ITEM #0577456

7.5 FT. PRE-LIT DOUGLAS FIRTREE

MODEL #DF-75C85

1

Questions, problems, missing parts? Before returning to your retailer, call our customerservice department at 1-800-311-3324, 9:30 a.m. - 4:00 p.m., EST, Monday - Friday.

ATTACH YOUR RECEIPT HERE

Serial Number Purchase Date

Español p. 8

AB14206 Lowes.com

2

1

10

PACKAGE CONTENTS

DESCRIPTIONPART QUANTITY

1

Tree Top

1

2 Tree Middle

Tree Bottom

1

3

4

5

6 Extension cord 1

Tree Stand

Light string (preassembled)

1

Lowes.com

3

5

2

1

4

6

5

InsertGreen Label

Plug Into WallOutlet

Insert Red LabelPlugs Into RedLabeled Extension Cord

3

CAUTION

When using electrical products, basic precautions should always be followed including the following:

• To reduce the risk of fire, do not deliberately reposition either bulb or lampholder contact.

• To reduce the risk of overheating, replace burned out lamps promptly. This is an electrical product - not a toy! To avoid the risk of fire, burns, personal injury, and electric shock it should not be played with or placed where small children can reach it.

• Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use. When products are used in outdoor applications, connect the product to a Ground Fault Circuit Interrupting (GFCI) outlet. If one is not provided, contact a qualified electrician for proper installation.

• This seasonal use product is not intended for permanent installation or use.

• Do not mount or place near gas or electric heaters, fireplaces, candles or other similar sources of heat.

• Do not secure the wiring of the product with staples or nails, or place on sharp hooks or nails.

• Do not let lamps rest on the supply cord or on any wire.

• Unplug the product when leaving the house, when retiring for the night, or if left unattended.

• Do not use this product for other than its intended use.

• Do not hang ornaments or other objects from cord, wire, or light string.

• Do not close doors or windows on the product or extension cord as this may damage the wire insulation.

• Do not cover the product with a cloth, paper or any material not part of the product when in use.

• The product employs overload protection (fuse). A blown fuse indicates an overload or short circuit situation. If the fuse blows, unplug the product from the outlet. Also unplug any additional strings or products that may be attached to the product. Replace the fuse as per the Safety Information section (follow product marking for proper fuse rating) and check the product. If the replacement fuse blows, a short circuit may be present and the product should be discarded.

• This product has a polarized plug (one blade is wider than the other) as a feature to reduce the risk of electric shock. This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not use with an extension cord unless plug can be fully inserted. Do not alter or replace the plug.

• Read and follow all instructions that are on the product or provided with the product.

Wash hands after use.

SAFETY INFORMATION

Please read and understand this entire manual before attempting to assemble, operate or install the product.

• Grasp plug and remove from the receptacle or other outlet device. Do not unplug by pulling on cord.

• Lift up to unsnap locking tab; then pull lamp and plastic base straight out of lamp holder.

• Replace lamp with only 2.5 Volt push-in type lamp provided with product.

BULB REPLACEMENT INSTRUCTIONS:Grip plasticnot glass

Do not twist lampPull straight outPush straight in!

Lowes.com

4

ASSEMBLY INSTRUCTIONS

SAVE THESE INSTRUCTIONS.

PREPARATIONBefore beginning assembly of product, make sure all parts are present. Compare parts with package contents list. If any part is missing or damaged, do not attempt to assemble the product.

SAFETY INFORMATION

1. Remove the protective cap from the tree bottom (1). Insert the tree bottom (1) into the tree stand (4). Screw the preassembled eye bolt on the tree stand (4) through the hole of the metal tab so it touches the trunk of the tree bottom (1). Adjust the tree bottom (1) by screwing the eye bolt in or out.

1

Protective cap

1

4

Estimated Assembly Time: 5 minutes.No Tools Required for Assembly.

FUSE REPLACEMENT INSTRUCTIONS:

• Grasp plug and remove from the receptacle or other outlet device. Do not unplug by pulling on cord.

• Open fuse cover by sliding open the fuse access cover on top of attachment plug toward blades.

• Turn fuse holder over and remove fuse carefully.

• Risk of fire. Replace fuse only with 3 amp, 125 Volt fuse for decorative lighting string (provided with product).

• Close fuse cover by sliding closed the fuse access cover on top of attachment plug.

New fuse

Burned fuse

Lowes.com

Click

● Pull apart the legs of the stand so that they are snapped into an x-shape. Place the tree stand on a level surface.● To close the stand, press the metal button and fold the legs together.

Tree Stand Assembly

ASSEMBLY INSTRUCTIONS

2. Remove bubble wrap and cord from the tree bottom (1). Shape the branches of the tree bottom (1). Note: Side branches should be pulled out to form the shape of a "Y."

3. Remove the protective cap from the tree middle (2). Insert the tree middle (2) into the tree bottom (1). Remove the bubble wrap and cord from the tree middle (2) to allow the branches to unfold into place.

4. Connect the light set plug from the tree bottom (1) into the extension cord outlet on the tree middle (2). Note: You MUST match the color code on the plug to the color code on the extension cord outlets.

5. Plug the extension cord assembly into the power supply. Both sections of the tree should be lit now. If some bulbs do not light, search for any loose plugs or broken/missing bulbs. Shape the branches of the tree middle (2). Note: Keep the tree plugged in while shaping the branches; should a light flicker while doing this, check the bulb(s) that may have caused the trouble.

Sidebranches

2

Side view

32

1

5

4

5 Lowes.com

2

1

5

1

2

5

ASSEMBLY INSTRUCTIONS

• Before using or reusing, inspect product carefully. Discard any products that have cut, damaged or frayed wire insulation or cords, cracks in the lamp holders or enclosures, loose connections, or exposed copper wire.

• When storing the product, carefully remove the product from wherever it is placed, including trees, branches, or bushes, to avoid any undue strain or stress on the product conductors, connections and wires.

• When not in use, store neatly in a cool, dry location protected from sunlight.

CARE AND MAINTENANCE

6. Insert the tree top (3) into the tree middle (2). Remove the bubble wrap and cord from the tree top (3) to allow the branches to unfold into place.

7. Connect the plug on the light set of the tree top with red label

8. Plug the extension cord of the tree middle (2) assembly into the power supply. The tree should be lit now. If some bulbs do not light, search for any loose plugs or broken/missing bulbs. Note: Keep the tree plugged in while shaping the branches; should a light flicker while doing this, check the bulb(s) that may have caused the trouble.

A1 (3) into the extension cord outlet connected to the tree middle (2). Note: You MUST match the color code on the plug to the color code on the extension cord outlets. Shape the branches on the tree top (3), then step back and evaluate the overall look of the tree. Shift branches as necessary.

73

2

63

2

5

8

1

2

3

6Lowes.com

TROUBLESHOOTING

REPLACEMENT PARTS LIST

PRINTED IN CHINA

For replacement parts, call our customer service department at 1-800-311-3324, 9:30 a.m. - 4:00 p.m., EST, Monday - Friday.

PROBLEM

A section doesn’t light.Bulb and socket contact loose; broken bulb or missing bulb.

Damaged or other accident.

Starting with the first unlit bulb, gently push (don’t twist) each bulb firmly into the socket, and at the same time, look and feel for a broken bulb in the socket or any empty socket where a bulb has fallen out.

Mark it with a piece of tape and unplug the tree before removing the bulb socket and any fragments. Replace the broken bulb. Should a light flicker while doing this, you have probably found the faulty bulb. Replace with a new bulb.

The remaining bulbs will stay lit; however, it is best to replace any burned out bulbs as soon as you find them.

A bulb is broken.

A bulb burns out. Inappropriate use or other accident.

POSSIBLE CAUSE CORRECTIVE ACTION

7 Lowes.com

Fuse Bulb Hinge Pin Hinge PinLock

B DC EA

PART DESCRIPTION QUANTITYAB

DE

24

FuseBulb

Hinge PinHinge Pin Lock

C Fused Bulb

Fused Bulb

102020