Upload
lethien
View
265
Download
6
Embed Size (px)
Citation preview
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Responsible
technical
committee
Protection &General Safety No. of Technical
committee 43
Secretary of
Technical Committee Eng. Asma alazaydeh
# Sector Proposal Process
type*
Start date End date Input Priority Notes
1 Chemical
engineering Specification for safety helmets Preparation 2014
2014 Technical
committee
2 Chemical
engineering
Respiratory protective devices – full
face masks - Requirement, testing,
marking
Preparation 2014 2014 Technical
committee
3 Chemical
engineering
Respiratory protective devices –
half and quarter face masks -
Requirement, testing, marking
Preparation 2014 2014 Technical
committee
4
Chemical
engineering
Personal eye equipment- Sunglasses
and sunglare filters for general use
and filters for for direct observation
of the sun
review 2014 2014
Periodical Review
5
Chemical
engineering
Protective clothing for
protection against chemicals -
Classification, labelling, and
performance requirements
review 2014 2014
Periodical Review
* Process Type: Preparation, review (amendment, withdrawal, or restructuring), or adoption.
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Responsible
technical
committee
Medical Devices No. of Technical
committee 33
Secretary of
Technical Committee Eng. Asma alazaydeh
# Sector Proposal Process
type*
Start date End date Input Priority Notes
1 Chemical
engineering
Hospital equipment - Medical
gloves for single use part 2:
Requirements and testing for
physical properties
Amendment
809-2/2005
2014 2014 Periodical Review
2 Chemical
engineering
Hospital equipment - Medical
gloves for single use part 3:
Requirements and testing for
biological evaluation
Amendment
809-3/2005
2014 2014 Periodical Review
3 Chemical
engineering
Hospital equipment - Medical
gloves for single use part 4:
Requirements and testing for shelf
life determination
Preparation
809-4
2014 2014 Periodical Review
4 Chemical
engineering
Test method to evaluate the
resistance of medical face masks to
penetration by synthetic blood
(horizontal projection of fixed
volum at a known velocity)
Amendment
1753/2006
2014 2014 Periodical Review
5 Chemical
engineering
Non active surgical implants -
General requirements
Amendment 2014 2014 Periodical Review
6 Chemical
engineering
Non-active medical devices -
Absorbent cotton - Requirements
and test methods
Amendment 2014 2014 Periodical Review
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Responsible
technical
committee
Medical Devices No. of Technical
committee 33
Secretary of
Technical Committee Eng. Asma alazaydeh
# Sector Proposal Process
type*
Start date End date Input Priority Notes
7 Chemical
engineering
Test method for evaluating the
bacterial filtration efficiey of
medical face mask using abiological
aerosol of staphylococcus aureus
Amendment 2014 2014 Periodical Review
* Process Type: Preparation, review (amendment, withdrawal, or restructuring), or adoption.
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Responsible
technical
committee
Detergents No. of Technical
committee 19
Secretary of
Technical Committee Eng. Asma alazaydeh
# Sector Proposal Process
type*
Start date End date Input Priority Notes
1 Chemical
engineering
Surface active agents - Detergents -
Determination of cationic-active
matter content Part 1: High-
molecular-mass cationic-active
matter
Amendment
1117-1/2008
2014 2014
Periodical Review
2 Chemical
engineering
Surface active agents - Detergents -
Determination of cationic-active
matter content Part 2 : cationic-
active matter of low molecular
mass (from 200 to 500)
Amendment
1117-2/2008
2014 2014
Periodical Review
3 Chemical
engineering
Detergents - Liquid sodium
hypochlorite
Amendment
299/2000
2014 2014 Periodical Review
4 Chemical
engineering
Detergents - Test methods for
sodiumhypochlorite
Amendment
300/2001
2014 2014 Periodical Review
5 Chemical
engineering
Chemical cleaners - Carpet
cleaning products (all parts)
Review
622/2006
2014 2014 Periodical Review
6 Chemical
engineering
Chemical cleaners - Fabric softener Review
2014 2014 External request
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Responsible
technical
committee
Detergents No. of Technical
committee 19
Secretary of
Technical Committee Eng. Asma alazaydeh
# Sector Proposal Process
type*
Start date End date Input Priority Notes
7 Chemical
engineering
Detergents - Test methods -
Determination of pH of aqueous
solution - Potentiometric method
Review
2014 2014
Periodical Review
8 Chemical
engineering
Detergents - Dry cleaning -
Perchloroethylene
Review
Periodical Review
* Process Type: Preparation, review (amendment, withdrawal, or restructuring), or adoption.
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Eng. Ahlam al
Qudah
Secretary of
Technical Committee 12
No. of
Technical Committee Textiles Technical Committee (TC)
Notes Priority Input Date of
finish
Date of
start Process Proposal Sector #
BS EN
1307:2008
1 Periodic Review 5/2014 9/2012
Amendment
1550:2006
Textiles – Textiles floor
coverings – Classification
of pile carpet
Chemical
engineering 1.
ISO
1766:1999 2
Periodic Review
8/2013 3/2014
Restructuring
526/2000
Textile floor coverings —
Determination of
thickness of pile above
the substrate
Chemical
engineering 2.
BS EN 985
:2001
1
Periodic Review
8/2014 2/2014
Amendment
932/2000 Textile floor coverings — Castor chair
test
Chemical
engineering 3.
ISO 7211-
5/1984
2
Periodic Review
8/2014 5/2014
Restructuring
187/2001 Textiles- Determination
of linear density of yarn
removed from fabrics
Chemical
engineering 4.
1981: 3582 BS
:2001
1
Periodic Review
12/2014 6/2014
Amendment
349/2000 Textiles- Determination
of oils, fats and waxes in
wool
Chemical
engineering 5.
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
ISO
1763:1986
2
Periodic Review
12/2014 7/2014
Restructuring
1394/2000 Textile floor coverings-
Determination of the
number of tufts per unit
area
Chemical
engineering 6.
ISO
7771:1985
2
Periodic Review
12/2014 7/2014
Restructuring
161/2000
Textiles- Determination
of dimensional changes of
fabric induced by cold –
water immersion
Chemical
engineering 7.
ISO 105 –
X06:1994
2
Periodic Review
12/2014 8/2014
Restructuring
419/1998 Textiles-colour fastness
of textiles to soda boiling
Chemical
engineering 8.
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Eng. Ahlam al
Qudah
Secretary of
Technical Committee 18
No. of
Technical Committee Leathers Technical Committee (TC)
Notes Priority Input Date of finish Date of
start Process Proposal Sector #
ISO 2417 :2002
1
Periodic
Review
12/2014 5/2014
Amendment
72-9/2001
Leather – physical
testing methods for
leather
Part 9:
Determination of
absorption of water
Chemical
engineering 1
ISO 2420: 2002
1
Periodic
Review
12/2014 6/2014
Amendment
72-3/2001
Leather – physical
testing methods for
leather
Part 3:
Determination of
apparent density
Chemical
engineering 2
ISO 11641/1993
2
Periodic
Review
12/2014 7/2014
Restructuring 72-8/2001
Leather – physical
testing methods for
leather
Part 8: colour
fastness to
perspiration
Chemical
engineering
3
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Eng. Ahlam al
Qudah
Secretary of
Technical Committee 30
No. of
Technical Committee
Paper
and
board
Technical Committee (TC)
Notes Priority Input Date of finish Date of
start Process Proposal Sector #
ISO 2493-1:2010
1
Periodic
Review 8/2014 5/2014
Review 1555:2003 Paper and board-
Determination of
resistance to bending
Chemical
engineering 1
ISO 187:1990
2
Periodic
Review
7/2014 4/2014
Restructuring
172/2000
Paper and paper
board- standard
atmosphere for
conditioning and
testing and
procedure for
monitoring the
atmosphere and
conditioning of
samples
Chemical
engineering 2
ISO 3035:2011
1
Periodic
Review
12/2014 6/2014
Amendment
1579/2003
Single – faced and
single – wall
corrugated
fiberboard –
Determination of flat
crush resistance
Chemical
engineering
3
ISO 3036:1975
2
Periodic
Review 12/2014 7/2014
Restructuring
1572/2003
Board –
Determination of
Puncture resistance
Chemical
engineering 4
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Eng. Ahlam al
Qudah
Secretary of
Technical Committee 30
No. of
Technical Committee
Paper
and
board
Technical Committee (TC)
Notes Priority Input Date of finish Date of
start Process Proposal Sector #
ISO 186:2002
2
Periodic
Review 12/2014 8/2014
Restructuring
167/2005 Paper and board-
Sampling to
determine average
quality
Chemical
engineering 5
ISO 838:1974
2
Periodic
Review
12/2014 9/2014
Restructuring
169/2000
Paper and paper
board- Holes for
general filing
purposes -
Specifications
Chemical
engineering
6
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Eng. Ahlam al
Qudah
Secretary of
Technical Committee -
No. of
Technical Committee
Specialized
Technical
Committee for
Labeling
Technical Committee
(TC)
Notes Priority Input Date of
finish
Date of
start Process Proposal Sector #
1 Periodic Review 12/2014 5/2014
Amendment
119:2008
Labeling – Labeling of
industrial products
Chemical
engineering 1
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
ANNEX
Eng. Ahlam al
Qudah
Secretary of
Technical Committee 12
No. of
Technical Committee Textiles Technical Committee (TC)
Notes Priority Input Date of
finish
Date of
start Process Proposal Sector #
EN 14215:
2003
Periodic Review
Amendment
1687:2006
Textile-Textile floor
coverings- Classification
of machine-made pile
rugs and Runners
Chemical
engineering 1.
ISO 105-
A01:2010
Periodic Review
Amendment
85/1998 Textiles - colour fastness
of textiles - general
principles of testing
Chemical
engineering 2.
Periodic Review
Amendment
102/2001
Clothes - Socks and
stockings
Chemical
engineering 3.
Periodic Review
Review
414/2001
School uniform - Sizes of
uniforms for school
students
Chemical
engineering 4.
Periodic Review Review
384/2001
School uniforms - Clothes
for schooluniforms Chemical
engineering 5
Periodic Review
Review
280/2001
School uniforms - Cotton
clothes forschool
uniforms
Chemical
engineering 6
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Eng. Ahlam al
Qudah
Secretary of
Technical Committee 12
No. of
Technical Committee Textiles Technical Committee (TC)
Notes Priority Input Date of
finish
Date of
start Process Proposal Sector #
Periodic Review
Review
103/2001
Clothes - Ready made
shirts and pyjamasfor
men - Measurement and
allowed tolerances
Chemical
engineering
7
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Eng. Ahlam al
Qudah
Secretary of
Technical Committee 18
No. of
Technical Committee Leathers Technical Committee (TC)
Notes Priority Input Date of finish Date of
start Process Proposal Sector #
BS EN ISO
6942:2002
Periodic
Review
Amendment
1049/1996
Textiles - Protective
clothing foruse
against heat and
fire - Assessment of
materials when
exposed to asource
of radiant heat
Chemical
engineering 1
EN ISO
139:2005
Periodic
Review
Amendment
75/2000
Textile - Standard
atmospheres for
conditioning and
testing textiles
Chemical
engineering 2
BS 3408/1992
Periodic
Review
Restructuring 494/2005
Textiles -
Determination of
water permeability
resistance of
treated fabrics
(cone test)
Chemical
engineering
3
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Eng. Ahlam al
Qudah
Secretary of
Technical Committee 12
No. of
Technical Committee Textiles
Technical Committee
(TC)
Notes Priority Input Date of
finish
Date of
start Process Proposal Sector #
BS 2087-2/1992
Periodic
Review
Restructuring
495-2/2005
Textiles-Preservative
textile treatments Part2:
Methods of test
Chemical
engineering 1
BS 2087-1/1992
Restructuring
495-1/2006
Textiles-preservative textil
treatments Part
1:specification for
treatments
Chemical
engineering 2
Periodic
Review
Review
157-2/2000
Textiles - Determination of
sizing content in fabrics -
Part 2: Determination of
oils, fats and waxes
incotton
Chemical
engineering 3
BS 4407/2002
Periodic
Review
Amendment
227/1999
Textiles - Quantitative
analysis of fibre mixtures
Chemical
engineering 4
CEN 994:2012
Periodic
Review
Amendment
1391/2000
Textile floor coverings -
Determination of the side
length, squareness and
straightness of tiles
Chemical
engineering 5
ISO 2424:2007
Periodic
Review
1393/2000
Amendment
Textile floor coverings -
Vocabulary
Chemical
engineering
6
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Eng. Ahlam al
Qudah
Secretary of
Technical Committee 12
No. of
Technical Committee Textiles
Technical Committee
(TC)
Notes Priority Input Date of
finish
Date of
start Process Proposal Sector #
CEN 986:2005
Periodic
Review
Amendment
937/2000
Textile floor coverings -
Determination of
dimensional change due to
the effects of varied water
and heat conditions
Chemical
engineering
7
CEN 1470:2008
Periodic
Review
Amendment
1783/2006
Textiles - Textile floor
coverings - Classification
of needled floor coverings
except for needled pile
floor coverings
Chemical
engineering
8
ISO 1957:2000
Periodic
Review
Amendment
576/2000
Textile floor coverings -
Sampling and cutting
specimens for physical
tests
Chemical
engineering 9
ISO 1765:1999
Periodic
Review
Restructuring
577/2000
Machine-made textile floor
coverings -Determination
of thickness
Chemical
engineering 10
ISO 8543:1998
Periodic
Review
Restructuring
578/2000
Textile floor covering -
methods for determination
of mass
Chemical
engineering 11
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Eng. Ahlam al
Qudah
Secretary of
Technical Committee 12
No. of
Technical Committee Textiles
Technical Committee
(TC)
Notes Priority Input Date of
finish
Date of
start Process Proposal Sector #
CEN 1813: 1998
Periodic Review
Restructuring
1390/2000
Textile floor coverings -
Determination of wool
fiber integrity using an
abrasion machine
Chemical
engineering 12
CEN 1815: 1998
Periodic Review
Restructuring
1389/2000
Textile floor coverings -
Assessment of static
electrical propensity
Chemical
engineering 13
BS EN
1269:1997+A1:2007
Periodic Review
Restructuring
1388/2000
Textile floor coverings -
Assessment of
impregnations in needled
floor coverings by means
of a soiling test
Chemical
engineering 14
CEN 1814:2005
Periodic Review
Amendment
1386/2000
Textile floor coverings -
Determinationof
resistance to damage of
cut edges using the
modified
Vettermanndrum test
Chemical
engineering
15
CEN 434:1994
Periodic Review
Restructuring
1387/2000
Textile floor coverings -
Determination of
dimensional stability and
curling after exposure to
heat
Chemical
engineering
16
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Eng. Ahlam al
Qudah
Secretary of
Technical Committee 12
No. of
Technical Committee Textiles
Technical Committee
(TC)
Notes Priority Input Date of
finish
Date of
start Process Proposal Sector #
ISO 2094:1999
Periodic Review
Restructuring
592/2000
Textile floor coverings -
Determination of
thickness loss under
dynamic loading
Chemical
engineering 17
ISO 2307:2005
Periodic Review
Amendment
685/2005
Fiber ropes -
Determination of certain
physical and mechanical
properties
Chemical
engineering 18
BS EN1963:2007
Periodic Review
Amendment
770/2000 Textile floor coverings -
Determination of the wear
of textile floor coverings
Chemical
engineering
19
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Eng. Ahlam al Qudah Secretary of
Technical Committee 12
No. of
Technical Committee Textiles
Technical Committee
(TC)
Notes Priority Input Date of finish Date of
start Process Proposal Sector #
ASTM 5417:2000
Periodic
Review
Amendment
826/2000
Textile floor
coverings -
Standard practice
for operation of the
Vettermann drum
tester
Chemical
engineering 20
ISO 3415;1986
Periodic
Review
Restructuring
834/2000
Textile floor
coverings -
Determination of
thickness loss after
brief, moderate
static loading
Chemical
engineering 21
CEN 1471:1997
Periodic
Review
Restructuring
923/2000
Textile floor
coverings -
Assessment of
change in
appearance of
textile floor
coverings
Chemical
engineering
22
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Eng. Ahlam al
Qudah
Secretary of
Technical Committee 12
No. of
Technical Committee Textiles
Technical Committee
(TC)
Notes Priority Input Date of
finish
Date of
start Process Proposal Sector #
ISO 8388:1998
Periodic Review
Restructuring
101-1/2000
Textiles - Definitions of
general terms and basic
weaves - Part 1:
Definitions related to
knitted fabrics
Chemical
engineering 23
CEN 1815: 1998
Periodic Review
Amendment
105/2006
Textiles - cotton bedford
cloths
Chemical
engineering 24
BS EN
1269:1997+A1:2007
Periodic Review
Review
157-1/2000
Textiles- determination
of sizing content in
fabrics part 1- the
determination of sizing
content in cellulosic or
synthetic fibers ,yarns
and fabrics or yarns and
fabrics made from
blends of such fibers
Chemical
engineering 25
ISO 1-13934:1999
Periodic Review
Restructuring
1698-1/2005
Textiles - Tensile
properties of fabrics Part
1:Determination of
maximum force and
elongation at maximum
force using the strip
method
Chemical
engineering
26
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Eng. Ahlam al
Qudah
Secretary of
Technical Committee 12
No. of
Technical Committee Textiles
Technical Committee
(TC)
Notes Priority Input Date of
finish
Date of
start Process Proposal Sector #
ISO 2-13934:1999
Periodic Review
Restructuring
1698-2/2005
Textiles - Tensile
properties of fabrics part
2: Determination of
maximum force using
the grab method
Chemical
engineering
27
CEN2-1049:1994
Periodic Review
Restructuring
1699/2005
Textiles-Woven fabrics-
Construction-Methods of
analysis-Determination
of number of threads per
unit length
Chemical
engineering
28
ISO 22198;2006
Periodic Review
Restructuring
177/2007
Textiles - Fabrics -
Determination of width
and length
Chemical
engineering 29
Periodic Review
Restructuring
187/2001
Textiles - Determination
of lineardensity yarn
removed from fabrics
Chemical
engineering 30
ISO 1-13938 ; 1999
Periodic
Review
Restructuring
230-1/2001
Textiles - Bursting
properties offabrics part
1- Hydraulic method for
determination of
burstingstrength and
bursting distension
Chemical
engineering 31
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Eng. Ahlam al
Qudah
Secretary of
Technical Committee 12
No. of
Technical Committee Textiles
Technical Committee
(TC)
Notes Priority Input Date of
finish
Date of
start Process Proposal Sector #
ISO 2-13938 ; 1999
Periodic
Review
Restructuring
230-2/2001 Textiles - Bursting
properties offabrics
part2- Pneumatic
method for
determination of
burstingstrength and
bursting distension
Chemical
engineering 32
ISO 9801:1997
Periodic
Review
Restructuring
282/2000
Textiles - Determination
of mass of fabrics
Chemical
engineering 33
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Eng. Ahlam al
Qudah
Secretary of
Technical Committee 12
No. of
Technical Committee Textiles
Technical Committee
(TC)
Notes Priority Input Date of
finish
Date of
start Process Proposal Sector #
BS 3449:1990
Periodic Review
Restructuring
348/2000
Textiles - Method for
determination of
resistance of fabrics to
water absorption
Chemical
engineering 34
Periodic Review
Review
350/2000
Textile - Determination of
dimensional changes of
wool-containing fabrics
during washing
Chemical
engineering 35
BS 1771-2:1990
Periodic Review
Restructuring
779/2005
Textiles - Fabrics for
uniforms and workwear -
Specification for fabrics
from cellulosic
fibres,synthetic fibres and
blends
Chemical
engineering 36
Periodic Review
Amendment
78/1979
Textiles - Standard
methods for sampling of
wool products
Chemical
engineering 37
ISO 1969:2004
ISO 9554:2010
Periodic Review
Amendment
682/2005
Fibre ropes-Polypropylene
(PP) ropes-Three,four and
eight-strand ropes
Chemical
engineering 38
ISO 1969:2004
Periodic Review
Restructuring
572/2005
Fibre ropes - Polyethylene
- three and four - strand
ropes
Chemical
engineering 39
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Eng. Ahlam al
Qudah
Secretary of
Technical Committee 12
No. of
Technical Committee Textiles
Technical Committee
(TC)
Notes Priority Input Date of
finish
Date of
start Process Proposal Sector #
BS EN 994:2012
Periodic Review
Preparation Textile floor covering-
Determination of side
length
Chemical
engineering 40
ISO 105-X11:1994
Periodic Review
Restructuring
91/1998
Textiles - Colour fastness
of textiles to hot pressing
Chemical
engineering 41
ISO 105-D07:1993
Periodic Review
Restructuring
912/2007
Textile- Tests for colour
fastness - Colour fastness
to rubbing -Organic
solvents
Chemical
engineering 42
ISO 105-A03:1993
Periodic Review
Restructuring
86-2/2000
Textiles - Tests for colour
fastness -Part 2: Grey
scale for assessing staining
Chemical
engineering 43
ISO 105-A05:1996
Periodic Review
Restructuring
86-1/2000
Textiles - Tests for colour
fastness -Part 1: Grey
scale for assessing change
in colour
Chemical
engineering 44
Periodic Review
Amendment
83/2000
Textiles - Standard
method fordetermination
of correct invoice weight
Chemical
engineering 45
ISO 105 –N01:1993
Periodic Review
Review
415/1998
Textiles - colour fastness
to bleaching with
hypochlorite
Chemical
engineering 46
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Eng. Ahlam al
Qudah
Secretary of
Technical Committee 12
No. of
Technical Committee Textiles
Technical Committee
(TC)
Notes Priority Input Date of
finish
Date of
start Process Proposal Sector #
ISO 8159:1987
Periodic Review
Restructuring
101-2/2000
Textiles - Definitions of
general terms and basic
weaves - Part 2:
Definitions related to
fibers and yarns
Chemical
engineering 47
BS EN 12590:2000
Periodic Review
Amendment
1105/1996
Textiles - Sewing threads
made wholl yor partly
from synthetic fibers
Chemical
engineering 48
BS 10290:1993
Periodic Review
Restructuring
88/2001
Textiles - Specifications of
cottonyarns
Chemical
engineering 49
BS 5815-1/2005
Periodic Review
Restructuring
704/2009
Textiles - Specification for
sheeting - Sheets and
pillows lips
Chemical
engineering 50
ISO 16602/2007
Periodic Review
Restructuring
1899/2009
Protective clothing for
protection against
chemicals - Classification,
labelling, and
performance
requirements
Chemical
engineering
51
ISO 2061/1995
Periodic Review
Restructuring
365/2009
Textiles - Determination
of twist in yarns - Direct
counting method
Chemical
engineering 52
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Eng. Ahlam al Qudah Secretary of
Technical Committee 18
No. of
Technical Committee Leathers Technical Committee (TC)
Notes Priority Input Date of finish Date of
start
Process
Proposal Sector #
ISO 6530/2005
Periodic
Review
Restructuring
607/2007
Protective clothing-
Protection against
liquid chemicals -
Test method for
resistance of
materials to
penetration by
liguids
Chemical
engineering 53
ISO 2060/1994
Periodic
Review
Restructuring
74/2009
Textiles - Yarn
from packages -
Determination of
linear density (mass
per unit length) by
the skein method
Chemical
engineering 54
ISO 3758/2012
Periodic
Review
Amendment
825/2009
Textiles - Care
labelling code using
symbols
Chemical
engineering 55
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Eng. Ahlam al
Qudah
Secretary of
Technical Committee 18
No. of
Technical Committee Leather
Technical Committee
(TC)
Notes Priority Input Date of
finish
Date of
start Process Proposal Sector #
ISO/TR 20880:2007 Periodic Review
Preparation
Footwear- out soles Chemical
engineering 56
Periodic Review
Review
688/2005
Shoes - Lined antistatic
rubber footwear - Test
methods
Chemical
engineering 57
ISO 9407:1991
Periodic Review
Restructuring
467/2006 Shoes - Shoes Sizes
Chemical
engineering 58
Periodic Review
Restructuring
468/2002
Shoes - General
specifications
Chemical
engineering 59
ISO 3380:2002
Periodic Review
Amendment
72-10/2001
Leather - Physical testing
methodsfor leather - Part
10: determination of
shrinkage temperature
Chemical
engineering 60
ISO 3377-2:2002
Periodic Review
Amendment
72-6/2001
Leather - Physical testing
methods forleather - Part
6: Determination of
tearing load
Chemical
engineering 61
ISO 3376:2011
Periodic Review
Amendment
72-5/2001
Leather - Physical testing
methods forleather - Part
5: determination of tensile
strength and elongation
Chemical
engineering 62
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Eng. Ahlam al
Qudah
Secretary of
Technical Committee 18
No. of
Technical Committee Leather
Technical Committee
(TC)
Notes Priority Input Date of
finish
Date of
start Process Proposal Sector #
ISO 4045:2008
Periodic Review
Amendment
106-4/2001
Leather - chemical and
biological tests of leather -
Part 4: Determination of
PH
Chemical
engineering
63
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Eng. Ahlam al Qudah Secretary of
Technical Committee 18
No. of
Technical Committee Leather Technical Committee (TC)
Notes Priority Input Date of finish Date of
start
Process
Proposal Sector #
ISO 2418:2002
Periodic
Review
Amendment
106-2/2001
Leather - Chemical
and biologicaltests
of leather - Part 2:
Laboratory samples
location
andidentification
Chemical
engineering 64
4044:2008
ISO
Periodic
Review
Amendment
106-1/2001
Leather - Chemical
and biologicaltests
of leather - Part 1:
Preparation of
chemical test
samples
Chemical
engineering 65
Periodic
Review
Amendment
106/2001
Leathers - Chemical
and biological
testsof leathers
Chemical
engineering 66
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Eng. Ahlam al
Qudah
Secretary of
Technical Committee 30
No. of
Technical Committee Paper and board
Technical Committee
(TC)
Notes Priority Input Date of
finish
Date
of
start
Process Proposal Sector #
Periodic
Review
Review
168/2000
Paper and paperboard -
Folders and files - Sizes
Chemical
engineering 67
Periodic
Review
Review
171/2007
Correspondence envelopes -
Designation and sizes
Chemical
engineering 68
Periodic
Review
Restructuring
1692/2007 Envelopes, postcards and
similar articles - Cancellation
area
Chemical
engineering 69
ISO 6924:
1983
Periodic
Review
Restructuring
468/2002 Correspondence envelopes -
Vocabulary
Chemical
engineering 70
ISO 2493-
1:2010
Periodic
Review
Preparation
1555-1/2003
Paper and board-
Determination of resistance to
bending- part 1
Chemical
engineering 71
ISO
1974:2012
Periodic
Review
Amendment
1560/2003
paper-determination of tearing
resistance (elmendrof
resistance)
Chemical
engineering 72
ISO 8791-
2:1990
Periodic
Review
Amendment
1551-2/2003
paper and board-
determination of
roughness/smoothness (air leak
method) part2: Bendtsen
method
Chemical
engineering
73
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Eng. Ahlam al
Qudah
Secretary of
Technical Committee 30
No. of
Technical Committee Paper and board
Technical Committee
(TC)
Notes Priority Input Date of
finish
Date
of
start
Process Proposal Sector #
ISO
87913:2005
Periodic
Review
Amendment
1551-3/2003
paper and board-determination
of roughness/smoothness(air
leak methods) part3: sheffield
method
Chemical
engineering 74
ISO
87914:2007
Periodic
Review
Amendment
1551-4/2003
paper and board-determination
of roughness/smoothness(air
leak method) part 4: print-surf
method
Chemical
engineering 75
ISO
5627:1995
Periodic
Review
Review
1557/2003 Paper and board-determination
of smoothness(bekk method)
Chemical
engineering 76
DIN 55468-
1:2008
DIN 55468-
2:2008
Periodic
Review
Amendment
478/2004 Paper and board - Corrugated
fiberboard - Requirements and
testing
Chemical
engineering
77
ISO 5636-
5:2003
Periodic
Review
Restructuring
1565/2003
paper and board-
determination of air
permeance and air resistance
(medium range)-Gurley
method
Chemical
engineering 78
CEN
3037/2007
Periodic
Review
Amendment
1566/2003
Corrugated fiber board-
determination of edge wise
crush(unwaxed edge method )
Chemical
engineering 79
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Eng. Ahlam al
Qudah
Secretary of
Technical Committee 30
No. of
Technical Committee Paper and board
Technical Committee
(TC)
Notes Priority Input Date of
finish
Date
of
start
Process Proposal Sector #
ISO 536:2012
Periodic
Review
Amendment 206/2000
Paper and paperboard -
Determination of grammage
Chemical
engineering 80
Periodic
Review
Review
1577/2003
Paper - White and coloured
paper used in copiers (plain
and xerographic) and laser
printers
Chemical
engineering 81
ISO
5626:1993
Periodic
Review
Restructuring
1580/2003 paper- determination of
folding endurance
Chemical
engineering 82
ISO
2471:2008
Periodic
Review
Amendment
1571/2003
paper and board-
determination of capacity
)paper backing)-diffuse
reflection method
Chemical
engineering 83
ISO 535:1991
Periodic
Review
Restructuring
224/2008
Paper and board -
Determination of water
absorptiveness - Cobb method
Chemical
engineering 84
ISO1-
8791:1986
Periodic
Review
Restructuring
1551-1/2003
Paper and board-
determination of
roughness/smoothness(air leak
methods) part1: general
method
Chemical
engineering
85
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Eng. Ahlam al
Qudah
Secretary of
Technical Committee 30
No. of
Technical Committee Paper and board
Technical Committee
(TC)
Notes Priority Input Date of
finish
Date
of
start
Process Proposal Sector #
CEN
12858/1999
Periodic
Review
Restructuring
950/2009
Paper - printing and business
paper - Requirements for
continuous stationery
Chemical
engineering 86
Egyptian
standard
13/2013
Periodic
Review
Amendment
51/2009 Paper and paperboard -
Writing paper
Chemical
engineering 87
Egyptian
standard
13/2013
Periodic
Review
Amendment
82/2009 Paper and paperboard - Letter
printing paper
Chemical
engineering 88
Egyptian
standard
13/2013
Periodic
Review
Amendment
81/2009 Paper and Paperboard - Offset
printing paper
Chemical
engineering 90
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Responsible
technical
committee
Cosmetics No. of Technical committee (21) Secretary of
Technical Committee Ruba Al-Thawabeia
# Sector Proposal Process type* Start date End date Input Priority Notes
1
Chemical
Engineering
Cosmetics – Microbiology –
Guidelines for the risk assessment
and identification of
microbiologically low – risk
products
Adoption
REPRINT
03/2013 11/2013 Technical
Committee
1
FDJS 2059/2014
(Board of Directors)
2
Chemical
Engineering
Cosmetics - Nail polish
Amendment
JS 1032/1996
05/2013 01/2014 Periodical review
1 FDJS 1141/2014
(Board of Directors)
3
Chemical
Engineering Shampoo - Body shampoo amendment
07/2013 03/2014 Periodical review 1 FDJS 803/2014
(Board of Directors)
4
Chemical
Engineering Cosmetics - Testing methods of
hair shampoo amendment
01/2014 05/2014 Periodical review 1
5
Chemical
Engineering
Cosmetics - Nail polish – Test
methods
amendment 03/2014 08/2014 Periodical review 1
6
Chemical
Engineering
Dentistry - toothpaste -
Requirements, test methods and
marking
amendment 05/2014 01/2015 Periodical review 2
Update of reference
7
Chemical
Engineering Cosmetices - Chemical Depilatories amendment
08/2014 03/2015 3
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Responsible
technical
committee
Fertilizers No. of Technical
committee (3)
Secretary of
Technical Committee Ruba Al-Thawabeia
# Sector Proposal Process type* Start date End date Input Priority Notes
1
Chemical
Engineering
Fertilizers and soil conditioners –
Vocabulary – Part 1: General Terms
Adoption
(Translation) 02/2013 10/2013
Technical
Committee 1
FDJS 2051-1/2014 (Board of Directors)
2
Chemical
Engineering
Fertilizers and soil conditioners – Vocabulary – Part 2: Terms related to fertilizer2
Adoption
(Translation) 04/2013 12/2013
Technical
Committee 1
FDJS 2051-2/2014
(Board of Directors)
3
Chemical
Engineering Fertilizers - Determination of bulkdensity (loose)
Update/reprint 02/2014 08/2014
Periodical review
1
4
Chemical
Engineering Fertilizers - Determination of bulkdensity (tapped)
Update/reprint 04/2014 08/2014
Periodical review
1
Chemical
Engineering Inorganic Fertilizers – requirements for labeling and packaging
Preparation 06/2014 03/2015
Technical
Committee 2
3
Chemical
Engineering Fertilizers and soil conditioners - Potting Soil - Requirements
Preparation 10/2014 06/2014
Plan 2013 3 AS 3743-2003
4
Chemical
Engineering Fertilizers and soil conditioners - Potting Soil – Test methods
Preparation 12/2014 06/2014
Plan 2013 4 AS 3743-2003
* Process Type: Preparation, review (amendment, withdrawal, or restructuring), or adoption.
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
sponsible
technical
committee
Safety and Protection of
Environment No. of Technical committee (39)
Secretary of
Technical Committee Ruba Al-Thawabeia
# Sector Proposal Process type* Start date End date Input Priority Notes
1
Environment Environment-Air quality-Ambient
air quality standards
Amendment 02/2014 08/2014 Plan 2013 1 World bank
standards +EPA+ EU
Directive
2 Environment
Environment-Pollutants-
Maximum allowable limits of air
pollutants emitted from the
stationary sources
Amendment
JS 1140/2006
05/2014 11/2014 Plan 2013 2 World bank standards
+EPA
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Responsible
technical
committee
Fireworks Specialized Technical
Committee
Secretary of
Technical Committee Ruba Al-Thawabeia
# Sector Proposal Process type* Start date End date Input Priority Notes
1
Chemical
Engineering
Pyrotechnic articles - Fireworks,
Categories 1, 2, and 3 - Part 1:
Terminology
Adoption by
Endorsement
notice
10/2012 06/2013 National Security
and protection of
health and safety
1
EN 15947-1-2010
2
Chemical
Engineering
Pyrotechnic articles - Fireworks,
Categories 1, 2, and 3 - Part 2:
Categories and types of firework
Adoption by
Endorsement
notice
03/2013 11/2013 National Security
and protection of
health and safety
1
EN 15947-2-2010
3
Chemical
Engineering
Pyrotechnic articles - Fireworks,
Categories 1, 2, and 3 - Part 3:
Minimum labelling requirements
Adoption by
Endorsement
notice
05/2013 01/2014 National Security
and protection of
health and safety
1 EN 15947-3-2010
4
Chemical
Engineering
Pyrotechnic articles - Fireworks,
Categories 1, 2 and 3 - Part 4:
Test methods
Adoption by
Endorsement
notice
07/2013 03/2014 National Security
and protection of
health and safety
1 EN 15947-4-2010
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Responsible
technical
committee
Fireworks Specialized Technical
Committee
Secretary of
Technical Committee Ruba Al-Thawabeia
# Sector Proposal Process type* Start date End date Input Priority Notes
5
Chemical
Engineering
Pyrotechnic articles - Fireworks,
Categories 1, 2, and 3 - Part 5:
Requirements for construction and
performance
Adoption by
Endorsement
notice
09/2013 05/2014 National Security
and protection of
health and safety
1 EN 15947-5-2010
5 Chemical
Engineering
Technical Regulation on Safety of
Fireworks Preparation
05/2014 12/2014 National Security
and protection of
health and safety
1
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Responsible
technical
committee
Safety of Toys Secretary of
Technical Committee Ruba Al-Thawabeia
# Sector Proposal Process type* Start date End date Input Priority Notes
1
Chemical
Engineering
Safety of toys - Part 1: Mechanical
and physical properties
Update
Adoption by
Endorsement
notice
10/2013 05/2014 Protection of
health and safety
1
EN 15947-1-2010
2
Chemical
Engineering
Safety of toys - Part 3: Migration of
certain elements
Update
Adoption by
Endorsement
notice
10/2013 05/2014 Protection of
health and safety
1
EN 15947-2-2010
3
Chemical
Engineering
Safety of toys - Part 4:
Experimental sets for chemistry
and related activities
Update
Adoption by
Endorsement
notice
10/2013 05/2014 Protection of
health and safety
1 EN 15947-3-2010
4
Chemical
Engineering
Safety of toys - Part 5: Chemical
toys (sets) other than experimental
sets
Update
Adoption by
Endorsement
notice
10/2013 05/2014 Protection of
health and safety
1 EN 15947-4-2010
5
Chemical
Engineering
Safety of toys - Part 9: Organic
chemical compounds -
Requirements
Adoption by
Endorsement
notice
10/2013 05/2014 Protection of
health and safety
1 EN 71-
9:2005+A1:2007
(First Edition)
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Responsible
technical
committee
Safety of Toys Secretary of
Technical Committee Ruba Al-Thawabeia
# Sector Proposal Process type* Start date End date Input Priority Notes
6 Chemical
Engineering
Safety of toys - Part 10: Organic
chemical compounds - Sample
preparation and extraction
Adoption by
Endorsement
notice
10/2013 05/2014 Protection of
health and safety
1 EN 71-10:2005
(First Edition)
7 Safety of toys - Part 11: Organic
chemical compounds - Methods
of analysis
Adoption by
Endorsement
notice
10/2013 05/2014 Protection of
health and safety
EN 71-11:2005
(First Edition)
8 Safety of toys - Part 12: N-
Nitrosamines and N-nitrosatable
substances
Adoption by
Endorsement
notice
10/2013 05/2014 Protection of
health and safety
EN 71-12:2013
(First Edition)
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Responsible
technical
committee
Environment
Friendly
Construction
Products
No. of Technical
committee (58)
Secretary of
Technical Committee Eng. Majd Shatnawi
# Sector Proposal Process
type*
Start
date
End
date Input Priority Notes
1 Construction
Environment
Friendly
Construction
Products – Water
saving Equipment
Preparation 2013 1-4-
2014
external
request 1 DJS until 31/12/2013
2 Construction
Environment
Friendly
Construction
Products - Cement
Preparation 1-4-
2014
1-7-
2014
Stakeholder
external
request 1
- The Australian Ecolabel Program (Good Environmental Choice Australia Standard):
1- GECA 08-2007: Environmentally Innovative Products 2- GECA 23-2005: Architectural and Protective Coatings
- Environment Protection Administration Government of
the Republic of China "Portland Blast Furnace Cement"
3 Construction
Environment
Friendly
Construction
Products - Blocks
for Architecture
Preparation 1-3-
2014
1-8-
2014
Stakeholder
external
request 2
- China Environmental United Certification Center "HBC 20
-2003 Blocks for Architecture"
4 Construction
Environment
Friendly
Construction
Products - Steel for
Use in
Construction
Products
Preparation 1-6-
2014
1-10-
2014
Stakeholder
external
request 2
- Canada's Environmental Choice Program : CCD-150
Product: Steel for Use in Construction Products.
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Responsible
technical
committee
Environment
Friendly
Construction
Products
No. of Technical
committee (58)
Secretary of
Technical Committee Eng. Majd Shatnawi
# Sector Proposal Process
type*
Start
date
End
date Input Priority Notes
5 Construction
Environment
Friendly
Construction
Products – flexible
floor coverings
Preparation 1-7-
2014
1-11-
2014
Stakeholder
external
request 3
- Canada's Environmental Choice Program :CCD-152: Flooring Products
- Germany Blue Angel eco-label: RAL-UZ 120 February 2011: Resilient Floor Coverings
6 Construction
Environment
Friendly
Construction
Products – Solid
floor coverings
Preparation 1-8-
2014
1-12-
2014
Stakeholder
external
request 3
- Canada's Environmental Choice Program :CCD-152: Flooring Products
- Canada's Environmental Choice Program CCD-167: Product: Mosaic Tiles
Nordic Ecolabelling of Floor coverings
7 Construction
Environment
Friendly
Construction
Products - Gypsum
Wallboard
Preparation 1-9-
2014
31-12-
2014
Stakeholder
external
request 4
- Canada's Environmental Choice Program: CCD-020
Gypsum Wallboard
* Process Type: Preparation, review (amendment, withdrawal, or restructuring), or adoption.
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Responsible
technical
committee
No. of Technical committee (44) Secretary of
Technical Committee Eng. Majd Shatnawi
# Sector Proposal Process
type*
Start date End date Input Priority Notes
1 Construction Pre-rinse spray valves preparation 2013 4/2014 Survey 2010 1
WD
ASTM F2324,
ASME A 112.18.1
2 Construction Sanitary ware - Sanitary ware made
from glazed cast iron Amendment
23/1977 2/2014 6/2014 Periodical review
1
Upon the availability
of references:
1- Indian Standard
772
2- Egyptian Standard
632/2005
3- Egyptian standard
618/2005
3 Construction Sanitary ware - Flake graphite cast
iron
amendment
1205/1998 4/2014 8/2014 Periodical review
1 BS EN 1561:2011
4 Construction Sanitary ware - Baths made form
porcelain enameled cast iron Amendment
1206/1998 6/2014 10/2014 Periodical review
1 BS EN 232:2012
5 Construction Sanitary ware - Baths made form
vitreous enameled sheet steel Restructuring
1207/1998 8/2014 11/2014 Periodical review
1
BS 1390:1990
6 Construction Sanitary installation - Bath for
domestic purposes made of acrylic material - Connecting dimensions
Restructuring
1209/1999 8/2014 11/2014 Periodical review
1 BS 4305-2:1989
7 Construction
Sanitary installation - Bath for domestic purposes made of acrylic material - Specification for finished
baths
Amendment
1208/1999 9/2014 12/2014 Periodical review
1
BS EN 198:2008
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Responsible
technical
committee
No. of Technical committee (44) Secretary of
Technical Committee Eng. Majd Shatnawi
# Sector Proposal Process
type*
Start date End date Input Priority Notes
8 Construction Sanitary ware - Crosslinked cast
acrylic sheets for baths and shower trays for domestic purposes.
Amendment
1128/2003 11/2014 Periodical review
1 BS EN 263:2008
* Process Type: Preparation, review (amendment, withdrawal, or restructuring), or adoption.
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Responsible
technical
committee
Insulating materials No. of Technical
committee (1)
Secretary of
Technical Committee Zainab AL-amawi
# Sector Proposal Process
type*
Start date End date Input Priority Notes
1
Chemical
Engineering
Insulating materials – Asphalt –
Asphalt roof cement
Review
730-2006 3/2013 31/3/2014
Questionnaire
2012 1
DJS 730:2013
2
Chemical
Engineering
Insulating materials – Asphalt
primer used in roofing,
dampproofing
and waterproofing
Review
684/2005 3/2013 31/3/2014
Questionnaire
2012 1
DJS 684:2013
3
Chemical
Engineering
Insulating materials – Mineral fiber
blanket thermal insulation for
commercial
and industrial applications
Review
855/2008 1/1/2014 31/12/2014
Questionnaire
2013 2 ASTM D 553-2013
4 Chemical
Engineering Insulating materials - Mineral wool
-Loose fill thermal insulation
Review
895/1992
1/1/2014 31/12/2014
Questionnaire
2013
1 ASTM C 687-2007
5 Chemical
Engineering
Insulating materials-Specifications
for pressure-sensitive adhesive tapes
for electrical purposes Part2:
Methods of test
Review
416-2/2005 1/1/2014 31/12/2014
Questionnaire
2013 2 Reference withdrawn
6 Chemical
Engineering
Insulating materials-Asphalt coated
glass-fiber venting base sheet used
in roofing
Review
1330/2006 1/1/2014 31/12/2014
Questionnaire
2013 3
ASTM D 4897/
D48987M-01
(2009)
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Responsible
technical
committee
Insulating materials No. of Technical
committee (1)
Secretary of
Technical Committee Zainab AL-amawi
# Sector Proposal Process
type*
Start date End date Input Priority Notes
7 Chemical
Engineering
Insulating materials – Standard
requirement of concrete surfaces for
adhered membrane water proofing
systems
Review
1274/2001 1/1/2014 31/12/2014
Questionnaire
2013 3
ASTM D 5295-00
(2006)
8 Chemical
Engineering
Insulating materials - Perlite thermal
insulation boards
Review
817/2009 1/1/2014 31/12/2014
Questionnaire
2013 4 ASTM C 549-2012
9 Chemical
Engineering
Insulating materials - Perlite - Loose
fill insulation
Review
818/2009 1/1/2014 31/12/2014
Questionnaire
2013 5 ASTM C 728-
13:201
* Process Type: Preparation, review (amendment, withdrawal, or restructuring), or adoption.
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
ANNEX
Responsible
technical
committee
Insulating materials No. of Technical
committee (1)
Secretary of
Technical Committee Zainab AL-amawi
# Sector Proposal Process
type*
Start date End date Input Priority Notes
1
Chemical
Engineering
Insulating materials - Mineral fiber
pipe insulation
Review
611/2009 1/1/2014 31/12/2014
Questionnaire
2013 1
ASTM C 547/2012
2
Chemical
Engineering
Insulating materials - Mineral fiber
block and board Thermal insulation
Review
605/2009
1/1/2014
605/2009 31/12/2014
Questionnaire
2013 2
ASTM C 612-10/2009
3
Chemical
Engineering
Insulating materials - Mineral fiber
pipe insulation
Review
611/2009 1/1/2014 31/12/2014
Questionnaire
2013 3 ASTM C 547/2012
* Process Type: Preparation, review (amendment, withdrawal, or restructuring), or adoption.
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Responsible
technical
committee
Paint and varnish No. of Technical committee (14) Secretary of
Technical Committee Zainab AL-amawi
# Sector Proposal Process type* Start date End date Input Priority Notes
1
Chemical
Engineering Paints and varnishes - Road
marking paints
Review
545/2005 1/1/2014 31/12/2014
Questionnaire
2013
1
SASMO
2801/2003
2
Chemical
Engineering
Paints and varnishes - Extenders for
paints - Specifications and methods
of test - Part 10: Natural talc
Amendment
433-10/2001 1/1/2014 31/12/2014
chamber of
industry request
3 ISO 3262/2000
3
Chemical
Engineering
Paint and varnish – Water paints
(emulsion)
Review
31/2010 1/1/2014 31/12/2014
Questionnaire
2013
4 SASO
470/2002
4
Chemical
Engineering
Paints and varnishes - Standard test
methods for water paints
(emulsion)
Review
16/2010 1/1/2014 31/12/2014
Questionnaire
2013
5 ASTM 2486
5
Chemical
Engineering
Ochnto
Paints
preparation 1/1/2014 31/12/2014
Certificates of
conformity
2 No reference
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
ANNEX
Responsible
technical
committee
Paint and varnish No. of Technical committee Specialist
committee
Secretary of
Technical Committee Zainab AL-amawi
# Sector Proposal Process type* Start date End date Input Priority Notes
1
Chemical
Engineering
Paints and Varnishes - Priming oil
paints
Amendment
253/2003 1/1/2014 31/12/2014
Questionnaire
2013
1 NO REFERENCES
2 Chemical
Engineering
Paint and varnish - Air drying gloss
paints for general purposes
Review
244/2010 1/1/2014 31/12/2014
Questionnaire
2013
2 SASO
470/2002
3 Chemical
Engineering
Paint and varnish - Flat alkyd based
paints for interior and exterior use
Review
1035/2010 1/1/2014 31/12/2014
Questionnaire
2013
3 GCC
1096/2002
4 Chemical
Engineering
Paint and varnish - Air drying
semigloss paints for general
purposes
Review
1139/2010 1/1/2014 31/12/2014
Questionnaire
2013
4 SASO
470/2002
5 Chemical
Engineering
Paint and varnish - A ِ ِ ِlkyd
based undercoating paints for
general purposes
Review
1036/2010 1/1/2014 31/12/2014
Questionnaire
2012
5 GCC
541/1994
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Responsible
technical
committee
Petroleum No. of Technical
committee (6)
Secretary of
Technical Committee Zainab AL-amawi
# Sector Proposal Process
type*
Start date End date Input Priority Notes
1
Chemical
Engineering Biodiesel
preparation
1/1/2014 1/12/2014
Ministry of Energy and
Mineral Resources
1
ASTM D 6751-11b
2
Chemical
Engineering Synthetic diesel
preparation
1/1/2014 1/12/2014
Ministry of Energy and
Mineral Resources
1
3 Chemical
Engineering Petroleum and Petroleum Products -
Fuel oil
Review
196/2005 1/1/2014 1/12/2014
Questionnaire
2013 2
BS 2869/2009
4 Chemical
Engineering Petroleum and Petroleum Products -
Automotive fuels - Diesel oil
Review
195/2005 1/1/2014 1/12/2014
Questionnaire
2013 2
BS 590/2010
5 Chemical
Engineering Petroleum and petroleum products -
Aviation turbine fuels
Review
99/2005 1/1/2014 1/12/2014
Questionnaire
2013 4 ASTM D 1566/2012
6 Chemical
Engineering
Petroleum and petroleum products -
Liquefied petroleum gases (L.P.G.)
for domestic use -Commercial
propane and butane mixture
Review
298/2005 1/1/2014 1/12/2014
Questionnaire
2013 2 ASTM D 1835/2012
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Responsible
technical
committee
Petroleum No. of Technical
committee (6)
Secretary of
Technical Committee Zainab AL-amawi
# Sector Proposal Process
type*
Start date End date Input Priority Notes
7 Chemical
Engineering
Petroleum and petroleum products -
Automotive gasoline
Review
164/2008 1/1/2014 1/12/2014
Questionnaire
2013 5
BS 7800/2012
8 Chemical
Engineering Petroleum and petroleum products -
Household kerosene
Review
194/2005 1/1/2014 1/12/2014
Questionnaire
2013 3
BS 2869/2009
ASTM D 3699/2008
* Process Type: Preparation, review (amendment, withdrawal, or restructuring), or adoption.
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Responsible
technical
committee
Gold and gold alloys No. of Technical committee Secretary of
Technical Committee Zainab AL-amawi
# Sector Proposal Process type* Start date End date Input Priority Notes
1 1 Gold and gold alloys - Precious
metals
Amendment
391/1984 1/1/2014 31/12/2014
Internal request
from Precious
Metals & Stones
Department
(PMSD)
1
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Responsible
technical
committee
Aluminium No. of Technical
committee (24)
Secretary of
Technical Committee
Eng. Mahmoud Al-
Snabra
# Sector Proposal Process
type*
Start date End date Input Priority Notes
1 Mechanical
engineering
Aluminium and aluminium alloys -
Determination of thickness of
anodic oxide coatings - By split
beammicroscope
amendment
306/1998 08/01/2014 08/08/2014 Periodical review 1 ISO 2143:2010
2 Mechanical
engineering
Aluminium and aluminium alloys -
Determination of thickness of
anodic oxide coatings - By split
beammicroscope
amendment
305/1997 08/02/2014 08/08/2014 Periodical review 2 ISO 2128:2010
3 Mechanical
engineering
Aluminium - Anodizing of
aluminium andits alloys -
Assessment of sealing quality by
measurement of admittance or
impedance
amendment
1203/1998 08/03/2014 08/09/2014 Periodical review 3 ISO 2931:2010
4 Mechanical
engineering
Aluminium - Anodizing of
aluminium andits alloys -
Assessment of resistance of anodic
oxide coating to cracking by
deformation
amendment
352/1998 08/04/2014 08/10/2014 Periodical review 4 ISO 3211:2010
5 Mechanical
engineering
Aluminium - Classification and
composition of unalloyed
aluminium ingotes for remelting
amendment
386/2002 08/05/2014 08/11/2014 Periodical review 5 ISO 115:2003
6 Mechanical
engineering
Containers - Aluminium foil
cateringcontainers
amendment
757/1991 08/06/2014 08/12/2014 Periodical review 6 1:1993-BSEN631
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Responsible
technical
committee
Aluminium No. of Technical committee (24) Secretary of
Technical Committee
Eng. Mahmoud Al-
Snabra
# Sector Proposal Process
type*
Start date End date Input Priority Notes
7 Mechanical
engineering
Aluminium - Aluminium coiled
stripfoils cold-rolled with a
thickness of (7-20) micrometer -
Dimensions
amendment
759/1991 08/07/2014 08/01/2015 Periodical review 7
AIDMO 5955: 1985
1:2007-ISO 209
3:1985-ISO 3134
DIN 1784:1970
* Process Type: Preparation, review (amendment, withdrawal, or restructuring), or adoption.
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Annex
Responsible
technical
committee
Aluminium No. of Technical
committee (24)
Secretary of
Technical Committee
Eng. Mahmoud Al-
Snabra
# Sector Proposal Process
type*
Start date End date Input Priority Notes
1 Mechanical
engineering Aluminium composite panle Preparation - -
Questionnaire
Arabian metal
Coating Co.
-
2 Mechanical
engineering Aluminium Coil Coating Preparation - -
Questionnaire
Arabian metal
Coating Co.
-
3 Mechanical
engineering
Wrought aluminium and aluminium
alloy extruded rods/bars, tubes and
profiles - Part 1: Technical
conditions for inspection and
delivery
amendment
380-1:2003 - - Periodical review
1:2012-ISO 6362
4 Mechanical
engineering
Wrought aluminium and aluminium
alloy extruded rod/bars,tubes and
profiles - Part 2: Mechanical
properties
amendment
380-2:2003 - - Periodical review
2:2012-ISO 6362
5 Mechanical
engineering
Wrought aluminum and aluminum
alloy extruded rods/bars, tubes and
profiles - Part 3: Exturded
rectangular bars - Tolerances on
shape and dimensions
amendment
380-3:2003 - - Periodical review
3:2012-ISO 6362
6 Mechanical
engineering
Wrought aluminium and aluminium
alloy extruded rods/bars , tubes and
profiles part4: Extruded profiles -
Tolerances on shape and dimensions
amendment
380-4:2003 - - Periodical review
4:2012-ISO 6362
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Responsible
technical
committee
Aluminium No. of Technical
committee (24)
Secretary of
Technical Committee
Eng. Mahmoud Al-
Snabra
# Sector Proposal Process
type*
Start date End date Input Priority Notes
7 Mechanical
engineering
Wrought aluminum and aluminum
alloy extruded rods / bars, tubes and
profiles, part 5: Extruded round,
square and hexagonal bars -
Tolerances on shape and dimensions
amendment
380-5:2003 - - Periodical review 5:2012-ISO 6362
8 Mechanical
engineering
Wrought aluminum and aluminum
alloy extruded rods / bars, tubes and
profiles, Part 6: Round, square,
rectangular and hexagonal tubes -
Tolerances on shape and dimensions
Preparation
380-6:2003 - - Periodical review 6:2012-ISO 6362
9 Mechanical
engineering
Wrought aluminum and aluminum
alloy extruded rods / bars, tubes and
profiles, Part 7: Chemical
composition
Preparation
380-7:2003 - - Periodical review 7:2012-ISO 6362
10 Mechanical
engineering Nails - Aluminium nails
amendment
177:1996 - - Periodical review
ESO 184:1996 "withdrawn"
11 Mechanical
engineering
Aluminium - Wrought aluminium
andaluminium alloy products -
General conditions for inspection
anddelivery
amendment
444:1986 - - Periodical review
ISO 444:1986
"withdrawn"
12 Mechanical
engineering
Aluminium and aluminium alloys -
Drawnround bars - Tolerances
amendment
379:1997 - - Periodical review 3:2012-ISO 6363
* Process Type: Preparation, review (amendment, withdrawal, or restructuring), or adoption.
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Responsible
technical
committee
Iron and Steel No. of Technical
committee (28)
Secretary of
Technical Committee
Eng. Mahmoud Al-
Snabra
# Sector Proposal Process
type*
Start date End date Input Priority Notes
1 Mechanical
engineering
Pipes - Steel pipes welded and
seamless used for gas and water
amendment
137/2006 28/11/2013 28/03/2014 Periodical review 1
BS EN 10255:2004 + A1:2007
2 Mechanical
engineering
Hot-rolled steel bars, part 1:
Dimensions of round bars
amendment
109/1997 01/04/2014 01/08/2014 Periodical review 2 1:1980-ISO 1035
3 Mechanical
engineering
Hot-rolled steel bars, part 2:
Dimensions of square bars
amendment
110/1997 01/05/2014 01/09/2014 Periodical review 3 2:1980-ISO 1035
4 Mechanical
engineering
Hot-rolled steel bars, part 3:
Dimensions of flat bars Preparation 01/06/2014 31/12/2014 Periodical review 4 3:1980-ISO 1035
5 Mechanical
engineering
Hot-rolled steel bars, part 4:
Tolerances Preparation 01/07/2014 31/12/2014 Periodical review 5 4:1980-ISO 1035
6 Mechanical
engineering
Pipes - Malleable cast iron fittings
threaded
amendment
1331/2002 01/08/2014 01/05/2015 Periodical review 6 ISO 49:1994/Cor 1:1997
7 Mechanical
engineering Grey cast iron - Classification
amendment
702/2004 01/09/2014 01/06/2014 Periodical review 7 ISO 185:2005
* Process Type: Preparation, review (amendment, withdrawal, or restructuring), or adoption.
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Responsible
technical
committee
Iron and Steel No. of Technical committee (28) Secretary of
Technical Committee
Eng. Mahmoud Al-
Snabra
# Sector Proposal Process type* Start date End date Input Priority Notes
1 Mechanical
engineering
Standard specification for hot rolled
deformed and plain carbon steel bars
for concrete reinforcement
amendment
441:2010 Periodical review ـ ـ
-ASTM A615/ A615M 2013
2 Mechanical
engineering
Steel - Carbon steel bars for concrete
reinforcement, Part 2: Mild steel and
cold worked steel bars
Amendment or
withdrawal
442:1996 Periodical review ASTM A 615/1986 ـ ـ
3 Mechanical
engineering
steel - cold reduced steel wire for the
reinforcement of concrete
Steel - Steel fabric for the
reinforcement of concrete
amendment
1165:1999 Periodical review ـ ـ
4482:2005+A1:2007BS
4 Mechanical
engineering
Steel - Steel fabric for the
reinforcement of concrete
amendment
1166:1999 Periodical review BS 4483:2005 ـ ـ
5 Mechanical
engineering Carbon steel pipes and fittings preparation ـ ـ
Questionnaire
2013 – Ministry
of public works
and housing
ASTM A106
6 Mechanical
engineering
Safety requirements for bonded
abrasive products preparation ـ ـ
Questionnaire
2013 – Market
surveillance
department
EN 12413:2011
7 Mechanical
engineering
Iron - Covers - Cast iron manhole
covers and frames
amendment
773:1991 Periodical review BS EN 124:1994 ـ ـ
8 Mechanical
engineering
Specification and qualification of
welding procedure for metallic
materials - Welding procedure test,
Part 1: Arc and gas welding of steels
and arc welding of nickel and nickel
alloys
amendment
10089-1:2007 Periodical review ـ ـ
1:2004-ISO 15614
1-ISO/DIS 15614
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Responsible
technical
committee
Iron and Steel No. of Technical committee (28) Secretary of
Technical Committee
Eng. Mahmoud Al-
Snabra
# Sector Proposal Process type* Start date End date Input Priority Notes
9 Mechanical
engineering
Qualification test of welders - Fusion
welding, Part 1: Steels
amendment
10090-1:2007 Periodical review 1:2011-EN 287 ـ ـ
10 Mechanical
engineering
Specification for nails, Part 1: Steel
nails
amendment
175-1:2004 Periodical review ـ ـ
1:2002 -BS 1202"current, under review"
11 Mechanical
engineering
Standard specification for seamless
carbon steel pipe for high -
temperature service
amendment
1832:2008 Periodical review ـ ـ
ASTM A106/A106M:2011
12 Mechanical
engineering Pipes - Steel pipes - thicknesses
amendment
125:1997 ـ Periodical review ـ ـ
13 Mechanical
engineering
Galvanization - Hot-dip batch
galvanizing - Requirement and testing
amendment
1155:1997 Periodical review ISO 1461:2009 ـ ـ
14 Mechanical
engineering
Iron and products - Cold-reduced
black plate and electrolytic tinplate
amendment
372:2005 Periodical review ـ ـ
ISO/WD 11951
10202:2001/AC:2003EN
15 Mechanical
engineering
Iron and steel products-Tinplate and
lacquered tinplate and tin cans
intended for canning foodstuffs
amendment
373:2007 Periodical review EN 10202:2001/AC:2003 ـ ـ
16 Mechanical
engineering
Lath - Steel lath for plastering -Part
one
amendment
712:1990 Periodical review ـ ـ
1:2009-BS EN 1358
17 Mechanical
engineering
Steel - Structural steel and methods of
testing
amendment
713:1990 Periodical review ـ ـ
ASTM A6/6M:2012
18 Mechanical
engineering Lath - Steel lath for plastering -Part 2
amendment
737:1990 Periodical review ـ ـ
25:2009-BS EN 1358
19 Mechanical
engineering
draw steel wire for elevator ropes-
specifications
restructuring
786:2004 Periodical review ISO 4101:1983 ـ ـ
20 Mechanical
engineering zinc-coated steel wire for fencing
Amendment or
withdrawal
947:2004 Periodical review ISO 7900:2006 ـ ـ
21 Mechanical
engineering
Screws and nuts - Symbols and
designation of dimensions
amendment
1211:1999 Periodical review ISO 225:2010 ـ ـ
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Responsible
technical
committee
Iron and Steel No. of Technical committee (28) Secretary of
Technical Committee
Eng. Mahmoud Al-
Snabra
# Sector Proposal Process type* Start date End date Input Priority Notes
22 Mechanical
engineering
Screws and nuts - Screws, nuts and
accessories - Terminology and
nomenclature
amendment
1213:2000 Periodical review 1891:2009 ISO ـ ـ
23 Mechanical
engineering
Specifications for steel wire for
general fencing purposes
restructuring or
withdrawal
795:2009 Periodical review BS 4102:1998 ـ ـ
24 Mechanical
engineering
Steel wire ropes for lifts - minimum
requirements
restructuring
794:2009 Periodical review ISO 4344:2004 ـ ـ
25 Mechanical
engineering
Screws - Hexagon socket head cap
screws
amendment
1190:1998 Periodical review ـ ـ
ISO 3506:1979 "withdrawn"
ISO 898:1988 "withdrawn"
ISO 4042:1999
DIN 912:2011
26 Mechanical
engineering
Screws - Hexagon socket head caps
crews
amendment
1156:1997 Periodical review ـ ـ
1:1988-ISO 8989
ISO 4042:1999
DIN 7984:2009
2:1984-DIN 267
27 Mechanical
engineering
Methods of test for pallet joints
Part1:Determenation of bending
resistance of pallet nails, other dowel-
type fastners and staples
amendment
1715-1:2005 Periodical review ـ ـ
1:1994/Amd -ISO 127771:2008
28 Mechanical
engineering
methods of test for pallet joints
part2:Determenation of withdrawal
and head pull-through resistance of
pallet nails and staples
restructuring
1715-2:2005 Periodical review 2:2000-12777ISO ـ ـ
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Responsible
technical
committee
Iron and Steel No. of Technical committee (28) Secretary of
Technical Committee
Eng. Mahmoud Al-
Snabra
# Sector Proposal Process type* Start date End date Input Priority Notes
29 Mechanical
engineering
Methods of test for pallet joints part3:
Determination of strength of pallet
joints
restructuring
1715-3:2005 Periodical review 3:2000-ISO 12777 ـ ـ
* Process Type: Preparation, review (amendment, withdrawal, or restructuring), or adoption.
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Responsible technical
committee Construction material
No. of Technical committee
(2) Secretary of
Technical Committee Eng. Maram Oran
# Sector Proposal Process type* Start date
End date Input Priority Notes
1 Construction
Cement - Part 11: Determination ofthe specific surface area of
solids by gas a dsorption using the BETmethod
Review
1470-11/2001 2014
- Periodical
review 1
2
Construction Cement - Methods of testing
cement Part 2: Chemical analysis of cement
Review
1470-2/2005 2014 -
Periodical
review 1
3 Construction
Cement - Methods of testing cement -Part 3 : Determination of setting time and soundness
Review
1470-3/2005 2014 -
Periodical
review 1
4 Construction Cement - Methods of testing cement Part 5 : Pozzolanicity test for pozzolanic cements
Review
1470-5/2005 2014 -
Periodical
review 1
5 Construction
Cement - Methods of testing cement Part 7 : Methods of
taking and preparing samples of cement
Review
1470-7/2005 2014 -
Periodical
review 1
6 Construction
Cement - Methods of testing cement Part 21: Determination of the chloride , carbon dioxide and
alkali content of cement
Review
1470-21/2005 2014 -
Periodical
review 1
7 Construction Cement - Methods of testing
cement Part 8: Heat of hydration - Solution method
Review
1470-8/2005 2014 -
Periodical
review 1
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Responsible technical
committee Construction material
No. of Technical committee
(2) Secretary of
Technical Committee Eng. Maram Oran
# Sector Proposal Process type* Start date
End date Input Priority Notes
8 Construction Cement - Methods of testing
cement Part 6 : Determination of fineness
Review
1470-6/2005 2014 -
Periodical
review 1
9 Construction
Cement - Methods of testing
cement Part 9: Heat of hydration
- Semi-adiabtic method
Review
1470-9/2005 2014 -
Periodical
review 1
10 Construction Standard Specification for
Limestone Dimension Stone
Review
851/2009 2014 -
Periodical
review 1 -
11 Construction
Aggregates - Tests for
geometrical properties of
aggregates part9: Assessment of
fines-Methylene blue test
Review
9-1677/2005 2014 -
Periodical
review 1 -
12 Construction
Fly ash-Method of testing fly ash
Part1 :Determination of free
calcium oxide content
Review
1-1673/2005 2014 -
Periodical
review 1 -
13 Construction
Cement Part 4: Composition
specifications conformity criteria
for low early strength
blastfurnace cements
Review
4-30/2007 2014 -
Periodical
review 1 -
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Responsible technical
committee Construction material
No. of Technical committee
(2) Secretary of
Technical Committee Eng. Maram Oran
# Sector Proposal Process type* Start date
End date Input Priority Notes
14 Construction
Cement - Composition,
specifications and conformity
criteria for very low heat special
cements
Review
10057/2007 2014 -
Periodical
review 1 -
15 Construction
Building lime Part 1: Definitions,
specifications and conformity
criteria
Review
1-10031/2007 2014 -
Periodical
review 1 -
16 Construction
Fly ash for concrete Part 1:
Definition, specifications and
conformity criteria
Review
1-10030/2007 2014 -
Periodical
review 1 -
17 Construction
Pigments for the colouring of
building materials based on
cement and/or lime -
Specifications and methods of
test
Review
10046/2007 2014 -
Periodical
review 1 -
* Process Type: Preparation, review (amendment, withdrawal, or restructuring), or adoption.
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Responsible
technical
committee
Construction material No. of Technical
committee (2)
Secretary of
Technical Committee Eng. Maram Oran
# Sector Proposal Process
type*
Start date End date Input Priority Notes
1 Construction Concrete - Aggregates for concrete Amendment
96/1987 1/1/2014 30/2/2014 Survey 2011 1
En 12620
Astm c33/c33m
2
Construction
Standard specifications for granite
dimension stone
Amendment
1921/2010 30/6/2014 30/9/2014 Survey 2014 2
ASTM C 615
3 Construction Cement - Part 2: Conformity
evaluation
Amendment
30-2/2001 30/3/2014 30/6/2014 Survey 2014 1 En 197-2
4 Construction
Standard Specification for
Pedestrian and Light Traffic Paving
Brick
Amendment
34/1993 1/1/2014 15/2/2014 Periodical review 1
Astm C902 – 11
5 Construction
Standard Test Methods for
Sampling and Testing Brick and
Structural Clay Tile
Preparation 1/1/2014 15/2/2014 Periodical review
1 Astm c 67
6 Construction Cement-Determination of
Whiteness of white portland cement review 2014 - Periodical review 1 -
7 Construction
Cement, Part 1: Composition,
specifications and conformity
criteria for common cements
Amendment
30-1/2007 30/3/2014 30/6/2014 Periodical review 1 EN 197-1
8 Construction
Standard Test Methods for Physical
testing of Gypsum ,Gypsum Plaster
and gypsum concrete
Amendment
487/1993 30/6/2014 30/9/2014 Survey 2013 4
ASTM C 471+C472
+
BS EN 13279-1:2008
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Responsible
technical
committee
Construction material No. of Technical
committee (2)
Secretary of
Technical Committee Eng. Maram Oran
# Sector Proposal Process
type*
Start date End date Input Priority Notes
9 Construction SRC clinker Preparation 30/9/2014 30/12/2014 Survey 2012 3 -
10 Construction Ordinary clinker Preparation 30/9/2014 30/12/2014 Survey 2012 4 -
11 Construction
Standard Specification for
Lightweight Aggregates for
Structural Concrete
Amendment
949/1993 30/4/2014 30/7/2014 Periodical review 1 -
12 Construction
Cement - Sulfate-resisting Portland
cement
Amendment
118/2005 2014 - Periodical review 1 -
13 Construction Concrete - Light weight aggregates
for concrete masonry units
Amendment
948/1993 30/5/2014 30/8/2014 Periodical review 1 -
14 Construction
Gypsum - Hemihydrate building
gypsum
Amendment
488/1992 30/6/2014 30/9/2014 Periodical review 1 -
15 Construction
Cement - Methods of testing cement
Part1: Determination of strength
Amendment
1-1740/2005 2014 - Periodical review 2 -
* Process Type: Preparation, review (amendment, withdrawal, or restructuring), or adoption.
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Eng. Narmeen Barakat Secretary of
Technical Committee (56 ) No. of
Technical Committee
Construction
materials
products
Technical Committee (TC)
Notes Priority Input Date of
finish Date of start Process Proposal Sector #
- 1 Periodical
review 6/2014 4/2014
Restructuring
944/1993
Masonry units-Hollow
blocks for slab Construction 1
BS EN 771-2:2011 1
Periodical
review 12/2014 10/2014
Amendmet
154/2000 Bricks –sand lime bricks Construction 2
BS EN 480-
1:2006+A1:2011
BS EN 934-
2:2009+A1:2012
BS EN 934-6:2001
1 Periodical
review 10/2014 8/2014
Amendment 673/1989
Concrete admixtures-
methods of sampling of
concrete admixtures
Construction 3
BS EN 1339:2003
BS EN 1340:2003 1
Requested by
Technical
Committee
10/2014 7/2014 Amendmet
479/1994
Construction materials -
Precast concrete kerbs Construction 4
ISO 10545-5:1997
1 Requested by
RSS 1/2014 FDJS
Amendmet
375-5/2000
Ceramic tiles
Part 5:determination of
impact resistance by
measurement of coefficient
of restitution
Construction 5
ISO 10545-9:2004
1 Requested by
RSS 1/2014 FDJS
Amendmet
375-9/2000
Ceramic tiles —Part 9:
Determination of resistance
to thermal shock
Construction 6
ISO 10545-1:1995
1 Periodical
review 2/2014 2/2014
Amendmet
375-1/2000
Ceramic tiles Part 1:
Sampling and basis for
acceptance
Construction 7
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Eng. Narmeen Barakat Secretary of
Technical Committee (56 ) No. of
Technical Committee
Construction
materials
products
Technical Committee (TC)
Notes Priority Input Date of
finish Date of start Process Proposal Sector #
ISO 10545-7:1996
1 Periodical
review 2/2014 2/2014
Amendment 375-7/2000
Ceramic tiles Part 7:
Determination of resistance
to surface abrasion for
glazed tiles
Construction 8
ISO 10545-8:1994
1 Periodical
review 3/2014 3/2014
Amendment 375-8/2000
Ceramic tiles Part 8:
Determination of linear
thermal expansion
Construction 9
ISO 10545-10:1995
1 Periodical
review 3/2014 3/2014
Amendment 375-5/2000
Ceramic tiles Part 10:
Determination of moisture
expansion
Construction 10
ISO 10545-11:1994
1 Periodical
review 4/2014 4/2014
Amendment 375-11/2000
Ceramic tiles —Part 11:
Determination of crazing
resistance of glazed tiles
Construction 11
ISO 10545-
12/1995/cor1:1997
1 Periodical
review 4/2014 4/2014
Amendment 375-12/2000
Ceramic tiles Part 12:
Determination of frost
resistance
Construction 12
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Eng. Narmeen Barakat Secretary of
Technical Committee (56 ) No. of
Technical Committee
Construction
materials
products
Technical Committee (TC)
Notes Priority Input Date of
finish Date of start Process Proposal Sector #
ISO 10545-13/1995
1 Periodical
review 5/2014 5/2014
Amendment
375-13/2000
Ceramic tiles Part 13:
Determination of chemical
resistance
Construction 13
ISO 10545-
14/1995/cor1:1997
1 Periodical
review 5/2014 5/2014
Amendment 375-14/2000
Ceramic tiles Part 14:
Determination of resistance
to stains
Construction 14
ISO 10545-15/1995
1 Periodical
review 6/2014 6/2014
Amendment
375-15/2000
Ceramic tiles
Part 15: Determination of
lead and cadmium given off
by glazed tiles
Construction 15
ISO 10545-16/2010
1 Periodical
review 6/2014 6/2014
Amendment 375-16/2000
Ceramic tiles
Part 16: Determination of
small colour differences
Construction 16
BS 5911-
1:2002+A2:2010 1 Requested by
RSS 9/2014 9/2014
Amendment 289/1994
Pipes - Precast concrete pipes Construction 17
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Eng. Narmeen Barakat Secretary of
Technical Committee (56 ) No. of
Technical Committee
Construction
materials
products
Technical Committee (TC)
Notes Priority Input Date of
finish Date of start Process Proposal Sector #
ISO 10545-2012
1 Requested by
RSS 3/2014 1/2014
Amendment 375/2007
Ceramic tiles-definitions,
classification, characteristic
and marking
Construction 18
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Eng. Narmeen Barakat Secretary of
Technical Committee (56 ) No. of
Technical Committee
Construction
materials
products
Technical Committee (TC)
Notes Priority Input Date of
finish Date of start Process Proposal Sector #
EN 934-
2:2009+A1:2012 1
Periodical
review
Amendmet
10035-
2/2007
Admixtures for concrete,
mortar and grout Part 2:
Concrete admixtures -
Definitions, requirements,
conformity, marking and
labelling
Construction 1
EN 934-
3:2009+A1:2012
1 Periodical
review
Amendmet
10035-
3/2007
Admixtures for concrete,
mortar and grout Part3:
Admixtures for masonry
mortar - Definitions,
requirements, conformity,
marking and labelling
Construction 2
EN 934-4:2009
1 Periodical
review
Amendment 10035-
4/2007
Admixtures for concrete,
mortar and grout Part 4:
Admixtures for grout for
prestressing tendons -
Definitions, requirements,
conformity, marking and
labelling
Construction 3
BS EN 998-1:2010
1 Periodical
review
Amendmet
10036-
1/2007
Specification for mortar for
masonry - Part 1: Rendering
and plastering mortar Construction 4
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Eng. Narmeen Barakat Secretary of
Technical Committee (56 ) No. of
Technical Committee
Construction
materials
products
Technical Committee (TC)
Notes Priority Input Date of
finish Date of start Process Proposal Sector #
BS EN 998-2:2010
1 Periodical
review
Amendmet
10036-
2/2007
Specification for mortar for
masonry - Part 2: Masonry
mortar Construction 5
EN 771-4:2011
1 Periodical
review
Amendmet
1865-4/2009
Masonry units Part 4 :
Autoclaved aerated concrete
masonry blocks Construction 6
EN 12504-1:2009
1 Periodical
review
Amendmet
1653-1/2004
Concrete - Testing concrete in
structures part 1: cored
specimens - Taking,
examining and Testing in
comperrion
Construction 7
EN 12504-2:2010
1 Periodical
review
Amendment 1653-2
Concrete - Testing concrete in
structures Part 2: Non-
destructive testing-
determination of rebound
number
Construction 8
EN 12390-1:2012
1 Periodical
review
Amendment 1652-1/2004
Concrete - Testing hardened
concret part 1:Shape,
dimensinons and other
requirements for specimens
and moulds
Construction 9
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Eng. Narmeen Barakat Secretary of
Technical Committee (56 ) No. of
Technical Committee
Construction
materials
products
Technical Committee (TC)
Notes Priority Input Date of
finish Date of start Process Proposal Sector #
EN 12390-2:2009
1 Periodical
review
Amendment 1652-2/2004
Concrete -Testing hardened
concrete Part 2: Making and
curing specimens for stength
tests
Construction 10
EN 12390-3:2009
1 Periodical
review
Amendment 1652-3/2004
Concrete - Testing hardend
concrete part 3:Compressive
strength test specimens Construction 11
EN 12390-4:2000
1 Periodical
review
Amendment 1652-4/2004
Concrete - Testing hardened
concrete Part 4: compressive
strength-specification for
testing machines
Construction 12
EN 12390-5:2009
1 Periodical
review
Amendment
1652-5/2004
Concrete - Testing hardened
Concrete Part 5: Flexural
strength of test specimens Construction 13
EN 12390-6:2009
1 Periodical
review
Amendment 1652-6/2004
Concrete - Testing hardened
concrete part 6: Testing
splitting strength of test
specimens
Construction 14
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Eng. Narmeen Barakat Secretary of
Technical Committee (56 ) No. of
Technical Committee
Construction
materials
products
Technical Committee (TC)
Notes Priority Input Date of
finish Date of start Process Proposal Sector #
EN 12390-7:2009
1 Periodical
review
Amendment
1652-7/2004
Concrete - Testing hardened
concrete Part 7: Density of
hardened concrete Construction 15
EN 12390-8:2009
1 Periodical
review
Amendment 1652-8/2004
Concrete - Testing hardend
concrete Part 8: Depth of
penetration of water pressure Construction 16
EN 206-1:2000/A2:2005
ASTM C94/C94M-13a 1 Periodical
review
Amendment 498/2005
Concrete -Specifications,
performance, production and
conformity Construction 17
EN 12350-1:2009 1
Periodical
review
Amendment 1651-1/2004
Concrete - Testing fresh
concrete part 1: Sampling Construction 18
EN 12350-2:2009 1
Amendment
1651-2/2004 Concrete -Testing fresh
concrete part 2: Slump test
Construction
19
EN 12350-3:2009 1
Amendment
1651-3/2004
Concerte -Testing
freshconcrete part 3: Vebe test Construction
20
EN 12350-4:2009 1
Amendment
1651-4/2004
Concrete - Testing fresh
concrete part 4 : Degree of
compactability
Construction 21
EN 12350-5:2009 1
Amendment
1651-5/2004
Concrete - Testing fresh
concrete parte 5: flow table
Construction 22
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Eng. Narmeen Barakat Secretary of
Technical Committee (56 ) No. of
Technical Committee
Construction
materials
products
Technical Committee (TC)
Notes Priority Input Date of
finish Date of start Process Proposal Sector #
test EN 12350-6:2009
2 Amendment
1651-6/2004
Concrete - Testing fresh
concrete part 6: density Construction
23
EN 12350-7:2009
2 Amendment
1651-7/2004
Concrete - Testing fresh
concrete Part 7: Air content -
Pressure methods
Construction 24
EN 12350-8:2009
2 Amendment
1651-8/2004
Concrete -Testing fresh
concrete part 8: Air content -
Volumetric method
Construction 25
EN 520:2004+A1:2009 1
Amendment
10044/2007
Gypsum plasterboard -
Definitions, requirements and
test methods
Construction 26
BS EN 13813:2002 1
Amendment 10054/2007
Screed material and floor
screeds - Screed material -
Properties and requirements
Construction 27
BS EN 12859:2011 1
Amendment 10050/2007
Gypsum blocks - Definitions,
requirements and test methods Construction
28
EN 845-2:2013 1
Amendment 10045/2007
Specifications for ancillary
components for masonry Part
2: Lintels
Construction 39
BS EN 1304-2013
1
Amendment 915/1992
Construction materials - Clay
roofing tiles
Construction
30
EN 13748-
1:2004/AC:2005 Amendment
45-1/2009
Terrazzo tiles Part 1: Terrazzo
tiles for internal use Construction
31
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Responsible
technical
committee
Hygienic paper No. of Technical
committee (34)
Secretary of
Technical Committee Eng. Dalal shehadeh
# Sector Proposal Process
type*
Start date End date Input Priority Notes
1 Chemical
engineering
Hygienic paper- Toilet paper
156/2007
Amendment
1/1/2014 31/12/2014 Technical
committee -
All the standards will be amended because new testing methods
were approved
2 Chemical
engineering
Hygienic paper- testing of testing
paper tissues and towels
396/1997
Amendment
1/1/2014 31/12/2014 Technical
committee -
3 Chemical
engineering
Hygienic paper-Diapers for babies-
testing methods
609/2005
Amendment
1/1/2014 31/12/2014 Technical
committee -
4 Chemical
engineering
Hygienic paper-Elastic baby diapers
610/2005
Amendment
1/1/2014 31/12/2014 Technical
committee -
* Process Type: Preparation, review (amendment, withdrawal, or restructuring), or adoption.
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Responsible
technical
committee
Appliances Burning Petroleum
Products No. of Technical committee (49)
Secretary of
Technical Committee Eng. Ghaida` Al-Sabe
# Sector Proposal Process type* Start date End date Input Priority Notes
1
Mechanical
Engineering
Gas/air ratio controls for gas
burners and gas burning
appliances Part 1: Pneumatic
types
Amendment
10074-1:2007 30/1/2014 30/3/2014
European Project
Requirements 1
EN 12067-1:1998
2
Mechanical
Engineering
Specification for dedicated
liquefied petroleum gas
appliances - Absorption
refigerators
Amendment
10157:2007 30/1/2014 30/4/2014
European Project
Requirements 1
EN 732:1998
3
Mechanical
Engineering
Domestic cooking appliances
burning gas - part 1-1 : Safety -
General
Amendment
10067-1-1:2007
30/1/2014 30/3/2014 European Project
Requirements 1 EN 30-1-1:2008
4
Mechanical
Engineering
Direct gas-fired washing
machines, of nominal heat input
not exceeding 20 kw Part 1:
Safety
Amendment
10070-1:2007
30/1/2014 30/3/2014 European Project
Requirements 1 EN 12244-1:1998
5
Mechanical
Engineering
Direct gas-fired washing
machines, of nominal heat input
not exceeding 20 kw Part 2:
Rational use of energy
Amendment
10070-2:2007
30/1/2014 30/3/2014 European Project
Requirements 1 EN 12244-2:1998
6
Mechanical
Engineering
Gas-fired type B tumble dryers
of nominal heat input not
exceeding 20 kw Part 1: Safety
Amendment
10072-1:2007 30/1/2014 30/3/2014
European Project
Requirements 1 EN 12752-1:1999
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Responsible
technical
committee
Appliances Burning Petroleum
Products No. of Technical committee (49)
Secretary of
Technical Committee Eng. Ghaida` Al-Sabe
# Sector Proposal Process type* Start date End date Input Priority Notes
7
Mechanical
Engineering
Gas-fired type B tumble dryers
of nominal heat input not
exceeding 20 kw Part 2: Rational
use of energy
Amendment
10072-2:2007 30/1/2014 30/3/2014
European Project
Requirements 1 EN 12752-2:1999
8
Mechanical
Engineering
Domestic direct gas-fired tumble
dryers of types B22D and B23D,
of nominal heat input not
exceeding 6 kW Part 2: Rational
use of energy
Amendment
10073-2:2007 30/1/2014 30/3/2014
European Project
Requirements
1 EN 1458-2:1999
9
Mechanical
Engineering Heaters – Domestic gas heaters
Amendment
899:1992 30/1/2014 30/3/2014
Periodical Review 1
Saudi Standard
59/1994
10
Mechanical
Engineering
Welded steel tanks for liquefied
petroleum gas (LPG) – Road
tankers – Design and
manufacture
Preparation 1/4/2014 1/10/2014
Ministry of
Energy and
Mineral
Resources
2 EN 12493
11
Mechanical
Engineering Welded steel tanks for the
transport of liquefiable gases Preparation 1/4/2014 1/10/2014
Ministry of
Energy and
Mineral
Resources
2 BS 7122
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Responsible
technical
committee
Appliances Burning Petroleum
Products No. of Technical committee (49)
Secretary of
Technical Committee Eng. Ghaida` Al-Sabe
# Sector Proposal Process type* Start date End date Input Priority Notes
12
Mechanical
Engineering LPG gas code
Amendment
1812:2008 1/4/2014 1/10/2014
Ministry of
Energy and
Mineral
Resources
2 NFPA 58
13
Mechanical
Engineering
Model code of safe practice in
the petroleum industry, Part 9:
Liquefied Petroleum Gas Safety
Code
Preparation 1/4/2014 1/10/2014
Ministry of
Energy and
Mineral
Resources
2 UK Institute of
Petroleum
14
Mechanical
Engineering
UKLPG Association Code of
Practice Number 2: Safe
Handling and Transport of LPG
in Bulk by road.
Preparation
1/4/2014 1/10/2014
Ministry of
Energy and
Mineral
Resources
2 UKLPG Association
Code of Practice NO.2
15
Mechanical
Engineering UKLPG Association Code of
Practice Number 17: Purging
LPG Vessels and Systems.
Preparation
1/4/2014 1/10/2014
Ministry of
Energy and
Mineral
Resources
2
UKLPG Association
Code of Practice
NO.17
16
Mechanical
Engineering UKLPG Association Code of
Practice Number 19: Liquefied
Preparation
1/4/2014 1/10/2014
Ministry of
Energy and
Mineral
Resources
2 WLPGA
29/5/2013
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Responsible
technical
committee
Appliances Burning Petroleum
Products No. of Technical committee (49)
Secretary of
Technical Committee Eng. Ghaida` Al-Sabe
# Sector Proposal Process type* Start date End date Input Priority Notes
17
Mechanical
Engineering Cylinders - Methods of test for
seamless cylinders for
compressed gases
Amendment
736:1990 30/1/2014 30/3/2014 Periodical Review 1 BS 1639
* Process Type: Preparation, review (amendment, withdrawal, or restructuring), or adoption.
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Responsible
technical
committee
Motor Vehicles No. of Technical committee (7) Secretary of
Technical Committee
Eng. Ghaida` Al-
Sabe
# Sector Proposal Process type* Start date End date Input Priority Notes
1
Mechanical
Engineering
Road vehicles - Brake linings -
Compressive strain test methods
Amendment
1848:2008 30/1/2014 30/11/2014
Periodical review
Royal Scientific
Society
(Vehicles
committee)
2 ISO 6310:2009
2
Mechanical
Engineering
Tyres - Passenger car tyres –
General requirement
Amendment
628:2001 30/1/2014 30/11/2014
Periodical review
2 ISO 6312:2010
3
Mechanical
Engineering Motor vehicles - Tyres for motor
vehicles and their trailers
Amendment
1091:1998 30/1/2014 30/11/2014 Periodical review
2 ISO 9619:1992
4
Mechanical
Engineering Motor vehicles : Rear view mirrors
Amendment
1065/1998 30/1/2014 30/11/2014 Periodical review
2 EU Directive
127/71:1971
5
Mechanical
Engineering Motor vehicles - Windscreen
wipers/washer system
Amendment
1063/1998 30/1/2014 30/11/2014 Periodical review
2 EU Directive
318/78:1978
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Responsible
technical
committee
Motor Vehicles No. of Technical committee (7) Secretary of
Technical Committee
Eng. Ghaida` Al-
Sabe
# Sector Proposal Process type* Start date End date Input Priority Notes
6
Mechanical
Engineering
Radiators - Radiators for motor cars
-Methods of test of radiators for
motor cars
Amendment
1981:212 30/1/2014 30/11/2014 Periodical review 2 Saudi Standard
83:1977
7
Mechanical
Engineering
Radiators - Radiators for motor cars Amendment
211: 1981 30/1/2014 30/11/2014 Periodical review 2
Saudi Standard
82:1977
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Responsible
technical
committee
Safety signs on beaches No. of Technical committee Specialist
committee
Secretary of
Technical Committee
Eng. Ghaida` Al-
Sabe
# Sector Proposal Process type* Start date End date Input Priority Notes
1
Mechanical
Engineering
Water safety signs and beach safety
flags - Part 1: Specifications for
water safety signs used in
workplaces and public areas
preparation Will be
added to the
work plan
annex
-
Ministry of
Environment
3
ISO 20712-1:2008
2
Mechanical
Engineering
Water safety signs and beach safety
flags - Part 2: Specifications for
beach safety flags - Colour, shape,
meaning and performance
preparation Will be
added to the
work plan
annex
-
Ministry of
Environment
3
SO 20712-2:2007
3
Mechanical
Engineering Water safety signs and beach safety
flags - Part 3: Guidance for use preparation
Will be
added to the
work plan
annex
-
Ministry of
Environment
3
ISO 20712-1:2008
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Eng. Fadia Al Qhadi Secretary of
Technical Committee 46
No. of
Technical Committee
Electrical and
Communications
Technical
Committee
Notes Priority Input Date of
finish
Date of
start Process Proposal Sector #
The IEC reference
withdrawn 1
Periodical
review 6/2014 1/2014
Withdrawal
JS 60096-3-
2007
Radio-frequency cables. Part
3: General requirements and
tests for single-unit coaxial
cables for use in cabled
distribution systems
Electrical
Engineering
1.
IEC 61196-5:2007
IEC 61196-6:2009 1 Periodical
review 6/2014 1/2014 Adoption
Coaxial communication
cables - Part 5: Sectional
specification for CATV trunk
and distribution cables
Electrical
Engineering 2.
The IEC reference
withdrawn 1
Periodical
review 6/2013 1/2013
Withdrawal
JS 60096-
2:2007
Radio-frequency cables -
Part 2: Relevant cable
specifications
Electrical
Engineering 3.
The IEC reference
withdrawn
Periodical
review 6/2014 1/2014
Withdrawal
JS 60096-0-
1:2007
Radio-frequency cables Part
0 : Guide to the design of
detail specification Section 1:
coaxial cables
Electrical
Engineering 4.
IEC 60096-0-1:2012 Periodical
review 10/2014 4/2014 Adoption
Radio-frequency cables Part
0 : Guide to the design of
detail specification Section 1:
coaxial cables
Electrical
Engineering 5.
IEC 60793-1-1:2008 3 MPWH 2/2015 7/2014 Adoption
Optical fibres - Part 1-1:
Measurement methods and
test procedures - General and
guidance
Electrical
Engineering 6.
IEC 60793-1-20:2001 2 MPWH 5/2015 11/2014 Adoption
Optical fibres - Part 1-20:
Measurement methods and
test procedures - Fibre
geometry
Electrical
Engineering 7.
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Eng. Fadia Al Qhadi Secretary of
Technical Committee 46
No. of
Technical Committee
Electrical and
Communications
Technical
Committee
Notes Priority Input Date of
finish
Date of
start Process Proposal Sector #
IEC 60793-1-21:2001 2
MPWH 10/2015 2/2015 Adoption
Optical fibres - Part 1-21:
Measurement methods and
test procedures - Coating
geometry
Electrical
Engineering 8.
IEC 60793-1-22:2001 2
MPWH 12/2015 6/2015 Adoption
Optical fibres - Part 1-22:
Measurement methods and
test procedures - Length
measurement
Electrical
Engineering 9.
IEC 60793-1-30:2010 2
MPWH 3/2016 8/2015 Adoption
Optical fibres - Part 1-30:
Measurement methods and
test procedures - Fibre proof
test
Electrical
Engineering 10.
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Responsible
technical
committee
Safety of low voltage equipment and electrical appliances
No. of Technical
committee (42)
Secretary of
Technical Committee Eng. Fadia Al Qhadi
# Sector Proposal Process
type*
Start date End date Input Priority Notes
1
Electrical
Engineering
Electrical installations in buildings
and accessories - Switches for
household and similar fixed-
electrical installations - Part 1:
General requirements
Withdrawal
1045/1996 1/2014 6/2014 Periodical review 1
It will still valid until
publication of JS
60669-1
2
Electrical
Engineering Switches for household and similar
fixed electrical installations – Part 1:
General requirements
Amendment
1545/2004 1/2014 6/2014
Requirements of
the Jordanian/
European
Agreement
1
EN 60669-1,
3
Electrical
Engineering
Electrical installations in buildings
and accessories - Plugs and socket -
Outlets for household and similar
purposes - Part one: General
requirements-
Withdrawal
1044/1996 1/2014 6/2014 Periodical review 1
It will be valid until
adoption of new
edition of IEC 60884-
1:2013
4
Electrical
Engineering
Plugs and socket-outlets for
household and similar purposes –
Part 1: General requirements
Adoption 3/2014 10/2014 Periodical review 2
IEC 60884-1:2013
5 Electrical
Engineering Instrument transformers - Part 5:
Capacitor voltage transformers
Withdrawal
JS 60044-5:2007
6/2014 10/2014 Periodical review 3
The IEC reference withdrawn
6 Electrical
Engineering
Instrument transformers - Part 5:
Additional requirements for capacitor
voltage transformers
Adoption 6/2014 12/2014
Periodical review
3 IEC 61869-5:2011
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Responsible
technical
committee
Safety of low voltage equipment and electrical appliances
No. of Technical
committee (42)
Secretary of
Technical Committee Eng. Fadia Al Qhadi
# Sector Proposal Process
type*
Start date End date Input Priority Notes
7
Electrical
Engineering
Hand-held motor-operated electric
tools - Safety - Part 2-2: Particular
requirements for screwdrivers and
impact wrenches
Amendment JS 60745-2-
2:2007
6/2014 12/2014
Periodical review
2
IEC 60745-2-2:2003
8
Electrical
Engineering
Hand-held motor-operated electric
tools - Safety - Part 2-3: Particular
requirements for grinders, polishers
and disk-type sanders
Amendment JS 60745-2-
3:2007
6/2014 12/2014
Periodical review 2 IEC 60745-2-3:2006
9
Electrical
Engineering
Hand-held motor-operated electric
tools - Safety - Part 2-4: Particular
requirements for sanders and polishers
other than disk type
Amendment JS 60745-2-
4:2007
6/2014 12/2014
Periodical review 2 IEC 60745-2-4:2002
10 Electrical
Engineering
Hand-held motor-operated electric
tools - Safety - Part 2-5: Particular
requirements for circular saws
Amendment JS 60745-2-
5:2007
6/2014 12/2014
Periodical review 2 IEC 60745-2-5:2011
11 Electrical
Engineering
Household microwave ovens - Methods for measuring performance
Amendment
JS 60705:2007 6/2014 12/2014 Periodical review
2
IEC 60705:2010
12 Electrical
Engineering
Electric irons for household or similar
use - Methods for measuring
performance
Amendment JS 60311:2007
6/2014 12/2014
Periodical review 2
IEC 60311:2006
13
Electrical
Engineering
Luminaires - Part 2: Particular
requirements - Section 18: Luminaires
for swimming pools and similar
applications
Amendment JS 60598-2-
18:2007
6/2014 12/2014
Periodical review
2
IEC 60598-2-18
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Responsible
technical
committee
Safety of low voltage equipment and electrical appliances
No. of Technical
committee (42)
Secretary of
Technical Committee Eng. Fadia Al Qhadi
# Sector Proposal Process
type*
Start date End date Input Priority Notes
14
Electrical
Engineering
Residual current operated circuit-
breakers without integral overcurrent
protection for household and similar
uses (RCCBs) - Part 1: General rules
Amendment JS 61008-
1:2007
6/2014 12/2014
Periodical review
2
IEC 61008-1:2006
15
Electrical
Engineering
Basic and safety principles for man-
machine interface, marking and
identification - Identification of
equipment terminals, conductor
terminations and conductors
Amendment JS 60445:2007
6/2014 12/2014
Periodical review
2
IEC 60445:2010
16
Electrical
Engineering
Household and similar electrical
appliances - Safety - Part 2-95:
Particular requirements for drives for
vertically moving garage doors for
residential use
Amendment JS 60335-2-
95:2007
6/2014 12/2014
Periodical review
2
IEC 60335-2-95:2011
17
Electrical
Engineering
Household and similar electrical
appliances - Safety - Part 2-103:
Particular requirements for drives for
gates, doors and windows
Amendment
JS 60335-2-
103:2007
6/2014 12/2014 Periodical review 2
IEC 60335-2-103:2011
18 Electrical
Engineering
Effects of current on human beings and
livestock – Part 2: Special requirements Adoption 8/2014 4/2015 Periodical review 4
IEC 60479-2:2007
19
Electrical
Engineering
Effects of current on human beings and
livestock – Part 4: Effects of lightning
strokes on human beings and livestock Adoption 12/2014 6/2015
Periodical review 5
IEC 60479-4:2004
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Responsible
technical
committee
Safety of low voltage equipment and electrical appliances
No. of Technical
committee (42)
Secretary of
Technical Committee Eng. Fadia Al Qhadi
# Sector Proposal Process
type*
Start date End date Input Priority Notes
20
Electrical
Engineering
Effects of current on human beings and
livestock – Part 5: Touch voltage
threshold values for physiological
effects
Adoption 5/2015 3/2016 Periodical review 5
IEC 60479-5:2007
* Process Type: Preparation, review (amendment, withdrawal, or restructuring), or adoption.
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
م. فاديه عبد الغين ادم دؽرتري الؾجـة الػـقة املسئولة: 24 رقم الؾجـة الػـقة: املعدات واألجفزة الؽفربائقة الؾجـة الػـقة املسئولة:
مالحظات األولوية املدخل تاريخ االنتفاء تاريخ البدء * نوع العؿؾقة املؼرتحاملشروع الؼطاع #
1. Particular safety requirements for equipment to be هندسة كهربائوة
connected to telecommunication networks and/or
a cable distribution system
تبني
EN 41003:2008 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
مرحلة مشروع نهائي 1
2.
هندسة كهربائوة
Overvoltage protection for photovoltaic (PV)
power generating systems ـ Guide
سحب
JS 61173:2007 (IEC 61173:1992)
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
1 األوروبوة –األردنوة
جيب أن تسحب املواصفة وأن
تستبدل بـ
IEC 60364-7-712:2002 IECحسب تعدول
3. Coaxial cables – Part 2-5: Sectional specification هندسة كهربائوة
for cables used in cabled distribution networks -
Outdoor drop cables for systems operating at 5
MHz – 3 000 MHz
تبين
EN 50117-2-5:2004 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-2-50117سحب م ق أ 1
5/2013
4. Multi-element metallic cables used in analogue هندسة كهربائوة
and digital communication and control - Part 1:
Generic specification
تبين
EN 50288-1:2013 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1/2013-50288سحب م ق أ 1
5.
Multi-element metallic cables used in analogue هندسة كهربائوة
and digital communication and control - Part 2-1:
Sectional specification for screened cables
characterised up to 100 MHz - Horizontal and
building backbone cables
تبين
EN 50288-2-1:2013 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-2-50288سحب م ق أ 1
1/2013
6.
Multi-element metallic cables used in analogue هندسة كهربائوة
and digital communication and control - Part 2-2:
Sectional specification for screened cables
characterised up to 100 MHz – Work area and
patch cables
تبين
EN 50288-2-2:2013 الشراكة متطلبات اتفاقوة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-2-50288سحب م ق أ 1
2/2013
7.
Multi-element metallic cables used in analogue هندسة كهربائوة
and digital communication and control - Part 3-1:
Sectional specification for unscreened cables
characterised up to 100 MHz - Horizontal and
building backbone cables
تبين
EN 50288-3-1:2013 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-3-50288سحب م ق أ 1
1/2013
8.
Multi-element metallic cables used in analogue هندسة كهربائوة
and digital communication and control - Part 3-2:
Sectional specification for unscreened cables
characterised up to 100 MHz - Work area and
patch cables
تبين
EN 50288-3-2:2013 اتفاقوة الشراكة متطلبات 31/12/2013 1/1/2013
األوروبوة –األردنوة
-3-50288سحب م ق أ 1
2/2013
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
م. فاديه عبد الغين ادم دؽرتري الؾجـة الػـقة املسئولة: 24 رقم الؾجـة الػـقة: املعدات واألجفزة الؽفربائقة الؾجـة الػـقة املسئولة:
مالحظات األولوية املدخل تاريخ االنتفاء تاريخ البدء * نوع العؿؾقة املؼرتحاملشروع الؼطاع #
9.
Multi-element metallic cables used in analogue هندسة كهربائوة
and digital communication and control - Part 4-1:
Sectional specification for screened cables
characterised up to 600 MHz - Horizontal and
building backbone cables
تبين
EN 50288-4-1:2013 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-4-50288سحب م ق أ 1
1/2013
10.
Multi-element metallic cables used in analogue هندسة كهربائوة
and digital communication and control - Part 4-2:
Sectional specification for screened cables
characterised up to 600 MHz - Work area and
patch cables
تبين
EN 50288-4-2:2013 الشراكة متطلبات اتفاقوة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-4-50288سحب م ق أ 1
2/2013
11.
Multi-element metallic cables used in analogue هندسة كهربائوة
and digital communication and control - Part 5-1:
Sectional specification for screened cables
characterised up to 250 MHz - Horizontal and
building backbone cables
تبين
EN 50288-5-1:2013 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-5-50288سحب م ق أ 1
1/2013
12.
Multi-element metallic cables used in analogue هندسة كهربائوة
and digital communication and control - Part 5-2:
Sectional specification for screened cables
characterised up to 600 MHz - Work area and
patch cables
تبين
EN 50288-5-2:2013 الشراكة متطلبات اتفاقوة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-5-50288سحب م ق أ 1
2/2013
13.
Multi-element metallic cables used in analogue هندسة كهربائوة
and digital communication and control - Part 6-1:
Sectional specification for unscreened cables
characterised up to 250 MHz - Horizontal and
building backbone cables
تبين
EN 50288-6-1:2013 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-6-50288سحب م ق أ 1
1/2013
14.
Multi-element metallic cables used in analogue هندسة كهربائوة
and digital communication and control - Part 6-2:
Sectional specification for unscreened cables
characterised up to 250 MHz - Work area and
patch cables
تبين
EN 50288-6-2:2013 اتفاقوة الشراكة متطلبات 31/12/2013 1/1/2013
األوروبوة –األردنوة
-6-50288سحب م ق أ 1
2/2013
15. Multi-element metallic cables used in analogue هندسة كهربائوة
and digital communication and control - Part 8:
Specification for type 1 cables characterised up to
2 MHz
تبين
EN 50288-8:2012 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1 -
16.
Multi-element metallic cables used in analogue هندسة كهربائوة
and digital communication and control - Part 9-1:
Sectional specification for screened cables
characterised up to 1 000 MHz - Horizontal and
building backbone cables
تبين
EN 50288-9:2012 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1 -
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
م. فاديه عبد الغين ادم دؽرتري الؾجـة الػـقة املسئولة: 24 رقم الؾجـة الػـقة: املعدات واألجفزة الؽفربائقة الؾجـة الػـقة املسئولة:
مالحظات األولوية املدخل تاريخ االنتفاء تاريخ البدء * نوع العؿؾقة املؼرتحاملشروع الؼطاع #
17.
Multi-element metallic cables used in analogue هندسة كهربائوة
and digital communication and control - Part 10-
1: Sectional specification for screened cables
characterized up to 500 MHz - Horizontal floor
and building backbone cables
تبين
EN 50288-10-
1:2012
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1 -
18.
Multi-element metallic cables used in analogue هندسة كهربائوة
and digital communication and control - Part 11-
1: Sectional specification for un-screened cables
characterised up to 500 MHz - Horizontal and
building backbone cables
تبين
EN 50288-11-
1:2012
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1 -
19. Cables for indoor residential telecommunication هندسة كهربائوة
installations – Part 1: Unscreened cables – Grade
1
تبين
EN 50441-1:2012 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1/2013-50441سحب م ق أ 1
20. Cables for indoor residential telecommunication هندسة كهربائوة
installations – Part 2: Unscreened cables – Grade
2
تبين
EN 50441-2:2012 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
2/2013-50441سحب م ق أ 1
21. Cables for indoor residential telecommunication هندسة كهربائوة
installations - Part 4: Cables up to 1 200 MHz -
Grade
تبين
EN 50441-4:2012 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1 -
22.
General requirements for Home and Building هندسة كهربائوة
Electronic Systems (HBES) and Building
Automation and Control Systems (BACS) - Part
4-1: General functional safety requirements for
products intended to be integrated in Building
Electronic Systems (HBES) and Building
Automation and Control Systems (BACS)
تبين
EN 50491-4-1:2012 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1 -
23.
Electric cables - Low voltage energy cables of هندسة كهربائوة
rated voltages up to and including 450/750 V
(U<(Index)0>/U) - Part 2-11: Cables for general
applications - Flexible cables with thermoplastic
PVC insulation
تبين
EN 50525-2-11:2011
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1 -
24.
Electric cables - Low voltage energy cables of هندسة كهربائوة
rated voltages up to and including 450/750 V
(U<(Index)0>/U) - Part 2-12: Cables for general
applications - Cables with thermoplastic PVC
insulation for extensible leads
تبين
EN 50525-2-12:2011
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1 -
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
م. فاديه عبد الغين ادم دؽرتري الؾجـة الػـقة املسئولة: 24 رقم الؾجـة الػـقة: املعدات واألجفزة الؽفربائقة الؾجـة الػـقة املسئولة:
مالحظات األولوية املدخل تاريخ االنتفاء تاريخ البدء * نوع العؿؾقة املؼرتحاملشروع الؼطاع #
25.
Electric cables - Low voltage energy cables of كهربائوةهندسة
rated voltages up to and including 450/750 V
(U<(Index)0>/U) - Part 2-21: Cables for general
applications - Flexible cables with crosslinked
elastomeric insulation
تبين
EN 50525-2-21:2011
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1 -
26.
Electric cables - Low voltage energy cables of هندسة كهربائوة
rated voltages up to and including 450/750 V
(U<(Index)0>/U) - Part 2-22: Cables for general
applications - High flexible braided cables with
crosslinked elastomeric insulation
تبين
EN 50525-2-22:2011
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1 -
27.
Electric cables - Low voltage energy cables of هندسة كهربائوة
rated voltages up to and including 450/750 V
(U<(Index)0>/U) - Part 2-31: Cables for general
applications - Single core non-sheathed cables
with thermoplastic PVC insulation
تبين
EN 50525-2-31:2011
اتفاقوة الشراكة متطلبات 31/12/2013 1/1/2013
األوروبوة –األردنوة
1 -
28.
Electric cables - Low voltage energy cables of هندسة كهربائوة
rated voltages up to and including 450/750 V
(U<(Index)0>/U) - Part 2-41: Cables for general
applications - Single core cables with crosslinked
silicone rubber insulation
تبين
EN 50525-2-41:2011
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1 -
29.
Electric cables - Low voltage energy cables of هندسة كهربائوة
rated voltages up to and including 450/750 V
(U<(Index)0>/U) - Part 2-42: Cables for general
applications - Single core non-sheathed cables
with crosslinked EVA insulation
تبين
EN 50525-2-42:2011
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1 -
30.
Electric cables - Low voltage energy cables of هندسة كهربائوة
rated voltages up to and including 450/750 V
(U<(Index)0>/U) - Part 2-51: Cables for general
applications - Oil resistant control cables with
thermoplastic PVC insulation
تبين
EN 50525-2-51:2011
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1 -
31.
Electric cables - Low voltage energy cables of هندسة كهربائوة
rated voltages up to and including 450/750 V
(U<(Index)0>/U) - Part 2-71: Cables for general
applications - Flat tinsel cables (cords) with
thermoplastic PVC insulation
تبين
EN 50525-2-71:2011
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1 -
32.
Electric cables - Low voltage energy cables of هندسة كهربائوة
rated voltages up to and including 450/750 V
(U<(Index)0>/U) - Part 2-72: Cables for general
applications - Flat divisible cables (cords) with
thermoplastic PVC insulation
تبين
EN 50525-2-72:2011
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1 -
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
م. فاديه عبد الغين ادم دؽرتري الؾجـة الػـقة املسئولة: 24 رقم الؾجـة الػـقة: املعدات واألجفزة الؽفربائقة الؾجـة الػـقة املسئولة:
مالحظات األولوية املدخل تاريخ االنتفاء تاريخ البدء * نوع العؿؾقة املؼرتحاملشروع الؼطاع #
33.
Electric cables - Low voltage energy cables of هندسة كهربائوة
rated voltages up to and including 450/750 V
(U<(Index)0>/U) - Part 2-81: Cables for general
applications - Cables with crosslinked elastomeric
covering for arc welding
تبين
EN 50525-2-81:2011
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1 -
34.
Electric cables - Low voltage energy cables of هندسة كهربائوة
rated voltages up to and including 450/750 V
(U<(Index)0>/U) - Part 2-82: Cables for general
applications - Cables with crosslinked elastomeric
insulation for decorative chains
تبين
EN 50525-2-82:2011
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1 -
35.
Electric cables - Low voltage energy cables of هندسة كهربائوة
rated voltages up to and including 450/750 V
(U<(Index)0>/U) - Part 2-83: Cables for general
applications - Multicore cables with crosslinked
silicone rubber insulation
تبين
EN 50525-2-83:2011
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1 -
36.
Electric cables - Low voltage energy cables of هندسة كهربائوة
rated voltages up to and including 450/750 V
(U<(Index)0>/U) - Part 3-21: Cables with special
fire performance - Flexible cables with halogen-
free crosslink insulation, and low emission of
smoke
تبين
EN 50525-3-21:2011
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1 -
37.
Electric cables - Low voltage energy cables of هندسة كهربائوة
rated voltages up to and including 450/750 V
(U<(Index)0>/U) - Part 3-31: Cables with special
fire performance - Single core non-sheathed
cables with halogen-free thermoplastic insulation,
and low emission of smoke
تبين
EN 50525-3-31:2011
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1 -
38.
Electric cables - Low voltage energy cables of هندسة كهربائوة
rated voltages up to and including 450/750 V
(U<(Index)0>/U) - Part 3-41: Cables with special
fire performance - Single core non-sheathed
cables with halogen-free crosslinked insulation,
and low emission of smoke
تبين
EN 50525-3-41:2011
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1 -
39. هندسة كهربائوة
Power frequency overvoltage protective device for household and similar applications (POP)
تعدول
EN 50550:2011 اتفاقوة الشراكة متطلبات 31/12/2013 1/1/2013
األوروبوة –األردنوة
50550/2012سحب م ق أ 1
40. هندسة كهربائوة
Road traffic signal systems
تبين
EN 50556:2011 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1 -
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
م. فاديه عبد الغين ادم دؽرتري الؾجـة الػـقة املسئولة: 24 رقم الؾجـة الػـقة: املعدات واألجفزة الؽفربائقة الؾجـة الػـقة املسئولة:
مالحظات األولوية املدخل تاريخ االنتفاء تاريخ البدء * نوع العؿؾقة املؼرتحاملشروع الؼطاع #
41. Requirements for automatic reclosing devices هندسة كهربائوة
(ARDs) for circuit breakers-RCBOs- RCCBs for household and similar uses
تبين
EN 50557:2011 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1 -
42. هندسة كهربائوة
Rotating electrical machines - Part 1: Rating and
performance
تعدول
EN 60034-1:2010 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1/2008-60034سحب م ق أ 1
43. Lamp caps and holders together with gauges for هندسة كهربائوة
the control of interchangeability and safety- Part
1: Lamp caps
تبين
EN 60061-1:1993 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1 -
44. Lamp caps and holders together with gauges for هندسة كهربائوة
the control of interchangeability and safety- Part
2: Lampholders
تبين
EN 60061-2:1993 الشراكة متطلبات اتفاقوة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1 -
45. Lamp caps and holders together with gauges for هندسة كهربائوة
the control of interchangeability and safety- Part
3: Gauges
تبين
EN 60061-3:1993 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1 -
46. Lamp caps and holders together with gauges for كهربائوةهندسة
the control of interchangeability and safety- Part
4: guidelines and general Informations
تبين
EN 60061-4:1992 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1 -
47. - Audio, video and similar electronic apparatus هندسة كهربائوة
Safety requirements
تعديل
EN 60065:2002 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
60065/2008سحب م ق أ 1
48. Miniature fuses - Part 1: Definitions for miniature هندسة كهربائوة
fuses and general requirements for miniature fuse-
links
تعديل
EN 60127-1:2006 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1/2009-60127سحب م ق أ 1
49. تعديل Miniatur fuses - Part 2: Cartridge fuse-links هندسة كهربائوة
EN 60127-2:2003 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
2/2009-60127سحب م ق أ 1
50. -Miniature fuses - Part 4: Universal Modular Fuse هندسة كهربائوة
links (UMF) (Through-hole and surface mount types)
تعديل
EN 60127-4:2005 الشراكة متطلبات اتفاقوة 31/12/2013 1/1/2013
األوروبوة –األردنوة
4/2008-60127سحب م ق أ 1
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
م. فاديه عبد الغين ادم دؽرتري الؾجـة الػـقة املسئولة: 24 رقم الؾجـة الػـقة: املعدات واألجفزة الؽفربائقة الؾجـة الػـقة املسئولة:
مالحظات األولوية املدخل تاريخ االنتفاء تاريخ البدء * نوع العؿؾقة املؼرتحاملشروع الؼطاع #
51. :Series capacitors for power systems - Part 2 هندسة كهربائوة
Protective equipment for series capacitor banks
تبين
EN 60143-2:2013
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
2/2010-60143م ق أ سحب 1
52. Safety of machinery - Electrical equipment of هندسة كهربائوة
machines - Part 1: General requirements
تعديل
EN 60204-1:2006 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1/2009-60204سحب م ق أ 1
53. :Series capacitors for power systems - Part 2 هندسة كهربائوة
Protective equipment for series capacitor banks
تبني
EN 60204-32:2006 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1 -
54. تعديل Edison screw lampholders هندسة كهربائوة
EN 60238:2004 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
60238/2010سحب م ق أ 1
55.
- AC motor capacitors - Part 1: General هندسة كهربائوةPerformance, testing and rating - Safety requirements - Guide for installation and operation
تعديل
EN 60252-1:2011 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1/2008-60252سحب م ق أ 1
56. AC motor capacitors - Part 2: Motor start هندسة كهربائوة
capacitors
تعديل
EN 60252-2:2011 1/1/2013 31/12/2013 متطلبات اتفاقوة الشراكة
األوروبوة –األردنوة
2/2008-60252ق أ سحب م 1
57. تعديل Low-voltage fuses - Part 1: General requirements هندسة كهربائوة
EN 60269-1:2007 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1/2010-60269سحب م ق أ 1
58. Low-voltage fuses - Part 4: Supplementary هندسة كهربائوة
requirements for fuse-links for the protection of semiconductor devices
تعديل
EN 60269-4:2009 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
4/2010-60269سحب م ق أ 1
59. Low-voltage fuses - Part 6: Supplementary هندسة كهربائوة
requirements for fuse-links for the protection of solar photovoltaic energy systems
تبني
EN 60269-6:2011 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1 -
60. Plugs, socket-outlets and couplers for industrial هندسة كهربائوة
purposes - Part 1: General requirements
تعديل
EN 60309-1:1999 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1/2007-60309سحب م ق أ 1
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
م. فاديه عبد الغين ادم دؽرتري الؾجـة الػـقة املسئولة: 24 رقم الؾجـة الػـقة: املعدات واألجفزة الؽفربائقة الؾجـة الػـقة املسئولة:
مالحظات األولوية املدخل تاريخ االنتفاء تاريخ البدء * نوع العؿؾقة املؼرتحاملشروع الؼطاع #
61.
Plugs, socket-outlets and couplers for industrial هندسة كهربائوةpurposes - Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories
تعديل
EN 60309-2:1999 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
2/2010-60309سحب م ق أ 1
62. Plugs, socket-outlets and couplers for industrial هندسة كهربائوة
purposes - Part 4: Switched socket-outlets and connectors with or without interlock
تعديل
EN 60309-4:2007 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
4/2010-60309سحب م ق أ 1
63. Tests on electric and optical fibre cables under هندسة كهربائوة
fire conditions - Part 3-10: Test for vertical flame spread of vertically-mounted bunched wires or cables - Apparatus
تبنيEN 60332-3-10:2009
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1 -
64. Tests on electric and optical fibre cables under هندسة كهربائوة
fire conditions - Part 3-21: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category A F/R
تبنيEN 60332-3-21:2009
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1 -
65. Tests on electric and optical fibre cables under هندسة كهربائوة
fire conditions - Part 3-22: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category A
تبنيEN 60332-3-22:2009
اتفاقوة الشراكة متطلبات 31/12/2013 1/1/2013
األوروبوة –األردنوة
1 -
66. Tests on electric and optical fibre cables under هندسة كهربائوة
fire conditions - Part 3-23: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category B
تبنيEN 60332-3-23:2009
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1 -
67. Tests on electric and optical fibre cables under هندسة كهربائوة
fire conditions - Part 3-24: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category C
تبنيEN 60332-3-24:2009
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1 -
68. Tests on electric and optical fibre cables under هندسة كهربائوة
fire conditions - Part 3-25: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category D
تبنيEN 60332-3-25:2009
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1 -
69. - Household and similar electrical appliances هندسة كهربائوة
Safety - Part 1: General requirements
تعديلEN 60335-1:2012
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1/2010-60335سحب م ق أ 1
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
م. فاديه عبد الغين ادم دؽرتري الؾجـة الػـقة املسئولة: 24 رقم الؾجـة الػـقة: املعدات واألجفزة الؽفربائقة الؾجـة الػـقة املسئولة:
مالحظات األولوية املدخل تاريخ االنتفاء تاريخ البدء * نوع العؿؾقة املؼرتحاملشروع الؼطاع #
70.
- Household and similar electrical appliances هندسة كهربائوةSafety - Part 2-2: Particular requirements for vacuum cleaners and water-suction cleaning appliances
تعديلEN 60335-2-2:2010
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-2-60335سحب م ق أ 1
2/2008
71. - Household and similar electrical appliances هندسة كهربائوة
Safety - Part 2-3: Particular requirements for electric irons
تعديلEN 60335-2-3:2002
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-2-60335سحب م ق أ 1
3/2009
72. - Household and similar electrical appliances هندسة كهربائوة
Safety - Part 2-4: Particular requirements for spin extractors
تعديلEN 60335-2-4:2010
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-2-60335سحب م ق أ 1
4/2008
73. - Household and similar electrical appliances هندسة كهربائوة
Safety - Part 2-5: Particular requirements for dishwashers
تعديلEN 60335-2-5:2003
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-2-60335سحب م ق أ 1
5/2012
74.
- Household and similar electrical appliances هندسة كهربائوةSafety - Part 2-6: Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances
تعديلEN 60335-2-6:2003
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-2-60335سحب م ق أ 1
6/2009
75. Household and similar electrical appliances - Part هندسة كهربائوة
2-7: Particular requirements for washing machines
تعديلEN 60335-2-7:2010
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-2-60335سحب م ق أ 1
7/2009
76. - Household and similar electrical appliances هندسة كهربائوة
Safety - Part 2-8: Particular requirements for shavers, hair clippers and similar appliances
تعديلEN 60335-2-8:2003
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-2-60335سحب م ق أ 1
8/2008
77.
- Household and similar electrical appliances هندسة كهربائوةSafety - Part 2-9: Particular requirements for grills, toasters and similar portable cooking appliances
تعديلEN 60335-2-9:2003
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-2-60335سحب م ق أ 1
9/2012
78.
- Household and similar electrical appliances هندسة كهربائوةSafety - Part 2-10: Particular requirements for floor treatment machines and wet scrubbing machines
تعديلEN 60335-2-10:2003
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-2-60335سحب م ق أ 1
10/2009
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
م. فاديه عبد الغين ادم دؽرتري الؾجـة الػـقة املسئولة: 24 رقم الؾجـة الػـقة: املعدات واألجفزة الؽفربائقة الؾجـة الػـقة املسئولة:
مالحظات األولوية املدخل تاريخ االنتفاء تاريخ البدء * نوع العؿؾقة املؼرتحاملشروع الؼطاع #
79. - Household and similar electrical appliances هندسة كهربائوة
Safety - Part 2-11: Particular requirements for tumble dryers
تعديلEN 60335-2-11:2010
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-2-60335سحب م ق أ 1
11/2010
80. - Household and similar electrical appliances هندسة كهربائوة
Safety - Part 2-12: Particular requirements for warming plates and similar appliances
تعديلEN 60335-2-12:2003
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-2-60335سحب م ق أ 1
12/2009
81. - Household and similar electrical appliances هندسة كهربائوة
Safety - Part 2-13: Particular requirements for deep fat fryers, frying pans and similar appliances
تعديلEN 60335-2-13:2010
الشراكة متطلبات اتفاقوة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-2-60335سحب م ق أ 1
13/2009
82. - Household and similar electrical appliances هندسة كهربائوة
Safety - Part 2-14: Particular requirements for kitchen machines
تعديلEN 60335-2-14:2006
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-2-60335سحب م ق أ 1
14/2009
83. - Household and similar electrical appliances هندسة كهربائوة
Safety - Part 2-15: Particular requirements for appliances for heating liquids
تعديلEN 60335-2-15:2002
الشراكة متطلبات اتفاقوة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-2-60335سحب م ق أ 1
15/2008
84. - Household and similar electrical appliances هندسة كهربائوة
Safety - Part 2-16: Particular requirements for food waste disposers
تعديلEN 60335-2-16:2003
الشراكة متطلبات اتفاقوة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-2-60335سحب م ق أ 1
16/2009
85.
- Household and similar electrical appliances هندسة كهربائوةSafety - Part 2-17: Particular requirements for blankets, pads and similar flexible heating appliances
تعديلEN 60335-2-17:2013
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-2-60335سحب م ق أ 1
17/2009
86. - Household and similar electrical appliances هندسة كهربائوة
Safety - Part 2-21: Particular requirements for storage water heaters
تعديلEN 60335-2-21:2003
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-2-60335سحب م ق أ 1
21/2008
87. - Household and similar electrical appliances هندسة كهربائوة
Safety - Part 2-23: Particular requirements for appliances for skin or hair care
تعديلEN 60335-2-23:2003
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-2-60335سحب م ق أ 1
23/2009
88.
- Household and similar electrical appliances هندسة كهربائوةSafety - Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice makers
تعديلEN 60335-2-24:2010
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-2-60335سحب م ق أ 1
24/2008
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
م. فاديه عبد الغين ادم دؽرتري الؾجـة الػـقة املسئولة: 24 رقم الؾجـة الػـقة: املعدات واألجفزة الؽفربائقة الؾجـة الػـقة املسئولة:
مالحظات األولوية املدخل تاريخ االنتفاء تاريخ البدء * نوع العؿؾقة املؼرتحاملشروع الؼطاع #
89.
- Household and similar electrical appliances هندسة كهربائوةSafety - Part 2-25: Particular requirements for microwave ovens, including combination microwave ovens
تعديلEN 60335-2-25:2012
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-2-60335سحب م ق أ 1
25/2008
90. - Household and similar electrical appliances هندسة كهربائوة
Safety - Part 2-26: Particular requirements for
clocks
تعديلEN 60335-2-26:2003
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-2-60335سحب م ق أ 1
26/2008
91. - Household and similar electrical appliances هندسة كهربائوة
Safety - Part 2-28: Particular requirements for sewing machines
تعديلEN 60335-2-28:2003
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-2-60335سحب م ق أ 1
28/2009
92. - Household and similar electrical appliances هندسة كهربائوة
Safety - Part 2-29: Particular requirements for battery chargers
تعديلEN 60335-2-29:2004
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-2-60335سحب م ق أ 1
29/2008
93. - Household and similar electrical appliances هندسة كهربائوة
Safety - Part 2-30: Particular requirements for room heaters
تعديلEN 60335-2-30:2009
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-2-60335سحب م ق أ 1
30/2008
94. - Household and similar electrical appliances هندسة كهربائوة
Safety - Part 2-31: Particular requirements for range hoods
تعديلEN 60335-2-31:2003
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-2-60335سحب م ق أ 1
31/2010
95. - Household and similar electrical appliances هندسة كهربائوة
Safety - Part 2-32: Particular requirements for
massage appliances
تعديلEN 60335-2-32:2003
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-2-60335سحب م ق أ 1
32/2009
96. - Household and similar electrical appliances هندسة كهربائوة
Safety - Part 2-34: Particular requirements for motor-compressor
تبنيEN 60335-2-34:2013
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-2-60335سحب م ق أ 1
34/2012
97. - Household and similar electrical appliances هندسة كهربائوة
Safety - Part 2-35: Particular requirements for instantaneous water heaters
تعديلEN 60335-2-35:2002
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-2-60335سحب م ق أ 1
35/2008
98. - Household and similar electrical appliances هندسة كهربائوة
Safety - Part 2-37: Particular requirements for commercial electric deep fat fryers
تعديلEN 60335-2-37:2002
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-2-60335سحب م ق أ 1
37/2008
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
م. فاديه عبد الغين ادم دؽرتري الؾجـة الػـقة املسئولة: 24 رقم الؾجـة الػـقة: املعدات واألجفزة الؽفربائقة الؾجـة الػـقة املسئولة:
مالحظات األولوية املدخل تاريخ االنتفاء تاريخ البدء * نوع العؿؾقة املؼرتحاملشروع الؼطاع #
99.
- Household and similar electrical appliances هندسة كهربائوةSafety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers
تعديلEN 60335-2-40:2003
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-2-60335سحب م ق أ 1
40/2012
100. - Household and similar electrical appliances هندسة كهربائوة
Safety - Part 2-41: Particular requirements for pumps
تعديلEN 60335-2-41:2003
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-2-60335سحب م ق أ 1
41/2008
101.
- Household and similar electrical appliances هندسة كهربائوةSafety - Part 2-42: Particular requirements for commercial electric forced convection ovens, steam cookers and steam-convection oven
تعديلEN 60335-2-42:2003
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-2-60335سحب م ق أ 1
42/2007
102. - Household and similar electrical appliances هندسة كهربائوة
Safety - Part 2-43: Particular requirements for clothes dryers and towel rails
تعديلEN 60335-2-43:2003
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-2-60335سحب م ق أ 1
43/2008
103. - Household and similar electrical appliances هندسة كهربائوة
Safety - Part 2-44: Particular requirements for ironers
تعديلEN 60335-2-44:2002
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-2-60335سحب م ق أ 1
44/2009
104. - Household and similar electrical appliances هندسة كهربائوة
Safety - Part 2-45: Particular requirements for portable heating tools and similar appliances
تعديلEN 60335-2-45:2002
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-2-60335سحب م ق أ 1
45/2009
105. - Household and similar electrical appliances هندسة كهربائوة
Safety - Part 2-47: Particular requirements for commercial electric boiling pans
تعديلEN 60335-2-47:2003
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-2-60335سحب م ق أ 1
47/2007
106. - Household and similar electrical appliances هندسة كهربائوة
Safety - Part 2-48: Particular requirements for commercial electric grillers and toasters
تعديلEN 60335-2-48:2003
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-2-60335سحب م ق أ 1
48/2007
107. - Household and similar electrical appliances هندسة كهربائوة
Safety - Part 2-49: Particular requirements for commercial electric hot cupboards
تعديلEN 60335-2-49:2003
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-2-60335سحب م ق أ 1
49/2007
108.
- Household and similar electrical appliances هندسة كهربائوةSafety - Part 2-51: Particular requirements for stationary circulation pumps for heating and service water installations
تعديلEN 60335-2-51:2003
اتفاقوة الشراكة متطلبات 31/12/2013 1/1/2013
األوروبوة –األردنوة
-2-60335سحب م ق أ 1
51/2009
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
م. فاديه عبد الغين ادم دؽرتري الؾجـة الػـقة املسئولة: 24 رقم الؾجـة الػـقة: املعدات واألجفزة الؽفربائقة الؾجـة الػـقة املسئولة:
مالحظات األولوية املدخل تاريخ االنتفاء تاريخ البدء * نوع العؿؾقة املؼرتحاملشروع الؼطاع #
109. - Household and similar electrical appliances هندسة كهربائوة
Safety - Part 2-52: Particular requirements for oral hygiene appliances
تعديلEN 60335-2-52:2003
اتفاقوة الشراكة متطلبات 31/12/2013 1/1/2013
األوروبوة –األردنوة
-2-60335سحب م ق أ 1
52/2009
110. - Household and similar electrical appliances هندسة كهربائوة
Safety - Part 2-53: Particular requirements for sauna heating appliances
تبنيEN 60335-2-53:2011
اتفاقوة الشراكة متطلبات 31/12/2013 1/1/2013
األوروبوة –األردنوة
-2-60335سحب م ق أ 1
53/2008
111.
- Household and similar electrical appliances هندسة كهربائوةSafety - Part 2-54: Particular requirements for surface-cleaning appliances for household use employing liquids or steam
تعديلEN 60335-2-54:2008
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-2-60335سحب م ق أ 1
54/2010
112.
- Household and similar electrical appliances هندسة كهربائوةSafety - Part 2-55: Particular requirements for electrical appliances for use with aquariums and garden ponds
تعديلEN 60335-2-55:2003
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-2-60335سحب م ق أ 1
55/2009
113. - Household and similar electrical appliances هندسة كهربائوة
Safety - Part 2-56: Particular requirements for projectors and similar appliances
تعديلEN 60335-2-56:2003
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-2-60335سحب م ق أ 1
56/2009
114. - Household and similar electrical appliances هندسة كهربائوة
Safety - Part 2-59: Particular requirements for insect killers
تعديلEN 60335-2-59:2003
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-2-60335سحب م ق أ 1
59/2008
115. - Household and similar electrical appliances هندسة كهربائوة
Safety - Part 2-60: Particular requirements for whirlpool baths
تعديلEN 60335-2-60:2003
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-2-60335سحب م ق أ 1
60/2008
116. - Household and similar electrical appliances هندسة كهربائوة
Safety - Part 2-61: Particular requirements for thermal-storage heaters
تعديلEN 60335-2-61:2003
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-2-60335سحب م ق أ 1
61/2008
117. - Household and similar electrical appliances هندسة كهربائوة
Safety - Part 2-65: Particular requirements for air-cleaning appliances
تعديلEN 60335-2-65:2003
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-2-60335سحب م ق أ 1
65/2009
118. - Household and similar electrical appliances هندسة كهربائوة
Safety - Part 2-66: Particular requirements for water-bed heaters
تعديلEN 60335-2-66:2003
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-2-60335سحب م ق أ 1
66/2009
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
م. فاديه عبد الغين ادم دؽرتري الؾجـة الػـقة املسئولة: 24 رقم الؾجـة الػـقة: املعدات واألجفزة الؽفربائقة الؾجـة الػـقة املسئولة:
مالحظات األولوية املدخل تاريخ االنتفاء تاريخ البدء * نوع العؿؾقة املؼرتحاملشروع الؼطاع #
119. - Household and similar electrical appliances هندسة كهربائوة
Safety - Part 2-73: Particular requirements for fixed immersion heaters
تعديلEN 60335-2-73:2003
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-2-60335سحب م ق أ 1
73/2008
120. - Household and similar electrical appliances هندسة كهربائوة
Safety - Part 2-74: Particular requirements for portable immersion heaters
تعديلEN 60335-2-74:2003
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-2-60335سحب م ق أ 1
74/2007
121. - Household and similar electrical appliances هندسة كهربائوة
Safety - Part 2-78: Particular requirements for outdoor barbecues
تعديلEN 60335-2-78:2003
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-2-60335سحب م ق أ 1
78/2009
122. - Household and similar electrical appliances هندسة كهربائوة
Safety - Part 2-81: Particular requirements for foot warmers and heating mats
تعديلEN 60335-2-81:2003
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-2-60335سحب م ق أ 1
81/2008
123.
- Household and similar electrical appliances هندسة كهربائوةSafety - Part 2-82: Particular requirements for amusement machines and personal service machines
تعديلEN 60335-2-82:2003
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-2-60335سحب م ق أ 1
82/2009
124. - Household and similar electrical appliances هندسة كهربائوة
Safety - Part 2-83: Particular requirements for heated gullies for roof drainage
تعديلEN 60335-2-83:2002
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-2-60335سحب م ق أ 1
83/2009
125. - Household and similar electrical appliances هندسة كهربائوة
Safety - Part 2-84: Particular requirements for toilets
تعديلEN 60335-2-84:2003
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-2-60335سحب م ق أ 1
84/2009
126. - Household and similar electrical appliances هندسة كهربائوة
Safety - Part 2-85: Particular requirements for fabric steamers
تعديلEN 60335-2-85:2003
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-2-60335سحب م ق أ 1
85/2009
127. - Household and similar electrical appliances هندسة كهربائوة
Safety - Part 2-87: Particular requirements for electric animal-stunning equipment
تعديلEN 60335-2-87:2002
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-2-60335سحب م ق أ 1
87/2009
128. - Household and similar electrical appliances هندسة كهربائوة
Safety - Part 2-90: Particular requirements for commercial microwave ovens
تعديلEN 60335-2-90:2006
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-2-60335سحب م ق أ 1
90/2009
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
م. فاديه عبد الغين ادم دؽرتري الؾجـة الػـقة املسئولة: 24 رقم الؾجـة الػـقة: املعدات واألجفزة الؽفربائقة الؾجـة الػـقة املسئولة:
مالحظات األولوية املدخل تاريخ االنتفاء تاريخ البدء * نوع العؿؾقة املؼرتحاملشروع الؼطاع #
129.
- Household and similar electrical appliances هندسة كهربائوةSafety - Part 2-96: Particular requirements for flexible sheet heating elements for room heating
تعديلEN 60335-2-96:2002
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-2-60335سحب م ق أ 1
96/2008
130.
- Household and similar electrical appliances هندسة كهربائوةSafety - Part 2-97: Particular requirements for drives for rolling shutters, awnings, blinds and similar equipment
تعديلEN 60335-2-97:2006
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-2-60335سحب م ق أ 1
97/2012
131. - Household and similar electrical appliances هندسة كهربائوة
Safety - Part 2-98: Particular requirements for humidifiers
تعديلEN 60335-2-98:2003
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-2-60335سحب م ق أ 1
98/2009
132. - Household and similar electrical appliances هندسة كهربائوة
Safety - Part 2-101: Particular requirements for vaporizers
تعديلEN 60335-2-
101:2002
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-2-60335سحب م ق أ 1
101/2009
133.
- Household and similar electrical appliances هندسة كهربائوةSafety - Part 2-102: Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections
تعديلEN 60335-2-
102:2006
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-2-60335سحب م ق أ 1
102/2010
134. - Household and similar electrical appliances هندسة كهربائوة
Safety - Part 2-105: Particular requirements for multifunction shower cabinets
تعديلEN 60335-2-
105:2005
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-2-60335م ق أ سحب 1
105/2009
135. - Household and similar electrical appliances هندسة كهربائوة
Safety - Part 2-108: Particular requirements for electrolysers
تبني
EN 60335-2-
108:2008
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1 -
136. - Household and similar electrical appliances كهربائوةهندسة
Safety - Part 2-109: Particular requirements for UV radiation water treatment appliances
تبني
EN 60335-2-
109:2010
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1 -
137. Coupling capacitors and capacitor dividers - Part هندسة كهربائوة
1: General rules
تبني
EN 60358-1:2012 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1 -
138. Lampholders for tubular fluorescent lamps and هندسة كهربائوة
starterholders
تعديلEN 60400:2008
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
60400/2010سحب م ق أ 1
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
م. فاديه عبد الغين ادم دؽرتري الؾجـة الػـقة املسئولة: 24 رقم الؾجـة الػـقة: املعدات واألجفزة الؽفربائقة الؾجـة الػـقة املسئولة:
مالحظات األولوية املدخل تاريخ االنتفاء تاريخ البدء * نوع العؿؾقة املؼرتحاملشروع الؼطاع #
139. Incandescent lamps - Safety specifications - Part هندسة كهربائوة
1: Tungsten filament lamps for domestic and similar general lighting purposes
تعديلEN 60432-1:2000
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1/2007-60432سحب م ق أ 1
140. Incandescent lamps - Safety specifications - Part هندسة كهربائوة
1: Tungsten filament lamps for domestic and similar general lighting purposes
تعديلEN 60432-2:2000
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
2/2007-60432سحب م ق أ 1
141. Incandescent lamps - Safety specifications - Part هندسة كهربائوة
3: Tungsten halogen lamps
تبني
EN 60432-3:2013 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
3/2007-60432سحب م ق أ 1
142. :Safety in electroheating installations - Part 1 هندسة كهربائوة
General requirements
تعديلEN 60519-1:2011
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1/2008-60519سحب م ق أ 1
143. :Safety in electroheat installations - Part 6 كهربائوةهندسة
Specifications for safety in industrial microwave heating equipment
تعديلEN 60519-6:2011
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
6/2008-60519سحب م ق أ 1
144. :Safety in electroheat installations - Part 7 هندسة كهربائوة
Particular requirements for installations with electron guns
تبنيEN 60519-7:2008
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1 -
145.
:Safety in electroheat installations - Part 10 هندسة كهربائوةParticular requirements for electrical resistance trace heating for industrial and commercial applications
تبنيEN 60519-10:2013
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-60519سحب م ق أ 1
10/2010
146. Luminaires - Part 1: General requirements and كهربائوةهندسة
tests
تعديلEN 60598-1:2008
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1/2008-60598سحب م ق أ 1
147. - Luminaires - Part 2: Particular requirements هندسة كهربائوة
Section 2: Recessed luminaires
تبنيEN 60598-2-2:2012
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-2-60598سحب م ق أ 1
2/2008
148. ;Luminaires - Part 2-3: Particular requirements هندسة كهربائوة
Luminaires for road and street lighting
تعديلEN 60598-2-3:2003
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-2-60598سحب م ق أ 1
3/2009
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
م. فاديه عبد الغين ادم دؽرتري الؾجـة الػـقة املسئولة: 24 رقم الؾجـة الػـقة: املعدات واألجفزة الؽفربائقة الؾجـة الػـقة املسئولة:
مالحظات األولوية املدخل تاريخ االنتفاء تاريخ البدء * نوع العؿؾقة املؼرتحاملشروع الؼطاع #
149. - Luminaires - Part 2-13: Particular requirements هندسة كهربائوة
Ground recessed luminaires
تعديلEN 60598-2-13:2003
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-2-60598سحب م ق أ 1
13/2009
150. — Luminaires — Part 2: Particular requirements هندسة كهربائوة
Section 14: Ground recessed luminaires
تبني
EN 60598-2-
14:2009
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1 -
151. - Luminaires - Part 2-20: Particular requirements كهربائوةهندسة
Lighting chains
تعديلEN 60598-2-20:2010
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-2-60598سحب م ق أ 1
20/2008
152. - Luminaires - Part 2-22: Particular requirements هندسة كهربائوة
Luminaires for emergency lighting
تعديلEN 60598-2-22:1998
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-2-60598سحب م ق أ 1
22/2009
153. Electroacoustics - Audiometric equipment - Part هندسة كهربائوة
6: Instruments for the measurement of otoacoustic emissions
تبني
EN 60645-6:2010 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1 -
154. Electroacoustics - Audiometric equipment - Part هندسة كهربائوة
7: Instruments for the measurement of auditory brainstem responses
تبني
EN 60645-7:2010 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1 -
155. -Switches for household and similar fixed هندسة كهربائوة
electrical installations - Part 1: General requirements
تبني
EN 60669-1:1999 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
سحب القاعدة الفنوة 1
1545/2004
156. Switches for household and similar fixed هندسة كهربائوة
electrical installations - Part 2-1: Particular requirements - Electronic switches
تعديل
EN 60669-2-1:2004 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-2-60669سحب م ق أ 1
1/2009
157.
Switches for household and similar fixed هندسة كهربائوةelectrical installations - Part 2-6: Particular requirements - Fireman's switches for exterior and interior signs and luminaires
تبني
EN 60669-2-6:2012 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
50425/2009سحب م ق أ 1
158. Boxes and enclosures for elctrical accessories for هندسة كهربائوة
household and similar fixed electrical installations - Part 1: General requirements
تعديل
EN 60670-1:2004 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1/2008-60670سحب م ق أ 1
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
م. فاديه عبد الغين ادم دؽرتري الؾجـة الػـقة املسئولة: 24 رقم الؾجـة الػـقة: املعدات واألجفزة الؽفربائقة الؾجـة الػـقة املسئولة:
مالحظات األولوية املدخل تاريخ االنتفاء تاريخ البدء * نوع العؿؾقة املؼرتحاملشروع الؼطاع #
159.
Boxes and enclosures for electrical accessories كهربائوةهندسة for household and similar fixed electrical installations - Part 24: Particular requirements for enclosures for housing protective devices and other power dissipating electrical equipment
تبني
EN 60670-24:2013 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1 -
160. Electrical measuring transducers for converting هندسة كهربائوة
A.C. and D.C. electrical quantities to analogue or digital signals
تبني
EN 60688:2013 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1 -
161. Thermal-links - Requirements and application هندسة كهربائوة
guide
تعديل
EN 60691:2003 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
60691/2008سحب م ق أ 1
162. Fire hazard testing - Part 11-2: Test flames - 500 هندسة كهربائوة
W flame - Apparatus and confirmational test methods
تبني
EN 60695-11-
3:2012
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1 -
163. Fire hazard testing - Part 11-4: Test flames - 50 W هندسة كهربائوة
flame - Apparatus and confirmational test method
تبني
EN 60695-11-
4:2011
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1 -
164. Cable networks for television signals, sound هندسة كهربائوة
signals and interactive services - Part 11: Safety
تعديل
EN 60728-11:2010 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-60728سحب م ق أ 1
11/2008
165. Automatic electrical controls for household and هندسة كهربائوة
similar use - Part 1: General requirements
تعديل
EN 60730-1:2011 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1/2009-60730سحب م ق أ 1
166. Automatic electrical controls for household and هندسة كهربائوة
similar use - Part 2-5: Particular requirements for automatic electrical burner control systems
تعديل
EN 60730-2-5:2002 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-2-60730سحب م ق أ 1
5/2008
167. Automatic electrical controls for household and هندسة كهربائوة
similar use - Part 2-7: Particular requirements for timers and time switches
تعديل
EN 60730-2-7:2010 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-2-60730سحب م ق أ 1
7/2012
168. Automatic electrical controls for household and هندسة كهربائوة
similar use - Part 2-9: Particular requirements for temperature sensing controls
تعديل
EN 60730-2-9:2010 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-2-60730سحب م ق أ 1
9/2009
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
م. فاديه عبد الغين ادم دؽرتري الؾجـة الػـقة املسئولة: 24 رقم الؾجـة الػـقة: املعدات واألجفزة الؽفربائقة الؾجـة الػـقة املسئولة:
مالحظات األولوية املدخل تاريخ االنتفاء تاريخ البدء * نوع العؿؾقة املؼرتحاملشروع الؼطاع #
169.
Automatic electrical controls for household and هندسة كهربائوةsimilar use - Part 2: Particular requirements for automatic electrical air flow, water flow and water level sensing controls
تعديل
EN 60730-2-
15:2010
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-2-60730سحب م ق أ 1
15/2009
170.
Electric and optical fibre cables - Test methods هندسة كهربائوةfor non-metallic materials - Part 100: General
تبني
EN 60811-100:2012 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
سحب املواصفات القواسوة 1
األردنوة التالوة:
60811-1-1/2007
60811-1-1/2007
60811-1-3/2007
60811-1-4/2007
60811-2-1/2010
60811-3-1/2007
60811-3-2/2007
60811-4-1/2007
60811-4-2/2007
60811-5-1/2007
171. Electric and optical fibre cables - Test methods هندسة كهربائوة
for non-metallic materials - Part 201: General tests - Measurement of insulation thickness
تبني
EN 60811-201:2012 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
سحب م ق أ 1
60811-1-1/2007
172.
Electric and optical fibre cables - Test methods هندسة كهربائوةfor non-metallic materials - Part 202: General tests - Measurement of thickness of non-metallic sheath
تبني
EN 60811-202:2012 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
سحب م ق أ 1
60811-1-1/2007
173. Electric and optical fibre cables - Test methods هندسة كهربائوة
for non-metallic materials - Part 203: General tests - Measurement of overall dimensions
تبني
EN 60811-203:2012 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
سحب م ق أ 1
60811-1-1/2007
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
م. فاديه عبد الغين ادم دؽرتري الؾجـة الػـقة املسئولة: 24 رقم الؾجـة الػـقة: املعدات واألجفزة الؽفربائقة الؾجـة الػـقة املسئولة:
مالحظات األولوية املدخل تاريخ االنتفاء تاريخ البدء * نوع العؿؾقة املؼرتحاملشروع الؼطاع #
174.
Electric and optical fibre cables - Test methods هندسة كهربائوةfor non-metallic materials - Part 301: Electrical tests - Measurement of the permittivity at 23 °C of filling compounds
تبني
EN 60811-301:2012 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
سحب م ق أ 1
60811-5-1/2007
175.
Electric and optical fibre cables - Test methods هندسة كهربائوةfor non-metallic materials - Part 302: Electrical tests - Measurement of the d.c. resistivity at 23°C and 100 °C of filling compounds
تبني
EN 60811-302:2012 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
سحب م ق أ 1
60811-5-1/2007
176.
Electric and optical fibre cables - Test methods هندسة كهربائوةfor non-metallic materials - Part 401: Miscellaneous tests - Thermal ageing methods - Ageing in an air oven
تبني
EN 60811-401:2012 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
سحب م ق أ 1
60811-1-2/2007
177. Electric and optical fibre cables - Test methods كهربائوةهندسة
for non-metallic materials - Part 402: Miscellaneous tests - Water absorption tests
تبني
EN 60811-402:2012 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
سحب م ق أ 1
60811-1-3/2007
178.
Electric and optical fibre cables - Test methods هندسة كهربائوةfor non-metallic materials - Part 403: Miscellaneous tests - Ozone resistance test on cross-linked compounds
تبني
EN 60811-403:2012 الشراكة متطلبات اتفاقوة 31/12/2013 1/1/2013
األوروبوة –األردنوة
سحب م ق أ 1
60811-2-1/2010
179.
Electric and optical fibre cables - Test methods هندسة كهربائوةfor non-metallic materials - Part 404: Miscellaneous tests - Mineral oil immersion tests for sheaths
تبني
EN 60811-404:2012 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
سحب م ق أ 1
60811-2-1/2010
180.
Electric and optical fibre cables - Test methods هندسة كهربائوةfor non-metallic materials - Part 405: Miscellaneous tests - Thermal stability test for PVC insulations and PVC sheaths
تبني
EN 60811-405:2012 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
سحب م ق أ 1
60811-3-2/2007
181.
Electric and optical fibre cables - Test methods هندسة كهربائوةfor non-metallic materials - Part 406: Miscellaneous tests - Resistance to stress cracking of polyethylene and polypropylene compounds
تبني
EN 60811-406:2012 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
سحب م ق أ 1
60811-4-1/2007
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
م. فاديه عبد الغين ادم دؽرتري الؾجـة الػـقة املسئولة: 24 رقم الؾجـة الػـقة: املعدات واألجفزة الؽفربائقة الؾجـة الػـقة املسئولة:
مالحظات األولوية املدخل تاريخ االنتفاء تاريخ البدء * نوع العؿؾقة املؼرتحاملشروع الؼطاع #
182.
Electric and optical fibre cables - Test methods هندسة كهربائوةfor non-metallic materials - Part 407: Miscellaneous tests - Measurement of mass increase of polyethylene and polypropylene compounds
تبني
EN 60811-407:2012 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
سحب م ق أ 1
60811-4-2/2007
183.
Electric and optical fibre cables - Test methods هندسة كهربائوةfor non-metallic materials - Part 408: Miscellaneous tests - Long-term stability test of polyethylene and polypropylene compounds
تبني
EN 60811-408:2012 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
سحب م ق أ 1
60811-4-2/2007
184.
Electric and optical fibre cables - Test methods هندسة كهربائوةfor non-metallic materials - Part 409: Miscellaneous tests - Loss of mass test for thermoplastic insulations and sheaths
تبني
EN 60811-409:2012 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
سحب م ق أ 1
60811-3-2/2007
185.
Electric and optical fibre cables - Test methods هندسة كهربائوةfor non-metallic materials - Part 410: Miscellaneous tests - Test method for copper-catalyzed oxidative degradation of polyolefin insulated conductors
تبني
EN 60811-410:2012 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
سحب م ق أ 1
60811-4-2/2007
186.
Electric and optical fibre cables - Test methods هندسة كهربائوةfor non-metallic materials - Part 411: Miscellaneous tests - Low-temperature brittleness of filling compounds
تبني
EN 60811-411:2012 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
سحب م ق أ 1
60811-5-1/2007
187.
Electric and optical fibre cables - Test methods هندسة كهربائوةfor non-metallic materials - Part 412: Miscellaneous tests - Thermal ageing methods - Ageing in an air bomb
تبني
EN 60811-412:2012 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
بوةاألورو –األردنوة
سحب م ق أ 1
60811-1-2/2007
188.
Electric and optical fibre cables - Test methods هندسة كهربائوةfor non-metallic materials - Part 501: Mechanical tests - Tests for determining the mechanical properties of insulating and sheathing compounds
تبني
EN 60811-501:2012 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
سحب م ق أ 1
60811-1-1/2007
189. Electric and optical fibre cables - Test methods هندسة كهربائوة
for non-metallic materials - Part 502: Mechanical tests - Shrinkage test for insulations
تبني
EN 60811-502:2012 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
سحب م ق أ 1
60811-1-3/2007
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
م. فاديه عبد الغين ادم دؽرتري الؾجـة الػـقة املسئولة: 24 رقم الؾجـة الػـقة: املعدات واألجفزة الؽفربائقة الؾجـة الػـقة املسئولة:
مالحظات األولوية املدخل تاريخ االنتفاء تاريخ البدء * نوع العؿؾقة املؼرتحاملشروع الؼطاع #
190. Electric and optical fibre cables - Test methods هندسة كهربائوة
for non-metallic materials - Part 503: Mechanical tests - Shrinkage test for sheaths
تبني
EN 60811-503:2012 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
سحب م ق أ 1
60811-1-3/2007
191.
Electric and optical fibre cables - Test methods هندسة كهربائوةfor non-metallic materials - Part 504: Mechanical tests - Bending tests at low temperature for insulation and sheaths
تبني
EN 60811-504:2012 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –ة األردنو
سحب م ق أ 1
60811-1-4/2007
192.
Electric and optical fibre cables - Test methods هندسة كهربائوةfor non-metallic materials - Part 505: Mechanical tests - Elongation at low temperature for insulations and sheaths
تبني
EN 60811-505:2012 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
سحب م ق أ 1
60811-1-4/2007
193.
Electric and optical fibre cables - Test methods هندسة كهربائوةfor non-metallic materials - Part 506: Mechanical tests - Impact test at low temperature for insulations and sheaths
تبني
EN 60811-506:2012 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
سحب م ق أ 1
60811-1-4/2007
194. Electric and optical fibre cables - Test methods هندسة كهربائوة
for non-metallic materials - Part 507: Mechanical tests - Hot set test for cross-linked materials
تبني
EN 60811-507:2012 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
سحب م ق أ 1
60811-2-1/2010
195.
Electric and optical fibre cables - Test methods هندسة كهربائوةfor non-metallic materials - Part 508: Mechanical tests - Pressure test at high temperature for insulation and sheaths
تبني
EN 60811-508:2012 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
سحب م ق أ 1
60811-3-1/2007
196.
Electric and optical fibre cables - Test methods هندسة كهربائوةfor non-metallic materials - Part 509: Mechanical tests - Test for resistance of insulations and sheaths to cracking (heat shock test)
تبني
EN 60811-509:2012 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
سحب م ق أ 1
60811-3-1/2007
197.
Electric and optical fibre cables - Test methods هندسة كهربائوةfor non-metallic materials - Part 510: Mechanical tests - Methods specific to polyethylene and polypropylene compounds - Wrapping test after thermal ageing in air
تبني
EN 60811-510:2012 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
سحب م ق أ 1
60811-4-2/2007
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
م. فاديه عبد الغين ادم دؽرتري الؾجـة الػـقة املسئولة: 24 رقم الؾجـة الػـقة: املعدات واألجفزة الؽفربائقة الؾجـة الػـقة املسئولة:
مالحظات األولوية املدخل تاريخ االنتفاء تاريخ البدء * نوع العؿؾقة املؼرتحاملشروع الؼطاع #
198.
Electric and optical fibre cables - Test methods هندسة كهربائوةfor non-metallic materials - Part 511: Mechanical tests - Measurement of the melt flow index of polyethylene compounds
تبني
EN 60811-511:2012 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
سحب م ق أ 1
60811-4-1/2007
199.
Electric and optical fibre cables - Test methods هندسة كهربائوةfor non-metallic materials - Part 512: Mechanical tests - Methods specific to polyethylene and polypropylene compounds - Tensile strength and elongation at break after conditioning at elevated temperature
تبني
EN 60811-512:2012 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
سحب م ق أ 1
60811-4-2/2007
200.
Electric and optical fibre cables - Test methods هندسة كهربائوةfor non-metallic materials - Part 513: Mechanical tests - Methods specific to polyethylene and polypropylene compounds - Wrapping test after conditioning
تبني
EN 60811-513:2012 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
سحب م ق أ 1
60811-4-2/2007
201.
Electric and optical fibre cables - Test methods هندسة كهربائوةfor non-metallic materials - Part 601: Physical tests - Measurement of the drop point of filling compounds
تبني
EN 60811-601:2012 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
سحب م ق أ 1
60811-5-1/2007
202. Electric and optical fibre cables - Test methods هندسة كهربائوة
for non-metallic materials - Part 602: Physical tests - Separation of oil in filling compounds
تبني
EN 60811-602:2012 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
سحب م ق أ 1
60811-5-1/2007
203.
Electric and optical fibre cables - Test methods هندسة كهربائوةfor non-metallic materials - Part 603: Physical tests - Measurement of total acid number of filling compounds
تبني
EN 60811-603:2012 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
سحب م ق أ 1
60811-5-1/2007
204.
Electric and optical fibre cables - Test methods هندسة كهربائوةfor non-metallic materials - Part 604: Physical tests - Measurement of absence of corrosive components in filling compounds
تبني
EN 60811-604:2012 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
سحب م ق أ 1
60811-5-1/2007
205.
Electric and optical fibre cables - Test methods هندسة كهربائوةfor non-metallic materials - Part 605: Physical tests - Measurement of carbon black and/or mineral filler in polyethylene compound
تبني
EN 60811-605:2012 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
سحب م ق أ 1
60811-4-1/2007
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
م. فاديه عبد الغين ادم دؽرتري الؾجـة الػـقة املسئولة: 24 رقم الؾجـة الػـقة: املعدات واألجفزة الؽفربائقة الؾجـة الػـقة املسئولة:
مالحظات األولوية املدخل تاريخ االنتفاء تاريخ البدء * نوع العؿؾقة املؼرتحاملشروع الؼطاع #
206. Electric and optical fibre cables - Test methods هندسة كهربائوة
for non-metallic materials - Part 606: Physical tests - Methods for determining the density
تبني
EN 60811-606:2012 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
سحب م ق أ 1
60811-1-3/2007
207.
Electric and optical fibre cables - Test methods هندسة كهربائوةfor non-metallic materials - Part 607: Physical tests - Test for the assessment of carbon black dispersion in polyethylene and polypropylene
تبني
EN 60811-607:2012 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
سحب م ق أ 1
60811-4-1/2007
208. Safety of laser products - Part 2: Safety of optical هندسة كهربائوة
fibre communication systems (OFCS)
تعديل
EN 60825-2:2004 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
2/2008-60825سحب م ق أ 1
209. تعديل Safety of laser products - Part 4: Laser guards هندسة كهربائوة
EN 60825-4:2006 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
4/2012-60825سحب م ق أ 1
210. Miscellaneous lampholders - Part 1: General هندسة كهربائوة
requirements and tests
تعديل
EN 60838-1:2004 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1/2012-60838سحب م ق أ 1
211. Miscellaneous lampholders - Part 2-2: Particular هندسة كهربائوة
requirements - Connectors for LED modules
تعديل
EN 60838-2-2:2006 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-2-60838سحب م ق أ 1
2/2010
212.
Electrical accessories - Circuit breakers for هندسة كهربائوةovercurrent protection for household and similar installations - Part 1: Circuit-breakers for a.c. operation
تعديل
EN 60898-1:2003 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1/2012-60898سحب م ق أ 1
213. تعديل Circuit-breakers for equipment (CBE) هندسة كهربائوة
EN 60934:2001 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
60934/2010سحب م ق أ 1
214. :Low-voltage switchgear and controlgear - Part 2 هندسة كهربائوة
Circuit-breakers
تعديل
EN 60947-2:2006 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
2/2012-60947سحب م ق أ 1
215. :Low-voltage switchgear and controlgear - Part 3 هندسة كهربائوة
Switches, disconnectors, switch-disconnectors and fuse-combination units
تعديل
EN 60947-3:2009 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
3/2009-60947سحب م ق أ 1
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
م. فاديه عبد الغين ادم دؽرتري الؾجـة الػـقة املسئولة: 24 رقم الؾجـة الػـقة: املعدات واألجفزة الؽفربائقة الؾجـة الػـقة املسئولة:
مالحظات األولوية املدخل تاريخ االنتفاء تاريخ البدء * نوع العؿؾقة املؼرتحاملشروع الؼطاع #
216. -Low-voltage switchgear and controlgear - Part 4 هندسة كهربائوة
1: Contactors and motor-starters - Electromechanical contactors and motor-starters
تعديل
EN 60947-4-1:2010 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-4-60947سحب م ق أ 1
1/2009
217. -Low-voltage switchgear and controlgear - Part 4 هندسة كهربائوة
2: Contactors and motor-starters - AC semiconductor motor controllers and starters
تبني
EN 60947-4-2:2012 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-4-60947سحب م ق أ 1
2/2008
218. -Low-voltage switchgear and controlgear - Part 4 هندسة كهربائوة
3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads
تعديل
EN 60947-4-3:2000 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-4-60947سحب م ق أ 1
3/2008
219. -Low-voltage switchgear and controlgear - Part 5 هندسة كهربائوة
1: Control circuit devices and switching elements - Electromechanical control circuit devices
تعديل
EN 60947-5-1:2004 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-5-60947سحب م ق أ 1
1/2012
220. -Low-voltage switchgear and controlgear - Part 5 هندسة كهربائوة
2: Control circuit devices and switching elements - Proximity switches
تعديل
EN 60947-5-2:2007 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-5-60947م ق أ سحب 1
2/2012
221. -Low-voltage switchgear and controlgear - Part 5 هندسة كهربائوة
5: Control circuit devices and switching elements - Electrical emergency stop device with mechanical latching function
تعديل
EN 60947-5-5:1997 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-5-60947سحب م ق أ 1
5/2012
222. :Low-voltage switchgear and controlgear - Part 8 هندسة كهربائوة
Control units for built-in thermal protection (PTC) for rotating electrical machines
تعديل
EN 60947-5-8:2003
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-5-60947سحب م ق أ 1
8/2009
223. -Low-voltage switchgear and controlgear - Part 7 هندسة كهربائوة
1: Ancillary equipment – Terminal blocks for
copper conductors
تبني
EN 60947-7-1:2009 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-7-60947سحب م ق أ 1
1/2009
224. -Low-voltage switchgear and controlgear - Part 7 هندسة كهربائوة
2: Ancillary equipment – Protective conductor
terminal blocks for copper conductors.
تعديل
EN 60947-7-2:2009 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-7-60947سحب م ق أ 1
2/2009
225. -Low-voltage switchgear and controlgear - Part 7 هندسة كهربائوة
3: Ancillary equipment - Safety requirements for fuse terminal blocks
تعديل
EN 60947-7-3:2009 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-7-60947سحب م ق أ 1
3/2009
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
م. فاديه عبد الغين ادم دؽرتري الؾجـة الػـقة املسئولة: 24 رقم الؾجـة الػـقة: املعدات واألجفزة الؽفربائقة الؾجـة الػـقة املسئولة:
مالحظات األولوية املدخل تاريخ االنتفاء تاريخ البدء * نوع العؿؾقة املؼرتحاملشروع الؼطاع #
226. Information technology equipment - Safety - Part هندسة كهربائوة
1: General requirements
تعديل
EN 60950-1:2006 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1/2010-60950سحب م ق أ 1
227. ;Self-ballasted lamps for general lighting services هندسة كهربائوة
safety requirements
تبني
EN 60968:2013 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
60968/2009سحب م ق أ 1
228. Arc welding equipment - Part 1: Welding power هندسة كهربائوة
sources
تبني
EN 60974-1:2012 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1/2009-60974سحب م ق أ 1
229. Arc welding equipment - Part 2: Liquid cooling هندسة كهربائوة
systems
تبني
EN 60974-2:2013 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
2/2012-60974سحب م ق أ 1
230. Arc welding equipment - Part 6: Limited duty هندسة كهربائوة
equipment
تعديل
EN 60974-6:2011 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
6/2009-60974ق أ سحب م 1
231. تبني Arc welding equipment - Part 7: Torches هندسة كهربائوة
EN 60974-7:2013 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
7/2009-60974سحب م ق أ 1
232. Arc welding equipment - Part 8: Gas consoles for هندسة كهربائوة
welding and plasma cutting systems
تعديل
EN 60974-8:2009 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
8/2009-60974سحب م ق أ 1
233. Arc welding equipment - Part 11: Electrode هندسة كهربائوة
holders
تعديل
EN 60974-11:2010 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-60974سحب م ق أ 1
11/2009
234. Arc welding equipment - Part 12: Coupling هندسة كهربائوة
devices for welding cables
تعديل
EN 60974-12:2011 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-60974سحب م ق أ 1
12/2009
235. تبني Arc welding equipment - Part 13: Welding clamp هندسة كهربائوة
EN 60974-13:2011 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1 -
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
م. فاديه عبد الغين ادم دؽرتري الؾجـة الػـقة املسئولة: 24 رقم الؾجـة الػـقة: املعدات واألجفزة الؽفربائقة الؾجـة الػـقة املسئولة:
مالحظات األولوية املدخل تاريخ االنتفاء تاريخ البدء * نوع العؿؾقة املؼرتحاملشروع الؼطاع #
236. Residual current operated circuit-breakers هندسة كهربائوة
without integral overcurrent protection for household and similar uses (RCCB's) - Part 1: General rules
تعديل
EN 61008-1:2012 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1/2009-61008سحب م ق أ 1
237. Residual current operated circuit-breakers with هندسة كهربائوة
integral overcurrent protection for household and similar uses (RCBO's) - Part 1: General rules
تعديل
EN 61009-1:2012 الشراكة متطلبات اتفاقوة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1/2009-61009سحب م ق أ 1
238. Safety requirements for electrical equipment for هندسة كهربائوة
measurement, control, and laboratory use - Part 1: General requirements
تعديل
EN 61010-1:2010 الشراكة متطلبات اتفاقوة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1/2009-61010سحب م ق أ 1
239. Safety requirements for electrical equipment for هندسة كهربائوة
measurement, control, and laboratory use - Part 2-030: Particular requirements for testing and measuring circuits
تبني
EN 61010-2-
030:2010
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1 -
240.
Safety requirements for electrical equipment for هندسة كهربائوةmeasurement, control, and laboratory use - Part 2-032: Particular requirements for hand-held and hand-manipulated current sensors for electrical test and measurement
تبني
EN 61010-2-
032:2012
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-2-61010سحب م ق أ 1
032/2009
241.
Safety requirements for electrical equipment for هندسة كهربائوةmeasurement, control, and laboratory use - Part 2-033: Particular requirements for hand-held multimeters and other meters, for domestic and professional use, capable of measuring mains voltage
تبني
EN 61010-2-
033:2012
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1 -
242. Safety requirements for electrical equipment for هندسة كهربائوة
measurement, control and laboratory use - Part 2-091: Particular requirements for cabinet X-ray systems
تبني
EN 61010-2-
091:2012
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1 -
243. Safety requirements for electrical equipment for هندسة كهربائوة
measurement, control and laboratory use - Part 2-201: Particular requirements for control equipment
تبني
EN 61010-2-
201:2013
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1 -
244. Safety requirements for electrical equipment for هندسة كهربائوة
measurement, control and laboratory use - Part 031: Safety requirements for hand-held probe assemblies for electrical measurement and test
تعديل
EN 61010-031:2002 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-61010سحب م ق أ 1
031/2009
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
م. فاديه عبد الغين ادم دؽرتري الؾجـة الػـقة املسئولة: 24 رقم الؾجـة الػـقة: املعدات واألجفزة الؽفربائقة الؾجـة الػـقة املسئولة:
مالحظات األولوية املدخل تاريخ االنتفاء تاريخ البدء * نوع العؿؾقة املؼرتحاملشروع الؼطاع #
245. Switches for appliances - Part 2-1: Particular هندسة كهربائوة
requirements for cord switches
تعديل
EN 61058-2-1:2011 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-2-61058سحب م ق أ 1
1/2009
246. Switches for appliances - Part 2-5: Particular هندسة كهربائوة
requirements for change-over selectors
تعديل
EN 61058-2-5:2011 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-2-61058سحب م ق أ 1
1/2009
247. هندسة كهربائوة
Electromechanical contactors for household and
similar purposes
تعديل
EN 61095:2009 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
61095/2009سحب م ق أ 1
248. هندسة كهربائوة
Protection against electric shock - Common aspects for installation and equipment
تعديل
EN 61140:2002 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
61140/2009سحب م ق أ 1
249. هندسة كهربائوة
Bayonet lamp holders
تعديل
EN 61184:2008 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
61184/2009سحب م ق أ 1
250. هندسة كهربائوة
Single-capped fluorescent lamps - Safety specifications
تعديل
EN 61199:2011 اتفاقوة الشراكة متطلبات 31/12/2013 1/1/2013
األوروبوة –األردنوة
61199/2009سحب م ق أ 1
251. هندسة كهربائوة
Low-voltage power supplies, d.c. output - Part 7: Safety requirements
تبني
EN 61204-7:2006 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1 -
252. Connecting devices - Flat quick-connect هندسة كهربائوة
terminations for electrical copper conductors - Safety requirements
تعديل
EN 61210:2010 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
61210/2009سحب م ق أ 1
253. هندسة كهربائوة
Live working - Voltage detectors - Part 3: Two-pole low-voltage type
تعديل
EN 61243-3:2010 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
3/2009-61243سحب م ق أ 1
254. هندسة كهربائوة
Lamp controlgear - Part 1: General and safety requirements
تعديل
EN 61347-1:2008 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1/2012-61347سحب م ق أ 1
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
م. فاديه عبد الغين ادم دؽرتري الؾجـة الػـقة املسئولة: 24 رقم الؾجـة الػـقة: املعدات واألجفزة الؽفربائقة الؾجـة الػـقة املسئولة:
مالحظات األولوية املدخل تاريخ االنتفاء تاريخ البدء * نوع العؿؾقة املؼرتحاملشروع الؼطاع #
255. Lamp controlgear - Part 2-2: Particular هندسة كهربائوة
requirements for d.c. or a.c. supplied electronic step-down convertors for filament lamps
تبني
EN 61347-2-2:2012 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-2-61347سحب م ق أ 1
2/2009
256. Lamp controlgear - Part 2-3: Particular هندسة كهربائوة
requirements for a.c. supplied electronic ballasts for fluorescent lamps
تعديل
EN 61347-2-3:2011 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-2-61347سحب م ق أ 1
3/2009
257. Lamp controlgear - Part 2-7: Particular هندسة كهربائوة
requirements for d.c. supplied electronic ballasts for emergency lighting
تبني
EN 61347-2-7:2012 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-2-61347سحب م ق أ 1
7/2009
258. Lamp controlgear - Part 2-9: Particular هندسة كهربائوة
requirements for ballasts for discharge lamps (excluding fluorescent lamps)
تبني
EN 61347-2-9:2013 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-2-61347سحب م ق أ 1
9/2008
259. Lamp controlgear - Part 2-12: Particular هندسة كهربائوة
requirements for d.c. or a.c. supplied electronic ballasts for discharge lamps (execluding fluorescent lamps)
تعديل
EN 61347-2-
12:2005
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-2-61347سحب م ق أ 1
12/2008
260. هندسة كهربائوة
Conduit systems for cable management - Part 1: General requirements
تعديل
EN 61386-1:2005 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1/2008-61386سحب م ق أ 1
261. هندسة كهربائوة
Conduit systems for cable management - Part 21: Particular requirements - Rigid conduit systems
تعديل
EN 61386-21:2004 الشراكة متطلبات اتفاقوة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-61386سحب م ق أ 1
21/2008
262. هندسة كهربائوة
Conduit systems for cable management - Part 22: Particular requirements - Pliable conduit systems
تعديل
EN 61386-22:2004 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-61386سحب م ق أ 1
22/2008
263. :Conduit systems for cable management - Part 23 هندسة كهربائوة
Particular requirements - Flexible conduit systems
تعديل
EN 61386-23:2004 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-61386سحب م ق أ 1
23/2008
264. :Conduit systems for cable management - Part 24 هندسة كهربائوة
Particular requirements - Conduit systems buried underground
تبني
EN 61386-24:2010 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1 -
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
م. فاديه عبد الغين ادم دؽرتري الؾجـة الػـقة املسئولة: 24 رقم الؾجـة الػـقة: املعدات واألجفزة الؽفربائقة الؾجـة الػـقة املسئولة:
مالحظات األولوية املدخل تاريخ االنتفاء تاريخ البدء * نوع العؿؾقة املؼرتحاملشروع الؼطاع #
265. هندسة كهربائوة
Conduit systems for cable management - Part 25: Particular requirements - Conduit fixing devices
تبني
EN 61386-25:2011 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1 -
266. Low-voltage switchgear and controlgear هندسة كهربائوة
assemblies - Part 1: General rules
تبني
EN 61439-1:2011 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1 -
267. Low-voltage switchgear and controlgear هندسة كهربائوة
assemblies - Part 2: Power switchgear and controlgear assemblies
تبني
EN 61439-2:2011 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1 -
268. Low-voltage switchgear and controlgear هندسة كهربائوة
assemblies - Part 3: Distribution boards intended to be operated by ordinary persons (DBO
تبني
EN 61439-3:2012 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1 -
269. Low-voltage switchgear and controlgear هندسة كهربائوة
assemblies - Part 4: Particular requirements for assemblies for construction sites (ACS)
تبني
EN 61439-3:2012 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1 -
270. Low-voltage switchgear and controlgear هندسة كهربائوة
assemblies - Part 5: Assemblies for power distribution in public networks
تبني
EN 61439-5:2011 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1 -
271. Low-voltage switchgear and controlgear هندسة كهربائوة
assemblies - Part 6: Busbar trunking systems (busways)
تبني
EN 61439-6:2012 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1 -
272. Powertrack systems - Part 1: General هندسة كهربائوة
requirements
تبني
EN 61534-1:2011 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1 -
273. Installation couplers intended for permanent هندسة كهربائوة
connection in fixed installation
تعديل
EN 61535:2009 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
61535/2012سحب م ق أ 1
274. تعديل Miscellaneous lamps هندسة كهربائوة
EN 61549:2003 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
61549/2008سحب م ق أ 1
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
م. فاديه عبد الغين ادم دؽرتري الؾجـة الػـقة املسئولة: 24 رقم الؾجـة الػـقة: املعدات واألجفزة الؽفربائقة الؾجـة الػـقة املسئولة:
مالحظات األولوية املدخل تاريخ االنتفاء تاريخ البدء * نوع العؿؾقة املؼرتحاملشروع الؼطاع #
275.
Electrical safety in low voltage distribution هندسة كهربائوةsystems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 9: Equipment for insulation fault location in IT systems
تعديل
EN 61557-9:2009 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
9/2009-61557سحب م ق أ 1
276.
Electrical safety in low voltage distribution هندسة كهربائوةsystems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 13: Hand-held and hand-manipulated current clamps and sensors for measurement of leakage currents in electrical distribution systems
تبني
EN 61557-13:2011 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1 -
277. هندسة كهربائوة
Safety of power transformers, power supply units and similar - Part 1: General requirements and tests
تعديلEN 61558-1:2005 1/1/2013 31/12/2013 متطلبات اتفاقوة الشراكة
األوروبوة –األردنوة
1/2009-61558سحب م ق أ 1
278. Safety of transformers, reactors, power supply هندسة كهربائوة
units and combinations thereof - Part 2-3: Particular requirements and tests for ignition transformers for gas and oil burners
تعديلEN 61558-2-3:2010 1/1/2013 31/12/2013 متطلبات اتفاقوة الشراكة
األوروبوة –األردنوة
-2-61558سحب م ق أ 1
3/2009
279. Safety of power transformers, power supply units هندسة كهربائوة
and similar - Part 2-4: Particular requirements and tests for isolating transformers and power supply units incorporating isolating transformers
تعديلEN 61558-2-4:2009 1/1/2013 31/12/2013 متطلبات اتفاقوة الشراكة
األوروبوة –األردنوة
-2-61558سحب م ق أ 1
4/2009
280. Safety of transformers, reactors, power supply هندسة كهربائوة
units and combinations thereof - Part 2-5: Particular requirements and tests for transformators for shavers, power supply units for shavers and shaver supply units
تعديلEN 61558-2-5:2010 1/1/2013 31/12/2013 متطلبات اتفاقوة الشراكة
األوروبوة –األردنوة
-2-61558سحب م ق أ 1
5/2009
281. Safety of power transformers, power supply units هندسة كهربائوة
and similar - Part 2-6: Particular requirements and tests for isolating transformers and power supply units incorporating safety isolating transformers
تعديلEN 61558-2-6:2009 1/1/2013 31/12/2013 متطلبات اتفاقوة الشراكة
األوروبوة –األردنوة
-2-61558سحب م ق أ 1
6/2009
282. Safety of transformers, reactors, power supply هندسة كهربائوة
units and combinations thereof - Part 2-9: Particular requirements and tests for transformers and power supply units for class III handlamps for tungsten filament lamps
تعديلEN 61558-2-9:2011 1/1/2013 31/12/2013 متطلبات اتفاقوة الشراكة
األوروبوة –األردنوة
-2-61558سحب م ق أ 1
9/2009
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
م. فاديه عبد الغين ادم دؽرتري الؾجـة الػـقة املسئولة: 24 رقم الؾجـة الػـقة: املعدات واألجفزة الؽفربائقة الؾجـة الػـقة املسئولة:
مالحظات األولوية املدخل تاريخ االنتفاء تاريخ البدء * نوع العؿؾقة املؼرتحاملشروع الؼطاع #
283.
Safety of transformers, reactors, power supply هندسة كهربائوةunits and combinations therof - Part 2-12: Particular requirements and tests for constant voltage transformers and power supply units for constant voltage
تعديلEN 61558-2-
12:2011
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-2-61558سحب م ق أ 1
12/2009
284. Safety of power transformers, power supply units كهربائوةهندسة
and similar - Part 2-13: Particular requirements and tests for auto transformers and power supply units incorporating auto transformers
تبنيEN 61558-2-
13:2013
الشراكة متطلبات اتفاقوة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-2-61558سحب م ق أ 1
13/2009
285.
Safety of transformers, reactors, power supply هندسة كهربائوةunits and combination thereof - Part 2-14: Particular requirements and tests for variable transformers and power supply units incorporating variable transformers
تبنيEN 61558-2-
14:2013
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1 -
286. Safety of power transformers, power supply units هندسة كهربائوة
and similar - Part 2-15: Particular requirements for isolating transformers for the supply of medical locations
تبنيEN 61558-2-
15:2012
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-2-61558سحب م ق أ 1
15/2012
287.
Safety of transformers, reactors, power supply هندسة كهربائوةunits and similar products for voltages up to 1100 V - Part 2-16: Particular requirements and tests for switch mode power supply units and transformers for switch mode power supply units
تبنيEN 61558-2-
16:2009
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1 -
288. Safety of transformers, reactors, power supply هندسة كهربائوة
units and combinations thereof - Part 2-20: Particular requirements and tests for small reactors
تبنيEN 61558-2-
20:2011
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-2-61558سحب م ق أ 1
20/2009
289.
Safety of transformers, reactors, power supply هندسة كهربائوةunits and combinations thereof - Part 2-23: Particular requirements and tests for transformers and power supply units for construction sites
تبنيEN 61558-2-
23:2010
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
-2-61558سحب م ق أ 1
23/2009
290. :Low-voltage surge protective devices - Part 11 هندسة كهربائوة
Surge protective devices connected to low-voltage power systems; Requirements and tests
تبنيEN 61643-11:2012 1/1/2013 31/12/2013 متطلبات اتفاقوة الشراكة
األوروبوة –األردنوة
-61643سحب م ق أ 1
11/2012
291. :Low voltage surge protective devices - Part 21 هندسة كهربائوة
Surge protective devices connected to telecommunications and signalling networks - Performance requirements and testing methods
تعديلEN 61643-21:2001 1/1/2013 31/12/2013 متطلبات اتفاقوة الشراكة
األوروبوة –األردنوة
-61643سحب م ق أ 1
21/2012
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
م. فاديه عبد الغين ادم دؽرتري الؾجـة الػـقة املسئولة: 24 رقم الؾجـة الػـقة: املعدات واألجفزة الؽفربائقة الؾجـة الػـقة املسئولة:
مالحظات األولوية املدخل تاريخ االنتفاء تاريخ البدء * نوع العؿؾقة املؼرتحاملشروع الؼطاع #
292. هندسة كهربائوة
Photovoltaic (PV) module safety qualification - Part 1: Requirements for construction
تعديلEN 61730-1:2007 1/1/2013 31/12/2013 متطلبات اتفاقوة الشراكة
األوروبوة –األردنوة
1/2012-61730سحب م ق أ 1
293. هندسة كهربائوة
Photovoltaic (PV) module safety qualification - Part 2: Requirements for testing
تعديلEN 61730-2:2007 1/1/2013 31/12/2013 متطلبات اتفاقوة الشراكة
األوروبوة –األردنوة
2/2012-61730سحب م ق أ 1
294. Electric appliances connected to the water mains هندسة كهربائوة
— Avoidance of backsiphonage and failure of
hose-sets
تبني
EN 61770:2009 اتفاقوة الشراكة متطلبات 31/12/2013 1/1/2013
األوروبوة –األردنوة
1 -
295. هندسة كهربائوة
Specified time relays for industrial use - Part 1:
Requirements and tests
تعديل
EN 61812-1:2011 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1/2012-61812سحب م ق أ 1
296. كهربائوةهندسة
Instrument transformers - Part 1: General
requirements
تبنيEN 61869-1:2009
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1 -
297. هندسة كهربائوة
Instrument transformers - Part 2: Additional
requirements for current transformers
تبنيEN 61869-2:2012
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1 -
298. هندسة كهربائوة
Instrument transformers - Part 3: Additional requirements for inductive voltage transformers
تبني
EN 61869-3:2011 الشراكة متطلبات اتفاقوة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1 -
299. هندسة كهربائوة
Instrument transformers - Part 5: Additional
requirements for capacitor voltage transformers
تبني
EN 61869-5:2011 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1 -
300. هندسة كهربائوة
Cable cleats for electrical installation
تبني
EN 61914:2009 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1 -
301. - Low-voltage switchgear and controlgear هندسة كهربائوة
Controller-device interfaces (CDIs) - Part 2:
Actuator sensor interface (AS-i)
تبني
EN 62026-2:2013 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1 -
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
م. فاديه عبد الغين ادم دؽرتري الؾجـة الػـقة املسئولة: 24 رقم الؾجـة الػـقة: املعدات واألجفزة الؽفربائقة الؾجـة الػـقة املسئولة:
مالحظات األولوية املدخل تاريخ االنتفاء تاريخ البدء * نوع العؿؾقة املؼرتحاملشروع الؼطاع #
302.
هندسة كهربائوةLow-voltage switchgear and controlgear -
Controller-device interfaces (CDIs) - Part 7:
CompoNet
تبني
EN 62026-7:2013 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1 -
303. هندسة كهربائوة
LED modules for general lighting - Safety specifications
تعديلEN 62031:2008 1/1/2013 31/12/2013 متطلبات اتفاقوة الشراكة
األوروبوة –األردنوة
62031/2012سحب م ق أ 1
304. هندسة كهربائوة
Discharge lamps (excluding fluorescent lamps) - Safety specifications
تعديلEN 62035:2000 1/1/2013 31/12/2013 متطلبات اتفاقوة الشراكة
األوروبوة –األردنوة
62035/2012م ق أ سحب 1
305.
هندسة كهربائوة
Uninterruptible power systems (UPS) — Part 1:
General and safety requirements for UPS
تعديل
EN 62040-1:2008 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
سحب: 1
1/2009-1-62040م ق أ
2/2009-1-62040م ق أ
306. هندسة كهربائوة
Sound signalling devices for household and
similar purposes
تبني
EN 62080:2009 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1 -
307. Safety of power converters for use in هندسة كهربائوة
photovoltaic power systems - Part 1: General requirements
تبني
EN 62109-1:2010 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1 -
308. Safety of power converters for use in هندسة كهربائوة
photovoltaic power systems - Part 2: Particular requirements for inverters
تبني
EN 62109-2:2011 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1 -
309. Resistance welding equipment — Part 1: Safety هندسة كهربائوة
requirements for design, manufacture and
installation
تبني
EN 62135-1:2008 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
50063/2009سحب م ق أ 1
310. Plugs, socket-outlets, vehicle couplers and vehicle هندسة كهربائوة
inlets — Conductive charging of electric vehicles
— Part 1: Charging of electric vehicles up to 250
A a.c. and 400 A d.c.
تبني
EN 62196-1:2012 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1 -
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
م. فاديه عبد الغين ادم دؽرتري الؾجـة الػـقة املسئولة: 24 رقم الؾجـة الػـقة: املعدات واألجفزة الؽفربائقة الؾجـة الػـقة املسئولة:
مالحظات األولوية املدخل تاريخ االنتفاء تاريخ البدء * نوع العؿؾقة املؼرتحاملشروع الؼطاع #
311.
Plugs, socket-outlets, vehicle connectors and هندسة كهربائوة
vehicle inlets - Conductive charging of electric
vehicles - Part 2: Dimensional compatibility and
interchangeability requirements for a.c. pin and
contact-tube accessories
تبني
EN 62196-2:2012 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1 -
312. هندسة كهربائوة
Empty enclosures for low-voltage switchgear and controlgear assemblies - General requirements
تعديل
EN 62208:2011 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
62208/2009ق أ سحب م 1
313. Measurement methods for electromagnetic fields هندسة كهربائوة
of household appliances with regard to human
exposure
تبني
EN 62233:2008 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1 -
314. هندسة كهربائوة
Photovoltaic pumping systems - Design qualification and performance measurements
تبني
EN 62253:2011 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1 -
315. هندسة كهربائوة
Cable management systems – Cable ties for
electrical installations
تبني
EN 62275:2009 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1 -
316. هندسة كهربائوة
Fuel cell technologies - Part 3-100: Stationary
fuel cell power systems - Safety
تبني
EN 62282-3-
100:2012
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1 -
317. هندسة كهربائوة
Fuel cell technologies - Part 3-300: Stationary
fuel cell power systems - Installation
تبني
EN 62282-3-
300:2012
متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1 -
318. هندسة كهربائوة
Fuel cell technologies - Part 5-1: Portable fuel cell
power systems - Safety
تبني
EN 62282-5-1:2012 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1 -
319. هندسة كهربائوة
Static transfer systems (STS) — Part 1: General
and safety requirements
تبني
EN 62310-1:2005 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1 -
320. Assessment of electronic and electrical equipment هندسة كهربائوة
related to human exposure restrictions for
electromagnetic fields (0 Hz-300 GHz)
تبني
EN 62311:2008 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1 -
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
م. فاديه عبد الغين ادم دؽرتري الؾجـة الػـقة املسئولة: 24 رقم الؾجـة الػـقة: املعدات واألجفزة الؽفربائقة الؾجـة الػـقة املسئولة:
مالحظات األولوية املدخل تاريخ االنتفاء تاريخ البدء * نوع العؿؾقة املؼرتحاملشروع الؼطاع #
321. Electrical resistance trace heating systems for هندسة كهربائوة
industrial and commercial applications — Part 1: General and testing requirements
تبنيEN 62395-1:2006 1/1/2013 31/12/2013 الشراكة متطلبات اتفاقوة
األوروبوة –األردنوة
1 -
322. Type B residual current operated circuit-breakers هندسة كهربائوة
with and without integral overcurrent protection for household and similar uses (Type B RCCBs and Type B RCBOs)
تبنيEN 62423:2012 1/1/2013 31/12/2013 متطلبات اتفاقوة الشراكة
األوروبوة –األردنوة
1 -
323. هندسة كهربائوة
Photobiological safety of lamps and lamp systems
تبنيEN 62471-:2008 1/1/2013 31/12/2013 متطلبات اتفاقوة الشراكة
األوروبوة –األردنوة
1 -
324. Assessment of the compliance of low power هندسة كهربائوة
electronic and electrical apparatus with the basic restrictions related to human exposure to electromagnetic fields (10 MHz to 300 GHz)
تبنيEN 62479-:2010 1/1/2013 31/12/2013 متطلبات اتفاقوة الشراكة
األوروبوة –األردنوة
1 -
325. هندسة كهربائوة
Assessment of lighting equipment related to human exposure to electromagnetic fields
تبنيEN 62493-:2010 1/1/2013 31/12/2013 متطلبات اتفاقوة الشراكة
األوروبوة –األردنوة
1 -
326. هندسة كهربائوة
Fluorescent induction lamps - Safety specifications
تبنيEN 62532-:2011 1/1/2013 31/12/2013 متطلبات اتفاقوة الشراكة
األوروبوة –األردنوة
1 -
327. هندسة كهربائوة
Articulated systems and flexible systems for cable guiding
تبنيEN 62549-:2011 1/1/2013 31/12/2013 متطلبات اتفاقوة الشراكة
األوروبوة –األردنوة
1 -
328. كهربائوة هندسة
Self-ballasted LED-lamps for general lighting services by voltage > 50 V - Safety specifications
تبنيEN 62560-:2012 1/1/2013 31/12/2013 متطلبات اتفاقوة الشراكة
األوروبوة –األردنوة
1 -
329. Polyvinyl chloride insulated cables of rated هندسة كهربائوة
voltages up to and including 450/750 V — Part 4: Sheathed cables for fixed wiring
تبنيHD 21.4 S2:1990 1/1/2013 31/12/2013 متطلبات اتفاقوة الشراكة
األوروبوة –األردنوة
1 -
330. Polyvinyl chloride insulated cables of rated هندسة كهربائوة
voltages up to and including 450/750 V — Part 8: Single core non-sheathed cables for decorative chains
تبنيHD 21.8 S2:1999 1/1/2013 31/12/2013 متطلبات اتفاقوة الشراكة
األوروبوة –األردنوة
1 -
331. Polyvinyl chloride insulated cables of rated هندسة كهربائوة
voltages up to and including 450/750 V — Part 9:
Single core non-sheathed cable for installation at
low temperatures
تبني
HD 21.9 S2:1995 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1 -
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
م. فاديه عبد الغين ادم دؽرتري الؾجـة الػـقة املسئولة: 24 رقم الؾجـة الػـقة: املعدات واألجفزة الؽفربائقة الؾجـة الػـقة املسئولة:
مالحظات األولوية املدخل تاريخ االنتفاء تاريخ البدء * نوع العؿؾقة املؼرتحاملشروع الؼطاع #
332. هندسة كهربائوة
Identification of cores in cables and flexible cords
تبني
HD 308 S2:2001 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1 -
333. هندسة كهربائوة
System for cable designation
تبني
HD 361 S3:1999 اتفاقوة الشراكة متطلبات 31/12/2013 1/1/2013
األوروبوة –األردنوة
1 -
334. هندسة كهربائوة
Direct acting recording electrical measuring
instruments and their accessories
تبني
HD 368 S1:1978 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1 -
335. هندسة كهربائوة
Guide to use of low voltage harmonized cables
تبني
HD 516 S2:1997 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1 -
336. هندسة كهربائوة
Conference systems — Electrical and audio
requirements
تبني
HD 549 S1:1989 الشراكة متطلبات اتفاقوة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1 -
337. هندسة كهربائوة
Distribution cables of rated voltage 0,6/1 kV
تبني
HD 603 S1:1994 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1 -
338. هندسة كهربائوة
0,6/1 kV and 1,9/3,3 kV power cables with
special fire performance for use in power stations
تبني
HD 604 S1:1994 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1 -
339. هندسة كهربائوة
Electric cables — Additional test methods
تبني
HD 605 S2:2008 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1 -
340. هندسة كهربائوة
Overhead distribution cables of rated voltage
Uo/Um (Um): 0,6/1 (1,2) kV
تبني
HD 626 S1:1996 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1 -
341. هندسة كهربائوة
Multicore and multipair cables for installation
above and below ground
تبني
HD 627 S1:1996 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1 -
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
م. فاديه عبد الغين ادم دؽرتري الؾجـة الػـقة املسئولة: 24 رقم الؾجـة الػـقة: املعدات واألجفزة الؽفربائقة الؾجـة الػـقة املسئولة:
مالحظات األولوية املدخل تاريخ االنتفاء تاريخ البدء * نوع العؿؾقة املؼرتحاملشروع الؼطاع #
342. هندسة كهربائوة
Electrical accessories — Portable residual current
devices without integral overcurrent protection for
household and similar use (PRCDs)
تبني
HD 639 S1:2002 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1 -
343.
Low-voltage fuses — Part 2: Supplementary هندسة كهربائوة
requirements for fuses for use by authorized
persons (fuses mainly for industrial application)
— Examples of standardized systems of fuses A
to I
تبني
HD 60269-2:2010 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1 -
344.
Low-voltage fuses — Part 3: Supplementary هندسة كهربائوة
requirements for fuses for use by unskilled
persons (fuses mainly for household or similar
applications) — Examples of standardized
systems of fuses A to F
تبني
HD 60269-3:2007 متطلبات اتفاقوة الشراكة 31/12/2013 1/1/2013
األوروبوة –األردنوة
1 -
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
م. فاديه عبد الغين ادم دؽرتري الؾجـة الػـقة املسئولة: 24 رقم الؾجـة الػـقة: االلؽرتونقات واالتصاالت الؾجـة الػـقة املسئولة:
مالحظات األولوية املدخل تاريخ االنتفاء تاريخ البدء * نوع العؿؾقة املشروع املؼرتح الؼطاع #
1. Electromagnetic compatibility - Requirements for هندسة اتصاالت
household appliances, electric tools and similar
apparatus - Part 2: Immunity product family
standard
تبين
EN 55014-2:1997 متطلبات اتفاقوة الشراكة 31/12/2014 1/1/2014
األوروبوة –األردنوة
ع د 1
2. Limits and methods of measurement of radio اتصاالتهندسة
disturbance characteristics of electrical ligthing
and similar equipment
تبين
EN 55015:2006 متطلبات اتفاقوة الشراكة 31/12/2014 1/1/2014
األوروبوة –األردنوة
ع د 1
3. Sound and television broadcast receivers and هندسة اتصاالت
associated equipment - Immunity characteristics -
Limits and methods of measurement
تبين
EN 55020:2007 متطلبات اتفاقوة الشراكة 31/12/2014 1/1/2014
األوروبوة –األردنوة
ع د 1
4. Information technology equipment - Radio هندسة اتصاالت
disturbance characteristics - Limits and methods
of measurement
تبين
EN 55022:2010 متطلبات اتفاقوة الشراكة 31/12/2014 1/1/2014
األوروبوة –األردنوة
ع د 1
5. Information technology equipment - Immunity هندسة اتصاالت
characteristics - Limits and methods of
measurement
تبين
EN 55024:2010 متطلبات اتفاقوة الشراكة 31/12/2014 1/1/2014
األوروبوة –األردنوة
ع د 1
6. Electromagnetic compatibility - Product family هندسة اتصاالت
standard for audio, video, audio-visual and
entertainment lighting control apparatus for
professional use - Part 1: Emissions
تبين
EN 55103-1:2009 متطلبات اتفاقوة الشراكة 31/12/2014 1/1/2014
األوروبوة –األردنوة
ع د 1
7. Electromagnetic compatibility - Product family هندسة اتصاالت
standard for audio, video, audio-visual and
entertainment lighting control apparatus for
professional use - Part 2: Immunity
تبين
EN 55103-2:2009 متطلبات اتفاقوة الشراكة 31/12/2014 1/1/2014
األوروبوة –األردنوة
ع د 1
8. Safety of machinery - Electrical equipment of هندسة اتصاالت
machines - Part 31: Particular safety and EMC
requirements for sewing machines, units and
systems
تبين
EN 60204-31:1998 متطلبات اتفاقوة الشراكة 31/12/2014 1/1/2014
األوروبوة –األردنوة
ع د 1
9. :Telecontrol equipment and systems - Part 2 هندسة اتصاالت
Operating conditions - Section 1: Power supply
and electromagnetic compatibility
تبين
EN 60870-2-1:1996 متطلبات اتفاقوة الشراكة 31/12/2014 1/1/2014
األوروبوة –األردنوة
ع د 1
10. Maritime navigation and radiocommunication هندسة اتصاالت
equipment and systems - General requirements -
Methods of testing and required test results
تبين
EN 60945:2002 متطلبات اتفاقوة الشراكة 31/12/2014 1/1/2014
األوروبوة –األردنوة
ع د 1
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
م. فاديه عبد الغين ادم دؽرتري الؾجـة الػـقة املسئولة: 24 رقم الؾجـة الػـقة: االلؽرتونقات واالتصاالت الؾجـة الػـقة املسئولة:
مالحظات األولوية املدخل تاريخ االنتفاء تاريخ البدء * نوع العؿؾقة املشروع املؼرتح الؼطاع #
11.
-Low-voltage switchgear and controlgear - Part 5 هندسة اتصاالت
6: Control circuit devices and switching elements
- DC interface for proximity sensors and
switching amplifiers
تبين
EN 60947-5-6:2000 متطلبات اتفاقوة الشراكة 31/12/2014 1/1/2014
األوروبوة –األردنوة
ع د 1
12. :Arc welding equipment - Part 10 هندسة اتصاالت
Electromagnetic compatibility (EMC)
requirements
تبين
EN 60974-10:2007 متطلبات اتفاقوة الشراكة 31/12/2014 1/1/2014
األوروبوة –األردنوة
ع د 1
13. :Electromagnetic compatibility (EMC) - Part 3-2 هندسة اتصاالت
Limits - Limits for harmonic current emissions
(equipment input current <kleiner => 16 A per
phase)
تبين
EN 61000-3-2:2006 متطلبات اتفاقوة الشراكة 31/12/2014 1/1/2014
األوروبوة –األردنوة
ع د 1
14.
:Electromagnetic compatibility (EMC) - Part 3-3 هندسة اتصاالت
Limits - Limitation of voltage changes, voltage
fluctuations and flicker in public low-voltage
supply systems, for equipment with rated current
<kleiner => 16 A per phase and not subject to
conditional connection
تبين
EN 61000-3-3:2008 متطلبات اتفاقوة الشراكة 31/12/2014 1/1/2014
األوروبوة –ة األردنو
ع د 1
15.
:Electromagnetic compatibility (EMC) - Part 3-11 هندسة اتصاالت
Limits; Limitation of voltage changes, voltage
fluctuations and flicker in public low-voltage
supply systems; Equipment with rated current
<kleiner => 75 A and subject to conditional
connection
تبين
EN 61000-3-
11:2000
متطلبات اتفاقوة الشراكة 31/12/2014 1/1/2014
األوروبوة –األردنوة
ع د 1
16.
:Electromagnetic compatibility (EMC) - Part 3-12 هندسة اتصاالت
Limits - Limits for harmonic currents produced
by equipment connected to public low- voltage
systems with input current > 16 A and < = 75 A
per phase
تبين
EN 61000-3-
12:2011
متطلبات اتفاقوة الشراكة 31/12/2014 1/1/2014
األوروبوة –األردنوة
ع د 1
17. :Electromagnetic compatibility (EMC) - Part 6-1 هندسة اتصاالت
Generic standards; Immunity for residential,
commercial and light-industrial environments
تبين
EN 61000-6-1:2007 متطلبات اتفاقوة الشراكة 31/12/2014 1/1/2014
األوروبوة –األردنوة
ع د 1
18. :Electromagnetic compatibility (EMC) - Part 6-2 هندسة اتصاالت
Generic standards - Immunity for industrial
environments
تبين
EN 61000-6-2:2005 متطلبات اتفاقوة الشراكة 31/12/2014 1/1/2014
األوروبوة –األردنوة
ع د 1
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
م. فاديه عبد الغين ادم دؽرتري الؾجـة الػـقة املسئولة: 24 رقم الؾجـة الػـقة: االلؽرتونقات واالتصاالت الؾجـة الػـقة املسئولة:
مالحظات األولوية املدخل تاريخ االنتفاء تاريخ البدء * نوع العؿؾقة املشروع املؼرتح الؼطاع #
19.
هندسة اتصاالتElectromagnetic compatibility (EMC) - Part 6-3:
Generic standards; Emission standard for
residential, commercial and light-industrial
environments
تبين
EN 61000-6-3:2007 متطلبات اتفاقوة الشراكة 31/12/2014 1/1/2014
األوروبوة –األردنوة
ع د 1
20. :Electromagnetic compatibility (EMC) - Part 6-4 هندسة اتصاالت
Generic standards; Emission standard for
industrial environments
تبين
EN 61000-6-4:2007 متطلبات اتفاقوة الشراكة 31/12/2014 1/1/2014
األوروبوة –األردنوة
ع د 1
21. هندسة اتصاالت
Low-voltage power supplies, d.c. output - Part 3:
Electromagnetic compatibility (EMC)
تبين
EN 61204-3:2000
متطلبات اتفاقوة الشراكة 31/12/2014 1/1/2014
األوروبوة –األردنوة
ع د 1
22. Electrical equipment for measurement, control هندسة اتصاالت
and laboratory use - EMC requirements - Part 1:
General requirements
تبين
EN 61326-1:2006 الشراكة متطلبات اتفاقوة 31/12/2014 1/1/2014
األوروبوة –األردنوة
ع د 1
23.
Electrical equipment for measurement, control هندسة اتصاالت
and laboratory use - EMC requirements - Part 2-1:
Particular requirements - Test configurations,
operational conditions and performance criteria
for sensitive test and measurement equipment for
EMC unprotected applications
تبين
EN 61326-2-1:2006 متطلبات اتفاقوة الشراكة 31/12/2014 1/1/2014
األوروبوة –األردنوة
ع د 1
24.
Electrical equipment for measurement, control هندسة اتصاالت
and laboratory use - EMC requirements - Part 2-2:
Particular requirements - Test configurations,
operational conditions and performance criteria
for portable test, measuring and monitoring
equipment used in low-voltage distribution
systems
تبين
EN 61326-2-2:2006 متطلبات اتفاقوة الشراكة 31/12/2014 1/1/2014
األوروبوة –األردنوة
ع د 1
25.
Electrical equipment for measurement, control هندسة اتصاالت
and laboratory use - EMC requirements - Part 2-3:
Particular requirements - Test configuration,
operational conditions and performance criteria
for transducers with integrated or remote signal
conditioning
تبين
EN 61326-2-3:2006 متطلبات اتفاقوة الشراكة 31/12/2014 1/1/2014
األوروبوة –األردنوة
ع د 1
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
م. فاديه عبد الغين ادم دؽرتري الؾجـة الػـقة املسئولة: 24 رقم الؾجـة الػـقة: االلؽرتونقات واالتصاالت الؾجـة الػـقة املسئولة:
مالحظات األولوية املدخل تاريخ االنتفاء تاريخ البدء * نوع العؿؾقة املشروع املؼرتح الؼطاع #
26.
Electrical equipment for measurement, control هندسة اتصاالت
and laboratory use - EMC requirements - Part 2-4:
Particular requirements - Test configurations,
operational conditions and performance criteria
for insulation monitoring devices according to
IEC 61557-8 and for equipment for insulation
fault location according to IEC 61557-9
تبين
EN 61326-2-4:2006 متطلبات اتفاقوة الشراكة 31/12/2014 1/1/2014
األوروبوة –األردنوة
ع د 1
27.
Electrical equipment for measurement, control هندسة اتصاالت
and laboratory use - EMC requirements - Part 2-5:
Particular requirements - Test configurations,
operational conditions and performance criteria
for field devices with interfaces according to IEC
61784-1, CP 3/2
تبين
EN 61326-2-5:2006 متطلبات اتفاقوة الشراكة 31/12/2014 1/1/2014
األوروبوة –األردنوة
ع د 1
28. Residual current-operated protective devices هندسة اتصاالت
(RCDs) for household and similar use -
Electromagnetic compatibility
تبين
EN 61543:1995 متطلبات اتفاقوة الشراكة 31/12/2014 1/1/2014
األوروبوة –األردنوة
ع د 1
29. هندسة اتصاالت
Equipment for general lighting purposes - EMC
immunity requirements
تبين
EN 61547:2009 متطلبات اتفاقوة الشراكة 31/12/2014 1/1/2014
األوروبوة –األردنوة
ع د 1
30. - Adjustable speed electrical power drive systems هندسة اتصاالت
Part 3: EMC requirements and specific test
methods
تبين
EN 61800-3:2004 متطلبات اتفاقوة الشراكة 31/12/2014 1/1/2014
األوروبوة –األردنوة
ع د 1
31. :Uninterruptible power systems (UPS) - Part 2 هندسة اتصاالت
Electromagnetic compatibility (EMC)
requirements
تبين
EN 62040-2:2006 متطلبات اتفاقوة الشراكة 31/12/2014 1/1/2014
األوروبوة –األردنوة
ع د 1
32. Electricity metering equipment (AC) - General هندسة اتصاالت
requirements, tests and test conditions - Part 11:
Metering equipment
تبين
EN 62052-11:2003 متطلبات اتفاقوة الشراكة 31/12/2014 1/1/2014
األوروبوة –األردنوة
ع د 1
33. Electricity metering equipment (a.c.) - General اتصاالتهندسة
requirements, tests and test conditions - Part 21:
Tariff and load control equipment
تبين
EN 62052-21:2004 متطلبات اتفاقوة الشراكة 31/12/2014 1/1/2014
األوروبوة –األردنوة
ع د 1
34. Electricity metering equipment (a.c.) - Particular هندسة اتصاالت
requirements - Part 11: Electromechanical meters
for active energy (classes 0,5, 1 and 2)
تبني
EN 62053-11:2003 متطلبات اتفاقوة الشراكة 31/12/2014 1/1/2014
األوروبوة –األردنوة
ع د 1
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
م. فاديه عبد الغين ادم دؽرتري الؾجـة الػـقة املسئولة: 24 رقم الؾجـة الػـقة: االلؽرتونقات واالتصاالت الؾجـة الػـقة املسئولة:
مالحظات األولوية املدخل تاريخ االنتفاء تاريخ البدء * نوع العؿؾقة املشروع املؼرتح الؼطاع #
35. Electricity metering equipment (a.c.) - Particular هندسة اتصاالت
requirements - Part 21: Static meters for active
energy (classes 1 and 2)
تبني
EN 62053-21:2003 متطلبات اتفاقوة الشراكة 31/12/2014 1/1/2014
األوروبوة –األردنوة
ع د 1
36. Electricity metering equipment (a.c.) - Particular هندسة اتصاالت
requirements - Part 22: Static meters for active
energy (classes 0,2 S and 0,5 S)
تبني
EN 62053-22:2003 متطلبات اتفاقوة الشراكة 31/12/2014 1/1/2014
األوروبوة –األردنوة
ع د 1
37. Electricity metering equipment (a.c.) - Particular هندسة اتصاالت
requirements - Part 23: Static meters for reactive
energy (classes 2 and 3)
تبني
EN 62053-23:2003 متطلبات اتفاقوة الشراكة 31/12/2014 1/1/2014
األوروبوة –األردنوة
ع د 1
38. Electricity metering (a.c.) - Tariff and load control هندسة اتصاالت
- Part 11: Particular requirements for electronic
ripple control receivers
تبني
EN 62054-11:2004 متطلبات اتفاقوة الشراكة 31/12/2014 1/1/2014
األوروبوة –األردنوة
ع د 1
39. Electricity metering (a.c.) - Tariff and load control هندسة اتصاالت
- Part 21: Particular requirements for time
switches
تبني
EN 62054-21:2004 متطلبات اتفاقوة الشراكة 31/12/2014 1/1/2014
األوروبوة –األردنوة
ع د 1
40. :Resistance welding equipment - Part 2 هندسة اتصاالت
Electromagnetic compatibility (EMC)
requirements
تبني
EN 62135-2:2008
متطلبات اتفاقوة الشراكة 31/12/2014 1/1/2014
األوروبوة –األردنوة
ع د 1
41. :Static transfer systems (STS) - Part 2 هندسة اتصاالت
Electromagnetic compatibility (EMC)
requirements
تبني
EN 62310-2:2007 متطلبات اتفاقوة الشراكة 31/12/2014 1/1/2014
األوروبوة –األردنوة
ع د 1
42. Type B residual current operated circuit-breakers هندسة اتصاالت
with and without integral overcurrent protection
for household and similar uses (Type B RCCBs
and Type B RCBOs)
تبني
EN 62423:2009
اتفاقوة الشراكة متطلبات 31/12/2014 1/1/2014
األوروبوة –األردنوة
ع د 1
43. Electromagnetic compatibility and Radio هندسة اتصاالت
spectrum Matters (ERM) - Telecommunication
network equipment - ElectroMagnetic
Compatibility (EMC) requirements
تبني
ETSI 300 386
V1.6.1:2010
متطلبات اتفاقوة الشراكة 31/12/2014 1/1/2014
األوروبوة –األردنوة
ع د 1
44.
Electromagnetic compatibility and Radio هندسة اتصاالت
spectrum Matters (ERM) - ElectroMagnetic
Compatibility (EMC) standard for radio
equipment and services - Part 1: Common
technical requirements
تبني
ETSI 300 389-1
V1.9.2
متطلبات اتفاقوة الشراكة 31/12/2014 1/1/2014
األوروبوة –األردنوة
ع د 1
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
م. فاديه عبد الغين ادم دؽرتري الؾجـة الػـقة املسئولة: 24 رقم الؾجـة الػـقة: االلؽرتونقات واالتصاالت الؾجـة الػـقة املسئولة:
مالحظات األولوية املدخل تاريخ االنتفاء تاريخ البدء * نوع العؿؾقة املشروع املؼرتح الؼطاع #
45. -Insulation coordination for equipment within low هندسة اتصاالت
voltage systems - Part 5: Comprehensive method
for determining clearances and creepage distances
equal to or less than 2 mm
تبني
ETSI 301489-34 V
1.3.1:2010
متطلبات اتفاقوة الشراكة 31/12/2014 1/1/2014
األوروبوة –األردنوة
ع د 1
46. Cable networks for television signals, sound هندسة اتصاالت
signals and interactive services - Part 2: Electromagnetic compatibility for equipment
تبني
EN 50083-2:2012 متطلبات اتفاقوة الشراكة 31/12/2014 1/1/2014
األوروبوة –األردنوة
-50083سحب م ق أ 1
2/2012
47. هندسة اتصاالت
Power frequency overvoltage protective device for household and similar applications (POP)
تعديل
EN 50550:2011 متطلبات اتفاقوة الشراكة 31/12/2014 1/1/2014
األوروبوة –األردنوة
50550/2012سحب م ق أ 1
48. هندسة اتصاالت
Automatic electrical controls for household and similar use - Part 1: General requirements
تبني
EN 60730-1:2011 متطلبات اتفاقوة الشراكة 31/12/2014 1/1/2014
األوروبوة –األردنوة
-60730سحب م ق أ 1
1/2009
49. :Low-voltage switchgear and controlgear - Part 3 هندسة اتصاالت
Switches, disconnectors, switch-disconnectors and fuse-combination units
تعديل
EN 60947-3:2009 متطلبات اتفاقوة الشراكة 31/12/2014 1/1/2014
األوروبوة –األردنوة
-60947سحب م ق أ 1
3/2009
50. Low-voltage switchgear and controlgear هندسة اتصاالت
assemblies - Part 3: Distribution boards intended to be operated by ordinary persons (DBO)
تبني
EN 61439-3:20012 متطلبات اتفاقوة الشراكة 31/12/2014 1/1/2014
األوروبوة –األردنوة
1 -
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Eng. Saherah Arabiat Secretary of Technical
Committee 26
No. of Technical
Committee
Fats and oils and their
products
Technical
Committee
(TC)
Notes (references) Priority Input Date of finish Date of start Process Proposal Sector #
IOOC STAND for olive oil 1 Request from
agriculture
municipality
30/5/2014 15/2/2014 Amendment
3/2012
Fats and oils ـــ Olive oil and
olive pomace oil Food
industry 1
ISO 6884/1985 1 Periodic
review 15/4/2014 15/32014
Adoption
(reprint)
725/2000
Fats and oils ـــ Determination
of ash Food
industry 2
ISO 3596-1/1988 1 Periodic
review 15/5/2015 15/4/2014
Adoption
(reprint)
738/2000
Fats and oils ـــ determination
of unsaponifiable matter –
method using diethyl ether
extraction
Food
industry 3
Codex guideline 36
Re.1/1991 1
Periodic
review 1/7/2014 1/6/2014
Adoption
(reprint)
1400/2004
Fats and oils – storage and
transport of the edible oils and
fats in bulk
Food
industry 4
IOOC STAND for olive oil 1 Periodic
review 1/8/2014 1/7/2014
Adoption
(reprint)
1508/2002
Fats and oils – Organoleptic
assessment of virgin olive oil Food
industry 5
ISO 935/1988 1 Periodic
review 1/9/2014 1/8/2014
Adoption
(reprint)
718/2000
Fats and oils – Determination
of titer Food
industry 6
ISO 3657/1988 1 Periodic
review 1/10/2014 1/9/2014
Adoption
(reprint)
721/2000
Fats and oils – Determination
of saponification value Food
industry 7
ISO 6320/1995 1 Periodic
review 1/11/2014 1/10/2014
Adoption
(reprint)
742/1997
Fats and oils – Determination
of refractive index Food
industry 8
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Responsible
technical
committee
Fruits , Vegetables and derived
products
No. of Technical
committee (15)
Secretary of
Technical Committee
Eng. Hula Al
Hindawi
# Sector Proposal Process
type*
Start date End date Input Priority Notes
1 Food
Technology Apple
amendment
37/1999 1/2014 12/2014 Questionnaire 2
2 Food
Technology Unshelled pistachio preparation 1/2014 12/2014 Questionnaire 1
3 Food
Technology Global gap
amendment
1407/2009 1/2014 12/2014 Periodical review 1
4 Food
Technology
Methods of sampling and testing for jams
Amendment
49/1978 1/2014 12/2014 Periodical review 1
5 Food
Technology Table olives
Amendment
833/2006 1/2014 12/2014 Periodical review 1
6 Food
Technology Pickles
Amendment
73/2008 1/2014 12/2014 Periodical review 1
7 Food
Technology Potato chips
Amendment
505/2002 1/2014 12/2014
Periodical review 1
8 Food
Technology Deep frozen spinach
Amendment
463/2005 1/2014 12/2014
Periodical review 1
9 Food
Technology Quick frozen French fried potatoes
Amendment
1409/2005 1/2014 12/2014
Periodical review 1
10 Food
Technology Shelled pistachio
Amendment
319/2005 1/2014 12/2014
Periodical review 1
11 Food
Technology
Determination of sorbic acid content
Amendment
1262/1999 1/2014 12/2014
Periodical review 1
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Responsible
technical
committee
Fruits , Vegetables and derived
products
No. of Technical
committee (15)
Secretary of
Technical Committee
Eng. Hula Al
Hindawi
# Sector Proposal Process
type*
Start date End date Input Priority Notes
12 Food
Technology
Determination of benzoic acid content - Spectrophotometric
method
Amendment
1255/1999 1/2014 12/2014
Periodical review
1
13 Food
Technology
Determination of ash insoluble in hydrochloric acid
Amendment
1248/1999 1/2014 12/2014 Periodical review
1
14 Food
Technology Pine apples preparation 1/2014 12/2014
Agriculture
ministry request 1
15 Food
Technology Sweet potatoes preparation 1/2014 12/2014
Agriculture
ministry request 1
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Responsible
technical
committee
Fruits , Vegetables and derived
products
No. of Technical
committee (15)
Secretary of
Technical Committee
Eng. Hula Al
Hindawi
# Sector Proposal Process
type*
Start date End date Input Priority Notes
1 Food
Technology
Vegetables, fruits& derived products - Kaka
amendment
1/2014 12/2014 Questionnaire 4
2 Food
Technology
Vegetables, fruits& derived products - Hot sauces and chilli
amendment
1/2014 12/2014 Questionnaire 4
3 Food
Technology
Vegetables (fresh) - Dried fresh onions
Amendment
50/1997 1/2014 12/2014 Questionnaire 2
4 Food
Technology
Vegetables, fruits& derived products- canned vegetables
amendment 1/2014 12/2014 Technical study 4
5 Food
Technology
Vegetables, fruits& derived products - Quick frozen peas
Amendment
381//2005 1/2014 12/2014 Periodical review 1
6 Food
Technology
vegetables, fruits &derived products-canned mixed vegetables
Amendment
364/2006 1/2014 12/2014 Periodical review 1
7 Food
Technology
Vegetables, fruits & derived products - Canned okra
Amendment
362/2006 1/2014 12/2014
Periodical review
1
8 Food
Technology
Vegetables, fruits and derived products- Canned green beans and
Amendment 1/2014 12/2014
Periodical review 1
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Responsible
technical
committee
Fruits , Vegetables and derived
products
No. of Technical
committee (15)
Secretary of
Technical Committee
Eng. Hula Al
Hindawi
# Sector Proposal Process
type*
Start date End date Input Priority Notes
canned wax beans 220/2001
9 Food
Technology
Vegetables, fruits & derived products-Fenugreek
Amendment
1416/2006 1/2014 12/2014
Periodical review
1
10 Food
Technology
Vegetables, fruits & derived products- Herbs -Dried sage
Amendment
1413/2006 1/2014 12/2014
Periodical review
1
11 Food
Technology
Vegetables, fruits and derived products - Dried apricots
Amendment
1033/2002 1/2014 12/2014
Periodical review
1
12 Food
Technology
Vegetables, fruits derived products -Cashew kernels
Amendment
1058/1999
1/2014 12/2014
Periodical review
1
13 Food
Technology
Fruits and fruit products - Canned pears
Amendment
1104/1996 1/2014 12/2014
Periodical review
1
14 Food
Technology
Vegetables, fruits & derived products - Kamar al din
Amendment
173/2005 1/2014 12/2014
Agriculture
ministry request 1
15 Food
Technology
Vegetables, Fruits and derived products-Canned fruit cocktail
Amendment
313/2007 1/2014 12/2014
Agriculture
ministry request 1
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Responsible
technical
committee
Fruits , Vegetables and derived
products
No. of Technical
committee (15)
Secretary of
Technical Committee
Eng. Hula Al
Hindawi
# Sector Proposal Process
type*
Start date End date Input Priority Notes
16 Food
Technology
Vegetables - Fruits and derived products - canned peach
Amendment
343/2001 1/2014 12/2014
Periodical review
1
17 Food
Technology
Vegetables, Fruits and derived products- Canned pineapple
Amendment
356/2001 1/2014 12/2014
Periodical review
1
18 Food
Technology
Vegetables, fruits & derived products-Grape syrup (dibes)
Amendment
544/2005 1/2014 12/2014
Periodical review
1
19 Food
Technology
Vegetables, fruits and derived products - Peanuts
Amendment
681/2005 1/2014 12/2014
Periodical review
1
20 Food
Technology
Vegetables, fruits and derived products - Decorticated stone pine
nuts
Amendment
748/2005 1/2014 12/2014
Periodical review
1
21 Food
Technology
Vegetables, fruits and derived products - Walnut and walnut
kernels
Amendment
772/2005 1/2014 12/2014
Periodical review
1
22 Food
Technology
Vegetables, fruit & derived products - Grated desiccated
coconut
Amendment
780/2005 1/2014 12/2014
Periodical review
1
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Responsible
technical
committee
Fruits , Vegetables and derived
products
No. of Technical
committee (15)
Secretary of
Technical Committee
Eng. Hula Al
Hindawi
# Sector Proposal Process
type*
Start date End date Input Priority Notes
23 Food
Technology
Vegetables, fruits & derived products - Date syrup (dibes)
Amendment
812/2005 1/2014 12/2014
Periodical review
1
24 Food
Technology
Vegetables, fruits & derived products - Shelled sweet kernels of
apricots
Amendment
820/2005 1/2014 12/2014
Periodical review
1
25 Food
Technology
Vegetables - Fruits and derived products - canned mango pulp
Amendment
957/2001 1/2014 12/2014
Periodical review
1
26 Food
Technology
Vegetables, fruits and derived products - Shelled hazelnut kernels
Amendment
1774/2007
27 Food
Technology
Vegetables, fruits and derived products - Shelled sweet kernels of
almond
Amendment
1768/2007 1/2014 12/2014
Periodical review
1
28 Food
Technology
Vegetable products - Canned mature processed peas
Amendment
1127/1996 1/2014 12/2014
Periodical review
1
29 Food
Technology
Vegetable, fruits and derived products- Cabbages
Amendment
1982/2001 1/2014 12/2014
Periodical review
1
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Responsible
technical
committee
Fruits , Vegetables and derived
products
No. of Technical
committee (15)
Secretary of
Technical Committee
Eng. Hula Al
Hindawi
# Sector Proposal Process
type*
Start date End date Input Priority Notes
30 Food
Technology
Vegetables, Fruits and derived products- Cauliflower
Amendment
830/2001 1/2014 12/2014
Periodical review
1
31 Food
Technology
Vegetables (fresh) - Green sweet pepper
Amendment
69/1997 1/2014 12/2014
Periodical review
1
32 Food
Technology
Vegetables, fruits & derived products - Fresh unshelled peas
Amendment
580/2004
1/2014 12/2014
Periodical review
1
33 Food
Technology
Vegetables, fruits and derived products ـــ Processed tomato
concentrates
Amendment
41/2006 1/2014 12/2014
Periodical review
1
34 Food
Technology
Vegetable, fruits & derived products - Canned green peas
Amendment
225/2009 1/2014 12/2014
Periodical review
1
35 Food
Technology
Vegetables, fruits and derived products - Celery
Amendment
1375/2000 1/2014 12/2014
Periodical review
1
36 Food
Technology
Vegetables, fruits and derived products - Brussels Sprouts
Amendment
1377/2000 1/2014 12/2014
Periodical review
1
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Responsible
technical
committee
Fruits , Vegetables and derived
products
No. of Technical
committee (15)
Secretary of
Technical Committee
Eng. Hula Al
Hindawi
# Sector Proposal Process
type*
Start date End date Input Priority Notes
37 Food
Technology Fruits (fresh) - Plum
Amendment
1153/1998 1/2014 12/2014
Periodical review
1
38 Food
Technology
Vegetables ,fruits & derived products- Fresh figs
Amendment
1138/2004 1/2014 12/2014
Periodical review
1
39 Food
Technology
Vegetables, fruits and derived products - Peaches and nectarines
Amendment
1154/2003 1/2014 12/2014
Periodical review
1
40 Food
Technology
Vegetables, fruits and derived products - Cherry
Amendment
1329/2000 1/2014 12/2014
Periodical review
1
41 Food
Technology
Vegetables, fruits and derived products - Artichokes
Amendment
1333/2000 1/2014 12/2014
Periodical review
1
42 Food
Technology
Vegetables, fruits and derived products- Sweet chestnuts
Amendment
1353/1999 1/2014 12/2014
Periodical review
1
43 Food
Technology
Vegetables, fruits and derived products - Witloof chicory
Amendment
1374/2000 1/2014 12/2014
Periodical review
1
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Responsible
technical
committee
Fruits , Vegetables and derived
products
No. of Technical
committee (15)
Secretary of
Technical Committee
Eng. Hula Al
Hindawi
# Sector Proposal Process
type*
Start date End date Input Priority Notes
44 Food
Technology
Vegetables, fruits and derived products- Leeks
Amendment
1376/2000 1/2014 12/2014
Periodical review
1
45 Food
Technology
Vegetables , fruits & derived products - Guavas
Amendment
1403/2004 1/2014 12/2014
Periodical review
1
46 Food
Technology
Vegetables , fruits & derived products - Banana
Amendment
1405/2004 1/2014 12/2014
Periodical review
1
47 Food
Technology
Vegetables, fruits & derived products - Kamar al din
Amendment
173/2005 1/2014 12/2014
Periodical review
1
48 Food
Technology Fruits (fresh) - Table grapes
Amendment
26/1997 1/2014 12/2014
Periodical review
1
49 Food
Technology
Vegetables, fruits and derived products- Citrus fruit
Amendment
627/2001 1/2014 12/2014
Periodical review
1
50 Food
Technology
Vegetable, fruits and derived products - Peaches
Amendment
922/2002 1/2014 12/2014
Periodical review
1
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Responsible
technical
committee
Fruits , Vegetables and derived
products
No. of Technical
committee (15)
Secretary of
Technical Committee
Eng. Hula Al
Hindawi
# Sector Proposal Process
type*
Start date End date Input Priority Notes
51 Food
Technology
Vegetables, fruits and derived products- Canned grapefruit
Amendment
958/2001 1/2014 12/2014
Periodical review
1
52 Food
Technology
Vegetables , fruits & derived products - strawberries
Amendment
980/2001 1/2014 12/2014
Periodical review
1
53 Food
Technology
vegetables, fruits and derived products- watermelon
Amendment
984/2001 1/2014 12/2014
Periodical review
1
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Responsible
technical
committee
Pesticides No. of Technical
committee (59)
Secretary of
Technical Committee Hula Al Hindawi
# Sector Proposal Process
type*
Start date End date Input Priority Notes
1 Pesticides
PPP- Diazinon
Amendment
1264/1999
2/2014
12/2014
Periodical review
1
2 Pesticides
PPP- Deltamethrin
Amendment
1265/1999
2/2014 12/2014
Periodical review 1
3 Pesticides
PPP- Dimethoate
Amendment
1266/1999
2/2014 12/2014 Periodical review 1
4 Pesticides
PPP- 2,4 D
Amendment
1267/1999
2/2014 12/2014 Periodical review 1
5
Pesticides
PPP- Cypermethrin
Amendment
1268/1999
2/2014
12/2014 Periodical review 1
6 Pesticides
PPP- Fenvalerate
Amendment
1269/1999
2/2014 12/2014 Periodical review 1
7 Pesticides
PPP- Glyphosate
Amendment
1270/1999
2/2014 12/2014
Periodical review
1
8 Pesticides PPP- Thiram water-dipersible
granules
Amendment
1281/1999
2/2014 12/2014
Periodical review
1
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Responsible
technical
committee
Pesticides No. of Technical
committee (59)
Secretary of
Technical Committee Hula Al Hindawi
# Sector Proposal Process
type*
Start date End date Input Priority Notes
9 Pesticides
PPP- Pirimiphose-methyl
Amendment
1282/1999 2/2014 12/2014
Periodical review
1
10 Pesticides
PPP- Trifluralin
Amendment
1283/1999
2/2014 12/2014
Periodical review
1
11 Pesticides
PPP- Fosetyl Aluminum
Amendment
1290/1999
2/2014 12/2014
Periodical review
1
12 Pesticides
PPP-Captan
Amendment
1285/1999
2/2014 12/2014
Periodical review
1
13 Pesticides
PPP- Isoproturon
Amendment
1286/1999
2/2014 12/2014
Periodical review
1
14 Pesticides
PPP- Dicofol
Amendment
1287/1999
2/2014 12/2014
Periodical review
1
15 Pesticides
PPP- Benommyl
Amendment
1289/1999
2/2014 12/2014
Periodical review
1
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Dr. Hana'a
AlGhizzawi
Secretary of Technical
Committee 10 No. of Technical Committee Meat and meat products
Technical
Committee
(TC)
Notes
(references) Priority Input Date of finish Date of start Process Proposal Sector #
GSO 997:1998 1 Questionnaire
2014
1/3/2014 15/1/2014 Amendment
JS 174:2000
Meat and meat products - Fresh,
chilled and frozen (mutton and
goat) mea
Food
industry 1
EU Regulation
1234:2007 1
Request from the
Ministry of
Agriculture
30/5/2014 15/3/2014 Amendment
JS 574:2007
Poultry and eggs-Fresh chicken
eggs Food
industry 2
- 1 Periodic review 30/7/2014 15/5/2014 Amendment
JS 473:1995 Egg products - Dried eggs
Food
industry 3
GSO 997:1998 1 Periodic review 30/9/2014 15/7/2014 Amendment
JS 471:2002
Meat and meat products - fresh,
chilled and frozen beef meat
Food
industry 4
- 2 Periodic review 30/11/2014 15/9/2014 Amendment
JS 1587/2004
Meat and meat products -
Mechanically deboned poultry
meant intended for further
processing
Food
industry 5
GSO 1816:2007
Request from the
General
Association For
Jordanian Food
Traders
2014 - Amendment
JS 1371:2000
Meat and meat products - Minced
meat
Food
industry 6
- 2 Periodic review 2014 - Amendment
JS 1481/2002
Fish and fish products - Fresh
chilled fish
Food
industry 7
CODEX STAND.
3:1981
second revision
1995
2 Periodic review 2014 - Amendment
JS 312:2006 Fish- Canned salmon
Food
industry 8
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
- 2 Periodic review 2014 - Amendment
JS 1133:1998 Fish - Canned fish - Anchovies
Food
industry 9
- 2 Questionnaire
2014 2014 - preparation
Fish and fishery products ـ Quick
Frozen Fish Sticks (Fish Fingers),
Fish Portions and Fish Fillets -
Breaded or in Batter
Food
industry 10
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Dr. Hana'a
AlGhizzawi
Secretary of Technical
Committee 27 No. of Technical Committee Packaging
Technical
Committee
(TC)
Notes
(references) Priority Input Date of finish Date of start Process Proposal Sector #
EN 1230-
1:2009 1 Periodic review 1/3/2014 15/1/2014
Amendment
JS 1619-1:2004
Packaging - Paper and board
intended for contact with
foodstuffs - Sensory analysis
Part 1: Odour
Chemical
Engineering 1
EN 1230-
2:2009 1 Periodic review 30/5/2014 15/3/2014
Amendment
JS 1619-2:2004
Packaging - Paper and board
intended for contact with
foodstuffs -Sensory analysis
part 2: Off-flavour (taint)
Chemical
Engineering 2
ISO 21898:2004 2 Questionnaire
2014 309//2014 15/7/2014
Adoption
(translation)
Packaging -- Flexible
intermediate bulk containers
(FIBCs) for non-dangerous
goods
Chemical
Engineering 3
EN 862:2005 4 Periodic review 30/11/2014 15/9/2014 Amendment
JS 1609:2004
Packaging - Child-resistant
packaging - Reguirements and
testing procedures for non-
reclosable packages for non
pharmaceutical products
Chemical
Engineering 4
ISO 15394:2005 4 Periodic review 2014 - Amendment
JS 1586:2004
Packaging - Bar code and tow
- dimensional sybols for
shipping , tramsport and
receiving labels
Chemical
Engineering 5
reference
withdrawn 5 Periodic review 2014 -
Withdrawal
JS 757:1991
Containers - Aluminium foil
cateringcontainers
Chemical
Engineering 6
reference
withdrawn 5 Periodic review 2014 -
Withdrawal
JS 776:2001
Containers - Fresh vegetables
andfruits containers made
from expanded polystyrene
Chemical
Engineering 7
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
reference
withdrawn 5 Periodic review 2014 -
Withdrawal
JS 616:2005
Containers - Methods of test of blow
moulded polyolefin containers up to
5 liters capacity
Chemical
Engineering 8
reference
withdrawn 5 Periodic review 2014 -
Withdrawal
JS 617:2005
Containers-Blow molded
polyolefin containers up to 5
liters capacity-Specifications
Chemical
Engineering 9
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Dr. Hana'a
AlGhizzawi
Secretary of Technical
Committee 29 No. of Technical Committee
Food safety and hygienic
affairs
Technical
Committee
(TC)
Notes
(references) Priority Input Date of finish Date of start Process Proposal Sector #
GSO 1556
EU Regulation
2073:2005 1
Questionnaire
2010 1/2/2014 1/1/2011 preparation Microbiological criteria for food
Food
industry 1
CODEX STAND
192:1995 1
The withdrawal
of EU Directives
94 and 95
1/7/2014 1/2/2014 Amendment
JS 94:2010 General standard for food
additives Food
industry 2
CODEX STAND
193:1995 1
Request from the
technical
committee
and JFDA
30/12/2014 30/7/2014 preparation
General Standard for
Contaminants and Toxins in
Food and Feed
Food
industry 3
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Responsible
technical
committee
Cereals and pulses and derived
products
No. of Technical
committee (25)
Secretary of
Technical Committee
Eng. Nessma
Shannak
# Sector Proposal Process
type*
Start date End date Input Priority Notes
1 Food
Technology
Cereals, pulses and derived products – Wheat
amendment
1200/2013 WD 2013 plan 1
2 Food
Technology
Cereals, pulses and derived products – Biscuit
amendment FDJS 1/2014 2013 plan 1
3 Food
Technology
Cereals, pulses and derived products – Tehena
amendment
FDJS 1/2014 2013 plan
1
4 Food
Technology
Cereals, pulses and derived products – Rice
amendment FDJS 1/2014 2013 plan 1
5 Food
Technology
Cereals, pulses and derived products – Puffed corn
amendment FDJS 1/2014 2013 plan 1
6 Food
Technology
Cereals, pulses and derived products – Halweh tahenia
amendment FDJS 1/2014 2013 plan 1
7 Food
Technology
Cereals, pulses and derived products – Dried legumes
amendment 1/2014 5/2014 Periodical review 1
8 Food
Technology Food starch amendment 2/2014 6/2014 Periodical review
1
9 Food
Technology Starch Preparation 3/2014 7/2014 Periodical review
1
10 Food
Technology
Cereals, pulses and derived products – roasted coffee
amendment 4/2014 8/2014 Periodical review 1
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Responsible
technical
committee
Cereals and pulses and derived
products
No. of Technical
committee (25)
Secretary of
Technical Committee
Eng. Nessma
Shannak
# Sector Proposal Process
type*
Start date End date Input Priority Notes
11 Food
Technology
Cereals, pulses and derived products – Frozen dough
amendment 5/2014 9/2014 Periodical review 1
12 Food
Technology
Cereals, pulses and derived products – Green coffee
amendment 6/2014 10/2014 Periodical review 1
13 Food
Technology
Cereals, pulses and derived
products – Sesame seeds amendment 7/2014 11/2014 Periodical review
1
14 Food
Technology
Cereals and pulses - Determination of the mass of 1000 grains
amendment 8/2014 9/2014 Periodical review 2 ISO 520/2010
15 Food
Technology
Cereals and cereal products -Determination of total fat content
amendment 8/2014 9/2014 Periodical review 2 ISO11085/2008
16 Food
Technology
Cereals, plses and milled products - Sampling of static batches
amendment 8/2014 9/2014 Periodical review 2 ISO 24333/2009
17 Food
Technology
Flowing cereals and milled cereal products - Automatic sampling by mechanical means
amendment 8/2014 9/2014 Periodical review 2 ISO 24333/2009
18 Food
Technology
Cereals, pulses,and derived products - Enumeration of bacteria, yeast, and molds
amendment 8/2014 9/2014 Periodical review 2 ISO 21527-1/2008
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Responsible
technical
committee
Spices and condiments No. of Technical committee (55) Secretary of
Technical Committee
Eng. Nessma
Shannak
# Sector Proposal Process
type*
Start date End date Input Priority Notes
1 Food
Technology
Spices and condiments − Determination of extraneous matter and foreign matter content
Preparation FDJS 2/2014 2013 plan 1
2 Food
Technology
Spices and condiments –
Decorticated kernels of mahleb
cherries – Specifications Preparation FDJS
2/2014 2013 plan 1
3 Food
Technology
Spices and condiments – Dried
Rosemary – Specifications Preparation FDJS 2/2014
2013 plan 1
4 Food
Technology
Spices and condiments – Whole
and ground turmeric –
Specifications Preparation FDJS
2/2014 2013 plan 1
5 Food
Technology
Spices and condiments – Curry
powder – Specifications Preparation CD 5/2014 2013 plan 2
6 Food
Technology
Spices and condiments – Coriander
Preparation WD 5/2014 Periodical review 2
7 Food
Technology Spices and condiments – Fennel Preparation 2/014 6/2014 Periodical review 2
8 Food
Technology
Spices and condiments – Dried sweet marjoram
Preparation 3/2014 7/2014 Periodical review 2
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
9 Food
Technology Spices and condiments –Dill Preparation 4/2014 8/2014 Periodical review 2
10 Food
Technology Spices and condiments – Mestika Preparation 5/2014 9/2014 Periodical review 2
11 Food
Technology
Spices and condiments – spices and condiments mix
Preparation 6/2014 10/2014 Periodical review 2 SASO 2181/2003
12 Food
Technology
Spices and condiments – Dried
Parsley Preparation 7/2014 11/2014 Periodical review 2
13 Food
Technology
Spices and condiments – Dried
Mint Preparation 8/2014 12/2014 Periodical review 2
14 Food
Technology
Spices and condiments -- Determination of cold water-
soluble extract Preparation 9/2014 10/2014 Periodical review 3
ISO 941/1980
15 Food
Technology
Fruit and vegetable products -- Determination of dry matter
content by drying under reduced pressure and of water content by
azeotropic distillation
Preparation 9/2014 10/2014 Periodical review 3 ISO 1026/1982
16 Food
Technology
Spices and condiments -- Preparation of a ground sample
for analysis
Preparation 9/2014 10/2014 Periodical review 3 ISO 2825:1981
* Process Type: Preparation, review (amendment, withdrawal, or restructuring), or adoption.
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Eng. Reema
zoubi
Secretary of
Technical Committee 13
No. of
Technical Committee
Shelf lives and
labeeling
Technical Committee
(TC)
Notes Priority Input Date of finish Date of start Process Proposal Sector #
CD Periodical review 20/3/2014 20/9/2013 Amendment
538:2003
Milk and milk products-
pasteurized milk Food
industry 1.
Reference
amended in
2012
Periodical review
20/5/2014 20/11/2013
Amendment
116:2012
Milk and milk products-
Flavored milk Food
industry 2.
FDJS
Periodical review -- --
Amendment
796:2003
Milk and milk products-
Boiled white cheese
Food
industry 3.
FDJS
Periodical review
-- --
Amendment
4:2003
Milk and milk products-
Raw milk
Food
industry 4.
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
- 6 Periodical review 15/6/2014 15/1/2014 Amendment
44:2001
Ices- milk-ices, Ice
cream, water ices Food
industry 1.
- 5 Periodical review 20/6/2014 20/1/2014 Amendment
246:2006
Milk and milk products-
Soft cheese Food
industry 2.
4 Periodical review 25/6/2014 25/1/2014 Amendment
1605:2004 Milk and milk products -
Mixed soft cheese with
vegetable oils and/or fats
Food
industry 3.
7
Periodical review 30/6/2014 30/1/2014 Amendment
1520:2004 product-Mixed
processed cheese and
spreadable processed
cheese with vegatable
oils and / or fats
Food
industry
4.
8
Periodical review
15/7/2014 15/2/2014
Amendment
403:2002
Milk and milk products -
Flavoured yoghurt and
products heat - treated
after fermentation
Food
industry 5.
1 Periodical review
25/7/2014 25/2/2014
Amendment 1626:2007
Milk and milk products-
Milk powder mixed with
vegetable oils and /or
fats
Food
industry 6.
1 Periodical review
1/8/2014 1/3/2014
Amendment 135:2007
Milk and milk products-
Yoghurt and sweetened
yoghurt
Food
industry 7.
1 Periodical review
10/8/2014 10/3/2014
Amendment 121:2008
Milk and milk products -
Milk powder and cream
powder
Food
industry 8.
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
1 Periodical review
15/8/2014 15/3/2014
Amendment
1841:2008
Milk and milk products
– whey powders Food
industry 9.
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Eng. Reema
zoubi
Secretary of
Technical Committee -
No. of
Technical Committee
Specified
Committee
Technical Committee
(TC)
Notes Priority Input Date of finish Date of start Process Proposal Sector #
Reference
amended 1 Periodical review 20/10/2014 20/4/2014
Amendment
837:2006
Follow-up formula Food
industry 2.
Reference
amended
1 Technical
Committee 7/4/2014 -
Amendment 401:2001
Shelf lives for infant
and young children
foods
Food
industry 3.
Reference
amended
1 Periodical review
20/6/2014 20/12/2014
Amendment
443:2006
infant and young
children foods based on
cereals
Food
industry 4.
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Eng. Reema
zoubi
Secretary of
Technical Committee 9
No. of
Technical Committee
Drinks and
juices
Technical Committee
(TC)
Notes Priority Input Date of finish Date of start Process Proposal Sector #
Reference
amended Periodical review 1/10/2014 1/4/2014
Amendment
13:2007
Drinks and juices –
carbonated drinks Food
industry 1
Reference
amended
Periodical review
10/10/2014 10/4/2014
Amendment
77:2004
Drinks and juices –
flavored drinks and
concentrates.
Food
industry 2
Periodical review
15/10/2014 15/4/2014
Amendment
1148:2006 Drinks and juices -
Flavored drink powder Food
industry 3
Periodical review
- -
Amendment
558:2005
Drinks & juices -
Sweetened concentrated
natural fruit drink (Fruit
squashes)
Food
industry 4
FDJS Periodical review
Amendment
740:1999 Aromatic waters- water
of flowers Food
industry 5
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Sector Field subject Proposed by Priority
1:important 5: less
Comments
Animal feed stuffs feed stuffs Feedstuffs-Wheat used as
feedstuffs
Ministry of
Agriculture 3 No references available
Animal feed stuffs feed stuffs Feedstuffs-straw, hey and clover
used as feedstuffs
Ministry of
Agriculture 3 Turkish and Russian standards
Animal feed stuffs feed stuffs Feedstuffs-contaminants in
feedstuffs
Ministry of
Agriculture 3 EU regulations
Animal feed stuffs feed stuffs Feedstuffs-line seeds as
feedstuffs
Ministry of
Agriculture 3 Syrian standards
Animal feed stuffs feed stuffs Feedstuffs-feed additives Technical
committe 3 EU regulations
Animal feed stuffs feed stuffs Animal feeding stuffs-
Determination of crude ash
Technical
committee/
Ministry of
agriculture action
plan 2010
1 Final draft Jordanian standard
Animal feed stuffs feed stuffs
Animal feeding stuffs-
Determination of water-soluble
chlorides content
Action plan 2010 1 Final draft Jordanian standard
Animal feed stuffs feed stuffs
Animal feeding stuffs-
Determination of ash insoluble in
hydrochloric acid
Technical
committee/
Ministry of
agriculture action
plan 2010
1 Final draft Jordanian standard
Animal feed stuffs feed stuffs
Animal feeding stuffs-
Determination of nitrogen
content and calculation of crude
protein content-Kajeldahl
method
Technical
committee/
Ministry of
agriculture action
plan 2010
1 Final draft Jordanian standard
Animal feed stuffs feed stuffs
Feedstuffs – Poultry concentrates
(complementary) feeds
Ministry of
Agriculture 1 Draft Jordanian standard
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Animal feed stuffs feed stuffs
Feedstuffs – Finished feeds for
poultry
Ministry of
Agriculture 1 Draft Jordanian standard
Animal feed stuffs feed stuffs Feedstuffs – Seed meals
Action plan 2014 1 Review
Animal feed stuffs feed stuffs
Feedstuffs – animal by-products
meal
Action plan 2014 1 Committee draft
Animal feed stuffs feed stuffs
Feedstuffs – preparation of test
samples
Action plan 2014 1 Amendment
Animal feed stuffs feed stuffs Feedstuff Sorghum
Action plan 2014
2 Review
Animal feed stuffs feed stuffs
Feedstuff Sources of
manufactured phosphorous used
in feedstuff
Action plan 2014 2 Review
Animal feed stuffs feed stuffs Feedstuffs Rye used as feedstuff
Action plan 2014
2 Review
Animal feed stuffs feed stuffs Feedstuffs-Dry distilled grain
corn used to feed animals Action plan 2014
1 Final draft Jordanian standard
Animal feed stuffs feed stuffs
Feedstuffs – Processed finished
feeds for horses
Action plan 2014 2 Review
Animal feed stuffs feed stuffs Feedstuffs – Soybean meals
Action plan 2014
1 Amendment
Animal feed stuffs feed stuffs
Animal feeding stuffs —
Determination of nitrogen
content and calculation of crude
protein content — Part 2: Block
digestion and steam distillation
method
Action plan 2014 1 Committee draft
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Animal feed stuffs feed stuffs
Animal feeding stuffs − Semi-
quantitative determination of
aflatoxin B1−
Thinlayerchromatographic
methods
Action plan 2014 2 Review
Animal feed stuffs feed stuffs Animal Feeding stuffs −
Determination of aflatoxin B1 Action plan 2014
2 Review
Animal feed stuffs feed stuffs Feedstuffs – Determination of
silage PH Action plan 2014
2 Review
Animal feed stuffs feed stuffs Feedstuffs – Milk replacers for
baby calves Action plan 2014
2 Review
Animal feed stuffs feed stuffs Feedstuff − Determination of
tannin content in Sorghum Action plan 2014 2 Review
Animal feed stuffs feed stuffs Feedstuffs – Barley grains used
as feedstuffs
Technical
committee 1 Committee draft
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Animal feed stuffs feed stuffs Feedstuffs – Corn used as
feedstuff
Technical
committee 1 Committee draft
Animal feed stuffs feed stuffs Feedstuffs – Processed finished
feeds for horses
Licensed by
Action plan 2014 2 Review
Animal feed stuffs feed stuffs Labeling – General standard for
labeling feedstuff Action plan 2014 2 Review
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Responsible
technical
committee
Insulating materials No. of Technical
committee ()
Secretary of
Technical Committee Wesam qutaishat
# Sector Proposal Process
type*
Start date End date Input Priority Notes
1
Electric lifts Lifts and service lifts - Part one:
Safety rules for the construction
and installation of electric lifts
amendment
325/1988
1/2/2014 1
2
Electric lifts Lifts and service lifts - Part 10:
Specification for the testing and
examination of lifts and service lifts
- Section 10.1 - Electric lifts
amendment
1115/1996
31/12/2014 1
3
Electric
Escalators
Electric Escalators - dimensional
structure
Prepare
31/12/2014 2
4
Lifts hydraulic lifts
Prepare 31/12/2014
2
5
Batteries Batteries – Lead-acid starter
batteries
Part 1: General requirement and
methods of test
Review
382/2007
31/12/2014 1
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Responsible
technical
committee
Insulating materials No. of Technical
committee ()
Secretary of
Technical Committee Wesam qutaishat
# Sector Proposal Process
type*
Start date End date Input Priority Notes
6
Batteries Primary batteries - Part 1: Genera
Review
140/2007
31/12/2014
1
7
Batteries Primary batteries - Part 2: Physical
and electrical specifications
Review
140/2007
31/12/2014
1
8
Batteries Primary batteries - Part 3: Watch
batteries
Review
140/2007
31/12/2014
1
9
Batteries Primary batteries - Part 4: Safety of
lithium batteries
Review
140/2007
31/12/2014 1
10
Batteries Primary batteries - Part 5: Safety of
batteries with aqueous electrolyte
Review
140/2007
31/12/2014
1
* Process Type: Preparation, review (amendment, withdrawal, or restructuring), or adoption.
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Eng. Claudia
Zayadin
Secretary of
Technical Committee 4
No. of
Technical Committee Lubricating oils
Technical Committee
(TC)
Notes Priority Input Date of
finish
Date of
start Process Proposal Sector #
ISO 4925:2005
SAE
J1703:2004
1 Periodic Review
JS 466/2004 31/12/2014 1/1/2014 Review
Brakes - Synthetic brake
fluids Chemical
Engineering 1.
ISO 7308 1 Standardization
Department 31/12/2014 1/1/2014
Adoption
Brakes – hydraulic braking
system – ISO reference
petroleum base fluid
Chemical
Engineering 2.
SAE
J310:2005 1
Periodic Review
952:1997 31/12/2014 1/1/2014 Review
Greases - Lubricating
greases Chemical
Engineering 3.
SAE
J310:2005 1
Periodic Review
570:1988 31/12/2014 1/1/2014 Review
Greases - Consistency
classificationof lubricating
greases
Chemical
Engineering 4.
BS 148:2009 1 Periodic Review
993:1994 31/12/2014 1/1/2014 Review
Lubricating oils - New
insulating oils for
transformers and switch
gears
Chemical
Engineering 5.
ISO 8068:2006
BS 489:1999
DIN 51515-
2:2010
1 Periodic Review
JS 941:1993 31/12/2014 1/1/2014
Review
Mineral oils - Turbine oils Chemical
Engineering 6.
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Eng. Claudia
Zayadin
Secretary of
Technical Committee 22
No. of
Technical Committee Plastics
Technical Committee
(TC)
Notes Priority Input Date of
finish
Date of
start Process Proposal Sector #
EN 13476-3 1 Questionnaire
2011 31/12/2014 1/1/2014
Adoption
Plastics piping systems for non-
pressure underground drainage
and sewerage ـــ Structured-wall
piping systems of unplasticized
poly(vinyl chloride) (PVC-U),
polypropylene (PP) and
polyethylene (PE)
Part 3:Specifications for pipes
and fittings with smooth internal
and profiled external surface and
the system, Type B
Chemical
Engineering 1.
ISO
10467:2004
Amd1:2012
2 JS 2005:2012 31/12/2014 1/1/2014
Adoption
Plastics piping systems for
pressure and non-pressure
drainage and sewerage —
Glass-reinforced thermosetting
plastics (GRP) systems based on
unsaturated polyester
(UP) resin
Chemical
Engineering 2.
ISO 5774:2006 1
Market
Surveillance
department
31/12/2014 1/1/2014 Adoption
Plastics hoses — Textile-
reinforced types for compressed-
air applications — specification
Chemical
Engineering 3.
ISO
20126:2012 1
Questionnaire
2013 31/12/2014 1/1/2014
Adoption
Manual toothbrushes ــــ General
requirements and test methods Chemical
Engineering 4.
Egyptian
Standard
1613:2006
1
Periodic review
559:1988 31/12/2014 1/1/2014 Review Mats - Methods of testing plastic
mats Chemical
Engineering 5.
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Eng. Claudia
Zayadin
Secretary of
Technical Committee 22
No. of
Technical Committee Plastics
Technical Committee
(TC)
Notes Priority Input Date of
finish
Date of
start Process Proposal Sector #
Egyptian
Standard
1613:2006
1
Periodic review
560:1988 31/12/2014 1/1/2014 Review Mats - Plastic mats Chemical
Engineering 6.
Syrian
standard 2037:1998
GSO 476:1994
1 Periodic review
615:1989 31/12/2014 1/1/2014 Review
Ash-trays - Moulded plastic ash-
trays
Chemical
Engineering
7.
ASTM D4679 1 Questionnaire
2012 31/12/2014 1/1/2014 Preparation Plastic gloves
Chemical
Engineering 8.
ASTM F 2367-
04(2010) 1
Periodic review
1746:2007 31/12/2014 1/1/2014 Review Hand use brooms
Chemical
Engineering 9.
GSO 142:1991 1 Periodic review
111:2008 31/12/2014 1/1/2014 Review
Plastic - Tableware from
melamine material Chemical
Engineering 10.
No references 1 Committee request 31/12/2014 1/1/2014 Preparation PE Drinking water tanks Chemical
Engineering 11.
1 Periodic review
841:1992 31/12/2014 1/1/2014 Review Plastics - Plastic bowls
Chemical
Engineering 12.
ASTM D4635-
08 1
Periodic review
278:2003 31/12/2014 1/1/2014 Review
Plastics - Polyethylene films
made from low density
polyethylene for general use and
packaging applications -
Specifications
Chemical
Engineering 13.
1 Questionnaire
2013 31/12/2014 1/1/2014 Preparation Tweezers
Chemical
Engineering 14.
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Eng. Claudia
Zayadin
Secretary of
Technical Committee 22
No. of
Technical Committee Plastics
Technical Committee
(TC)
Notes Priority Input Date of
finish
Date of
start Process Proposal Sector #
1 Questionnaire
2013 31/12/2014 1/1/2014
Preparation Shower leaf
Chemical
Engineering 15.
1 Questionnaire
2013 31/12/2014 1/1/2014
Preparation Plastic dustpan
Chemical
Engineering 16.
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Annex
Eng. Claudia
Zayadin
Secretary of
Technical Committee 4
No. of
Technical Committee Plastics
Technical Committee
(TC)
Notes Priority Input Date of
finish
Date of
start Process Proposal Sector #
5 Periodic Review
JS 515:2008 31/12/2014 1/1/2014 Review
Plastics - Determination of
the melt mass-flow rate
(MFR) and the melt volume-
flow rate (MVR) of
thermoplastics
Chemical
Engineering 1.
5 Periodic Review
588:2004 31/12/2014 1/1/2014
Adoption
Plastics - Thermoplastic
films for use in agriculture
and horticulture (mulch)
Chemical
Engineering 2.
5 Periodic Review
10015-2:2007 31/12/2014 1/1/2014 Review
Buoyant aids for swimming
instruction Part 2: Safety
requirements and test
methods for buoyant aids to
be held
Chemical
Engineering 3.
5 Periodic Review
1479:2002 31/12/2014 1/1/2014 Review
Pipes - Polypropylene (pp)
pipes - Dimension Chemical
Engineering 4.
5
Periodic Review
1005:2003
31/12/2014 1/1/2014 Review
Pipes - Polyethylene (PE)
pipes for irrigation laterals -
Specifications
Chemical
Engineering 5.
5 Periodic Review
595:2006 31/12/2014 1/1/2014
Review
Pipes - Low density
polyethlene(PE) pipes -
General quality requiremenet
and testing
Chemical
Engineering 6.
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Eng. Claudia
Zayadin
Secretary of
Technical Committee 4
No. of
Technical Committee Plastics
Technical Committee
(TC)
Notes Priority Input Date of
finish
Date of
start Process Proposal Sector #
5 Periodic Review
197:2003 31/12/2014 1/1/2014 Review
Pipes - Unplasticized
polyvinyl chloride (PVC)
fittings with palin sockets for
pipes under pressure -
Laying lengths - Metric
series
Chemical
Engineering 7.
5 Periodic Review
587:2005 31/12/2014 1/1/2014 Review
Hoses - Water rubber hoses,
textile-reinforced, for general
purpose - Specifications
Chemical
Engineering 8.
5 Periodic Review
1722:2006 31/12/2014 1/1/2014 Review
Rubber or plastics and tubing
- Bending tests Chemical
Engineering 9.
5
Periodic Review
1723:2006
31/12/2014 1/1/2014 Review
Rubber and plastics hoses
and hose assemblies-
Hydrostatic testing
Chemical
Engineering 10.
5 Periodic Review
48:2004 31/12/2014 1/1/2014 Review
Hoses-General purpose,
textile-reinforced collapsible
plastics water hoses-
specifications
Chemical
Engineering 11.
5 Periodic Review
1728:2006 31/12/2014 1/1/2014 Review
Hoses -Rubber and plastic
hoses and hose assemblies-
Methods of measurement of
dimensions
Chemical
Engineering 12.
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Eng. Claudia
Zayadin
Secretary of
Technical Committee 4
No. of
Technical Committee Plastics
Technical Committee
(TC)
Notes Priority Input Date of
finish
Date of
start Process Proposal Sector #
5 Periodic Review
10133:2007 31/12/2014 1/1/2014 Review
Plastics piping systems for
industrial applications -
Polybutene (PB),
polyethylene (PE) and
polypropylene (PP) -
Specifications for
components and the system -
Metric series
Chemical
Engineering 13.
5 Periodic Review
1736:2006 31/12/2014 1/1/2014 Review
Plastics hoses and hose
assemblies - Textile -
reinforced types for
hydraulic applications -
Specification
Chemical
Engineering 14.
5 Periodic Review
1726-1:2006 31/12/2014 1/1/2014 Review
Rubber hoses & hose assemblies _
Textile-reinforced hydraulic types -
Specifications Part 1: Oil-based
fluid applications
Chemical
Engineering 15.
5 Periodic Review
1762-2:2006 31/12/2014 1/1/2014 Review
Rubber hoses and hose
assemblies -Textile-
reinforced hydraulic types-
Specifications Part 2:Water-
based fluid applications
Chemical
Engineering 16.
5 Periodic Review
1706:2006 31/12/2014 1/1/2014
Review
Pipes-Multilayer pipes from
cross linked polyethylene -
Aluminum-Cross linked
polyethylene (PEX-AL-
PEX)- Specifications
Chemical
Engineering 17.
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Eng. Claudia
Zayadin
Secretary of
Technical Committee 4
No. of
Technical Committee Plastics
Technical Committee
(TC)
Notes Priority Input Date of
finish
Date of
start Process Proposal Sector #
5 Periodic Review
765:2002 31/12/2014 1/1/2014 Review
Pipes - Polypropylene (p.p)
pipes (Type 1, Type 2, Type
3) - Specifications
Chemical
Engineering 18.
5 Periodic Review
1549:2007 31/12/2014 1/1/2014 Review
Pipes - Chlorinated polyvinyl
chloride (CPVC) pipes -
General quality requirements
and testing
Chemical
Engineering 19.
5 Periodic Review
1554:2004 31/12/2014 1/1/2014 Review
Pipes - Chlorinated polyvinyl
chloride (CPVC) pipes -
Dimensions
Chemical
Engineering 20.
5 Periodic Review
159:2007 31/12/2014 1/1/2014 Review
Pipes -Unplasticized
polyvinyl chloride - General
quality requirements and
testing method
Chemical
Engineering 21.
5 Periodic Review
569:2002 31/12/2014 1/1/2014 Review
Plastics - Standard test
methods for water vapor
transmission of material
Chemical
Engineering 22.
5 Periodic Review
579:2002 31/12/2014 1/1/2014 Review
Plastics - Standard
atmospheres for conditioning
and testing
Chemical
Engineering 23.
5 Periodic Review
1549:2007 31/12/2014 1/1/2014 Review
Pipes - Chlorinated polyvinyl
chloride (CPVC) pipes -
General quality requirements
and testing
Chemical
Engineering 24.
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Eng. Claudia
Zayadin
Secretary of
Technical Committee 4
No. of
Technical Committee Plastics
Technical Committee
(TC)
Notes Priority Input Date of
finish
Date of
start Process Proposal Sector #
5 Periodic Review
324-1:2002 31/12/2014 1/1/2014 Review
Plastics - Sympols and
abbreviated terms - Part 1:
Basic polymeter and their
special characteristics
Chemical
Engineering 25.
5 Periodic Review
324-2:2002 31/12/2014 1/1/2014 Review
Plastics - Symbols and
abbreviated terms - Part 2:
Fillters and reinforcing
materials
Chemical
Engineering 26.
5 Periodic Review
324-3:2002 31/12/2014 1/1/2014 Review
Plastics - Symbols and
abbreviated terms - Part 3:
Plasticizers
Chemical
Engineering 27.
5 Periodic Review
324-4:2002 31/12/2014 1/1/2014 Review
Plastics - Symbols and
abbreviated terms - Part 4 :
Flame retardants
Chemical
Engineering 28.
5 Periodic Review
589:2004 31/12/2014 1/1/2014 Review
Plastics - Polyethylene films
for use in protected green
houses
Chemical
Engineering 29.
5 Periodic Review
926:2002 31/12/2014 1/1/2014 Review
Plastics -Thermoplastic
polyester (TP) moulding and
extrusion materials -
Preparation of test specimens
and determination of
properties
Chemical
Engineering 30.
5 Periodic Review
543:2002 31/12/2014 1/1/2014 Review
Plastics - Methods for
determination of static
coefficient of friction and
kinetic coefficient of friction
for sheeting and plastic films
Chemical
Engineering 31.
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Eng. Claudia
Zayadin
Secretary of
Technical Committee 4
No. of
Technical Committee Plastics
Technical Committee
(TC)
Notes Priority Input Date of
finish
Date of
start Process Proposal Sector #
5 Periodic Review
1615:2004 31/12/2014 1/1/2014 Review
Cellular plastics and rubbers
- Determination of apparent
(bulk) density
Chemical
Engineering 32.
5 Periodic Review
581:2008 31/12/2014 1/1/2014 Review
Rubber and plastics -
Analysis of multi peak traces
obtained in determination of
tear strength and adhesion
strength
Chemical
Engineering 33.
5 Periodic Review
966:2007 31/12/2014 1/1/2014 Review
Palstic piping systems for
soil and waste discharge (low
and high temperatures)
within the building structure
- Un plasticized polyvinyl
chloride (U-PVC) -
Specifications for the pipes,
fittings and the system
Chemical
Engineering 34.
5 Periodic Review
1596:2004 31/12/2014 1/1/2014 Review
Plastics - Polyethylene
sheeting for construction,
industrial, and agricultural
applications
Chemical
Engineering 35.
5 Periodic Review
189-1:2008 31/12/2014 1/1/2014 Review
Plastic piping systems -
Polyethylene (PE) pipes and
fittings for water supply Part
1: General
Chemical
Engineering 36.
5 Periodic Review
189-2:2007 31/12/2014 1/1/2014 Review
Plastic piping systems -
Polyethylene (PE) pipes and
fitting for water supply Part
2: pipes
Chemical
Engineering 37.
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Eng. Claudia
Zayadin
Secretary of
Technical Committee 4
No. of
Technical Committee Plastics
Technical Committee
(TC)
Notes Priority Input Date of
finish
Date of
start Process Proposal Sector #
5 Periodic Review
10132:2007 31/12/2014 1/1/2014 Review
Plastics piping systems for
industrial applications -
(Acrylonitrile-Butadiene-
Styrene) (ABS),
Unplasticized poly(Vinyl
Chloride) (PVC-U) and
chlorinated poly (vinyl
chloride) (PVC-C) -
Specifications for comonents
and the system - Metric
series
Chemical
Engineering 38.
5 10062:2007 31/12/2014 1/1/2014 Review
Plastics piping systems for
industrial application - Poly
(Vinylidene fluoride)
(PVDF) - Specifications for
components and the system
Chemical
Engineering 39.
5
Periodic Review
10193-1:2007
31/12/2014 1/1/2014 Review
GRP tanks and vessels for
use above ground Part 1:
Raw materials - Specification
conditions and acceptance
conditions
Chemical
Engineering 40.
5 Periodic Review
10193-2:2007 31/12/2014 1/1/2014 Review
GRP tanks and vessels for
use above ground Part 2:
Composite materials -
Chemical resistance
Chemical
Engineering 41.
5 Questionnaire 2014 31/12/2014 1/1/2014 preparation
Feeding tanks, open and
closed extensibility
Chemical
Engineering 42.
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Eng. Claudia
Zayadin
Secretary of
Technical Committee 4
No. of
Technical Committee Plastics
Technical Committee
(TC)
Notes Priority Input Date of
finish
Date of
start Process Proposal Sector #
5 Questionnaire 2014 31/12/2014 1/1/2014 preparation Cold and hot water tanks Chemical
Engineering 43.
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Eng. Claudia
Zayadin
Secretary of
Technical Committee 4
No. of
Technical Committee Lubricating oil
Technical Committee
(TC)
Notes Priority Input Date of
finish
Date of
start Process Proposal Sector #
5
Standardization
Department
31/12/2014 1/1/2014
Preparation
Power steering fluid Chemical
Engineering 1.
5 Periodic Review
JS 392:2007 31/12/2014 1/1/2014
Adoption
Lubricating oils - Lubricating oils
for internal combustion engines Chemical
Engineering 2.
5 Periodic Review
JS 326:2003 31/12/2014 1/1/2014
Adoption
Lubricating oils -Automative
lubricating gear oils Chemical
Engineering 3.
5 Periodic Review
JS 354:2003 31/12/2014 1/1/2014
Adoption
Lubricating oils - Compressors
lubricating oils Chemical
Engineering 4.
5 Periodic Review
JS 327:2003 31/12/2014 1/1/2014 Review
Industrial gear oils - lubricating
oils Chemical
Engineering 5.
5 Periodic Review
JS 476:2003 31/12/2014 1/1/2014 Review Mineral oils - Hydraulic oils
Chemical
Engineering 6.
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Responsible
technical
committee
Renewable energy No. of Technical committee 51 Secretary of
Technical Committee
Eng. Suhair
Al Mhairat
# Sector Proposal Process type* Start date End date Input Priority Notes
1 Renewable
Energy
Solar Energy- Labeling of solar
water heater
Review
394/1999
30/01/2014 30/06/2014 Periodical
Review 1
2
Renewable
Energy
Thermal Solar System and
components-Factory made
systems
Part 2:Test methods
Adoption
1992-2/2011 30/01/2014 30/04/2014
Technical
committee 1
3 Renewable
Energy
Solar energy- Solar thermal
collectors- Test methods adoption
30/01/2014 30/04/2014 Technical
committee 2
4 Renewable
Energy
Solar energy-Flat plate solar
collector: Construction
requirements.
Review
434/1999 01/09/2014 31/12/2014
Periodical
Review 2
5 Renewable
Energy
Solar energy –Test methods for
solar collectors. Part 2:
Qualifications test procedures.
Review
435-2/1999 01/03/2014 31/12/2014
Periodical
Review 2
* Process Type: Preparation, review (amendment, withdrawal, or restructuring), or adoption.
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Responsible
technical
committee
Renewable energy No. of Technical
committee 51
Secretary of
Technical Committee
Eng. Suhair
Al Mhairat
# Sector Proposal Process
type*
Start date End date Input Priority Notes
6 Renewable
Energy
Solar energy –Test methods for
solar collectors. Part 1:Thermal
performance of glazed liquid
heating collectors including
pressure drop.
Review
435-1/1999 01/03/2014 31/12/2014
Periodical
Review 2
7 Renewable
Energy
Solar energy- Domestic water
heating systems. Part 2:Outdoor
test methods for system
performance characterization and
yearly performance prediction of
solar-only systems.
Review
1224-
2/1999
01/05/2014 31/12/2014 Periodical
Review 2
8 Renewable
Energy
Solar energy- Domestic water
heating systems. Part 3:
Performance test for solar plus
supplementary systems.
Review
1224-
3/1999
01/09/2014 31/12/2014 Periodical
Review 2
9 Renewable
Energy
Solar energy- Domestic water
heating systems. Part
1:Performance rating procedure
using indoor test methods.
Review
1224-
1/1999
01/09/2014 31/12/2014 Periodical
Review 2
* Process Type: Preparation, review (amendment, withdrawal, or restructuring), or adoption.
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Responsible
technical
committee
Detergents No. of Technical
committee 51
Secretary of
Technical Committee
Eng. Suhair
Al Mhairat
# Sector Proposal Process
type*
Start date End date Input Priority Notes
10 Renewable
Energy
Thin film terrestrial
photovoltaic(PV) modules-
Design qualification and type
approval
Adoption
IEC 61646 1/11/2014
2015 Market needs 3
11 Renewable
Energy
Crystalline silicon terrestrial
photovoltaic(PV) modules-
Design qualification and type
approval.
Adoption
IEC 61215 1/12/2014
2015 Market needs 3
12 Renewable
Energy
Photovoltaic devices- Procedure
for temperature and irradiance
corrections to measured I-V
characteristics
Adaption
IEC 60891 2015
2015 Market needs 3
13 Renewable
Energy
Photovoltaic devices- Part
1:Measurement of photovoltaic
current-voltage characteristics.
Adoption
IEC
60904-1
2015 2015 Market needs 3
Jordan Standards and Metrology Organization Annual Standards and technical regulations action plan 2014
Responsible
technical
committee
Detergents No. of Technical
committee 51
Secretary of
Technical Committee
Eng. Suhair
Al Mhairat
# Sector Proposal Process
type*
Start date End date Input Priority Notes
14 Renewable
Energy
Photovoltaic systems- Power
conditioners- Procedure for
measuring efficiency
Adoption
IEC 61683 2015 2015 Market needs 3
15 Renewable
Energy
UV test for photovoltaic
(PV)modules
Adaption
IEC 61345 2015 2015 Market needs 3
* Process Type: Preparation, review (amendment, withdrawal, or restructuring), or adoption.