Revised: 18/06/2019

Jenflow Resin Bound Training Course:

Aims & Objectives

Revised: 18/06/2019

Module 1: Health & Safety

Aims

On completion of this module you will have understanding & knowledge of:

• the importance of using Personal Protective Equipment (PPE) & the implications of not using it.

• the appropriate PPE to use when using Jenflow products and the difference in PPE requirements from product to

product.

• correct treatment procedures if injury or illness should occur

• conditions such as Epoxy Sensitization

• Preventative measures i.e. PPE

• Product disposal

• Environment Impact

Course Scope

On attendance of a Jenflow Systems Resin Bound Course a trainee will attain a wealth of knowledge &

practical experiences. This course aims to give attendees the knowledge to enable them to install resin

bound systems competently & independently. During the course trainees will have various aims & objec-

tives to achieve which will be assessed through written assessment. The course covers 10 different mod-

ules (Health & Safety, Product information, New Bases, Pre Existing Bases, Resin bound Installation,

Common problems, Rubber crumb installations . Aims & Objectives for the different course modules are

listed below.

Module 2: Product Information

Aims

On completion of this module you will have understanding & knowledge of:

• Scope & purpose of each product

• Jenflow resin bound products

• Benefits & limitations of products

• Bond Vs Bound

• Equipment & tooling required

Module 3: New Base Installation

Aims

On completion of this module you will have understand & knowledge of:

• Different Bases

• Complete installation process of different bases

• Importance of various bases

• Testing sub-grade

• Strength of the sub-grade

• Sustainable drainage systems

• Specifications of different bases

Revised: 18/06/2019

Module 5: Resin Bound Installation Aims

On completion of this module you will have understand & knowledge of:

• Installation procedures

• Technical Information

• Thickness Guidelines

• Pointers for installation with ease

• Correct cleaning of tools

Module 4: Pre—Existing Bases

Aims

On completion of this module you will have understand & knowledge of:

• Correct base preparation methods for pre—existing bases

• Non compatible base

• Inspection of existing bases

• Crack repair

• Things to consider prior to install

• Expansion Joints

Module 6: Common problems + Consequences.

Aims:

On completion of this module you will have understanding & knowledge of:

• Main problems faced when installing resin bound

• Consequences of problems if not rectified.

• Consequences of poor preparation

• Effects of temperature

• Maintenance of a resin bound system

Revised: 18/06/2019

Module 7: Rubber Crumb & Tree Pits

Aims:

On completion of this module you will have understand & knowledge of:

• Correct mixing procedure in regards to rubber crumb

• Rubber crumb resin calculations

• Rubber crumb application

• Critical fall height

• Compatible bases

• Tree Pit Installation

Objectives

For the assessment component the objectives are:

• To demonstrate knowledge & understanding of all modules through a written knowledge assessment

• To read and understand the Jenflow Resin Bound Manual to assist with the assessment

• To complete the Jenflow Resin Bound training course which will give sufficient knowledge to enable trainees

to sit the written assessment