iVMS-2000 - VideoWave HA Series/iVMS... · 2011. 6. 17. · iVMS-2000 Hybrid PC-DVR Software Quick Start Guide V2.0.1 Hangzhou Hikvision Digital Technology Co., Ltd

iVMS-2000

Hybrid PC-DVR Software

Quick Start Guide

V2.0.1

Hangzhou Hikvision Digital Technology Co., Ltd.

iVMS-2000 Quick Start Guide

© 2006-2010 by HIKVISION. All rights reserved.

Notices

The information in this documentation is subject to change without notice and does

not represent any commitment on behalf of HIKVISION. HIKVISION disclaims any

liability whatsoever for incorrect data that may appear in this documentation. The

product(s) described in this documentation are furnished subject to a license and

may only be used in accordance with the terms and conditions of such license.

Copyright © 2006-2010 by HIKVISION. All rights reserved.

This documentation is issued in strict confidence and is to be used only for

the purposes for which it is supplied. It may not be reproduced in whole or in

part, in any form, or by any means or be used for any other purpose without prior

written consent of HIKVISION and then only on the condition that this notice is

included in any such reproduction. No information as to the contents or subject

matter of this documentation, or any part thereof, or arising directly or indirectly

therefrom, shall be given orally or in writing or shall be communicated in any

manner whatsoever to any third party being an individual, firm, or company or any

employee thereof without the prior written consent of HIKVISION. Use of this

product is subject to acceptance of the HIKVISION agreement required to use this

product. HIKVISION reserves the right to make changes to its products as

circumstances may warrant, without notice.

This documentation is provided “as-is,” without warranty of any kind.

Please send any comments regarding the documentation to:

[email protected]

Find out more about HIKVISION at www.hikvision.com

mailto:[email protected]

http://www.hikvision.com/



Contents

1. Overview ............................................................................................. 3

2. Installation ......................................................................................... 3

3. Quick Start .......................................................................................... 3

Step1: Login ............................................................................... 3

Step2: Disk Management ............................................................... 4

Step3：Main Interface ................................................................... 4

Step4：Add IP Camera (Optional) .................................................... 6

Step5：Record Schedule (Optional).................................................. 9

Step6：Preview ........................................................................... 10

Step7: Playback .......................................................................... 11

Step8: Exit System ...................................................................... 13



1. Overview

This Quick Start Guide is for first time customers and will instruct login, disk

management, add camera, record schedule, live preview, playback and logout step

by step. For more operation details about iVMS-2000, please refer to iVMS-2000

User Manual.

2. Installation

For installation, please refer to iVMS-2000 V2.0.0 Installation Manual

3. Quick Start

Step1: Login

Double click the shortcut on desktop to start. After the login dialog

popup (figure 3-1), please input default user name: admin, password: 12345 and

click [Login] button.

Figure 3-1 Login Dialog



Step2: Disk Management

iVMS-2000 adopts disk pre-allocation technology, and will require to

pre-allocate space before recording. The figure 3-2 will popup after login. Click [OK]

to enter Disk Management (Figure 3-3).

Figure 3-2 Prompt for disk management

Figure 3-3 Disk Management

The Unused Disk list will show all available partitions. Select the partitions for

recording and click [Add] button to pre-allocate space. The available partition

should have more than 2GB free space. After pre-allocation, the state of partition

will be Allocated.

Click [OK] to enter next step.

Step3: Main Interface

After initializing system (Figure 3-4), the main interface will popup

(Figure3-5)



Figure 3-4 Initializing

Figure 3-5 Main Interface

If Hikvision Capture Card is installed, the iVMS-2000 will list the analog

cameras. For capture card, please refer to Hikvision capture card manual



Step4: Add IP Camera (Optional)

Check in menu to enter [Config] interface (Figure 3-6)

Figure 3-6 Configuration Interface

Click [Camera] on the left to enter the Camera Configuration Interface (Figure

3-6, step 4). The camera management area is showed in Figure 3-7:

Figure 3-7 Camera Management

Click [Add] button to add cameras in popup dialog (Figure 3-8)

Step4

5555

55 Step5

5555

55



Figure3-8 Add Camera Diag

1. Auto Detect and Add

iVMS-2000 will list all IP cameras in same gateway. Input Camera’s user name

and password at bottom and click [OK] to add. (Hikvision IP Camera’s default

user name: admin and password: 12345)

If the listed cameras have same IP address, click [Config Camera Parameter]

button to modify conflict IP address (Figure 3-9)

Figure 3-9 Modify Network Parameters of IP Camera

After configuring the IP address (or Gateway also), click [OK] to exit. As usual,

1 2 3



Port and Subnet Mask don’t need to be modified.

If the IP Camera is in different Gateway, please select [Add Single IP] or [Add

IP Range] to add it.

2. Add Single IP

Figure 3-10 Add Single IP

Input the IP address, port, user name and password of the camera that

need be added;

Click [Get Camera Info] to check if the camera is online.

Select the camera in the list, and click [OK] to add.

3. Add IP Range

Figure 3-11 Add IP Range

Input Start IP and End IP, port, user name and password for all cameras,

please make sure all cameras have the same port, user name and

password.

Click [Get Camera Info] to check if cameras are online.

Click [OK] to add all listed cameras.



Step5: Record Schedule (Optional)

By default, cameras are scheduled for all day motion detection record. If the

default schedule doesn’t need be modified, please skip this step.

Click [Schedule] in Configuration Interface (Figure 3-6, Step5) to enter

Schedule interface. The schedule management area is showed in Figure 3-12:

Figure3-12 Schedule Management

Click [Modify] button in Figure3-12 to enter configuration dialog (Figure3-13).

Figure 3-13 Modify Record Schedule

Motion Detection Area, Encoding Parameters, Record Temperate, Pre-record

Time, Post Record Time and Record Mode can be configured.

Click [Delete] / [Delete All] to delete existing schedule;

Click [Motion] / [Schedule] to select Record Mode;

Drag the mouse on the schedule to specify a time bar (maximum: 8 bars),

the length of time bar can be adjusted and the bar can be copied to other

days.

1 2

3

4



Click [Ok] to finish the schedule configuration.

Step6: Preview

To preview live video, drag the camera in left list to the right preview window

(Figure3-14)

Figure 3-14 Main Console

Icons in camera list

Icon Description

Camera is connected and works normally.

Camera is disconnected

Camera is recording

Camera is alarming



Tool bar in each preview window:

Button Description

Control PTZ on video directly, 8 direction icons will be

showed.

Instant playback about 1 minute record of current camera.

Digital Zoom and a Viewfinder will popup.

Take Snapshot of current camera.

Start Manual record, click again to stop.

Stop preview current camera.

Main Buttons:

Button Name Description

Preview Layout Select different preview layout.

Full Screen Preview video in Full Screen mode, click

again to exit

Close All Stop previewing all Cameras

Emergency Record Start emergency record for all cameras

and will stop automatically(set the record

duration in General Settings interface)

Manual Record Start Manual Record for all cameras, click

again to stop

Auto Switch Start Auto Switch by cameras or groups

Live Audio Enable/Disable Live Audio

Volume Adjust Volume for Live Audio

Step7: Playback

Check in menu to enter [Playback] interface (Figure 3-15)



Figure 3-15 Playback Interface

Click button to search record (Figure3-16).



Figure 3-16 Search by Time Interface

Select the checkbox or drag the mouse to select cameras.

Select the date, time and record type on the top

Click [OK] button at bottom to search and playback

Step8: Exit System

Click in menu (or click button on main interface), and

a confirmation dialog will popup. Click [OK] button to exit iVMS-2000.

Figure 3-17 Exit System

Documents

iVMS-2000 - VideoWave HA Series/iVMS... · 2011. 6. 17. · iVMS-2000 Hybrid PC-DVR Software Quick Start Guide V2.0.1 Hangzhou Hikvision Digital Technology Co., Ltd