ISTAM 2019 Programme Schedule - Indian Institute of Technology … 2019_Tentative Schedule... · Suman Pal, Axisymmetric free vibration behaviour of BFGM rotating micro-disk based

ISTAM – 2019 Programme Schedule

Day 1: December 9, 2019

Time (hrs.) Event Venue

8:00 – 9:00 Registration

Community Centre

9:00 – 10:30 Inaugural Function

10:30 – 11:00 High Tea

Lecture Name Speaker Title of the Lecture Session Chair

11:00 – 12:00 Prof. P.L. Bhatnagar Memorial Lecture Prof. Guirong Liu, University of Cincinnati, Ohio Smoothed Finite Element Methods and Big-Data for Effective Simulation of Biological Systems: Soft, Fluidic, Interactive and Adaptation

Prof. P.V.S.N. Murthy, IIT Kharagpur

12:00 – 13:00 Prof. B.R. Seth Memorial Lecture Prof. S. Kapuria, IIT Delhi Wave Packet Enriched Finite Elements for Multi-field Wave Propagation Problems in Solids under Narrowband to Broadband Excitations

Prof. D. Maity, IIT Kharagpur

13:30 – 14:30 Lunch Break SMS

Time (hrs.): 14:30 – 16:30 Invited Lectures and Technical Sessions

TS-1/Venue: SMS – 219 TS-2/Venue: SMS – 221 TS-3/Venue: SMS – 115 TS-4/Venue: SBS – 004 TS-5/Venue: SBS – 017 TS-6 @ SMS – 319

Session Chair: Prof. Guirong Liu Session Chair: Prof. A. Mandal Session Chair: Prof. Sasidhar K. Session Chair: Prof. T. Raja Sekhar Session Chair: Prof. Rathish Kumar Event details Event details Event details Event details Event details Event details

Invited Lecture

Prof. M. M. Mahapatra, IIT Bhubaneswar Title of the Talk: Residual stress in structures

Invited Lecture

Prof. S.K. Mahapatra, IIT Bhubaneswar Title of the Talk: Introduction to Bio-heat transfer

SM1/ PID-71

M. Pradhan, Static Stability Investigation of a Symmetric Sandwich Beam Tapered along width and thickness

SM2/ PID-310

K. S. Shivakumar Aradhya, Vibration Characteristics of Non-uniform Curved Beams – A Finite Element Study

FM7/ PID-4

Ramesh Chandra Nayak, Experimental and theoretical investigation of natural convection heat transfer in heated vertical tubes

FM10/ PID-42

Juhi Kesarwani, A mathematical study of counter-current imbibition in oil recovery process

FM7/ PID-54

Rony Kar, Effect of Aspect Ratio of Octagonal Plan Shaped Building in Wind Interference Condition

SM1/ PID-104

P.K. Parhi, Vibration of delaminated composite plates in thermal environment

SM2/ PID-18

Ankit Malik, Void Growth in a Class of Rubber Toughened Amorphous Glassy Polymers

FM7/ PID-9

Pentyala Srinivasa Rao, Numerical study of inclined stretchable partially heated enclosure filled with nanofluid

FM10/ PID-97

Subhadra Mishra, Wave reection from a multi-step vertical porous structure with di erent porosities

FM7/ PID-56

Shanku Mandal, Effect of aerodynamic modifications on a tall building with irregularity in plan shape

FM10/ PID-14

Om Prakash Meena, Mixed convection nanofluid flow over a vertical wedge saturated in porous medium

SM1/ PID-145

Marali Hrushikesh Maharudra,

SM2/ PID-24

Shantashree Jena, Rotordynamic Analysis of High-speed Complex

FM7/ PID-12

Prasanna S. V. S. N. D. L.,

FM10/ PID-125

Ayan Chanda, Elastic bottom effect on water wave scattering

FM7/ PID-59

E. Vignesh, Entropy Generation in Natural Convection of

FM13/PID-28

Aurabinda Swain,

Effect of spew fillet on interlaminar stresses of adhesive bonded Spar-Wingskin joint

Shape Rotor used in Cryogenic Turboexpander

Estimation and stimulation of pressures on the profile of the Spillway

by two submerged thin vertical porous plates

Nanofluid inside a Square Open Cavity Having Solid Block

Effect of Marangoni and Natural convection during Laser Melting

SM1/ PID-159

D. Muniraj, Numerical investigation of functionally graded plates under low and high velocity impact loads

SM2/ PID-64

Manushi Gupta, On the propagation of harmonic plane wave under modified Green-Lindsay thermoelasticity theory

FM7/ PID-27

Jegatheesan M., Comparative study on the effect of forced convection and natural convection on nanoparticle distribution

FM10/ PID-133

S N. Gaikwad, Onset of Double Diffusive Convection in a Maxwell Fluid Saturated Anisotropic Porous Layer with Soret Effect

FM7/ PID-60

S. Gowtham, Investigation of natural convection of ferrofluid in a parallelogrammic enclosure with a heat source

FM7/ PID-39

Bairagi A.K., Slot effect of wind load on square plan shaped tall building

SM1/ PID-162

Ankita Mohanty, Joining and microstructure analysis of Aluminum sheets by Friction Stir Welding

SM2/ PID-65

Harendra Kumar, Analytical solution for thermoelastic damping in micro-beam resonators

FM7/ PID-37

N. Sitaram, Computational Investigation of Calibration Characteristics of a Nine Hole Probe

FM10/ PID-172

R. B. Kaligatla, A wave-dissipating porous breakwater in water of uneven depth

FM7/ PID-61

S Priyadharshini, Entropy Generation and Natural Convection in a Nanofluid Filled Square Cavity Having Heat Generating Solid Body

FM13/PID-82

S.Shankar Narayan, Study of behavioural change in blood flow from Non-Newtonian to Newtonian

SM1/ PID-167

Raj B. Bharati, Free vibration of rotating laminated composite structures using Carrera Unified Formulation

SM2/ PID-66

D. Pandit, Simulation of Pseudo-elastic Effect in A Shape Memory Alloy Beam

FM7/ PID-41

Kamala Kumar Pradhan, Boundary layer flow of nanofluid over a continuous moving plate with the effect of electrification of particle

FM10/ PID-192

Santanu Koley, Flow Through Porous Media Multidirectional irregular waves scattering by trapezoidal porous breakwater

FM7/ PID-62

Pradeep Kumar Behera, Computational Investigation of Flow in 2 Dimensional Turbine Cascade

SM4/ PID-105

Arpita Das, Elastic behaviour of nano composite cemetitious material using various nanopolymer

SM1/ PID-260

Ankita Mohanty, Joining of Aluminum sheets by Friction Stir Welding and microstructure analysis

SM2/ PID-67

Om Namha Shivay, An investigation of the Moore-Gibson-Thompson thermoelasticity theory

FM7/ PID-45

Manish Desai, Computational Investigation of Effect of Hole Angle on Calibration Characteristics of a Seven Hole Probe

FM10/ PID-224

Tapan Kumar Hota, Effects of Viscosity Profiles on Localized Miscible Fluid in a Porous Media

FM7/ PID-63

Surabhi Nishad, EFGM simulation of Natural Convection within a Wavy Square Enclosure with line heat source filled with nanofluid

SM8/ PID-111

Dev Kunwar Singh Chauhan, Tracking of Special Objects with Parallel Manipulator using Inverse Kinematics Approach

SM3/ PID-16

Sanjukta Das, Controllability of a nonlocal impulsive stochastic damped second-order delay differential equation

SM2/ PID-69

Robin Vikram Singh, An investigation on strain and temperature rate-dependent thermoelasticity and its infinite speed behavior

FM7/ PID-46

Arghyadip Das, Effect of Changing Aspect Ratios on Corner Recessed Square Tall Building under Wind Excitation

FM10/ PID-259

Santanu Koley, Multidirectional irregular waves scattering by trapezoidal porous breakwater

FM7/ PID-70

Hitesh Kumar Sinha, Aerodynamic Analysis of Helium Lubricated Gas Foil Journal bearing

SM3/ PID-182

Jayant Prakash Varun, Modal analysis and active vibration control of laminated graphite/epoxy

SM2/ PID-74

A. K. Jha, Thermoelastic analysis of rotor

FM7/ PID-47

Rahul Venkatesan, Effect of Flow Control Devices in modified Axisymmetric Hypersonic

FM10/ PID-285

Siddabasappa C, Effect of Local Thermal Non-Equilibrium in temperature

FM8/ PID-165

Garima Varshney, Numerical Simulation of Vapour Bubble Ebullition from Discrete Cavity during Pool Boiling


16:30 – 16:45 Tea Break SMS/SBS

17:30 – 18:30 Lecture Name Speaker Chairperson

Community Centre Prof. A.S. Gupta Memorial Lecture Prof. B.V. Rathish Kumar, IIT Kanpur

Prof. Jitesh Gajjar

Day 2: December 10, 2019 (Tentative)

Time (hrs.): 9:00 – 11:00 Invited Lectures and Technical Sessions

TS-7/Venue: SMS – 219 TS-8 @ SMS – 221 TS-9 @ SMS – 115 TS-10 @SMS – 319 TS-11 @SBS – 004

Session Chair: Prof. B. Pattabhi Ramaiah Session Chair: Prof. M. M. Mahapatra Session Chair: Prof. Yogesh Bhumkar Session Chair: Prof. P.K. Parhi Session Chair: Prof. Vasudev Rao Allu

Event details Event details Event details Event details Event details

Invited Lecture 6

Prof. Title of the Talk:

Invited Lecture 7

Prof. V. Pandu Ranga Title of the Talk:

Invited Lecture ed L ecture 8

Prof S.V. Raghurama Rao, IISc Title of the Talk: A CFD algorithm for ideal, real and dense gas flowstle of the Talk:

Invited Lecture 9

Prof. Title of the Talk:

Invited Lecture vited Lecture 10

Prof. Rajendra Kumar Ray Title of the Talk: Structrual bifurcation analysis of Shear Flow bullf bodies

SM5/ PID-140

S D Raiyani, Experimental Study on Torsional Strengthening of RC Flanged Beam using Stainless Steel Wire Mesh

SM6/ PID-68

C. Arvind, Prediction of Crack Formation in applications involving Mechanical Structural Elements using Taylor's Series

FM7/ PID-175

H.P. Rani, Aspect ratio effects of left heated 2D Lid driven Cavity using Energy streamlines

SM2/ PID-95

Anirban Akhuli, Robust cost optimization of shallow foundation with uncertain-but-bounded type parameters

FM13/ PID-181

Motahar Reza, Numerical Experiment on H-Type Fin and Tube Heat Exchanger by Passing Coolant through the Tubes and blowing colder air across Fin

SM5/ PID-150

Ankita Mohanty, Theoretical and theoretical and experimental study of drill bit dynamics

SM6/ PID-122

Vishwanil Vishwanath Sarnaik, Effect of stacking sequence and hybridization in Lap shear joint made with laminated composite materials

FM7/ PID-176

H.P. Rani, Unsteady Rotating Fluid Flow past a Vertical Cylinder under Influence of uniform Magnetic Field

SM2/ PID-113

Sourav Banerjee, Static Bending Analysis of Micro-sized Euler-Bernoulli and Timoshenko Beam with Modified Couple Stress Theory

FM13/ PID-20

Eadala Sarath Yadav, Relay Based identification and control of SISO process –An experimental approach via conical tank

SM5/ PID-157

Sunil Manohar Maharana, Impact of Layering Sequence and Nanofiller Reinforcement on the Mechanical and Interlaminar Fracture Toughness

SM6/ PID-163

Umed Singh, Failure analysis of quasi-brittle materials using cohesive zone model assisted XFEM

FM7/ PID-187

Subhashree Panda, Boundary Layer Flow Of Nanofluid Over A Moving Plate With Viscous Dissipation And Electrification Of Particles

SM2/ PID-119

Ravi Jangid, A Finite Element Study on Buckling of Thin Walled Steel Hollow Sections Using Geometric and Material Nonlinearity

FM13/ PID-25

Panduranga K., Hypersingular integral equation approach for submerged flexible membrane in finite water depth

SM5/ PID-263

Ankita Mohanty, Theoretical and Experimental Study of Drill Bit Dynamics

SM6/ PID-164

Aakash Soni, Crack Propagation Study in a Cortical Bone Using Extended Isogeometric Analysis

FM7/ PID-209

Ram Prakash Sharma, Heat and mass transfer effect of MHD rotating fluid past a vertical surface with variable thermal conductivity

SM2/ PID-123

Suman Pal, Axisymmetric free vibration behaviour of BFGM rotating micro-disk based on modified couple stress theory

FM13/ PID-36

Amandeep Kaur, An algebraic least square method for the solution of diffraction of water waves by a series of two asymmetric trenches

SM5/ PID-282

K. Rishwanth, Analysis of glass fiber reinforced epoxy based composite repair systems in the repair of corroded steel pipelines

SM6/ PID-220

Pankaj P. Desai, Inverse Problem of Beam with Inclined Edge Crack

FM7/ PID-216

Sri Ramya, Analysis and stimulation of flow over stepped sipllways using ANSYS-CFD

SM2/ PID-128

S. S. Godara, Effect of interface on Hybrid Nano Composites

FM13/ PID-58

S. Chakraborty, Weakly nonlinear stability analysis for a salt-finger convecting layer

SM5/ PID-287

P. Nitheesh Kumar, Design and Development of a repair methodology for the live repair of through thickness corrosion/leaking defects

SM6/ PID-228

Ajinkya R. Dusane, Crack growth studies in laminated composites using coupled cohesive zone and phase field approach

FM7/ PID-217

G. Krishna Veni, A RBF based partition of unity method for unsteady incompressible viscous flows

SM2/ PID-138

K. Udaya Bhaskara Reddy, Strain energy based and Frequency based topology optimization of laminated composite

FM13/ PID-134

M. A. Rawoof-Sayeed, Finite Amplitude Cellular Convection under the Influence of a Vertical Magnetic Field in Liquid Gallium

SM5/ PID-289

Y. Subbalakshmi Accelerated environmental assessment of polymeric composite material used to repair pipelines

SM6/ PID-230

S.D.V.S.S. Varma Siruvuri, Studies on influence of cracks on the performance of photovoltaic solar cells: MD simulations

FM7/ PID-234

Bapuji Sahoo, Higher Order Compact Scheme for Flow Past a Spinning Higher Order Compact Scheme for Flow Past a Spinning

SM2/ PID-142

Geetha L., Performance prediction of GGBFS modified concrete bridge using ANSYS

FM13/ PID-141

M. K. Chaube, Effect of electro-osmotic slip velocity on flow of a micropolar fluid through a flexible tube

SM5/ PID-309

Amruta Ranjan Behera, Experimental demonstration of the super stable second mode excitation in buckled micro-beams

SM6/ PID-240

Ranjan K. Behera, Effect of combined tensile-torsional loads on the structural integrity of adhesively bonded curved laminated FRP composite single lap join

FM7/ PID-276

Shalini Singh, Higher Order Compact (HOC) Solution For Solute Transport Along and Against the Groundwater Flow

SM2/ PID-146

Manash Malik, Free flexural vibration analysis of rotating nano-beam using non-local theory

FM13/ PID-158

D. M. Surwase Soret Effect on the Onset of Convective Instabilities in Binary Nanofluids with fast Chemical Reaction

SM6/ PID-19

Md Intaf Alam, Effect of crack tip shape on fatigue crack growth in plastically compressible hardening solids

SM3/ PID-223

K. K. Bera, Active control of futter of a cable-stayed bridge using winglets

FM7/ PID-77

Sukanya Padhi, Implicit finite difference solution of MHD flow analysis of a second grade fluid over a linearly stretching sheet

SM2/ PID-148

Surya Dutta Aravapalli, Robust design optimization of underground concrete tunnel subjected to seismic excitation.

FM14/ PID-38

Natasha Sharma, Far - from - equilibrium stochastic bidirectional transport systems with constrained entrances



Time (hrs.): 11:15 – 13:30 Technical Sessions

TS-12 @ SMS – 219 TS-13 @ SMS – 221 TS-14 @ SMS – 115 TS-15 @ SBS – 004 TS-16 @ SMS – 319

Session Chair: Prof. P.K. Mahato, IIT (ISM) Session Chair: Session Chair: Prof. S. N.Panigrahi Session Chair: Prof. Sunanda Saha, Dayananda Sagar University

Session Chair:


SM2/ PID-178

Bhakti N. Patel, Post-buckling involving large deflection of micro-cantilever using the consistent couple stress theory

SM8/ PID-7

Unnikrishnan S. Nair, Stability of steady frictional sliding at an interface between viscoelastic solids

SM2/ PID-83

Ajeyo Mukherjee, On some aspects of stress distribution scenario within the earthen dams under static loading condition

FM7/ PID-49

Amlan Kumar Bairagi, Comparative study of power spectra between square and setback building due to wind load

SM8/ PID-112

Viswas Andrews, Design and Development of Flapping Wing Dynamic Simulator

SM2/ PID-190

Tripuresh Deb Singha, Free vibration characteristics of pretwisted FGM sandwich conical shells in thermal environment

SM8/ PID-85

Gudlavalleti V V S Vara Prasad, Magneto-elastic effects in non-Newtonian ferrofluid droplet impact

SM2/ PID-90

Pankaj Chauhan, Estimation of Elastic moduli of defective Multi-walled Carbon Nanotubes by Finite Element Approach

FM7/ PID-50

Gayathri Bolugoddu, Computational Investigation of Effect of Hole Angle on Calibration Characteristics of a Five Hole Probe

SM8/ PID-132

A. Srivastava, Influence of viscoelasticity on reflection of three dimensional plane waves in highly anisotropic medium

SM2/ PID-191

Shashank Pandey, Bending Analyses of Skew Laminated Composite Plates using a Higher-Order Layerwise Theory

SM8/ PID-86

Machha Rajesh, Pulse controlled engine

SM2/ PID-91

R. Lalthlamuana, Updating model parameters of a bridge using heterogeneous field test data

FM7/ PID-53

Pritam Majumder, Significance of Duct Position in Combine Effect of Propeller Boss Cap Fin (PBCF) and Propeller Duct to Improve Efficiency

FM12/ PID-152

Raghunath Patra, Thermal Transport of Elecyromagnetohydrodynamic flow of Casson-nano fluid through a Porous Microtube under the effect of Streaming Potential

SM2/ PID-195

Kavikant Mahapatra, Effect of Coupling Conditions on the Vibration Characteristics of an L-Shaped Built-up Isotropic Plate Structure

SM8/ PID-107

B.K Tiwari, Mechanics Driven Simulation Based Design and Analysis of Variable Buoyancy System for Depth Control of AUVs

SM2/ PID-151

Rakesh Dangal Deore, A Computational (FEM) Analysis of Single Point Incremental Forming (SPIF) of a Steel Alloys Using Roller Ball Tool

FM7/ PID-80

Sarvalogapathi. S., Numerical study on flow past circular cylinder with strakes

SM2/ PID-173

Prashant Kumar Choudhary, Thermal buckling analysis of laminated composite plates containing an elliptical cutout

SM2/ PID-214

Pradeeptta Kumar Taraphdar, Evaluation of through-thickness residual stresses in narrow gap dissimilar weld joint of ferritic to austenitic stainless steels

SM8/ PID-124

Narendra Kumar Kolla, Design and Development of Dual Arm Mobile Robotic Platform for Warehouse Applications

SM2/ PID-154

Pankaj Chauhan, Estimation of Elastic moduli of defective Multi-walled Carbon Nanotubes by Finite Element Approach

FM7/ PID-298

Gayathri M., Effects of Magnetic Field and Internal Heat Generation on Triple Diffusive Convection in an Oldroyd-B Liquid

SM5/ PID-180

Saibal Kanchan Barik, Effect of impact loading on the deformation behaviour of AA 5052-H32 sheet

SM2/ PID-222

Royal Madan, Stresses and limit elastic speed of P- FGM rotating disks

SM8/ PID-170

R. Yogeshwar Rao, Motion planning of serial manipulator using pseudoinverse Jacobian method

SM2/ PID-174

Abhishek Mishra, A DML based artificial neural network approach to solve transient wave equations using the collocation method

FM7/ PID-299

Sumana Krishna Prasad, Numerical Solution of MHD Nanofluid Flow over a Permeable Stretching Sheet using Haar wavelets

SM5/ PID-185

Saibal Kanchan Barik, High velocity forming behaviour of metallic sheet thorugh impact loading using a shock yube

SM2/ PID-235

Ramit Ashutosh Machhan, Investigation of different types of damping effects for automotive components –Preliminary work

SM8/ PID-179

Rohan Vailala Thoma, Design and development of mobile manipulator for space application

SM2/ PID-256

Kuldeep Sharma, Distributed Dislocation Technique for Study of Modified Polarization Saturation Models in Finite Piezoelectric Media

FM7/ PID-300

Acha C. S., Numerical Solution of MHD Stagnation Point Casson Fluid Flow with Partial Slip using Haar wavelets

FM6/ PID-225

D.Siva Krishna Reddy, Numerical Prediction of aerodynamic and Magnus coefficients of a supersonic spinning artillery projectile

SM2/ PID-251

Shivam Sharma, Deep machine learning approach for the design of smart interphase in nacre-like structures

SM8/ PID-193

T.Siddharth, Development of prosthetic knee joints for developing countries: a review

SM2/ PID-265

Chellapilla Kameswara Rao, Torsional Buckling of Thin-Walled Beams of Open Section Resting on Variable Winkler Foundation

FM10/ PID-227

Rashmi Dubey, The onset of double-diffusive convection in a fluid-saturated inclined porous layer with permeable boundaries

SM2/ PID-252

Rajneesh Awasthia, Optimisation studies of piezoelectric energy harvester using deep machine learning

SM8/ PID-257

S. Deepak Kumar, Development of a 6-DOF Parallel Robotic Cell

SM2/ PID-254

Srinivasu Chadaram, Evaluation of stress intensity factors (SIF) for elliptical crack in Piezoelectric material (PZT-5H) using XFEM

FM10/ PID-305

B.Mallikarjun, A study of Cu/Ag nanoparticle based heat transfer augmentation in Darcy Brinkmann Forchheimer flow in square cavity



Time (hrs.): 14:30 – 16:30

Technical Sessions

TS-17 @ SMS – 219 TS-18 @ SMS – 221 YSAS @ SMS – G22 TS-19 @ SBS – 004 TS-20 @ SMS – 319

Session Chair: Session Chair: Session Chair: Session Chair: Session Chair:


SM2/ PID-267

N. V. Swamy Naidu, Buckling analysis of FG circular columns based on Weak finite element formulation

SM6/ PID-26

S. K. Panda, Adhesion failure resistance techniques in T-type composite joints

SM7/ PID-8 Mriganka Shekhar Chaki,

Anti-plane waves in piezoelectric materials with surface elasticity

FM7/ PID-246

Subharthi Sarkar, Influence of magnetic field in controlling Taylor Column in the slow translation of a sphere in a rotating fluid

SM7/ PID-226

Apurba Das, Natural frequencies of porous exponential functionally graded conical shell under rotation

SM2/ PID-272

Aswathy M., Stochastic meshless method for Euler-Bernoulli beams with spatially varying Young’s modulus

SM6/ PID-30

Shushant Singh., Effect of crack tip radius on fatigue crack radius growth in plastically compressible hardening solids

FM7/ PID-32

S.Anitha, Heat transfer capability of CNT-TiO2 /water hybrid nanofluid flowing in cylindrical tube

FM7/ PID-248

D. Siva Krishna Reddy, Computational studies of mixing process in domestic cooking LPG stove

SM6/ PID-229

Alok Negi, Modeling size effects in quasi-brittle materials using a smoothed stress-based localizing gradient damage model

SM2/ PID-290

Arya Prakash Padhi Phase Field Topology Optimization Considering Geometric Nonlinearity

SM6/ PID-44

Vaibhav Sonkar, XFEM Simulation of Cracked 3D Domain Graded in Parallel and Perpendicular Direction

SM7/ PID-114

Kaustav Bakshi, A Nonlinear Finite Element Failure Study of Laminated Composite Cylindrical Shell Panels

FM7/ PID-262

Subhashree Panda, Boundary Layer Flow Of Nanofluid Over A Moving Plate With Viscous Dissipation And Electrification Of Particles

FM7/ PID-293

Maria Anncy S., Study of Linear and Non-linear Analysis of Suction-Injection-Combination on the onset of Rayleigh-Bènard-Chandrashekar convection in a Micropolar Fluid over a Porous Medium

SM2/ PID-297

K. S. Shivakumar Aradhya, Vibration Characteristics of Non-uniform Curved Beams – A Finite Element Study

SM6/ PID-284

Nitheesh Kumar P., Failure Analysis of Composite Repair of Corroded Steel Pipelines subjected to Cyclic Loading

FM4/ PID-186

A Karthik, Statistical Analysis of the Mathematical Models for Blood Flow in Arteries

FM7/ PID-268

Chandan Kumar, Flow Analysis Over Supercritical Airfoil with and without Slotted Flap

SM2/PID-307

Rupinderjit Kaur, Infuence of irregular geologies and inhomogeneity on SH-wave propagation

SM6/PID-286

P Nitheesh Kumar, Failure analysis of composite repair of through thickness corrosion/leaking defects in corroded steel pipelines subjected to short term static pressure loading

FM7/ PID-275

Ansa Mathew, Effect of double-frequency gravity modulation on the onset of Rayleigh-Bénard convection

FM7/ PID-269

Rajdip Paul, Wind Effects on Cross Plan Shaped Tall Building

SM2/ PID-308

Ansuman Padhi, Comparative study of mechanical behaviour of Basalt fibre reinforced sandwich composites

SM3/ PID-266

R. Suresh Kumar, Active Damping of Laminated Composite Cylindrical Panels Composed of Fuzzy Fiber Reinforced Composite layers

FM7/ PID-278

Neha Aanam A, Study thermorheological and magnetorheological effects in a ferrofluid with roatation modulation

FM7/ PID-57

Prasanna S. V. S. N. D. L., Evaluation and simulation of minor losses using ANSYS-CFD

SM2/ PID-315

Vaishali, Radial basis function based probabilistic dynamic stability of doubly curved shells

SM4/ PID-253

Sumit Kumar Vishwakarma, Love wave dispersion in an inhomogeneous Earth’s crust lying over a pre-stressed inhomogeneous mantle

FM13/ PID-279

Sushma T. S., Study of Rayleigh- Bernerd Brinkmann convection in enclosures using center manifold theory

FM7/ PID-283

Mohammad Athar Khan, Effect of thermal buoyancy on vortex induced vibration of square cylinder

FM2/ PID-247

D. Siva Krishna Reddy, CFD Studies of Rocket Nozzle Flows with Supersonic Film Cooling

FM7/ PID-291

S. Pranesh, Linear and non-linear analyses of sinusoidal and non- sinusoidal time dependent Coriolis force modulation on the onset of triple-diffusive convection

FM10/ PID-280

Lakshmi K. M., Regular and chaotic convection of hybrid nanoliquid confined in low-porosity cylindrical enclosures

FM7/ PID-281

Meghana J., Effect of Sinusoidal and non-Sinusoidal Gravity modulation on Rayleigh-Bénard Ferroconvection in Couple Stress Fluid



17:00 – 18:00 Lecture name Speaker Chairperson Community Centre

Prof B. Karunes Memorial Lecture Prof Rama Govindarajan, International Centre for Theoretical Sciences, TIFR

Prof. Jitesh Gajjar

Day 3: December 11, 2019 (Tentative) Time (hrs.): 9:00 – 11:00

Invited Lectures and Technical Sessions

TS-21 @ SMS – 219 TS-22 @ SMS – 221 TS-23 @ SMS – 115 TS-24 @ SBS – 004 TS-25 @ SBS – 017

Session Chair: Prof. P. Rath Session Chair: Session Chair: Prof. D. Maity Session Chair: Session Chair:


Invited Lecture

Prof. Suman Chakraborty, IIT Kharagpur Title of the Talk: Phase-field Modelling and CFD

Invited Lecture

Prof. Amit Agrawal, IIT Bombay Title of the Talk: Quest for Equations beyond the Navier-Stokes

Invited Lecture

Dr. B. Santosh, VSSC, ISRO, Trivandrum Title of the Talk: Evolution of Composite Structures for Launch Vehicles

FM8/ PID-29

Subhakanta Moharana, Mathematical Modelling of Single and Multiple Bubbles during Boiling

FM1/ PID-48

Thillaikumar T., Experimental Studies on the Thrust Vector Control of a Supersonic Nozzle using Struts

SM4/ PID-31

S. Satpathy, Three dimensional modal analysis and prediction of fatigue life of a connecting rod

FM7/ PID-81

Sumit Kumar Saha, Effect of guide vane on Dean Vortex for single-phase turbulent flow through 90 degree pipe bend

FM7/ PID-155

Rojalin Pattnaik, Effect of electrification of nanoparticles on the flow and heat transfer over an exponentially stretching surface

FM8/ PID-130

Anjanna Matta, Double diffusive convection in a horizontal porous layer with e ect of variable gravity and internal heat source

FM1/ PID-118

J. Naresh, Aeroelastic flutter analysis of sandwich panel in thermal environment

SM4/ PID-101

Vanita Sharma, Effect of micropolarity on propagation of SH-waves in an elastic layer overlying micropolar substrate

FM7/ PID-92

Vaibhav Rastogi, Numerical Investigation of the Flow Parameters inside a Tunnel when a High Speed Train is passed through it

FM7/ PID-158

Samarendra Panda, Effect of Strouhal number on the flow field of Synthetic Jet

FM8/ PID-169

Rajiva Lochan Mohanty, Prediction of Vapor Bubble Departure Diameter during Pool Boiling using ANFIS

FM1/ PID-10

Dr. Twinkle, Solution of Non-linear Partial Differential Equation Arising in Porous Media in Horizontal Direction By Combination of Elzaki Transform and Adomian Decomposition Method

SM4/ PID-147

Gaurav Mittal, A well posed problem of fractional thermoelasticity with finite wave speed

FM7/ PID-108

Siddhartha Sankar Das, Numerical investigation of effect of inlet temperature on hydrodynamic properties and convective heat transfer

FM7/ PID-166

Rajendra K. Ray, A Numerical Study of Forced Convection from a Circular Cylinder with Time Periodic Pulsating Temperature

FM10/ PID-311

D. Srinivasacharya, Linear Stability of Mixed Convection in a Vertical Channel Filled with Nanofluid Saturated Porous medium

FM1/ PID-22

Ankush Raje, Unsteady MHD flow and heat transfer of immiscible micropolar and Newtonian fluids through a circular pipe filled with porous medium

SM4/PID-188

Md Abul Kashim Molla, Time-Fractional Generalized Thermoelasticity Formulation for Two-Temperature Three-Phase-Lag Model: An Application to Viscoelastic Medium with Spherical Cavity

FM7/ PID-115

Md. Reyaz Arif, Effect of cylinder inclination and heating on mixed convective flows past a square cylinder using non-Boussinesq model

FM11/ PID-249

V.R.K.Reddy, Necessary conditions for spatial inviscid instability in sea straits with arbitrary cross-sections

FM11/ PID-51

Lopamudra Das, Interaction of waves with an immersed sphere in a sea with flexible bottom surface

FM12/ PID-11

Dharmendra Tripathi, Electroosmotic flow of Hybrid Nanofluids in asymmetric microchannel with Low Reynolds number

SM4/ PID-197

V. R. Manthena, Thermoelasticity of a functionally graded rectangular plate with internal heat generation

FM7/ PID-121

Debasish Kumar Aerodynamic behaviour of cross plan shaped tall buildings under wind load – A Numerical Approach

FM13/ PID-255

Ch.Divya, Effect of mathematical model on optimization of process parameters using genetic algorithm in turning process

FM11/ PID-52

Sagarika Khuntia, Wave diffraction by a small base deformation on a flexible bed in an ice-covered fluid

FM12/ PID-87

Tarun Kumar Dey, Study of bulk viscosity and shear viscosity of two component fluids

SM4/ PID-198

N. K. Lamba, Hygrothermoelastic response of a finite hollow circular cylinder

FM7/ PID-127

P. Gokulavani, Natural convection in a ventilation cavity with protruding object

FM13/ PID-274

Uppara Manjula, Real hypersurface of a nearly Kaehler manifold

FM11/ PID-171

Manjari Sidharth, Transient fexural gravity wave motion on a permeable bed in three dimensions

FM12/ PID-88

Anjana Kumari, Theoretical study of surface property of Lennard-Jones fluids

SM4/ PID-199

S. D. Warbhe, Fractional order theory of thermal stresses in a simply supported late with thermal bending moments

FM7/ PID-137

G. Srinivas, Linear Stability Analysis of Electrothermoconvection in a Rotating Plane Layer

FM12/ PID-102

Mukesh Kumar Sinha, Differential Cross- Section of e+ - He+ Scattering

FM11/ PID-221

Satyanarayana Badeti Influence of an axial velocity on a linear Ekman boundary layer

FM12/ PID-99

Gunsagar Yadav, Influence of acoustical character of nano ferro -fluids

SM4/ PID-200

Jyoti Verma, Time fractional hygrothermoelastic problem for a hollo cylinder subjected to constant heat and moisture flux

FM7/ PID-139

Satadru Bhattacharya, Effect of Wind Load on Regular and Irregular Plan Shaped Building

FM12/ PID-109

Brahma Nand Jha, Study of Semiconductor devices simulation using numerical methods

FM11/ PID-236

A.K. Mohapatra Effect of sea bed profiles on the wave interaction of a horizontal submerged plate attached to a vertical wall

FM13/ PID-250

Rahul R., Mathematical Modeling of Drug Dynamics in Arterial Drug-eluting stent

SM4/ PID-201

N. J. Wange, On fractional order temperature distribution in a multilayer composite hollow sphere with internal hear source

FM7/ PID-78

Rajdip Paul, Wind Effects on Cross Plan Shaped Tall Building

FM1/ PID-292

Sushil Kumar Singh, Aerofoil-turbulence noise reductions using non-uniform wavy serrations



11:45 – 12:45 Lecture Name Speaker Chairperson Community Centre Prof. G.I. Taylor Memorial Lecture Prof. Jitesh Gajjar, University of Manchester, UK Prof. T.V.S. Sekhar


Time (hrs.): 14:30 – 16:30

Invited Lectures and Technical Sessions


Session Chair: Prof. S. K. Mahapatra Session Chair: Prof. D.K. Maiti Session Chair: Prof. M.M. Mahapatra Session Chair: Session Chair:


Invited Lecture

Prof. Rudra Pratap, IISc Bangalore Title of the Talk: Residual Stress Modulated Distinctions in the Dynamics of Microresonators

Invited Lecture

Dr. N. K. Sura Scientist F, ADA, Bangalore Title of the Talk: Autopilot for High Performance Aircraft: Design, Development, Evaluation and Testing

Invited Lecture

Dr. Kamal Sharma, BARC, Mumbai Title of the Talk: Application of Ball Indentation Technique for Mechanical Property Estimation of Nuclear Power Plants Material

SM4/ PID-202

G.D. Kedar, Effect of Rosenthal heat source in a thermoelastic plate in time fractional heat conduction context

SM7/ PID-13

Madhumita Mohanty, Dynamic stability analysis of a rotating symmetric sandwich beam subjected to axial pulsating load

SM7/ PID-94

Ajeesh C., Experimental and numerical free vibration analysis of laminated composite shells

FM5/ PID-15

K. Choudhury, Heat and Mass Transfer in Three Dimensional Flow through a Porous Medium with Periodic Permeability

FM4/ PID-35

R. Ponalagusamy, Computational Model on Pulsatile Electro-Magneto Hydrodynamic Blood Flow in a Balloon Catheterized Arterial Stenosis

SM4/ PID-203

V. B. Srinivas, Heat conduction and thermal stresses of a thermosensitive rectangular plate with internal heat generation

SM7/ PID-17

Nipu Modak, Experimental and finite element investigation of carbon fiber reinforced composites

SM7/ PID-116

Tapas Ranjan Panigrahi Love wave dispersion in an earth’s crust lying over a pre-stressed mantle

FM5/ PID-79

P. Ragupathi, Numerical study on the rotating flow of Casson- Carreau fluid

FM4/ PID-43

Abhisek Gupta, Mechanical response of different types of scaffolds for biomedical application

SM4/ PID-204

N. P. Gaikwad, LRS Bianchi Type II Cosmological Model with Bulk Viscous Fluid in Rosen’s Gravity

SM7/ PID-23

Tanushree Dalai, Experimental and Numerical Studies on Free Vibration of Natural Fiber Laminated Composite Plates

SM7/ PID-135

Bablu Kumar Jha, Electro-elasto-static analysis of Laminated Piezoelectric Energy Harvester Composed of Composite Beam Substrates

FM5/ PID-106

S. Talukdar, Transient MHD Casson fluid flow past an inclined surface

FM4/ PID-84

G. Manoj Kumar, Thermal modelling of human cornea and its experimental validation

SM4/ PID-205

P. R. Dhongle, Bianchi Type I String Dust Model with Magnetic Field in Stationary Space-Time

SM7/ PID-34

Swagatika Behera, Experimental and Numerical Studies on Dynamic Behavior of Laminated Composite Plate with Cut-Out

SM7/ PID-143

S K Panda, A Review on Piezoelectric Actuators and Piezocomposite Structures

FM5/ PID-117

Pankaj, Higher Order Compact Simulation of Unsteady Natural Convection In a Square Cavity with Bottom Undulations

FM4/ PID-149

Vaibhavsingh S. Varma, Human muscle activity observations for predefined biped kinematics using musculoskeletal simulator

SM4/ PID-206

M.S. Borkar, LRS Bianchi Type-II Cosmological Model with String Bulk Viscous Fluid and Magnetic Field in Barber’s Second Self Creation Theory

SM7/ PID-40

Kamala Kumar Pradhan, Boundary layer flow of nanofluid over a continuous moving plate with the effect of electrification of particle

SM7/ PID-168

Anil K. Vashishth, Reflection and transmission of olane waves at an interface between Piezo- thermoelastic solid and porous Piezo- thermoelatic solid media

FM5/ PID-156

Motahar Reza, Soret and Dufour effects on entropy generation for 𝐴𝐼𝑁 𝑎𝑛𝑑 𝐴𝑙2𝑂3 Hybrid Nanofluid Flow over past a stretching sheet in porous media

FM4/ PID-184

Md. Hasan, Effect of arterial constitutive models on blood flow characteristics in aortic bifurcation using one dimensional wave

SM4/ PID-207

S. S. Charjan, Viscous fluid string Cosmological model with term in Bimetric theory of gravitation

SM7/ PID-55

Y. Sharath Chandra Mouli, Low-velocity impact behaviour on in-house prepreg made composite laminates

SM7/ PID-196

Sayan Roy, A Study on Flexural Rigidity of Hexagonal Honeycomb Sandwich Structures using Finite Element Analysis

FM5/ PID-213

Chandra Shekara G, Study of Finite amplitude instability of double diffusive time –dependent flows in a fluid layer

FM4/ PID-219

Sriram Mahitha, Behaviour of stem cells and substrates under mechanical stimuli – a finite element approach

SM4/ PID-208

L.C. Bawankar, Generalized magneto- thermoelastic problem with thermosensitive material properties

SM7/ PID-73

A. Pradhan, An ABAQUS plugin to generate RVE with random fibre arrangement and estimation of effective properties

SM7/ PID-227

Ajinkya R. Dusane, Crack growth studies in laminated composites using coupled cohesive zone Crack growth studies in laminated composites using coupled cohesive zone

FM5/ PID-215

Golam Mortuja Sarkar, Stability analysis of non-Newtonian boundary layer flow with partial slip

FM4/ PID-237

Rajnandini Das, Development and Application of metamaterials

SM4/ PID-210

P.V. Gayakwad, Bulk Viscous Bianchi Type I Barotropic Fluid Cosmological Model with Varying Λ and Functional Relation on

SM7/ PID-76

Yathish Muddappa P.P., Vibration and Buckling behavior of Interlaminar Hybrid Fiber Metal Laminate

SM7/ PID-242

Ujwal Shende, An analysis of Surface Wave like Modes in Lamb Wave Propagation for Plates of

FM5/ PID-218

Suman Sarkar, Existence and Uniqueness Result of Nonlinear Boundary Value Problem Arising Due to Hiemenz

FM4/ PID-295

Ankush Pratap Singh, Finite element analysis for evaluation of post implant axial loading condition of femur fracture fixation plate made of

Hubble Parameter in Bimetric Theory of Gravitation

subjected to uniaxial compressive load

Fiber-Reinforced Functionally Graded Material

Flow with Slip Boundary Conditions

shape memory alloy for optimum healing

SM2/ PID-261

Shafee. P. P., A finite element study of flexible pavement : an attempt towards application of ldpe in road construction

SM7/ PID-93

Subham Patra, Effect of fibre orientation on the free vibration characteristics of laminated composite plates

SM8/ PID-288

K. Deepak, Design and development of a Pick and place manipulator as a part of Rubber Ply Handling System for Green Tyre Manufacturing Process

FM4/ PID-303

Dr. Nidhi S Vaishnaw, Stability analysis of mathematical model for depression in young women students

FM1/ PID-302

Jithin P. N., Numerical studies on the height stability of a shape optimized NACA 0012 In- GroundEffect



Time (hrs.): 16:45 – 18:15 Technical Sessions


Session Chair: Session Chair: Session Chair: Session Chair: Session Chair:


SM7/ PID-264

Dona Chatterjee, First Ply Failure Analysis of Laminated Composite Skew Plates Using ANSYS

FM5/ PID-258

Gangamani, H.V., Nanofluid flow Model over a Stretching Sheet using DTM-Pade Approximation

FM7/ PID-239

Pooja Gupta, Solution of Riemann problem for non-ideal magnetogasdynamic flow

FM9/ PID-9

Ramesh Chandra Nayak, Validation by theoretical with experimental results for heat transfer from the internal surface of vertical tubes having with and without internal rings

Reserved

SM7/ PID-271

Abhirami A J, Analysis of Failure Modes in a Unidirectional Bio-inspired Regular Staggered Composite

FM5/ PID-270

Debasish Kumar, Aerodynamic behaviour of two cross plan shaped tall buildings

FM7/ PID-241

Shobhit Kumar Srivastava, On the evolution of finite and small amplitude waves in non –ideal gas with dust particles

FM9/ PID-72

Shantashree Jena, Modelling and analysis of Pneumatic artificial muscle testrig

SM7/ PID-273

B.N.Dhanunjayarao, Prediction of Effective Elastic Properties of h-BN/Epoxy Composite using multi-scale FEM Approach

FM5/ PID-296

Sameena Tarannum, Sinusoidal and non-sinusoidal temperature modulations on three- component convection in a Newtonian fluid

FM7/ PID-243

Paramananda Padhi, Effect of Magnetic Field on the Mixed Convection Nanofluid flow in Lid Driven Cavity

FM13/ PID-161

Kshma Trivedi, Mathematical Modeling of OWC wave energy converter devices over undulated sea bed

SM7/ PID-294

Surya Dev Singh, Static analysis of CNT reinforced polymer composite

FM6/PID-33

Revathi Ravilisetty, Solution of One dimensional Strong Converging Cylindrical and Spherical Shock Waves in Non Ideal Gas

FM7/ PdID-238

Rahul Kumar Chaturvedi, Solution of generalized Riemann problem for hyperbolic p-system with damping

FM13/ PID-212

Harsha S. V. , Pseudo-spectral solution of thermal instability of nanofluid flow through a channel

SM7/ PID-301

Y. B. Sudhir Sastry, Modelling, Structural and Vibrational Analysis using SiC Composite Material Nose Cone dome for Re-entry Vehicles

FM6/PID-211

Sarswati Shah, Propagation of shock wave in a non-ideal reacting gas

FM7/ PID-245

Samit Ghosh, MHD forced convection flow in spherical geometry considering induced magnetic field in the entire domain

FM13/ PID-244

M.N. Srinivas, Stochastic, diffusive and time delay analysis of a stage structure fishery model with feedback controls


18:30 – 19:00 Valedictory Function SMS-304

Day 4: December 12, 2019

Leisure day

TS: Technical Sessions

YSAS: Young Scientist Award Session

SMS: School of Mechanical Sciences

SBS: School of Basic Sciences

Documents

ISTAM 2019 Programme Schedule - Indian Institute of Technology … 2019_Tentative Schedule... · Suman Pal, Axisymmetric free vibration behaviour of BFGM rotating micro-disk based