Upload
lamdiep
View
222
Download
1
Embed Size (px)
Citation preview
85
Jacks & CouplersJacks & Couplers
MOUNTING PLATES
Part # Description Mfg. #
18-292 Atwood Weld-On Mounting Bracket 87501
18-445 Swivel Jack Snap RIng 015904
Part # Description Mfg. #
18-291 Atwood Bolt-On Mounting Bracket 81412
Note: May also work with other side mount jacks (i.e. 18-440 on page #59 )
Used with Atwood Jack #’s 18-295 & 18-298 (see previous section)
Used with Atwood Jack #’s 18-295 & 18-298 (see previous section)
ATWOOD STABILIZER JACKS
Part # Description Mfg. #
18-281 Atwood Stabilizer Jack (17.75” Extended) 82301
18-281-1 Atwood Stabilizer Jack (21.75” Extended) 82297
18-281-JR Jack Rod for Atwood Stabilizer Jack 80480
18-281-P Jack Foot for Atwood Stabilizer Jack
18-82300 Atwood Stabilizer Jack (retracted height 11”) QT 82300
Part # Description Mfg. #
18-282 Scissor Jack, 5K (24” Extended) 5740-24
18-282-H Handle for Scissor Jack 5740H-24
18-TJ01 Domar Stabillizer Jack
- Lifts 650 lbs. / Holds 1000 lbs.
- Retracted - 11.5”
- Swing away storage
- Jack Rod Not Included
Jacks &
Couple
rs
Part # Description Mfg. #
18-430 Weld-on Gear Box Only 018161
Welds to side and bottom of tongue. For use with rack and wheel 18-403 (see page # 84)
Part # Description Mfg. #
18-298 Atwood Side Crank, Swivel Jack w/Wheel (500lbs) (Refer to Appendix) 87535
18-295 Atwood Top Crank, Swivel Jack w/Wheel (500lbs) (Refer to Appendix) 80043
Atwood Bolt Swivel Jacks are designed to allow the jack tube to swing easily from its hori-
zontal transit position to the vertical stationery position, locking securely into place with a solid ½"
diameter spring-loaded pin. The bolt design of the swivel firmly holds the jack against the mounting
bracket, substantially reducing the side-to-side wobble and virtually eliminating the annoying chatter
during travel.
Requires either mounting bracket 18-292 or 18-291 (see next section)
SIDE MOUNT JACKS
Picture not available.
86
Jacks & CouplersJacks & Couplers
Part # Description Mfg. #
18-280 Deluxe Power Jack - 2500 lbs capacity (Refer to Appendix) 80515
18-279 Heavy Duty Power Jack - 3500 lbs capacity 80530
18-275 Heavy Duty Power Jack - 2,500 lbs capacity, 14.24” Travel (Ext. 10” min)
Part # Description Mfg. #
19-906 Bulldog 7K Side Wind Jack w/Drop Foot - 15” Drop (Refer to Appendix) 190754
19-906-I 7K RAM Side Wind Square Jack w/ Drop Foot TJD-7000S19-907 Bulldog 7K Top Wind Jack w/Drop Foot - 15” Drop (Refer to Appendix) 190704
19-907-B Buyers 7K Top Wind Jack w/Drop Foot - 15” Drop 0091310
19-907-I 7K RAM Top Wind Square Jack w/Drop Foot TJD-700019-900 Bulldog 8K Side Wind Jack w/Drop Foot - 15” Drop (Refer to Appendix) 190510
19-900-S 8K Shelby Side Wind Drop Leg Jack 6108SW-2419-901 Bulldog 8K Top Wind Jack w/Drop Foot - 15” Drop (Refer to Appendix) 190500
19-901-S 8K Shelby Top Wind Drop Leg Jack 6108TW-2419-906-B Buyers 7K Side Wind Jack w/ Drop Foot - 15” Drop 0091340
Replacement Parts19-915 Side Wind Handle Kit Only 500171
19-916 Top Wind Handle Kit Only 500148
19-917 Inner Leg Only 700510
19-918 Side WInd Replacement Gear Kit 500156
19-919 Top WInd Replacement Gear Kit 500224
19-921 9/16” Replacement Pin Only 700263
Features
The Deluxe Power Jack eliminates the need for hand cranking to position a trailer. Tt fits most 2
5/16” couplers and has a lifting capacity of 2,500 lbs. It also includes a courtesy light to ease hooking
a unhooking in the dark, and a manual override with handle that is accessible without
removing the cover.
Features
Heavy gauge 2.5" square tubing for direct weld mounting
Zinc plated inner tube and drop leg ~ Zero water retention base
Use the painted outer tube as the final finish or primer
Oil impregnated bushing for improved bearing and gear life
POWER JACK
DROP LEG SPEED JACK
Part # Description Mfg. #
19-920 12K - 35K Side Wind Drop Leg Speed Jack SJ-1000
DROP LEG JACK
Jacks &
Couple
rs
87
Jacks & CouplersJacks & Couplers
DROP LEG JACK
Part # Description Mfg. #
19-908 10K Side Wind Jack w/Drop Foot - 15” Drop (Refer to Appendix 180455
19-909 10K Top Wind Jack w/Drop Foot - 15” Drop (Refer to Appendix) 180354
BULLDOG’S 10,000 lbs. support capacity square jack “fills the gap” between 8,000 lbs. and
12,000 lbs. current square jack product offerings. Heavy gauge 3" square tubing allows for direct
weld mounting wherever the application allows. Zinc plated inner tube and drop leg. Heavy duty
base, with reinforcement ribs. Precision manufactured for long term reliability and smooth, easy
cranking. Lift Capacity: 7,200 lbs. Static Load: 10,000 lbs.
Part # Description Mfg. #
19-910 Drop Leg Jack with Handle, Standard (12K)19-912 Drop Leg Jack Only, Standard (12K) (Refer to Appendix) 182400
19-912-1 Drop Leg Jack Only, Spring Loaded (12K) 190800
19-601 Crank Hanger Only XB-LG008519-602 Handle Only 15181
19-912-15 Side Pin Drop Leg Jack, Spring Loaded 182800
19-912-H Replacement Handle for 19-910
19-912-3 Jack Only
Features
4" square tubing, 7 gauge superior alloy steel. Painted outer tube, inner tube, and drop leg
Drop leg option with 5 positioning holes. Spring return drop leg or non-spring return drop leg.
12.5" screw travel, 13.5" of additional adjustment with drop leg. Front facing drop leg plunger pin.
Lift Capacity: 10,000lbs. Static Load: 12,000 lbs.
Part # Description Mfg. #
19-912-E 12K Eclipse/Bulldog Engineered Jack, Non-Spring Return 140098037619-912-1E 12K Eclipse/Bulldog Engineered Jack, Spring Return Front Pin 1400950376
The electric motor kit works on 2-speed jacks with small planetary gear box. It also works on
Bulldog single speed jacks.
Part # Description Mfg. #
19-912-M Add-on Electric Motor Kit 1824200100
Jacks &
Couple
rs
88
Jacks & CouplersJacks & Couplers
DROP LEG JACKS
Part # Description Mfg. #
19-550 Drop Leg Jack Only, Standard T12FP
19-551 Drop Leg Jack Only, Standard - NO PAINT T12FP-NP
19-551-2 Drop Leg Jack with H&H, Standard
19-555 Drop Leg Jack Only, Spring Loaded T12FPSL
19-555-2 Drop Leg Jack with HDL & HGR, Spring Loaded
19-555-SP-1 Drop Leg Jack Side-Pin
19-556 Drop Leg Jack Only, Spring Loaded - NO PAINT T12FPSL-NP
19-556-1 Drop Leg Jack with HDL, Spring Loaded
19-557 TEM Handle Only - w/Nipple HWN-7P
19-558 TEM Handle Only - Standard HWON-7P
19-560 TEM Handle Hanger Only CK04300
TEM jacks are designed with 1.5 to 1 gear ratio, welded bans on drop leg to prevent jack
lean and drop-leg from falling out, and a thick sand plate to give added load bearing stability. 27”
retracted, 12” of extension (12” additional foot extension).
Lift Capacity: 12,000 lbs. Static Load: 15,000 lbs.
Part # Description Mfg. #
19-570 Jack w/ Handle, Spring Loaded, (12K) TJD10000SP-F19-571 Jack w/ Handle, Standard, (12K) TJD10000-F
Part # Description Mfg. #
19-926 12K 2-Speed Planetary Drop Leg Jack - Standard (small gear box) 183416
19-926-1 12K 2-Speed Planetary Drop Leg Jack - Spring Loaded (small gear box) 183816
19-925 12K 2-Speed Traditional Drop Leg Jack - Standard 183901
19-925-1 12K 2-Speed Traditional Drop Leg Jack - Spring Loaded 183903
BULLDOG’s 2-speed, 12,000 lbs. support capacity square jack makes cranking easier when
fully loaded and faster when unloaded. In low gear, the ratio delivers full lifting power at a super-
smooth, easy-lifting 27.7 turns per 1” of travel. In high gear, the cranking ratio is a speedy 9 turns
per 1” of travel, the fastest in its weight class. This unit can be either used as a single jack unit or
mated with a 1-speed (slave) Bulldog jack for the added stability of a tandem jack system.
DROP LEG JACKS
Part # Description Mfg. #
19-927 Special Handle for 2-Speed Bulldog Jack - Removable 701466
Jacks &
Couple
rs
89
Jacks & CouplersJacks & Couplers
Part # Description Mfg. #
19-600 Drop Leg Jack with HDL, Standard
19-600-1 Drop Leg Jack with HDL, Spring Loaded
19-600-2 Drop Leg Jack with HDL, Standard
19-600-3 Drop Leg Jack with HDL, Spring Loaded
19-603 Drop Leg Jack Only, Standard (10K) LG8700-31
19-603-1 Drop Leg Jack Only, Spring Loaded (10K) LG8700-313072
19-601 Crank Hanger Only XB-LG0085
19-602 Handle Only LG0083-01
19-605-1 Drop Leg Jack with HDL & HGR, Spring Loaded
19-605-2 Drop Leg Jack with HDL & HGR, Standard
19-605-4 Drop Leg Jack No Paint, Spring Loaded
19-607 Miter Gear - w/Hub LG1495-01
19-607-1 Thrust Bearing PP0013-07
19-606 Miter Gear - No Hub LG1494-01
19-190758 Drop Leg Jack Sidewind – Swivel Mount (15” Travel) (8K) 190758
19-912 Drop Leg JackNon-Spring Return Sidewind (12.5” Travel) (12K) 182415
19-912-1 Drop Leg JackSpring Return Sidewind (12.5” Travel) (12K) 182815
19-650-1 Drop Leg JackDual Pin Spring Loaded (12” Travel) (12.5K - 20K Static) LGD700-213
Lift Capacity: 10,000lbs. Static Load: 12,000 lbs.
Travel: 13.5" / Drop: 12" / Total Travel: 25.5"
Retracted: 24.375" / Extended: 49.875"
DROP LEG JACKS
Part # Description Mfg. #
19-650 Dual Pin Drop Leg Jack Only, Standard (12.5K)(Refer to Appendix) LGD700-212072
19-650-1 Dual Pin Drop Leg Jack Only, Spring Loaded (12.5K) LGD700-213072
19-651-1 Dual Pin Drop Leg Jack with HDL, Spring Loaded
19-602 Handle Only LG0083-01
19-606 Miter Gear - No Hub LG1494-01
Lift Capacity: 12,500lbs. Static Load: 20,000 lbs.
Travel: 12" / Drop: 14" / Total Travel: 26"
Retracted: 24.375" / Extended: 50.375"
Part # Description Mfg. #
19-641 Heavy Duty 2-Speed Drop Leg Jack Only LG4700-324
19-641-1 Heavy Duty 2-Speed Drop Leg Jack with HDL & HGR
19-642 Heavy Duty 1-Speed Drop Leg Jack Only LG4700-314
19-LGC001-71 LGC Model Heavy Duty 1-Speed Drop Leg Jack Only LGC001-71
19-LGC001-72 LGC Model Heavy Duty 2-Speed Drop Leg Jack Only LGC001-72
19-602 Handle Only LG0083-01
19-810-3 Cross Bar Only LG0094-6825
19-640 Complete Jack Set
19-LGC001-SET LGC Model Complete Jack Set
Includes:
(1) 19-641 Jack, (1) 19-642 Jack, (1) 19-602 Handle, & (1) 19-810-3 Cross Bar
19-LG4700-30 Slave and 2-Speed with Cross Shaft LG4700-30
19-LG4700-31 Slave Only with Handle LG4700-31
19-LG4700-32 2-Speed Only with Handl LG4700-32
LG400C70000078 Slave and 2-Speed with Cross Shaft – 10” Round Foot LG400C70000078LG4001700000078 Slave and 2-Speed with Cross Shaft – 10”X10” Square Foot LG400170000007819-LGS-5A105 Mark V Slave and 2-Speed with Cross Shaft LGS-5A105
19-643 Mark V LGS-3A115
Lift Capacity: 35,000lbs. Static Load: 35,000 lbs.
Travel: 13.5" / Drop: 12" / Total Travel: 25.5"
Retracted: 26.75" / Extended: 52.25"
Jacks &
Couple
rs
90
Jacks & CouplersJacks & Couplers
Part # Description Mfg. #
19-554 Drop Leg Jack, Top Crank TC-10
19-554-1 Drop Leg Jack, Top Crank (New Style Crank) TFG/NTC10
Features
Heavy duty roller bearings
Bronze bushings on shaft and screw
Lockout pull pin for easy dropfoot retraction
5 position dropfoot
Collapsed: 27” / Extended: 47” / Total Travel: 20”
Lift Capacity: 10,000 lbs. Static Load: 15,000 lbs.
Part # Description Mfg. #
19-912-TW Top Crank Drop-Leg Jack (Non-Spring Loaded. Includes Handle.) 182304
(Refer to Appendix) 19-911 Replacement Handle 800075
A BULLDOG topwind jack is an excellent choice for trailers that lack room for a side-
mounted crank.
Lift Capacity: 10,000 lbs. Static Load: 12,000 lbs
DROP LEG JACK ACCESSORIES
Part # Description Mfg. #
19-557 TEM Jack Handle (with nipple) HWN-7
19-558 TEM Jack Handle (without nipple) HWON-7
19-602 Binkley Jack Handle
19-601 Jack Handle Hanger
19-810-3 Cross Bar - 65” Length (used with tandem jack set-up)
TOP WIND DROP LEG JACK
Jacks &
Couple
rs
Part # Description Mfg. #
19-830 Atwood DuraLeg Electric Power Jack, Single, with Switch 66038
19-830-1 Atwood DuraLeg Electric Power Jack, Single, with Controls 66369
19-830-2 Atwood DuraLeg Electric Power Jack, Double, with Controls 66370
Designed for use with gooseneck trailers. 10,000 lift capacity. Extend and lift time is a little
over a minute (about 70 seconds) while retract time is a little less than a minute (about 57 seconds).
Two (2) year limited warranty. The electro-mechanical design has been time-tested for reliability.
The inner leg can extend up to 22”.
DROP LEG JACKS
Part # Description Mfg. #
19-812 Crank Extension Pipe (1 1/4” x 42”) P-8900
19-813 Crank Extension Sleeve (1 1/2” x 2”) P-7100
91
Jacks & CouplersJacks & Couplers
Jacks &
Couple
rs
Part # Description For Jack # Mfg. #
94-90-269 Cap 18-299, 18-263, 98-90-098, 18-262
18-262-B Plate 98-90-098, 18-262
05-18-002 Handle 18-264
18-299-H Handle 18-299, 18-263
05-18-003 Handle 98-90-098, 18-262
000-18-019 Gear 18-299, 18-263
000-18-018 Gear 98-90-098, 18-262
18-299-A Bearing 18-299, 18-263
18-299-PP Lock 18-264, 18-299, 18-263
18-262-PP Lock 98-90-098, 18-262
18-299-W Wheel 18-264, 18-299, 18-263
05-18-007 Wheel 98-90-098
98-90-098-W Wheel 18-262
18-299-B Fixation Pieces 18-264, 18-299, 18-263, 98-90-098, 18-262
18-445 Retention Spring 18-264, 18-299
JACK REPLACEMENT PARTS
Part # Description For Jack # Mfg. #
N/A Cap 18-303-1, 18-459, 18-326, 18-440-5, 18-450-5
18-441-1 Handle 18-303-1, 18-459, 18-326
05-18-002 Handle 18-440-5, 18-450-5
20-622 Mounting Bracket 18-440-5, 18-450-5
19-921-C Pin & Chain - 18-440-5, 18-450-5
Part # Description For Jack # Mfg. #
94-90-269 Cap 18-303-15, 18-448, 18-448-1, 18-448-8
18-451 Handle 18-303-15, 18-448
19-914 Handle 18-448-1, 18-448-8
19-918-1 Gear 18-303-15, 18-448, 18-448-1, 18-448-8
20-622 Mounting Bracket 18-448-8
19-921-C Pin & Chain 18-448-8
Part # Description For Jack # Mfg. #
99-18-007 Cap 20-685
99-1912-G Gear 20-685
N/A Support N/A
N/A Bearing N/A
N/A Shaft N/A
19-912-H Handle 20-685
Part # Description For Jack # Mfg. #
05-19-001 Cap 19-906
19-942 Gear 19-906
19-914 Handle 18-448-1, 18-448-8
N/A Support N/A
05-18-006 Bearing 000-18-002
19-921 Pin 19-906, 19-907
05-18-008 Foot 19-906, 19-907
05-18-02 Handle 000-18-002
19-915 Handle 19-906
19-916 Handle 19-907