For assistance with assembly, please contact Hayneedle Customer Care Center

1-888-880-4884

ITEM NAME: [Coral Coast Dursey All-Weather Wicker 4 Piece Patio Conversation Set with Cushion]

SKU:

1/11

[ZEST011-1]

PRE-ASSEMBLY PREPARATION:

! THIS PACKAGE MAY CONTAIN SMALL ITEMS WHICH SHOULD BE KEPT AWAY FROM CHILDREN

• Please check that all parts and hardware are included before beginning assembly.

• Save all packing materials until assembly is complete to avoid accidentally discarding smaller

parts or hardware.

• Read through the preparation and assembly instructions in full before beginning assembly.

• Please use CAUTION AND CARE WHEN LIFTING the product to avoid personal injury and

(or) damage to the product.

• The following additional tools are required for assembly: [INSERT LIST OF ADDITIONAL

TOOLS, NOT PROVIDED IN HARDWARE PACKAGE]

• For ease of assembly, two adults are recommended.

NOTES:Please read all instruction sheet carefully before you star assembly.WARNING:1. Proper use of this chair is for single person seating only. MAXIMUM CAPACITY IS 250LBS(113KGS).2. Single chair is not intended for standing purpose and will not function as a step stool or step ladder.3. Use on even surfaces only.4. ENSURE THAT ALL SCREWS ARE SECURELY TIGHTENED BEFORE USE. IT IS RECOMMENDED THAT YOU RE-CHECK ALL SCREWS OCCASIONALLY AND RE-TIGHTEN IF NECESSARY.5. Improper use of this product or failure to use as directed may in injury.6. Please remove white tape on foot of product after assembly is completed. Tape is to protect the piece in handling.

2/11

(Resin Wicker Single Chair)Assembly Instructions

Coral Coast Dursey All-Weather Wicker 4 Piece Patio Conversation Set with Cushion

TOOLS REQUIRED:

Screw & Washer

HARDWARE LIST: Scaled to Actual Size

PANEL AND FITTINGS IDENTIFICATION:

Left arm Qty:2 Right arm Qty:2

29.5”

26” 26”

Qty: 20 Mounting Bracket Qty: 20

A1

E F

A2

3/11

0.63”0.79”

0.79”

29.5”

Seat panel Qty:2 Back panel Qty:2

23.5”12.2”

22.5”A3 A4

28.75 ”

22.5”

Seat cushion Qty:2

23.5”

3”

22.5”M

Back cushion Qty:2

16.5”

22.5”N

3”

0.24”

Qty: 1

I

Hexagonal wrench

2.76”

1.1”

A1A2

A4

M

N

STEP-BY-STEP ASSEMBLY:

1

2

3

STEP 1:

STEP 2:

STEP 3: 4

STEP 4 :

4/11

EE

E

E E

E E

Use the plug on the top of the right corner of the back panel (A4) to connect the right arm (A2) together,then Install the right arm (A2) to back panel (A4) with 1pcs screw & washer and 1pc mounting bracket (F) as below diagram. Do not full tighten now and repeat the same prodedure to the other arm (A1).

Install the seat panel (A3) to the right arm (A2) with 3 pcs screws & washers and 3 pcs mounting brackets (F) as below diagram, Do not full tighten now and repeat the same prodedure to the other arm (A1).

EE

E

Connect the seat panel(A3) to the back panel (A4) with 2 pcs screws & washers and 2 pcs mounting brackets (F).Verify the alignment and adjust it if necessary,full tighten all the screws by using hexagonal wrench (I) now.

Put 1pc seat cushion (M) and 1pc back cushion (N) on the chair.The chair is finish assebbly now.

A1A2

A4

A3

F

FE

F

E

F

E

5/11

(Resin Wicker Loveseat)Assembly Instructions

Coral Coast Dursey All-Weather Wicker 4 Piece Patio Conversation Set with Cushion

NOTES:Please read all instruction sheet carefully before you star assembly.

WARNING:1. Proper use of this loveseat is for two persons seating only. MAXIMUM CAPACITY IS 350LBS(159KGS).2. Loveseat is not intended for standing purpose and will not function as a step stool or step ladder.3. Use on even surfaces only.4. ENSURE THAT ALL SCREWS ARE SECURELY TIGHTENED BEFORE USE. IT IS RECOMMENDED THAT YOU RE-CHECK ALL SCREWS OCCASIONALLY AND RE-TIGHTEN IF NECESSARY.5. Improper use of this product or failure to use as directed may in injury.6. Please remove white tape on foot of product after assembly is completed. Tape is to protect the piece in handling.

6/11

HARDWARE LIST: Scaled to Actual Size

PANEL AND FITTINGS IDENTIFICATION:

Left arm Qty:1 Right arm Qty:1

A1 A2

Seat panel Qty:1 Back panel Qty:1

12.2”

45.5”B1 B2

28.75 ”

45.5”

23.5”

Seat cushion Qty:2

23.5”

3”

22.5”M

Back cushion Qty:2

16.5”

22.5”N

3”

Mounting Bracket Qty: 10

F 0.79”

0.79”

Screw & Washer Qty: 10

E0.63”

0.24”

29.5”

26” 26”

29.5”

7/11

STEP-BY-STEP ASSEMBLY:

1

2

3

STEP 1:

STEP 2:

STEP 3: 4

STEP 4 :

EE

E

E E

Use the plug on the top of the right corner of the back panel (B2) to connect the right arm (A2) together,then Install the right arm (A2) to back panel (B2) with 1pcs screw & washer and 1pc mounting bracket (F) as below diagram. Do not full tighten now and repeat the same prodedure to the other arm (A1).

Install the seat panel (B1) to the right arm (A2) with 3 pcs screws & washers and 3 pcs mounting brackets (F) as below diagram, Do not full tighten now and repeat the same prodedure to the other arm (A1).

Connect the seat panel(B1) to the back panel (B2) with 2 pcs screws & washers and 2 pcs mounting brackets (F).Verify the alignment and adjust it if necessary,full tighten all the screws by using hexagonal wrench (I) now .

Put 2pcs seat cushions (M) and 2 pcs back cushions (N) on the loveseat.The loveseat is finish assebbly now.

M

N

A1

E E

A1

A2

A2

F

EE

EE

E

B2

B2

B1

8/11

Screw & Washer

HARDWARE LIST & Scaled to Actual Size

PANEL AND FITTINGS IDENTIFICATION:

Side panel Qty:2 Table shelf Qty:1

22”

20.5”

22”

40.5”

Qty: 8

C1

E

C2

0.63”

0.24”

Glass table top Qty:1

22”

8”

32”

C3

(Resin Wicker Coffee Table w / Glass Top)Coral Coast Dursey All-Weather Wicker 4 Piece Patio Conversation Set with Cushion

TOOLS REQUIRED:

Mounting Bracket Qty: 8

F 0.79”

0.79”

Assembly Instructions

NOTES:Please read all instruction sheet carefully before you star assembly.

WARNING:1. Table is not intended for sitting on or will not function as a step tool or ladder. 2. Use on even surfaces only.

ENSURE THAT ALL SCREWS ARE SECURELY TIGHTENED BEFORE USE. IT IS RECOMMENDED THAT YOU RE-CHECK ALL SCREWS OCCASIONALLY AND RE-TIGHTEN IF 3. Improper use of this product or failure to use as directed may in injury.4. Please remove white tape on foot of product after assembly is completed. Tape is to protect the piece in handling.

10/11

C1 C1C2

C3

STEP-BY-STEP ASSEMBLY:

1

2

STEP 1:

STEP 2:

E

E EE E

EE

E

Install 1pc table leg (C1) to the table shelf (C2) with 4 pcs screws & washers and 4 pcs mounting brackets (F).Do not full tighten now and repeat the same prodedure to install the other leg.

Verify the alignment and adjust it if necessary,full tighten all the screws by using hexagonal wrench (I) and put the glass table top (C3) on the frame.

F

E

MAINTENANCE AND CARE TIPS FOR OUTDOOR FURNITURE

Care & Maintenance:

SPILLS:

Immediately wipe up the spill using a white damp cloth. Repeat process if necessary until stain is gone. Allow cushion to air dry.

FABRIC CARE:Hand wash cold, non-chlorine bleach when needed, lay flat to dry. Cool iron if necessary. Do not dry clean.

RESIN WICKER PRODUCT CARE:

Before using, clean the product completely with a soft dry towel. When not in use, wipe free of any dirt or loose objects, wash with a mild solution of soap and water; Rinse thoroughly and dry completely. Do not use strong detergent or abrasive cleaners. Over time nuts and bolts can loosen. Occasionally, check nuts and bolts on all the chair and table, re-tighten if necessary.

10/11

11/11