www.studioefabrics.net

Fabric Requirements Additional Supplies Needed

Featuring fabrics from the Jewels of the Jungle collection by Lori Anzalone for

PROCESS COLOR:

GRAYSCALE:

B/W:

Batting 61” x 85” (Recommended: Air Lite® Colour Me 100% Cotton)Piecing and sewing threadQuilting and sewing supplies

QUILT 1

Quilt designed by Heidi PridemoreFinished Quilt Size 53" x 77"Skill Level: Advanced Beginner

* Includes Binding** Peppered Cottons Collection

Jewels of the JungleJewels of the JungleJewels of the JungleJewels of the JungleA Free Project SheetNOT FOR RESALE

Please check our website for pattern updates before starting this project.

(A) 5567P-17 ........... 1 panel(B) 5559-9 ................ 1 ¾ yards(C) 5558-9 ................. ¼ yard (D) Surf-75**............. ½ yard(E) 5556-99 .............. ½ yard(F) 5557-17 .............. ¼ yard(G) 5560-9 ................. ¼ yard(H) 5563-17 ............. ¼ yard

(I) 5564-9 .................. ¼ yard(J) 5565-99 ............... ¼ yard(K) 5561-17 .............. 2 yards(L) Carbon-23**....... ⅝ yard*Backing 5562-99 .............. 5 yards

www.studioefabrics.net•STUDIO e PROJECTS• Page 2 of 6

Fabrics in the Collection

Select Fabrics from Peppered Cottons

Reptile Skin TextureBlack – 5556-99

Patterned Colored FrogCerulean – 5557-17

Rainbow FrogWhite – 5558-9

Tonal FrogWhite – 5559-9

Leaping Frog and InsectWhite – 5560-9

Floral and FaunaCerulean – 5561-17

Small Frog Tossed AlloverBlack – 5562-99

Frog and FoliageCerulean – 5563-17

Frog and Dragonfly AlloverWhite – 5564-9

Piled-Up FrogBlack – 5565-99

Continuous Yardage BlockBlack – 5566-99

Frog Banner PanelCerulean – 5567P-17

CarbonCarbon-23

SurfSurf-75

MidnightMidnight-82

www.studioefabrics.net•STUDIO e PROJECTS• Page 3 of 6

CuttingCutting InstructionsPlease note: All strips are cut across the width of fabric (WOF) from selvage to selvage edge unless otherwise noted.

WOF= Width of Fabric • LOF = Length of Fabric

Fabric A (5567P-17 Frog Banner Panel – Cerulean), fussy cut:• (1) 20 ½” x 42 ½” rectangle, centered on the panel.

Fabric B (5559-9 Tonal Frog – White), cut:• (2) 4” x 25 ½” WOF strips. • (2) 3” x 42 ½” WOF strips, piece as needed.• (4) 2 ⅞” x WOF strips, sub-cut (44) 2 ⅞” squares.• (4) 2” x WOF strips. Sew the strips together, end to end, with diagonal seams and cut (2) 2” x 64 ½” strips.• (3) 2” x WOF strips. Sew the strips together, end to end, with diagonal seams and cut (2) 2” x 43 ½” strips.• (10) 1 ½” x WOF strips, sub-cut (88) 1 ½” x 4 ½” strips.

Fabric C (5558-9 Rainbow Frog – White), cut:• (1) 4 ½” x WOF strip, sub-cut (4) 4 ½” squares.

Fabric D (Surf-75 Peppered Cottons – Surf), cut:• (10) 1 ½” x WOF strips, sub-cut (88) 1 ½” x 4 ½” strips.

Fabric E (5556-99 – Reptile Skin Texture – Black), cut:• (4) 2 ⅞” x WOF strips, sub-cut (44) 2 ⅞” squares.

Fabric F (5557-17 Patterned Color Frog – Cerulean), cut:• (1) 4 ½” x WOF strip, sub-cut (4) 4 ½” squares.

Fabric G (5560-9 Leaping Frog and Insect – White), cut:• (1) 4 ½” x WOF strip, sub-cut (4) 4 ½” squares.

Fabric H (5563-17 Frog and Foliage – Cerulean), cut:• (1) 4 ½” x WOF strip, sub-cut (4) 4 ½” squares.

Fabric I (5564-9 Frog and Dragonfly Allover – White)• (1) 4 ½” x WOF strip, sub-cut (3) 4 ½” squares.

Fabric J (5565-99 Piled-up Frog – Black), cut:• (1) 4 ½” x WOF strip, sub-cut (3) 4 ½” squares.

Fabric K (5561-17 Flora and Fauna – Cerulean), cut:• (2) 5 ½” x 67 ½” LOF strips.• From the remaining fabric, cut (2) 5 ½” x 53 ½” WOF strips, piece as needed.

Fabric L (Carbon-23 Peppered Cottons – Carbon), cut:• (7) 2 ½” x WOF strips for the binding.

Backing (5562-99 Small Frog Tossed Allover – Black), cut:• (2) 85” x WOF strips. Sew the strips together and trim to 61” x 85” to make the back.

www.studioefabrics.net•STUDIO e PROJECTS• Page 4 of 6

SewingSew using a ¼” seam allowance with right sides together (RST) unless otherwise indicated. Always

press towards the darker fabric while assembling, unless otherwise noted by the arrows.

Fig. 2

Fig. 1

Fig. 3 Fig. 4

Fig. 5

Fig. 6

Block Assembly Note: The arrows in figures represent the fabric print direction. Pay attention to the fabric and unit orientations when assembling the various components.

B

A

Trim blockto measure

24 ½” x 48 ½”AFTER adding

Fabric B borders

B B

BCenter Block

Unit 1make 88

BE

Unit 2make 88

B

D

Block Onemake 4

H

Unit 2

Unit1

Unit1

Unit1

Uni

t1

Unit 2

Unit 2 U

nit 2

1. Sew (1) 3” x 42 ½” Fabric B strip to each side of the 20 ½” x 42 ½” Fabric A panel. Sew (1) 4” x 25 ½” Fabric B strip to the top and to the bottom of the Fabric A panel to make the Center Block (Fig. 1). Trim the block to measure 24 ½” x 48 ½”.

2. Place (1) 2 ⅞” Fabric B square on top of (1) 2 ⅞” Fabric E square, right sides together. Draw a line across the diagonal of the top square (Fig. 2). Sew ¼” away from each side of the drawn diagonal line (Fig. 2). Cut the (2) squares apart on the drawn diagonal line (Fig. 3) to make (2) half-square triangles. Trim the half-square triangles to measure 2 ½” square to make (2) Unit 1 squares (Fig. 4). Repeat to make (88) Unit 1 squares total.

3. Sew (1) 1 ½” x 4 ½” Fabric D strip to the top of (1) 1 ½” x 4 ½” Fabric B strip lengthwise to make (1) Unit 2 strip (Fig. 5). Repeat to make (88) Unit 2 strips total.

4. Sew (1) Unit 1 square to each end of (1) Unit 2 strip to make the top row. Repeat to make the bottom row. Sew (1) Unit 2 strip to each side of (1) 4 ½” Fabric H square to make the middle row. Sew the (3) rows together lengthwise to make (1) Block One square (Fig. 6). Repeat to make (4) Block One squares total.

www.studioefabrics.net•STUDIO e PROJECTS• Page 5 of 6

Fig. 7 Fig. 8 Fig. 9 Fig. 10 Fig. 11

Fig. 13Fig. 12

Fig. 15Fig. 14

Block Twomake 4

G

Unit 2

Unit1

Unit1

Unit1

Uni

t1

Unit 2U

nit 2

Unit 2

Block Threemake 4

F

Unit1

Unit1

Unit1

Uni

t1

Unit 2 U

nit 2

Unit 2

Unit 2

Block Fourmake 4

C

Unit1

Unit1

Unit1

Uni

t1

Unit 2U

nit 2

Unit 2

Unit 2

Block Fivemake 3

J

Unit1

Unit1

Unit1

Uni

t1

Unit 2 U

nit 2

Unit 2

Unit 2

Block Sixmake 3

I

Unit1

Unit1

Unit1

Uni

t1

Unit 2U

nit 2

Unit 2

Unit 2

Left SideBorder

1

3

5

2

4

6

Right SideBorder

1

3

5

2

4

6

Top Border

13 24 6Bottom Border

1 532 4

Quilt Top Assembly (Follow the Quilt Layout while assembling the quilt top.)10. Sew the Left Side Border and Right Side Border to the left and to the right of the Center Block. Sew the Top Border and Bottom Border to the top and to the bottom of the Center Block.

11. Sew (1) 2” x 64 ½” Fabric B strip to each side of the Center Block. Sew (1) 2” x 43 ½” Fabric B strip to the top and to the bottom of the Center Block.

12. Sew (1) 5 ½” x 67 ½” Fabric K strip to each side of the Center Block. Sew (1) 5 ½” x 53 ½” Fabric K strip to the top and to the bottom of the Center Block to make the quilt top.

5. Repeat Step 4 and refer to Figures 7-11 for component identification, location and orientation to make (4) Block Two squares. (4) Block Three squares, (4) Block Four squares, (3) Block Five squares and (3) Block Six squares.

6. Follow Figure 12 and sew together (6) assorted blocks to make the Left Side Border.

7. Follow Figure 13 and sew together (6) assorted blocks to make the Right Side Border.

8. Follow Figure 14 and sew together (5) assorted blocks to make the Top Border.

9. Follow Figure 15 and sew together (5) assorted blocks to make the Bottom Border.

© 2020 Studio e Fabrics®

Every effort has been made to ensure that all projects are error free. All the information is presented in good faith, however no warranty can be given nor results guaranteed as we have no control over the execution of instructions. Therefore, we assume no responsibility for the use of this information or damages that may occur as a result. When errors are brought to our attention, we make every effort to correct and post a revision as soon as possible. Please make sure to check www.studioefabrics.net for pattern updates prior to starting the project. We also recommend that you test the project prior to cutting for kits. Finally, all free projects are intended to remain free to you and are not for resale.

Page 6 of 6www.studioefabrics.net•STUDIO e PROJECTS•

Quilt Layout

KB

B BCenter Block

K

K K

Layering, Quilting and Finishing13. Press the quilt top and 61” x 85” backing well. Layer backing (wrong side up), batting, pressed quilt top (right side up) and baste. Quilt as desired and trim excess batting and backing when quilting is complete.

Binding14. Cut the ends of the (7) Fabric L binding strips at a 45-degree angle and sew end to end to make (1) continuous piece of binding. Fold in half lengthwise and press wrong sides together.

15. Sew the binding to the front of the quilt, raw edges together. Turn the folded edge to the back, and hand stitch in place.