Embed Size (px)
Citation preview
JORDAN PETROLEUM REFINERY CO. LTD. Diesel Specification
QS-PL 112 Laboratories & Quality Control Department
Title : Specification for Automotive Fuel_Diesel 1
Issued: March, 2018 Issue: 2 (Rev.3) QMS – QS-PL112/ HQ Page: 1 of 1
Tel. No. : + 962-6-4630151 E-mail : [email protected] Fax. No. : + 962-6-4657934 P.O.Box: 1079 Amman 11118- Jordan
S.N Characteristics Test Method Control Limits
1 Appearance - Visual inspection B&C2
2 Density @ 15 ˚C g / ml ASTM D4052 0.820 - 0.845
3 Distillation: ASTM D86
3.1 Recovered @ 250 ˚C Volume % Max. < 65
3.2 Recovered @ 350 ˚C Volume % Min. 85
3.3 95% Volume Recovered @ ˚C Max. 370
4 Total Sulfur Mass % ASTM D4294 Max. 1.2
5 Flash Point (P.M.C.C) ˚C ASTM D93A Min. Above 55.0
6 Kinematic Viscosity @ 40 ˚C cSt. ASTM D7042 2.000 - 4.500
7 Cold Filter Plugging Point (CFPP) ˚C ASTM D6371 Max. 0.0 (summer) Max. -10 (Winter)
8 Corrosion Copper (3 hrs @ 50 oC) Rating ASTM D130 Class.1
9 Carbon Residue on 10% Mass % ASTM D189 Max. 0.30
10 Ash Content Mass % ASTM D482 Max. 0.010
11 Cetane Index - ASTM D976 Min. 46.0
12 Cetane Number - ASTM D613 Min. 51.0
13 Water Content Volume % ASTM D95 Max. 0.02
14 Total Acid Number mg KOH / g ASTM D974 Max. 1.0
15 Color ASTM ASTM D1500 Max. 2.5
16 Lubricity (HFRR) µm ASTM D6079 Max. 460
17 Polycyclic aromatic hydrocarbons Mass % IP391 Max. 8.0
18 Manganese Content mg/L ASTM D3831 Max. 2.0
19 Total contamination mg/kg IP440 Max. 24
20 FAME Content Volume % EN14078 Max. 7.0
21 Oxidation Stability g/m
3
ASTM D2274 Max. 25
hrs. Min. 20
1 This specification is based on Jordanian Technical Regulation for Diesel # JS 195/2016 (4th edition) dated on the 17th of August, 2016. Except total sulfur.
2 Clear, bright and visually free from solid matter and undissolved water at ambient fuel temperature. 3 JPRC guarantees no FAME and Manganese were added to this product.
JORDAN PETROLEUM REFINERY CO. LTD. Super Diesel Specification
QS-PL 113 Laboratories & Quality Control Department
Title : Specification for Super Diesel
Issued: March, 2018 Issue: 2 (Rev.2) QMS – QS-PL113 / HQ Page: 1 of 1 Tel. No. : + 962-6-4630151 E-mail : [email protected] Fax. No. : + 962-6-4657934 P.O.Box: 1079 Amman 11118- Jordan
S.N Characteristics Test Method Control Limits
1 Appearance - Visual inspection B&C2
2 Density @ 15 ˚C g / ml ASTM D4052 0.820 - 0.845
3 Distillation: ASTM D86
3.1 Recovered @ 250 ˚C Volume % Max. < 65
3.2 Recovered @ 350 ˚C Volume % Min. 85
3.3 95% Volume Recovered @ ˚C Max. 370
4 Total Sulfur Mass % ASTM D4294 Max. 0.70
5 Flash Point (P.M.C.C) ˚C ASTM D93A Min. Above 55.0
6 Kinematic Viscosity @ 40 ˚C cSt. ASTM D7042 2.000 - 4.500
7 Cold Filter Plugging Point (CFPP) ˚C ASTM D6371 Max. 0.0 (summer) Max. -10 (Winter)
8 Corrosion Copper (3 hrs @ 50 oC) Rating ASTM D130 Class.1
9 Carbon Residue on 10% Mass % ASTM D189 Max. 0.30
10 Ash Content Mass % ASTM D482 Max. 0.010
11 Cetane Index - ASTM D976 Min. 46.0
12 Cetane Number - ASTM D613 Min. 51.0
13 Water Content Volume % ASTM D95 Max. 0.02
14 Total Acid Number mg KOH / g ASTM D974 Max. 1.0
15 Color ASTM ASTM D1500 Max. 2.5
16 Lubricity (HFRR) µm ASTM D6079 Max. 460
17 Polycyclic aromatic hydrocarbons Mass % IP391 Max. 8.0
18 Manganese Content mg/L ASTM D3831 Max. 2.0
19 Total contamination mg/kg IP440 Max. 24
20 FAME Content Volume % EN14078 Max. 7.0
21 Oxidation Stability g/m
3
ASTM D2274 Max. 25
hrs. Min. 20
1 This specification is based on Jordanian Technical Regulation for Diesel # JS 195/2016 (4th edition) dated on the 17th of August, 2016. Except total sulfur. 2 Clear, bright and visually free from solid matter and undissolved water at ambient fuel temperature 3 JPRC guarantees no FAME and Manganese were added to this product.
