JCM Tapping Sleeve Selection Chart

JCM Model Number

Body Material Gasket StyleOutlet

MaterialOutlet Style

418438

Carbon Steel304 Stainless Steel

Outlet SealOutlet Seal

Carbon Steel304 Stainless Steel

Threaded OutletThreaded Outlet

412419422429

Carbon SteelCarbon SteelCarbon SteelCarbon Steel

Outlet SealOutlet SealOutlet SealOutlet Seal

Carbon SteelCarbon SteelCarbon SteelCarbon Steel

FlangedMechanical JointFlangedMechanical Joint

432439462469

304 Stainless Steel304 Stainless Steel304 Stainless Steel304 Stainless Steel

Full CircumferentialFull CircumferentialFull CircumferentialFull Circumferential

304 Stainless Steel304 Stainless Steel

Carbon SteelCarbon Steel

FlangedMechanical JointFlangedMechanical Joint

432 (T2) 304 Stainless Steel Full Circumferential 304 Stainless Steel Flanged

452459464465

304 Stainless Steel304 Stainless Steel304 Stainless Steel304 Stainless Steel

Outlet SealOutlet SealOutlet SealOutlet Seal

304 Stainless Steel304 Stainless Steel

Carbon SteelCarbon Steel

FlangedMechanical JointFlangedMechanical Joint

64326439643864526459

316 Stainless Steel316 Stainless Steel316 Stainless Steel316 Stainless Steel316 Stainless Steel

Full CircumferentialFull Circumferential

Outlet SealOutlet SealOutlet Seal

316 Stainless Steel316 Stainless Steel316 Stainless Steel316 Stainless Steel316 Stainless Steel

316 Flanged316 Mechanical Joint316 Threaded Outlet316 Flanged316 Mechanical Joint

JCM TAPPING SLEEVESMORE SELECTION, BENEFITS, OPTIONS

Specifying the right tapping sleeve for the condition of the job is the best way to assure asuccessful tap. JCM Tapping Sleeves are readily available in a wide variety of types and optionsto meet your exact conditions. High strength to weight ratio, built-in range and large gasketcross sections are just some of the design features that make JCM Tapping Sleeve highlydesirable on critical installations.

JCM’s expanded tapping sleeve selections and versatility assist our customers in selecting thecorrect JCM Model Tapping Sleeve for the job. Below is a chart that defines each tappingsleeve offering, its body material, design and gasket style along with the outlet material andstyle.

For specialty, engineered tapping sleeves, refer to the JCM Industries Engineered FittingsSpecification Manual. This manual includes: mechanical joint tapping sleeves, concrete steelcylinder pipe tapping sleeves, large diameter and unique contour sleeves along with numerousoptions and designs.

JCM Carbon Steel Fabricated Tapping Sleeve Selection Guide

PRODUCT NUMBER & TYPE APPLICATION, SIZES AND INFORMATION

411 Plain Outlet Sleeve

Most economical sleeve for dry taps and connections tobe made without a valve. Also excellent as a basesleeve for special sleeves. Available with reducing andsize on size outlets for all types of pipe, 6” and larger.

412 Flanged Outlet Tapping Sleeve

422 Flanged Outlet Tapping Sleeve for PVC & Steel Pipe

413 Flanged Outlet Tapping Cross

The standard sleeve for quick, economical taps on alltypes of pipe, standard or high pressure service. Mostavailable of all types in standard or special sizes.Available with reducing and size on size outlets, pipesizes 6” and larger. Special outlets readily available.

Specially designed tapping sleeve for the exact O.D. ofsteel pipe, IPS PVC and C-900. Sizes 4” -12”.

Quick economical cross for all types of pipe 8” andlarger. Outlets must be minimum of three nominal sizessmaller than run. Made similar to the 412, the sleevelength is extended to provide more pipe support.

414 Mechanical Joint Tapping Sleeve & Cross

The sleeve with side and end gaskets to provide extramargin of safety on lines which are subject to problemsof beam loads. Available with size on size and reducingoutlets. Competitive with cast sleeves in larger andspecial sizes. Excellent availability.

415 Concrete Steel Cylinder Tapping Sleeve

Designed to tap all types and brands of concrete steelcylinder pipe. Sleeve reinforces pipe prior to cutting ofpipe reinforcing rod. Extra heavy retained gasket andeasily installed gland provide a locked in, positive seal.Available with reducing outlets in pipe sizes 16” andlarger.

416 Weld OnOutlets

417 Weld onTapping Sleeve

Outlets, partial sleeves and complete sleeves for pipesizes 6” and larger with size on size and reducingoutlets. These outlets are designed for steel pipe withwall thickness of 1/4” and greater.

Split weld on sleeve designed to reinforce pipe to betapped. Standard sleeve thickness 1/4”.

JCM Carbon Steel Fabricated Tapping Sleeve Selection Guide

JCM Tapping Sleeves meet or exceed the ANSI/AWWA C-223 and the MSS-SP 124 Standards as applicable.

PRODUCT NUMBER & TYPE APPLICATION, SIZES AND ADDITIONAL INFORMATION

418 Threaded Outlet Tapping Sleeve

For taps and connections in larger sizes of pipe (serviceconnections, taps for air relief valves). Heavy gasket sec-tion and full sleeve offer better performance than strappedsaddle, yet competitively priced. Available with IPS outlets,pipe sizes 4” and larger, outlets 3/4” - 4”, in standard shopcoat alloy bolts or epoxy coated/stainless steel bolts.

419 Fabricated Carbon Steel Tapping Sleeve with Mechanical Joint Outlet*

429 Fabricated Carbon Steel Tap Sleeve with MJ Outlet* for IPS PVC, C-900 PVC and Steel Pipe sizes

New from JCM Fabricated Carbon Steel Tapping Sleevewith TRUE Mechanical Joint Outlet. Durable construction,alignment set pins and “monocast” mechanical joint outletprovides a competitive option for using MJ valves in lieu oftapping valves. Available in shopcoat or epoxy, standard orstainless steel hardware. Sizes 4” and larger up through12” outlets. JCM 429 is provided standard epoxy coated.

JCM Mechanical Joint Outlets meet AWWA C-111/ANSI 21.11Standard Dimensions

*Licensed by PowerSeal Corporation U. S. Patent No. 6,227,234

440 Line Stop Fitting

Largest selection of options in the industry. Available in allJCM sleeve body/material combinations with options ofthreaded plug or push pin plug.

Designed for use on 150 PSI piping systems, the heaviermaterials and extra bolting power built into these sleeveseliminate flexing and provides extra sealing capability nec-essary for long term performance. The heavy all stainlessconstruction and full circumferential sealing gasket meansthese non-compromising sleeves will be trouble free andbecome a permanent part of the piping system just as themechanical joint fittings already in use.Carbon SteelStainless SteelCombination Stainless/Carbon

JCM Stainless Steel (304) Tapping Sleeve Selection Guide

JCM Tapping Sleeves meet or exceed the ANSI/AWWA C-223 and the MSS-SP 124 Standards as applicable.

PRODUCT NUMBER & TYPE APPLICATION, SIZES AND ADDITIONAL INFORMATION

438 All Stainless Steel Threaded Outlet Tapping Sleeve

All stainless steel construction for taps and connections oflarger sizes of pipe in corrosive, acidic environments. The438 is available construction of either 304 or 316 StainlessSteel. Heavy gasket section and full sleeve offer betterperformance than strapped saddle, yet competitivelypriced. Available with IPS outlets, pipe sizes 4” and larger,outlets 3/4” - 4”

432 All Stainless Steel Tapping Sleeve

462 Stainless Steel Tapping Sleeve with Carbon Steel Flange

The sleeve for taps requiring full circumferential seal withhigh safety factor. Strong stainless construction withindependent bolting for higher bolt torque capabilities.Sizes 4” - 24”.

432 Type 2Fabricated Lug Lightweight All Stainless Steel Tapping Sleeve

NEW FROM JCM

Stainless steel sleeves featuring the full circumferential gasket foreconomical, non complex applications. Available in all stainless orstainless carbon combination.Sizes 4” - 16”.

452 All Stainless Steel Tapping Sleeve withOutlet Seal Gasket

464 Stainless Steel Tapping Sleeve with Outlet Seal GasketCarbon Steel Flange

Stainless steel tapping sleeve for large diameter pipe andhigh pressure applications. Stainless construction providessuperior corrosion resistance for long term service. Sizes 6”and larger.

JCM Stainless Steel (304) Tapping Sleeve Selection Guide

JCM Tapping Sleeves meet or exceed the ANSI/AWWA C-223 and the MSS-SP 124 Standards as applicable.

PRODUCT NUMBER & TYPE APPLICATION, SIZES AND ADDITIONAL INFORMATION

452 All Stainless Steel Tapping Sleeve withOutlet Seal Gasket

464 Stainless Steel Tapping Sleeve with Outlet Seal GasketCarbon Steel Flange

Stainless steel tapping sleeve for large diameter pipe andhigh pressure applications. Stainless construction providessuperior corrosion resistance for long term service. Sizes 6”and larger.

439 All Stainless Steel Sleeve with Mechanical Joint Outlet*

469 Stainless SteelSleeve with Carbon Steel Mechanical Joint Outlet*

459 All Stainless Steel Sleeve with Mechanical Joint Outlet*

465 Stainless Steel Sleeve with Outlet Seal Gasket and Carbon Steel Mechanical Joint Outlet*

True mechanical joint outlet tapping sleeve reducesapplication costs and inventory by utilizing MJ gate valve inlieu of tapping valve. All stainless steel constructionprovides corrosion resistance. Unique load bearing set pinstransfer load and prevents movement or misalignmentduring or after the tap. Available in full circumferentialgasket style or outlet seal gasket style. Sizes: Outlets 4” -12”, pipe sizes 4” and larger.

JCM Mechanical Joint Outlets meet AWWA C-111/ANSI 21.11Standard Dimensions

*Licensed by PowerSeal Corporation U. S. Patent No. 6,227,234

JCM Stainless Steel (316) Tapping Sleeve Selection GuideTapping Sleeves featured are available constructed of ALL 316 Stainless Steel material. Four digitmodel numbers reflect JCM standard tapping sleeve design style and outlet configuration. Fittingsare available in same O.D. ranges and outlet sizes as their corresponding model numbers indicate.These fittings are priced on application. Contact JCM Inside Sales Team for information.

JCM Tapping Sleeves meet or exceed the ANSI/AWWA C-223 and the MSS-SP 124 Standards as applicable.

PRODUCT NUMBER & TYPE APPLICATION, SIZES AND ADDITIONAL INFORMATION

6438 All 316 Stainless Steel Threaded Outlet Tapping Sleeve

All 316 stainless steel construction for taps and connectionsof larger sizes of pipe in corrosive, saltwater and extremeacidic environments. Heavy gasket section and full sleeveoffer better performance than strapped saddle. Available withIPS outlets, pipe sizes 4” and larger, outlets 3/4” - 4”

6432 All 316 Stainless Steel Tapping Sleeve

The sleeve for taps requiring full circumferential seal with highsafety factor. Strong stainless construction with independentbolting for higher bolt torque capabilities.Sizes 4” - 24”.

6452 All 316 Stainless Steel Tapping Sleeve withOutlet Seal Gasket

Stainless steel tapping sleeve for large diameter pipe andhigh pressure applications. Stainless construction providessuperior corrosion resistance for long term service. Sizes 6”and larger.

6439 All 316 Stainless Steel Sleeve with Mechanical Joint Outlet*

6459 All 316 Stainless Steel Sleeve with Mechanical Joint Outlet*

True mechanical joint outlet tapping sleeve reducesapplication costs and inventory by utilizing MJ gate valve inlieu of tapping valve. All stainless steel construction providescorrosion resistance. Unique load bearing set pins transferload and prevents movement or misalignment during or afterthe tap. Available in full circumferential gasket style or outletseal gasket style. Sizes: Outlets 4” - 12”, pipe sizes 4” andlarger.

JCM Mechanical Joint Outlets meet AWWA C-111/ANSI 21.11Standard Dimensions

*Licensed by PowerSeal Corporation U. S. Patent No. 6,227,234