2
Technical Hotline: 01592 777570 10 Introduction Timber To Masonry Connections Timber Frame Engineered Wood Products (EWP) Solid Timber/Roof Truss Truss To Wallplate Connections Multiple Connections Restraint Straps Ancillary Products Custom Connector Design Template JH/JHI - Masonry Joist Hangers PRODUCT DESCRIPTION The JH/JHI is the traditional timber - masonry hanger range. The higher side flanges help resist rotation while the wider masonry top flange spreads the loading over a greater surface area. ADVANTAGES Higher side flanges help resist rotation while the wider masonry top flange spreads the loading over a greater surface area. MATERIAL 1.5mm (39 to 100mm wide) - galvanised mild steel - Z600 2.5mm (105 to 198mm wide) - galvanised mild steel - Z600 JH/JHI JHR/JHIR JH / JHR for Trusses & Solid Timber joists JHI / JHIR for Open Web JHI / JHIR for I-Joists JHI Performance - I-Joist Product Code Dimensions Fixings (3.75 x 30mm) Safe Working Loads (kN) Characteristic Capacity of Hanger (kN) Uplift Short Term Masonry Crushing Strength Uplift Masonry Crushing Strength W H B Joist 2.8 N/mm 2 3.5 N/mm 2 7.0 N/mm 2 2.8 N/mm 2 3.5 N/mm 2 7.0 N/mm 2 All widths All widths 39 to 100mm wide 105 to 198mm wide All widths All widths 39 to 100mm wide 105 to 198mm wide JHI-46-195 46 195 64 2 1.0 6.0 7.54 9.1 7.54 2.0 10.94 13.68 15.99 13.68 JHI-46-225 46 225 64 2 1.0 6.0 7.54 9.1 7.54 2.0 10.94 13.68 15.99 13.68 JHI-46-240 46 240 64 2 1.0 6.0 7.54 9.1 7.54 2.0 10.94 13.68 15.99 13.68 JHI-46-300 46 300 64 2 1.0 6.0 7.54 9.1 7.54 2.0 10.94 13.68 15.99 13.68 JHI-46-350 46 350 64 2 1.0 6.0 7.54 9.1 7.54 2.0 10.94 13.68 15.99 13.68 JHI-46-400 46 400 64 2 1.0 6.0 7.54 9.1 7.54 2.0 10.94 13.68 15.99 13.68 JHI-46-450 46 450 64 2 1.0 6.0 7.54 9.1 7.54 2.0 10.94 13.68 15.99 13.68 Hangers shown above are for 45mm joists, JHIs are available in widths of 39, 46, 50, 52, 61, 65, 72, 75, 78, 92, 97, 100, 105, 122, 130, 138, 150, 183 and 198mm. Standard return sizes available 100, 115, 125, 140 & 215mm. JHI Performance - Open Web Joist Product Code Dimensions Fixings (3.75 x 30mm) Safe Working Loads (kN) Characteristic Capacity of Hanger (kN) Uplift Short Term Masonry Crushing Strength Uplift Masonry Crushing Strength W H B Joist 2.8 N/mm 2 3.5 N/mm 2 7.0 N/mm 2 2.8 N/mm 2 3.5 N/mm 2 7.0 N/mm 2 All widths All widths 39 to 100mm wide 125 to 198mm wide All widths All widths 39 to 100mm wide 125 to 198mm wide JHI-50-195 50 195 64 2 1.0 6.0 7.54 9.1 7.54 2.0 10.94 13.68 15.99 13.68 JHI-50-225 50 225 64 2 1.0 6.0 7.54 9.1 7.54 2.0 10.94 13.68 15.99 13.68 JHI-50-240 50 240 64 2 1.0 6.0 7.54 9.1 7.54 2.0 10.94 13.68 15.99 13.68 JHI-50-250 50 250 64 2 1.0 6.0 7.54 9.1 7.54 2.0 10.94 13.68 15.99 13.68 JHI-50-300 50 300 64 2 1.0 6.0 7.54 9.1 7.54 2.0 10.94 13.68 15.99 13.68 JHI-50-350 50 350 64 2 1.0 6.0 7.54 9.1 7.54 2.0 10.94 13.68 15.99 13.68 JHI-50-400 50 400 64 2 1.0 6.0 7.54 9.1 7.54 2.0 10.94 13.68 15.99 13.68 JHI-50-450 50 450 64 2 1.0 6.0 7.54 9.1 7.54 2.0 10.94 13.68 15.99 13.68 Hangers shown above are for 47mm joists, JHIs are available in widths of 39, 46, 50, 75, 100, 125, 150 and 198mm. Standard return sizes available 100, 115, 125, 140 & 215mm. CE marked - Tested in accordance with EN846-8 Makes a major contribution to compliance with air leakage H W B 75 H W B R

JH/JHI - Masonry Joist Hangers...JH/JHI - Masonry Joist Hangers PRODUCT DESCRIPTION The JH/JHI is the traditional timber - masonry hanger range. The higher side flanges help resist

  • Upload
    others

  • View
    6

  • Download
    0

Embed Size (px)

Citation preview

Page 1: JH/JHI - Masonry Joist Hangers...JH/JHI - Masonry Joist Hangers PRODUCT DESCRIPTION The JH/JHI is the traditional timber - masonry hanger range. The higher side flanges help resist

Technical Hotline: 01592 77757010

Intro

duct

ion

Tim

ber T

o M

ason

ryC

onne

ctio

nsTi

mbe

r Fra

me

Eng

inee

red

Woo

dP

rodu

cts

(EW

P)

Sol

id T

imbe

r/Roo

f Tru

ssTr

uss

To W

allp

late

Con

nect

ions

Mul

tiple

C

onne

ctio

nsR

estra

int S

traps

Anc

illar

y P

rodu

cts

Cus

tom

Con

nect

orD

esig

n Te

mpl

ate

JH/JHI - Masonry Joist Hangers

PRODUCT DESCRIPTION

The JH/JHI is the traditional timber - masonry hanger range. The higher side flanges help resist rotation while the wider masonry top flange spreads the loading over a greater surface area.

ADVANTAGES

Higher side flanges help resist rotation while the wider masonry top flange spreads the loading over a greater surface area.

MATERIAL

1.5mm (39 to 100mm wide) - galvanised mild steel - Z6002.5mm (105 to 198mm wide) - galvanised mild steel - Z600

••

JH/JHI JHR/JHIR

JH / JHR for Trusses & Solid Timber joists JHI / JHIR for Open Web JHI / JHIR for I-Joists

JHI Performance - I-Joist

Product Code

DimensionsFixings(3.75 x 30mm)

Safe Working Loads (kN) Characteristic Capacity of Hanger (kN)

UpliftShortTerm

Masonry Crushing Strength

Uplift

Masonry Crushing Strength

W H B Joist2.8 N/mm2 3.5 N/mm2 7.0 N/mm2 2.8 N/mm2 3.5 N/mm2 7.0 N/mm2

All widths All widths 39 to100mm wide

105 to 198mm wide All widths All widths 39 to

100mm wide105 to

198mm wideJHI-46-195 46 195 64 2 1.0 6.0 7.54 9.1 7.54 2.0 10.94 13.68 15.99 13.68

JHI-46-225 46 225 64 2 1.0 6.0 7.54 9.1 7.54 2.0 10.94 13.68 15.99 13.68

JHI-46-240 46 240 64 2 1.0 6.0 7.54 9.1 7.54 2.0 10.94 13.68 15.99 13.68

JHI-46-300 46 300 64 2 1.0 6.0 7.54 9.1 7.54 2.0 10.94 13.68 15.99 13.68

JHI-46-350 46 350 64 2 1.0 6.0 7.54 9.1 7.54 2.0 10.94 13.68 15.99 13.68

JHI-46-400 46 400 64 2 1.0 6.0 7.54 9.1 7.54 2.0 10.94 13.68 15.99 13.68

JHI-46-450 46 450 64 2 1.0 6.0 7.54 9.1 7.54 2.0 10.94 13.68 15.99 13.68

Hangers shown above are for 45mm joists, JHIs are available in widths of 39, 46, 50, 52, 61, 65, 72, 75, 78, 92, 97, 100, 105, 122, 130, 138, 150, 183 and 198mm.Standard return sizes available 100, 115, 125, 140 & 215mm.

JHI Performance - Open Web Joist

Product Code

DimensionsFixings(3.75 x 30mm)

Safe Working Loads (kN) Characteristic Capacity of Hanger (kN)

UpliftShortTerm

Masonry Crushing Strength

Uplift

Masonry Crushing Strength

W H B Joist2.8 N/mm2 3.5 N/mm2 7.0 N/mm2 2.8 N/mm2 3.5 N/mm2 7.0 N/mm2

All widths All widths 39 to 100mm wide

125 to 198mm wide All widths All widths 39 to

100mm wide125 to

198mm wideJHI-50-195 50 195 64 2 1.0 6.0 7.54 9.1 7.54 2.0 10.94 13.68 15.99 13.68

JHI-50-225 50 225 64 2 1.0 6.0 7.54 9.1 7.54 2.0 10.94 13.68 15.99 13.68

JHI-50-240 50 240 64 2 1.0 6.0 7.54 9.1 7.54 2.0 10.94 13.68 15.99 13.68

JHI-50-250 50 250 64 2 1.0 6.0 7.54 9.1 7.54 2.0 10.94 13.68 15.99 13.68

JHI-50-300 50 300 64 2 1.0 6.0 7.54 9.1 7.54 2.0 10.94 13.68 15.99 13.68

JHI-50-350 50 350 64 2 1.0 6.0 7.54 9.1 7.54 2.0 10.94 13.68 15.99 13.68

JHI-50-400 50 400 64 2 1.0 6.0 7.54 9.1 7.54 2.0 10.94 13.68 15.99 13.68JHI-50-450 50 450 64 2 1.0 6.0 7.54 9.1 7.54 2.0 10.94 13.68 15.99 13.68

Hangers shown above are for 47mm joists, JHIs are available in widths of 39, 46, 50, 75, 100, 125, 150 and 198mm.Standard return sizes available 100, 115, 125, 140 & 215mm.

CE marked - Tested in accordance with EN846-8

Makes a major contribution to compliance with air leakage

H

W B

75

H

W B

R

Page 2: JH/JHI - Masonry Joist Hangers...JH/JHI - Masonry Joist Hangers PRODUCT DESCRIPTION The JH/JHI is the traditional timber - masonry hanger range. The higher side flanges help resist

IntroductionTim

ber To Masonry

Connections

Timber Fram

eE

ngineered Wood

Products (E

WP

)S

olid Timber/R

oof TrussTruss To W

allplateC

onnectionsM

ultiple C

onnectionsR

estraint Straps

Ancillary P

roductsC

ustom C

onnectorD

esign Template

[email protected] 11

JH/JHI - Masonry Joist Hangers

JH Performance - Roof Truss & Solid Timber Joists

Product Code

DimensionsFixings(3.75 x30mm)

Safe Working Loads (kN) Characteristic Capacity of Hanger (kN)

UpliftShortTerm

Masonry Crushing Strength

Uplift

Masonry Crushing Strength

W H B Truss / Joist

2.8 N/mm2 3.5 N/mm2 7.0 N/mm2 2.8 N/mm2 3.5 N/mm2 7.0 N/mm2

All widths All widths 38 to100mm wide

125 to198mm wide All widths All widths 38 to

100mm wide125 to

198mm wideJH-50-150 50 140 64 2 1.0 6.0 7.54 9.1 7.54 2 10.94 13.68 15.99 13.68

JH-50-175 50 165 64 2 1.0 6.0 7.54 9.1 7.54 2 10.94 13.68 15.99 13.68

JH-50-200 50 190 64 2 1.0 6.0 7.54 9.1 7.54 2 10.94 13.68 15.99 13.68

JH-50-225 50 215 64 2 1.0 6.0 7.54 9.1 7.54 2 10.94 13.68 15.99 13.68

JH-50-250 50 240 64 2 1.0 6.0 7.54 9.1 7.54 2 10.94 13.68 15.99 13.68

JH-50-275 50 265 64 2 1.0 6.0 7.54 9.1 7.54 2 10.94 13.68 15.99 13.68

JH-50-300 50 290 64 2 1.0 6.0 7.54 9.1 7.54 2 10.94 13.68 15.99 13.68

Hangers shown above are for 47mm joists, JHs are available in widths of 38, 44, 47, 50, 63, 75, 88, 92, 100, 125, 150 and 198mm.Standard return sizes available 100, 115, 125, 140 & 215mm.

ORDER DETAILS - JHR/JHIR - RETURN STYLE HANGERTo specify return style hangers add “R” to the standard JH product code.

Example(50 x 200 timber on 100mm blockwork)JH 50-200 with a 100mm return flange = JHR-50-200-100

ORDER DETAILS - JHST/JHIST - STRADDLE STYLE HANGERTo specify straddle style hangers add “ST” to the standard JH product code.

Example(2no. 50 x 200 timber on 100mm blockwork)JH 50-200 x (2) to suit 100mm blockwork = JHST-50-200-100

General Notes

Joist hanger must abut face of masonry wall to perform as quoted. Specifying return style hangers improves the chances of on-site compliance and produces a more robust detail.All hangers to suit timbers 150mm deep and above are manufactured with their H dimension 10mm undersize to allow for notching to provide a flush ceiling line.In order to achieve the stated safe working loads/characteristic capacities all masonry must be fully cured and a minimum of three block course (675mm) must be constructed above hanger. Where no masonry exists above see Cullen’s RA or RBJH.R dimension stands for return tab only and does not provide restraint.

1.

2.

3.

4.

ImportantParallel restraint is required for Joist Hangers, except the RA. For information on restraint refer to page 107.

ImportantIn order to achieve the stated safe working loads all masonry must be fully cured and a minimum of three block course (675mm) must be constructed above hanger before floor is loaded.

Fixing to Steel

Masonry hanger positioned on top flange of steelwork and fixed directly to top flange by shot firing (maximum steel fixing thickness 12mm) using:

- 4no. Spit Spitfire P370 Cartridge tool using SC9 nails or equivalent, into the hanger top flanges (2no. fixings per leg).

SAFE WORKING LOADS (kN) for all hangers 7.45kN - uplift 1kN.

Alternative fixing to shot firing, fix hanger top flange directly to top flange of steelwork using 4no. Tek screws.

SAFE WORKING LOADS (kN) for all hangers 6.90kN - uplift 1kN.

Fixing through top flange

Maximum gap from truss/joist to blockwork = 6mm

Rear face of hanger must tightly abut the blockworkGap = 0mm

675mmmin.