4
Jason Fong 4 Dunfries Place St. John's, NL, A1A 5A9 Home: 709-579-1664 Cell: 709-330-3613 [email protected] Experience Ozz Electric, February 2015 - Present First Year Electrical Apprentice - Follow instructions and job tasks as specified by Site Forman - Install lighting, sensors, receptacles - Completing EMT piping runs and wire pulls as specified in drawings. - Keep inventory of site materials and equipment. Clovelly Golf Course, August 2012- October 2013 and Sept 2015 - Present Events Server / Bar Tender - Greet Guest to the club - prepare table settings and hall for booked event - Communicate with guest to make their stay most enjoyable - Serve beverages and meals, in a timely and orderly fashion - Clear table's after guest has finished their meal. RDS, Exxon Mobil Hebron Project, St. John’s NL, October 2013 June 2014 Electrical Designer - Design and update project documents to clients scope - Update Cable Schedule with latest single line, block diagrams, vendor documents, tray reports and module layouts. - Design Cable routes for all electrical cables in and between the DSM and DES modules. - Design documents for specific tray fill calculations on project tray fill requirements. - Use PDMS and Navisworks to design cable routes which abide by project cable tray regulations. - Notify supervisors and necessary individuals of any inconsistencies found or necessary changes. - NOTE: These activities were completed for both Electrical and Instrumentation Teams. Karwood Contracting, June 2013 - Sept 2013 Framing / Site Coordinator - Read building plans (build walls) - Communicate with site manager and trades for accurate construction - Keep fellow co-workers on task and focused.

Jason Fong - Instrumentation Engineering Technologist update April 18

Embed Size (px)

Citation preview

Page 1: Jason Fong - Instrumentation Engineering Technologist update April 18

Jason Fong

4 Dunfries Place St. John's, NL, A1A 5A9 Home: 709-579-1664 Cell: 709-330-3613

[email protected]

Experience

Ozz Electric, February 2015 - Present

First Year Electrical Apprentice

- Follow instructions and job tasks as specified by Site Forman - Install lighting, sensors, receptacles

- Completing EMT piping runs and wire pulls as specified in drawings.

- Keep inventory of site materials and equipment.

Clovelly Golf Course, August 2012- October 2013 and Sept 2015 - Present

Events Server / Bar Tender

- Greet Guest to the club

- prepare table settings and hall for booked event - Communicate with guest to make their stay most enjoyable

- Serve beverages and meals, in a timely and orderly fashion

- Clear table's after guest has finished their meal.

RDS, Exxon Mobil Hebron Project, St. John’s NL, October 2013 – June 2014

Electrical Designer - Design and update project documents to clients scope

- Update Cable Schedule with latest single line, block diagrams, vendor documents, tray

reports and module layouts. - Design Cable routes for all electrical cables in and between the DSM and DES modules.

- Design documents for specific tray fill calculations on project tray fill requirements.

- Use PDMS and Navisworks to design cable routes which abide by project cable tray regulations. - Notify supervisors and necessary individuals of any inconsistencies found or necessary changes.

- NOTE: These activities were completed for both Electrical and Instrumentation Teams.

Karwood Contracting, June 2013 - Sept 2013

Framing / Site Coordinator - Read building plans (build walls)

- Communicate with site manager and trades for accurate construction

- Keep fellow co-workers on task and focused.

Page 2: Jason Fong - Instrumentation Engineering Technologist update April 18

Jason Fong Page 2 of 4

Education

Mississauga Training Consultants, Mississauga, ON, June 2015

Fiber Optic Technician (FOA Certified)

- Fiber repair and splicing (Mechanical, Fusion splices) - Fiber testing and troubleshooting single mode and multi mod fiber cables

(using OTDR, SM and MM light sources and power meters)

- Connector Repair and Installation

Fiber Optic Outside Plant Specialist (FOA Certified)

- Installation of Fiber Cable in an Environment (Inside, Outside, Underground, Above ground)

- Installation and maintenance of cable enclosures In and Outside.

Lakehead University, Thunderbay, ON, June 2014 - April 2015

Electrical Engineering Program

College of the North Atlantic, Ridge Road Campus, St. John's, September 2010 – April 26, 2013

Electronics Engineering Technology program (Instrumentation) Diploma (Graduate) Courses completed - Process Measurement

- Process Analysis

- Process Control - Digital Electronics and Microprocessors

- Engineering Management

- Programmable Logic Control (PLC Programming, Ladder Logic & Function Block) - Industrial Communication Systems

- Instrument Hydraulics & Pneumatics

- Analog Electronics

- AutoCAD - Electrical Machines & Devices

- Electronic / Electrical Fabrication Tech

- Engineering Graphics - DCS and SCADA Systems

- HMI Design

Memorial University of Newfoundland, St. John's, September 2007- March 2010

Completed undergraduate courses

Chemistry, Biology, Math , Marketing, Entrepreneurship, English

Page 3: Jason Fong - Instrumentation Engineering Technologist update April 18

Jason Fong Page 3 of 4

Skills Development:

IBEW Safety Training, August 2015

Confined Space, (Completed August, 2015)

Fall Arrest, (Completed Sept, 2015)

Powerline Hazards (Certified, 2015/09/12)

Worksite Safety Compliance Centre, Sept 2015

WHMIS 2015 Safety Certificate

Skills Canada, April 12, 2013

Gold Medal Finalist in the provincial mechatronics competition.

Competitor in Skills Canada National event

Emergency Response Concepts Incorporated, Sept 10, 2011

Completed Standard First Aid / CPR C/AED training

Drivers License Class 05, June 2006

Extracurricular Activities & Interest

Electronic Circuit Design, 2015 - Present

Designing MOSFET and control circuits for DC motors.

Proto Circuit Board Design (PCB)

Testing using bread boards

Competitive Hockey, 1997 - 2011

St. John's Avalon Junior B

Holy Heart Hockey team

Ontario Prep and Mid West Prep Hockey League

Alpine Skiing, 1994 - Present

Personal Enjoyment / Extreme skiing

Slalom Waterskiing, 2000 - Present

Summer Hobby

Music, 2001 - Present

Acoustic Guitar, 2007 - Present

Mountain Biking, 1999 - Present

All mountain, XC and downhill riding

Page 4: Jason Fong - Instrumentation Engineering Technologist update April 18

Jason Fong Page 4 of 4

References

Joe Penney

Electrical Lead Hand

Ozz Electric

1 Lushes Road

CBS, NL

A1X-4C7

[email protected]

Home: (709) 744-1109

Personal Cell: (709) 769-0389

Greg Lynch

Electrical Discipline, Technical Services Group

Suncore Energy Inc

E&P- East Coast Canada

235 Water Street Suite 201,

St. John’s, NL

A1C 1B6

(W): (709) 778-3576

E-mail: [email protected]

Gerry Tulk

Instructor

Electronic/Electrical Engineering Technologies

College of the North Atlantic

Engineering Technology Center

Ridge Road Campus

P.O.Box 1693

St. John’s, NL

A1C-5P7

E-Mail [email protected]

Ph.# 758-7581

Contact Information

Jason Fong 4 Dunfries Place

St. John's, NL A1A 5A9

Home Phone #: (709) 579 -1664

Cell Phone #: (709) 330-3613

[email protected]