®IT62H

Cat® C7 Diesel Engine with ACERT™ TechnologyGross Power (SAE J1995) 172 kW/234 hpNet Power (ISO 9249) at 1800 rpm 158 kW/215 hp

Bucket Capacity 3.25 to 8.4 m3

Operating Weight 21 660 to 22 270 kg

Integrated Toolcarrier

IT62H Integrated ToolcarrierH-Series Integrated Toolcarriers – Setting a New Standard

Performance

� New Caterpillar Hydraulics

� Simultaneous Lift and Tilt functionswith M3PC valve.

� Electrohydraulic Implement Controls

� Load Sensing Pump

� Larger counterweight for higherstability and payload capacity

� No lift arm drift with Anti-drift valve

� Easiness of operation with optimumlinkage design (reach and dumpclearance)

� Low idle management system forhigh fuel efficiency

pg. 6

Performance you can feel with the capability to work in the most demanding applications. Unmatched operator comfort and efficiency in a world class cab. Revolutionary electronics and hydraulics for low-effort operation. Increased productivity with lower owning and operating costs.

Versatility

� 8-bar linkage delivers parallel lifting

� Quick coupler offering (Cat andVolvo worktools compatible)

� Wide range of work tools (Buckets, Forks and more)

� Special Machine Arrangement– Waste Handler Package

� 3rd implement function

pg. 7

Reliability and Durability

� C7 ACERT Engine TechnologyMaintains Performance, EfficiencyAnd Durability While MeetingEmissions Regulations

� Strong, Solid Structures Built To Last

pg. 4

2

Serviceability

� Service Centers For Convenient Maintenance

� Exceptional Access To Service Points

pg. 10

Owning and Operating Cost

� Proven Fuel Efficiency

� Superior Maintenance

� Electronic Systems Monitor Product Health AndPerformance

pg. 12

Complete Customer Service

Your Cat dealer offers a wide range of services that can be set up under a customer support agreement when you purchaseyour equipment. The dealer will help you choose a plan thatcan cover everything from machine and attachment selectionto replacement.

pg. 13

Operator Comfort

� Easy Cab access with inclined ladder

� Excellent Visibility through out the working range with the combination of optimized hydraulic hoses routing andthe cab raised by 50 mm

� Best rear visibility with slope hood and optional rear view camera

� Optional Control Joystick for Tilt and Lift movement

� Low cab sound level

� Optional Heated Deluxe Seat for additional comfort

� Soft detents levers

pg. 8

3

4

Reliability and DurabilityThe Cat IT62H – Built Strong and Tough – Tested And Proven – Ready To Work

Proven Reliability. The IT62H featuresmany of the components designed andproven in previous IT62 models – allcontribute to the reliability of the IT62H:� Frames� Axles� Planetary powershift transmission� IBS – Integrated Breaking System

Engine. EU Stage IIIA compliant C7 engine with ACERT Technologycombines proven systems with innovativenew technologies to precisely deliverfuel to the combustion chamber. It maintains engine performance,efficiency and durability whiledramatically reducing emissions.

The Cat C7 is a 7.2 L displacement, 6-cylinder, electronically governedengine. Electronic fuel injection isprovided through the well-provenCaterpillar hydraulically actuated,electronically controlled unit injection(HEUI) system. A wastegate turbo-charger, equipped with a titanium wheelfor improved durability, combined withair-to-air aftercooling (ATAAC) providesconsistent high horsepower withincreased altitude capability.

Electronic Controller. The engine is governed by the ADEM A4 electroniccontrol module. The controllercontinually adjusts engine output basedon load demand using a series of sensorslocated on the machine and engine.

Hydraulically Actuated Electronic Unit Injectors (HEUI). The HEUI systemhas been at work in Cat engines acrossthe product line with a proven trackrecord of consistent, durable, reliableperformance.

Powershift Transmission. The IT62Hcontinues to use heavy-duty provenpowershift transmission technology.The planetary powershift transmissionfeatures heavy-duty components tohandle the toughest applications and forfast direction changes. Built-inelectronic controls enhance productivityand durability.

Control Throttle Shifting.Controlled Throttle Shifting regulates engine speed during high-energydirectional changes for smoother shifting and longer component life.

Electronic Clutch Pressure Control.Electronic Clutch Pressure Control(ECPC) system modulates clutchesindividually to improve shift quality,component life and operator comfort.Adjustment is simplified with allsolenoid valves externally mounted ontop of the transmission housing.

� Strong, Solid Structures are built to Last

� ACERT Technology maintains engine performance, efficiency and durability while reducingemissions

5

Spread Hitch. The distance between the upper and lower hitch plates isimportant for machine performance and component life. The Cat spreadhitch design provides excellent loaddistribution and bearing life. Both theupper and lower hitch pins pivot on double tapered roller bearings –improving durability by distributingboth vertical and horizontal loads over alarger surface area. The wide openingalso provides excellent service access.

Structures. The articulated frame design of the IT62H features a durablebox-section engine frame and rigidfour-plate loader tower that isrobotically welded. Robotic weldingcreates frame joints with deep platepenetration welds and excellent fusionfor maximum strength and durability.

8-Bar Robust Linkage. This linkageprovides parallel lift to keep the load levelthroughout the lift cycle – particularlyimportant when using forks. Parallel liftallows the operator to concentrate onplacing the load, instead of retaining it.Visibility to the work tool is excellent.Larger tilt cylinders and a more robustlinkage design improve breakout force andoverall rackback capability. Rotary sensorsfor the lift circuit let the operator electro-nically set detent positions from the cab.

Integrated Braking System (IBS).The Cat exclusive Integrated BrakingSystem reduces axle oil temperatures andimproves transmission neutralizersmoothness. IBS has a direct impact on durability of the axles and brakesespecially in applications involving longdistances and/or heavy braking.

Front Frame. The front frame provides a solid mounting base for the front axle,lift arms, lift cylinders and tilt cylinder.The fabricated, four-plate loader towerabsorbs the forces associated withloading, twisting and penetration.

Rear Frame. A full box-section enginerear frame with hitch plates at the frontend provides a strong, rigid structure that resists twisting and impact loads.The result is an extremely solidmounting platform for the engine,transmission, axle, ROPS and otheraccessories.

Axles. The IT62H axles are designed byCaterpillar for durability in all operatingconditions. The front axle is rigidlymounted to the frame to support theweight of the wheel loader and withstandinternal torque loads as well as externalforces encountered throughout operation.The rear axle is designed to allow ±13°oscillation. All four wheels remain onthe ground over uneven terrain providingexcellent stability and traction.

6

� Load sensing hydraulics increase lifting capacities

� Electro hydraulic controls reducecycle times

� Consistent horsepower regardless of conditions

Load Sensing Hydraulics. The IT62Hfeatures a load sensing hydraulic systemthat automatically adjusts to operatingconditions to provide only the hydraulicflow required by the implement forimproved fuel efficiency.With the new Priority ProportionalPressure Compensation Valve,implement control is improved over the previous system – raise/lower and rack back/dump can be operatedsimultaneously and fine modulation isrepeatable for improved productivity.Operators will notice enhanced ease ofoperation, more rimpull into the pileand a 20% increase in lift force.A two-pump hydraulic system providesone pump dedicated to the hydraulicsystem, the other to the steering system.This ensures full flow to both steeringand implements – guaranteeing powerwhen and where it is needed.

Electrohydraulic Implement Controls.Finger Tip Electro hydraulic implementcontrols on the IT62H provide theoperator with responsive, smooth andprecise control of bucket and lift arms.The implement control console alsofeatures a Forward/Neutral/Reverseswitch allowing easy and fast directionalchanges that helps reducing cycle

The standard programmable automatickick-outs provide flexibility andproductivity for precise load and dumptarget heights. Tilt, lift and return-to-digkickouts are set by positioning thebucket or work tool and setting a rockerswitch in the cab.

Constant Net Horsepower. On manycompetitive machines, gross horse-power is constant, meaning that netengine power available for actual workwill vary based on demands made fromparasitic sources, such as airconditioning or cooling fans.The Cat C7 engine is electronicallyconfigured to provide constant nethorsepower at full parasitic loadenhancing productivity and improvingfuel efficiency.

Planetary Power Shift Transmission.Increases number of cycles per hour. The electronic planetary power shifttransmission with automatic shiftcapability is designed, developed and built by Caterpillar. The controlledpower shift transmission allows fullpower, very responsive directionalchanges that have a direct impact onmachine cycle times and productivity.The operator can choose betweenmanual or autoshift modes.

Variable Shift Control. Match trans-mission shifting patterns to machineapplication requirements. Variable ShiftControl (VSC) improves shift qualityand fuel efficiency in certain applica-tions by allowing the transmission toupshift at lower engine RPM.

Ride Control. The optional Ride ControlSystem improves ride, performance andload retention when traveling over roughterrain. Operators gain confidencemoving at higher speeds in load and carry operations decreasing cycle timesand increasing productivity.

Counterweight. The one-piece counter-weight is integrated into the IT62Hdesign and styling. This 1991 kg counter-weight incorporates the rear lights intothe top of the structure.

Engine Idle Management System.The Engine Idle Management System(EIMS) maximizes fuel efficiency andprovides flexibility in managing idlespeeds for specific application require-ments. Four idle control speeds areavailable.� Hibernate Mode. Idle speed drops after

a preset time to provide lower fuelconsumption, reduced sound levels andlower emissions.

� Work Mode. Adjust working idlespeeds according to customerpreference and operating conditions.

� Warm-Up Mode. Keep the engine at aconsistent temperature in coldconditions.

� Low Voltage Mode. Prevent battery drain due to high electrical loads fromattachments and accessories.

PerformanceWork Smart And Move More

7

8-Bar Linkage Design. This linkage is optimized to maximize reach,specially in applications whenmanipulating pallets with forks. This provides easiness of operationwhile approaching the truck to load the pallet

Anti-Drift Valve. The new H-Serieshydraulics feature anti-drift valve which is a load check valve to blockhydraulics to avoid lift arm and bucketdrift. Useful in application requiring aperiod of time which lift arm raised.

Special Machine Arrangements.When you have a specialized operation,you need a specialized integrated tool-carrier to be productive. The followingmachine arrangement is available forthe IT62H:

Waste Handling. Guarding and specialfeatures designed specifically for wasteapplications make the IT62H the perfectmachine for waste transfer stations,waste-to-energy plants, recyclingoperations and green waste applications.Work tools designed specially for wasteapplications can be added to the machine.

Work Tools and Quick Couplers.A variety of buckets, work tools andcouplers are available from the factoryor from your Caterpillar dealer tocustomize the IT62H for your operation.

Quick Couplers. Quick couplers provideunmatched versatility for integratedtoolcarriers. The hydraulic modelallows an operator to change attach-ments in seconds without leaving thecab. On the manual model, the operatormust lock the pins.

Buckets. Various types and sizes ofbuckets are available to match Catintegrated tool carriers to any job,anywhere, any time.

Pallet Forks. When used with a quickcoupler, pallet forks increase theversatility of the machine; ideal forhandling a variety of materials.

Material Handling Buckets. Thematerial handling bucket is a flat-floorbucket used for handling stockpiledmaterials such as aggregates or othereasy-to-load materials requiringmoderate breakout force.

Material Handling Arms. MaterialHandling Arms move pipe, concreteblocks, highway dividers and otherconstruction materials quickly andprecisely.

Woodchip and Clean-Up Buckets.Woodchip and high-capacity clean-upbuckets are available for forestry andmillyard applications.

Ground Engaging Tools (GET).Several GET options are available fromCaterpillar for the IT62H buckets.A cast corner adapter is incorporatedinto the design of the buckets thatallows a tooth to be placed on theextreme corner for protection againstbase bucket wear.

Reversible bolt-on cutting edges(BOCE) and a bolt-on half-arrowcutting edge are also available for theIT62H buckets.

The Cat K Series™ tooth systemfeatures an easier-to-install tip andprovides very secure tooth retention.No special tools are required forinstallation and removal.

VersatilityBuilt For Your Operation

8

Operator ComfortWork Comfortably And Efficiently

� Comfortable operation

� Excellent visibility

� Easy entry and exit

� Controlled vibration

Operator Environment. The IT62H maintainsthe distinction of offering the largest, mostergonomic cab in its class.

Seat. The Cat C-500 Series Comfort airsuspension seat, standard in the IT62H, is built strong and durable and is 6-wayadjustable to accommodate all-sizedoperators. The cast one-piece back and seatpan prevent protrusions under the cushions.The seat features an automotive-style lumbarsupport for maximum comfort. The right handarmrest with integrated implement controlsadjusts for comfortable, convenient operation. A heated Deluxe seat option is available foradditional comfort.

Vibration. By controlling normal machinevibrations, operator efficiency and pro-ductivity are improved. From the ground up,the Cat IT62H is designed with manyfeatures, both standard and optional, that reduce vibration.� The oscillating rear axle follows the

contour of the ground while allowing the cab to stay steady.

� The cab is attached to the frame with iso-mounts designed to reduce shock loads from the ground.

� The articulation joint is equipped with two neutralizer valves that prevent frame-to-frame contact.

� Cylinder dampening slows the bucket as it reaches the limits of travel, preventingmachine jarring.

� Ride Control is an option designed toreduce jolting and bouncing during loadand carry operations.

� Electronically controlled, automatickickouts prevent the jerking and bouncingassociated with abrupt cylinder stops.

� Air suspension seat-mounted implementcontrols reduce vertical vibrations thatcome up through the cabin floor.

Soft Detents. Allow the implement lever to return to center after actuationinstead of being held in place. Once theoperator activates the detent, the lever is released and the work tool will auto-matically move to the kickout positionand the lever will return to center.

Steering System. The conventionalsteering configuration offers a low-effort hand metering unit hydraulicsteering system. Load sensing steeringdirects power through the steeringsystem only when needed. When notsteering, more engine power is availableto generate rimpull, breakout force, lift force, and results in reduced fuelconsumption. The steering column tiltsfor maximum operator comfort.

Joystick. An optional electro-hydraulicjoystick for Tilt and Lift function isavailable.

9

Visibility. The IT62H provides excellentvisibility to both the front and rear ofthe machine. The cab has been raised by 50 mm for unmatched visibility.Excellent Visibility throughout theworking range with optimized hydraulichoses routing. Distortion-free flat glassstretches to the floor of the cab forexcellent visibility to the bucket. Wet-arm wipers on both front and back keep the windows clean in any

condition. The cab roof has channelsthat direct rain off the corners of the cab keeping windows clear. An overhang on all sides protects the operator from glare.

Rear Vision Camera. An optional rearvision camera is available to clearlymonitor movement behind theintegrated toolcarrier.

Lighting Packages. Optional lightingpackages are available for roading orlow-light applications. The optionalHigh Intensity Discharge (HID) lightsprovide exceptional lighting for nightwork. A rotating beacon is available asa safety feature.

Windshield Cleaning Package. An optional windshield cleaningpackage provides additional steps andhandrails to provide easy access forcleaning the front windows.

Entry and Exit. A ladder with self-cleaning steps keeps debris build-up to a minimum. The ladder is at a 5°forward incline for easy entry and exit.Platforms are wide allowing ease ofmovement to the front or rear of themachine. The main cab door opens a full 180° and latches in place to allow safe navigation to the rear of themachine. The right side door opens 10°,or completely for secondary exit simplyby pulling a pin. A full-length ladder on the right side facilitates safe exit if needed.

1010

ServiceabilityEasy To Maintain – Easy To Service.

� Grouped service points and sightgauges for easy daily maintenance

� Convenient access to engine compart-ment for excellent serviceability

� Swing-out grill and cooling cores for easy cleaning

� Electronic systems to monitor product health

Hydraulic Service Center. Transmissionoil and hydraulic oil filters are locatedin the Hydraulic Service Center, behindthe hinged, right-side access ladder. Thehydraulic oil tank can be drained fromthis location using the access port.� Hydraulic oil filter change interval

at 500 hours� Transmission oil filter change interval

at 1000 hours

Remote Pressure Taps. Pressure taps for the steering and hydraulic systems,transmission and brakes are groupedbehind an access panel just below theright-side service platform.

Autolube. Reduce time spent on dailymaintenance and downtime for un-planned repairs due to inadequategreasing with the optional CaterpillarAutomatic Lubrication System. Preciselubrication of pins and bushings atspecific intervals improves componentwear and reduces ground contaminationfrom excessive greasing.

S•O•S Services. Sampling valves on the IT62H allow quick access to engine,transmission and hydraulic oils forS•O•S analysis. Oil change intervalsand other services can be optimizedaccording to your work schedule,reducing downtime and managingexpenses.

Sight Gauges. Well-protected, yet easily visible sight gauges for the transmission oil, hydraulic oil andengine coolant allow easy daily checkswhile reducing the risk of contaminantsentering the systems.

Brake Wear Indicators. Axles areequipped with standard brake wearindicators, allowing a technician toeasily determine when it is necessary to service the brakes.

Electric Service Center. Batteries, relay panel and an optional tool box areconveniently located below the left-sideaccess platform. The engine shutdownswitch is housed with the relay panel. A compartment integrated into theaccess platform contains the hood tiltactuation switch, battery disconnectswitch and optional jump-startreceptacle.

Ground Level Grease Points. Grease fittings are grouped on the rightside of the machine in two convenientlocations – in a service compartmentjust below the right-side service plat-form, and a bank located just off thenon-engine end frame. These locationsfacilitate easy lubrication of vitalcomponents located throughout the machine.

11

Engine Compartment Access.The non-metallic hood on the IT62H has been redesigned and restyled fromprevious models. Side and top panels arestronger due to more robust reinforcementribs – the change in contour also adds torigidity of the hood.

Panels located behind the tires lift up andcan be removed for additional access.Roading fenders hinge from the rear and swing out allowing easieraccess to the engine compartment.

Cooling System. Access for clean-outand maintenance is outstanding. The per-forated and corrugated grill minimizesdebris build-up and swings out for easycleaning and access to the cooling cores.The full-width air conditioningcondenser and oil cooler cores swing out 45° to allow easy cleaning of the rear radiator face. Panels on eitherside provide access to the front face of the radiator and ATAAC cores foreasy cleaning.

Cab. The entire operator station can beremoved in about 45 minutes and iseasy to re-attach. Quick disconnects areused so no wires need to be cut and norefrigerant is lost.Cab cleaning is made easy withchannels on the cab floor and nothreshold at the door – the floor can beswept or mopped out easily.

Windshield Cleaning Package.An optional windshield cleaningpackage consists of two steps for theloader front frame, three additionalhandrails and two folding mirrors. This package allows access to the entirefront windshield for easy cleaning.

Complete Customer Support. Cat field service technicians have theexperience and tools necessary toservice your loader on site. Technicalexperts at the dealership and Caterpillarcan provide additional assistance tofield service technicians as needed.

When on-site repair isn’t enough, Cat dealerships are fully equipped toservice your loader quickly.

Radiator. Brazed aluminumconstruction provides a stronger jointfor maximum durability and resistanceto leaks. The 6-fins-per-inch, square-wave core design decreases the chanceof blockage and plugging.

A single mechanical lift cylinder withmanual back-up opens the hood. The tilting hood provides excellentaccess to the engine compartment, andif necessary, the entire hood can beremoved with the built-in lift points.With the hood closed, quick checks ofengine oil level and the coolant sightgauge can be completed through theside service doors.

Electric Priming Pump. An electric fuelpriming pump located on the primaryfuel filter base eliminates the need topre-fill or manually prime filters after a change, eliminating enginecontamination.

Ecology Drains. Engine, transmissionand hydraulic oils can be easily drainedwith standard-equipment ecology drains.An axle oil ecology drain is optional.

12

1

2

43

Owning and Operating CostThe IT62H – Best Value For Your Operation

� More return for your integratedtoolcarrier investment through provenCat fuel efficiency

� Sight gauges, grouped maintenancepoints, easy engine access, ecologydrains, maintenance-free batteries allsimplify daily maintenance

� Electronic monitoring systems trackproduct health to avoid unscheduledcostly repairs

� Unsurpassed parts availabilityreduces downtime

� Excellent resale value provided bygenuine Cat quality, outstandingdealer service and unmatched dealersupport programs

� Caterpillar Financial Services and Catdealers understand your business

Fuel Efficiency. Many manufacturerstout fuel consumption as one of thedetermining factors for machineacquisition, but fuel consumption isonly part of the story. Productivity mustalso play a part in the decision.

IT62H Fuel Efficiency. Customer testingof the IT62H is showing animprovement in fuel efficiency over theIT62G II. This fuel savings are achievedthrough the use of

� ACERT Technology� Caterpillar proportional-flow

load sensing hydraulic system� Engine Idle Management System

software� On-Demand Fan� Variable Shift Control� Free Wheel Stator Torque Converter

ACERT Technology Fuel Economy.Based on Caterpillar testing, the fueleconomy of Cat engines with ACERTtechnology is 3 to 5 percent better thancurrent competing technologies. This fuel economy is directly related to the complete combustion of fuel dueto the integration between the electroniccontrol that monitors conditions, the air management system that controlsair volume and the fuel injection systemthat delivers just the right amount offuel as needed.

On-Demand Fan. Temperature levels of the engine coolant, transmission oil,hydraulic oil and air inlet manifold areconstantly monitored to adjust the speedof the fan to cooling requirements.Controlled fan speed improves fuelefficiency.

Free Wheel Stator Torque Converter(FWSTC). The free wheel stator torqueconverter improves power trainefficiency in load and carry operationswhich contributes to the improved fuelefficiency of the IT62H.

1 Variable Shift Control (fuel efficiency).VSC improves shift quality and fuelefficiency in certain applications byallowing the transmission to upshift at lower engine RPMs.

2 ISO symbol for fuel efficiency3 Economy mode (typically used for

load & carry and roading applications)4 Aggressive mode (typically used for

tight truck loading applications)

Maintenance. Proper maintenance ofyour integrated toolcarrier can helpcontrol expenses and lower your owningand operating costs. The IT62H providesunmatched serviceability by offering:� Hydraulic service center� Electric service center� Well-protected, easily visible

sight gauges

13

Complete Customer SupportCat dealer services help you operate longer with lower costs.

� Ground level maintenance points� Easy access to engine compartment� Ecology drains for simple and clean

fluid drainage� Brake wear indicators for ease of

inspection� Airborne debris-resistant, swing-out

grill provides more efficient airflow

S•O•S Services. Managing componentlife and machine availability decreasesdowntime while improving your pro-ductivity and efficiency. S•O•S Servicescan help you do that. Regular fluidsampling is used to track what is goingon inside the equipment. Wear-relatedproblems are predictable and easily and quickly repairable. Maintenancecan be done according to your schedule,resulting in increased uptime andflexibility in maintenance and repairbefore failure.

Product Link. With Product Link ownerscan collect and track multiple types ofinformation – from machine locationand service meter hours, to health andproductivity information.

EquipmentManager. With a subscriptionto EquipmentManager information fromProduct Link can be transmitted to acomputer. Return on equipment invest-ment is optimized through maintenancemanagement and improved uptime.

Machine Selection. Make detailedcomparisons of the machines you areconsidering before you buy. What arethe job requirements, machine attach-ments and operating hours?What production is needed? Your Catdealer can provide recommendations.

Purchase. Consider the financingoptions available as well as day-to-dayoperating costs. This is also the time tolook at dealer services that can beincluded in the cost of the machine to yield lower equipment and owningand operating costs over the long run.

Customer Support Agreements.A Customer Support Agreement (CSA)is any arrangement between you andyour Cat dealer that helps you loweryour total cost per unit of production.CSAs are flexible, allowing them to be tailored to your business. They can range from simple PreventiveMaintenance Kits to sophisticated TotalCost Performance Guarantees. Having a CSA with your Cat dealer allows youmore time to do what you do best – runyour business.

Resale Value. Owning quality equipmentis a very important factor in maintainingresale value. Cat not only supplies qualityequipment but also provides product anddealer support to maintain the reliabilityand durability of your machine.

Caterpillar Financial ServicesCorporation. Cat Financial understandsyour business, your industry and thechallenges you face. That’s why they canprovide payment plans to fit your uniqueneeds – and to help you achieve yourgoals.

Maintenance Services. Repair optionprograms guarantee the cost of repairs upfront. Diagnostic programs suchas Scheduled Oil Sampling, CoolantSampling and Technical Analysis help you avoid unscheduled repairs.

Parts Support. You will find nearly allparts at our dealer parts counter. Withparts distribution centers worldwide,most parts can be delivered in 24 hours.Easy access to parts reduces downtime.

14 IT62H Integrated Toolcarrier specifications

Engine

Cat C7 with ACERT Technology

Gross Power 172 kW/234 hp

Net Power at 1800 rpm

ISO 9249 158 kW/215 hp

80/1269/EEC 158 kW/215 hp

Peak Torque (net) at 1400 rpm 907 Nm

Total Torque Rise 9%

Bore 110 mm

Stroke 127 mm

Displacement 7.2 liter

� All engine horsepower (hp) are metricincluding front page.

� EU Stage IIIA compliant� Rating for net power advertised based

on power available when the engineis equipped with alternator, air cleaner,muffler and on-demand hydraulic fandrive at maximum fan speed.

ROPS/FOPS

� Caterpillar cab with integratedRollover Protective Structure (ROPS)is standard in Europe.

� Rollover Protective Structure ROPSmeets ISO 3471:1994 criteria.

� Falling Objects Protective Structure(FOPS) meets ISO 3449:1992 Level II criteria.

Brakes

Meet ISO 3450:1996 standard.

Sound

� The operator sound pressure levelmeasured according to the proceduresspecified in ISO 6394:1998 is 69 dB(A)for the cab offered by Caterpillar,when properly installed, maintainedand tested with the doors andwindows closed.

� Hearing protection may be neededwhen operating with an open operatorstation and cab (when not properlymaintained or doors/windows open)for extended periods or in noisyenvironments.

� The European Union 2000/14/EClabeled spectator sound power level is 106 dB(A).

Hydraulic System

Implement System Pump Output 270 l/min

Relief lift valve setting 275 bar

Relief tilt valve setting 302 bar

Hydraulic Cycle Times seconds

Raise 6.0

Dump 2.1

Lower, Empty, Float Down 2.6

Total 10.7

� Implement system, variable axialpiston pump (rated at 2100 rpm and 69 bar)

� Cycle times with rated payload

Operating Specifications

Operating Weight 21 663 kg

Static Tipping Load, Full Turn 13 422 kg

Breakout Force 170 kN

Bucket Capacities 3.25 to 8.4 m3

� Operating weight with 3.25 m3 material handling bucket and bolt-on cutting edge.

Transmission

Forward km/h

1 7

2 13

3 23

4 38

Reverse

1 8

2 14

3 25

4 40

� Maximum travel speeds (23.5–25 tires)

Tires

23.5 R 25, L-3 (XHA MX)23.5 R 25, L-5 (XMINE MX)23.5 R 25, L-2 (XTLA MX)23.5 R 25, L-3 (VMT BS)

In certain applications (such as load and carry)the loader’s productive capabilities mightexceed the tires’ tonnes-km/h capabilities.Caterpillar recommends that you consult a tiresupplier to evaluate all conditions beforeselecting a tire model. The 23.5-25 size rangeand other special tires are available on request.

Service Refill Capacities

Liters

Fuel Tank 338

Cooling System 42

Crankcase 30

Transmission 34

Differentials and Final Drives

Front 36

Rear 36

Hydraulic Tank 110

Axles

Front Fixed

Rear Oscillating ± 13°

Maximum Single-Wheel Rise and Fall 470 mm

15

3

41489

76

11

10

13 12

2

1

5

mm

2784 0 0 0

2862 +6 +20 +14

2866 +10 -41 -29

2801 +7 -112 -79

2834 +14 -472 -335

2851 +3 +124 +88

2879 +7 +460 +326

2807 +26 +872 +619

mm mm kg kg

23.5 R 25, L-3 (XHA MX)

23.5 R 25, L-2 (VSW BS)

23.5 R 25, L-2 (VUTD2A BS)

23.5 R 25, L-2 (XTLA MX)

23.5–25, L-2 (SGGL FS)

23.5 R 25, L-3 (VMT BS)

750/65 R 25, L-3 (XLD MX)

23.5 R 25, L-5 (XMINE MX)

Tire Specifications

1 Height to top of ROPS 3452

2 Height to top of exhaust pipe 3369

3 Height to top of hood 2462

4 Ground clearance with 23.5 R 25, L-3 412

5 Bucket hinge pin height (B-pin) 4123

6 Center line of rear axle to edge of counterweight 2000

7 Wheelbase 3350

8 Bucket hinge pin height at carry (B-pin) 315

9 Center line of rear axle to hitch 1675

10 Rack back at maximum lift 58°

11 Dump angle at maximum lift 49°

12 Rack back at carry 52°

13 Rack back at ground 44°

14 Height to center line of axle 748 mm

Width over tiresChange in

vertical dimensionsChange in

operating weightChange in static

tipping load

IT62H Integrated Toolcarrier specifications

DimensionsAll dimensions are approximate

16 IT62H Integrated Toolcarrier specifications

* Static tipping loads and operating weights shown are based on standard machineconfiguration with 23.5 R 25 tires, full fuel tank, coolants, lubricants, air conditioner, ride control, toolbox, conversion arrangement CE including sound suppression, 3rdfunction, roading fenders, limited slip rear axle, quick coupler and operator.

** For buckets with adapters, tips and segments, value is measured 102 mm behind the tip of the segment, with bucket hinge pin as pivot point, in accordance with SAE J732C.

*** Light material only

8.4*** 3.8 3.4 3.25

6.8 3.0 2.7 2.5

3277 3040 2886 2886

2415 2727 2807 2841

1641 1306 1260 1226

3361 2903 2814 2767

53 60 41 41

9001 8556 8448 8402

5696 5248 5267 5220

5994 5994 5994 5994

15 225 15 580 16 000 16 061

12 584 12 965 13 362 13 422

109 151 163 170

22 272 21 900 21 696 21 663

m3

m3

mm

mm

mm

mm

mm

mm

mm

mm

kg

kg

kN

kg

Specifications

Rated bucket capacity

Struck capacity

Bucket width

Dump clearance at full lift and 45° discharge

Reach at full lift and 45° discharge

Reach with lift arms horizontal and bucket level

Digging depth

Overall length

Overall height with bucket at full raise

Loader turning radius with bucket in carry position

Static tipping load straight*

Static tipping load at full articulation

Breakout force**

Operating weight*

Material Handling Buckets

Bolt-on Cutting Edge

Bolt-on Cutting Edge

Bolt-on Cutting Edge

Bolt-on Cutting Edge

0

500

1000

1500

2000

2500

3000

3500

4000

4500

10 000 12 000 14 000 16 000 18 000 20 000 22 000 24 0000

500

1000

1500

2000

2500

3000

3500

4000

4500

8000 10 000 12 000 14 000 16 000 18 000 20 000 22 0000

500

1000

1500

2000

2500

3000

3500

4000

4500

7000 9000 11 000 13 000 15 000 17 000 19 000 21 000 23 000

31

4

2

5

7

6

8

Pallet Forks Grapple Fork (2.1 m3)

Fork tine length mm 1524 1829 2134 1177Fork width mm 2438 2540 2540 1839

1 Overall length, fork level on ground mm 9064 9486 9797 8646

2 Carriage reach, fork level on ground mm 1404 1522 1527 –

3 Tine height, minimum lift, fork level mm 82 69 78 1.5

4 Carriage reach, lift arm and fork level mm 1996 2180 2193 –

5 Carriage reach, maximum lift, fork level mm 1138 1321 1334 –

6 Tine height, lift arm and fork level mm 1757 1839 1848 1769

7 Tine height, maximum lift, fork level mm 3817 3899 3908 3829

8 Overall reach, lift arm and fork level mm 3520 4009 4327 3064

Overall height of fork at full lift and clamp open mm – – – 6731

Maximum opening across tine and clamp mm – – – 2964

Static tipping load, straight with lift arm and forks level kg 12 395 11 045 10 407 11 639

Static tipping load, full 40° turn with lift arm and forks level kg 10 637 9413 8833 9816

Operating weight* kg 21 426 21 823 22 047 22 618

* Static tipping loads and operating weights shown are based on standard machine configuration with 23.5 R 25 tires, full fuel tank, coolants, lubricants, air conditioner, ride control, toolbox, conversion arrangement CE including sound suppresion, 3rd function, roading fenders, limited slip rear axle, quick coupler and operator.

Dimensions – Pallet Forks and Grapple ForkAll dimensions are approximate

B Pi

n He

ight

(mm

)

Tilt Capacity, Tool LevelLift Capacity, Tool LevelFull Turn Static Tipping LoadStraight Static Tipping Load

1524 mm Fork 1829 mm Fork 2134 mm Fork

Load Capacity (kg) Load Capacity (kg) Load Capacity (kg)

18 IT62H Integrated Toolcarrier specifications

4

5

3

1

2

6

Hook Position Retracted Mid-Position Extended

1 Hook reach, maximum lift mm 2068 2495 2921

2 Hook height, maximum lift mm 6234 6910 7587

3 Hook reach, lift arm level mm 3961 4761 5561

4 Hook height, lift arm level mm 1828 1828 1828

5 Hook reach, minimum lift mm 2187 2688 3190

6 Hook height, minimum lift mm -1915 -2539 -3163

Static tipping load, straight kg 9627 8266 7236

Static tipping load, full turn kg 8278 7105 6218

Operating weight* kg 20 891 20 891 20 891

* Static tipping loads and operating weights shown are based on standard machine configuration with 23.5 R 25 tires, full fuel tank, coolants, lubricants, air conditioner, ride control, toolbox, conversion arrangement CE including sound suppression, 3rd function, roading fenders, limited slip rear axle, quick coupler and operator.

Dimensions – Material Handling ArmAll dimensions are approximate

Optional EquipmentOptional equipment may vary. Consult your Caterpillar dealer for specifics.

Air conditionerBuckets, quick coupler, work tools

and Ground Engaging Tools (GET)Camera, rear visionCooler, axle oilCooling, high-ambient

(with or without air conditioning)Differentials

Limited slip, front or rearNO-SPIN, rear

Drain, axle ecologyFan, auto-reversingFender extensions, front and rearFenders, narrowFenders, roadingGuard, axle seal

Guard, front window, wide or small meshGuard, power trainHeater, engine coolant, 120- or 240-voltHydraulic arrangement, three-valveJoystick control, two- or three-valveLights

directionalhigh intensity discharge (HID)roadingwarning beaconwork, cab-mounted

Machine Security SystemMirrors, externalMirrors, heated externalMirrors, heated external, foldingOpen canopy

Precleaner, turbinePrecleaner, turbine/trashProduct LinkRadio, AM/FM Weatherband (CD)Radio, CB-readyReceptacle, starting, 24-voltRemote pressure taps, transmissionRide Control System, two- or three-valveSeatbelt, 76 mm wideStarting aid, etherSteering, secondarySwitch, lift lever FNR (steering wheel)Sun visor, frontTool boxSpecial Machine ArrangementsWaste Handler Arrangement

Standard EquipmentStandard equipment may vary. Consult your Caterpillar dealer for specifics.

ElectricalAlarm, back-upAlternator, 80-amp brushlessBatteries, maintenance-free (2) 950 CCAIgnition key; start/stop switchLighting system, halogen (6 total)Main disconnect switchStarter, electric, heavy-dutyStarting and charging system (24-volt)

Operator EnvironmentBucket/work tool function lockoutCab, pressurized and sound-suppressed

ROPS/FOPSRadio-ready (entertainment) includes

antenna, speakers and converter (12-volt, 10-amp)

Cigar lighter and ashtray (12-volt)Coat hook (2) with strapsComputerized Monitoring System

Instrumentation, gauges:Digital gear range indicatorEngine coolant temperatureFuel levelHydraulic oil temperatureSpeedometer/tachometerTransmission oil temperature

Instrumentation, warning indicators:Air inlet heaterAxle oil temperatureElectrical, alternator outputEngine inlet air temperatureEngine oil pressureFuel levelFuel pressure, high/lowHydraulic oil levelParking brakePrimary steering oil pressureService brake oil pressureTransmission oil filter bypass

Controls, electrohydraulic, lift and tiltfunction

Heater and defrosterHorn, electric (steering wheel/console)Light, dome (cab)Lunchbox, beverage holders and personal

trayMirror, rearview (internally mounted)Seat, Cat Comfort (cloth) with

air suspensionSeat belt, retractable, 51 mmSteering column, adjustable angleWet-Arm wipers and washers, front and rear

Intermittent front wipersWindow, sliding (left and right side)

Power TrainBrakes, full hydraulic enclosed wet-disc

with Integrated Braking System (IBS) andbrake wear indicator

Driveline, extreme service (front)Engine, Cat C7 with ACERT technology

and air to air aftercoolerFan, radiator, electronically controlled,

hydraulically driven, temperature sensing,on demand

Filters, fuel, primary/secondaryFilters, engine air, primary/secondaryFuel priming pump (electric)Fuel/water separatorMuffler, sound suppressedPrecleaner, engine air intakeRadiator, unit coreStarting aid, air inlet heaterSwitch, transmission neutralizer lockoutTorque converter, free wheel statorTransmission, automatic/manual,

planetary powershift (4F/4R)Variable Shift Control (VSC)

OtherAutomatic work tool positionerCounterweightCouplings, Caterpillar O-ring face sealDoors, service access (locking)Ecology drains, engine, transmission and

hydraulicsFenders, steel (front and rear)Guard, crankcaseHitch, drawbar with pinHood, non-metallic, power tiltingHoses, Caterpillar XT™Hydraulic oil coolerHydraulics, two-function, pilot controlsKickout, lift and tilt, automatic

(in-cab adjustable)Linkage, 8-bar, parallel liftOil sampling valvesProduct Link readyQuick coupler, hydraulically actuatedRemote diagnostic pressure tapsService center, electrical and hydraulicSight gauges:

Engine coolantHydraulic oilTransmission oil level

Steering, load sensingVandalism protection caplocks

Tires, Rims, WheelsA tire must be selected from the mandatoryattachments section (price list). Base machine price includes an allowancebased on a premium radial tire.

AntifreezePremixed 50% concentration of ExtendedLife Coolant with freeze protection to -34°C

®

HEHL3556 (03/2007) hr

IT62H Integrated Toolcarrier

For more complete information on Cat products, dealer services, and industry solutions, visit us on the web at www.cat.com

Materials and specifications are subject to change without notice. Featured machines in photos may include additional equipment. See your Caterpillar dealer for available options.

© 2007 Caterpillar -- All rights reserved

CAT, CATERPILLAR, their respective logos, “Caterpillar Yellow” and the POWER EDGE trade dress as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.