Upload
nancyspahr
View
12
Download
0
Tags:
Embed Size (px)
Citation preview
Science Engineering Project
By: Jeffery Middlemas
Problem and Solution
• My problem is that if you drop something like screws, paperclips, etc., you need an easier way of picking up those objects with ease.
• The solution that I came up with was to make a long, skinny object that has multiple magnets on the end of it to pick up the objects if they fall on the floor or get behing something like a fridge, dresser, or some other heavy object.🎼
Why I Chose this Project
• I chose this project because I am always dropping things behind heavy things and having to move it around so I can get the things that I dropped.
What I Enjoyed Most about Doing My Project
• I enjoyed making the device and testing it because l liked seeing what my device would do and if it worked.
Explanation of Procedures
• Put the device just above the small objects
• If they don't pick up, lightly touch the device with the objects and, most likely, they will pick up
• When attached, bring the end of the device close to you and pick the objects off of the end
Problems Encountered
• A problem that I encountered was if the object that I dropped was a metal that wasn't attracted to magnets. Another problem was the glue not sticking, but I found a solution by adding hot glue.
Results
What I Learned From this Activity
• I learned how strong a magnet really is, how long businesses have to make up ideas, and how useful my device is.
Things that I would do Differently
• What I would do differently next time would be to have larger magnet strength to pick up the objects farther away.
Most Difficult Part of My Project
• The most difficult part of my project was getting the right sized supplies to fit the device well.
Acknowledgements
• My dad• My mom