Upload
hpham2005
View
216
Download
0
Embed Size (px)
Citation preview
8/3/2019 Joliet Jec-htm1800 Data Sheet
1/4
HTM1800 AC Drilling Motor
Joliet Equipment Corporation...the quality source for
Drilling Motors.
For more than 70 years
our motors have delivered
Quality, Value and Reliability...
Day-inDay-out.
The Joliet Horizontal AC Drilling Motor delivers a continuous 1800 HP rating for mud pump and rotarytable applications and boasts an impressive intermittent rating of 2250HP for drawworks duty. Thecontinuous rating is at 600VAC, 1600 Amperes, 45.6Hertz, 800/3000 RPM.
Joliets HTM1800 has proven reliability throughout the drilling & marine industries and continues tomeet & exceed all expectations. The Joliet HTM1800 provides competitive pricing and unsurpassedquality.
Joliet Equipment CorporationP.O. Box 114
Joilet, Illinois 60434 USA
(800) 435-9350 (713) 467-7559
Fax: (713) 467-7887
www.joliet-equipment.com tractionmotors.com
8/3/2019 Joliet Jec-htm1800 Data Sheet
2/4
Features
Form Wound 6-Pole Stator.
Class H Insulation.
Copper Alloy Rotor Bars and End Rings.
Inverter Duty.
4532 Alloy High Strength Forged Shaft for
Radial Load.
OPE Insulated Bearing.
Pressurized connection box (IP56) mounted on leftside of motor as viewed from commutator end, withbolt on cable connections and terminations for
pressure sensor, thermostat, space heater, lock-out switch & blower unit. Connection box can be
specied on right side.
DE- Roller Bearing for Axial Load.
Blower Assembly; 25hp Explosion Proof, 3 Phase,
60 Hz, 460 Volts. Pressure sensor, Explosion Proof.
Space Heater, 120/240 Volt, Explosion Proof.
(6) Winding RTDs (100 Ohm).
Speed Sensor Mount.
Motor is dimensionally interchangeable with a GE752 motor.
Motor Enclosure: IP44.
Altitude Below 3,300 FT.
Approx. Weight: 8,400 Lbs. 3,810 Kg.
Three Key
Features
Distinguish
Joliets HTM1800
From The
Competition
1DimensionallyInterchangeablewith the 752
(no variances inblower mounts, nowelded feet, etc.)
2Competitively Priced
3Superior Quality
Joliet HTM1800 Drive End View Joliet HTM1800 Opposite Drive End
Copper Bar Squirrel Cage Rotor with
4532 Alloy High-Strength Forged
Shaft for Radial Load
8/3/2019 Joliet Jec-htm1800 Data Sheet
3/4
Performance / Specications
ENGINEERING DATA
Motor Performance Curve see above
Ventilation 60m3/min. 2200Pa at 800 min-1
Insulation Class H
Maximum Service Speed: 3000 min-1
Over speed: 3600 min-1 Dielectric Test: 4025 V
Noise (@ No-Load): Approx. 91 dB(A) at
1m from motor frame
Bearing Type: Gear Side: Roller Bearing;
Opp. Gear side: Roller Bearing
(6) Winding RTDs
240 V, 1 heaters
Rating: Continuous Intermit tent
Output (HP) 1800 2250
Output (KW) 1342 1678
Voltage (V) 600 600
Current (A) 1600 2100Speed (min-1) 900 800
Frequency (HZ) 45.6 40.7
Efciency (%) 95.0 95.0
Power Factor (%) 85 82
Slip (%) 1.3 1.7
Current(A),Voltage(V)
15.00
3000
2000
1000
0
Voltage 600
Current 1600 A Current 2100 A
Torque 10.5* 103 ft-LB
Torque 14.8* 103 ft-LB Intermittent
60 sec. on, 30 sec. off
(Short Time Duty)
1800HP Continuos Area
900 Lo 1800min-1
(Continuous Duty)
0 500 1000 1500 2000 2500 3000
0
5
10
15
Speed (RPM)
Torque(ft-lb*103)
Intermittent
60sec on, 30sec off
(Short time Duty)
Joliet Equipment Corporation
8/3/2019 Joliet Jec-htm1800 Data Sheet
4/4
Joliet Equipment CorporationP.O. Box 114
Joilet, Illinois 60434 USA
(800) 435-9350 (713) 467-7559
Fax: (713) 467-7887
www.joliet-equipment.com tractionmotors.com
HTM1800 Dimensions
16.5
10.5
16.5
APPRO
X.
38
17.7
1818
36
APPROX. 29
APPROX. 50
1.75
8.41
1.37
5.25
4.25
9.5310.9
23.12
APPROX. 59.1
AIR OUTLET
PRESSURE SWITCH
CUT OUT SWITCH
BLOWER
AIRIN
LET
4.85
19
4.7
50
TAPPERED
SHAFT
1.2
5\FT.
Not to be used for construction. Approximate Weight: 8,400 lbs Dimensions are in inches.
Drive End