Johns Hopkins Hospital Medical Baltimore, MD Office Building Evan Hughes Mechanical http://www.arche.psu.edu/thesis/eportfolio/current/portfolios/eph114/ Project Team Architect - ZGF, Washington DC CM - Atlantic Builders, Baltimore MD MEP - Leach Wallace Assoc, Baltimore MD Structural - Columbia Engineering, Columbia MD The MOB is a multi-use medical facility with space for offices, examination rooms, administrative areas and special use areas. The dedicated areas are used for dialysis, phle- botomy examination, laser treatment, radiology, and infusion. Architecture Site size is 38,600 sq ft Building size is 88,260 sq ft Four stories, three above grade Total projected cost 15.5 million Dates of Construction June 2005 - March 2006 Mechanical Six York rooftop dx package units provide 120,000cfm of supply air. for a total of 367.5 tons of cooling. All heating in the dx rooftop units is performed with electric coils and VAV boxes are also equipped with electric reheat coils. Hot water is provided by a 225 gallon electric hot water heater. Oxygen is supplied to the MOB at 55psig via a 1” supply line, tapped off the main oxygen storage facility. Electrical The buildings main panel is a 2500KVA panel in the main electrical room in the basement. There are individual panels on each floor fed through a 3000KVA main switchgear. Emergency power is provided by a genera- tion facility located in the adjacent parking garage. Structural The building makes use of a braced steel frame. The columns support wideflange girders which in turn support open web joists.

Johns Hopkins Hospital Medical Evan Hughes Baltimore, MD ... · Johns Hopkins Hospital Medical Baltimore, MD Office Building Evan Hughes Mechanical Project Team

Download PDF Report

Upload
others
View
4
Download
0

Embed Size (px)

Citation preview

Johns Hopkins Hospital Medical Baltimore, MD Office Building

Evan Hughes Mechanical

http://www.arche.psu.edu/thesis/eportfolio/current/portfolios/eph114/

Project TeamArchitect - ZGF, Washington DCCM - Atlantic Builders, Baltimore MDMEP - Leach Wallace Assoc, Baltimore MDStructural - Columbia Engineering, Columbia MD

The MOB is a multi-use medical facility with space for offices, examination rooms, administrative areas and special use areas. The dedicated areas are used for dialysis, phle-botomy examination, laser treatment, radiology, and infusion.

ArchitectureSite size is 38,600 sq ftBuilding size is 88,260 sq ftFour stories, three above gradeTotal projected cost 15.5 millionDates of Construction June 2005 - March 2006

Mechanical Six York rooftop dx package units provide 120,000cfm of supply air. for a total of 367.5 tons of cooling. All heating in the dx rooftop units is performed with electric coils and VAV boxes are also equipped with electric reheat coils. Hot water is provided by a 225 gallon electric hot water heater. Oxygen is supplied to the MOB at 55psig via a 1” supply line, tapped off the main oxygen storage facility.

Electrical The buildings main panel is a 2500KVA panel in the main electrical room in the basement. There are individual panels on each floor fed through a 3000KVA main switchgear. Emergency power is provided by a genera-tion facility located in the adjacent parking garage.

Structural The building makes use of a braced steel frame. The columns support wideflange girders which in turn support open web joists.