IT G500 HardwareManual

IT-G500 Hardware Manual P.1

CASIO COMPUTER CO., LTD. Copyright © 2015. All rights reserved.

CASIO IT-G500 Series

Hardware Manual

(Version 1.0)

CASIO Computer Co., Ltd.


CASIO COMPUTER CO., LTD.

TABLE OF CONTENTS

1. OVERVIEW OF THE PRODUCTS .......................................................................................... 6

1.1. Available Models .......................................................................................................................................... 6

1.2.Options............................................................................................................................................................... 6

1.3. Accessories ........................................................................................................................................................ 7 1.3.1. Handheld Terminal .......................................................................................................................................7 1.3.2. Ethernet Cradle／USB Cradle／Cradle-type Battery Charger .................................................................7 1.3.3. Dual Battery Charger ...................................................................................................................................7 1.3.4. AC Adaptor／Power Cord／USB Cable／Flat battery cover .....................................................................7 1.3.5. Screen Protect Sheet .....................................................................................................................................7 1.3.6. Battery Pack ..................................................................................................................................................7

2.OPTIONS AND INTERFACES ................................................................................................. 8

3.1. Standard specification...................................................................................................................................... 9 3.1.1.IT-G500 ...........................................................................................................................................................9 3.1.2. Ethernet Cradle／USB Cradle ...................................................................................................................17 3.1.3. Cradle-type Battery Charger......................................................................................................................18 3.1.4. Dual Battery Charger .................................................................................................................................18 3.2. External Views ...............................................................................................................................................19 3.2.1. IT-G500 ........................................................................................................................................................19 3.2.2. Ethernet Cradle／USB Cradle ...................................................................................................................21 3.2.3. Cradle-type Battery Charger......................................................................................................................22 3.2.4. Dual Battery Charger .................................................................................................................................23 3.2.5. AC adaptor（AD-S42120C） ......................................................................................................................24 3.2.6. AC adaptor（AD-S15050B-N5） ................................................................................................................24 3.2.7. Battery Pack(HA-D21BAT-A) .....................................................................................................................24 3.2.8. Large-capacity Battery Pack(HA-D21LBAT-A).........................................................................................24

3.3.Dimensions and Weight .................................................................................................................................. 25 3.3.1.Weight ...........................................................................................................................................................25 3.3.2. Dimensions................................................................................................................................................26 3.3.3. Ethernet Cradle...........................................................................................................................................27 3.3.4. USB Cradle ..................................................................................................................................................27 3.3.5. Cradle-type Battery Charger......................................................................................................................27 3.3.6. Dual Battery Charger .................................................................................................................................27 3.3.7. AC adaptor...................................................................................................................................................27 3.3.8. Battery Pack ................................................................................................................................................27 3.3.9 Flat battery cover .........................................................................................................................................27



3.3.10. Screen Protect Sheet .................................................................................................................................27

4.QUALITY REFERENCES....................................................................................................... 28

4.1.Environmental Performances ......................................................................................................................... 28 4.1.1.IT-G500 .........................................................................................................................................................28 4.1.2. Ethernet Cradle／USB Cradle／Cradle-type Battery Charger／Dual Battery Charger.......................28 4.1.3. AC adaptor...................................................................................................................................................28 4.1.5. Battery Pack ................................................................................................................................................28

4.2. Electrical Performances............................................................................................................................... 29 4.2.1.IT-G500 .........................................................................................................................................................29 4.2.2. Ethernet Cradle...........................................................................................................................................29 4.2.3. USB Cradle／Cradle-type Battery Charger ..............................................................................................29 4.2.4. Dual Battery Charger .................................................................................................................................29 4.2.5. AC adaptor ...................................................................................................................................................29 4.2.6. Battery Pack ................................................................................................................................................29

4.3. Mechanical Performances .............................................................................................................................. 30 4.3.1.IT-G500 .........................................................................................................................................................30 4.3.2. Ethernet Cradle／USB Cradle／Cradle-type Battery Charger ...............................................................30 4.3.3. Dual Battery Charger .................................................................................................................................30 4.3.4. AC adaptor ...................................................................................................................................................30 4.3.5. Battery Pack ................................................................................................................................................30

4.4. Connection Durability (Handheld Terminal to Battery Charger and Cradle) ............................................. 31

5.OPERATING PRECAUTIONS................................................................................................ 32

(1)Operating Precautions...................................................................................................................................... 32 (A) Lithium-ion Battery Pack ...............................................................................................................................32 (B) Others...............................................................................................................................................................32 (C) About the Waterproofing/Dustproofing..........................................................................................................33

(2)Storage .............................................................................................................................................................. 34

(3)Safety precautions ............................................................................................................................................ 34

6．MAINTENANCE................................................................................................................... 34

7．SETUP AND INSTALLATION.............................................................................................. 34



specifically disclaims any express or implied warranties of merchantability or fitness for any particular purpose.

No part of this document may be produced or transmitted in any form or by any means, electronic or

mechanical, for any purpose, without the express written permission of CASIO Computer Co., Ltd. in Tokyo

Japan. Information in this document is subject to change without advance notice. CASIO Computer Co., Ltd.

makes no representations or warranties with respect to the contents or use of this manual.



Editorial Record

Manual Version no. Date edited Page Content

0.9 February 2015 All Original Version 9

GS1 DataBar Stacked Omnidirectional (RSS-14 Stacked Omnidirectional) is added.

10 Keyboard is modified. 11 Number of Wlan channels is modified. 12-13

Channel spaces and width are modified (GSM/WCDMA)

23 Dual Battery Charger is modified.

1.00 March 2015

32-34 Operating Precautions is modified.



1. Overview of the Products

1.1. Available Models

OS * Scanner Camera W-WANGPS W-LAN NFC Extension

slot Mic Receiver

IT-G500-C16E WEH6.5 Classic Laser Yes No Yes Yes Yes Yes

IT-G500-GC26E WEH6.5 Pro Imager Yes Yes Yes Yes Yes Yes

IT-G500-15E WEH6.5 Classic Laser No No Yes No No No

IT-G500-25E WEH6.5 Classic Imager No No Yes No No No

IT-G500-C26E WEH6.5 Classic Imager Yes No Yes Yes Yes Yes

IT-G500-GC16E WEH6.5 Pro Laser Yes Yes Yes Yes Yes Yes

IT-G500-G15E WEH6.5 Pro Laser No Yes Yes No No Yes

Notes

* WEH6.5 Pro ： Windows Embedded Handheld 6.5 Professional

WEH6.5 Classic ： Windows Embedded Handheld 6.5 Classic

1.2.Options

Model Product

HA-P60IO USB Cradle HA-P62IO Ethernet Cradle HA-P30CHG Cradle-type Battery Charger HA-D32DCHG Dual Battery Charger AD-S42120C-N5 AC Adaptor for Ethernet Cradle/Dual Battery Charger AD-S15050B AC Adaptor for USB Cradle/Cradle-type Battery Charger AC-CORD Power Cord HA-D20BAT-A Battery Pack HA-D21LBAT-A Large-capacity Battery Pack HA-P22FBC Flat battery cover (for battery pack (HA-D20BAT-A)), pack of five DT-380USB-A USB Cable (Cradle-computer connection) HA-N81USBC USB Cable (Handheld terminal-computer connection) HA-P90PS5 Screen Protect Sheet, pack of five


1.3. Accessories 1.3.1. Handheld Terminal

Name Remark

Hand belt (installed in the Handheld Terminal) Yes Neck Strap Yes Stylus Yes Stylus String Yes

Large-capacity Battery Pack Cover Yes Standard Battery Pack Cover is equipped with IT-G500.

User’s Guide Yes

1.3.2. Ethernet Cradle／USB Cradle／Cradle-type Battery Charger

Name Remark

User’s Guide No Refer to IT-G500 User’s Guide

AC Adaptor No Option

Power Cord No Option USB Cable No Option

1.3.3. Dual Battery Charger

Name Remark

User’s Guide No Refer to IT-G500 User’s Guide

AC Adaptor No Option

Connection Bracket Yes（one） screw Yes（two）

1.3.4. AC Adaptor／Power Cord／USB Cable／Flat battery cover

Name Remark

User’s Guide No

1.3.5. Screen Protect Sheet

Name Remark

User’s Guide No

1.3.6. Battery Pack

Name Remark

User’s Guide No



2.Options and Interfaces

IT-G500

IEEE802.11abgnModule

GSMW-CDMA/GPS

Bluetooth Module

NFC

USB Terminl(Host/Client)

microSD Card Slot

microSIM Card Slot

Battery Terminal

Power Terminal（Built-in Charge

Circnit）

802.11abgnProduct

AccessPoint

Mobile Phone Network

GPS Sate ｌiteBluetoothProduct

HeadSet

Pocket Printer

IT-G500PCISO14443

Type A,B,FelicaISO15693

USB CradleHA-P60IO

Eternet CradleHA-P62IO

Cradle-typeBattery Charger

HA-P30CHG

microSD card

microSIM card

Battery PackHA-D20BAT-AHA-D21LBAT-A

Dual BatteryCharger

HA-D32DCHG

Dual BatteryCharger

HA-D32DCHG

Dual BatteryCharger

HA-D32DCHG

AC adaptorAD-S42120C

micro USB Port

AC adaptorAD-S15050B

AC adaptorAD-S15050B

AC adaptorAD-S42120C

LAN Port

USB ClientＰＣ

LAN(Hub・Router)

USB Product

ＰＣ

USB Host

USB Client







Headset Jack

micro USB CableHA-N81USBC

Client(Serial interface

Device etc)

PC

micro USB(A)Cable

Headset



3. Hardware Specifications3.1. Standard specification

3.1.1.IT-G500

Item Specification Remark

ＣＰＵARM Cortex-A9 1.5GHz（TI OMAP4470 1.5GHz）

ＯＳWindows Embedded Handheld 6.5 ProfessionalWindows Embedded Handheld 6.5 Classic Depend of model

Memory RAM Windows Embedded Handheld 6.5(Classic/Pro) : 512MB

FROM 4GB (user area：Approximately 3GB）

Laser Scanner Laser emit angle Redirected downward at 25 degreeWave Length 645nm to 664nmOptical Output < 1mWNo. of scanning 100±20 per secondResolution 0.127mm(minimum) or graterPCS 0.45(minimum) or graterReadable distance Approximately 46mm to 550mmReadable width Max. 418mm - at 550mm depthDaylight for scanning 50,000 Lux or less

Readable bar codesymbologies

UPC-A/UPC-E/EAN8(JAN8)/EAN13(JAN13)/Codabar(NW-7)/Code39Interleaved2of5(ITF)/MSI/Industrial2of5/Code93/Code128(EAN128)/IATA/GS1 DataBarOmnidirectional(RSS-14)/GS1DataBarLimited(RSS Limited)/GS1 DataBar Expanded(RSSExpanded)/GS1 DataBar Stacked(RSS-14 Stacked)/GS1 DataBarExpanded Stacked(RSS Expanded Stacked)/GS1 DataBarTruncated/GS1 DataBar Stacked Omnidirectional(RSS-14 Stacked

C-MOS Method CMOS Imager, 832 x 640, monochromeImager Aimer method Laser 650nm, <1 mW

Laser emit angle Redirected downward at 25 degree

Resolution1D : 0.127mmStacked 2D : 0.169mmMatrix 2D : 0.191mm

PCS 0.45(minimum) or greater

Readable distance1D : Approximately 50mm to 400mmStacked 2D : Approximately 50mm to 230mmMatrix 2D : Approximately 70mm to 300mm

Readable width Max. 43mm（at 50mm depth）

Max. 276mm（at 400mm depth）

Focal distance 5.0 inches

Daylight for scanning 50,000 Lux or less

Readable 1Dsymbologies

UPC-A/UPC-E/EAN8(JAN8)/EAN13(JAN13)/Codabar(NW-7)/Code39Interleaved2of5(ITF)/MSI/ISBT/Code93/Code128(GS1-128(EAN128)/GS1 DataBarOmnidirectional(RSS-14)/GS1DataBarLimited(RSS Limited)/GS1 DataBar Expanded(RSSExpanded)/Code32/GS1 DataBar Truncated（RSS-14 Truncated）

Readable Stacked 2Dsymbologies

PDF417/Micro PDF/Composite/Codablock F/GS1 DataBar Stacked Omnidirectional(RSS-14 StackedOmnidirectional)/GS1 DataBar Expanded Stacked(RSS Expanded Stacked)/GS1 DataBar Stacked(RSS-14 Stacked)

Readable Matrix 2Dsymbologies

Aztec,DataMatrix,Maxicode,QR Code,Micro QR,

Vibrator Notification of scanning bar code



Item Specification RemarkDisplay Display device TFT

Display size 4.3 inchesNo. of dots 480 (horizontal) x 800 (vertical) WVGA See "Dead Pixels"Dot pitch 0.117mm (horizontal) x 0.117mm (vertical)Gradation 65,536 colorsDisplay font Scalable fontBacklight LED backlightViewing angle 80°(Left, Right, Up, Down)

Touch Panel Resistive expression analog touch panelPlasticGesture operationsupported

Indicator LED Indicator 1; status of charging battery pack,Indicator 2; status of communication

Input Keyboard Numeric Keys, Cursor Keys, Enter Key, Function Key. Fn KeysCLR Key, 'A' Key, Minus Key, decimal Point Key Backlight supported

Control keys Reset SwitchTrigger keys Center, L, R

Dead Pixels

The LCD panel employed in this product uses high precision and substantial number of components which commonly cause a small

number of the pixels not to light or to remain lit all the time. This is due to the characteristics of LCD panel yield in accuracy over 99.99%

and permissible.



Item Specification RemarkWLAN Standard IEEE 802.11a/b/g/n

Radio type Spread Spectrum

Modulation type

802.11a/g/n: OFDM(OrthogonalFrequencyDivisionMultiplexing）802.11b: DSSS(Direct Sequence Spread Spectrum)BPSK,QPSK,CCK,16QAM,64QAM

Emission Designation 802.11a/g/n：D1D, G1D802.11b：G1D

Frequency

＜Center frequency＞IEEE802.11a/nW52:36/40/44/48ch(5.18 to 5.24GHz)W53:52/56/60/64ch(5.26 to 5.32GHz)W56:100/104/108/112/116/120/124/128/132/136/140ch (5.50 to 5.70GHz)IEEE802.11b1 to 13ch(2.412 to 2.472Ghz)IEEE802.11g/n1 to 13ch(2.412 to 2.472Ghz)＜Frequency range＞IEEE802.11a/n5.15 to 5.35GHz(W52,W53)5.47 to 5.725GH z(W56)IEEE802.11b2.400 to 2.497GHzIEEE802.11g/n2.400 to 2.4835GHz

Baud rate802.11a/g : 54Mbps (maximum)802.11b : 11Mbps (maximum)802.11n : 65Mbps (maximum)

Communication range802.11b/g/n: 50m(indoor),150m(outdoor) (11n is 2.4GHzrange)802.11a/n: 30m(indoor),150m(outdoor) (11n is 5GHz range)

Vary depending on theenvironment condition

Number of channels802.11a/n：W52:4,W53:4,W56 : 11 (11n is 5GHz range)802.11b : 13802.11g/n : 13(11n is 2.4GHz range）

Channel spacing 802.11a/n : 20MHz (11n is 5GHz range)802.11b/g/n : 5MHz(11n is 2.4GHz range）

Channel band width 802.11a/b/g/n： 20MHz

Output power

802.11a : 14dBm (maximum)802.11b : 20dBm (maximum)802.11g : 15dBm (maximum)802.11n : 14dBm (maximum)

Other feature Roaming among Access-PointsSecurity WEP(64/128bit), WPA, WPA2WPA encrypted method TKIP, AESAuthorize method PSK, EAP-TLS, PEAP-MSCHAP-V2



Item Specification RemarkBluetooth Standard Bluetooth® Specification Ver.2.0+EDR

Radio type Spread Spectrum

Modulation Frequency Hopping Spread Spectrum ("FHSS")

Modulation type GFSK(1MbpS), Π/4-dqpsk(2Mbps), 8-DPSK(3Mbps)

Emission Designation F1D, G1DFrequency range 2.4000 to 2.4835GHz

Communication range Approx. 5mVary depending on theenvironmentconditions

Number of channels 79Channel spacing 1MHzChannel band width 1MHzOutput power Max. 4dBm (PowerClass2)

GSM Standard 3GPP release 99Features Voice, Packet Data

Data transfer Downlink： 236.8kbpsUplink： 236.8kbps

Modulation type GSM/GPRS/EDGE

Frequency range

・GSM850 Uplink : 824 to 849 MHz Downlink : 869 to 894 MHz・EGSM900 Uplink : 880 to 915 MHz Downlink : 925 to 960 MHz・DCS1800 Uplink : 1,710 to 1,785 MHz Downlink : 1,805 to 1,880 MHz・PCS1900 Uplink : 1,850 to 1,910 MHz Downlink : 1,930 to 1,990 MHz

No. of Channels

GSM850 : 124EGSM900 : 174DCS1800 : 374PCS1900 : 299

Channel spacing 200KHzChannel band width 200KHz

Output power 33dBm (850/900MHz bands)30dBm (1,800/1,900MHz bands)



Item Specification Remark

W-CDMA Standard UMTS/W-CDMA : 3GPP release99HSDPA : 3GPP release5

Communication featuresVoice, Packet data

Data transfer Downlink : 14.4MbpsUplink : 5.76Mbps

Modulation type UMTS/HSDPA/HSUPA

Frequency range

・BandⅠ

Uplink : 1920 to 1980MHz Downlink : 2110 to 2170MHz・BandⅧ

Uplink : 880 to 915MHz Downlink : 925 to 965MHz

No. of channels BandⅠ : 277BandⅧ : 152

Channel spacing 200KHzChannel band width 3.84MHzOutput power 24dBm

GPS General specification 12 channels and receiver, L1 1575.42 MHz, C/A code

Positioning system Standalone-GPS (S-GPS)

Protocol NMEA-0183

Sensitivity Acquisition sensitivity: -145 dBmTracking sensitivity : -155 dBm

micro SIM Standard ISO7816 IC Card standardGeneral specification 3V, 1.8V SIM card supported

micro SD Compatible with SDHC



Item Specification RemarkNFC Carrier frequency 13.56MHz±7kHz

Antenna Magnetic loop antenna

Field work Magnetic field strengthoutput 1.5A/m over

Compatible with ISO10373-6

Bit rate

ISO14443 Type A :106kbpsISO14443 Type B :106kbpsFelica : 212kbps,424kbpsISO15693 : 1.65kbps

Modulation ASKModulation rate 10%, 100% modulation

Read rangeISO14443 Type A/B,Felica : 0mm (Contactwith case)ISO15693 : 0mm(Contact with case) to60mm (max)*

*Reference valuebecause different withtag antenna design

Read area 20mm x 20mm Dependent on smart cardCommunication protocol Standard Y/N Tested IC card

type

ISO14443 Type A Y MIFARE Standard/MIFARE Ultralight

ISO14443 Type B Y JICSAPIt is recommended to usesmart card that is compliantwith the ISO standard.

Felica（JIS X 6319) Y FeliCa® Standard

ISO15693 Y

I・CODE SLI/I・CODE SLI-S/I・CODESLI-L/my-dVID plain/my-dLight/Tagitplus/Tag-it pro/Tag-itstandard

The data writing by Tag-it is slowly.There is the commandsthat need to retry inuser's application.

ISO18092 terminal toterminal communication N

ISO18092 card mode N



Item Specification Remarkmicro USB Connector type micro USB A-B connector

Host Baud rate Full speed (12Mbps)Power to externaldevice

voltage: 5.0V±0.25Vcurrent: 150mA

Client Baud rate Full speed (12Mbps)Pin layout Refer to ＊1Pin table Refer to ＊2

Camera Number of pixels Approximatelt 5M pixels - 2,592 x 1,944 pixelsDevice 1/4.0-type color CMOS sensorF number (Aperture) 2.8Focal distance f=3.53mm (Auto focus)Image capture range10cm to infinite

LED Light 20,900mcd Torch light modeSpeaker Warning sound, etc.Receiver For Public line and VoIP

Earphone and microphone Jack

φ3.5Pin layout is refer to *3- support "PTT" button on CTIAstandard

Microphone Voice sound input

Power/Signal terminals

＊１

＊２

Pin no. Signal Description Direction1 V CRADLE Power supply / Charge to the terminal -2 D ＋ USB D＋ IN/OUT3 D － USB D－ IN/OUT4 V BUS Power from USB cradle -5 USB_ID Switch-over between USB host and USB client IN6 GND GND -

＊３

Pin no. Description1 Audio out（Left）2 Audio out（Right）3 GND4 Microphone



Item RemarkPower Operating power

Memory backup IntegratedOperating period HA-D20BAT : Approx 11 hours

HA-D21LBAT : Approx 20 hours

Above time periods are based on theratio of cyclic operation of “Standby:Calculation: Scanning: WLAN” at20:1:1:1, and under the conditions;- Auto Power Save mode (CPU)- Backlight Off

HA-D20BAT : Approx 12 hoursHA-D21LBAT : Approx 23 hours

Above time periods are based on theratio of cyclic operation of “Standby:Calculation: WLAN” at 20:1:1, and underthe conditions;- Auto Power Save mode (CPU)

・At room temperature・New battery pack

W-WAN Waiting HA-D20BAT-A : Approx 115 hours HA-D21LBAT-A : Approx 230 hours

W-WAN continuous communication HA-D20BAT-A : Approx 150 minutes HA-D21LBAT-A : Approx 300 minutes

・At room temperature・New battery pack・W-WAN model

Memory backupperiod (with memorybackup battery only)

- Lithium battery (on-board)is fully charged.- At room temperature

Memory backupperiod (with batterypack and memorybackup battery)

- The backup period startswhen "Main battery lowwarning" appears.

Battery pack chargeperiod

- Power of the terminal isturned off while the batter isbeing charged.- At room temperature.

Memory backupbattery charge period

- Battery pack is beinginstalled in the terminal.- At room temperature.

Approx. 4 hours by HA-D20BATApprox. 7 hours by HA-D21LBATApprox. 4.5 hours by HA-D20BAT on micro USB cableApprox. 9 hours by HA-D21LBAT on micro USB cable

Approx. 4 days (for fully charged level)

Approx. 4 minutes for RAMApprox. 72 hours for RTC

SpecificationLithium-ion battery pack （Standard/Large capacity type）

Lithium battery (rechargeable)

HA-D20BAT-A : Approx 72hours for RAMHA-D21LBAT-A : Approx 72hours for RAM



3.1.2. Ethernet Cradle／USB Cradle

Specification Remark

Interface to IT-G500 Type Contact ConnectorCommunicate and powersupply to IT-G500Refer ＊１

Baud rate Full speed (12Mbps)

LAN(Ethernet Cradle only） Protocol IEEE 802.3 Standard

ConnectorUSB connector A type

1 VBus2 USB D-3 USB D+4 GND

Baud rate Full speed (12Mbps) Low speed not supported

Power toexternal device 5V±5%, 500 mA (maximum)

USB Client Connector

USB connector B type

1 VBus2 USB D-3 USB D+4 GND

Baud rate Full speed (12Mbps) Low speed not supported

Input voltage DC 12V±5％

Adaptor AD-S42120CInput voltage DC 5V±5％

Adaptor AD-S15050B

Item

Input from AC Adaptor（Ethernet Cradle）

Input from AC Adaptor（USB Cradle）

USB Host（Ethernet Cradleonly）

4

1

3

2

1 2 3 4

Pin no. Signal Description Direction1 V CRADLE Power supply / Charge to the terminal -2 D ＋ USB D＋ IN/OUT3 D － USB D－ IN/OUT4 V BUS Power from USB cradle -5 USB_ID Switch-over between USB host and USB client IN6 GND GND -



3.1.3. Cradle-type Battery Charger


Interface Type Contact Connector power supply to IT-G500Refer ＊１

Input voltage DC 5V±5％

Adaptor AD-S15050B

Item

Input from AC Adaptor

＊1

Pin no. Signal Description Direction1 V CRADLE Power supply / Charge to the terminal -2 GND GND -


Item Specification Remark Charge method Constant voltage／constant current

Approx. 2hours (for 1 pc x HA-D20BAT-A) Approx. 4hours (for 1 pc x HA-D21LBAT-A) Approx. 3.5hours (for 2 pcs x HA-D20BAT-A)

Battery charge Charge period

Approx. 7hours (for 2 pcs x HA-D21LBAT-A)

- At room temperature

Required power supply AD-S42120C - Dedicated AC adaptor

Approx. 0.8 A (with single HA-D32DCHG) Consumption current Approx. 2.4 A (with three HA-D32DCHGs

connected.)

Operating temperature Approx. 0 to 40 ºC Operating humidity 30 to 80 %RH No. of the chargers to be connected 3 pcs x HA-D32DCHG (maximum) Dimensions Approx. 110 (W) x 104 (D) x 46 (H) mm Weight Approx. 195g



3.2. External Views

3.2.1. IT-G500



No. Name Description1 Receiver *1 Voice messages are output.

2 Indicator 1

Orange : Charging battery pack.Green : Charging battery pack is complete.Red : Battery pack is abnormal or the surrounding temperature is out ofthe charging temperature range.

3 Indicator 2Flashes in blue when operating via Bluetooth or in orange when operatingvia WLAN. Lights in green when reading a bar code successfully or in redwhen alarming (programmable).

4 Touch Screen Displays text and operating instruction. Also used to operate the terminaland enter data using stylus provided.

Center Trigger Key Used to perform bar code reading. An arbitrary function can be assignedto the key.

6 Function Keys Used starting a pre-registered application.

7 Power Key Turns on and off the power.8 Execute Key Press when finishing entering numerical values or when moving to the next step.9 ‘A’ Key Changes text input mode.

10 Fn Key Used to make various settings in combination with the function keys ornumeric keys or when starting a pre-registered application.

11 CLR Key Used to clear one letter to the left of the input key.12 Microphone *1 Used to input a sound including voice sound.13 Speaker Buzzer and voice messages are output.14 Numeric Keys Used to enter numeric, decimal points, and letters.15 Cursor Key The key operates much like PC’s cursor keys.

16 Barcode Reader Laser light (Laser scanner models) or LED light (C-MOS Imager models)is emitted from this port that reads bar codes.

17 NFC Reader *2 Used to read NFC cards.18 microUSB Port For connecting to microUSB cable (HA-N81USBC).19 Headset Jack Connect Headset

L Trigger Key Used to perform bar code reading.21 microSD Card Slot For insertion of an microSD card into the slot.

R Trigger Key Used to perform bar code reading.23 Camera Lens *2 Used to capture photographs, images.24 Camera Light (Flash) *2 Used to light up an object when capturing it with the digital camera.25 Hand Belt Setting part Used to set Hand Belt in this position.26 Hand Belt Used to hold the terminal in the operator’s palm.27 Lock switch Slide at open and close cover28 Cradle Mount Holes Used to mount the terminal in cradle.29 Battery Pack Cover Used to cover the battery compartment that holds the battery pack inside.30 Strap Holes Used to attach the hand strap.31 Stylus Used to input data on the touch panel.32 Reset Switch Used to reset the terminal.33 microSIM Card Slot *3 For insertion of a micro SIM card into the slot in the battery compartment.

34 Power Supply／

DataCommunication TerminalsUsed for USB communication or to supply power to the terminal and tocharge the battery pack via either Cradle or Cradle-type Battery Charger.

22

20

5

*1. Exclude IT-G500-15E/25E

*2. Exclude IT-G500-15E/25E/G15E

*3. Only IT-G500-GC26E/GC16E/G15E



3.2.2. Ethernet Cradle／USB Cradle

No Name Description

1 USB Client PortThis port is used to transmit data (download, upload) by connecting theEthernet Cradle to PC using USB cable (DT-380USB-A). The dedicated drivermust be installed in the PC before connecting the cradle to the PC.

2 USB Host Port(Ethernet Cradle only) This port is used to connect a USB peripheral device.

3 LAN Connection Status LED(Ethernet Cradle only)

This LED shows the LAN connection status.Off: LAN cable not connected correctly.Green Flashing: LAN cable connected correctly.

4LAN Communication StatusLED(Ethernet Cradle only)

This LED shows the LAN operation status.Off: No communicationGreen Flashing: Communication in progress.

5 LAN Port（Ethernet Cradle only）

This port is used for connecting the cradle to PC or hub via LAN cable so thatdata can be transmitted (uploaded or downloaded). The special driver mustbe installed in the terminal.

6 AC Adaptor Jack Connect the dedicated AC adaptor, AD-S42120C or AD-S15050B, here

7 Selector Switch

This switch is used to switch between a USB connection and a LANconnection.LAN: LANA: USB hostB: USB client

8 Power Switch Turns on and off the power.9 Power Contacts Power is supplied to the IT-G500 via these contacts.

10 Data CommunicationContacts Used for data communications.

11 Terminal Detect Switch This switch detects when the terminal is mounted correctly on the cradle.12 Mount Hooks Use these hooks to lock the IT-G500 into the cradle

13 Power Indicator LEDThis LED indicates the power status and the mounting status of the IT-G500.Off: IT-G500 is not installed.Green: Power on, IT-G500 mounted correctly.




No Name Description1 Power Contacts Power is supplied to the IT-G500 via these contacts.2 Terminal Detect Switch This switch detects when the terminal is mounted correctly on the cradle.

3 Power Indicator LEDThis LED indicates the power status and the mounting status of the IT-G500.Off: IT-G500 is not installed.Green: Power on, IT-G500 mounted correctly.

4 Mount Hooks Use these hooks to lock the IT-G500 into the cradle5 AC Adaptor Jack Connect the dedicated AC adaptor, AD-S15050B, here




No. Name Description

1 Charge Indicator Lamp

This lamp indicates the charge status of the battery pack(s).Off: Not chargingRed: ChargingRed Flashing: Battery pack problemGreen Flashing: Standby in the out of charging temperature(0 to40)

2 AC Adaptor Jack This is used to supply power by connecting the AC adaptor (soldseparately).

3 Dual Battery Charger ConnectionPort

Use this port to connect multiple Dual Battery Chargers to eachother.

4 Connection Bracket AttachmentHoles

The connection bracket attaches here when you connectmultiple Dual Battery Chargers to each other.



3.2.5. AC adaptor（AD-S42120C）

3.2.6. AC adaptor（AD-S15050B-N5）

3.2.7. Battery Pack(HA-D21BAT-A)

3.2.8. Large-capacity Battery Pack(HA-D21LBAT-A)



3.3.Dimensions and Weight 3.3.1.Weight

Model Weight Remarks

IT-G500-C16E Approx. 250g with battery pack installed, withouthand belt and stylus.

IT-G500-GC26E Approx. 270g with battery pack installed, withouthand belt and stylus.

IT-G500-15E Approx. 250g with battery pack installed, withouthand belt and stylus.

IT-G500-25E Approx. 245g with battery pack installed, withouthand belt and stylus.

IT-G500-C26E Approx. 245g with battery pack installed, withouthand belt and stylus.

IT-G500-GC16E Approx. 270g with battery pack installed, withouthand belt and stylus.

IT-G500-G15E Approx. 270g with battery pack installed, withouthand belt and stylus.



3.3.2. Dimensions

[mm]

Imager model Laser model

Standard Flat Large




3.3.3. Ethernet Cradle


Dimensions（W*D*H mm） 110×111×103 Weight Approx. 325g

3.3.4. USB Cradle








Dimensions（W*D*H mm） 110×104×46

Weight Approx. 195g

3.3.7. AC adaptor

AD-S15050B AD-S42120C Remark

Dimensions（W*D*H mm） 50×75×30 50×111×31 mm

Weight Approx. 165ｇ Approx. 275ｇ

Not included with power cord

3.3.8. Battery Pack

HA-D20BAT-A HA-D21LBAT-A Remark

Dimensions（W*D*H mm） 52.5 ×40 ×13.5 52.5 ×40 ×25

Weight Approx. 46ｇ Approx. 86ｇ

3.3.9 Flat battery cover


Dimensions（W*D*H mm） 71.4×64×11.3

Weight Approx. 13g

3.3.10. Screen Protect Sheet


Dimensions（W*D*H mm） 58.3×96.1×0.155

Weight Approx. 1.8g



4.Quality References 4.1.Environmental Performances

4.1.1.IT-G500

Item Specification Remark/Condition

Operation -20℃～50℃ 0 to 40 ºC for charging battery Temperature

Non-operation -20℃～60℃ Operation 10%～90%RH No condensation Humidity

Non-operation 5%～90%RH

Dust and waterproof IP67 Standard

4.1.2. Ethernet Cradle／USB Cradle／Cradle-type Battery Charger／Dual Battery Charger


Operation 0℃～40℃ Temperature Non-operation -20℃～60℃

Operation 30％～80％RH No condensation Humidity Non-operation 10％～90％RH No condensation Dust and water-splash proof Not applicable

4.1.3. AC adaptor


Operation 0～40℃ Temperature Non-operation -20～60℃

Operation 20～80% No condensation Humidity Non-operation 10～90％

Dust and water-splash proof Not applicable

4.1.5. Battery Pack


Operation

Compatible with the temperature range for the terminal during discharge, or with that of the battery chargers during charge.

Temperature

Non-operationCompatible with the temperature range for the terminal

Operation

Compatible with the temperature range for the terminal during discharge, or with that of the battery chargers during charge.

Humidity

Non-operationCompatible with the temperature range for the terminal

Dust and water-splash proof Not applicable



4.2. Electrical Performances 4.2.1.IT-G500


Consumption Current

DC2.6A:IT-G500-C16E/IT-G500-C26E DC3.0A:IT-G500-GC26E/IT-G500-GC16EDC2.0A:IT-G500-25E/IT-G500-G15E DC1.6A:IT-G500-15E

4.2.2. Ethernet Cradle


Input voltage DC12V±5%

4.2.3. USB Cradle／Cradle-type Battery Charger


Input voltage DC5V±5%



Approx 0.03A Without battery Consumption Current Approx 0.8A At charging with battery

Input voltage 12V±5%

4.2.5. AC adaptor

Item AD-S42120C AD-S15050B

Input voltage AC100V/240V AC100V/240V

Output voltage DC12V DC5V

Output Current 0～3500mA 0～3000mA

Input voltage Frequency 47Hz～63Hz 47Hz～63Hz

4.2.6. Battery Pack

Item HA-D20BAT-A HA-D21LBAT-A Remark/Condition

Rated Capacity 1850mAh 3700mAh

Rated Voltage 3.7V 3.7V



4.3. Mechanical Performances 4.3.1.IT-G500


Drop Durability 1.5m 2 cycles on each of 6 faces and 4 corners

onto concrete floor

4.3.2. Ethernet Cradle／USB Cradle／Cradle-type Battery Charger


Drop Durability 75cm 1 cycle on each of 6 faces onto concrete floor



Drop Durability 70cm 1 cycle on each of 6 faces and 4 edges onto

concrete floor

4.3.4. AC adaptor


Drop Durability 70cm 3 cycle on each of 6 faces onto P-tile surface.

4.3.5. Battery Pack


Drop Durability 100cm 1 cycle on each of 6 faces onto P-tile surface.

Note:

The drop durability height is a measured value resulting from actual testing. It does not necessarily guarantee

the product from damage.


4.4. Connection Durability (Handheld Terminal to Battery Charger and Cradle)

Item Specification RemarkIT-G500 7,500 times - 4 (times/day) x 365 (days/year) x 5 (years)

Cradle-type Battery Charger 15,000 timesfor each Cradle-type Battery Charger- 2 (terminals/Ethernet cradle) x 4 (times/day) x 365 (days/year) x 5 (years)（assume update in every one or two hours.）

USB Cradle 15,000 timesfor each USB Cradle- 2 (terminals/Ethernet cradle) x 4 (times/day) x 365 (days/year) x 5 (years)（assume update in every one or two hours.）

Ethernet Cradle 15,000 timesfor each Ethernet Cradle- 2 (terminals/Ethernet cradle) x 4 (times/day) x 365 (days/year) x 5 (years)（assume update in every one or two hours.）

<Notes on Using These Products>

A limit applies to the number of times the handheld terminal can be placed in and removed from the cradle. The limit

assumes that these products are used as described above.

To exceed this limit in actual use, use multiple cradles or replace the cradle at set intervals so that the specified limit

is not exceeded for any one cradle.

Note that this information does not constitute a guarantee of any sort.

<Precautions>

Regularly clean the power-supply terminals and data communication terminals with a dry cotton bud, etc.

Soiling on the power-supply terminals and data communication terminals can cause connection defects and/or

abnormal wear.

Note that subjecting the cradle to impacts or strong vibration could dislodge the handheld terminal.

Also, place the cradle on a flat, level surface and take care when placing the handheld terminal in or removing it

from the cradle.




5.Operating PrecautionsFor information on general safety precautions, refer to the IT-G500 User’s Guide

(1)Operating Precautions

(A) Lithium-ion Battery Pack

Each lithium-ion battery pack has its life. The life span heavily depends on how the battery pack is charged or stored, and it may cause

deterioration of the battery pack to shorten the life span if it is handled improperly. After charging the battery pack, if the performance of

the battery pack does not show any recovery, it is a sign of ending the life. Replace it with a new battery pack. Note the tips below to make

the battery pack last long.

— Be sure to charge the battery pack before using it if the battery pack is used for the first time or if it has not been used for a long

period of time. When charging the battery pack, continue charging until the charge LED lights green (fully charged).

— If the battery pack is repeatedly charged, the life span becomes short. To avoid the repetition of charging the battery pack, be sure

that the remaining capacity is low before you start charging.

— Be sure to charge the battery pack in recommended temperature range. The temperature range is dependant on device you use to

charge Including battery chargers and terminals. Refer to the respective user guides. Charging the battery pack in a temperature

outside of the recommended range cause deterioration.

— When used at low temperatures, the battery pack has a reduced capacity and will supply power for shorter time. The life span of the

battery pack is also shortened.

— Charging the battery pack while the battery pack itself is freeze including inside causes deterioration. Be sure to resume an ordinary

room temperature on the battery pack and then leave it unattended for approximately one hour before charging.

— Avoid the battery pack with a full of the capacity to store for a long period of time. If you need to store it for a long period, be sure

that the remaining capacity is 30 to 50 percent and to store in a moderate low temperature. This can reduce deterioration.

— The battery pack gradually deteriorates over time. In particular, storing (or using) the fully charged battery pack at high temperatures

tends to accelerate battery pack deterioration.

(B) Others

1. The handheld terminal uses the high sensitive communication modules inside, for the better data communication, avoid using

The equipment to generate radio wave (mobile phone, etc) hear terminal. Please keep it away (more than 30 cm in case of the

mobile phone) when using it.

2. Although IT-G500 may become warm during using Public line for long time, this is normal and does not indicate a malfunction.

3. When installing a microSIM card, a microSD card check the orientation of the card and ensure

that you install it correctly. Using excessive force when installing or removing a microSIM card could damage the card.

The battery pack will not be able to be properly installed if the microSIM card is not properly installed. Reinstall the microSIM card

properly if this happens.

4. The power supplied via the USB cable is limited to 500 mA, so in some situations the battery pack may not be charged and the level

of charge may fall when the Handheld Terminal is switched on, depending on how the terminal is used.

5. Always make sure to connect the AC adaptor to the USB Cradle or Ethernet Cradle before performing communication with the

Handheld Terminal.

6. To use the GSM/W-CDMA functions, you must receive service from a wireless service provider. Available GSM/W-CDMA functions

may be dependent on the service provider to which you connect.



7. When you use the Handheld Terminal for the first time or after an extended period of no use, it may take a long time before the

Handheld Terminal determines its positioning. In such a case, operate the GPS mode where there are no obstacles in the

surroundings and wait for at least 15 minutes or longer. The GPS module integrated in the Handheld Terminal uses signals emitted

by the satellites operated by the government of the United Sates. The accuracy of positioning information you obtain on the Handheld

Terminal may be affected by the condition of these satellites. The GPS module may not be able to receive the signals in locations

such as inside a building or in a tunnel. If you are installing the device in your car, determine the installation location after making sure

that it can receive the signals.

8. To ensure compliance with local regulations, be sure to follow the regulation of the country in which the access point is installed.

9. Do not use volatile chemical substances such as thinners, benzene or toiletries to clean the Handheld Terminal.

10. When the Handheld Terminal is dirty, wipe it clean with a soft, dry cloth. Rubbing with excessive force could scratch the display.

11. The power-supply terminals and Data Communication terminals should be cleaned from time to time using an implement such as a

dry cotton bud. Soiling on the terminals may cause connection defects.

12. Take care when using chemicals.

Applying thinners, gasoline, kerosene, solvents or oils, or substances such as cleaners, adhesives, paints, medications or toiletries

that contain those materials, to the plastic case or cover may cause discoloration or other damage.

(C) About the Waterproofing/Dustproofing

Waterproofing: Performance complies with the IPX7 level set out in the IEC standards

(waterproof for 30 minutes at a depth of 1 meter in still tap water at normal temperature).

Dustproofing: Performance complies with the IP6X level set out in the IEC standards.

・ Check that there is no dust, sand or other foreign matter on the battery pack cover, microSD card slot cover or on the respective

contact surfaces. If any soiling is found, wipe it off with a clean, soft, dry cloth. Even very small amounts of soiling trapped on the

contact surfaces (a single hair or grain of sand, etc.) can cause water to leak into the device.

・ Check that the waterproof seals on the battery pack cover and microSD card slot cover are free from cracks and other damage.

・ Close the battery pack cover lock switch firmly until you hear it click into place.

・ Avoid opening and closing the battery pack cover or microSD card slot cover in locations near water or exposed to sea breezes,

and do not open or close them with wet hands.

・ Do not drop this product or leave it in locations exposed to temperatures outside the specified range.

Doing so could impair its water- or dust-proofing.

・ The accessories for this product(battery pack, etc.) and optional products are not water- or dust-proof.

・ Subjecting this product to a severe impact could render it no longer water- or dust-proof.

・ If any water leaks into the product as a result of carelessness or inattention during product handling,

CASIO cannot be held liable for compensation for any damage to internal components (battery, recording media, etc)

or for the costs of recorded content or the recording thereof.

・ CASIO COMPUTER CO., LTD. accepts no other liability whatsoever for any accident that occurs due to water leakage.

・ Be careful the use in the rain.



(2)Storage

1. During the long-term storage, please remove the battery.

2. Avoid keeping to store in high temperature location (ex, in the car).

(3)Safety precautions

Conform to user’s Guide.

6．Maintenance There are no parts for exchanging and checking regularly.

7．Setup and Installation Adhere to the notes, perform the appropriate setup and operation.



Notes

— Do not use or replicate of this software and manual without permission.

— This software and manual can be used only under license agreement for this product.

— CASIO COMPUTER CO., LTD. accepts no other liability whatsoever for any accident that occurs due to the results from the use

of this software and manual.

— The specifications of this software and the contents of this manual may be changed without notice.

— The copyright of this manual are the property of CASIO COMPUTER Co., ltd.

IT-G500 Hardware Manual Ver.1.0 March 2015

© 2015 CASIO COMPUTER CO., LTD. Bluetooth is a registered trademark owned by Bluetooth SIG, Inc. and licensed to CASIO COMPUTER CO., LTD. Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or

other countries.

Documents

IT G500 HardwareManual