View
219
Download
0
Embed Size (px)
Citation preview
Jose Chan
FAC Review- Injector Laser Heater Undulator [email protected]
6/16/081
Injector Laser Heater Undulator
Jose Chan
Jose Chan
FAC Review- Injector Laser Heater Undulator [email protected]
6/16/082
Injector Laser-Hearter Undulator
Problems/Issues: Paul E. “Most OTR screens are unusable due to COTR (laser heater should fix this in FY2009)”PRD 1.2-004-r2: “…produces Laudau damping in the bunch compressor chicanes in order to suppress potential micro-bunching instabilities that may be driven by Coherent Synchrotron Radiation (CSR) in the bunch compressors, and Longitudinal Space Charge (LSC) forces in the linac…”Engineer: Richard F. Boyce
Jose Chan
FAC Review- Injector Laser Heater Undulator [email protected]
6/16/083
Laser-Heater System
Jose Chan
FAC Review- Injector Laser Heater Undulator [email protected]
6/16/084
Status
Received and tested four bend magnets, BXHCompleted drawings for the vacuum chamber with OTR bodies and is in MFD
Available in September 2008Prints for the alignment stages are completeUndulator magnets are out for vendor quote
Bids are due back on 6/25/08Undulator design are being finalizedOptical components are on orderStart installation in September 2008
Jose Chan
FAC Review- Injector Laser Heater Undulator [email protected]
6/16/085
Beam
BX magnet
OTR with photo-diodes
9 period adjustable gap undulator
Jose Chan
FAC Review- Injector Laser Heater Undulator [email protected]
6/16/086
Summary
Injector Heater design has started and stopped many timeMore complicated than original thoughtVery tight space requirementMagnets and optical components purchase orders are in purchasing groupFinal design packages are being completedUndulator magnet installation maybe one month late depending on magnetic measurementsExpect to start installation of vacuum chamber in September 2008