JIB ARMS - J.L. Fisher - Motion Picture and Television … Picture & Television Equipment JIB ARMS The Model 20, 21 and 22 Jib Arms can be used on all J.L. Fisher Camera Dollies. The

Motion Picture &Television Equipment

JIB ARMS

The Model 20, 21 and 22 Jib Arms can be used on all J.L. Fisher

Camera Dollies. The Model 23 can be used on the Model 9 and

10 Camera Dollies with a Center Mount. They are smooth, quiet

and easy to set up, with the J.L. Fisher reputation for being well

constructed and easily maintained. All Jib Arms come complete

with Weight Carts, Leveling Offsets and Angle Plates.

Engineered and handcrafted to be the

most reliable Jib Arms available, they

have the lowest maintenance of any Jib

Arm. Grips and rental houses appreciate

their outstanding dependability and

ease of use... just ask them.

J.L. FISHER® is a registered trademark of J.L. Fisher, Inc. 1.13.2017

Note *

When using any J.L. Fisher Jib Arm on dolly

track, be sure to mount the dolly on the

track before assembling the Jib Arm.

BUILD IT OUT TO THE LENGTH YOU NEED

The Model 23 is for use only with Model 9 & 10 Dollies with Center Mount and 18 in RJ18 Heavy Duty Riser. Not for use with Model 11 Dolly.

Two experienced grips can assemble this Jib to its full length in 10 minutes

Model 23 Sectional Jib Specifications

* Note:

Minus measurement indicates the front is Below Ground Level

Maximum height: 11 ft 2 in (3.4 m)Minimum height: –1 in (–2.54 cm) *Unloaded weight: 207 lbs (94 kg)

VERSION 2Maximum payload:

200 lbs (91 kg)

9 ft (2.7 m)4 ft (1.2 m)

Maximum height: 13 ft 6 in (4.1 m)Minimum height: –2 ft 4 in (–71 cm) *Unloaded weight: 271 lbs (123 kg)


200 lbs (91 kg)

12 ft (3.7 m)7 ft (2.1 m)

Maximum height: 20 ft 7 in (6.3 m)Minimum height: –9 ft 4 in (–2.8 m) *Unloaded weight: 340 lbs (154 kg)


131 lbs (59 kg)

21 ft (6.4 m)7 ft (2.1 m)

Maximum height: 18 ft 3 in (5.6 m)Minimum height: –7 ft (–2.1 m) *Unloaded weight: 319 lbs (145 kg)


187 lbs (85 kg)

18 ft (5.5 m)7 ft (2.1 m)

Maximum height: 8 ft 9 in (2.7 m)Minimum height: 2 ft 3 in (69 cm)Unloaded weight: 186 lbs (85 kg)


200 lbs (91 kg)

6 ft (1.8 m)4 ft (1.2 m)

1 ft 8.4 in (52 cm)

9 ft (2.7 m)7 ft (2.1 m)

Maximum height: 11 ft 2 in (3.4 m)Minimum height: –1 in (–2.54 cm) *Unloaded weight: 237 lbs (108 kg)


200 lbs (91 kg)

9 ft (2.7 m)7 ft (2.1 m)

1 ft 10 in (56 cm)

Maximum height: 15 ft 10 in (4.8 m)Minimum height: – 4 ft 8 in (–1.4 m) *Unloaded weight: 297 lbs (135 kg)


200 lbs (91 kg)

15 ft (4.6 m)7 ft (2.1 m)

2 ft 1 in (63.5 cm)

Max.

18"

The Model 23 Jib is a stable yet lightweight sectional arm used for Features, Television,

Commercials, Music Videos and Live Productions. The Jib sections are ergonomic, easy

to handle and assemble quickly.

Model 23 Sectional Jib Reach: from 6 feet to 21 feet (1.8 m to 6.4 m)

Color-coded, pre-tensioned cables secure the

assembled sections into an extremely rigid Jib.

The Model 23 Jib rotates 360 degrees and enables

the operator to position the camera at various

elevations from –9 ft 4 in to 20 ft 7 in high.

All cables are color coded Cables in separate color coded bags

Locking pins secure all lower links The Model 23 is built in 3 foot sections

Installing the 4-way Leveling Offset

Tensioning the cables

7 SIZES ALL IN ONE BOX

CAN BE BUILT TO 7 DIFFERENT LENGTHS

The Model 23 is for use only with Model 9 & 10 Dollies with Center Mount and 18 in RJ18 heavy duty Riser. Not for use with Model 11 Dolly.

Max.18"

MAIN FEATURES

21 FEET... IN 10 MINUTES

Utility Cart Full, with Main Jib Section79 in L x 28 in W x 72 in H(201.7 cm L x 71.1 cm W x 182.9 cm H)

Weight Carts23 in L x 17 in W x 43 in H(58.4 cm L x 42.2 cm W x 109.2 cm H)

WCA215 lbs(97.5 kg)

WCC242 lbs(109.8 kg)

WCC242 lbs(109.8 kg)

WCB267 lbs(121.1 kg)

Utility Cart

DIMENSIONS & WEIGHTS (for local pickup)

Utility Cart rear viewshowing section storage

581 lbs (263.5 kg)

! Jib store conveniently in compartments in a self-contained Utility Cart.! Four weight carts are provided for easy transportation of weights and other accessories.! The Jib can be configured in 3 foot increments from 6 ft (1.83 m) to 21 ft (6.4 m).! Support cables are pre-adjusted to the proper length and color coded for easy assembly.! Assembly instructions for all lengths and safety guidelines included.! All required parts for all 7 lengths are included in the Utility Cart.

sections, cables and parts

UTILITY CART, WEIGHTS AND WEIGHT CARTS (Ready for local pickup)

Center Mount (CM) and RJ12 Riser shown on Model 10 Dolly

USING THE CENTER MOUNT

The Center Mount (CM) mounts easily on the Model 9, 10 and 11 Dollies. It has a four-way leveling adjustment with a leveling indicator. The Center Mount has a standard Mitchell mount and comes with a Heavy Duty 12-inch Riser (RJ12) for use with our Model 20, 21 and 22 Jib Arms. The Center Mount for the Model 23 Sectional Jib Arm (CM3), for use on the Model 9 and 10 Dollies only, comes with an 18 inch Heavy Duty Riser (RJ18).

The maximum gross load capacity of the Center Mount when used on the Model 9 and 10 Dollies is 1200 pounds (544 kg). Due to the Model 11 Dolly's maximum load capacity of 900 pounds (408 kg) the Center Mount's maximum load capacity, when used on a Model 11 Dolly is 900 Pounds (408 kg).

Note: When using the Center Mount on the Model 11, this 900 pound (408 kg) limit must not be exceeded. Also, the Center Mount is not for supporting personnel or personnel carrying cranes.

Do not use Risers greater than 18 in on the Center

Mount (CM).Max 18 in

Total Weight: Utility Cart & 4 Weight Carts 1547 lbs (701.7 kg)

DIMENSIONS

Model 23 Sectional Jib

Center Line

FLOOR LEVEL FLOOR LEVEL

13 ft 6 in(4.1 m)

11 ft 2 in(3.4 m)

8 ft 9 in(2.7 m)

15 ft 10 in(4.8 m)

18 ft 3 in(5.6 m)

20 ft 7 in(6.3 m)

21 ft 1 in(6.4 m)

8 ft(2.4 m)

6 ft 3 in(1.9 m)

4 ft 4 in(1.3 m)

9 ft 11 in(3 m)

11 ft 9 in(3.6 m)

13 ft 7 in(4.1 m)

6 ft(1.8 m)

9 ft(2.7 m)

12 ft(3.7 m)

15 ft(4.6 m)

18 ft(5.5 m)

21 ft(6.4 m)

21 ft 4 in(6.5 m)

5 ft 6 in(1.7 m)

4 ft 5 in(1.4 m)

2 ft 3 in(69 cm)

6 ft 4 in(1.9 m)

8 ft 3 in(2.5 m)

10 ft 1 in(3.1 m)

13 ft 11 in(4.2 m)

12 ft(3.7 m)

2 ft 4 in(71 cm)

4 ft 8 in(1.4 m)

7 ft(2.1m)

9 ft 4 in(2.8 m)

9 ft 9 in(3 m)

1 in(2.54 cm)

13 ft 11 in(4.2 m)

7 ft 2 in(2.2 m)

To Ground Level

4 ft 11 in(1.5 m)

10 ft 6 in(3.2 m)

8 ft 5 in(2.6 m)

7 ft 1 in(2.2 m)

2 ft 9 in(84 cm)

4 ft 1 in(1.2 m)

5 ft 9 in(1.8 m)

1 ft 5 in(43 cm)

18 in(46 cm)

6 ft(1.8 m)

2 ft 1 in(63.5 cm)

11.5 in(29.2 cm)

12 in(30 cm)

9 in(23 cm)

NOSE PIECE

NOT TO SCALE

12 in (30 cm)

LOF Leveling Offset

2 BABY PIN RECEIVERS5/8 in dia. (15.8 mm)

8.5 in (22 cm)5 in (13 cm)

4.875 in(12 cm)

SET SCREWMITCHELL MOUNT

19.5 in(50 cm)

8 in(20 cm)

10.25 in (26 cm)

7 in (18 cm)

6.5 in(17 cm)

3.75 in(10 cm)

3.5 in(9 cm)

MITCHELL MOUNT

SET SCREW

NOT TO SCALE

APJ Angle Plate

9.25 in(23 cm)

2 BABY PIN RECEIVERS5/8 in dia. (15.8 mm)

SIDE VIEW

FRONT VIEW

1 ft 2 in(36 cm)

1 ft 2 in(36 cm)

12º

12º

12º12º

NOT TO SCALE

WEIGHT BUCKETNOT TO SCALE

21 in(53 cm)

17 in(43 cm)

12 ft(3.7 m)

CEILING HEIGHT

Model 20

Model 21

Model 22

SPECIFICATIONS

Max payload (with std. weights) . . . 124 lbs (56 kg)

Max payload (with XRW weights) . 175 lbs (80 kg)

Unloaded weight . . . . . . . . . . . . . . 161 lbs (73 kg)

Compatible with . . . . . . . . . . . . . . . 9, 10 & 11 Dollies

Max height on 10 Dolly beam . . . . . . . . Do Not Use on Dolly beam

Min height on 10 Dolly beam. . . . . . . . . Do Not Use on Dolly beam

Max height on Center Mount . . . . . . . . . 11 ft 5 in (3.5 m)

Min height on Center Mount . . . . . . . . . –1 ft 6 in (–46 cm) (below ground level)





Max height on 10 Dolly beam . . . . . . . . 8 ft 6 in (2.6 m)

Min height on 10 Dolly beam. . . . . . . . . –3 in (–7.6 cm) (below ground level)

Max height on 10 Dolly Center Mount . . 8 ft 3 in (2.5 m)

Min height on 10 Dolly Center Mount . . 1 ft 7 in (48 cm)





Max height on 10 Dolly beam . . . . . . . . 9 ft 6 in (2.9 m)

Min height on 10 Dolly beam. . . . . . . . . –1 ft (–30.5 cm) (below ground level)

Max height on 10 Dolly Center Mount . . 9 ft 4 in (2.8 m)

Min height on 10 Dolly Center Mount . . 6 in (15 cm)

Model 20 on 9 or 10 Dollies with payload over 100 lbs requires Center Mount Using 11 Dolly always requires Center Mount

Model 21 on 9 or 10 Dollies with payload over 100 lbs requires Center Mount Using 11 Dolly always requires Center Mount

Model 22 on ALL Dollies requires Center Mount

Model 20, 21 and 22 Jib Arms share these features:

! Quick Setup ! Mitchell mounts! Weight Carts included! Weight box can be inverted

! Weatherproof ! Ultra Smooth Pan & Tilt ! Front end is submersible ! Adjustable counterbalance weight

Examples of AlternateMounting Positions

! Adjustable Drag Pan & Tilt! 4 Position Angle Plate! 12 in Leveling Offset! Balance Ratio 2:1

Maximum Payloads are calculated from the center line of the Mitchell mount on the Leveling Offset (LOF)

2 ft 5 in (74 cm) 3 ft 5.5 in (1.1 m)

Reach: 4 ft 5.5 in (1.4 m)

4.9 in (12 cm)

9.5 in (24 cm)

TYPICAL FORMODEL 20, 21 & 22

BOTHPINS MUST BE

IN PLACE

3 ft (91 cm) 4 ft 10.5 in (1.5 m)

Reach: 5 ft 10.5 in (1.8 m)

BOTHPINS MUST BE

IN PLACE

4 ft 5 in (1.4 m) 7 ft 5.5 in (2.3 m)

Reach: 8 ft 5.5 in (2.6 m)

BOTHPINS MUST BE

IN PLACE

12.5 in(32 cm)

50.75 in(129 cm)To Floor


12.125 in(31 cm)

23.25 in(59 cm)

8° Adjustment

CENTER MOUNT ON 9 DOLLY

12.5 in(32 cm)



12.75 in(32 cm)

8° Adjustment


Max. 18" Riser on Center Mount

12.5 in(32 cm)



17.75 in(45 cm)

28.75 in(73 cm)

8° Adjustment

18.5 in(47 cm)

18 in Heavy Duty Riser (RJ18) must be used with the

Model 23 Jib Arm.

Do not use Risers greater than 18 in

on the Center Mount.

Do not use the Model 23 Jib Arm on the Model 11

Dolly

RJ18Riser

Use the Model 23 Jib Arm on the Model 9 & 10 Dollies only

A

B

C

D

E

F

G

H

I

Model 20 Model 21 Model 22

11.5 in (29 cm) 11.5 in (29 cm) 11.5 in (29 cm)

3 ft 6.5 in (1.1 m) 4 ft 4 in (1.3 m) 5 ft 11.5 in (1.8 m)

11 in (28 cm) 1 ft 4.75 in (43 cm) 2 ft 6 in (76 cm)

5 ft 2.25 in (1.6 m) 5 ft 2.25 in (1.6 m) 5 ft 2.25 in (1.6 m)

4 ft 2.75 in (1.3 m) 4 ft 2.75 in (1.3 m) 4 ft 2.75 in (1.3 m)

7 ft 6 in (2.3 m) 8 ft 6 in (2.6 m) 10 ft 7.9 in (3.3 m)

3 ft 3.4 in (1 m) 4 ft 3.9 in (1.3 m) 6 ft 5 in (2 m)

2 ft 3.9 in (71 cm) 3 ft 4.4 in (1 m) 5 ft 5.6 in (1.7 m)

4.875 in (12 cm) 4.875 in (12 cm) 4.875 in (12 cm)

A

B

C

E

G

H

I

F

D

All dimensions are taken on a J.L. Fisher Model 10 Dolly with a Center Mount (CM) and a 12 in Riser (RJ12)

Model 20, 21 and 22 Jib Arms

Weight box may be inverted allowing Jib to be hung upside down

Baby Pin Receivers 5/8 in dia. (15.8 mm)

Adjustable counterbalance weight

Adjustable drag pan & tilt

FLOOR LEVEL

2 2 2

DIMENSIONS

RJ12RJ12

RJ12


! Leveling 12 in Offset! Angle Plate! Detachable counterweight box! 27 large poly coated weights, 11.5 lbs each! 4 small poly coated weights, 3 lbs each! Plate washer & bolt, hand screw and allen wrench! Riser Nut! Weight Carts! Transport Case

Model 20, 21 & 22 Standard Accessories

Model 21 Jib Arm shown on Model 9 Dolly

Weight and Accessory Carts

Transport Case(Not included for local rental)

Model 22 Jib Arm shown on Model 10 Dolly with Center Mount.

Leveling Offset (LOF) in the upright position

12 in(30.5 cm)

!

! Additional weights & bar assembly (XRW)! Mitchell Euro Adapter (MEA)! 1/8Mitchell Lamp Adapter, Junior 1 in (MLA)! Weaver Steadman Fluid Heads! J.L. Fisher Crossarms

12, 18, 24 or 36 in Riser or Dropdown

Model 20, 21 & 22 OPTIONAL ACCESSORIES

Riser or Dropdownfrom 12 in to 36 in

ADD A CROSSARM FOR MULTI-AXIS MOVES

Model 20 Jib Arm with CRA4 Crossarm shown

on Model 11 Dolly

An optional Weight Bar and weights to counterbalance the Jib. The Weight Bar installs easily and has quick release keepers to hold the weights in place.

Weaver Steadman Fluid Heads are available in 2 and 3 axis versions with

extension tubes up to 36 in

Weight Bar and weights add 100 lbs. of counterbalance

(XRW)

Mitchell EuroAdapter (MEA)

Additional Risers are for use on end of Jib Arms only. Do not use these Risers on the Center Mount (CM).

Mitchell LampAdapter (MLA)

1/8Junior 1 in

5K lamp on MLA1/81 in lamp adapter

Not for use on the Model 23 Jib Arm

Contents © J.L. Fisher, Inc. Printed in U.S.A. 1.13.2017

J.L. Fisher, Inc. Motion Picture & Television Equipment

1000 W. Isabel Street, Burbank, CA 91506 U.S.A.

Tel: (818) 846-8366 / Fax: (818) 846-8699

Web: www.jlfisher.com e-mail: [email protected]

J.L. Fisher, GmbH Emil-Hoffmann-Str. 55-59 50996 Köln, Germany

Tel: +49 2236 3922 0 Fax: +49 2236 3922 12

Web: www.jlfisher.de e-mail: [email protected]

J.L. FISHER PRODUCTS ARE PROUDLY MADE IN BURBANK, CALIFORNIA U.S.A.

Max. 18"

Max. 18"

Documents

JIB ARMS - J.L. Fisher - Motion Picture and Television … Picture & Television Equipment JIB ARMS The Model 20, 21 and 22 Jib Arms can be used on all J.L. Fisher Camera Dollies. The