J.B. SMITH - Amazon S3...2013/09/24 · Material Specification - WPB S9 (Line Pipe Sizes) J-55, N80, 4140, etc . (Oil Country Sizes) Raw Material Code - Each part is die stamped with

www.anvilintl.com

FREIGHT ALLOWANCE:All prices are F.O.B. point of shipment. Title of goods shall pass to the buyer upon delivery of the shipment to the carrier. Shipments weighing 2,500 pounds or more will be forwarded prepaid to any point in the United States (except Alaska and Hawaii). Shipments weighing less than 2,500 pounds will be shipped prepaid. The buyer will be invoiced for freight costs at the applicable published class, exception or commodity rate(s), or charges. Anvil reserves the right to select the carrier for all shipments.

NOTE:

Prices apply only to Standard Sizes as listed in catalogs.

Non-standard sizes produced to order only – prices on application. Sale is final not subject to cancellation, except upon agreement to make payment for work performed.

On orders received for cartoned items in less than "carton (not container) quantities," we reserve the right to adjust to the next carton quantity above the number of pieces shown on the order.

All orders are accepted on the basis or prices in effect at the time of shipment.

NOTICE:To the prices and terms quoted, there will be added any manufacturers or sales tax payable on the transaction under any effective statute.

GENERAL • UPC numbers are available upon request. Please contact your local

Anvil Representative. • Including weights and packaging. Applies to: Swage Nipples, Bull Plugs, Oil

Country, Fittings, Couplings, Stainless Swages.• Pricing is subject to change without notice. Go to Anvil’s Web site for the most

current list price information, or contact your local Anvil representative.

LOSS OR DAMAGE CLAIMS:All goods are shipped at buyer’s risk. Shipments should be carefully examined upon delivery and before the carrier’s delivery receipt is signed. If any loss or damage is evident, the buyer should make an appropriate notation on the delivery receipt and insist that the carrier’s driver initial such exception. The contents of all packages should be carefully examined for concealed damage as soon as possible after delivery, so that the carrier can be requested, within 48 hours after delivery, to arrange for prompt inspection of the damaged goods.

Price Sheet JBS-5.11 | Effective: May 23, 2011 | Cancels Price Sheet JBS-2.11 of February 7, 2011

J.B. SMITH

FOR THE MOST CURRENT PRODUCT/PRICING INFORMATION ON ANVIL PRODUCTS, PLEASE VISIT OUR WEBSITE AT WWW.ANVILINTL.COM

NORTHERN REGION CUSTOMER SERVICE CENTER

800 -301-2701

SOUTHERN REGION CUSTOMER SERVICE CENTER

800 -451-4414

Price List............... Sheet # JBS-5.11

Effective Date: May 23, 2011Replaces Prior Date: February 7, 2011

2 www.anvilintl.com

J.B. SMITH

1. CONTROLLING PROVISIONS:These terms and conditions shall control with respect to any purchase order or sale of Seller’s products. No waiver, alteration or modification of these terms and conditions whether on Buyer’s purchase order or otherwise shall be valid unless the waiver, alteration or modification is specifically accepted in writing and signed by an authorized representative of Seller.

2. DELIVERY:Seller will make every effort to complete delivery of products as indicated on Seller’s acceptance of an order, but Seller assumes no responsibility or liability, and will accept no backcharge, for loss or damage due to delay or inability to deliver caused by acts of God, war, labor difficulties, accident, delays of carriers, by contractors or suppliers, inability to obtain materials, shortages of fuel and energy, or any other causes of any kind whatever beyond the control of Seller. Seller may terminate any contract of sale of its products without liability of any nature, by written notice to Buyer, in the event that the delay in delivery or performance resulting from any of the aforesaid causes shall continue for a period of sixty (60) days. Under no circumstances shall Seller be liable for any special or consequential damages or for loss, damage, or expense (whether or not based on negligence) directly or indirectly arising from delays or failure to give notice of delay.

3. WARRANTY:Seller warrants for one year from the date of shipment Seller’s manufactured products to the extent that Seller will replace those having defects in material or workmanship when used for the purpose and in the manner which Seller recommends. If Seller examination shall disclose to its satisfaction that the products are defective, and an adjustment is required, the amount of such adjustment shall not exceed the net sales price of the defective products only and no allowance will be made for labor or expense of repairing or replacing defective products or workmanship of damage resulting from the same. Seller warrants the products which it sells of other manufacturers to the extent of the warranties of their respective makers. Where engineering design or fabrication work is supplied. Buyer’s acceptance of Seller’s design or of delivery of work shall relieve Seller of all further obligation, other than expressed in Seller’s product warranty. THIS IS SELLER’S SOLE WARRANTY. SELLER MAKES NO OTHER WARRANTY OF ANY KIND, EXPRESSED OR IMPLIED AND ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FOR A PARTICULAR PURPOSE WHICH EXCEED SELLER’S AFORESTATED OBLIGATION ARE HEREBY DISCLAIMED BY SELLER AND EXCLUDED FROM THIS WARRANTY. Seller neither assumes, nor authorizes any person to assume for it, any other obligation in connection with the sale of its engineering designs or products. This warranty shall not apply to any products or parts of products which (a) have been repaired or altered outside of Seller’s factory, in any manner: (b) have been subjected to misuse, negligence or accidents; (c) have been used in a manner contrary to Seller’s instructions or recommendations. Seller shall not be responsible for design errors due to inaccurate or incomplete information supplied by Buyer or its representatives.

4. SELLER’S LIABILITY:Seller will not be liable for any loss, damage, cost of repairs, incidental or consequential damages of any kind, whether based upon warranty (except for the obligation accepted by Seller under “Warranty” above), contract or negligence, arising in connection with the design, manufacture, sale, use or repair of the products or of the engineering designs supplied to Buyer.

5. RETURNS:Seller cannot accept return of any products unless its written permission has been first obtained, in which case same will be credited subject to the following (a) All material returned must, on its arrival at Seller’s Plant, be found to be in first-class condition; if not, cost of putting in saleable condition will be deducted from credit memoranda; (b) A handling charge deduction of twenty percent (20%) will be made from all credit memoranda issued for material returned; (c) Transportation charges, if not prepaid will be deducted from credit memoranda.

6. SHIPMENTS:All products sent out will be carefully examined, counted and packed. The cost of any special packing or special handling caused by Buyer’s requirements or requests shall be added to the amount of the order. No claim for shortages will be allowed unless made in writing within ten (10) days of receipt of a shipment.

Claims for products damaged or lost in transit should be made on the carrier, as Seller’s responsibility ceases, and title passes, on delivery to the carrier.

7. SPECIAL PRODUCTS:Orders covering special or nonstandard products are not subject to cancellation except on such terms as Seller may specify on application.

8. PRICES AND DESIGNS:Prices and designs are subject to change without notice. All prices are F.O.B. point of shipment, unless otherwise stated.

9. TAXES:The amount of any sales, excise or other taxes, if any, applicable to the products covered by this order, shall be paid by Buyer unless Buyer provides Seller with an exemption certificate acceptance to the taxing authorities.

10. NUCLEAR PLANTS:Where the products, engineering design or fabrication is for nuclear plant applications. Buyer agrees (a) to take all necessary steps to add Seller as an insured under the American Nuclear Insurers’ (ANI) pool and under the Mutual Atomic Energy Reinsurance Pool (MAERP) for property damage and liability insurance and if necessary steps could have been taken, but are not taken, Buyer shall hold Seller harmless against all such losses which could have been thus covered (b) Buyer agrees to hold Seller harmless with respect to any personal injury (or death), property damage or other loss in a nuclear incident which is caused directly or indirectly by defective design, material, workmanship furnished by Buyer (or which could be so covered but with respect to which Buyer has elected to self-insure), and further agrees to waive subrogation by its carriers of such insurance against Seller, and (c) as to nuclear hazards for which Buyer cannot obtain insurance coverage, the liability of Seller for any personal injury (or death), property damage or other loss directly caused by defective design, material, or workmanship furnished by Seller shall not exceed the value at the time of the loss occurrence.

11. MINIMUM INVOICE:Domestic: $100 plus transportation. International: $500 plus transportation.

12. TERMS:Cash, net 30 days unless otherwise specified.

NOTE: All orders are accepted on the basis of prices in effect at the time of shipment.

NOTICE: The prices and terms quoted, there will be added any manufacturers or sales tax payable on the transaction under any effective statute.

FREIGHT ALLOWANCE: All prices are F.O.B. point of shipment. On shipments weighing 2,500 pounds or more, rail freight or motor freight at the lowest published rate, is allowed to all continental U.S. rail points or all U.S. highway points listed in published tariffs (Alaska and Hawaii excluded). In no case will more than actual freight be allowed. Shipments (weighing less than 2,500 pounds) will be shipped prepaid. The buyer will be invoiced for freight costs at the applicable published class, exception or commodity rate(s) or charge(s). Anvil reserves the right to select the carrier for all shipments.

TERMS AND CONDITIONS



www.anvilintl.com 3

J.B. SMITH

Car

bon

Ste

elO

il C

oun

try

Stai

nle

ss S

teel

TABLE OF CONTENTS

Terms and Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

General InformationManufacturing Specs: Carbon Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4Material Certifications; Carbon Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4Current API Threads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Swage NipplesPackage Quantities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5Swage Nipple Extras . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6Carbon Steel-Concentric . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 & 8Carbon Steel-Eccentric . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9Stainless & Alloy Steel Swage Nipples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

Bull PlugsPackage Quantities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5Bull Plug Extras . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6Carbon Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10Solid Refinery Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Adapter NipplesSeamless . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Oil CountryPackage Quantities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5Oil Country Extras . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 & 12API Thread Standards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12Casing Nipple Extras . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12Swage Nipples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13Swage Nipple – Tubing & Casing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14Bull Plugs – Tubing & Casing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15Tubing Nipples – Standard & Extra Heavy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16Casing Nipples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17Bell Nipples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18Sub Tubing Couplings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18Combination Couplings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19API Tubing Couplings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19Special Clearance Tubing Couplings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19API Casing Couplings – Short & Long Thread . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20



4 www.anvilintl.com

J.B. SMITH

ASTM Spec.

MarkingSymbol

Composition Minimum Max.HBnC Mn P Su Si Tensile Yield

A234 WPB s9A .30 MAX 0.29–1.06 .050 MAX .058 MAX .10 MIN 60,000 PSI 35,000 PSI 197

MARKINGAll J .B . Smith Mfg . fittings are permanently marked as follows:

Manufacturer’s Symbol -

Material Specification - WPB S9 (Line Pipe Sizes)J-55, N80, 4140, etc . (Oil Country Sizes)

Raw Material Code - Each part is die stamped with a three or four digit code identifying the raw material type, details of purchase and steel mill test report .

Heat Treatment - When marked WPB S9, an acceptable heat treatment is understood to have been performed .All oil country sizes formed from pipe have been normalized, but are unmarked to avoid confusion with the symbol N–80 .Fittings cold or hot formed from pipe bear an additional two- letter code indicating the hour and day the part received final heat treatment .

Label information - Size and Wall Thickness

THREADINGLine pipe, tubing and casing are in conformance with API 5B .

COATINGSZinc Electroplate - ASTM, A164

Type RSPaint (Beveled Ends)

WELD BEVELSWeld Bevels are machined as per ANSI- B-16 .9

MANUFACTURING SPECIFICATIONJ .B . Smith Mfg . manufactures swage nipples and bull plugs in accordance with A234 and MSS-SP-95, from A-106 Grade B seamless pipe and A-1000 series, low to medium carbon, fine grain, cold drawn bar stock, and heat treated to these specifications . The chemical and physical properties of the raw material fall within the ranges listed below .

TRACEABILITYAll raw material purchased by J .B . Smith Mfg . is fully traceable to the mill source . A three or four digit code appears on all J .B . Smith products made since the institution of this program . As a result, mill test reports are now available at any time on products so coded . For mill test reports go to www .anvilintl .com .

PRESSURE RATINGSDue to the wide variation in service conditions, temperature, vibrations, etc ., J .B . Smith Mfg . can make no recommendations as to allowable working pressure of swage nipples and bull plugs . There are a number of working pressure formulas from which the end user may choose to determine the required wall thickness of the piping system . It is our responsibility only to furnish a fitting with end dimensions equal to those of the pipe size and schedule ordered .

MATERIAL CERTIFICATION – CARBON STEELJ .B . Smith Mfg ., certifies that the material used to manufacture line pipe sizes of swage nipples and bull plugs has been processed and heat treated to comply with all requirements of ASTM A234-11 and the chemical and physical properties of the raw material fall within the ranges listed below .

SWAGE NIPPLES, BULL PLUGS, OIL COUNTRY FITTINGS, COUPLINGS, STAINLESS SWAGES



www.anvilintl.com 5

J.B. SMITH

Car

bon

Ste

elO

il C

oun

try

Stai

nle

ss S

teel

PACKAGING

Size (Inches)Swage Nipples Bull Plugs

Oil CountryStd HX 160–XXH Std–XH 160–XXH

1⁄8 24 24 24 24

1⁄4 24 24 24 24

3⁄8 24 24 24 24

1⁄2 24 24 24 24

3⁄4 12 12 12 12

1 12 12 12 12

11⁄4 12 12 12 12

11⁄2 12 12 12 12

2 12 12 12 12 12 12

12" Lg 6

21⁄2 12 12 6 12 6 6

12" Lg 6

3 12 6 6 6 4 6

12" Lg 4

4 6 6 4 6 4 6

5 2 2 2

6 2 2 1

7" OD 1 1 1

8 1 1 1

PACKAGE QUANTITIES



6 www.anvilintl.com

J.B. SMITH

SWAGE NIPPLES & BULL PLUGS

EXTRAS

ALL ECCENTRICS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See page 9 for List Prices

TAPPED BULL PLUGS 2" and smaller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Add to List $15 .93 21⁄2" thru 4" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Add to List $25 .40 Larger than 4" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Add to List $48 .56

SPECIAL LENGTHS OF SWAGES AND BULL PLUGS Shorter than regular, or 50% longer than regular . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Add 40% to List price 51% to 75% longer than regular . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Add 55% to List price 76% to 100% longer than regular . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Add 80% to List price Over 100% longer than regular length, add 10% for each additional 2" or fraction thereof

SQUARE CUT OR PLAIN ENDSThe description "Plain End" or "PE" must be clarified to determine if square cut or beveled ends are required . All Swage Nipples and Bull Plugs with square cut ends specified must be resized, square cut and fitted into socketweld fitting gauges to ensure a proper fit and installation . For this added service, the following price extras apply for Carbon Steel only:

Large End Sizes 1¹∕₂" and smaller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . List plus 30% 2" and larger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . List plus 20%

GROOVED ENDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . One end +5%; Two ends +10%

COMBINATION ENDS Swage Nipples with different schedule or wall thickness on each end, use price of heaviest wall plus 50%

FEMALE SWAGE NIPPLES Price on application

OIL COUNTRY EXTRAS See page 12

SWAGE NIPPLES THREADED BOTH ENDS, SPECIFIED Black or Unplated . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . List plus 10%

MILL TEST REPORTS Mill test reports are available online at http://www .anvilintl .com



www.anvilintl.com 7

J.B. SMITH

Oil

Cou

ntr

ySt

ain

less

Ste

elC

arbo

n S

teel

CARBON STEEL

1⁄4" THRU 3"

*THESE SIZES NOT MADE IN STANDARD WEIGHTPrices shown are for API line pipe threaded ends, beveled ends or any combination thereof. (For square and grooved ends, see “Extras” on page 6.) See page 4 for certification of raw material and marking. Other price “Extras” on page 6.All Eccentrics – See page 9 for calculated list.Select sizes of 1" and smaller swages in EX and 160 weights available in A106 POA.

All sizes on this page have been processed in a manner strictly conforming to the requirements of ASTM A234, from material fully meeting all requirements of that specification. The correct marking for swage nipples to denote conformance with this specification is “WPB S-9.” All sizes 1" and smaller will be made from hex barstock. Most sizes 11⁄4" and larger will be made from pipe and where pipe is not a practical raw material, round barstock will be used. No sacrifice of properties will result from such practice.

CONCENTRIC SWAGE NIPPLES

Size (Inches) Length (Inches)

Standard Extra Heavy Dbl XH & 160

Pipe API or O.D. Reduced To Weight Each Price Each Weight Each Price Each Weight Each Price Each

1⁄4" 0.540 1⁄8 21⁄4 - - - $49.49 0.25 $61.053⁄8" 0.675 1⁄8 21⁄2 - - 0.25 $49.49 0.375 $61.05

1⁄4 21⁄2 - - 0.25 $43.45 0.375 $53.761⁄2" 0.840 1⁄8 23⁄4 - - 0.33 $49.49 0.50 $61.05

1⁄4 and 3⁄8 23⁄4 - - 0.33 $40.77 0.50 $50.283⁄4" 1.050 1⁄8 3 - - 0.50 $66.24 0.75 $81.78

1⁄4 and 3⁄8 3 - - 0.50 $60.37 0.75 $74.491⁄2 3 - - 0.50 $46.32 0.75 $57.16

1" 1.315 1⁄8 31⁄2 - - 0.67 $81.79 1.00 $100.911⁄4 and 3⁄8 31⁄2 - - 0.67 $71.76 1.00 $92.981⁄2 and 3⁄4 31⁄2 - - 0.67 $57.22 1.00 $74.09

11⁄4" 1.660 1⁄4 and 3⁄8 4 - - 1.00 $117.13 1.50 $227.111⁄2 and 3⁄4 4 - - 1.00 $88.97 1.50 $206.41

1 4 - - 1.00 $84.79 1.50 $164.74

11⁄2" 1.900 1⁄4 and 3⁄8 41⁄2 - - 1.17 $146.79 2.00 $227.111⁄2 and 3⁄4 41⁄2 - - 1.17 $113.56 2.00 $215.08

1 41⁄2 - - 1.17 $99.29 2.00 $170.23

11⁄4 41⁄2 - - 1.17 $99.29 2.00 $154.74

2" 2.375 1⁄4 and 3⁄8 61⁄2 - - 3.00 $230.21 4.25 $364.941⁄2 and 3⁄4 61⁄2 - - 3.00 $203.86 4.25 $343.01

1 61⁄2 2.00 $139.67 2.33 $161.29 4.25 $318.77

11⁄4 61⁄2 2.00 $157.39 2.33 $171.08 4.25 $318.77

11⁄2 61⁄2 2.00 $118.86 2.33 $161.29 4.25 $318.77

21⁄2" 2.875 1⁄2 and 3⁄4 7 - - 3.50 POA 8.00 $420.68

1 7 3.00 $174.65 3.50 $250.72 8.00 $397.25

11⁄4 7 3.00 $190.26 3.50 $262.96 8.00 $397.25

11⁄2 7 3.00 $182.79 3.50 $239.04 8.00 $397.25

2 7 3.00 $149.77 3.50 $192.58 8.00 $361.79

3" 3.500 1⁄2 and 3⁄4 8 - - 6.00 $535.64 11.00 $535.64

1 8 4.50 $243.06 6.00 $301.71 11.00 $495.32

11⁄4 8 4.50 $264.81 6.00 $316.58 11.00 $495.32

11⁄2 8 4.50 $245.51 6.00 $287.72 11.00 $495.32

2 and 21⁄2 8 4.50 $171.38 6.00 $221.86 11.00 $432.65



8 www.anvilintl.com

J.B. SMITH

CARBON STEEL

Prices shown are for API line pipe threaded ends, beveled ends or any combination thereof.(For square and grooved ends, see “Extras” on page 6.)Other price "Extras" on page 6.All Eccentrics – See page 9.Swage Nipples, threaded both ends, specified black or unplated – List plus 10%.


Standard Extra Heavy Dbl XH & 160

Pipe API or O.D. Reduced To Weight Each Price Each Weight Each Price Each Weight Each Price Each

31⁄2" 41⁄2 thru 11⁄2 8 5.50 POA 7.50 POA 13.50 POA

2 thru 3 8 5.50 POA 7.50 POA 13.50 POA

4" 41⁄2

1⁄2 and 3⁄4 9 - - 10.00 POA 11.00 $820.73

1 9 7.00 $386.21 10.00 $474.41 - $654.35

11⁄4 and 11⁄2 9 7.50 $371.29 10.00 $455.93 11.00 $654.35

2 9 7.50 $271.75 9.50 $367.48 11.00 $579.30

21⁄2 9 7.00 $293.70 10.00 $351.02 11.00 $579.30

3 and 31⁄2 9 7.00 $249.48 10.00 $334.59 - $579.30

5" 59⁄16

1 thru 11⁄2 11 - POA 17.00 POA 33.00 POA

2 and 21⁄2 11 11.50 $1,029.69 17.00 $1,104.53 33.00 POA

3 and 31⁄2 11 11.50 $831.76 17.00 $995.24 33.00 POA

4 11 11.50 $685.26 17.00 $885.04 33.00 POA

6" 65⁄8

1 thru 11⁄2 12 - POA 25.00 POA 46.00 POA

2 and 21⁄2 12 17.50 $1,320.47 25.00 $1,289.98 46.00 POA

3 and 31⁄2 12 17.00 $940.37 25.00 $1,109.32 46.00 POA

4 12 17.50 $776.77 24.00 $1,084.12 46.00 POA

5 12 17.00 $746.45 25.00 $985.43 46.00 POA

8" 85⁄8

2 thru 3 13 29.00 $2,947.17 44.00 $2,826.55 78.00 POA

4 and 5 13 29.00 $2,839.82 44.00 $2,943.00 78.00 POA

6 13 30.00 $1,733.43 44.00 $2,212.72 78.00 POA

31⁄2" THRU 8"

CONCENTRIC SWAGE NIPPLES



www.anvilintl.com 9

J.B. SMITH

Oil

Cou

ntr

ySt

ain

less

Ste

elC

arbo

n S

teel

CARBON STEEL


Standard Extra Heavy Dbl Ex & 160

Pipe API or O.D. Reduced To Weight Each Price Each Weight Each Price Each Weight Each Price Each1⁄4" 0.540 1⁄8 21⁄4 - - - $196.94 0.25 $235.06

3⁄8" 0.6751⁄8 21⁄2 - - 0.25 $196.94 0.38 $235.061⁄4 21⁄2 - - 0.25 $173.25 0.38 $206.81

1⁄2" 0.840 1⁄4 and 3⁄8 23⁄4 - - 0.33 $162.13 0.50 $193.56

3⁄4" 1.0501⁄4 and 3⁄8 3 - - 0.50 $240.30 0.75 $286.79

1⁄2 3 - - 0.50 $184.29 0.75 $219.97

1" 1.3151⁄4 and 3⁄8 31⁄2 - - 0.67 $299.90 1.00 $357.921⁄2 and 3⁄4 31⁄2 - - 0.67 $238.93 1.00 $285.16

11⁄4" 1.6601⁄2 and 3⁄4 4 - - 1.00 $371.71 1.50 $794.71

1 4 - - 1.00 $354.32 1.50 $634.22

11⁄2" 1.900

1⁄2 and 3⁄4 41⁄2 - - 1.17 $474.71 2.00 $828.16

1 41⁄2 - - 1.17 $414.88 2.00 $655.46

11⁄4 41⁄2 - - 1.17 $414.88 2.00 $595.77

2" 2.375

1⁄4 and 3⁄8 61⁄2 - - 3.00 $892.93 4.25 $1,405.071⁄2 and 3⁄4 61⁄2 - - 3.00 $852.17 4.25 $1,320.41

1 61⁄2 2.00 $584.18 2.33 $673.89 4.25 $1,227.23

11⁄4 61⁄2 2.00 $657.94 2.33 $715.26 4.25 $1,227.23

11⁄2 61⁄2 2.00 $496.85 2.33 $673.89 4.25 $1,227.23

21⁄2" 2.875

1 7 3.00 $730.06 3.50 $1,047.83 8.00 $1,529.40

11⁄4 7 3.00 $795.15 3.50 $1,099.35 8.00 $1,529.40

11⁄2 7 3.00 $764.17 3.50 $999.33 8.00 $1,529.40

2 7 3.00 $626.02 3.50 $804.85 8.00 $1,392.82

3" 3.500

1⁄2 and 3⁄4 8 4.50 - 6.00 $1,724.24 11.00 $2,044.30

1 8 4.50 $1,114.06 6.00 $1,261.06 11.00 $1,906.68

11⁄4 8 4.50 $1,213.75 6.00 $1,323.06 11.00 $1,906.68

11⁄2 8 4.50 $1,166.09 6.00 $1,202.53 11.00 $1,906.68

2 and 21⁄2 8 4.50 $814.15 6.00 $927.51 11.00 $1,665.71

31⁄2" 4.000 All reductions 8 5.50 POA 7.50 POA 13.50 POA

4" 4.500

1 9 7.50 $1,775.38 10.00 $1,983.27 18.00 $1,888.82

11⁄4 and 11⁄2 9 7.50 $1,702.17 10.00 $1,905.82 18.00 $2,519.24

2 9 7.50 $1,290.92 10.00 $1,536.33 18.00 $2,230.33

21⁄2 9 7.50 $1,346.17 10.00 $1,467.64 18.00 $2,230.33

3 and 31⁄2 9 7.50 $1,185.03 10.00 $1,398.73 18.00 $2,230.33

1⁄4" THRU 4"

ECCENTRIC SWAGE NIPPLES

*THESE SIZES NOT MADE IN STANDARD WEIGHTPrices shown are for API line pipe threaded ends, beveled ends or any combination thereof. (For square and grooved ends, see “Extras” on page 6.) See page 4 for certification of raw material and marking. Other price “Extras” on page 6. Swage nipples, threaded both ends, specified black or unplated – List plus 10%. SIZES NOT SHOWN – PRICES ON APPLICATION.



10 www.anvilintl.com

J.B. SMITH

CARBON STEEL


Standard Extra Heavy Solid Dbl Ex & 160

Pipe API or O.D. Weight Ea. Price Ea. Weight Ea. Price Ea. Weight Ea. Price Ea. Weight Ea. Price Ea.1⁄8" 0.405 2 - - 0.10 $40.84 0.20 $40.84 0.40 $57.301⁄4" 0.540 2 - - 0.11 $37.69 0.20 $37.69 0.40 $56.473⁄8" 0.675 21⁄4 - - 0.14 $40.84 0.33 $40.84 0.29 $61.311⁄2" 0.840 21⁄2 - - 0.33 $42.90 0.50 $42.90 0.50 $64.183⁄4" 1.050 23⁄4 - - 0.50 $44.11 0.80 $44.11 0.75 $66.18

1" 1.315 3 - - 0.67 $51.85 1.375 $51.85 1.00 $77.69

11⁄4" 1.660 31⁄4 - - 1.00 $81.13 2.25 $81.13 1.50 $158.06

11⁄2" 1.900 31⁄2 - - 1.17 $78.30 3.00 $78.30 2.00 $129.68

2" 2.375 4 2.25 $101.92 2.50 $150.87 5.00 $150.87 3.50 $299.77

21⁄2" 2.875 5 3.00 $148.05 3.50 $192.64 - - 8.00 $398.07

3" 3.500 6 4.50 $204.32 6.00 $256.19 - - 11.00 $641.47

31⁄2" 4.000 61⁄2 5.50 POA 7.50 POA - - 13.50 POA

4" 4.500 7 7.50 $256.92 10.00 $360.44 - - 18.00 $840.58

5" 5.563 81⁄2 12.50 POA 17.00 POA - - 33.00 POA

6" 6.625 10 17.00 $873.77 25.00 $1,291.49 - - 46.00 POA

8" 8.625 11 29.00 $1,280.94 44.00 POA - - 78.00 POA

*THESE SIZES NOT MADE IN STANDARD WEIGHTPrices shown are for API line pipe threaded ends, beveled ends. Tapped Bull Plugs - 3⁄4" & 1" – POA.

2" and smaller add $15.93 to list. 21⁄2" thru 4" add $25.40 to list. Larger than 4" add $48.56 to list.

Hex Bull Plugs - 11⁄4"–3" Use Double Extra Heavy price.

BULL PLUGS

SOLID REFINERY PLUGS

Size Length Price

Hex Heads1⁄8 3" $33.421⁄4 3" $33.423⁄8 3" $33.421⁄2 3" $43.803⁄4 3" $52.69

1 3" $67.66

Round Heads11⁄4 3" $118.93

11⁄2 3" $128.29

2 3" $135.11

BLACK (NON PLATED)

J.B. Smith solid black refinery plugs have been especially designed for refinery use. The body length leaves sufficient length for easy wrench application.

Material conforms to ASTM A234 Grade WPB.

Special Lengths POA

Hex Heads 11⁄4"–3" are available POA

Solid Plug Electroplated – POA



www.anvilintl.com 11

J.B. SMITH

Oil

Cou

ntr

ySt

ain

less

Ste

elC

arbo

n S

teel

CARBON STEEL

Size (Inches) Weight Pipe 3" 4" 6" 8" 10" 12"3⁄4 . . . . - - - - - -

1 . . . . $100.21 $104.18 $105.18 $118.70 $124.68 $134.53

11⁄4 . . . . $104.18 $104.18 $113.89 $122.63 $132.43 $140.07

11⁄2 . . . . $111.83 $111.83 $130.61 $134.53 $144.85 $156.23

2 3.65 lb./ft $52.12 $52.12 $61.06 $69.85 $77.76 $84.62

21⁄2 5.79 lb./ft - $58.99 $75.80 $88.46 $97.31 $115.08

3 7.58 lb./ft $78.60 $78.60 $88.46 $105.21 $121.67 $141.45

4 10.79 lb./ft $96.33 $96.33 $107.13 $141.52 $167.12 $186.86

5 14.62 lb./ft - $246.71 $274.37 $301.04 $324.38 $355.04

6 18.97 lb./ft - $318.60 $355.04 $390.15 $422.61 $458.01

8 28.55 lb./ft - - $398.08 $442.39 $483.62 $529.79

10 40.48 lb./ft - - POA POA POA POA

12 49.56 lb./ft - - POA POA POA POA

SEAMLESS – SCHEDULE 40

ADAPTER NIPPLES

For intermediate lengths, use next longer price, plus 25%.Longer than 12", price on application.For extra heavy, double above price. For double extra heavy, four times above price.Above prices apply to endseal grooved, threaded or beveled or any combination of these.Standard grooved is available upon request.




J.B. SMITH

OIL COUNTRY

Nominal Size

O.D. Size Pipe Tubing &

CasingNominal

SizeO.D. Size Pipe Tubing &

Casing

3⁄4 1.050 14 . . . . . . . . 5 . . . . 8 Rd.3⁄4 EUE 1.050 . . . . 10 Rd. . . . . 51⁄2 . . . . 8 Rd.

1 1.315 111⁄2 10 Rd. 5 59⁄16 8V . . . .

1 EUE 1.315 . . . . 10 Rd. . . . . 6 . . . . 8 Rd.

11⁄4 1.660 111⁄2 10 Rd. 6 65⁄8 8V 8 Rd.

11⁄4 EUE 1.660 . . . . 10 Rd. . . . . 7 . . . . 8 Rd.

11⁄2 1.900 111⁄2 10 Rd. . . . . 75⁄8 . . . . 8 Rd.

11⁄2 EUE 1.900 . . . . 10 Rd. 8 85⁄8 8V 8 Rd.

2 23⁄8 111⁄2 10 Rd. . . . . 95⁄8 . . . . 8 Rd.

2 EUE 23⁄8 . . . . 8 Rd. 10 103⁄4 8V 8 Rd.

21⁄2 27⁄8 8V 10 Rd. . . . . 113⁄4 . . . . 8 Rd.

21⁄2 EUE 27⁄8 . . . . 8 Rd. 12 123⁄4 8V . . . .

3 31⁄2 8V 10 Rd. . . . . 133⁄8 . . . . 8 Rd.

3 EUE 31⁄2 . . . . 8 Rd. . . . . 14 8V . . . .

31⁄2 4 8V 8 Rd. . . . . 16 8V 8 Rd.

31⁄2 EUE 4 8V 8 Rd. . . . . 18 8V . . . .

4 41⁄2 8V 8 Rd. . . . . 20 8V 8 Rd.

4 EUE 41⁄2 . . . . 8 Rd. . . . . . . . . . . . . . . . .

CURRENT API THREAD STANDARDS. (For threads NOT shown below, add 50% to list price.)

OIL COUNTRY FITTINGS

Swage Nipples and Bull Plugs longer or shorter than standard - Price on application.Tapped Bull Plugs - 3⁄4" & 1" – POA.

2" and smaller add $15.93 to list. 21⁄2" thru 4" add $25.40 to list. Larger than 4" add $48.56 to list.

OIL COUNTRY EXTRAS

CASING NIPPLES EXTRASAdd 50% to list prices for all casing nipples with other than current API thread specifications.

For combination casing nipples, add the following for each thread:

For Combination Casing Nipples, Add The Following For Each Thread

Combination Thread Long Thread

Sizes up to and including 65⁄8" O.D. $82.68 $95.72

7" O.D. to and including 103⁄4" O.D. $102.71 $116.37

Over 103⁄4" O.D. $147.68 $152.34




J.B. SMITH

Car

bon

Ste

elSt

ain

less

Ste

elO

il C

oun

try

OIL COUNTRY

Nominal Pipe Size (Inches)

Pipe O.D. (Inches)

Reduced To

Length (Inches)

Standard Extra Heavy Double Extra Heavy

Weight Each Price Each Weight Each Price Each Weight Each Price Each

1 1.315 3⁄4 31⁄2 0.67 $465.29 0.67 $526.80 - -

11⁄4 1.660 3⁄4-1 4 1.00 POA 1.00 POA - -

11⁄2 1.900 3⁄4–11⁄4 41⁄2 1.25 $469.94 1.25 $577.04 - -

2 23⁄8 1⁄4–1⁄2–3⁄4 8 2.50 $746.81 4.00 $818.85 - -

1–11⁄4–11⁄2 8 2.50 $659.72 4.00 $720.98 6.00 $1,309.67

21⁄16" O.D. 8 2.50 $659.72 4.00 $720.98 6.00 $1,223.99

21⁄2 27⁄8 1–11⁄4–11⁄2 8 5.00 $820.09 6.00 $911.95 10.00 $1,636.17

2 8 6.00 $616.22 6.00 $796.40 10.00 $1,471.18

3 31⁄2 1–11⁄4–11⁄2 8 7.50 $908.55 9.00 $999.65 14.00 $1,850.51

2–21⁄2 8 7.50 $807.06 9.00 $958.32 14.00 $1,741.36

4 41⁄2 1–11⁄4–11⁄2 9 11.00 $1,115.70 14.00 $1,226.32 23.00 $2,368.89

2–21⁄2 9 11.00 $1,073.35 14.00 $1,167.15 23.00 $2,134.40

3–31⁄2 9 11.00 $1,016.05 14.00 $1,116.32 23.00 $2,012.81

Nominal Pipe Size (Inches)

Pipe O.D. (Inches)

Reduced To

Length (Inches)



1 1.315 3⁄4 31⁄2 0.67 $288.45 0.67 $320.14 - -

11⁄4 1.660 3⁄4-1 4 1.00 $367.53 1.00 $396.60 - -

11⁄2 1.900 3⁄4–11⁄4 41⁄2 1.25 $428.50 1.25 $461.57 - -

2 23⁄8 3⁄4 61⁄2 2.50 $650.71 3.50 $710.92 5.00 $1,563.85

1–11⁄4–11⁄2 61⁄2 2.50 $575.31 3.50 $690.47 5.00 $1,138.08

21⁄2 27⁄8 1–11⁄4–11⁄2 7 4.00 $701.74 6.00 $794.81 9.00 $1,457.97

2 7 4.00 $590.29 6.00 $690.81 9.00 $1,280.07

3 31⁄2 1–11⁄4–11⁄2 8 6.00 $790.80 9.00 $868.16 12.00 $1,892.89

2–21⁄2 8 6.00 $701.96 9.00 $833.79 12.00 $1,515.97

4 41⁄2 1–11⁄4–11⁄2 9 8.00 $973.02 12.00 $1,068.18 20.00 $2,059.81

2–21⁄2 9 8.00 $930.54 12.00 $1,016.00 20.00 $1,857.47

3–31⁄2 9 8.00 $884.90 12.00 $970.84 20.00 $1,748.54

51⁄2 2–3 11 12.50 $1,765.64 17.00 $1,984.18 33.00 $2,488.24

7 2–3 12 17.00 $2,128.87 25.00 $2,561.26 50.00 $3,492.33

OIL COUNTRY – LARGE END UPSET REDUCED TO REGULAR OR UPSET

OIL COUNTRY – LARGE END NON-UPSET REDUCED TO UPSET

Swage Nipples non-upset on large end are made from J-55, K-55, N-80, L-80 or the most appropriate material available.Swage Nipples upset on large end are made from J-55 unless otherwise specified. For N-80 or L-80 - Add 25%.Price covers nipples with tubing threads on one end with line pipe, tubing or casing threads on the other end. Ends may be beveled at no extra charge.

SWAGE NIPPLES

SWAGE NIPPLES




J.B. SMITH

OIL COUNTRY

Size (Inches)Length

(Inches)


I.D. or Nominal O.D. Reduced To Weight Each Price Each Weight Each Price Each Weight Each Price Each

1 1.315 1⁄4 thru 3⁄4 31⁄2 0.67 POA 0.67 POA 1.00 POA11⁄4 1.660 1⁄4 thru 1⁄2 4 1.00 POA 1.00 POA 1.50 POA

3⁄4 and 1 4 1.00 $207.09 1.00 $222.41 1.50 POA11⁄2 1.900 1⁄4 thru 3⁄4 41⁄2 1.17 POA 1.06 POA 2.00 POA

1 and 11⁄4 41⁄2 1.17 $221.86 1.00 $244.35 2.00 POA2 23⁄8 1⁄4 thru 3⁄4 61⁄2 2.50 - 3.00 POA 4.25 POA

1 thru 2 O.D. 61⁄2 2.00 $189.87 2.33 $266.30 4.25 POA21⁄2 27⁄8 1⁄4 thru 3⁄4 7 3.00 - 3.50 POA 8.00 POA

1 thru 11⁄2 7 3.00 POA 3.50 POA 8.00 POA2 and 21⁄16 7 3.00 $213.60 3.50 $328.35 8.00 POA

3 31⁄2 1 thru 11⁄2 8 4.50 POA 6.00 POA 11.00 POA2 and 21⁄2 8 4.50 $258.89 6.00 $380.79 11.00 POA

4 41⁄2 1 thru 11⁄2 9 7.00 POA 10.00 POA 18.00 POA2 thru 4 O.D. 9 7.50 $380.79 10.00 $599.09 18.00 POA

5 1 thru 11⁄2 10 9.50 POA 15.00 POA 24.00 POA2 thru 41⁄2 O.D. 10 9.50 POA 15.00 POA 24.00 POA

51⁄2 1 thru 11⁄2 11 12.50 POA 17.00 POA 33.00 POA2 and 21⁄2 11 12.50 $1,150.75 17.00 $1,494.29 33.00 POA

3 thru 5 O.D. 11 12.50 $769.33 17.00 $1,197.72 33.00 POA65⁄8 1 thru 11⁄2 12 17.00 POA 25.00 POA 46.00 POA

2 and 21⁄2 12 17.00 $1,695.39 25.00 $1,749.78 46.00 POA3 thru 4 O.D. 12 17.00 $1,144.01 25.00 $1,573.49 46.00 POA4 thru 6 O.D. 12 17.00 $989.94 25.00 $1,400.02 46.00 POA

7 1 thru 11⁄2 12 17.00 POA 25.00 POA - -2 thru 21⁄2 12 17.00 $1,881.28 25.00 $1,969.98 - -

3 thru 5 O.D. 12 17.00 $1,351.02 25.00 $1,799.49 - -51⁄2 O.D. and 6 O.D. 12 17.00 $1,052.41 25.00 $1,685.71 - -

75⁄8 2 thru 3 13 24.00 POA 32.00 POA - -4 O.D. thru 6 O.D. 13 24.00 POA 32.00 POA - -

65⁄8 O.D. thru 7 O.D. 13 24.00 POA 32.00 POA - -85⁄8 2 thru 3 13 29.00 $3,847.12 44.00 $3,836.83 - -

4 thru 6 O.D. 13 29.00 $3,367.45 44.00 $3,503.12 - -65⁄8 O.D. and 75⁄8 O.D. 13 29.00 $1,969.59 44.00 $2,623.95 - -

95⁄8 2 thru 3 14 38.00 POA 48.00 POA - -4 thru 6 O.D. 14 38.00 POA 48.00 POA - -

65⁄8 O.D. and 85⁄8 O.D. 14 38.00 POA 48.00 POA - -103⁄4 2 thru 3 15 48.00 POA 68.00 POA - -

4 thru 6 O.D. 15 48.00 POA 68.00 POA - -65⁄8 O.D. thru 75⁄8-O.D. 15 48.00 POA 68.00 POA - -85⁄8 O.D. thru 95⁄8-O.D. 15 48.00 POA 68.00 POA - -

OIL COUNTRY – TUBING AND CASINGS – NON EUE ENDS

Swage Nipples on this page are made from J-55, K-55, N-80 or the most appropriate material available. Nipples specified N-80, L-80 are Price on application.Prices cover nipples with Tubing Threads (10 Rd.).Casing Threads (8-Rd.) on one end with any thread or finish (Beveled) on the other end. Also includes Casing Sizes, where no thread is specified.

SWAGE NIPPLES




J.B. SMITH

Car

bon

Ste

elSt

ain

less

Ste

elO

il C

oun

try

OIL COUNTRY


Standard Extra Heavy Double Extra Heavy Female

Pipe API or O.D. Weight Each Price Each Weight Each Price Each Weight Each Price Each Price Each3⁄4 EUE 3 1.50 POA 0.50 POA - - -

1 1.315 3 1.50 POA 0.67 POA - - -

1 EUE 3 1.50 POA - POA - - -

11⁄4 1.660 31⁄4 1.50 POA 1.00 POA - - -

11⁄4 EUE 31⁄4 1.50 POA - POA - - -

11⁄2 1.900 31⁄2 1.50 POA 1.06 POA - - -

11⁄2 EUE 31⁄2 2.00 POA 2.25 POA - - -

2 23⁄8 4 2.00 $145.56 3.00 $187.10 4.25 $427.33 $427.33

2 EUE 5 3.50 $246.29 4.00 $337.42 9.00 $571.51 $571.51

21⁄2 27⁄8 5 3.00 $152.10 3.50 $238.78 8.00 $462.23 $462.23

21⁄2 EUE 51⁄2 4.25 $340.07 6.00 $435.33 14.00 $889.46 $889.46

3 31⁄2 6 4.25 $214.83 5.00 $317.80 11.00 $856.63 $856.63

3 EUE 61⁄2 10.00 $376.29 15.00 $567.88 25.00 $1,104.04 $1,104.04

API or O.D. Length (Inches)



41⁄2 7 7.50 $301.92 10.00 $534.17 18.00 POA

5 8 9.50 $374.33 15.00 $665.83 24.00 POA

51⁄2 81⁄2 12.50 $599.91 17.00 $1,050.30 33.00 POA

65⁄8 10 17.00 $802.96 25.00 $1,401.29 46.00 POA

7 10 17.00 $904.72 25.00 $2,258.06 50.00 POA

75⁄8 11 24.00 $1,504.77 32.00 $2,694.20 53.00 -

85⁄8 11 29.00 $1,504.77 44.00 $2,694.20 78.00 -

TUBING

CASING

Std. Bull Plugs listed above are made from J-55 (or better). Such items in XH and XXH are made from J-55, K-55, N-80, L-80 or the most appropriate material available.If specified N-80, L-80 are Price on application.Prices cover Bull Plugs with Tubing Threads (10 Rd. & 8 RD.) Casing Threads (8 Rd.) also include Casing and Tubing Sizes with beveled ends.

BULL PLUGS OIL COUNTRY

BULL PLUGS OIL COUNTRY




J.B. SMITH

OIL COUNTRY

Nominal Pipe Size

End Connection

Length-Price

4" 6" 8" 10" 12" 14" 16" 18"

Price Ea. Price Ea. Price Ea. Price Ea. Price Ea. Price Ea. Price Ea. Price Ea.

1" Upset A.P.I. Thds. One or Both Ends $277.99 $339.39 $424.26 $590.16 - - - -

1" Non-upset (Regular) $170.93 $170.86 $193.31 $224.92 $244.85 $290.36 $313.19 $324.00

11⁄4" Upset A.P.I. Thds. One or Both Ends $269.38 $371.95 $470.55 $640.14 $848.10 - - -

11⁄4" Non-upset (Regular) $170.93 $170.86 $193.31 $224.92 $288.27 $290.36 $313.19 $324.00

11⁄2" Upset A.P.I. Thds. One or Both Ends $310.74 $403.53 $507.62 $709.96 $916.39 - - -


2" Upset A.P.I. Thds. One or Both Ends $294.79 $234.57 $311.62 $338.41 $408.06 $427.78 $449.26 $473.88


21⁄2" Upset A.P.I. Thds. One or Both Ends $385.45 $358.46 $412.14 $437.94 $522.92 $545.34 $577.94 $602.88


3" Upset A.P.I. Thds. One or Both Ends - $563.29 $599.87 $639.86 $770.40 $815.15 $858.72 $905.68

3" Non-upset (Regular) - $312.28 $371.61 $424.49 $472.49 $541.63 $609.56 $634.83

4" Upset A.P.I. Thds. One or Both Ends - - $1,015.53 $1,077.15 $1,297.49 $1,373.56 $1,449.85 $1,516.89

4" Non-upset (Regular) - - - - - - - -

Nominal Pipe Size

End Connection

Length-Price

4" 6" 8" 10" 12" 14" 16" 18"

Price Ea. Price Ea. Price Ea. Price Ea. Price Ea. Price Ea. Price Ea. Price Ea.

1" Upset A.P.I. Thds. One or Both Ends $555.98 $678.78 $848.52 $1,180.32 - - - -


11⁄4" Upset A.P.I. Thds. One or Both Ends $538.76 $743.90 $941.10 $1,280.28 $1,696.20 - - -


11⁄2" Upset A.P.I. Thds. One or Both Ends $621.48 $807.06 $1,015.24 $1,419.92 $1,832.78 - - -


2" Upset A.P.I. Thds. One or Both Ends $589.58 $469.14 $623.24 $632.54 $816.12 $855.56 $898.52 $947.76


21⁄2" Upset A.P.I. Thds. One or Both Ends $770.90 $716.92 $770.36 $875.88 $977.42 $1,090.68 $1,155.88 $1,205.76


3" Upset A.P.I. Thds. One or Both Ends - $1,126.58 $1,199.74 $1,279.72 $1,540.80 $1,630.30 $1,717.44 $1,811.36

3" Non-upset (Regular) - $624.56 $743.22 $848.98 $944.98 $1,083.26 $1,219.12 $1,269.66

4" Upset A.P.I. Thds. One or Both Ends - - $2,031.06 $2,154.30 $2,594.98 $2,747.12 $2,899.70 $3,033.78

4" Non-upset (Regular) - - - - - - - -

For intermediate lengths, use next longer price, plus 25%. Add 50% to the above price for all threaded tubing nipples with other than current A.P.I. specifications.For Double Extra Heavy Tubing Nipple price double the Extra Heavy Price.

TUBING NIPPLES – STANDARD WEIGHT

TUBING NIPPLES – XH WEIGHT

18" AND SHORTER – UPSET AND NON-UPSET

18" AND SHORTER – UPSET AND NON-UPSET

Discounts applicable: Grade J-55 - Following List Prices and Grade N-80 or L-80 - Following Prices plus 25%

Discounts applicable: Grade J-55 - Following List Prices and Grade N-80 or L-80 - Following Prices plus 25%




J.B. SMITH

Car

bon

Ste

elSt

ain

less

Ste

elO

il C

oun

try

OIL COUNTRY

Size O.D.

WeightPer Ft.

Steel Grade

Length-Price Add For Each

2" Addition8" 10" 12" 18" 24" 36"

41⁄2 10.50 K $453.54 $490.84 $530.10 $560.49 $658.70 $853.47 $42.36

11.60 K-N-P $483.42 $520.63 $559.31 $580.06 $684.36 $879.18 $48.55

5 11.50 K POA POA POA POA POA POA POA

13.00 K POA POA POA POA POA POA POA

15.00 K-N-P POA POA POA POA POA POA POA

18.00 N-P POA POA POA POA POA POA POA

51⁄2 14.00 K $524.32 $566.09 $620.09 $783.80 $932.10 $1,246.33 $56.13

15.50 K $531.64 $592.81 $646.54 $821.32 $979.84 $1,319.49 $52.18

17.00 K-N-P $567.68 $627.90 $694.61 $878.20 $1,070.41 $1,453.48 $58.90

20.00 N-P $544.83 $618.79 $682.76 $892.71 $1,091.36 $1,488.41 $69.39

65⁄8 20.00 K $675.60 $1,047.35 $825.83 $1,049.92 $1,274.22 $1,723.91 $69.39

24.00 K-N-P $736.98 $825.83 $959.52 $1,183.57 $1,453.66 $1,996.35 $84.13

28.00 N-P $805.29 $913.77 $1,023.24 $1,339.85 $1,658.85 $2,296.47 $81.50

7 20.00 K $793.51 $899.86 $1,007.60 $1,319.49 $1,633.58 $2,261.47 $96.24

23.00 K-N $686.72 $764.66 $846.09 $1,070.41 $1,292.95 $1,745.35 $69.39

26.00 K-N-P $736.98 $821.32 $908.74 $1,169.31 $1,425.69 $1,945.43 $81.50

29.00 N-P $783.80 $978.57 $978.60 $1,268.41 $1,550.80 $2,149.41 $90.74

75⁄8 26.40 K-N $827.26 $937.72 $1,049.92 $1,367.17 $1,696.52 $2,344.32 $100.38

29.70 N-P $825.83 $923.28 $1,023.73 $1,319.49 $1,614.84 $2,208.88 $94.96

85⁄8 24.00 K $870.74 $985.95 $1,096.63 $1,425.69 $1,757.41 $2,431.70 $104.28

32.00 K $846.09 $933.16 $1,063.02 $1,291.49 $1,559.62 $2,101.32 $84.13

36.00 K-N $972.93 $1,086.23 $1,203.75 $1,559.62 $1,920.61 $2,637.05 $109.94

44.00 N-P $1,023.93 $1,156.47 $1,288.64 $1,696.52 $2,101.32 $2,907.64 $122.47

49.00 N-P $1,204.37 $1,379.07 $1,545.01 $2,017.87 $2,503.06 $3,473.97 $133.71

95⁄8 36.00 K $1,307.82 $1,488.41 $1,653.81 $2,128.77 $2,524.98 $3,580.09 $136.40

40.00 K-N POA POA POA POA POA POA POA



103⁄4 40.50 K POA POA POA POA POA POA POA








16 75.00 K POA POA POA POA POA POA POA


For intermediate lengths, use next shorter length plus price from last column for each 2" or fraction thereof.When ordering, specify size, weight, length and threads per inch. Weights and lengths not shown are priced on application.For N-80 or L-80, add 25%.

CASING NIPPLES




J.B. SMITH

OIL COUNTRY

O.D. Size Weight Price

41⁄2 4.50 $279.85

51⁄2 9.00 $312.24

7 13.20 $616.13

85⁄8 15.00 $1,024.42

BELL NIPPLES

For sizes smaller than 2" x 2" shown above, price POA, for N-80 or L-80, add 100%.Add 50% to price for all threaded items with other than current A.P.I. thread specifications (see page 13).

SUB TUBING COUPLINGS - J-55

Size Weight Each Price Each

2 EUE x 2 Reg 5.00 $372.05

21⁄2 EUE x 2 Reg 5.00 $577.38

21⁄2 Reg x 2 EUE 5.00 $577.38

21⁄2 EUE x 2 Reg 8.00 $656.00

21⁄2 EUE x 2 EUE 8.00 $656.00

21⁄2 EUE x 21⁄2 Reg 7.00 $656.00

3 Reg x 2 Reg 11.00 $1,071.04

3 Reg x 2 EUE 11.00 $1,071.04

3 Reg x 21⁄2 Reg 10.00 $927.30

3 Reg x 21⁄2 EUE 10.00 $927.30

3 EUE x 2 Reg 15.00 $1,045.29

3 EUE x 2 EUE 14.00 $1,045.29

3 EUE x 21⁄2 Reg 16.00 $963.77

3 EUE x 21⁄2 EUE 15.00 $963.77

3 EUE x 3 Reg 13.00 $943.40

4 Reg x 3 Reg 10.00 $1,717.21

4 Reg x 3 EUE 12.00 $1,717.21

4 EUE x 3 Reg 11.00 $1,942.30

4 EUE x 3 EUE 11.00 $1,942.30

4 EUE x 4 Reg 10.00 $1,942.30




J.B. SMITH

Car

bon

Ste

elSt

ain

less

Ste

elO

il C

oun

try

OIL COUNTRY

Bevel on end: Plus 10%. Bevel two ends: Plus 20%.

API TUBING COUPLINGS

Price Each

Size Nominal (Inches)

Tubing O.D.

Non-Upset External Upset

J-55 N-80 Lbs. Per 100 J-55 N-80 L-80 Lbs. Per 100

2" 23⁄8" POA POA 282.00 POA POA POA

21⁄2" 27⁄8" POA POA 515.00 POA POA POA


31⁄2" 4" POA POA 957.00 POA POA POA


Price Each

Size Nominal (Inches)

Tubing O.D.

External Upset Lbs. Per 100

Actual O.D. InchesJ-55 N-80 L-80

2" 23⁄8" POA POA POA 240.00 2.91

21⁄2" 27⁄8" POA POA POA 348.00 3.46

3" 31⁄2" POA POA POA 540.00 4.18

SPECIAL CLEARANCE TUBING COUPLINGS

Size (Inches) O.D. Inches

Price Each

Round Thread X Sharp Thread or Comb. Thread Comb. Special Threadby Regular ThreadReg. Both Ends Eue Both Ends

2 23⁄8 $329.54 $353.46 POA

21⁄2 27⁄8 $548.45 $623.38 POA

3 31⁄2 $927.25 $943.40 POA

4 41⁄2 $1,763.81 $1,964.38 POA

For sizes smaller than 2", price $273.68.For N-80 or L-80, add 100%.V Threads are not recommended for lifting.

COMBINATION COUPLINGS - J-55




J.B. SMITH

OIL COUNTRY

Price Each

Casing O.D.(Inches)

Grade J-55 or K-55 Comb. Thread 8 Rd. X V

N-80 or L-80 Round Thread

P-110 Round Thread Lbs. Per 100

Length of Round Thd. CouplingsRound Thread 8 Round X Sj

41⁄2" POA POA – – – 805.00 61⁄4"

5" POA POA POA – – 1018.00 61⁄2"

51⁄2" POA POA POA POA – 1144.00 63⁄4"

65⁄8" POA POA POA POA – 1997.00 71⁄4"

7" POA POA POA POA – 1834.00 71⁄4"

75⁄8" POA POA POA POA – 2693.00 71⁄2"

85⁄8" POA POA POA POA POA 3558.00 73⁄4"

95⁄8" POA POA POA POA POA 3951.00 73⁄4"

103⁄4" POA POA POA POA POA 4553.00 8"

113⁄4" POA POA POA POA POA – 8"

133⁄8" POA POA POA POA POA 5623.00 8"

16" POA POA POA POA POA 7898.00 9"

20" POA POA POA POA POA 9500.00 9"

API CASING COUPLINGSSHORT THREAD

Casing O.D.(Inches)

Price EachLbs. Per 100 Length of

CouplingsJ-55 or K-55 N-80 L-80

41⁄2" POA POA POA 907.00 7"

5" POA POA POA 1256.00 73⁄4"

51⁄2" POA POA POA 1403.00 8"

65⁄8" POA POA POA 1829.00 83⁄4"

7" POA POA POA 2367.00 9"

75⁄8" POA POA POA 3423.00 91⁄4"

85⁄8" POA POA POA 4748.00 10"

95⁄8" POA POA POA 5577.00 101⁄2"

103⁄4" POA POA POA 6202.00 101⁄2"

133⁄8" POA POA POA 7663.00 101⁄2"

API CASING COUPLINGSLONG THREAD




J.B. SMITH

Car

bon

Ste

elO

il C

oun

try

Stai

nle

ss S

teel

STAINLESS STEEL

Size Length List Price1⁄4 x 1⁄8 21⁄4 POA3⁄8 x 1⁄4 21⁄2 POA1⁄2 x 1⁄4 23⁄4 POA1⁄2 x 3⁄8 23⁄4 POA3⁄4 x 1⁄4 3 POA3⁄4 x 3⁄8 3 POA3⁄4 x 1⁄2 3 POA1 x 1⁄4 31⁄2 POA1 x 1⁄2 31⁄2 POA1 x 3⁄4 31⁄2 POA

11⁄4 x 1⁄2 4 POA11⁄4 x 3⁄4 4 POA11⁄4 x 1 4 POA11⁄2 x 1⁄2 41⁄2 POA11⁄2 x 3⁄4 41⁄2 POA11⁄2 x 1 41⁄2 POA

11⁄2 x 11⁄4 41⁄2 POA2 x 1⁄2 61⁄2 POA2 x 3⁄4 61⁄2 POA

Size Length List Price

2 x 1 61⁄2 POA2 x 11⁄4 61⁄2 POA2 x 11⁄2 61⁄2 POA21⁄2 x 1 7 POA

21⁄2 x 11⁄4 7 POA21⁄2 x 11⁄2 7 POA21⁄2 x 2 7 POA3 x 1 8 POA

3 x 11⁄4 8 POA3 x 11⁄2 8 POA3 x 2 8 POA

3 x 21⁄2 8 POA4 x 1 9 POA

4 x 11⁄4 9 POA4 x 11⁄2 9 POA4 x 2 9 POA

4 x 21⁄2 9 POA4 x 3 9 POA

4 x 31⁄2 9 POA

Size Length List Price

2 x 1 61⁄2 POA2 x 11⁄4 61⁄2 POA2 x 11⁄2 61⁄2 POA21⁄2 x 1 7 POA

21⁄2 x 11⁄4 7 POA21⁄2 x 11⁄2 7 POA21⁄2 x 2 7 POA3 x 1 8 POA

3 x 11⁄4 8 POA3 x 11⁄2 8 POA3 x 2 8 POA

3 x 21⁄2 8 POA4 x 1 9 POA

4 x 11⁄4 9 POA4 x 11⁄2 9 POA4 x 2 9 POA

4 x 21⁄2 9 POA4 x 3 9 POA

4 x 31⁄2 9 POA

Other Types and Sizes on Application. For other Alloy Raw Material, call the Factory. Mill test reports furnished on request only. EXTRAS: Eccentrics - Plus 50%.

Other Types and Sizes on Application. For other Alloy Raw Material, call the Factory. Mill test reports furnished on request only. EXTRAS: Eccentrics - Plus 50%.

STAINLESS & ALLOY STEEL SWAGE NIPPLES S/40

STAINLESS & ALLOY STEEL SWAGE NIPPLES S/40

304

316

Size Length List Price1⁄4 x 1⁄8 21⁄4 POA3⁄8 x 1⁄4 21⁄2 POA1⁄2 x 1⁄4 23⁄4 POA1⁄2 x 3⁄8 23⁄4 POA3⁄4 x 1⁄4 3 POA3⁄4 x 3⁄8 3 POA3⁄4 x 1⁄2 3 POA1 x 1⁄4 31⁄2 POA1 x 1⁄2 31⁄2 POA1 x 3⁄4 31⁄2 POA

11⁄4 x 1⁄2 4 POA11⁄4 x 3⁄4 4 POA11⁄4 x 1 4 POA11⁄2 x 1⁄2 41⁄2 POA11⁄2 x 3⁄4 41⁄2 POA11⁄2 x 1 41⁄2 POA

11⁄2 x 11⁄4 41⁄2 POA2 x 1⁄2 61⁄2 POA2 x 3⁄4 61⁄2 POA


NOTES


Car

bon

Ste

elO

il C

oun

try

Stai

nle

ss S

teel

NOTES

EuropE and middlE EastTel: +31-53-5725570 • Fax: +31-53-5725579International Customer ServiceTel: +1-708-885-3000 • Fax: +1-708-534-5441

mExico, puErto rico and latin amEricaInternational Customer ServiceTel: +1-708-885-3000 • Fax: +1-708-534-5441

corporatE officEs2 Holland WayExeter, NH 03833Tel: 603-418-2800 • Fax: 603-418-2833E-mail: [email protected]

customEr sErvicE cEntErs

unitEd statEsUniversity Park, ILTel: 708-885-3000 • Fax: 708-534-5441 Toll Free: 1-800-301-2701

Irving, TXTel: 972-871-1206 • Fax: 972-641-8946 Toll Free: 1-800-451-4414

canadaSimcoe, OntarioTel: 519-426-4551 • Fax: 519-426-5509

u.s. rEGional distriBution cEntErs

univErsitY parK750 Central Avenue University Park, IL 60484

irvinG1401 Valley View Lane, Suite 150Irving, TX 75061

columBia800 Malleable RoadColumbia, PA 17512

ontario1470 S. Vintage AvenueOntario, CA 91761

Engineered Pipe SupportsCustomer Service Center160 Frenchtown RoadNorth Kingstown, RI 02852Tel: 401-886-3000 Fax: 401-886-3010Toll Free: 1-877-406-3108

anvil Eps

additional invEntorY locations*

unitEd statEs: Arizona, Colorado, Georgia, Indiana, Massachusetts, Minnesota, Missouri, New York, Tennessee, Texas, Washington and Wisconsin

intErnational: Ontario, Canada

*Inventory varies at locations

b u i l d i n g c o n n e c t i o n s t h a t l a s t

www.anvilintl.com

North Alabama PipeInnovators of Pipe Fabrication Equipment

#770 / Printed in USA / ©2013Revisions: September 3, 2013

Documents

J.B. SMITH - Amazon S3...2013/09/24 · Material Specification - WPB S9 (Line Pipe Sizes) J-55, N80, 4140, etc . (Oil Country Sizes) Raw Material Code - Each part is die stamped with