Embed Size (px)
DESCRIPTION
Jeopardy. Choose a category. You will be given the answer. You must give the correct question. Click to begin. Choose a point value. Choose a point value. Click here for Final Jeopardy. Safety Quiz. Measurement. Picture Holder. Piggy bank. Misc. 10 Point. 10 Point. 10 Point. - PowerPoint PPT Presentation
Citation preview
Choose a category. You will be given the answer.
You must give the correct question. Click to begin.
Click here for Final Jeopardy
Measurement Piggy bank Misc.
10 Point
20 Points
30 Points
40 Points
50 Points
10 Point 10 Point 10 Point 10 Point
20 Points 20 Points 20 Points 20 Points
30 Points
40 Points
50 Points
30 Points 30 Points 30 Points
40 Points 40 Points 40 Points
50 Points 50 Points 50 Points
Picture Holder
SafetyQuiz
Must be worn in the lab at all times
What are safety glasses or safety
goggles?
Keep your fingers away from this on
the disc sander
What is the rotation disc
Should be removed when
working with tools and machines
What is rings and watches
The area on a saw, fingers should not
be placed
What is the path of the blade
Should be reported to your teacher…
What are any injuries
Answer 1b
What is 1 ¼
Answer 2b
What is ½
Answer 3b
What is 2
What is 7/8
What is 1 13/16
Used to cut the corners on the picture holder
What is the Scroll Saw
The first sand paper used
What is 120
The tool used to shine the edges of
the plastic
What is the Buffer?
The tool that heated the plastic to bend
it.
What is the strip heater
Your boyfriend, girlfriend, mom, or
dad.
Who are the people you can put in your
picture holder?
2 squares of plastic, 1 piece of wood, 6 screws,
and a piece of vinyl
What is the material need to make your piggy
bank
The saw used to cut your block of
wood
What is the Band Saw?
Tool used to make a large hole in your block of
wood.
What is the Drill Press?
Colors and protects the wood
What is stain
Vinyl was used to create this on your
bank
What is a $ or cent sticker
Mr. Ihde or Mr. Peters
Who are your
Tech-Ed Teachers
The coldest and best in the building
What is the
Tech-Ed Bubbler
The class you now move to
What is key boarding
The tool used to create your screw
drivers
What is the injection molder
$5.00
What is the cost of your lab fee’s
Make your wager
This is where 90% of all robots are
used today
What are factories?
