Engineering Seminar Series, Texas A&M University, College Station, TX, September, 2011.

Hartman, J. C., “Research Trends in Engineering Economy,” Industrial Engineering Research Conference,

Reno, NV, June, 2011. Hartman, J. C. and C. H. Tan, “Equipment Replacement under Capital Budgeting Constraints,” Industrial

Engineering Research Conference, Reno, NV, June, 2011. Hartman, J. C., “Scholarship: Tips for Publishing Success,” 10th Annual IIE New Faculty Colloquium,

Reno, NV, June, 2011. Hartman, J. C, M. B. Kurz and J. Yates, “The Academic Search Process,” 10th Annual IIE Doctoral

Colloquium, Reno, NV, June, 2011. Donnelly, A., M. Law, A. Kwolek-Folland, A. Dorsey, J. C. Hartman, “Recruitment, Retention and

Mentoring: Getting and Keeping the Best Faculty,” Alliance for the Advancement of Florida’s Academic Women in Chemistry and Engineering (NSF Sponsored) Workshop, University of Florida, Gainesville, FL, November, 2010.

Hartman, J. C., I. E. Buyuktahtakin and J. C. Smith, “Integrating Dynamic Programming into Mixed-

Integer Programming Techniques,” Industrial Engineering and Management Science Department Seminar Series, Northwestern University, Evanston, IL, October, 2010.

Hartman, J. C., “Scholarship: Tips for Publishing Success,” 9th Annual IIE New Faculty Colloquium,

Cancun, Mexico, June, 2010. Hartman, J. C, M. B. Kurz and J. Yates, “The Academic Search Process,” 9th Annual IIE Doctoral

Colloquium, Cancun, Mexico, June, 2010. Hartman, J. C., I. E. Buyuktahtakin and J. C. Smith, “Integrating Dynamic and Mixed-Integer Programming

Techniques with an Application in Capacitated Lot Sizing,” Industrial and Operations Engineering Department Seminar Series, University of Michigan, Ann Arbor, MI, March, 2010.

Hartman, J. C., P. Keles, P. and J. Kloeber, “R&D Portfolio Investment Analysis with Approximate

Dynamic Programming,” INFORMS, San Diego, CA, October, 2009. Hartman, J. C. and K. Laksana, “Designing and Pricing Menus of Warranty Contracts; Defining Financial

Engineering,” Graduate Seminar Series, Department of Industrial and Enterprise Systems Engineering, University of Illinois, Urbana-Champaign, IL, October, 2009.

Hartman, J. C., “Engineering Education: A Building Block for Success,” Engineer in Residence Seminar

Series, Department of Industrial and Enterprise Systems Engineering, University of Illinois, Urbana-Champaign, IL, October, 2009.

Hartman, J. C. and K. Laksana, “Designing and Pricing Menus of Warranty Contracts,” INFORMS Student

Chapter Seminar Series, Department of Industrial and Management Systems Engineering, University of South Florida, Tampa, FL, October, 2009.


Hartman, J. C., “Scholarship: Tips for Publishing Success,” 8th Annual IIE New Faculty Colloquium, Miami, FL, May, 2009.

Hartman, J. C, M. B. Kurz, and M. Agnew, “The Academic Search Process,” 8th Annual IIE Doctoral

Colloquium, Miami, FL, May, 2009. Hartman, J. C., “Equipment Replacement under Uncertainties,” Department of Mechanical Engineering

Lecture Series, University of Minnesota, Minneapolis, MN, December, 2008. Hartman, J. C., “Equipment Replacement under Uncertainties,” Dell-ORIE Lecture Series, Department of

Mechanical Engineering, Program in Operations Research and Industrial Engineering, University of Texas, Austin, TX, November, 2008.

Donohue, K. and J. C. Hartman, “How Do I Get the Job I Want,” INFORMS Future Academician

Colloquium, Washington, DC, October, 2008. Buyuktahtakin, I. E., J. C. Hartman and J. C. Smith “Solving IPs using information from DPs,” INFORMS

Annual Conference, Washington, DC, October, 2008. Hartman, J. C., “Equipment Replacement under Uncertainties,” Scott T. Poage Distinguished Lecture

Series, Department of Industrial Engineering, University of Houston, Houston, TX, September, 2008. Hartman, J. C., “Decisions with Options in Time,” SAVE Conference, Reno, NV, June, 2008. Lewis, N., T. G. Eschenbach, and J. C. Hartman, “Waiting Costs for Real Engineering Projects Evaluated

with Real Options,” 17th Industrial Engineering Research Conference, Vancouver, BC, Canada, May, 2008. Nagi, R., M. B. Kurz, and J. C. Hartman, “The Academic Search Process,” 7th Annual IIE Doctoral

Colloquium, Vancouver, BC, Canada, May, 2008. Hartman, J. C., “Scholarship,” 7th Annual IIE New Faculty Colloquium, Vancouver, BC, Canada, May,

2008. Keles, P. and J. C. Hartman, “An Approximate DP Approach for Large Scale R&D Investment Analysis,”

INFORMS, San Juan, Puerto Rico, July, 2007. Hartman, J. C. and L. Dipsingh, “Hospital Equipment Replacement,” 16th Industrial Engineering Research

Conference, Nashville, TN, May, 2007. Hartman, J. C., “Building a Publication Record,” 6th Annual IIE New Faculty Colloquium Panel

Discussion, Nashville, TN, May, 2007. Yano, C., J. C. Hartman and R. Meller, “Publishing Panel,” 6th Annual IIE Doctoral Colloquium Panel

Discussion, Nashville, TN, May, 2007. Hartman, J. C. and P. Keles, “An Approximate DP Approach for Making R&D Investment Decisions,”

Industrial and Systems Engineering Seminar, University of Southern California, Los Angeles, CA, March, 2007.

Hartman, J. C., “Keeping Close to IIE,” Institute of Industrial Engineers Region 7 Student Conference,

California Polytechnic Institute, Pomona, CA, March, 2007.


Hartman, J. C. and P. Keles, “An Approximate DP Approach for Making R&D Investment Decisions,” Industrial Engineering Research Seminar, University at Buffao (SUNY), Buffalo, NY, February, 2007.

Hartman, J. C. and P. Keles, “An Approximate DP Approach for Making R&D Investment Decisions,”

Industrial and Systems Engineering Research Seminar, University of Florida, Gainesville, FL, January, 2007.

Hartman, J. C. and O. Akus, “Integrated Equipment Utilization and Replacement,” Industrial Engineering

Research Seminar, Mississippi State University, Starkville, Mississippi, November, 2006. Hartman, J. C., “Industrial Engineering: Past, Present and Future Perspectives,” 14th Annual Latin

American Industrial Engineering Students Congress, Quito, Ecuador, November, 2006. Hartman, J. C. and P. Keles, “Solving an R&D Investment Problem with Approximate Dynamic

Programming,” Universidad de los Andes, Industrial Engineering Research Seminar Series, Bogota, Colombia, October, 2006.

Hartman, J. C. and P. Keles, “Solving an R&D Investment Problem with Approximate Dynamic

Programming,” EURO INFORMS Annual Conference, Reykjavik, Iceland, July, 2006. Hartman, J. C. and K. Laksana, “Designing and Pricing a Menu of Extended Warranty Contracts,” 15th

Industrial Engineering Research Conference, Orlando, FL, May, 2006. Yano, C., J. C. Hartman and R. Meller, “Publishing Panel,” 5th Annual IIE Doctoral Colloquium Panel

Discussion, Orlando, FL, May, 2006. Hartman, J. C. and K. Laksana, “Designing and Pricing a Menu of Extended Warranty Contracts,”

Industrial Engineering Spring Seminar Series, Auburn University, Auburn, AL, February, 2006. Hartman, J. C. and K. Laksana, “Designing and Pricing a Menu of Extended Warranty Contracts,”

Industrial Engineering Spring Seminar Series, University of Oklahoma, Norman, OK, February, 2006. Hartman, J. C. and K. Laksana, “Designing and Pricing Extended Warranty Contracts,” Industrial

Engineering Spring Seminar Series, Rutgers, State University of New Jersey, Piscataway, NJ, February, 2006.

Hartman, J. C. and K. Laksana, “Pricing Extended Warranties,” INFORMS Annual Conference, San

Francisco, CA, October, 2005. Perry, T. C. and J .C. Hartman, “Semiconductor Order Selection by Solving a Dynamic Stochastic Multiple

Knapsack Problem,” INFORMS Annual Conference, San Francisco, CA, October, 2005. Hartman, J. C. and T. Perry, “Approximation Approaches to a Dynamic, Stochastic Multi-Knapsack

Problem,” International Federation of Operational Research Societies Triennial Conference, Honolulu, HW, July, 2005.

Rogers, J. L., and J. C. Hartman, “Replacement Analysis under Continuous and Probabilistic Discontinuous

Technological Change,” 14th Industrial Engineering Research Conference, Atlanta, GA, May, 2005. Hartman, J. C. and T. Perry, “Capacity Allocation and Expansion Decisions in an Order Acceptance

Framework,” 14th Industrial Engineering Research Conference, Atlanta, GA, May, 2005.


Hartman, J. C., “Parallel Replacement under Availability and Budgeting Constraints,” National Science Foundation Division of Design, Manufacturing and Service Invited Session on Service, Scottsdale, AZ, January, 2005.

Hartman, J. C., “Modeling and Solving a Dynamic, Stochastic Multi-Knapsack Problem for Allocating

Manufacturing Resources,” University of Arkansas, Department of Industrial Engineering Graduate Seminar Series, December, 2004.

Perella, J., D. Myers, J. C. Hartman, A. Anderson, and M. Paley, “Making Sense of the Global Economy:

Dynamics of International Finance,” Showcasing Academic Excellence Panel, Shine Forever Campaign for Lehigh, Bethlehem, PA, October, 2004.

Hartman, J. C., “An Overview of Dynamic Programming: Modeling and Solution Approaches,”

Computational Optimization Research at Lehigh Seminar Series, Industrial and Systems Engineering, Lehigh University, Bethlehem, PA, October, 2004.

Hartman, J. C., “Scholarly Activity,” 3rd Annual IIE New Faculty Colloquium, Houston, TX, May, 2004. Hartman, J. C., “Activities of an Assistant Professor,” 3rd Annual IIE Doctoral Colloquium, Houston, TX,

May, 2004. Hartman, J. C., “A Potpourri of Sabbatical Research,” Management Science Seminar Series, School of

Management, University of Edinburgh, Edinburgh, Scotland, May, 2004. Hartman, J. C., “Finite Horizon Equipment Replacement Analysis,” School of Management Seminar Series,

University of Edinburgh, Edinburgh, Scotland, February, 2004. Hartman, J. C., “Parallel Replacement Analysis,” Management Science Seminar Series, School of

Management, University of Edinburgh, Edinburgh, Scotland, November, 2003. Hartman, J. C., “Real Options in Capital Investment Analysis,” Air Products and Chemicals Operations

Research Seminar and Roundtable, Allentown, PA, August, 2003. Hartman, J. C., “Scholarly Activity,” 2nd Annual IIE New Faculty Colloquium, Portland, OR, May, 2003. Hartman, J. C., “Solving Replacement Problems with Heterogeneous Assets,” 12th Industrial Engineering

Research Conference, Portland, OR, May, 2003. Hartman, J. C. and S. Mason, “Teaching Panel,” 2nd Annual IIE Doctoral Colloquium Panel Discussion,

Portland, OR, May, 2003. Hartman, J. C., “Asset Management: Expansion, Replacement and Utilization,” Value Chain Research

Center Conference, Lehigh University, Bethlehem, PA, May, 2003. Hartman, J. C., E. Kay, R. Vinci and D. Wills, “Effective Teaching in Engineering: Panel Discussion for

Young Faculty,” Lehigh University, Bethlehem, PA, December, 2002. Hartman, J. C., “Solving Large-Scale Replacement Problems,” Department of Industrial Engineering

Seminar Series, Auburn University, Auburn, AL, November, 2002. Hartman, J. C., “Finite Horizon Equipment Replacement,” International Federation of Operational Research

Societies Triennial Conference, Edinburgh, Scotland, July, 2002.


Hartman, J. C., “Integrated Asset Replacement and Utilization Decisions,” Department of Industrial

Engineering Seminar Series, University of Pittsburgh, Pittsburgh, PA, October, 2001. T. K. Ralphs and J. C. Hartman, “Capacitated Network Routing,” Department of Decision Sciences,

National University of Singapore, August, 2001. Hartman, J. C., “Equipment Replacement under Uncertain Utilization: Single and Multiple Asset Cases,”

CORAS Seminar, School of Accounting, Economics and Management Science, University of Salford, Salford, England, July, 2001.

T. K. Ralphs and J. C. Hartman, “Capacitated Network Routing,” IBM T. J. Watson Research Center,

Yorktown Heights, NY, July, 2001. Cao, J., D. Durham, J. C. Hartman, J. Parker, J. N. DuPont, J. A. Stuart and F. F. Chen, “The NSF

CAREER Award: A Panel Discussion,” NSF Design, Service and Manufacturing Research Conference, Tampa, FL, January, 2001.

Hartman, J. C., “Solving the Parallel Replacement Problem under Economies of Scale,” IMSE Department

Fall Seminar Series, Lehigh University, November, 2000. Hartman, J. C., “Modeling and Solving Parallel Replacement Analysis with Demand and Budgeting

Constraints,” Mathematics and Computer Science Divisional Seminar, Argonne National Laboratory, Argonne, IL, December, 1998.

Park, C. S., T. S. Boucher, J. C. Hartman and A. Locascio, “Taking Engineering Economy to the Next

Level: A Panel Discussion,” 7th Industrial Engineering Research Conference, Banff, Alberta, Canada, May, 1998.

Hartman, J. C., “Replacement Analysis with Uncertain and Variable Asset Utilization,” Industrial

Engineering Spring Seminar Series, Rutgers University, Piscataway, NJ, April, 1998. Hartman, J. C., “Incorporating Asset Utilization into Equipment Replacement Decisions,” IMSE

Department Spring Seminar Series, Lehigh University, Bethlehem, PA, March, 1997. Hartman, J. C., “Parallel Replacement Analysis under Uncertainty,” Air Products and Chemicals

Operations Research Roundtable, Allentown, PA, October, 1996. Hartman, J. C. and J. R. Lohmann, “An Efficient Model for Large Parallel Replacement Problems,” 5th

Industrial Engineering Research Conference, Minneapolis, MN, May, 1996. Hartman, J. C., “Evaluating Multiple Options in Parallel Replacement Analysis: Buy, Lease or Rebuild,”

IMSE Department Spring Seminar Series, Lehigh University, Bethlehem, PA, April, 1996. GUEST LECTURES:

Hartman, J. C., “Engineering Economy Review for the Fundamentals of Engineering Examination,” Tau Beta Pi FE Exam Review Seminar, University of Florida, Gainesville, FL, February, 2012.

Hartman, J. C., “Engineering Economy Review for the Fundamentals of Engineering Examination,” Tau

Beta Pi FE Exam Review Seminar, University of Florida, Gainesville, FL, September, 2011.


Hartman, J. C., I. E. Buyuktahtakin and J. C. Smith, “Integrating Dynamic Programming into Mixed-Integer Programming Techniques, and other stuff!” Department of Industrial and Systems Engineering Fall Lecture Series, University of Florida, Gainesville, FL, September, 2011.

Hartman, J. C., “Peer Standing: Rankings and Research” Alpha Pi Mu Student Chapter Presentation,

Department of Industrial and Systems Engineering, University of Florida, Gainesville, FL, March, 2011. Hartman, J. C., “A Story About Leadership, Decision-Making and Engineering,” Engineers Week Banquet

(Keynote), University of Florida, Gainesville, FL, February, 2011. Hartman, J. C., “Using Your Entire Brain,” Tau Beta Pi Honors and Awards Banquet (Keynote), University

of Florida, Gainesville, FL, December, 2010. Hartman, J. C., “MS or MBA: How Do You Decide?” Alpha Pi Mu Student Chapter Presentation,

Department of Industrial and Systems Engineering, University of Florida, Gainesville, FL, October, 2010. Hartman, J. C., “Making Sequential Decisions Under Uncertainty,” Department of Industrial and Systems

Engineering Fall Lecture Series, University of Florida, Gainesville, FL, September, 2010. Hartman, J. C., “Engineering Economy Review for the Fundamentals of Engineering Examination,” Tau

Beta Pi FE Exam Review Seminar, University of Florida, Gainesville, FL, April, 2010. Hartman, J. C., “My Three Definitions of Financial Engineering,” IIE Student Chapter Presentation,

Department of Industrial and Systems Engineering, University of Florida, Gainesville, FL, October, 2009. Hartman, J. C., “A Potpourri of Research in Sequential Decision Analysis,” Department of Industrial and

Systems Engineering Fall Lecture Series, University of Florida, Gainesville, FL, August, 2009. Hartman, J. C., “Undergraduate Research,” Introduction to Industrial and Systems Engineering, EIN 3103,

Department of Industrial and Systems Engineering, University of Florida, Gainesville, FL, September, 2007.

Hartman, J. C., “The Mechanics of Research,” Operations Research Seminar, IE 431, Department of

Industrial and Systems Engineering, Lehigh University, Bethlehem, PA, September, 2002. Hartman, J. C., “Finding Cuts in Integer Programs,” Discrete Optimization, IE 418, ISE Department,

Lehigh University, Bethlehem, PA, April, 2002. Hartman, J. C., “Common Routing Problems,” Engineering and Logistics Management, IE 496, IMSE

Department, Lehigh University, Bethlehem, PA, March, 2001. Hartman, J. C., “Engineering Economy Review for the Fundamentals of Engineering Examination,” Tau

Beta Pi FE Exam Review Seminar, Lehigh University, Bethlehem, PA, April, 1999. Hartman, J. C., “Engineering Economy Review for the Fundamentals of Engineering Examination,” Tau

Beta Pi FE Exam Review Seminar, Lehigh University, Bethlehem, PA, March, 1998. Hartman, J. C., “An Opinionated Perspective on Research,” Operations Research Seminar, IE 431,

Department of Industrial and Manufacturing Systems Engineering, Lehigh University, Bethlehem, PA, March, 1998.


Hartman, J. C., “Optimization Tools for Equipment Replacement Problems,” CE Planning and Engineering Economics, CE 202, Civil and Environment Engineering Department, Lehigh University, Bethlehem, PA, November, 1997.

Hartman, J. C., “Stochastic vs. Deterministic Equipment Replacement Models,” Operations Research -

Probabilistic Models, IE 221, IMSE Department, Lehigh University, Bethlehem, PA, October, 1997. Hartman, J. C., “Engineering Economy Review for the Fundamentals of Engineering Examination,” Tau

Beta Pi FE Exam Review Seminar, Lehigh University, Bethlehem, PA, March, 1997. Hartman, J. C., “Parallel Replacement Analysis,” Replacement Analysis, ISyE 6626, ISyE Department,

Georgia Institute of Technology, Atlanta, GA, January, 1996.

Documents

Joseph C. Hartman, Ph.D., P.E. - College of Engineering · 2013. 5. 26. · Joseph C. Hartman • 2May, 2012 PROFESSIONAL REGISTRATION: Professional Engineer, (Passed P.E. Exam) State