Upload
jcb-tools
View
299
Download
26
Embed Size (px)
DESCRIPTION
Â
Citation preview
tools &accessories
www.JCB-tools.com
2
JCB are proud to launch their new range of professional quality tools andaccessories. The range has been designed and developed to meet the ever increasing standard and needs of both the trade and DIY users.
By using high quality materials and production technology each product offers multiple benefits to the user that increases performance and productivity.
3
ConTenTs
contents
Page Content
4 - 13 Drilling
14 - 15 Grinding
16 - 19 Sawing
20 - 21 Routing
22 - 23 Multi-Tool
24 - 28 Sanding
29 Planing
30 - 31 Site Kits
32 - 35 Compressors
36 - 57 Drilling Accessories
58 - 66 Cutting Accessories
67 Sanding Accessories
68 - 69 Accessory Sets
70 - 79 Cutting Tools
80 - 85 Fastening Tools
86 - 91 Pliers & Wrenches
92 - 101 Striking Tools
102 - 105 Measuring Tools
106 - 113 Tool Storage
4
power tools
5
5x Longer Motor Life
25% More Power
50% More Runtime
Brushless motors have fewer wearable moving parts, resulting in greatly increased motor life.
Few moving parts creates a quiet motor that never needs maintenance. Less wearable moving parts enables better use of available energy from the battery pack as there is no friction from brushes to slow the motor down.
Carbon brush resistance is eliminated, so less battery energy is wasted. The efficiency of a Brushless motor means greater run time on each charge.
drilling
6
Lithium-Ion technology - lighter, more powerful, no loss of charge.
A brushless motor gives - 50% longer run time and 5 x longer motor life than a standard motor
13mm all metal single sleeve chuck
16mm masonry drill capacity
CoRDLessDRILLIng
20V Lithium-Ion Brushless Combi Drill
drilling
• 1 x 3.0Ah battery• 75 minute charger• No-load speed: 0-600/0-2000/min,
impact rate: 0-8300/0-27700bpm• Torque position 22+1+1• Max Torque 35/50Nm• Drilling/cutting capacity wood
38mm, metal 13mm• JCB nylon carry bag for storage
Item number Description
G05001JCB JCB 20V Lithium-Ion Brushless Combi Drill
7
A brushless motor gives - 50% longer run time and 5 x longer motor life than a standard motor
Lithium-Ion technology - lighter, more powerful, no loss of charge. extended run time 3.0Ah battery
1/4” Hex drive
140nm torque
CoRDLessDRILLIng
20V Lithium-Ion Brushless Impact Driver
drilling
• 1 x 3.0Ah battery• 75 minute charger• No-load speed: 0-2900/min• Impact rate : 0-3300bpm• JCB nylon carry bag for storage
Item number Description
G05002JCB JCB 220V Lithium-Ion Brushless Impact Driver
8 drilling
Also available as part of a twin pack
CoRDLessDRILLIng
12V Lithium-Ion Cordless Drill Driver
Lithium-Ion technology - lighter, more powerful and no loss of charge
Lithium-Ion technology - lighter, more powerful and no loss of charge
• 2 x 1.3Ah batteries• 30 minute charger• Speed 0-350/0-1300/min• Chuck 10mm• Torque position 15+1• Max torque 14/24Nm• Drilling/cutting capacity wood
20mm, steel 10mm• JCB nylon carry bag for storage
12V Lithium-Ion Cordless Impact Driver
• 2 x 1.3Ah batteries• 30 minute charger• Speed 0-2400/min (impact driver)• 0-350/0-1300/min (drill driver)• Chuck 1/4” Hex 10mm (impact driver)• Torque position 15+1 (drill driver)• Max torque 90Nm (impact driver)• 14/24Nm (drill driver)• Drilling/cutting capacity wood 20mm,
steel 10mm• JCB nylon carry bag for storage
Item number Description
G05007JCB JCB 12V Lithium-Ion Cordless Drill Driver
G05023JCB JCB 12V Lithium-Ion Cordless Impact Driver
G05008JCB JCB 12V Lithium-Ion Twin Pack
9
CoRDLessDRILLIng
20V Lithium-Ion Cordless Combi Drill
22 torque settings & 50nm torque
13mm single sleeve chuck
new compact body design - 20% smaller than JCB 1st generation
Lithium-Ion technology - lighter, more powerful, no loss of charge.
• 2 x 1.5Ah batteries• 3 hour charger• JCB nylon carry bag for storage
Item number Description
G05001JCB JCB 20V Lithium-Ion Cordless Combi Drill
drilling
10
2 speed gear box with variable speed for efficient performance
2 function - rotary drilling and hammer drilling
13mm chuck
HAMMERDRILLIng
900W Hammer Drill
drilling
• Speed 0-1400/0-2700• Impact rate impact rate: 22400-43200bpm • Drilling/cutting capacity wood 40mm, steel
13mm, masonry 20mm• 3m cable • JCB hard case for storage
Item number Description
G05006JCB JCB 900W Hammer Drill
11
Motor overload protection
sDsDRILLIng
780W SDS Plus Hammer Drill
sDs plus chuck capacity 26mm concrete
3 function - drilling, hammer drilling & chiseling
• Speed 0-1300/min• Battery impact rate: 0-4600bpm• Battery indicator impact power: 2.8J• Drilling/cutting capacity wood 32mm, steel
13mm, masonry 26mm• 3m cable• JCB hard case for storage
drilling
Item number Description
G05011JCB JCB 780W SDS Plus Hammer Drill
12
sDsDRILLIng
920W SDS Plus Hammer Drill
Powerful 6J pneumatic hammer - delivers high energy impact
sDs plus detachable chuck capacity 32mm concrete
3 function - drilling, hammer drilling & chiseling
Motor overload protection
drilling
• Speed 0-720/min• Battery impact rate: 0-3500bpm• Battery indicator impact power: 6.0J • Drilling/cutting capacity wood 40mm, steel
13mm, masonry 32mm• 3m cable• JCB hard case for storage
Item number Description
G05012JCB JCB 920W SDS Plus Hammer Drill
13
14
Anti-vibration handle
CoRDeDgRInDIng
grinding
Quick release guard
Dust sealed bearings
115mm 720W Angle Grinder
Compact and slim body for comfortable use
• Disc size: 115mm• 2 position handle• Slide switch• No-load speed: 11000/min• 3m cable• JCB nylon carry bag for storage
Item number Description
G05022JCB JCB 115mm 720W Angle Grinder
15
Compact and slim body for comfortable use
soft start for improved control
Anti-vibration handle
CoRDeDgRInDIng
230mm 2300W Angle Grinder
Quick release guard
grinding
• Disc size: 230mm• 3 position handle• Slide switch• No-load speed: 6500/min• 3m cable• JCB nylon carry bag for storage
Item number Description
G05013JCB JCB 230mm 2300W Angle Grinder
16 sAWing
1
2
The BevelTrac nib sits high off the working surface to give a clear view of the blades path along the marked cutting line.
The nib moves with the blade, so when cutting at an angle you still maintain your marked cutting line.
The unique BevelTrac technology gives you a clear guide along the marked cutting line, even at an angle. The nib sits proud of the dust to ensure you stay on track, with Conventional Circular saws the marked cutting line can become obstructed by dust during cutting of material. When cutting at an angle the nib moves with the blade enabling you to still keep that accurate straight cutting line.
Improves visibility along the cutting line...
Key feature
17
BevelTrac feature - improves visability along the cutting line for easy accurate bevel cutting
Aluminium guard plate for durability and improved performance
Max. cut capacity 66mm
CIRCULARSAWS
1500W 190MM Circular Saw
• Maximum cutting capacity in wood 66mm at 90º, 49mm at 45º
• No-load speed: 5000/min• Aluminium guard• 3m cable• JCB hard case for storage
Item number Description
G05005JCB JCB 190MM 1500W Circular Saw (PTA)
sAWing
18
CoRDeDJIGSAWS
sAWing
4 pendulum settings with dual air blow for optimised cutting
Aluminium gear housing and sole plate for durability & accuracy
Universal T shank blade fitment
710W Jigsaw
Tool-free, quick blade change
• 4 pendulum settings• Variable speed• No-load speed: 800-2800/min• LED light• 3m cable• JCB cloth bag for storage
Item number Description
G05004JCB JCB 710W Jigsaw
Lock-on button
19
3 position foot plate gives flexibility of cutting depth
Aluminium gear box for durability and prolonged life
Tool-free, quick blade change
ReCIPRoCATIngSAWS
1100W Reciprocating Saw
300mm wood cutting capacity
sAWing
• 28mm stroke length• Variable speed• No-load speed: 0-2700/min• LED light• 3m cable • JCB hard case for storage
Item number Description
G05014JCB JCB 1100W Reciprocating Saw
20
21
Micro adjustment for precision cutting depth
50mm plunge
soft start and constant speed for improved control
Variable speed control
POWERRoUTIng
2100W 1/4” & 1/2” Router
roUting
Item number Description
G05020JCB JCB 2100W 1/4” & 1/2” Router
• No-load speed: 11500-28000/min• 6.35mm(1/4”) and 12.7mm(1/2”) collets included• 3m cable
22
23
Varible speed control
Versatile tool for cutting, scraping, sanding, grinding and more
Tool-free accessory change
For blades, see page 64
300W Multi-Tool
Universal blade fitment - fits any accessory from any brand
• 3.2º oscillations• No-load speed: 11000-20000/min• 3m cable• JCB nylon carry bag for storage
Item number Description
G05015JCB JCB 300W Multi Tool
osCILLATIngMULTI-TooL
MUlti tool
24
Cyclonic bagless technology.no bag = no loss of suction
orbit diameter 2.5mm
Powerful 330W motor
Variable speed control
330W 125mm Random Orbital Sander
• No-load speed: 6000-12000/min• Base diameter 125mm• Dirt box• Hook & loop attachment• 3m cable
Item number Description
G05016JCB JCB 125mm 330W Random Orbital Sander
POWERsAnDIng
sAnding
25
POWERsAnDIng
sAnding
Cyclonic bagless technology.no bag = no loss of suction
orbit diameter 1.6mm
Hook & loop and clip fastening system
240W 1/4 Sheet Sander
Item number Description
G05003JCB JCB 240W 1/4 Sheet Sander
• No-load speed: 15000/min• Base size 103x110mm• Dirt box• Hook & loop attachment• 3m cable
26
Cyclonic bagless technology.no bag = no loss of suction
orbit diameter 2.4mmHook & loop and clip fastening system
POWERsAnDIng
280W 1/3 Sheet Finishing Sander
Aluminium base for increased accuracy
sAnding
Item number Description
G05017JCB JCB 280W 1/3 Sheet Finishing Sander
• No-load speed: 6000-12000/min• Base size 90x187mm• Dirt box• Hook & loop attachment• 3m cable
27
POWERsAnDIng
Aluminium base for increased accuracy
sAnding
360W 1/2 Sheet Finishing Sander
orbit diameter 2.4mm
Cyclonic bagless technology.no bag = no loss, of suction
Hook & loop and clip fastening system
Item number Description
G05018JCB JCB 360W 1/2 Sheet Finishing Sander
• No-load speed: 6000-11000/min• Variable speed• Base size113x225mm• Dirt box• Hook & loop attachment• 3m cable
28
Accurate belt centering system
Variable speed control
BeLTsAnDIng
950W Belt Sander
Quick release belt system
sAnding
Item number Description
G05019JCB JCB 950W Belt Sander
• No-load speed: 240-350/min• Sanding area 76x130mm• Belt size 76x533mm• 3m cable
29
POWERPLAnIng
PlAning
Dual sided chip ejection with bag
3 chamfer grooves
Rest stand to protect work surface
4mm depth adjustment
1050W Power Planer
Item number Description
G05020JCB JCB 1050W Power Planer
• Plane depth 4mm• Maximum rebate depth 14mm• Aluminium base• 3m cable
30 site kits
sITeKITs
20V Brushless Combi Drill
Compatible with JCB site system
20V Brushless Impact Driver
Brushless Twin Pack
Item number Description
G05025JCB JCB Brushless Twin Pack
31
sITeKITs
site kits
115mm Angle grinder
240W 1/4 Sheet sander
20V Brushless Impact Driver 20V Brushless
Combi Drill710W Jigsaw
190mm Circular saw
Compatible with JCB site system
6 Piece site Kit
Item number Description
G05024JCB JCB 6 Piece Site Kit
32 coMPressors
AIRCoMPRessoRs
High pressure output: 116psi (8 bar)
High power motorsuitable for DIY and trade applications
oil free for easymaintenance
Air receiver suitable foruse with most air toolsand accessories
6L Air Compressor
Item number Description Capacity
G04001JCB JCB 6L Air Compressor 6L
33
AIRCoMPRessoRs
coMPressors
High power motorsuitable for DIY and trade applications
High pressure output: 116psi (8 bar)
Large air receiver for continual use of air tools and accessories
oil lubricated for longerlife and optimumperformance.
24L Air Compressor
Item number Description Capacity
G04002JCB JCB 24L Air Compressor 24L
34 coMPressors
AIRCoMPRessoRs
50L Air Compressor
Item number Description Capacity
G04003JCB JCB 50L Air Compressor 50L
High power motorsuitable for DIY and trade applications
High pressure output: 116psi (8 bar)
Large air receiver for continual use of air tools and accessories
oil lubricated for longerlife and optimumperformance.
35
CoMPRessoRACCessoRIes
coMPressors
Air Blow gun
Coiled Air Hose
Air Blow Gun & Hose Kit
Air Tyre Inflator with gauge
safety Air Blow gun
Air Filter Regulator Combination
Item no. Description
G04005JCB JCB Air Blow Gun
G04006JCB JCB Coiled Air Hose
G04007JCB JCB Air Blow Gun & Hose Kit
Item no. Description
G04008JCB JCB Air Tyre Inflator with Gauge
G04009JCB JCB Safety Air Blow Gun
G04010JCB JCB Air Filter Regulator Combination
36
power toolaccessories
37
Independent testing has taken place within the UK, Russia and Asia.
Product Lifespan 6mm sDs Drill
We put all of the products through demanding tests to replicate trade usage. The trials were constructed to challenge both performance and life expectancy and in some cases test through to destruction so we could really understand the quality of the JCB power tool accessories.
This test was a 6mm sDs drill into 35mm deep reinforced concrete with aggregate. Tests were performed until drill bit would not cut into material.
LONGER
3x
Number of holes drilled500450400350300250200150100500
drilling Accessories
38
MULTI PURPoseDRILLIng
Multi Purpose Drill Bits
135o tip for easy starting
Precision ground for cleaner holes
suitable for masonry, wood, plastic and metal Available 3mm
to 10mm
Item no. Description
G02096JCB JCB Multi Purpose Drill 3x70mm
G02097JCB JCB Multi Purpose Drill 4x75mm
G02098JCB JCB Multi Purpose Drill 5x85mm
G02099JCB JCB Multi Purpose Drill 5.5x85mm
G02100JCB JCB Multi Purpose Drill 6x100mm
G02101JCB JCB Multi Purpose Drill 6x150mm
Item no. Description
G02102JCB JCB Multi Purpose Drill 6.5x100mm
G02103JCB JCB Multi Purpose Drill 7x100mm
G02104JCB JCB Multi Purpose Drill 8x120mm
G02105JCB JCB Multi Purpose Drill 10x120mm
G02106JCB JCB Multi Purpose Drill 12x150mm
G02107JCB JCB Multi Purpose Drill 4 Piece Set
drilling Accessories
39
MeTALDRILLIng
Up to 4 x longer life over standard HSS TiN drills
Tin coated for superior lubrication and ease of drilling
Unique TurboJet 7 edge tip for superior cutting
easy start tip
Fully ground precision flutes
JCB TurboJet 7 Point HSS Drill Bits
Item no. Description
G02334JCB JCB TurboJet 7 Point HSS Drill 2x49mm Pk3
G02335JCB JCB TurboJet 7 Point HSS Drill 2.5x57mm Pk3
G02336JCB JCB TurboJet 7 Point HSS Drill 3x61mm Pk3
G02337JCB JCB TurboJet 7 Point HSS Drill 3.5x65mm Pk3
G02338JCB JCB TurboJet 7 Point HSS Drill 4x70mm Pk3
G02339JCB JCB TurboJet 7 Point HSS Drill 4.5x80mm
G02340JCB JCB TurboJet 7 Point HSS Drill 5x86mm
G02341JCB JCB TurboJet 7 Point HSS Drill 5.5x93mm
G02342JCB JCB TurboJet 7 Point HSS Drill 6x93mm
G02343JCB JCB TurboJet 7 Point HSS Drill 6.5x101mm
Item no. Description
G02344JCB JCB TurboJet 7 Point HSS Drill 7x109mm
G02345JCB JCB TurboJet 7 Point HSS Drill 7.5x109mm
G02346JCB JCB TurboJet 7 Point HSS Drill 8x117mm
G02347JCB JCB TurboJet 7 Point HSS Drill 8.5x117mm
G02348JCB JCB TurboJet 7 Point HSS Drill 9x125mm
G02349JCB JCB TurboJet 7 Point HSS Drill 9.5x133mm
G02350JCB JCB TurboJet 7 Point HSS Drill 10x133mm
G02351JCB JCB TurboJet 7 Point HSS Drill 11x142mm
G02352JCB JCB TurboJet 7 Point HSS Drill 12x151mm
G02353JCB JCB TurboJet 7 Point HSS Drill 13x151mm
HSS-TiN JET POINT TIP
drilling Accessories
40
MeTALDRILLIng
HSS TiN Drill Bits
HSS-TiN
Item no. Description
G02054JCB JCB Precision Ground HSS TiN 2mm Pk3
G02055JCB JCB Precision Ground HSS TiN 2.5mm Pk3
G02056JCB JCB Precision Ground HSS TiN 3mm Pk3
G02057JCB JCB Precision Ground HSS TiN 3.5mm Pk3
G02058JCB JCB Precision Ground HSS TiN 4mm Pk3
G02059JCB JCB Precision Ground HSS TiN 4.5mm
G02060JCB JCB Precision Ground HSS TiN 5mm
G02061JCB JCB Precision Ground HSS TiN 5.5mm
G02062JCB JCB Precision Ground HSS TiN 6mm
G02063JCB JCB Precision Ground HSS TiN 6.5mm
G02064JCB JCB Precision Ground HSS TiN 7mm
G02065JCB JCB Precision Ground HSS TiN 7.5mm
Item no. Description
G02066JCB JCB Precision Ground HSS TiN 8mm
G02067JCB JCB Precision Ground HSS TiN 8.5mm
G02068JCB JCB Precision Ground HSS TiN 9mm
G02069JCB JCB Precision Ground HSS TiN 10mm
G02070JCB JCB Precision Ground HSS TiN 11mm
G02071JCB JCB Precision Ground HSS TiN 12mm
G02072JCB JCB Precision Ground HSS TiN 13mm
G02073JCB JCB Precision Ground HSS TiN 6pc Set
G02074JCB JCB Precision Ground HSS TiN 10pc Set
G02075JCB JCB Precision Ground HSS TiN 19pc Set
G02182JCB JCB 8X117mm HSS-TiN Preci Grd Drill Bit
G02183JCB JCB 8.5X117mm HSS-TiN Preci Grd Dr Bt
Titanium nitrate coating for smoother drilling into metal
Less friction for longer life
suitable for drilling into all metals
Available 5mm to 13mm
drilling Accessories
41
MeTALDRILLIng
HSS-CO
HSS Co Drill Bits
Cobalt coating for smoother drilling into hard metals
Designed for heavy duty drilling
Available 5mm to 13mm
Item no. Description
G02052JCB JCB Precision Ground HSS-Co 6Pc Set
G02053JCB JCB Precision Ground HSS-Co 10Pc Set
G02156JCB JCB HSS-Co Preci Grnd Drill Bit 2x49mm
G02157JCB JCB HSS-Co Preci Grd Drill Bit 2.5x57mm
G02158JCB JCB HSS-Co Preci Grnd Drill Bit 3x61mm
G02159JCB JCB HSS-Co Preci Grnd Drill Bit 3.2x65mm
G02160JCB JCB HSS-Co Preci Grd Drill Bit 3.5x65mm
G02161JCB JCB HSS-Co Preci Grnd Drill Bit 4x70mm
G02162JCB JCB HSS-Co Preci Grnd Drill Bit 4.2x75mm
G02163JCB JCB HSS-Co Preci Grd Drill Bit 4.5x80mm
G02164JCB JCB HSS-Co Preci Grd Drill Bit 4.8x80mm
G02165JCB JCB HSS-Co Preci Grd Drill Bit 5x86mm
G02166JCB JCB HSS-Co Preci Grd Drill Bit 5.5x93mm
G02167JCB JCB HSS-Co Preci Grnd Drill Bit 6x93mm
Item no. Description
G02168JCB JCB HSS-Co Preci Grnd Drill Bit 6.5x101mm
G02169JCB JCB HSS-Co Preci Grnd Drill Bit 7x109mm
G02170JCB JCB HSS-Co Preci Grnd Drill Bit 7.5x109mm
G02171JCB JCB HSS-Co Preci Grnd Drill Bit 8x117mm
G02172JCB JCB HSS-Co Preci Grnd Drill Bit 8.5x117mm
G02173JCB JCB HSS-Co Preci Grnd Drill Bit 9x125mm
G02174JCB JCB HSS-Co Preci Grnd Drill Bit 9.5x125mm
G02175JCB JCB HSS-Co Preci Grd Drill Bit 10x133mm
G02176JCB JCB HSS-Co Preci Grd Drill Bit 11x142mm
G02177JCB JCB HSS-Co Preci Grd Drill Bit 12x151mm
G02178JCB JCB HSS-Co Preci Grd Drill Bit 13x151mm
G02179JCB JCB HSS-Co Preci Grd Drill Bit 14x160mm
G02180JCB JCB HSS-Co Preci Grd Drill Bit 15x169mm
G02181JCB JCB HSS-Co Preci Grd Drill Bit 16x178mm
drilling Accessories
42
WOODDRILLIng
easy start tip
sharpened flute for fast cutting
Available 3mm to 10mm
Lip and spur Drill BitsEASY START TIP
Item no. Description
G02184JCB JCB Lip and Spur Wood Drill 3x61mm
G02185JCB JCB Lip and Spur Wood Drill 4x75mm
G02186JCB JCB Lip and Spur Wood Drill 5x86mm
G02187JCB JCB Lip and Spur Wood Drill 6x93mm
G02188JCB JCB Lip and Spur Wood Drill 7x109mm
Item no. Description
G02189JCB JCB Lip and Spur Wood Drill 8x117mm
G02190JCB JCB Lip and Spur Wood Drill 9x120mm
G02191JCB JCB Lip and Spur Wood Drill 10x133mm
G02192JCB JCB Lip and Spur Wood Drill 8Pc Set
drilling Accessories
43
WOODDRILLIng
Flutes designed to remove spoil quickly
Patented four flute drills for superior drilling performance and long life
Heavy duty shank designed for repetitive drilling
Available 16mm to 32mm
4 Flute Drill Bits
Item no. Description
G02038JCB JCB Speed Bit With 4 Flute Cutting 10mm
G02039JCB JCB Speed Bit With 4 Flute Cutting 13mm
G02040JCB JCB Speed Bit With 4 Flute Cutting 16mm
G02041JCB JCB Speed Bit With 4 Flute Cutting 19mm
G02042JCB JCB Speed Bit With 4 Flute Cutting 22mm
G02043JCB JCB Speed Bit With 4 Flute Cutting 25mm
Item no. Description
G02044JCB JCB Speed Bit With 4 Flute Cutting 28mm
G02045JCB JCB Speed Bit With 4 Flute Cutting 30mm
G02046JCB JCB Speed Bit With 4 Flute Cutting 32mm
G02047JCB JCB Speed Bit With 4 Flute Cutting 38mm
G02048JCB JCB Speed Bit With 4 Flute Cutting 6Set
drilling Accessories
44
WOODDRILLIng
Bi-Metal for superior cutting performance and longer life
Use with a hole saw arbour
suitable for drilling into wood, metal and plaster board
Bi-Metal Hole Saws
Downlighter Kit
• Complete hole saw kit suitable for wood and plasterboard
• Designed for fitting downlighters
• Includes common light fitting sizes
BI-METAL
BiM
Item no. Description
G02202JCB JCB Bi-Metal Holesaw 16mm
G02203JCB JCB Bi-Metal Holesaw 20mm
G02204JCB JCB Bi-Metal Holesaw 25mm
G02205JCB JCB Bi-Metal Holesaw 30mm
G02206JCB JCB Bi-Metal Holesaw 35mm
G02207JCB JCB Bi-Metal Holesaw 40mm
Item no. Description
G02208JCB JCB Bi-Metal Holesaw 45mm
G02209JCB JCB Bi-Metal Holesaw 55mm
G02210JCB JCB Bi-Metal Holesaw 62mm
G02211JCB JCB Bi-Metal Holesaw 70mm
G02050JCB JCB 5 Piece Downlighter Kit
drilling Accessories
45
WOODDRILLIng
Bi-metal holesaws for a clean cut
Adjustable jig to fit all door sizes
Door Lock Installation Kit
• Complete ready to use kit includes 2 hole saws, fitting jig and arbor
• Designed to ensure consistent and easy drilling of the right size holes for the installation of locks into wooden and metal doors
BI-METAL
BiM
Item Number Description Size
G02051JCB JCB Door Lock Installation Kit 25mm and 54mm
drilling Accessories
46
WETDRY technology up to 10x longer lifePremium Grade Diamonds• High grade exposed diamond for fast cutting
• Superior brazed bond matrix
• Tough alloy body• Easy start plunge cutting for working in the tightest of locations without the need for guiding
• Low torque prolonging battery life of cordless power units
Suitable for:
• Porcelain • Glass• Ceramic • Drywall / Stucco• Granite • Fibre Cement Board• Marble • House Brick• Travertine • Cement Block• Slate • Fibreglass
*No. of 6.5mm holes drilled into grade 5 Porcelain at 1,500 RPM using wetdry method
Can be used at very high speeds fitted to an angle grinder power unit with the JCB C4 adaptor*
Can be used at low speeds fitted to a standard arbor and drill with the JCB AutoPilot for accurate piloting*
Multi-power tool capability
*Angle grinder attachment suitable for 35 - 76mm Pro Hole Saws, AutoPilot suitable for 19-76mm Pro Hole Saws
Product ranges:
• Delivers the higest performance on the most difficult of materials
• Cuts where no other blade will, quicker and for longer
• Blades are extremely robust with minimal diamond loss or dulling
Diamond Jigsaw & Reciprocating Saw Blades
47
WETDRY technology up to 10x longer lifePremium Grade Diamonds• High grade exposed diamond for fast cutting
• Superior brazed bond matrix
• Tough alloy body• Easy start plunge cutting for working in the tightest of locations without the need for guiding
• Low torque prolonging battery life of cordless power units
Suitable for:
• Porcelain • Glass• Ceramic • Drywall / Stucco• Granite • Fibre Cement Board• Marble • House Brick• Travertine • Cement Block• Slate • Fibreglass
*No. of 6.5mm holes drilled into grade 5 Porcelain at 1,500 RPM using wetdry method
Can be used at very high speeds fitted to an angle grinder power unit with the JCB C4 adaptor*
Can be used at low speeds fitted to a standard arbor and drill with the JCB AutoPilot for accurate piloting*
Multi-power tool capability
*Angle grinder attachment suitable for 35 - 76mm Pro Hole Saws, AutoPilot suitable for 19-76mm Pro Hole Saws
Product ranges:
• Delivers the higest performance on the most difficult of materials
• Cuts where no other blade will, quicker and for longer
• Blades are extremely robust with minimal diamond loss or dulling
Diamond Jigsaw & Reciprocating Saw Blades
page 48
page 63page 62
page 48
p 59
page 53
page 55
48
gLAss & TILeDRILLIng
Reduced vibration to reduce chance of breakage
Four flute technology and design to provide fast and easy drilling into glass and tile surfaces
Available 5mm to 10mm
Hex fitting
glass & Tile Drill Bits
Vacuum Brazed Hole Saws
superior drilling performance into glass and tiles
Diamonds are vacuum brazed for longer life
Item no. Description
G02148JCB JCB Tile And Glass Drill 4 Flute 5mm
G02149JCB JCB Tile And Glass Drill 4 Flute 6mm
G02150JCB JCB Tile And Glass Drill 4 Flute 8mm
G02151JCB JCB Tile And Glass Drill 4 Flute 10mm
G02152JCB JCB Tile And Glass Drill 5,6,8mm
G02193JCB JCB Vacuum Brazed Tile Hole Saw 6mm
G02194JCB JCB Vacuum Brazed Tile Hole Saw 6.5mm
G02195JCB JCB Vacuum Brazed Tile Hole Saw 8mm
Item no. Description
G02196JCB JCB Vacuum Brazed Tile Hole Saw 10mm
G02197JCB JCB Vacuum Brazed Tile Hole Saw 12mm
G02198JCB JCB Vacuum Brazed Tile Hole Saw 15mm
G02199JCB JCB Vacuum Brazed Tile Hole Saw 17mm
G02200JCB JCB Vacuum Brazed Tile Hole Saw 25mm
G02201JCB JCB Vacuum Brazed Tile Hole Saw 38mm
G02049JCB JCB Tile Diamond Holesaw Jig
drilling Accessories
49
MAsonRYDRILLIng
135o tip for easy starting
Tips are vacuum brazed for superior performance
Carbide tips and heat treated flutes for longer life and exceptional drilling performance
Available 5mm to 16mm
Masonry Drill Bits
LONGER
3x
Item no. Description
G02076JCB JCB Masonry Drill 3x85mm
G02077JCB JCB Masonry Drill 4x85mm
G02078JCB JCB Masonry Drill 5x85mm
G02079JCB JCB Masonry Drill 5.5x100mm
G02080JCB JCB Masonry Drill 5.5x110mm
G02081JCB JCB Masonry Drill 5.5x150mm
G02082JCB JCB Masonry Drill 6x100mm
G02083JCB JCB Masonry Drill 6x150mm
G02084JCB JCB Masonry Drill 6.5x100mm
G02085JCB JCB Masonry Drill 7x100mm
Item no. Description
G02086JCB JCB Masonry Drill 7x150mm
G02087JCB JCB Masonry Drill 8x150mm
G02088JCB JCB Masonry Drill 10x150mm
G02089JCB JCB Masonry Drill 12x150mm
G02090JCB JCB Masonry Drill 14x150mm
G02091JCB JCB Masonry Drill 16x150mm
G02092JCB JCB Hard Surface Masonry Drill 5pc Set
G02093JCB JCB Masonry Drill 5.5x150mm Pk10
G02094JCB JCB Masonry Drill 6x150mm Pk10
G02095JCB JCB Masonry Drill 7x150mm Pk10
Ceratizit tip
drilling Accessories
50 drilling Accessories
sDsDRILLIng
sDs fitting
40 CR high grade steel, heat treated for longer life
sand blasted and precision ground flutes
Ceratizit cross point tip
Capable of cutting into denser building materials
easier, smoother drilling
sDs Cross Tip Drill Bits
CROSS TIPLONGER
5x
Item no. Description
G02354JCB JCB SDS Cross Tip Drill 5x110mm
G02355JCB JCB SDS Cross Tip Drill 5.5x110mm
G02356JCB JCB SDS Cross Tip Drill 6x110mm
G02357JCB JCB SDS Cross Tip Drill 6.5x110mm
G02358JCB JCB SDS Cross Tip Drill 7x110mm
G02359JCB JCB SDS Cross Tip Drill 8x110mm
G02360JCB JCB SDS Cross Tip Drill 10x110mm
G02361JCB JCB SDS Cross Tip Drill 5x160mm
G02362JCB JCB SDS Cross Tip Drill 5.5x160mm
G02363JCB JCB SDS Cross Tip Drill 6x160mm
G02364JCB JCB SDS Cross Tip Drill 6.5x160mm
G02365JCB JCB SDS Cross Tip Drill 7x160mm
G02366JCB JCB SDS Cross Tip Drill 8x160mm
G02367JCB JCB SDS Cross Tip Drill 10x160mm
G02368JCB JCB SDS Cross Tip Drill 12x160mm
G02369JCB JCB SDS Cross Tip Drill 6x210mm
G02370JCB JCB SDS Cross Tip Drill 8x210mm
G02371JCB JCB SDS Cross Tip Drill 10x210mm
Item no. Description
G02372JCB JCB SDS Cross Tip Drill 12x210mm
G02373JCB JCB SDS Cross Tip Drill 14x210mm
G02374JCB JCB SDS Cross Tip Drill 16x210mm
G02375JCB JCB SDS Cross Tip Drill 6.5x260mm
G02376JCB JCB SDS Cross Tip Drill 8x260mm
G02377JCB JCB SDS Cross Tip Drill 10x260mm
G02378JCB JCB SDS Cross Tip Drill 12x260mm
G02379JCB JCB SDS Cross Tip Drill 14x260mm
G02380JCB JCB SDS Cross Tip Drill 16x260mm
G02381JCB JCB SDS Cross Tip Drill 12x310mm
G02382JCB JCB SDS Cross Tip Drill 10x350mm
G02383JCB JCB SDS Cross Tip Drill 12x350mm
G02384JCB JCB SDS Cross Tip Drill 14x350mm
G02385JCB JCB SDS Cross Tip Drill 16x350mm
G02386JCB JCB SDS Cross Tip Drill 12x450mm
G02387JCB JCB SDS Cross Tip Drill 14x450mm
G02388JCB JCB SDS Cross Tip Drill 16x450mm
51drilling Accessories
sDsDRILLIng
Tips are vacuum brazed for superior performance
sDs fitting for sDs drills
Carbide tips and heat treated flutes for longer life and exceptional drilling performance
Available 5mm to 14mm
sDs Masonry Drill Bits
LONGER
3x
Item no. Description
G02108JCB JCB SDS Hard Rock Drill 4x110mm
G02109JCB JCB SDS Hard Rock Drill 5x110mm
G02110JCB JCB SDS Hard Rock Drill 5x160mm
G02111JCB JCB SDS Hard Rock Drill 5.5x160mm
G02112JCB JCB SDS Hard Rock Drill 6x110mm
G02113JCB JCB SDS Hard Rock Drill 6x160mm
G02114JCB JCB SDS Hard Rock Drill 6x210mm
G02115JCB JCB SDS Hard Rock Drill 6x310mm
G02116JCB JCB SDS Hard Rock Drill 7x160mm
G02117JCB JCB SDS Hard Rock Drill 7x210mm
G02118JCB JCB SDS Hard Rock Drill 8x110mm
G02119JCB JCB SDS Hard Rock Drill 8x160Mm
G02120JCB JCB SDS Hard Rock Drill 8x210mm
G02121JCB JCB SDS Hard Rock Drill 8x310mm
G02122JCB JCB SDS Hard Rock Drill 8x450mm
G02123JCB JCB SDS Hard Rock Drill 10x160mm
G02124JCB JCB SDS Hard Rock Drill 10x450mm
G02125JCB JCB SDS Hard Rock Drill 10x310mm
G02126JCB JCB SDS Hard Rock Drill 10x210mm
G02127JCB JCB SDS Hard Rock Drill 10x160mm
Item no. Description
G02128JCB JCB SDS Hard Rock Drill 10x110mm
G02129JCB JCB SDS Hard Rock Drill 12x160mm
G02130JCB JCB SDS Hard Rock Drill 12x210mm
G02131JCB JCB SDS Hard Rock Drill 12x310mm
G02132JCB JCB SDS Hard Rock Drill 12x450mm
G02133JCB JCB SDS Hard Rock Drill 14x160mm
G02134JCB JCB SDS Hard Rock Drill 14x210mm
G02135JCB JCB SDS Hard Rock Drill 14x260mm
G02136JCB JCB SDS Hard Rock Drill 14x310mm
G02137JCB JCB SDS Hard Rock Drill 16x210mm
G02138JCB JCB SDS Hard Rock Drill 16x310mm
G02139JCB JCB SDS Hard Rock Drill 16x450mm
G02140JCB JCB SDS Hard Rock Drill 18x210mm
G02141JCB JCB SDS Hard Rock Drill 18x310mm
G02142JCB JCB SDS Hard Rock Drill 20x310mm
G02143JCB JCB 8pc SDS Hard Rock Drill Bit Set
G02144JCB JCB SDS Hard Rock Drill 5.5x160mm Pk5
G02145JCB JCB SDS Hard Rock Drill 6x160mm Pk5
G02146JCB JCB SDS Hard Rock Drill 7x160mm Pk5
G02147JCB JCB SDS Hard Rock Drill 8x160mm Pk5
Ceratizit tip
52 drilling Accessories
sDsDRILLIng
sDs Chisels
LONGER
3x
Item no. Description
G02153JCB 250mm SDS Pointed Chisel
G02154JCB 20x250mm SDS Flat Chisel
G02155JCB 40x250mm SDS Cutting Chisel
Item no. Description
G02322JCB 80mm SDS Magnetic Bit Holder
G02323JCB 1/2” SDS Adaptor
G02324JCB 8x70mm Drift Key
sDs Plus fitting
sand blasted tipCapable of cutting into denser building materials
53drilling Accessories
sDsDRILLIng
Diamond Core Drill Kit
LONG LIFE FAST CUTTING
8mmSEGMENT HEIGHT UNIVERSAL FIT
1/2"
Item Number Description Size
G02389JCB JCB Diamond Core Drill Kit Mixed
Contents:• 42mm, 52mm, 65mm, 117mm
& 127mm• Chuck Adaptor• sDs Adaptor• extension Rod• guide Rod• Drift Key & 350mm Long
Masonry Bit
8mm segment height for longer life and faster drilling
Diamond segments for longer life and higher performance
Fast cut diamond segments for faster and smoother drilling than a standard core drill
Universal fit with a 1/2” bore
54
55
SCREWDRIVERBITs
Diamond Tip screwdriver Bits
Anit-slip diamond tip
High grade steel
PZ1, PZ2, PZ3, PH2 sizes available
drilling Accessories
Item number Description Pack Quantity
G02301JCB JCB 25mm Diamond Tip Screwdriver Bits PH2 3
G02302JCB JCB 25mm Diamond Tip Screwdriver Bits Pz1 3
G02303JCB JCB 25mm Diamond Tip Screwdriver Bits Pz2 3
G02304JCB JCB 25mm Diamond Tip Screwdriver Bits Pz3 3
G02305JCB JCB 25mm Diamond Tip Screwdriver Bits PH2 15
G02306JCB JCB 25mm Diamond Tip Screwdriver Bits Pz2 15
56 drilling Accessories
IMPACTBITs
PZ1, PZ2, PZ3, PH1, PH2, PH3 sizes available
Torsion technology to reduce breakage and optimise initial grip in the screw head
Impact screwdriver Bits
Item no. Description
G02312JCB JCB Torsion Impact Screwdriver Bits PH1 Pk3
G02313JCB JCB Torsion Impact Screwdriver Bits PH2 Pk3
G02314JCB JCB Torsion Impact Screwdriver Bits PH3 Pk3
G02315JCB JCB Torsion Impact Screwdriver Bits Pz1 Pk3
G02316JCB JCB Torsion Impact Screwdriver Bits Pz2 Pk3
G02317JCB JCB Torsion Impact Screwdriver Bits Pz3 Pk3
Item no. Description
G02318JCB JCB Torsion Impact Screwdriver Bits PH2 Pk15
G02319JCB JCB Torsion Impact Screwdriver Bits Pz2 Pk15
G02320JCB 65mm Ph2 Double Ended Torsion Bit Pk2
G02321JCB 65mm Pz2 Double Ended Torsion Bit Pk2
G02307JCB JCB Impact Torx Bits 8Pc Set
57
IMPACTBITs
drilling Accessories
High quality sockets for use with impact tools
Thicker sockets walls to withstand the torque for a longer life
3/8” drive
Set of 3 - 8mm, 10mm, 13mm
For use with impact sockets
3/8” Drive
Impact sockets
Impact socket Adaptor
Impact Bit Holder
For use with bits
Quick change
SQUARE
3 8
QUICK CHANGE
Item Number Description Size
G02309JCB JCB Impact Socket 3Pc Set 8,10,13mm
G02308JCB JCB Impact Bit Holder 70mm
G02310JCB JCB Impact Socket Adaptor 3/8”
58
59
suitable for general purpose cutting such as building materials, bricks, block paving, tiles & lintels
suitable for general purpose building materials, hard concrete products, block paving, bricks & tiles
suitable for porcelain, ceramic, marble, terracotta, granite, slate & steel coated tiles
DIAMonDBLADes
segmented Diamond Blades
Turbo Diamond Blades
Continuous Rim Diamond Blades
Item no. Description
G02016JCB JCB Continuous Rim Diamond Blade 80mm
G02017JCB JCB Continuous Rim Diamond Blade 110mm
G02018JCB JCB Continuous Rim Diamond Blade 115mm
G02031JCB JCB Continuous Rim Diamond Blade 125mm
G02019JCB JCB Continuous Rim Diamond Blade 150mm
G02020JCB JCB Continuous Rim Diamond Blade 180mm
Item no. Description
G02021JCB JCB Segmented Diamond Blade 115mm
G02030JCB JCB Segmented Diamond Blade 125mm
G02022JCB JCB Segmented Diamond Blade 230mm
G02023JCB JCB Segmented Diamond Blade 300mm
G02024JCB JCB Segmented Diamond Blade 350mm
Item no. Description
G02025JCB JCB Turbo Diamond Blade 115mm
G02026JCB JCB Turbo Diamond Blade 230mm
G02027JCB JCB Turbo Diamond Blade 300mm
G02028JCB JCB Turbo Diamond Blade 350mm
G02029JCB JCB Turbo Diamond Blade 125mm
cUtting Accessories
60 cUtting Accessories
CUTTIng &gRInDIng
Metal grinding
Metal Cutting
stainless steel Cutting
Masonry Cutting
Item no. Description
G02002JCB JCB Metal Cutting Discs 115x2.5x22 Pk5
G02007JCB JCB Metal Cutting Discs 125x2.5x22 Pk5
G02011JCB JCB Metal Cutting Discs 230x3.0x22 Pk5
Item no. Description
G02003JCB JCB Stone Cutting Discs 115x2.5x22 Pk5
G02008JCB JCB Stone Cutting Discs 125x2.5x22 Pk5
G02013JCB JCB Stone Cutting Discs 230x3.0x22 Pk5
Item no. Description
G02034JCB JCB Metal Grinding Discs 115x6.0x22 Pk5
G02035JCB JCB Metal Grinding Discs 125x6.0x22 Pk5
G02037JCB JCB Metal Grinding Discs 230x6.0x22 Pk5
Item no. Description
G02006JCB JCB St Steel Cut Discs 115x1.0x22 Pk5
G02009JCB JCB St Steel Cut Discs 125x1.2x22 Pk5
G02015JCB JCB St Steel Cut Discs 230x2.0x22 Pk5
61
TCTBLADes
Unique tooth design & construction for superior clean cutting
Multipurpose blade is suitable for cutting of wood, wood with nails, metal & plastic
cUtting Accessories
TCT Blades
Wood & Multipurpose
Item no. Description
G02280JCB JCB Wood TCT Blade 184x2.4xt28
G02281JCB JCB Wood TCT Blade 190x2.4xt28
G02282JCB JCB Wood TCT Blade 210x2.6xt32
G02283JCB JCB Wood TCT Blade 230x3.0xt36
G02284JCB JCB Wood TCT Blade 250x3.0xt36
G02290JCB JCB Wood TCT Blade 160x20/16 Teeth 24
G02291JCB JCB Wood TCT blade 160x20/16 Teeth 36
G02292JCB JCB Wood TCT blade 165x20/16 Teeth 18
G02293JCB JCB Wood TCT blade 165x20/16 Teeth 36
G02294JCB JCB Wood TCT blade 180x30/20/16 Teeth 24
G02295JCB JCB Wood TCT blade 180x30/20/16 Teeth 42
G02296JCB JCB Wood TCT Blade 184x30/20/16 Teeth 24
G02297JCB JCB Wood TCT Blade 184x30/20/16 Teeth 40
G02298JCB JCB Wood TCT Blade 190x30/20/16 Teeth 24
G02299JCB JCB Wood TCT Blade 200x30/20/16 Teeth 32
G02300JCB JCB Wood TCT Blade 210x30/20/16 Teeth 32
Item no. Description
G02276JCB JCB Multipurpose TCT Blade 210x2.4x30 z32
G02277JCB JCB Multipurpose TCT Blade 210x2.4x30 z48
G02278JCB JCB Multipurpose TCT Blade 254x2.4x30 z36
G02279JCB JCB Multipurpose TCT Blade 254x2.4x30 z80
G02285JCB JCB Multi TCT Blade 160x20/16 Teeth 36
G02286JCB JCB Multi TCT Blade 184x30/20/16 Teeth 40
G02287JCB JCB Multi TCT Blade 190x30/20/16 Teeth 24
G02288JCB JCB Multi TCT Blade 210x30/20/16 Teeth 32
G02289JCB JCB Multi TCT Blade 216x30/20/16 Teeth 40
62
JIGSAWBLADes
cUtting Accessories
HCS Blades
T-shank fittings
Range includes fine, medium and coarse cut blades
Jigsaw Blades
Item no. Description
G02240JCB JCB T Shank Jigsaw Blade Wd Str Cut 75mm 5Pk
G02241JCB JCB T Shank Jigsaw Blade Wd Fst Cut 75mm 5Pk
G02242JCB JCB T Shank Jigsaw Blade Lam 75mm 5Pk
G02243JCB JCB T Shank Jigsaw Blade Lam Dwn Cut 75mm 5Pk
G02244JCB JCB T Shank Jigsaw Blade 1-3mm Metal 5Pk
G02245JCB JCB T Shank Jigsaw Blade 3-6mm Metal 5Pk
G02246JCB JCB T Shank Jigsaw Blade Wd/Plas 100x1.2x12T 2Pk
G02247JCB JCB T Shank Jigsaw Blade Wd/Plas 100x1.3x10T 2Pk
G02248JCB JCB T Shank Jigsaw Blade Wd/Plas 75x1.0x24T 2Pk
G02249JCB JCB T Shank Jigsaw Blade Wd/Plas 100x1.2x6T 2Pk
G02250JCB JCB T Shank Jigsaw Blade Wd/Plas 100x1.5x10T 2Pk
Item no. Description
G02251JCB JCB T Shank Jigsaw Blade Wd/Plas 100x1.2x10T 2Pk
G02252JCB JCB T Shank Jigsaw Blade Wd/Plas 100x1.2x8T 2Pk
G02253JCB JCB T Shank Jigsaw Blade Wd/Plas 100x1.5x6T 2Pk
G02254JCB JCB T Shank Jigsaw Blade Metal 75x1.0x21T 2Pk
G02255JCB JCB T Shank Jigsaw Blade Metal 75x1.0x32T 2Pk
G02256JCB JCB T Shank Jigsaw Blade Ceramic 75x1.0X30G
G02257JCB JCB U Shank Jigsaw Blade Wd/Plas 100x1.3x10T 2Pk
G02258JCB JCB U Shank Jigsaw Blade Wd/Plas 100x1.2x6T 2Pk
G02259JCB JCB U Shank Jigsaw Blade Metal 75x1.0x21T 2Pk
G02260JCB JCB U Shank Jigsaw Blade Metal 75x1.3x18T 2Pk
G02261JCB JCB U Shank Jigsaw Blade Ceramic 75x1.0x30G
63
Bi-Metal blades for sharper cutting Universal fitting shank
Range includes fine, medium and coarse cut blades
suitable for wood and metal
Reciprocating saw Blades
ReCIPRoCATIngSAW BLADES
Item no. Description
G02262JCB JCB BiM Recip Blade 1-3mm Metal Fine Cut 2Pk
G02263JCB JCB HSS Recip Blade 2-8mm Metal Fine Cut 2Pk
G02264JCB JCB HSS Recip Blade 1-3mm Metal Fine Cut 2Pk
G02265JCB JCB BiM Recip Blade 2-12mm Metal Fine Cut 2Pk
G02266JCB JCB BiM Recip Blade 2-75mm Wd/Mtl Fine Cut 2Pk
G02267JCB JCB BiM Recip Blade Wd/Plas 150x0.9x10T 2Pk
G02268JCB JCB Recip Blade Wd/Plas Fst Cut 230x1.2x7T 2Pk
Item no. Description
G02269JCB JCB Recip Blade Wd/Plas Str Cut 230x1.2x10T 2Pk
G02270JCB JCB Recip Blade Wd/Plas 240x1.3x3T 2Pk
G02271JCB JCB Recip Blade Wd/Plas 225x1.27x6T 2Pk
G02272JCB JCB HSS Recip Blade Metal 150x0.9x24T 2Pk
G02273JCB JCB HSS Recip Blade Metal 150x0.9x14T 2Pk
G02274JCB JCB HSS Recip Blade Metal 150x0.9x24T 2Pk
G02275JCB JCB BiM Recip Blade Wd/Metal 225x0.9x10T 2Pk
cUtting Accessories
64 cUtting Accessories
RoUTIngBITs
Routing Bits
sharp TCT blades for precision & clean cutting
1/4” and 1/2” sizes available
Most shapes & finishes available in the range
½" ¼"
Item no. Description
G02213JCB JCB Straight Router Bit 12.7x50mm 1/2”
G02214JCB JCB Straight Router Bit 12.7x50mm Pk5
G02215JCB JCB Straight Router Bit 10x25.4mm 1/4”
G02216JCB JCB Straight Router Bit 6.3x25.4mm 1/4”
G02217JCB JCB Guided T Router Bit 12.7x25.4mm 1/4”
G02218JCB JCB Straight Router Bit 12.7x25.4mm1/4”
G02219JCB JCB Straight Router Bit 19.1x25.4mm1/4”
G02220JCB JCB 6Pc 1/4” Router Bit Set
Item no. Description
G02221JCB JCB 4Pc Brg Bisc Jntr Rter 0/10/20 1/4”
G02222JCB JCB Straight Router Bit 15.9x25.4mm1/4”
G02223JCB JCB Straight Router Bit 3.2x9.5mm 1/4”
G02224JCB JCB Guided Router Bit 12.7x25.4mm 1/4”
G02225JCB JCB 35mm Hinge Router Bit
G02226JCB JCB 4Pc Kitchen Fitters Pack 1/2”
G02227JCB JCB 6Pc 1/2” Router Bit Set
65
RoUTIngACCessoRIes
cUtting Accessories
Universal sub base Biscuits
Worktop jig
Worktop panel connectors
Routing Accessories
Item no. Description
G02228JCB JCB Wood Biscuits Fsc No 20 Pk100
G02231JCB JCB Wood Biscuits Fsc No 10 Pk100
G02234JCB JCB Wood Biscuits Fsc No 0 Pk100
G02229JCB JCB Worktop Connector Bolt 150mm Pk10
Item no. Description
G02230JCB JCB Guide Bush 30mm
G02232JCB JCB 600mm Worktop Jig
G02233JCB JCB Universal Sub Base 30mm
66
semi Circle Cut Multi Tool Blade
end Cut Multi Tool Blade
High grade steel
High grade steel
suitable for cutting wood, laminates, plasterboard and PVC
suitable for cutting wood, laminates, plasterboard and PVC
Universal fit
Universal fit
cUtting Accessories
MULTI-TooLBLADes
Item number Description
G02395JCB Semi Circle Cut Multi-Tool Blade 5 Pack
G02394JCB End Cut Multi-Tool Blade 5 Pack
67sAnding Accessories
MESHsAnDIng
Mesh sanding sheets
Universal fit - Fits with all power tool sanders, cut to size/shape as required
Patented design
Washable
Reduced clogging
Unique aluminium oxide construction for a finer scratch pattern resulting in a better surface finish & longer product life
Hook & Loop backing for easy use & fitting
Reduced dust for cleaner sanding
RE-USABLE
Item no. Description
G02235JCB JCB Mesh Sanding Sheet 40Grit Pk2
G02236JCB JCB Mesh Sanding Sheet 80Grit Pk2
G02237JCB JCB Mesh Sanding Sheet 120Grit Pk2
G02238JCB JCB Mesh Sanding Sheet 240Grit Pk2
G02239JCB JCB Mixed Sanding Sheets Pk4
Item no. Description
G02390JCB JCB 3m Mesh Sanding Roll 80Grit
G02391JCB JCB 3m Mesh Sanding Roll 120Grit
G02392JCB JCB 3m Mesh Sanding Roll 180Grit
G02393JCB JCB 3m Mesh Sanding Roll 240Grit
68 Accessory sets
MIxeDseTs
JCB 40pcs Combination Drill and Bit set
JCB 55pcs Combination Drill and Bit set
• 5pc HSS, Drill bits: 2, 3, 3.5, 4, 5mm• 5pc Masonry drill bit, 40Cr+YG8, milled, sandblast,
size: 4, 5, 6, 7, 8mm • 5pc Wood drill bits: 4, 5, 6, 7, 8 mm • 19pc 25mm Screwdriver bits• 1pc Countersink• 1pc 60mm Magnetic bit holder• 3pc nut sockets: 7, 8, 10mm• 1pc nut socket adaptor
• 11pc HSS, Drill bits: 1.5,2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5mm
• 6pc Masonry drill bits: 4, 5, 6, 7, 8, 10 mm • 6pc Wood drill bits: 4, 5, 6, 7, 8, 10 mm• 2pc Flat wood drill bits: 13,16x150mm • 1pc Countersink• 1pc 60mm Magnetic bit holder• 3pc nut sockets 7,8,10mm• 1pc nut socket adaptor• 18pc 25mm Screwdriver bits• 1pc drill diameter gauge • 5pc 50mm Screwdriver bits
Item Number Description Size
G02396JCB JCB 40Pc Mixed Set Mixed
G02397JCB JCB 55Pc Mixed Set Mixed
69
MIxeDseTs
Accessory sets
JCB 61pcs Combination Drill and Bit set with LeD Torch
JCB 69pcs Combination Drill and Bit Set with LED Torch
• 11pc HSS, Drill bits: 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5mm
• 6pc Masonry drill bits: 4, 5, 6, 7, 8, 10mm• 6pc Wood drill bits: 4, 5, 6, 7, 8, 10mm • 1pc Countersink• 1pc 60mm Magnetic bit holder• 14pc 50mm Screwdriver bits• 18pc 25mm Screwdriver bits w/plastic bits holder• 3pc nut sockets: 6, 8, 10mm• 1pc 3 LED Flashlight with telescopic magnetic
pick up
• 11pc HSS, Drill bits:1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5mm
• 6pc Masonry drill bits: 4, 5, 6, 7, 8, 10mm• 6pc Wood drill bits: 4, 5, 6, 7, 8, 10mm • 1pc Countersink, Cr-V, sand blast• 1pc 60mm Magnetic bit holder• 14pc 50mm Screwdriver bits• 26pc 25mm Screwdriver bits, w/plastic bits holder• 3pc nut sockets: 6, 8, 10mm• 1pc Head light
Item Number Description Size
G02398JCB JCB 61Pc Mixed Set Mixed
G02399JCB JCB 66Pc Mixed Set Mixed
70
handtools
71
CUTTIngTooLs
cUtting tools
STEEL -FINE
11TPI
STEEL -
Panel saw
Toolbox saw
soft grip for comfort and control
soft grip for comfort and control
45° and 90° cutting angle guide
45° and 90° cutting angle guide
Improved tooth technology for faster cleaner cut
Improved tooth technology for faster cleaner cut
super-high frequency teeth treatment for smoother and cleaner cut
super-high frequency teeth treatment for smoother and cleaner cut
Triple-ground teeth with innovative grinding technology
Triple-ground teeth with innovative grinding technology
sK5 blade, 1.0mm thick polished blade for reduced judder
SK5 blade, 11TPI, 0.85mm thick polished blade for reduced judder
Item Number Description Size
G03090JCB JCB Panel Saw 7TPI 550mm/22”
G03090JCB JCB Panel Saw 9TPI 550mm/22”
G03089JCB JCB Toolbox Saw 11TPI 375mm/15”
72 cUtting tools
Tenon saw soft grip for comfort and control
90° cutting angle guide
Double-ground teeth with innovative grinding technology
super-high frequency teeth treatment for smoother and cleaner cut
SK5 blade, 12TPI, 0.7mm thick polished blade for reduced judder
Drywall saw soft grip for comfort and control
Ideal for cutting plasterboard
Double edged blade
Hardened triple-ground teeth cut on the push and pull stroke for increased efficiency
65Mn steel blade
STEEL -FINE
12TPI
65MnTRIPLE-GROUND
TEETH
Item Number Description Size
G03091JCB JCB Tenon Saw 11TPI 300mm/12”
G03093JCB JCB Dry Wall Saw 152mm/6”
CUTTIngTooLs
73cUtting tools
Suitable for:• Timber• Plastic• PVC• Plasterboard
Heavy Duty 2 Piece Hack Saw
soft grip for comfort and control
2 in 1 Function - 6” Jab saw stored in hacksaw handle/frame
Bi-metal blade reduces risk of blade shattering
Fine cut for a smooth finish
Quick blade change mechanism
BI-METAL BLADE 2 IN 1
Item Number Description Size
G03092JCB JCB Heavy Duty 2 Piece Hacksaw 300mm
CUTTIngTooLs
74 cUtting tools
Item Number Description Size
G03092JCB JCB Heavy Duty 2 Piece Hacksaw 300mm
CUTTIngTooLs
Item Number Description Size
G03084JCB JCB Aviation Tin Snip Left Cut 250mm
G03085JCB JCB Aviation Tin Snip Right Cut 250mm
G03086JCB JCB Aviation Tin Snip Straight Cut 250mm
G03087JCB JCB 3 Piece Aviation Tin Snips Set 250mm ea.
Aviation Tin snips
Available in:• Left cut• Right cut• Straight cut• 3 piece set - left,
right and straight cut
CR-V steel for strength and durability
one-handed release mechanism
soft grip for comfort and control
Hardened serrated cutting edge for controlled cutting
Cuts metal sheets up to 1.2mm thick and stainless steel sheets up to 0.7mm thick
STEEL
75cUtting tools
CUTTIngTooLs
Item Number Description Size
G03088JCB JCB Heavy Duty Bolt Cutter 600mm
STEEL HEAD JAWCAPACITY
20mmHeavy Duty Bolt Cutters
Durable CR-Mo steel head
soft grip handle for comfort and control
20mm jaw capacity
76
Heavy Duty Fixed Blade Knife
Contents:• Fixed blade knife• 3pc SK5 blades
Heavy Duty Retractable Knife
Contents:• Retractable knife• 3pc SK5 blades Aluminium alloy
construction
Aluminium alloy construction
Quick blade change mechanism
In-handle blade storage
In-handle blade storage
Twist open button for positioning and changing blade
Includes 3 sK5 Blades
Includes 3 sK5 Blades
QUICK BLADE CHANGE MECHANISM
IN-HANDLE BLADE STORAGESTEEL
x3 BLADES
INCLUDED
STEEL
x3 BLADES
INCLUDEDIN-HANDLE
BLADE STORAGE
Item Number Description Size
G03050JCB JCB Retractable Knife One Size
G03053JCB JCB Heavy Duty Aluminium Fixed Blade Knife One Size
cUtting tools
CUTTIngTooLs
77cUtting tools
CUTTIngTooLs
Heavy Duty Lockback Knife
Contents:• Lockback knife• 5pc SK5 blade• Includes canvas
storage pouch
Contents:• Folding combo
utlity knife• 5pc SK5 blade• Includes canvas
storage pouch
Quick blade change mechanism
Quick blade change mechanism
In-handle blade storage
Thumb pad for cutting with added pressure
one-handed release mechanism
Twin blade - stainless steel blade
Aluminium alloy construction
Aluminium alloy construction
x5 BLADES
INCLUDED THUMB PAD
x5 BLADES
INCLUDED QUICK RELEASE ONE-HANDED RELEASE MECHANISM
LOCKING MECHANISM
Item Number Description Size
G03051JCB JCB Heavy Duty Lockback Knife inc Pouch & Blades One Size
G03052JCB JCB Heavy Duty Folding Combo Utility Knife inc Pouch & Blades One Size
Heavy Duty Folding Combo Utility Knife
78
Heavy Duty Snap Off Knife
Dual blade position
safety button locks blade in place
end cap blade snapper
Aluminium knife body
soft grip for comfort and control
x1 BLADES
INCLUDED SAFETY BUTTONEND CAPBLADE SNAPPER
Item Number Description Size
G03054JCB JCB Heavy Duty Snap Off Knife 25mm
cUtting tools
CUTTIngTooLs
79
Heavy Duty Knife Blades
Available in:• 5pc• 20pc• 50pc
Durable sK5 blades
Durable sK5 blades
Universal fit
Universal fit
Blade dispenser
Blade dispenser
Heavy Duty Snap Off Blades
• 25mm
STEEL
STEEL
Item Number Description Size
G03055JCB JCB Heavy Duty Knife Blades 5pc One Size
G03056JCB JCB Heavy Duty Knife Blades 20pc One Size
G03057JCB JCB Heavy Duty Knife Blades 50pc One Size
G03059JCB JCB HD Snap Off Blades 5PK 25mm
cUtting tools
CUTTIngTooLs
80
screwdrivers
Magnetic tips2 blade for durability
Hex bolt for increased torque(on larger screwdriver sizes)
soft grip for comfort and control
Item Number Description Size
G03097JCB JCB Screwdriver PH 0x75mm
G03098JCB JCB Screwdriver PH 1x100mm
G03099JCB JCB Screwdriver PH 2x125mm
G03100JCB JCB Screwdriver PH 2x200mm
G03101JCB JCB Screwdriver PH 3x150mm
G03102JCB JCB Screwdriver Pz 0x75mm
G03103JCB JCB Screwdriver Pz 1x100mm
G03104JCB JCB Screwdriver Pz 2x125mm
G03105JCB JCB Screwdriver Pz 2x200mm
G03106JCB JCB Screwdriver Pz 3x150mm
G03116JCB JCB Screwdriver SL 3.5x75mm
G03117JCB JCB Screwdriver SL 4x100mm
G03118JCB JCB Screwdriver SL 5.5x125mm
G03119JCB JCB Screwdriver SL 6.5x150mm
G03120JCB JCB Screwdriver SL 8x175mm
STEEL
FAsTenIngTooLs
FAstening tools
81FAstening tools
FAsTenIngTooLs
STEEL
STEEL
10 Piece screwdriver set
Contents:• SL 3.5x75, 5.5x125, 8x175, 6.5x40• PZ0x75, PZ1x100, 2x200• PH0x75, PH1x100, 2x200• Includes canvas case
5 Piece Thru Tang screwdriver set
Contents:• SL5x75mm, SL6x100mm,
SL6x150mm, PH1x75mm, PH2x100mm
• Includes canvas case
soft grip for comfort and control
soft grip for comfort and control
s2 steel for maximum strength and longer life
s2 steel for maximum strength and longer life
Corrosion resistant coating
Corrosion resistant coatingMagnetic tips
Thru tang shaft - strike force is transferred to tip
Item Number Description Size
G03109JCB JCB Screwdriver Set 10pc in Case Mixed
G03108JCB JCB Screwdriver Set 6pc With Pouch Mixed (not shown)
G03110JCB JCB Thru Tang Chisel Screwdriver Set 5pc Mixed
82
10 Piece Precision screwdriver set
Contents: • SL1.5x50mm, SL2x50mm,
sL2.5x50mm, sL3x50mm, PH1x50mm, PH00x50mm, PH0x50mm, T7x50mm, T8x50mm, T9x50mm
• Includes canvas case
4 Piece Long Reach screwdriver set
Contents:• SL4x450mm,
sL5x450mm, PZ1x450mm, PZ2x450mm
soft grip for comfort and control
soft grip for comfort and control
s2 steel for maximum strength and longer life
Corrosion resistant coating
Magnetic tips
Magnetic tips CR-V Blade
Item Number Description Size
G03107JCB JCB Precision Screwdriver Set 10pc Mixed
G03111JCB JCB Long Reach Screwdriver Set 4pc Mixed
STEEL
STEEL
FAsTenIngTooLs
FAstening tools
83
Ratchetting screwdriver with 6pc screwdriver Bits
Contents:• Ratchetting screwdriver• 4pc S2 steel 25mm (1”) screwdriver
bits with diamond coated tips - PH1, PH2, PZ1, PZ2
• 2pc S2 steel 25mm (1”) screwdriver bits with titanium finish - sL5, sL6
6pc 25mm (1”) S2 steel screwdriver bits
55mm Long blade
Heavy duty ratchet mechanism
soft grip for comfort and control
In-handle bit storage
Item Number Description Size
G03121JCB JCB Ratchetting Screwdriver with 6 bits Mixed
x2SLOTTED
x2PHILLIPS POZI
x2IN-HANDLE
BIT STORAGE
FAsTenIngTooLs
FAstening tools
84
Folding and Locking Hex Key Set
Available in:• Torx-T9, T10, T15, T20, T25, T30, T40• Metric-1.5, 2, 2.5, 3, 4, 5, 6, 8mm• Imperial-5/64, 3/32, 7/64, 1/8, 9/64,
5/32, 3/16, 7/32, 1/4
soft grip for comfort and control
s2 steel for maximum strength and longer life
Corrosion resistant coating
Item Number Description Size
G03122JCB JCB Folding & Locking Allen Key Set Torx Mixed
G03094JCB JCB Folding & Locking Allen Key Set Metric Mixed
G03095JCB JCB Folding & Locking Allen Key Set Imperial Mixed
STEELSTEEL
FAsTenIngTooLs
FAstening tools
85
Long Arm Ball End Hex Key Set
Available in:• Metric sizes: 1.5, 2, 2.5, 3, 4,
4.5, 5, 5.5, 6, 7, 8, 9, 10mm• Imperial sizes: 1/16, 5/64,
3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8”
Ball end for working at different angles
CR-V steel for strength and durability
Corrosion resistant coating
Item Number Description Size
G03096JCB JCB Complete Long Arm Ball End Hex Key Set Mixed
x25
METRIC &IMPERIALSTEEL
RUST
FAsTenIngTooLs
FAstening tools
86 Pliers & Wrenches
end Cutters
PLIeRs &WRENCHES
• Max cutting width: 1.6mm
soft grip handle for comfort and control
soft grip handle for comfort and control
CR-V forged steel with corrosion resistant coatingHardened
cutting edge for longer life
STEEL MAX 1.6MM
RUST
Item Number Description Size
G03079JCB JCB End Cutters 150mm
G03080JCB JCB Heavy Duty Multi Function Wire Plier Mixed
Heavy Duty Multi Function Wire Plier
CR-V forged steel with corrosion resistant coating
Cutting wire sizes etched on head
4 in 1 Functions:• Long nose pliers• Cutters• Crimping tool• Wire stripper
Jaw lock for safety
SAFETY LOCKFORGED STEEL FUNCTIONS
4 IN 1 RUST
87Pliers & Wrenches
PLIeRs &WRENCHES
soft grip handle for comfort and control
High leverage technology - High power, less force
Combinaton pliers max jaw width: 25mmDiagonal pliers max jaw width: 15mmLong nose pliers max jaw width: 20mm
CR-V forged steel with corrosion resistant coating
Available:• 180mm Combination Pliers• 180mm Diagonal Pliers• 160mm Long Nose Pliers
Hardened cutting edge for longer life
serrated jaws for secure grip on combination and long nose pliers only
High Leverage Pliers
Item Number Description Size
G03075JCB JCB High Leverage Combination Pliers 180mm
G03077JCB JCB High Leverage Snipe Pliers 160mm
G03076JCB JCB High Leverage Side Cutters 180mm
G03073JCB JCB High Leverage Pliers Set 3pc Mixed
STEEL
RUST
88
Ratchetting Water Pump Pliers
• Max jaw width: 28mm
soft grip handle for comfort and control
one-handed operation
CR-V forged steel with corrosion resistant coating
Ratchetting mechanism
Quick release button mechanism
QUICK RELEASE MECHANISM
RUST
JAW WIDTH
28mm
Item Number Description Size
G03078JCB JCB Ratchetting Water Pump Pliers 250mm
PLIeRs &WRENCHES
Pliers & Wrenches
89
Adjustable Wrench
Available in sizes:• 150mm - 19mm jaw opening• 200mm - 27mm jaw opening• 250mm - 30mm jaw opening• 300mm - 38mm jaw opening
soft grip handle for comfort and control
Flat head for light striking with a hammer (do not use as a hammer)
CR-V forged steel with corrosion resistant coating
Double sided metric and imperial measuring scale
STEEL
20 10 0
METRIC & IMPERIAL MEASURING SCALE
RUST
Item Number Description Size
G03080JCB JCB Adjustable Wrench 150mm
G03081JCB JCB Adjustable Wrench 200mm
G03082JCB JCB Adjustable Wrench 250mm
G03083JCB JCB Adjustable Wrench 300mm
PLIeRs &WRENCHES
Pliers & Wrenches
90
5 Piece High Leverage Pliers and Wrench Set
Contents:• 200mm long nose pliers• 200mm combination pliers• 180mm diagonal cutters • 200mm water pump pliers• 200mm adjustable wrench• Includes canvas case soft grip handle
for comfort and control
CR-V forged steel with corrosion resistant coating
Hardened cutting edge for longer life
Pliers: High leverage technology - High power, less force
STEEL
Item Number Description Size
G03074JCB JCB High Leverage Pliers & Wrench Set 5pc Mixed
PLIeRs &WRENCHES
Pliers & Wrenches
91
PLIeRs &WRENCHES
Pliers & Wrenches
10 in 1 Multi-Tool
10 Functions:• Combination pliers• Wire stripper• Knife• Long nose pliers• Wire cutter• Saw• Slotted screwdriver• Can opener• Bottle opener• Hex driver with
double ended bit
Saw
Slotted screwdriver
Wire cutter
Bottle opener
Can opener
Hex driver with double ended bit
Compact design with one-handed sliding mechanism
Long nose pliers
Combination pliers
Knife
Aluminium handle
Item number Description
G03062JCB JCB retractable multi tools
FUNCTIONS
x10SPACE SAVING
DESIGN
92
93
sTRIKIngTooLs
striking tools
High Velocity Hammer
Reduced vibration and fatigue
Powerboost: 16oz hammer with 24oz strikeforce
Magnetic nail setter
Anti-slip strikeface for increased grip
soft grip handle for comfort and control
16oz/454g MAGNETIC NAIL SETTER
24oz STRIKING FORCE
Item Number Description Size
G03032JCB JCB Heavy Duty High Velocity Hammer 16oz
94
Claw Hammer
Hardened steel
Hardened steel
soft grip handle for comfort and control
soft grip handle for comfort and control
Reduced vibration and fatigue
Reduced vibration and fatigue
Drywall Hammer
Item Number Description Size
G03033JCB JCB Claw Hammer 16oz
G03034JCB JCB Claw Hammer 20oz
G03035JCB JCB Drywall Hammer 12oz
ONE PIECECONSTRUCTION
ONE PIECECONSTRUCTION
striking tools
sTRIKIngTooLs
95
Brick Hammer
Club Hammer
Hardened steel
Hardened steel
soft grip handle for comfort and control
soft grip handle for comfort and control
Reduced vibration and fatigue
Reduced vibration and fatigue
Item Number Description Size
G03036JCB JCB Brick Hammer 20oz
G03037JCB JCB Construction Club Hammer 2.5lb
ONE PIECECONSTRUCTION
ONE PIECECONSTRUCTION
sTRIKIngTooLs
striking tools
96
Brick Bolster
Hand guard
sandblasted tip
CR-V steel for strength and durability
Cold Chisel
CR-V steel for strength and durability
sandblasted tip
Item Number Description Size
G03043JCB JCB Cold Chisel - 0.5” x 6” 152x13mm
G03044JCB JCB Cold Chisel - 1” x 12” 305x25mm
G03038JCB JCB Brick Bolster 76x215mm
G03039JCB JCB Brick Bolster & Guard 76x215mm
G03040JCB JCB Brick Bolster & Guard 100x215mm
SANDBLASTED TIP
SANDBLASTED TIP
striking tools
sTRIKIngTooLs
97
electrician’s Bolster
Hand guard
sandblasted tipCR-V steel for strength and durability
SANDBLASTED TIP
sTRIKIngTooLs
striking tools
Demolition Barsone piece forged steel construction
nail puller
SANDBLASTED TIPFORGED STEEL
Item Number Description Size
G03041JCB JCB Electricians Bolster - 3” x 11” 76x280mm
G03042JCB JCB Electricians Bolster - 3” x 11” & Guard 76x280mm
G03045JCB JCB Utility Bar 13”
G03046JCB JCB Utility Bar 21”
G03047JCB JCB Demolition Bar 24”
G03031JCB JCB Wrecking Bar 36”
G03048JCB JCB Demolition Twin Pack 14” Wrecking & 15” Utility
98
Indestructible Hammers
Fibreglass Sledge Hammer
Lanyard holes for ease of working at heights
soft grip handle for comfort and control
Reduced vibration and fatigue
Working Temperature Range: -10° C to 50°C
Forged steel head
Item Number Description Size
G03049JCB JCB Fibreglass Sledge Hammer 7lb
G03145JCB JCB Indestructible Sledge Hammer 4lb
G03146JCB JCB Indestructible Club Hammer 6lb
G03147JCB JCB Indestructible Club Hammer 10lb
7lb/3.1kg
7lb/3.1kg
striking tools
sTRIKIngTooLs
99
INDESTRUCTIBLEHANDLE TECHNOLOGY
VULCANIZED RUBBER HANDLE
absorbs impact & vibration reducing
user fatigue
STEEL LOCKING PLATE
locks head to the handle eliminating loosening or
dislodging of head
SPRING STEEL BARS
7.1 mm dia spring steel bars resist overstrike
without breaking
DROP FORGED HEAD
with induction hardened striking
edges for longer life
BS 876
100
Chisel
CR-V forged steel with corrosion resistant coating
soft grip handle for comfort and control
Thru tang shaft
Thru tang shaft - strike force is transferred to tip
striking end cap for strength and durability
Item Number Description Size
G03063JCB JCB 6mm Chisel 6mm
G03064JCB JCB 12mm Chisel 12mm
G03065JCB JCB 25mm Chisel 25mm
G03066JCB JCB 32mm Chisel 32mm
G03067JCB JCB 38mm Chisel 38mm
G03068JCB JCB 51mm Chisel 51mm
G03070JCB JCB 3pc Wood Chisel Set Mixed
G03071JCB JCB 5pc Wood Chisel Set Mixed
THRU TANG WITH STRIKE CAPSTEEL
striking tools
sTRIKIngTooLs
101
Hammer striking edge on blade
Dual cutting edge on blade
Metal end cap on handle for striking with hammer
• Built for rough woodwork, construction and carpentry
• Heavy-duty wrecking knife and chisel tool in one
• Includes canvas storage pouch
Chisel KnifeHAMMER STRIKING
EDGE ON BLADE HAMMER STRIKING
END CAPDUAL CUTTING EDGE ON BLADE
Item number Description
G03072JCB JCB Chisel Knife
G03069JCB JCB Dimand Stone and Honing Guide Set
sTRIKIngTooLs
striking tools
Aluminium alloy steel body
single sided diamond stone 150x50mm 400grit
Diamond Stone and Honing Guide Set
Contents: • Angle setting guide, diamond
stone size (150x50mm)
102
103
MeAsURIngTooLs
MeAsUring tools
scaffold Level
• Accuracy: 0.5mm/m
Robust aluminium construction provides strength and durability
2 easy-view vials: 90° and 180°
30° and 45° corner angles
Magnetic base
Torpedo Level
• Accuracy: 0.5mm/m
Robust aluminium construction provides strength and durability
3 easy-view vials: 45°, 90° and 180°
end caps provide superior shock resistance
Magnetic
CORNER ANGLES
30°
45°
MAGNETIC
x22 EASY-VIEW VIALS
MAGNETIC
x33 EASY-VIEW VIALS
Item Number Description Size
G03124JCB JCB Scaffold Level 250mm
G03123JCB JCB Torpedo Level 250mm
104 MeAsUring tools
MeAsURIngTooLs
shock Resistant Box Beam Level
• Accuracy: 0.4mm/m
Robust Aluminium construction provides strength and durability
3 easy-view vials: 90°, 90° and 180°
Magnetic(600mm, 900mm and 1200mm)
Two milled surfaces
end caps provide superior shock resistance
Item Number Description Size
G03125JCB JCB Box Level With Magnet 600mm
G03126JCB JCB Box Level With Magnet 900mm
G03127JCB JCB Box Level With Magnet 1200mm
G03128JCB JCB Box Level Without Magnet 1800mm
G03129JCB JCB 3pc Box Level Set in Canvas Case 600mm/1200mm & Torpedo
MAGNETIC
x33 EASY-VIEW VIALS END CAPS
105
MeAsURIngTooLs
MeAsUring tools
Tape Measure
Chrome-plated case with rubber cushion grip
Double sided metric and imperial measuring scale
one-handed auto-lock mechanism
Magnetic T-profile end hook
Durable nylon-coated blade
Item Number Description Size
G03060JCB JCB 5m Tape Measure 5m
G03061JCB JCB 8m Tape Measure 8m
METRIC & IMPERIAL SCALE
21 31 2 3
4 5 6 72m
DOUBLE SIDED MEASURING SCALE
21 31 2
4 5
21 3
1 2
4 5
MAGNETIC END HOOK
ONE-HANDED AUTO-LOCK
106
107
TooLsToRAge
tool storAge
secure locking system Multiple Configurations
Heavy duty high impact resin
Durable metal latches and hinges
Integrated water and dust seal
site system
Item Number Description Size
G07015JCB JCB Site Organiser 22”
G07016JCB JCB Site Tool Box 22”
G07017JCB JCB Site Cart 22”
G07013JCB JCB Site Crate 22”
108
Tote Bag with Cover
soft grip handle
Durable material
saw holder
Roll cover with clip fastenings
Hard base
Padded shoulder strap
Item Number Description Size
G07006JCB JCB 20” Hard Base Open Tote with Cover 20” (500mm)
tool storAge
TooLsToRAge
109
JCB Wheeled Bag
Large internal capacity
Wide opening for easy access
Telescopic handle
Roller Wheels
Item Number Description Size
G07010JCB JCB Wheeled Bag 480 x 400mm
TooLsToRAge
tool storAge
110
Lab Top Bag
External zipped pockets Multiple internal
accessory pockets
Padded shoulder strap
TooLsToRAge
Trolley Bag
Item Number Description Size
G07011JCB JCB Lab Top Bag 420 x 300mm
G07012JCB JCB Trolley Bag 640 x 330mm
Telescopic handle
open top for easy access
Roller Wheels
tool storAge
111
soft sided Tool Bag
Durable grip carrying handle
Durable material
secure hard base bag
open design for easy access with multiple accessory pockets
Padded shoulder strap
High visibility detail
TooLsToRAge
Technician’s Tote
Item Number Description Size
G07004JCB JCB 20” (500mm) Hard Base Open Mouth Bag 20” (500mm)
G07005JCB JCB Technician’s Tote 12” (305mm)
Durable material
Hard base
High visibility detail
soft grip carrying handle
Padded shoulder strap
Multiple external accessory pockets
tool storAge
112
Tool Belt with Drill Holster
Drill Holster Tool Belt
Double Tool Belt
Durable material
Durable material
Durable material
High visibility detail
Padded tool belt
Drill holster pouch with accessory pockets
Tool pouch with accessory pockets and hammer loop
Tape measure holder
Tape measure holder
TooLsToRAge
Item Number Description Size
G07007JCB JCB Drill Holster and Pouch One size
G07009JCB JCB Single Drill Holster Pouch One size
G07008JCB JCB Double Tool Pouch One size
High visibility detail
High visibility detail
Accessory pockets
Built in drill holster
Hammer loop
Multiple accessory pockets
tool storAge
113
Reinforcing Rib - Increases durability and allows for hand tool storage
TooLsToRAge
Pro organiser
Item Number Description Size
G07014JCB JCB Pro Organiser 18”
Durable Latches
Weather Seal protects contents from water damage
Full Access While Stacked
no-Travel Bin seals - Keeps contents from shifting between bins
Mountable Bins - Attach to multiple surfaces
tool storAge
114
115
check
JcB-tools.com
for updates
Follow us on:
A Product of Hard Work.www.JCB-tools.com