Tannoy United KingdomTannoy North AmericaTannoy DeutschlandTannoy France

T: 00 44 (0) 1236 420199T: 00 1 (519) 745 1158T: 00 49 (180) 1111 881T: 00 33 (0)1 7036 7473

E: enquiries@tannoy.comE: inquiries@tannoyna.comE: anfragen@tannoy.comE: ventes@tannoy.com

iw6 TDC

Tannoy adopts a policy of continuous improvement and product specification is subject to change iW62TDC data file issue:1.06 // 15.01.08

The iw6 TDC is a full bandwidth in wall speaker system, using a 165mm (6.50") TannoyDual Concentric™ point source, constant directivity drive unit with an additional 25mm(1.00") Tannoy SuperTweeter™. Designed primarily for installation into standard studpartition wall systems, it may also be used in cavity wall installations constructed withstandard thickness drywall as well as a wide range of other wall construction types with asurface thickness of up to 25mm (1.00”).

High power handling and 91dB efficiency ensure this compact unit is ideally suited toapplications requiring the combination of premium sonic quality for music and speechreinforcement and exceptional reliability and intelligibility.

The 165mm (6.50") Tannoy Dual Concentric™ drive unit comprises a multi fibre paperpulp mid bass cone and a 25mm (1.00") ferrofluid cooled, titanium dome HF unit withneodymium magnet system. The mid-bass and tweeter sections of this constant directivitydriver are coincidentally aligned to a true point source; ensuring a wide and controlleddispersion for optimum coverage; this while avoiding the massive loss of energy, in thevertical plane at the crossover frequency, inherent in two-way discrete designs.

The addition of a 25mm (1.00") titanium dome SuperTweeter™ extends the frequencybandwidth out to over 50kHz, further enhancing the already class leading, low distortionperformance of the iw6 TDC with an exceptionally natural and open soundstage. The iw6TDC is also equipped with dynamic high frequency protection.

The drivers and passive frequency dividing network are mounted in an injection moulded,paintable front baffle manufactured from UV/weather resistant UL94V-0 ABS material.The class leading performance is further enhanced by the inclusion of six self aligning,spring loaded clamps; allowing for quick install but also for simple removal or reorientationof the loudspeaker. The rigidity of the clamps and baffle combination crucially provides theacoustically optimum bond to the wall surface without risk of distortion to the baffle itself.Gold plated spring loaded terminals are provided for ease of installation and a steel backcan is available as an optional installation accessory.

Complementing any style of decor, the perforated metal grille and discreet moulded bafflecan be painted to blend seamlessly with any environment.

Product Description• Extended frequency response and very low distortion• Wide, controlled constant directivity dispersion foroptimum coverage

• Does not suffer from massive loss of energy in thevertical plane at crossover caused by two waydiscrete designs

• UV/weather resistant UL94V-0 ABS construction forstructural integrity

• Dynamic high frequency protection• Six way self-aligning mounting system• Ferrofluid cooled neodymium high frequency driver• Five year warranty

• Foreground music and paging systems• Multi-room audio systems• Home theatre• Business music systems• Boardrooms and offices• Retail environments• Retail outlets and shopping malls• Lounges and bars• Cruise ships• Courtrooms

Features

Applications

Tannoy United KingdomTannoy North AmericaTannoy DeutschlandTannoy France

T: 00 44 (0) 1236 420199T: 00 1 (519) 745 1158T: 00 49 (180) 1111 881T: 00 33 (0)1 7036 7473

E: enquiries@tannoy.comE: inquiries@tannoyna.comE: anfragen@tannoy.comE: ventes@tannoy.com

iw6 TDC

Tannoy adopts a policy of continuous improvement and product specification is subject to change iW62TDC data file issue:1.06 // 15.01.08

TECHNICAL SPECIFICATIONS

Frequency Response (-3dB) (1) 75Hz - 51kHz

Frequency Range (-10dB) (1) 36Hz - 54kHz

System Sensitivity (1W @1m) (2) 91dB (1W - 2.83V for 8 Ohms)

Nominal Coverage Angle 90 degrees conical

Coverage Angle (1kHz to 6kHz) 110 degree conical

Directivity Factor (Q) 5.6 averaged 1kHz to 6kHz

Directivity Index (DI) 6.5 averaged 1kHz to 6kHz

Rated Maximum SPL (3)

Average 110.5dBAverage 109dB (with optional THP60 transformer)Peak 116.5dB

Power HandlingAverage 90WProgramme 180WPeak 360W

Recommended Amplifier Power 180W @ 8 Ohms

Nominal Impedance 8 Ohms

Distortion

10% Full Power (5.5V) 2nd Harmonic 3rd Harmonic250Hz 2.00% 0.12%1kHz 0.33% 0.68%10kHz 0.67% 0.21%

1% Full Power (1.73V) 2nd Harmonic 3rd Harmonic250Hz 0.57% 0.14%1kHz 0.08% 0.28%10kHz 0.27% 0.3%

Crossover 1.8Hz, 16Hz

Notes:(1) Average over stated bandwidth. Measured at 1 metre on axis.(2) Unweighted pink noise input, measured at 1 metre in an anechoic chamber

A full range of measurements, performance data, CLF and Ease™ Data can bedownloaded from www.tannoy.com

Full independent verification of published specifications carried out by NWAA Labs,California can also be obtained from the downloads section of www.tannoy.com

Tannoy operates a policy of continuous research and development. The introductionof new materials or manufacturing methods will always equal or exceed thepublished specifications, which Tannoy reserves the right to alter without priornotice. Please verify the latest specifications when dealing with critical applications.

Dual Concentric™ Point source, constant directivity driverLow Frequency 1 x 165mm (6.50”)

High Frequency 19mm (0.75”) titanium dome with neodymiummagnet system

Supertweeter™ 19mm (0.75”) titanium dome with neodymiummagnet system

Physical

Construction Baffle UL 94V-0 rated ABSGrille Steel, with weather resistant coatingBack can Zinc plated steel (optional accessory)

Clamping Design Six way, self aligning security toggle clamp system

Connectors Gold plated connectors with spring terminals

Hole Cutout Size 271.50 x 168.50mm (10.70 x 6.63”)Maximum wall thickness - 25mm (1.00”)

DimensionsFront baffle 320 x 209 x 104mm (12.60 x 8.23”) (H x W)

Front of baffle to rear 104mm (4.10”)of magnet assembly

Front of wall to rear 99mm (3.90”)of magnet assembly

Net Weight 3kg (6lbs 6oz)

Included Accessories Paint mask, cutout template, grille

Optional Accessories Steel back canSteel back can with THP60 transformerPlaster (mud) ring

Transformer Taps (optional)70V 60W / 30W / 15W / 7.5W / OFF & Low Impedence operation100V 60W / 30W / 15W / OFF & Low Impedence operation

System iw6 TDC Transducers

8000 3770 iw62 TDC White 1

PART NUMBER PACKED QUANTITYCOLOURMODEL NAME

Ordering Information

Tannoy United KingdomTannoy North AmericaTannoy DeutschlandTannoy France

T: 00 44 (0) 1236 420199T: 00 1 (519) 745 1158T: 00 49 (180) 1111 881T: 00 33 (0)1 7036 7473

E: enquiries@tannoy.comE: inquiries@tannoyna.comE: anfragen@tannoy.comE: ventes@tannoy.com

iw6 TDC

Tannoy adopts a policy of continuous improvement and product specification is subject to change iW62TDC data file issue:1.06 // 15.01.08

PERFORMANCE MEASUREMENTS

q y p

50

60

70

80

90

100

10 100 1000 10000 100000

0

5

10

15

20

25

30

35

40

45

1 10 100 1000 10000 100000

50

60

70

80

90

100

10 100 1000 10000 100000

0 deg10 deg20deg30deg40deg

ANECHOICFREQUENCYRESPONSE

IMPEDANCE

OFF AXISRESPONSE

1m on-axis frequency response

frequency (Hz)

SPL,1W

/1m(dB)

frequency (Hz)

Impedance vs frequency

frequency (Hz)

Impedance(ohms)

Level(dB)

Horizontal off-axis response

Tannoy United KingdomTannoy North AmericaTannoy DeutschlandTannoy France

T: 00 44 (0) 1236 420199T: 00 1 (519) 745 1158T: 00 49 (180) 1111 881T: 00 33 (0)1 7036 7473

E: enquiries@tannoy.comE: inquiries@tannoyna.comE: anfragen@tannoy.comE: ventes@tannoy.com

iw6 TDC

Tannoy adopts a policy of continuous improvement and product specification is subject to change iW62TDC data file issue:1.06 // 15.01.08

PERFORMANCE MEASUREMENTS

0

30

60

90

120

150

180

210

240

270

300

330

360

100 1000 10000

1

10

100

100 1000 10000

Q

BEAMWIDTH

DIRECTIVITY INDEX

Beamwidth vs Frequency

frequency (Hz)

frequency (Hz)

DI vs Frequency

Q

Degrees

Tannoy United KingdomTannoy North AmericaTannoy DeutschlandTannoy France

T: 00 44 (0) 1236 420199T: 00 1 (519) 745 1158T: 00 49 (180) 1111 881T: 00 33 (0)1 7036 7473

E: enquiries@tannoy.comE: inquiries@tannoyna.comE: anfragen@tannoy.comE: ventes@tannoy.com

iw6 TDC

Tannoy adopts a policy of continuous improvement and product specification is subject to change iW62TDC data file issue:1.06 // 15.01.08

PERFORMANCE MEASUREMENTS POLAR PLOTS (1/3 OCTAVE)

-48

-36

-24

-12

0

0

30

60

90270

300

330

100 Hz125 Hz160 Hz200 Hz

-48

-36

-24

-12

0

0

30

60

90270

300

330

250 Hz315 Hz400 Hz500 Hz

-48

-36

-24

-12

0

0

30

60

90270

300

330

-48

-36

-24

-12

0

0

30

60

90270

300

330

-48

-36

-24

-12

0

0

30

60

90270

300

330

-48

-36

-24

-12

0

0

30

60

90270

300

330

630 Hz800 Hz1 kHz1.25 kHz

1.6 kHz2 kHz2.5 kHz3.15 kHz

4 kHz5 kHz6.3 kHz8 kHz

10 kHz12.5 kHz16 kHz20 kHz

1.6 kHz2 kHz2.5 kHz3.15 kHz

630 Hz800 Hz1 kHz1.25 kHz

Tannoy United KingdomTannoy North AmericaTannoy DeutschlandTannoy France

T: 00 44 (0) 1236 420199T: 00 1 (519) 745 1158T: 00 49 (180) 1111 881T: 00 33 (0)1 7036 7473

E: enquiries@tannoy.comE: inquiries@tannoyna.comE: anfragen@tannoy.comE: ventes@tannoy.com

iw6 TDC

Tannoy adopts a policy of continuous improvement and product specification is subject to change iW62TDC data file issue:1.06 // 15.01.08

-48

-36

-24

-12

0

0

30

60

90270

300

330

-48

-36

-24

-12

0

0

30

60

90270

300

330

-48

-36

-24

-12

0

0

30

60

90270

300

330

-48

-36

-24

-12

0

0

30

60

90270

300

330

-48

-36

-24

-12

0

0

30

60

90270

300

330

-48

-36

-24

-12

0

0

30

60

90270

300

330

4 kHz5 kHz6.3 kHz8 kHz

10 kHz12.5 kHz16 kHz20 kHz

1.6 kHz2 kHz2.5 kHz3.15 kHz

630 Hz800 Hz1 kHz1.25 kHz

100 Hz125 Hz160 Hz200 Hz

250 Hz315 Hz400 Hz500 Hz

PERFORMANCE MEASUREMENTS POLAR PLOTS (1/3 OCTAVE)

1.6 kHz2 kHz2.5 kHz3.15 kHz

630 Hz800 Hz1 kHz1.25 kHz

Tannoy United KingdomTannoy North AmericaTannoy DeutschlandTannoy France

T: 00 44 (0) 1236 420199T: 00 1 (519) 745 1158T: 00 49 (180) 1111 881T: 00 33 (0)1 7036 7473

E: enquiries@tannoy.comE: inquiries@tannoyna.comE: anfragen@tannoy.comE: ventes@tannoy.com

iw6 TDC

Tannoy adopts a policy of continuous improvement and product specification is subject to change iW62TDC data file issue:1.06 // 15.01.08

DIMENSIONAL SKETCHES

251.0

103.8

98.94.9

271.5

209.0

320.0

168.5 iw6 TDC - POST-INSTALLATION

209.0

320.0

98.94.9

103.8

168.5

271.5

337.0

iw6 TDC - PRE-INSTALLATION

i

320.0mm12.60”

4.9mm3.89”

99.0mm3.90”

271.5mm10.69”

337.0mm13.27”

168.5mm6.63”

iw6 TDC - PRE-INSTALLATION

209.0mm8.25”

320.0mm12.60”

4.9mm3.89”

98.9mm0.19”

103.8mm4.09”

271.5mm10.69”

251.0mm9.88”

168.5mm6.63”

iw6 TDC - POST-INSTALLATION

209.0mm8.23”

104mm4.10”

INWALL BACK CAN ACCESSORY

Ordering Information

BACK CAN FITTED IN STUD PARTITONBACK CAN FITTED IN STUD PARTITON

STUDSTUD WALL COVERING MATERIALWALL COVERING MATERIALFITTED AFTER BACK CAN HASFITTED AFTER BACK CAN HASBEEN INSTALLED IN POSITION.BEEN INSTALLED IN POSITION.

451.0451.0[17.76"][17.76"]

180.0180.0[7.09"][7.09"]

281.0281.0[11.06"][11.06"]

477.0477.0[18.78"][18.78"]

420.0420.0[16.54"][16.54"]

310.0310.0[12.20"][12.20"]

89.189.1[3.51"][3.51"]

12.5 min12.5 min[0.49"min][0.49"min]

101.6 min101.6 min[4.00"min][4.00"min]

96.796.7[3.81"][3.81"]

TOPTOP

8000 4020 iw6 TDC/DS Back Can Unpainted Steel 1 4.00Kgs (8.80lbs)8000 4230 iw6 TDC/DS Transformer Back Can Unpainted Steel 1 11.00Kgs (23.1lbs)8000 4250 Pre-install mounting ring for iw6 TDC/TS - - -

PACKEDWEIGHT

PACKEDQUANTITY

BAFFLE / GRILLECOLOUR

MODEL NAMEPART NUMBER

Tannoy adopts a policy of continuous improvement and product specification is subject to change

Tannoy United KingdomTannoy North AmericaTannoy DeutschlandTannoy France

T: 00 44 (0) 1236 420199T: 00 1 (519) 745 1158T: 00 49 (180) 1111 881T: 00 33 (0)1 7036 7473

E: enquiries@tannoy.comE: inquiries@tannoyna.comE: anfragen@tannoy.comE: ventes@tannoy.com

iw6 TDC

Tannoy adopts a policy of continuous improvement and product specification is subject to change iW62TDC data file issue:1.06 // 15.01.08

The in wall speaker shall consist of one 165mm (6.50") Dual Concentric™ transducer and one 25mm (1.00”) Supertweter™ mounted in an injection mouldedfront baffle manufactured from UV/weather resistant UL94V-0 ABS material. The three-way system shall incorporate an optimised low loss crossovernetwork. The wiring terminals shall be gold plated spring loaded connectors. Performance of the in wall speaker shall meet or exceed the following criteria:The system shall have a coverage angle of 110 degrees (1kHz to 6kHz). Frequency response measured on axis shall be 36Hz - 54kHz (-10dB from ratedsensitivity, measured in an IEC baffle in an anechoic chamber) with no equalization. Sensitivity shall be 91dB (1W @ 1m). Long term power handlingcapacity as defined in EIA-426B test shall be 90W, recommended amplifier power 180W @ 8 Ohms. The nominal system impedance shall be 8 Ohms.

In 70V or 100V distributed audio systems the iw6 TDC can be used with the optional the THP60 high performance, low insertion loss transformer with 60,30, 15 and 7.5W taps* available.

A weather resistant perforated steel grille covers the transducer. Both the grille and baffle shall be paintable. The system shall not exceed the followingdimensions: 320 x 209 x 104mm or 12.60 x 8.23 x 4.10” (H x W x D).Hole cutout size shall be 271.50 x 168.50mm or 10.71 x 6.63".

The in wall speaker system shall be the.....iw6 TDC.

*70.7 Volt only

Architectural specifications

Tannoy United KingdomTannoy North AmericaTannoy DeutschlandTannoy France

T: 00 44 (0) 1236 420199T: 00 1 (519) 745 1158T: 00 49 (180) 1111 881T: 00 33 (0)1 7036 7473

E: enquiries@tannoy.comE: inquiries@tannoyna.comE: anfragen@tannoy.comE: ventes@tannoy.com

iw6 TDC

Tannoy adopts a policy of continuous improvement and product specification is subject to change iW62TDC data file issue:1.06 // 15.01.08

NOTES