UNLOCKING TECHNOLOGY

IVECO

COPYRIGHT 2009

2 Copyright 2009 Version: 2.3 July 2011

APPLICATIONS ADS136 IVECO 3 ADS177 IVECO CAN 3

DIAGNOSTIC SOCKETS LOCATIONS IVECO 4

GENERAL OPERATION 5

SPECIAL FUNCTIONS 6

PAGE

IVECO - CONTENTS

TIPS & HINTS 15

COPYRIGHT 2009

3 Copyright 2009 Version: 2.3 July 2011

DAILY 29L 10, 11, 12, 14 05

ADC100+ADC146 A ADC100+

ADC146

DAILY 35S 10, 11, 12, 13, 14, 17

05 ADC100+ADC146 A ADC100+

ADC146

DAILY 35C 10, 11, 12, 13, 14, 17

05 ADC100+ADC146 A ADC100+

ADC146

DAILY 40C 10, 11, 12, 13 05

ADC100+ADC146 A ADC100+

ADC146

DAILY 45C 10, 13 05

ADC100+ADC146 A ADC100+

ADC146

DAILY 50C 11, 13, 14, 17 05

ADC100+ADC146 A ADC100+

ADC146

DAILY 60C 15 05

ADC100+ADC146 A ADC100+

ADC146

DAILY 65C 15, 17 05

ADC100+ADC146 A ADC100+

ADC146

1234 PRO AD100

IVECO - ADS136

APPLICATIONS

DAILY 06 Euro 4 ADC250 A N/A

ECODAILY 06

Euro 5 EEV

ADC250 A N/A

1234 PRO AD100

IVECO CAN - ADS177

COPYRIGHT 2009

4 Copyright 2009 Version: 2.3 July 2011

IVECO

DIAGNOSTIC SOCKET LOCATIONS

DAILY DAILY

COPYRIGHT 2009

5 Copyright 2009 Version: 2.3 July 2011

The immobiliser system fitted to the Iveco Daily provides theft protection using the ignition key and transponder device with a rolling code. There is an immobiliser symbol on the dashboard that indicates the status of the immobiliser. The system consists of an aerial fitted around the ignition barrel, an immobiliser ECU and a separate remote (plip) ECU. The keys and remotes have to be programmed separately as they are controlled by individual ECU’s. IMPORTANT: Both the immobiliser ECU and remote ECU normally have the same security code. However if either one of the ECU’s has been replaced then it is possible that they haven’t both been re-programmed with the same security code, in these cases two separate security codes will be required.

GENERAL OPERATION

COPYRIGHT 2009

6 Copyright 2009 Version: 2.3 July 2011

SPECIAL FUNCTIONS

IVECO - >2005 PROGRAM KEYS

VEHICLE SELECTION

+ FIAT

+ GENERLA MOTORS

+ HONDA

+ HYUNDAI

+ IVECO

+ JEEP

VEHICLE SELECTION

+ CHASSI CAB

+ VAN

VEHICLE SELECTION

IMMOBILISER

REMOTE FUNCTIONS

SWITCH IGNITION ON

PRESS ENTER KEY

ECU IDENTIFICATION

IVECO IMMOBILISER

HARDWARE V X.X

SOFTWARE X.X

PRODUCTION X.X

PRESS ENTER KEY

DIAGNOSTIC MENU

PROGRAM KEYS

KEYS PROGRAMMED

PRESS ENTER KEY

NOTE : USE GENUINE KEYS ONLY

NOTE 2 : ANY KEYS NOT AVAILABLE WILL BE DELETED,

AND WILL NEED TO BE PROGRAMMED LATER.

NOTE 3 : KEYS MUST BE VRIGIN, AND ARE 1 TIME PROGRAM ONLY

WEB SECURITY

DIAGNOSTIC MENU

ECU IDENTIFICATION

FAULT CODES

SPECIAL FUNCTIONS

PRESS ENTER KEY

DIAGNOSTIC MENU

WARNING

KEYS NOT AVAILABLE

WILL BE DELETED

CONTINUE

YES = ENTER NO = BACK

PRESS ENTER KEY

PROGRAMMING KEYS

SWITCH IGNITION OFF

PRESS ENTER KEY

PROGRAMMING KEYS

SWITCH IGNITION ON

PRESS ENTER KEY

PROGRAMMING KEYS

X KEYS STORED

MAX 3/ MIN 2 KEYS

PROGRAM AVAILABLE

OLD KEY FIRST

CONTINUE

YES=ENTER NO=BACK

NOTE : IF THE KEY USED IS ALREADY PROGRAMMED THE EDC

INJECTOR SYMBOL AND IMMO WARNING LIGHT WILL GO OUT 3

SECONDS AFTER IGNITION IS SWITCHED ON.

IF KEY IS UNPROGRAMMED THEN IMMO LIGHT WILL FLASH SLOWLY

AND EDC LIGHT QUICKLY

PROGRAMMING KEYS

PLEASE ENTER NO.

OF OLD KEYS TO

PROGRAM

PROGRAMMING KEYS

PLEASE ENTER NO.

OF NEW KEYS TO

PROGRAM

NUMBER OF OLD KEYS

_ _ _ _

1 2 3 4 5

6 7 8 9 0

NUMBER OF NEW KEYS

_ _ _ _

1 2 3 4 5

6 7 8 9 0

ENTER NUMBER OF OLD KEYS REQUIRED. THIS ALLOWS DELETED KEYS TO BE RE-

PROGRAMMED. IF YOU DON’T WANT TO

RE-PROGRAM OLD KEYS (IE STOLEN) THEN ENTER’0’

COPYRIGHT 2009

7 Copyright 2009 Version: 2.3 July 2011

SECURITY CODE

_ _ _ _

1 2 3 4 5

6 7 8 9 0

PROGRAMMING KEYS

X OLD KEYS

X NEW KEYS

IS THIS CORRECT ?

YES=ENTER NO=BACK

SECURITY CODE

22BC

IS CODE CORRECT?

SPECIAL FUNCTIONS

IVECO - >2005

PROGRAMMING KEYS

TOO MANY KEYS

SELECTED

SWITCH IGNITION ON

PRESS ENTER KEY

PROGRAMMING KEYS

PLEASE WAIT UP

TO A MINUTE

PROGRAMMING KEYS

X KEYS STORED

PRESS ENTER KEY

PROGRAMMING KEYS

SWITCH IGNITION OFF

PRESS ENTER KEY

PROGRAMMING KEYS

IGNITION OFF

PRESS ENTER KEY

PROGRAMMING KEYS

ENTER KEY #2

PRESS ENTER KEY

PROGRAMMING KEYS

FINISHED

PRESS ENTER KEY

FINISHED

NOTE : EDC AND IMMO LIGHTS SHOULD STOP FLASHING AT THIS

POINT.

IF TOTAL NUMBER OF OLD KEYS ENTERED IS >3, THEN YOU WILL

BE ADVISED THAT TOO MANY KEYS HAVE BEEN SELECTED.

YOU WILL BE ASKED TO RE-ENTER THE NUMBER OF OLD & NEW KEYS

AGAIN

ENTER THE SECOND KEY IN THE IGNITION TO BE PROGRAMMED.

THIS IS REPEATED FOR THE NUMBER OF KEYS TO BE

PROGRAMMED

PROGRAMMING KEYS

SWITCH IGNITION ON

PRESS ENTER KEY

ENTER 5 DIGIT NUMERIC SECURITY CODE (SAME CODE FOR

REMOTES) NOTE: IF THE IMMOBILISER ECU (DIFFERENT TO REMOTE ECU) HAS BEEN CHANGED, ENSURE

THE CODES ARE STILL THE SAME, FROM THE DEALER. IF NOT THEN

TWO SEPARATE CODES ARE REQUIRED.

AT THIS STAGE THE EDC SYMBOL WILL FLASH (IF NEW KEYS ARE

PROGRAMMED).

IMMOBILISER SYMBOL EXTINGUISHES

COPYRIGHT 2009

8 Copyright 2009 Version: 2.3 July 2011

SPECIAL FUNCTIONS

IVECO - >2005

DIAGNOSTIC MENU

PROGRAM KEYS

KEYS PROGRAMMED

PRESS ENTER KEY

KEYS PROGRAMMED

DISPLAYS THE NUMBER OF KEYS STORED.

KEYS STORED

REMOTES STORED: X

PRESS ENTER KEY

COPYRIGHT 2009

9 Copyright 2009 Version: 2.3 July 2011

SPECIAL FUNCTIONS

IVECO - >2005 PROGRAM REMOTES

VEHICLE SELECTION

+ FIAT

+ GENERLA MOTORS

+ HONDA

+ HYUNDAI

+ IVECO

+ JEEP

VEHICLE SELECTION

+ CHASSI CAB

+ VAN

VEHICLE SELECTION

IMMOBILISER

REMOTE FUNCTIONS

SWITCH IGNITION ON

PRESS ENTER KEY

DIAGNOSTIC MENU

PROGRAM REMOTES

REMOTES PROGRAMMED

PRESS ENTER KEY

NOTE :

ANY REMOTES NOT AVAILABLE WILL BE DELETED,

AND WILL NEED TO BE PROGRAMMED LATER.

DIAGNOSTIC MENU

ECU IDENTIFICATION

FAULT CODES

SPECIAL FUNCTIONS

PRESS ENTER KEY

PROGRAMMING REMOTES

WARNING

REMOTES NOT AVAILABLE

WILL BE DELETED

CONTINUE

YES = ENTER NO = BACK

PRESS ENTER KEY

PROGRAMMING REMOTES

PLEASE ENTER NO. OF

REMOTES TO PROGRAM

MAX 3 REMOTES

PRESS ENTER KEY

PROGRAMMING REMOTES

ACCESS GAINED

PRESS ENTER KEY

PROGRAMMING REMOTES

WITHIN 30 SEC

PRESS REMOTE 1

ECU IDENTIFICATION

IVECO REMOTES

HARDWARE RELEASE WK : XX

HARDWARE RELEASE VR : XX

SOFTWARE RELEASE WK : XX

SOFTWARE RELEASE VR : XX

PRESS ENTER KEY

NUMBER OF REMOTES

_ _ _ _

1 2 3 4 5

6 7 8 9 0

PROGRAMMING REMOTES

X REMOTE/S

IS THIS CORRECT ?

YES=ENTER NO=BACK

SECURITY CODE

_ _ _ _

1 2 3 4 5

6 7 8 9 0

SECURITY CODE

22BC

IS CODE CORRECT?

ENTER 5 DIGIT NUMERIC SECURITY CODE (SAME CODE FOR

REMOTES) NOTE: IF THE IMMOBILISER ECU (DIFFERENT TO REMOTE ECU) HAS BEEN CHANGED, ENSURE

THE CODES ARE STILL THE SAME, FROM THE DEALER. IF NOT THEN

TWO SEPARATE CODES ARE REQUIRED.

AFTER PRESSING ENTER, IF MORE REMOTES WERE

REQUESTED THEN THE SCREEN WILL PROMPT YOU TH PRESS

REMOTE 2 & 3.

COPYRIGHT 2009

10 Copyright 2009 Version: 2.3 July 2011

SPECIAL FUNCTIONS

IVECO - >2005

FOLLOW THE INSTRUCTIONS ON THE SCREEN.

TURN IGNITION OFF / ON / OFF (ALLOW 3 SECONDS AT EACH

STAGE)

REMOVE THE KEY.

TEST EACH REMOTE

PROGRAMMING REMOTES

IGNITION OFF /ON / OFF

REMOVE KEY

TEST REMOTE OPERATION

PRESS ENTER KEY

PROGRAMMING REMOTES

X REMOTES STORED

PRESS ENTER KEY

FINISHED

DIAGNOSTIC MENU

PROGRAM REMOTES

REMOTES PROGRAMMED

PRESS ENTER KEY

REMOTES PROG

DISPLAYS THE NUMBER OF REMOTES STORED.

REMOTES STORED

REMOTES STORED: X

PRESS ENTER KEY

COPYRIGHT 2009

11 Copyright 2009 Version: 2.3 July 2011

SPECIAL FUNCTIONS

IVECO DAILY - 2006 > PROGRAM KEYS

VEHICLE SELECTION

+ FIAT

+ GENERLA MOTORS

+ HONDA

+ HYUNDAI

+ IVECO

+ JEEP

VEHICLE SELECTION

+ DAILY

+ EUROCARGO

+ EUROTRAKKER

+ STRALIS

+ EUROFIRE

SWITCH IGNITION ON

PRESS ENTER KEY

ECU IDENTIFICATION

VIN: XXXXXXXXXXXXXXXXX

PRESS ENTER KEY

DIAGNOSTIC MENU

PROGRAM KEYS

PROGRAM REMOTES

PRESS ENTER KEY

NOTE : USE GENUINE KEYS ONLY

NOTE 2 : ANY KEYS NOT AVAILABLE WILL BE

PERMANENTLY DELETED, NOTE 3 : KEYS MUST BE VRIGIN, AND ARE 1 TIME PROGRAM ONLY

DIAGNOSTIC MENU

ECU IDENTIFICATION

FAULT CODES

SPECIAL FUNCTIONS

PRESS ENTER KEY

DIAGNOSTIC MENU

WARNING

ALL KEYS WILL

BE CLEARED

CONTINUE

YES = ENTER NO = BACK

PRESS ENTER KEY

PROGRAMMING KEYS

INSERT KEY TO PROGRAM

SWITCH IGNITION ON

PRESS ENTER KEY

NUMBER OF KEYS

_

1 2 3 4 5

6 7 8 9 0

VEHICLE SELECTION

-> 2005

2006 ->

IMPORTANT ORIGINAL KEYS NEED TO BE

PROGRAMMED IN DURING THIS PROCEDURE.

IF THEY ARE NOT PROGRAMMED IN AT THIS STAGE THEY WILL BE

PERMANENTLY DELETED

DIAGNOSTIC MENU

WARNING

PREVIOUSLY PROGRAMMED

KEYS NOT PROGRAMMED

DURING THIS PROCEDURE

WILL BE PERMANETLY DELETED

PRESS ENTER KEY

CONTINUE = ENTER EXIT = BACK

SECURITY CODE

_ _ _ _ _

1 2 3 4 5

6 7 8 9 0

SECURITY CODE

22BC

IS CODE CORRECT?

NUMBER OF KEYS

2

PROGRAMMING KEYS

INSERT NEXT KEY

SWITCH IGNITION ON

PRESS ENTER KEY

DIAGNOSTIC MENU

IMMOBILISER

REMOTES

PRESS ENTER KEY

COPYRIGHT 2009

12 Copyright 2009 Version: 2.3 July 2011

PROGRAMMING KEYS

SWITCH IGNITION OFF

PRESS ENTER KEY

SPECIAL FUNCTIONS

IVECO DAILY - 2006 > PROGRAM KEYS

PROGRAMMING KEYS

PLEASE WAIT

25 SEC

*******

SWITCH IGNITION ON

PRESS ENTER KEY

PROGRAMMING KEYS

PROCEDURE COMPLETE

PRESS ENTER KEY

PROGRAM REMOTES

SWITCH IGNITION ON

PRESS ENTER KEY

DIAGNOSTIC MENU

PROGRAM REMOTES

REMOTES PROGRAMMED

PRESS ENTER KEY

WARNING PREVIOUSLY PROGRAMMED

REMOTES NOT PROGRAMMED DURING THIS PROCEDURE

WILL BE PERMANTELY DISABLED CONTINUE?

SECURITY CODE

_ _ _ _

1 2 3 4 5

6 7 8 9 0

SECURITY CODE

22BC

IS CODE CORRECT?

ENTER 5 DIGIT NUMERIC SECURITY CODE (SAME CODE FOR

KEYS) NOTE: IF THE IMMOBILISER ECU (DIFFERENT TO REMOTE ECU) HAS BEEN CHANGED, ENSURE

THE CODES ARE STILL THE SAME, FROM THE DEALER. IF NOT THEN

TWO SEPARATE CODES ARE REQUIRED.

WHEN REQUESTED TO DO SO PRESS AND HOLD THE UNLOCK

BUTTON ON EACH REMOTE. ACTION MUST BE COMPLETE

WITHIN 5 SEC.

CONTINUE?

PROGRAM REMOTES

PRESS AND HOLD UNLOCK

BUTTON ON THE FIRST REMOTE

REMOTES PROGRAMMED: 1 DO YOU WANT TO PROGRAM

MORE REMOTES?

PROGRAM REMOTES

PRESS AND HOLD UNLOCK

BUTTON ON THE NEXT REMOTE

REMOTES PROGRAMMED: 2 DO YOU WANT TO PROGRAM

MORE REMOTES?

PROGRAM REMOTES

PROCEDURE COMPLETE

REMOTES PROGRAMMED: 2

PRESS ENTER KEY

COPYRIGHT 2009

13 Copyright 2009 Version: 2.3 July 2011

TIPS & HINTS

1. Both the immobiliser ECU and remote ECU normally have the same security code. However if either one of the ECU’s has been replaced then it is possible that they haven’t both been re-programmed with the same security code, in these cases two separate security codes will be required. 2. Use genuine keys only. 3. Once programmed they can only be re-programmed to the same vehicle. 4. All programmed keys or remotes will be deleted when programming. If required, they must be re-programmed in

during the programming sequence

COPYRIGHT 2009

14 Copyright 2009 Version: 2.3 July 2011

Advanced Diagnostics Ltd Diagnostics House Eastboro Fields Hemdale Nuneaton CV11 6GL T: +44(0)2476 347000 F: +44(0)2476 347100 W: www.advanced-diagnostics.co.uk