-
THE
JG LAYFLAT® PIPE
PUSH-FIT PEOPLE
INSTALLING PIPE JUST GOT EASIER.
CASE STUDY EXPERT CONTACT CARDS LATESTHanse Haus Ask Dave Our
Sales Team Double Check
Service Valve
Keeping you connected with the wor ld leading manufacturer.
ISSUE 001 | OCTOBER 2013
[email protected]
John Guest Speedfit Limited
Horton Road, West Drayton, Middlesex UB7 8JL, England.Tel: 01895
449233 Fax: 01895 420321 www.speedfit.co.uk |
www.speedfitUFH.co.uk
Technical Help Desk: 01895 425333
, and are registered trademarks of John Guest International
Limited © Copyright 2013.
JG LAYFLAT®
-
CONTENTSP03. NEWSLayflat Competition winners and College
Presentations.
P05. COVER STORYJG Layflat® Pipe
P07. CASE STUDYJG UFH is in the Haus.
P11. PUSH-FIT EXPERTAsk Dave.
P07. PUSH-FIT IN THE COMMUNITYOur Charity work.
P15-16. DATESPush-fit diary and latest updates.
THEPUSH-FIT PEOPLE
WELCOMEI AM DELIGHTED TO WELCOME YOU TO THE FIRST ISSUE OF THE
JG SPEEDFIT NEWSLETTER – ‘THE PUSH-FIT PEOPLE’.
Whilst I struggle to comprehend
that we are already trading
towards the final quarter of 2013
and that my thoughts are slowly
turning to the new business year
ahead, I start to reflect on what
has been another very exciting
year for the JG Speedfit team so far.
Despite the challenging market conditions we have
continued to grow our business and market share,
which is a real credit not only to our entire team,
but also to our extremely loyal customers who
have continued to put their faith in our products
and services.
Following huge levels of customer demand over
many years, 2012 was the launch year of our
JG Layflat® Pipe range. During 2013 we have
experienced an incredible level of demand, which
at times has been challenging - par ticularly from a
production perspective.
Being a private, family owned company we don’t
have to answer to shareholders, corporate
management or wade through the layers of
hierarchical pyramids. As a result, when the decision
was made to launch the product we were able
to mobilise the capital investment and resource
to give our loyal and potential new customers a
product they had requested for a number of years.
JG Layflat® pipe has been an incredible catalyst for
exponential growth this year impacting on pipe,
fittings and Underfloor Heating sales.
Our outlook for the rest of 2013 remains positive and
we are well placed to continue driving sales across our
pipe, fittings and Underfloor Heating business whilst
continuing to identify new product opportunities and
improving our overall service.
It is my hope that you will enjoy reading the first
of many issues of ‘The Push-fit People’ and we look
forward to keeping you connected with all things JG
Speedfit during future editions.
Mike Riseley - UK Director of Sales
P01ISSUE 001 | OCTOBER 2013
P02ISSUE 001 | OCTOBER 2013
JG WELCOME
CONTACTJohn Guest Speedfit Limited
Horton Road, West Drayton, Middlesex UB7 8JL, England.Tel: 01895
449233 Fax: 01895 420321 Email:
[email protected] | www.speedfitUFH.co.uk
Technical Help Desk: 01895 425333
-
P03ISSUE 001 | OCTOBER 2013
THEPUSH-FIT PEOPLE
SPEEDFIT NEWSJG LAYFLAT® PIPE ‘LAYS’ WINNERS JG Speedfit was
delighted to announce the winners
of the JG Layflat® pipe promotion competition held
earlier this year.
The 46” Smart TV went to Ady Dyer of Elite
Bathroom Design in Leicester and the two iPads
were given to Andrew Morgan from Suffolk and
Gary Hamlin from Weymouth.
Andrew was eager to share his experience installing
JG Layflat® pipe, describing it as a “God send for
installers”. His stockist, Double Quick, endorsed the
view by commenting “Layflat pipe is a new product that
is causing discussion at our very busy trade counter”.
Congratulations to all the winners!
TEAM UP The JG Speedfit Underfloor Heating team recently
partnered with Southern and Scottish Energy (SSE) to
support SSE’s new Renewable Energy Training Centre
in South Wales.
Earlier this year, Craig Newton, Area Sales Manager, and
Nigel Sanger, Technical Manager, had meetings with SSE
who were looking for a partner to help support their
new state-of-the-art training facility in Cardiff.
We were happy to support the initiative supplying a
complete set of JG UFH demo products and controls,
as well as multimedia streaming the latest JG UFH
installation video tutorials.
COLLEGE PRESENTATIONSWe have recently developed a college
training module
specifically designed to bring practical knowledge and
best installation know-how to plumbing students all
around the country.
Created in collaboration with The City of Bath College
and Coleg Morgannwg, Aberdare, the new teaching
material includes presentations and video tutorials
featuring topics such as the advantages of plastic
plumbing, pressure-testing techniques, British standards
of installation and much more. Interactive web-based
applications teaching students the basics of UFH are
also available through the Speedfit UFH website.
Regular college visits by JG Speedfit technical engineers
will expose students to first-hand industry expertise,
ensuring that all topics are brought to life through
practical examples.
The training initiative will be included within the
curriculum of some of the top plumbing colleges
throughout the UK and will commence at the start of
the new academic year in September.
PUSH-FIT NEWS
We are looking forward to once again rewarding some
of our loyal Layflat converts and welcoming new with
a new JG Layflat® pipe competition - ‘Cash for Coils’.
The promotion will run from 16th September - 6th
December 2013, with prizes including Love2Shop
vouchers worth up to £1000 and runners-up prizes of
JG Layflat® coils.
To enter the competition simply fill in your contact
details on the back of the card found in each 25m and
50m JG Layflat® pipe coil and send it back to JG Speedfit.
Alternatively, contestants may register for the prize draw
online at the dedicated Layflat competition page on the
company website, www.speedfit.co.uk. When registering
for the competition online, don’t forget to enter the
unique code found on the back of the card.
For those who wish to register through their smart
phone, just scan the QR code underneath.
Mike Riseley, UK Director of Sales, JG Speedfit, said,
“After the great response of the first Layflat pipe
promotion held recently, we are delighted to announce
this new and exciting competition!”
The prize draw will be held on 7th December 2013.
CASH FOR COILS
WIN!!
Scan Code to EnterP04
ISSUE 001 | OCTOBER 2013
PUSH-FIT COMPETITION
For more information follow us on Twitter, Facebook and
YouTube.
1st Prize £1,000 Love2Shop Vouchers
2nd Prize £750 Love2Shop Vouchers3rd Prize £500 Love2Shop
Vouchers
Plus!7x Runner up prizes of Layflat Pipe!
-
FLAT OUTWe are proud of a recent addition to our product range -
JG Layflat® pipe, as it truly represents the company’s objective to
provide cutting-edge plumbing and heating solutions that allow for
swift, smooth and easy installations.
The JG Layflat® pipe simply lays flat, stays flat and is ultra
flexible, allowing greater control and ease of movement making it
possible for a single person to meander and route the pipe as they
wish.
Transporting the JG Layflat® pipe is hassle-free in comparison
to copper equivalents, requiring no ‘clumsy’ installation tool
boxes, being very light to carry and compact enough to be loaded
into a small space whilst moving from the shop to the construction
site. Regardless of whether you are using a 25m or a 150m JG
Layflat® coil, the pipe is consistently easy to remove from the
packaging.
Once installed, JG Layflat® pipe proves to save energy due to
the specific thermal conductivity properties of plastic, allowing
minimal heat loss, which makes it the perfect choice for any UFH
system, especially when powered by condensing boilers,
ground-source and air-source heat pumps.
Thanks to the inbuilt barrier layer, which prevents the ingress
of air, as well as the smooth inner surface of JG Layflat® pipe, a
permanent unrestricted flow through the system can be assured as no
limescale or corrosion would build up within the lifetime of the
product. That on its own offers significant efficiency as the
power
needed to pump fluids throughout the circuit would not be
expected to increase over time due to corrosion clogs.
The new JG Layflat® polybutylene pipe is the perfect component
for most sustainable and energy efficient domestic heating
technologies, while the ease of use, speed of installation and
lifelong reliability of the product make it ideal for any plumbing
project where precision and impeccable quality are paramount.
P05ISSUE 001 | OCTOBER 2013
For more information on JG Layflat®, visit the JG Speedfit
website at www.speedfit.co.uk where video installation guides are
also available.
THEPUSH-FIT PEOPLE
P06ISSUE 001 | OCTOBER 2013
PUSH-FIT COVER STORY
Layflat PipeLAYS FLAT - STAYS FLAT - ULTRA FLEXIBLE
“simply lays flat, stays flat and is
ultra flexible”
“ease of use, speed of installation,
lifelong reliability”
-
P08ISSUE 001 | OCTOBER 2013
EQUIPPED WITH JG SPEEDFIT UNDERFLOOR HEATING, THE NEW ODDINGTON
HANSE HAUS HOLDS TRULY OUTSTANDING ENERGY-SAVING PROPERTIES.The
Oddington ProjectDesigned by Hanse Haus Ltd, the new-build
Oddington
dwelling is defined by its high sustainability credentials
and great aesthetic value.
The house is a four-bedroom, two-storey building with
total quadrature of 235.94m2. Given the size of the
property, choosing the right heating system is of crucial
importance for ensuring efficiency.
The main source of heat for the Oddington Hanse
Haus is a ground-based heat pump, which as a concept
is gradually proving to be the renewable technology of
the future. The system is using a vapour compression
cycle, where pumps take low-grade warmth and
concentrates it to a higher temperature that is then
used to heat up the building.
Due to the low temperature flow at which the heat
pump operates, UFH is the ideal technology for
distributing warmth throughout the house.
JG Speedfit’s Involvement Being the sole plumbing and heating
contractor of
Hanse Haus for the UK, Synergy PHR has appointed
JG Speedfit as the exclusive supplier of the Underfloor
Heating system installed.
Darren Farley, director of Synergy PHR commented -
“Since partnering with Hanse Haus in May 2012 Synergy
have carried out installations in seven properties in
the UK, all with full ground and first floor UFH by JG
Speedfit. We have used both staple and Overfit systems
that proved to be very easy to install, saving time and
effort. The cooperation with the push-fit people was
very satisfying from the initial contact with their sales
representative, through to CAD specification, delivery
and installation. On completion, the JG Speedfit
engineers and technical support were always there to
help with system setup, testing and control.”
JG Speedfit offered Synergy PHR comprehensive after-
sales support, assisting throughout all project stages
with a particular focus on pipe layout design and
installation advice.
The Advantages of the JG Speedfit UFH SystemThe technology
behind the JG Speedfit UFH model
is similar to the philosophy behind the Hanse Haus
concept - innovation towards energy preservation and
efficiency, comfort, aesthetics and value for money.
The benefits of our UFH applications are numerous:
– Operating at much lower temperatures compared
to conventional radiator circuits, the UFH system
helps reduce energy consumption, resulting in lower
heating costs.
– Installation is simple and requires no clumsy tools.
– Even distribution of temperature is ensured as the
whole floor acts as a radiant heat source.
– The circuit is unobtrusive and discreet, which gives
more freedom to interior design, allowing for additional
spaces to be decorated accordingly.
– The system makes use of multi-zoning, which
means that each room benefits from individual time
and temperature control. That flexibility alone brings
significant value for money as no ‘paid-for’ energy goes
to waste.
– The compatibility of the JG Speedfit UFH model
with other renewable heating technologies such as
condensing boilers, solar power and heat pumps makes
it the sustainable heating solution of the future.
For more information visit www.speedfitUFH.co.uk
PUSH-FIT CASE STUDY
JG UFH IS IN THE HAUS
P07ISSUE 001 | OCTOBER 2013
THEPUSH-FIT PEOPLE
-
P09ISSUE 001 | OCTOBER 2013
P10ISSUE 001 | OCTOBER 2013
PUSH-FIT SPONSOR
RACE IT UPJG Speedfit has sponsored Newcastle based
rider, Joe Burns, in the Metzeler Superstock 1000
National Championship, competing in JG colours.
Joe has shown great speed throughout the season
achieving a number of podium positions. Well
done to Joe and we are confident that he can
continue to race ahead of the competition!
Name: Joe BurnsBorn: 15/04/1992Nickname: BurnsieHometown:
Newcastle upon TyneOccupation: Engine tuner & builderHobbies:
Fitness, Engines, Graphics, TravellingMotorcycle: 2013 Kawasaki
ZX10-R
2012: British 1000 Superstock Championship
Best result 2nd.
2011: British 1000 Superstock Championship
Best result 6th
2010: British 1000 Superstock
Wildcard at 3 rounds - Best result 9th
2009: British 600 Superstock Championship
Best result 1st
THEPUSH-FIT PEOPLE
Photography by Jon Jessop
-
ASK DAVE
P12ISSUE 001 | OCTOBER 2013
THEPUSH-FIT PEOPLE
PUSH-FIT EXPERT
Q) DO I NEED TO USE AN INSERT EVERY TIME I CONNECT YOUR SPEEDFIT
PIPE TO A FITTING AND WHY ARE THERE TWO TYPES OF INSERT?
A) Always use an insert when installing Speedfit pipe as it
gives the connection extra rigidity and support within the
insertion length. We have two types of insert - ‘Superseal
STS’ for plastic to plastic and our ‘Standard TSM’ inserts
that are mainly used for plastic pipe connections to
compression fittings. “Superseal STS” inserts have an
extra ‘O’-ring on the head of the insert and also one
on the body of the insert which goes inside the pipe -
to provide an even greater sealing protection. The ‘TSM
Standard’ insert has a shallow head that allows more of
the pipe length into the fitting. This means that when
joining with a compression fitting or another make of
push-fit connector there is sufficient pipe past the olive
or O-ring that ensures a strong connection.
Q) IS IT POSSIBLE TO CONNECT SPEEDFIT PIPE WITH OTHER MAKES OF
PUSH-FIT PLUMBING?
A) Yes. Any plastic push-fit plumbing range that
adheres to BS7291 is compatible with JG Speedfit. It
is recommended that you should use the same make
of pipe insert as the pipe you are installing - this
is because pipe internal diameters
may be different. For best
quality and highest reliability
of the connection we advise
using Speedfit pipes and
Speedfit fittings together.
Q) WHAT ARE THE MAXIMUM AND MINIMUM TEMPERATURES THAT SPEEDFIT
PIPE AND FITTINGS WILL WORK AT?
A) Fittings marked in the installation guide
as suitable for central heating are approved
to 12 Bar at 20°C, 6 Bar at 65°C and 3
Bar at 105°C, but can withstand up to 114°C
intermittently for ver y short periods if there is
a boiler or heater malfunction. The minimum
temperature is 0°C, provided the water
being carried does not freeze. If there is
any danger of the pipe freezing it must
be insulated to regulation standards.
Q) CAN I CONNECT SPEEDFIT PIPE AND FITTINGS DIRECTLY TO A
CENTRAL HEATING BOILER?
A) No, although most modern
boilers have a high
limit thermostat,
residual heat can be conducted from
the heat exchanger. Therefore, we
recommend a minimum of one metre
from the boiler casing should be run
in copper pipe, unless otherwise stated
in the boiler manufacturer’s installation
literature. This includes all connections to
the boiler.
Q) DO I NEED TO INSULATE SPEEDFIT PLUMBING?
A) The insulation requirements for Speedfit pipe and
fittings are the same as those for copper and should
comply with BS6700 and BS5422. If there is a danger
that pipes and fittings might freeze, that there may be
excessive heat loss or if the installation is outside of the
thermal envelope of the building it must be insulated.
Q) CAN I CONNECT A STEM ELBOW OR REDUCER DIRECTLY INTO A
COMPRESSION FITTING AND DOES IT NEED AN INSERT?
A) Yes it is possible to connect a stem elbow or
stem reducer into a compression fitting. You will
need to use a copper olive in the compression
fitting instead of a brass one as the compression
nut needs to be tightened more firmly. No need
to fit an insert into the stem fitting as stems
are manufactured compatible with push-fit and
compression fittings. To make a permanent water
tight connection push the stem hard into the tube stop
of the compression fitting, then tighten the compression
nut until the copper olive is gripping the stem tight enough
to prevent you from twisting it in the fitting and finally
tighten the compression nut once more with a full turn.
Remember - many but not all compression fittings
are suitable for use with plastic fittings and pipe.
Compression fittings with short tube stop depth or
brass olives should not be used with plastic fittings
or pipe.
DAVE, OF JG SPEEDFIT SUPPORT, ANSWERS SOME OF THE TOP PLUMBING
AND HEATING QUESTIONS HE HAS RECEIVED ON THE SPEEDFIT TECHNICAL
HELPLINE.
P11ISSUE 001 | OCTOBER 2013
If you have any queries regarding JG Speedfit products,
don’t hesitate in giving Dave and his team a call:
Speedfit Suppor t: 01895 425333
6
-
P13ISSUE 001 | OCTOBER 2013
THEPUSH-FIT PEOPLE
PUSH-FIT IN THE COMMUNITYPUSH-FIT SUPPORT
PUSH-FIT IN THE COMMUNITYINTRODUCTIONAs a family owned company
we endeavor to project our values of empowerment, integrity and
business ethics onto our involvement in the community. With a
strong sense of corporate and social responsibility, we attempt to
support numerous philanthropic and charity activities within our
reach and beyond.
Over the years John Guest has financially supported and
continues to aid initiatives and institutions such as the Thames
Hospicecare - taking care of people living with life-limiting
illnesses; the Harlington Hospice - providing holistic treatment
for patients with lethal diseases; the Com Café - a project
supporting vulnerable families within the local community by health
& wellbeing seminars and workshops; the Bell Farm Christian
Centre - providing meals and social activities for elderly people
in difficult situations.
With our extensive international reach we are happy to be
involved with social causes outside of the UK such as the
construction of a new hospital in Kalene, Zambia and the
development of a new water purification technology intended for
areas deprived of potable water.
HOSPITALIN ZAMBIA
WATERFOR ALL
Our goal is to reach out and
touch people’s lives despite any
borders and with that in mind we
are happy to announce the recent
opening of a new operating
theatre block at the mission
hospital in Kalene, Zambia.
The new addition to the hospital
was built with donations by John
Guest and other third parties, as
the Zambian Government has no
financial commitment to the project.
Thanks to the extended capacity of
the new facility more patients could
receive life saving treatment quicker.
Also the new hospital addition
allows for major operation and
caesarean section procedures to
be performed at the same time in a
highly sterile and safe environment.
For more information on the
Kalene Mission Hospital, please visit
www.kalenehospital.com
UFH VIDEO TUTORIALS
Designed to offer potable water
to people in disadvantaged third
world areas, the new ‘village pump’
is a manually operated filtration
technology with the capacity to
produce up to 500 litres of crystal
clear water per hour.
Developed by our John Guest
Engineering department and Dutch
inventor Rob van Osdorp, the
new water purification concept
transforms contaminated water,
filtering out viruses and bacteria,
which could help prevent the
spread of cholera, hepatitis and
other endemic diseases in high-risk
areas such as Africa.
The final pump has now
been launched and aimed
at environmentally engaged
companies to donate to deprived
villages around the world with no
access to drinkable water. Scan for video tuorials.
SPEEDFIT SUPPORT
Not everyone is an expert in Underfloor Heating
and for that reason we introduced a set of UFH
video tutorials to help plumbing professionals better
understand the technical and installation details behind
the UFH system.
The videos are easy to follow self-explanatory
guides that can give confidence to even a first time
Underfloor Heating installer. Each video features a
professional demonstrating how the JG system is put
together in a step-by-step manner. Along with a best
practice explanation of each JG pipe fixing system, a full
breakdown is also provided on how best to prepare the
floor, how to connect the manifold with the pipework
as well as tips on how to test the system once installed.
These videos will fully complement our Speedfit
Support campaign, which aims to inform our
contractors of the complete Underfloor Heating
technical support package offered by the company. The
videos are available on our website -
www.speedfitUFH.co.uk and YouTube.
Free Design Service
Onsite Installation Advice
Online Project Estimator
Technical Helpline
Online Info
UFHwww.speedfitUFH.co.uk
TECHNICAL ADVICE WHEN YOU NEED IT!
P14ISSUE 001 | OCTOBER 2013
-
PUSH-FIT LATESTTHE PUSH-FIT DIARY
P16P15ISSUE 001 | OCTOBER 2013 ISSUE 001 | OCTOBER 2013
PUSH-FIT LATESTTHEPUSH-FIT PEOPLE
PUSH-FIT DIARY
THEDOUBLE CHECK SERVICE VALVE
32MM - 28MM UNDERGROUND REDUCER
INNOVATION IS AT THE CORE OF OUR PHILOSOPHY. WE LISTEN TO OUR
CUSTOMERS AND TRY TO DEVELOP NEW TECHNOLOGIES THAT ALLOW FOR
QUICKER, EASIER AND MORE RELIABLE PLUMBING AND HEATING
INSTALLATIONS. HERE ARE SOME OF THE NEW ADDITIONS TO OUR EVER
EXPANDING PRODUCT RANGE.
WE AIM TO SHOWCASE OUR NEW PLUMBING AND HEATING APPLICATIONS AT
MORE THAN THIRTY NATIONAL AND GLOBAL EXHIBITIONS THROUGHOUT THE
YEAR. HERE ARE THE SHOWS YOU CAN FIND US AT FOR THE REST OF
2013.
We are delighted to announce the launch of our
new 15mm Double Check Valve with built-in isolator
making it two products in one! Designed and
manufactured in the UK, the new JG Double Check
Service Valve incorporates Speedfit technology
ensuring fast, durable and safe plumbing installations.
Product Usage Examples:
• Outside Taps
• Back feed prevention
• Shower mixers
• Water softeners and filters
The new JG 32mm - 28mm Underground Reducer
Connector has been designed to connect MDPE
pipes, used above and below ground, that
convey potable water from distribution
mains to individual properties.
Product Features
• For cold water use only
• No tools required
• Simple Push-fit action
• Durability - high resistance to impact
• Reliability - trouble free connection
• Stainless steel teeth providing extra grip
MON TUE WED THU FRI SAT SUN30 1 2 3 4 5 6
7 8 9 10 11 12 13
14 15 16 17 18 19 20
21 22 23 24 25 26 27
28 29 30 31 1 NOV 2 3
MON TUE WED THU FRI SAT SUN28 29 30 31 1 2 3
4 5 6 7 8 9 10
11 12 13 14 15 16 17
18 19 20 21 22 23 24
25 26 27 28 29 30 1 DEC
OCTOBER
NOVEMBER
PHEX STAND 4OLD TRAFFORD, MANCHESTER
PHEX STAND 28STAMFORD BRIDGECHELSEA
HB&R STAND 454 HARROGATE
HB&R STAND 115 SOMERSET
For more information on these and
to find out about any local events
in your region please contact your
Area Sales Manager.
-
THE PUSH-FIT CONTACTSBEHIND THE SCENES
P17ISSUE 001 | OCTOBER 2013
THEPUSH-FIT PEOPLE
P18ISSUE 001 | OCTOBER 2013
PUSH-FIT CONTACTSPUSH-FIT BEHIND THE SCENES
BEHIND THE SCENES OF A BRITISH MANUFACTURER
With significant focus on product excellence, we take
pride in the high manufacturing standards we have
established after many decades of refinement. The
entire journey of our products from the initial concept,
through to tool design, manufacture and testing has
been fully undertaken by John Guest and carried
out entirely in the UK. Each fitting that comes off the
production line has undergone numerous quality tests
throughout the whole production cycle.
Since this is the first issue of The Push-fit People it
is important to provide some insight into what the
manufacturing of our world-class products entails.
Tony Adams, one of John Guest Head Office’s Moulding
Managers at the West Drayton site, takes us through
the initial stages of producing the iconic push-fit fitting:
“As we have adopted a very strategic approach of
undertaking every step of the supply chain ourselves,
we can exercise total control over our planning and
testing production stages. That allows us to establish an
extremely low defect ratio, which means that only a
very tiny fraction of the millions of fittings manufactured
do not pass our quality tests before we send out to
the marketplace. For the purpose of reducing the
reoccurrence of faults, procedures are instigated to
control non-conforming products with an emphasis on
identifying what caused the problem and implementing
a corrective action.”
From the very start, John Guest keeps the entire
engineering process under its own umbrella. All fittings
are designed by JG engineers, all tools are made by JG
toolmakers, and all plastic products are moulded by JG
moulding machines. When you see the JG logo on a
fitting, you can be sure that it is a genuine JG connector.
At John Guest we apply various measuring techniques
for the purpose of checking the dimensional stability
and surface finish standards of our products along
with visual checks to identify aesthetic moulding faults.
That allows us to be extra confident in the high quality
standards we have established and continue to offer
manufacturing excellence.”
TO KEEP A PERSONAL CONTACT WITH OUR CUSTOMERS NO MATTER WHERE
THEY ARE, WE HAVE ESTABLISHED A WELL-DRILLED SALES TEAM COVERING
ALL OF THE UK. FOR YOUR CONVENIENCE OUR JG SPEEDFIT AREA SALES
MANAGERS ARE GROUPED UNDER THE REGIONS THEY COVER IN THE CONTACT
CARDS OPPOSITE.
EASTERN
NORTHWEST
SOUTH WEST& MIDLANDS
SOUTH EAST
NORTH EAST& SCOTLAND
PLEASE TEAR OFF AND KEEP
NORTH EAST& SCOTLAND
Mike Garnet 07889 625136Simon Noble 07889 642295Tony O’Neil
07740 023464
EASTERN
Jamie Mahoney 07715 768099 ASMKevin Ayres 07841 673358 ASMPaul
Brown 07740 819519 ASMStuart Lee 07841 737964 ASMTony Clelland
07764 883261 ASMTerry Hill 07764 774459 TSEToby Howard-Willis 07793
267207 TSE
PLEASE TEAR OFF AND KEEP
NORTHWEST
NORTHERNIRELAND
Andy Lea 07740 695019 ASMChris Smith 07764 774478 ASMDanny Hill
07764 568267 ASMPaul Maystone 07720 497612 ASMPeter Skinley 07730
052056 TSE
Mark Mills 07753 832211 ASMMaurice Moates 07764 774479 TSE
NORTH EAST& SCOTLAND
Mike Garnet 07889 625136 ASMSimon Noble 07889 642295 ASMTony
O’Neil 07740 023464 ASM/TSEPaul McGrath 07803 151040 TSE
SOUTH WEST& MIDLANDS
Andy George 07740 734796 ASMCraig Newton 07912 539907 ASMMark
Oliver 07793 309691 ASMTom Fitzcharles 07921 409784 ASMGareth
Gwillim 07740 695050 TSE
SOUTH EASTAlan Holloway 07912 540240 ASMChris Price 07711 426190
ASMGordon McGill 07841 673453 ASMJames Steadman-Young 07739 656825
ASMPeter Kent 07894 608222 ASMAndy Pilgrim 07739 821508 TSE
Please find below contact details for our Area Sales Managers
(ASM) and Technical Sales Engineers (TSE) for your records.
THEPUSH-FIT PEOPLE
THEPUSH-FIT PEOPLE
THEPUSH-FIT PEOPLE
THEPUSH-FIT PEOPLE
THEPUSH-FIT PEOPLE
