Upload
others
View
5
Download
0
Embed Size (px)
Citation preview
Assessment Manager: JJ Page 1 of 46
Schedule of Accreditation Issued by
United Kingdom Accreditation Service
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
0010
Accredited to ISO/IEC 17065:2012 to provide product
conformity certification
Intertek Testing & Certification Ltd
Issue No: 113 Issue date: 12 August 2021
Academy Place
1-9 Brook Street
Brentwood
Essex
CM14 5NQ
Contact: Mr Andrew Strachan
Tel: +44 (0)1372 370900
Fax: +44 (0)1372 370999
E-Mail: [email protected]
Website: www.intertek.com
Locations where certification activities covered by the above Accreditation Standard are undertaken [UK]
Intertek Testing & Certification Ltd Intertek House Cleeve Road Leatherhead Surrey KT22 7SA United Kingdom
Intertek Testing & Certification Ltd Centre Court Meridian Business Park Leicester LE19 1WD United Kingdom Statement of ASTA Results: Authorised office for:-
1. Section 12: Switchgear and ControlGear 2. Section 13: Transformers and Reactors
Intertek Testing & Certification Ltd Deeside Lane Chester CH1 6DD United Kingdom
Intertek Testing & Certification Ltd Davy Avenue Knowhill Milton Keynes Bucks MK5 8NL United Kingdom
Locations where certification activities covered by the above Accreditation Standard are undertaken [PRC] Intertek Testing Services (Shanghai) Limited Building No 86 1198 Qinzhou Road North Shanghai PR China 200233
0010
Accredited to ISO/IEC
17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Intertek Testing & Certification Ltd 2
Issue No: 113 Issue date: 12 August 2021
Assessment Manager: JJ Page 2 of 46
Flexible Scope The laboratory is accredited to ISO/IEC17065:2012 to conduct product certification activities in accordance with the standards highlighted in the schedule. This may also include certification on the same or similar product types against standards that are not specifically listed in this Schedule, providing that: (1) The standard does not introduce new principles of measurement. (2) The method or standard does not require measurements to be made outside the parametric boundaries defined in this Schedule. Information about flexible scopes of accreditation is available in UKAS document GEN 4
0010
Accredited to ISO/IEC
17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Intertek Testing & Certification Ltd 2
Issue No: 113 Issue date: 12 August 2021
Assessment Manager: JJ Page 3 of 46
DETAIL OF ACCREDITATION
Section Product Page
1 AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS. 3
2 CABLES AND CORDS 3
3 CABLE TRUNKING, CONDUIT AND FITTINGS 4
4 CIRCUIT BREAKERS 5
5 CONTROLS AND COMPONENTS 6
6 ELECTRICAL WIRING ACCESSORIES 7
7 ELECTRICAL SYSTEMS 12
8 ENCLOSURES 13
9 FUSES 13
10 HOUSEHOLD APPLIANCES AND LUMINAIRES 15
11 RELAYS 15
12 SWITCHGEAR AND CONTROLGEAR 16
13 TRANSFORMERS AND REACTORS 19
14 INFORMATION TECHNOLOGY EQUIPMENT. 21
15 ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE 21
16 ELECTRICAL APPARATUS FOR EXPLOSIVE ATMOSPHERES 22
17 CONSTRUCTION PRODUCTS 26
18 MICROGENERATION 26
19 FIRE & SECURITY PRODUCTS 27
20 ACCREDITATION FOR THE PURPOSE OF NOTIFIED BODY ACTIVITY 30
0010
Accredited to ISO/IEC
17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Intertek Testing & Certification Ltd 2
Issue No: 113 Issue date: 12 August 2021
Assessment Manager: JJ Page 4 of 46
Where the BS EN or IEC standards have exact equivalents in EN Standards, those EN standards are also included in the accreditation.
Product Standard Location
SECTION 1: AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS
Audio, video and similar electronic apparatus. Safety requirements
BS EN 62368-1:2014 IEC 62368-1:2014 (Ed 2) EN 60065:2014+A11:2017 IEC 60065:2014 BS EN 60065:2002 IEC 60065:2001
UK
SECTION 2: CABLES AND CORDS UK
SECTION 3: CABLE TRUNKING, CONDUIT AND FITTINGS
Non-metallic conduits and fittings for electrical installations
Cable trunking Steel surface trunking BS EN 50085-1:2005+A1:2013
BS EN 50085-2-1:2006+A1:2011
UK
Specification for conduit systems for cable management
Conduit systems for cable management. Outside diameters of conduits for electrical installations and threads for conduits and fittings.
BS EN 60423:2007 IEC 60423:2007
Conduit systems for cable management General requirements
BS EN 61386-1:2008+A1:2019 IEC 61386-1:2008+A1:2017 BS EN 61386-1:2008 IEC 61386-1:2008
UK
Rigid conduit systems BS EN 61386-21+A11:2010 BS EN 61386-21:2004 IEC 61386-21:2002
0010
Accredited to ISO/IEC
17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Intertek Testing & Certification Ltd 2
Issue No: 113 Issue date: 12 August 2021
Assessment Manager: JJ Page 5 of 46
Product Standard Location
SECTION 3: CABLE TRUNKING, CONDUIT AND FITTINGS (cont’d)
Pliable conduit systems BS EN 6136-22+A1:2010
BS EN 61386-22:2004 IEC 61386-22:2002
UK
Flexible conduit systems BS EN 61386-23:2004
IEC 61386-23:2002
Conduit systems buried underground BS EN 61386-24:2010
IEC 61386-24:2004
SECTION 4: CIRCUIT BREAKERS
General requirements for circuit breakers for voltages above 1 000 V
IEC 62271-100:2008+AMD1:2012(ED 2.1)+AMD2:2017 (Ed 2.2) BS EN 62271-100:2009
UK
Circuit breakers for overcurrent protection for household and similar installations
Circuit-breakers for a.c. operation BS EN 60898-1:2003
IEC 60898-1:2015 UK
Circuit-breakers for a.c. and d.c. operation BS EN 60898-2:2006
IEC 60898-2:2000
Residual current operated circuit-breakers without integral overcurrent protection for household and similar used (RCCBs)
BS EN 61008-1:2004 IEC 61008-1:2010
UK
Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBO's)
BS EN 61009-1:2012 IEC 61009:2010
UK
0010
Accredited to ISO/IEC
17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Intertek Testing & Certification Ltd 2
Issue No: 113 Issue date: 12 August 2021
Assessment Manager: JJ Page 6 of 46
Product Standard Location
SECTION 5: CONTROLS AND COMPONENTS
Thermal-links. Requirements and application guide BS EN 60691:2016
IEC 60691:2015 UK
Automatic controls for household and similar use BS EN 60730:2016+A1:2019
IEC 60730-1:2013+A1:2015 BS EN 60730-1:2011 BS EN 60730-1:2001 IEC 60730-1:2010 (fourth edition) IEC 60730-1:1999 BS EN 60730-1:1995 IEC 60730-1:1993 BS EN 60730-1:1992 IEC 60730-1:1986 and the –2-XX series of standard
UK
Switches for appliances Switches for appliances. General requirements. BS EN 61058-1:2002+A2:2008
IEC 61058-1:2002 UK
Cord switches BS EN 61058-2-1:2011
IEC 61009:2010 UK
Independently mounted switches BS EN 61058-2-4:2005
IEC 61058-2-4:2003 UK
Change-over selectors BS EN 61058-2-5:1995
IEC 61058-2-5:1994 UK
Lamp controlgear BS EN 61347-1:2008
IEC 61347-1:2007 BS EN 61347-1:2001 IEC 61347-1:2000 and the -2-XX series of standard
UK
0010
Accredited to ISO/IEC
17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Intertek Testing & Certification Ltd 2
Issue No: 113 Issue date: 12 August 2021
Assessment Manager: JJ Page 7 of 46
Product Standard Location
SECTION 5: CONTROLS AND COMPONENTS (cont’d)
Electrical Safety Related Electronic Controls Automatic Gas Burner Control Systems
EN 298:2012 EN 13611:2007+A2:2011
UK
SECTION 6: ELECTRICAL WIRING ACCESSORIES
Ceiling roses BS 67:1987 UK
Two-pole and earthing-pin plugs, socket-outlets and socket-outlet adapters
BS 546:1950 plus Amendments 1-8 & Supplements No. 1 & 2 SS 472:1999
UK
13A rewireable and non-rewireable plugs BS 1363-1:2016+A1:2018
BS 1363-1:1995+A4:2012 incorporating Corrig No. 1 (Withdrawn) IS 401: 1997 MS 589 Part 1:1987 SS 145 Part 1:1997 SASO 2203:2015 SASO 443:1997
UK
13A switched and unswitched socket-outlets BS 1363-2:2016+A1:2018
BS 1363-2:1995+A4:2012 (withdrawn) MS 589-2:2011 SS 145 Part 2:1997 SS 145-2:2018 SASO 2203:2015 SASO 443:1997
UK
13A adapters BS 1363-3:2016+A1:2018
BS 1363-3:1995+A4:2012 (Withdrawn) SS246: 1996 MS 589 Part 3:1987 MS 589-3:2018
UK
13A fused connection units switched and unswitched
BS 1363-4:2016+A1:2018 BS 1363-4:1995 +A4:2012 (Withdrawn) MS 589 Part 4:1987 SS 403:2013
UK
0010
Accredited to ISO/IEC
17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Intertek Testing & Certification Ltd 2
Issue No: 113 Issue date: 12 August 2021
Assessment Manager: JJ Page 8 of 46
Product Standard Location
SECTION 6: ELECTRICAL WIRING ACCESSORIES (cont’d)
Fused conversion plugs BS 1363-5:2016
BS 1363-5:2008 UK
Plugs and socket-outlets for household and similar purposes
IEC 60884-1:2002+A1:2006+A2:2013 IEC 60884-1 Edition 3.2, 2013-02 (limitation:
• BS 1363 style products
• BS 546:1950 style products)
UK
Plugs and socket-outlets for household and similar purposes – fused plugs
IEC 60884-2-1 2nd Edition, 2006-10 (limitation: BS 1363 style products)
UK
Plugs and socket-outlets for household and similar purposes – switched socket-outlets without interlock for fixed installations
IEC 60884-2-3 2nd Edition, 2006-10 (limitation: BS 1363 style products)
UK
Travel adaptors compatible with UK plug and socket system
BS 8546:2016 UK
Cooker control units BS 4177:1992 UK
2-pin plugs and shaver socket-outlets BS 4573:1970+A5:2016
BS 4573:1970 UK
Boxes for the enclosure of electrical accessories BS 4662:2006 + A1:2009
IEC 60670-1:2015 BS EN 60670-1:2005 + A1:2013 IEC 60670-1:2002, AMD 1
UK
Electrical accessories not covered by other British Standards
BS 5733: 2010 + A1:2014 UK
Luminaire supporting couplers (LSC’s) BS 6972:1988 UK
Portable residual current devices BS 7071:1992
UK
0010
Accredited to ISO/IEC
17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Intertek Testing & Certification Ltd 2
Issue No: 113 Issue date: 12 August 2021
Assessment Manager: JJ Page 9 of 46
Product Standard Location
SECTION 6: ELECTRICAL WIRING ACCESSORIES (cont’d)
Socket outlets incorporating residual current devices
BS 7288:1990 UK
Bayonet lampholders with enhanced safety BS 7895:1997 UK
Flat non-rewirable two-pole plugs 2.5 A 250 V, with cord, for the connection of class II-equipment for household and similar purposes
BS EN 50075:1991
UK
Plugs, socket-outlets and couplers for industrial purposes
BS EN 60309-1:1999 BS EN 60309-2:1999 + A2:2012 IEC 60309-1:1999 IEC 60309-2:1999
UK
Appliance Connectors for household and similar general purposes
General requirements BS EN 60320-1:2001 (Withdrawn)
IEC 60320-1:2001 (Withdrawn) BS EN 60320-1:2015 IEC 60320-1 Edition 3.0 2015
UK
0010
Accredited to ISO/IEC
17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Intertek Testing & Certification Ltd 2
Issue No: 113 Issue date: 12 August 2021
Assessment Manager: JJ Page 10 of 46
Product Standard Location
SECTION 6: ELECTRICAL WIRING ACCESSORIES (cont’d)
Sewing machine couplers BS EN 60320-2-1:2001
IEC 60320-2-1:2000 UK
Interconnection couplers for household and similar equipment
BS EN 60320-2-2:1999 IEC 60320-2-2:1998
UK
Appliance coupler with a degree of protection higher than IPX0
BS EN 60320-2-3:1999 IEC 60320-2-3:1998
UK
Appliance couplers for household and similar general purposes. Couplers dependent on appliance weight for engagement.
BS EN 60320-2-4:2006 IEC 60320-2-4:2005
UK
Appliance couplers for household and similar general purposes - Part 3: Standard sheets and gauges
BS EN 60320-3:2014 IEC 60320-3:2014 + A1:2018
UK
Switches for household and similar fixed electrical installations
BS EN 60669-1:1999 BS EN 60669-1:2018 IEC 60669-1:1998 IEC 60669-1:2017
UK
Electronic switches BS EN 60669-2-1:2004+A12:2010
BS EN 60669-2-1:2004 IEC 60669-2-1:2002:AMD2:2015
UK
Electromagnetic remote-control switches (RCS) BS EN 60669-2-2:2006
IEC 60669-2-2:2006 UK
Time delay switches BS EN 60669-2-3:2006
IEC 60669-2-3:2006 UK
Isolating switches BS EN 60669-2-4:2005 UK
0010
Accredited to ISO/IEC
17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Intertek Testing & Certification Ltd 2
Issue No: 113 Issue date: 12 August 2021
Assessment Manager: JJ Page 11 of 46
Product Standard Location
SECTION 6: ELECTRICAL WIRING ACCESSORIES (cont’d)
Cord-sets BS EN 60799:1998
IEC 60799:1998
UK
Bayonet Lampholders BS EN 61184:2008 (Withdrawn)
BS EN 61184:2017 IEC 61184:2008
UK
SECTION 6: ELECTRICAL WIRING ACCESSORIES (cont’d)
Cable Reels BS EN 61242:1997+A13:2017
IEC 61242:1995+A2:2015
UK
Connectors BS EN 61984:2009
IEC 61984:2001 (Withdrawn) IEC 61984:2008
UK
Sound signalling devices for household and similar purposes
IEC 62080:2008 UK
Electrical Wiring Accessories ASTA Standards
ASTA Standard 146 ASTA Standard 154 ASTA Standard 158
UK
0010
Accredited to ISO/IEC
17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Intertek Testing & Certification Ltd 2
Issue No: 113 Issue date: 12 August 2021
Assessment Manager: JJ Page 12 of 46
Product Standard Location
SECTION 7: ELECTRICAL SYSTEMS Electrical systems in office furniture and office screens
BS 6396:2008 UK
Powertrack systems Powertrack systems. General requirements. BS EN 61534-1:2011+A1:2014
IEC 61534-1:2011+A1:2014 BS EN 61534-1:2003 BS EN 61534-1:2011IEC 61534-1:2003 IEC 61534-1:2011
UK
Powertrack systems intended for wall and ceiling mounting
BS EN 61534-21:2014 IEC 61534-21:2014 BS EN 61534-21:2006 IEC 61534-21:2006
UK
Powertrack systems. Particular requirements for powertrack systems intended for on floor or under floor installation
BS EN 61534-22:2014 IEC 61534-22:2014 BS EN 61534-22:2009 IEC 61534-22:2009
UK
SECTION 8: ENCLOSURES Degrees of protection provided by enclosures (IP code)
BS EN 60529:1992 IEC 60529:1989
UK
SECTION 9: FUSES Cartridge fuse-links (rated up to 5 amperes) for a.c. and d.c. service
BS 646:1958 + A2:2013 UK
Cartridge fuses for a.c. circuits in domestic and similar premises
BS 1361:1971 UK
General purpose fuse links for domestic and similar purposes (primarily for use in plugs)
BS 1362:1973 AMD1 and 2 SS 167: 1977
UK
0010
Accredited to ISO/IEC
17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Intertek Testing & Certification Ltd 2
Issue No: 113 Issue date: 12 August 2021
Assessment Manager: JJ Page 13 of 46
Product Standard Location
SECTION 9: FUSES (cont’d)
High-voltage fuses Current-limiting fuses BS EN 60282-1:2009
IEC 60282-1:2009 UK
Low-voltage fuses General requirements BS EN 60269-1:2007
BS EN 60269-1: 2007+A2: 2014
BS 88-1:2007 IEC 60269-1:2006
UK
Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application). Examples of standardized systems of fuses A to I.
IEC 60269-2:2016 IEC 60269-2-1:2016 IEC 60269-3:2020+A2:2019 BS 88-2:2007 IEC 60269-3:2010 BS HD 60269-2: 2010, BS 88-2:2010
UK
Examples of standardized systems of fuses A to F BS 88-3:2007 (Withdrawn)
IEC 60-269-3:2006 (Withdrawn) BS HD 60269-3: 2010, BS 88-3: 2010 BS HD 60269- 3:2010+A1:2013
UK
Supplementary requirements for fuse-links for the protection of semiconductor devices
BS EN 60269-4:2007 BS 88-4:2007 IEC 60269-4:2006 BS EN 60269-4: 2009, IEC 60269-4: 2009 IEC BS HD 60269-2: 2013, BS 88-2: 2013
UK
0010
Accredited to ISO/IEC
17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Intertek Testing & Certification Ltd 2
Issue No: 113 Issue date: 12 August 2021
Assessment Manager: JJ Page 14 of 46
Product Standard Location
SECTION 10: HOUSEHOLD APPLIANCES AND LUMINAIRES
Household and Similar Electrical Appliances BS EN 60335-1:2012+A13:2017
BS EN 60335-1:2012+A11:2014 BS EN 60335-1:2002 (Withdrawn) IEC 60335-1:2002 (Withdrawn) BS EN 60335-1:1995 (Withdrawn) IEC 60335-1:1991 (Withdrawn) and the -2-XX series of standard
UK
Luminaires BS EN 60598-1:2008 (Withdrawn)
IEC 60598-1:2008 (Withdrawn) and the –2-XX series of standard
UK
SECTION 11: RELAYS Electrical relays Single input energizing quantity measuring relays with dependent or independent time
BS EN 60255-3:1998 IEC 60255-3:1989
UK
Insulation coordination for measuring relays and protection equipment. Requirements and tests.
BS EN 60255-5:2001 IEC 60255-5:2000
UK
Measuring relays and protection equipment BS EN 60255-6:1995
IEC 60255-6:1986 UK
Thermal electrical relays BS EN 60255-8:1998
IEC 60255-8:1990 UK
0010
Accredited to ISO/IEC
17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Intertek Testing & Certification Ltd 2
Issue No: 113 Issue date: 12 August 2021
Assessment Manager: JJ Page 15 of 46
Product Standard Location
SECTION 12: SWITCHGEAR and CONTROLGEAR
Surge arresters
Non-linear resistor type gapped surge arrestors for a.c. systems
BS EN 60099-1:1994 IEC 60099-1:1991 IEC 60099-1:1991 + A1:1999
UK, PRC UK, PRC UK, PRC
Metal-oxide surge arresters without gaps for a.c. systems
BS EN 60099-4:2014 IEC 60099-4:2014
UK, PRC UK, PRC
Specification for high-voltage switches
On load tap changers
Low-voltage switchgear and control gear assemblies
Type-tested and partially type-tested assemblies IEC 61439-1: 2011 IEC 61439-1: 2020 BS EN 61439-1:2011
UK, PRC PRC UK, PRC
Power switchgear and controlgear assemblies AS/NZS 61439-2:2016
UK
IEC 61439-2: 2011 IEC 61439-2: 2020 BS EN 61439-2: 2011
UK, PRC PRC UK, PRC
Busbar trunking systems (busways) IEC 61439-6: 2012 BS EN 61439-6: 2012
UK, PRC UK, PRC
Low-voltage switchgear and controlgear assemblies intended to be installed in places where unskilled persons have access to their use. Distribution boards.
IEC 61439-3: 2012 BE EN 61439-3: 2012
UK, PRC UK, PRC
Assemblies for construction sites (ACS)
Assemblies for power distribution in public networks IEC 61439-5: 2010 IEC 61439-5:2014BS EN 61439-5: 2011 BS EN 60439-5:2015
UK, PRC PRC UK, PRC PRC
0010
Accredited to ISO/IEC
17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Intertek Testing & Certification Ltd 2
Issue No: 113 Issue date: 12 August 2021
Assessment Manager: JJ Page 16 of 46
Product Standard Location
SECTION 12: SWITCHGEAR and CONTROLGEAR (cont’d)
Low voltage assemblies – internal arc testing IEC/TR 61641:2008
IEC 61641:2014 UK, PRC PRC
Empty enclosures for low-voltage switchgear and controlgear assemblies – General requirements
IEC BS EN 62208:2011 UK, PRC
High voltage switchgear and controlgear BS EN 62271-1:2008 (Withdrawn)
IEC 62271-1:2007 (Withdrawn) IEC 62271-1:2017
UK, PRC UK, PRC UK, PRC
Synthetic testing BS EN 62271-101:2013
BS EN 62271-101: 2013+A1:2018 IEC 62271-101:2012 IEC 62271-101:2012+A1:2017
UK, PRC PRC UK, PRC PRC
Alternating current disconnectors and earthing switches
BS EN 62271-102:2002 (Withdrawn) BS EN 62271-102: 2002+A2:2013 IEC 62271-102:2013 (Withdrawn) IEC 62271-102:2018
UK, PRC PRC UK, PRC UK, PRC
Switches for rated voltages above 1 kV and less than 52 kV
IEC 62271-103 Ed.1:2011 BS EN 62271-103:2011
UK, PRC UK, PRC
High-voltage switches for rated voltages of 52 kV and above
BS EN 62271-104:2009 (Withdrawn) IEC 62271-104:2009 (Withdrawn) IEC 62271-104:2015 IEC 62271-104:2020
UK, PRC UK, PRC PRC PRC
AC switch-fuse combinations BS EN 62271-105:2012
IEC 62271-105:2002 (Withdrawn) IEC 62271-105:2012
UK, PRC UK UK, PRC
Power Capacitors – LV power factor correction banks
IEC 61921: 2003 IEC 61921:2017BS EN 61921: 2003
UK, PRCPRC UK, PRC
AC metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV
BS EN 62271-200:2012 IEC 62271-200:2011
UK, PRC UK, PRC
High-voltage/ low-voltage prefabricated substation BS EN 62271-202:2007
IEC 62271-202:2006 IEC 62271-202:2014
UK, PRC UK, PRC UK, PRC
0010
Accredited to ISO/IEC
17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Intertek Testing & Certification Ltd 2
Issue No: 113 Issue date: 12 August 2021
Assessment Manager: JJ Page 17 of 46
Product Standard Location
SECTION 12: SWITCHGEAR and CONTROLGEAR (cont’d)
Gas-insulated metal-enclosed switchgear for rated voltages of 72.5 kV and above
IEC 62271 203 Ed. 2: 2011 BS EN 62271-203:2004
UK, PRC UK, PRC
Compact switchgear assemblies for rated voltages above 52 kV
IEC BS EN 62271-205:2008 UK, PRC
Specification for low-voltage switchgear and controlgear
General rules BS EN 60947-1:2007
BS EN 60947-1:2007+A2:2014 IEC 60947-1:2007 + AMD1:2010 + AMD2:2014 IEC 60947-1:2020
UK, PRC PRC UK, PRC PRC
Circuit-breakers BS EN 60947-2:2017
BS EN 60947-2:2017+A1:2020 IEC 60947-2:2016 IEC 60947-2:2016+A1:2019 BS EN 60947-2:2006 IEC 60947-2:2006
UK, PRC PRC UK, PRC UK, PRC UK, PRC
Switches, disconnectors, switch-disconnectors and fuse-combination units
BS EN 60947-3:2009 BS EN 60947-3:2009+A2:2015 IEC 60947-3:2008 IEC 60947-3:2008+A1:2012+A2:2015 IEC 60947-3:2020
UK, PRC PRC UK, PRC PRC PRC
Contactors and motor-starters. Electromechanical contactors and motor-starters.
BS EN 60947-4-1:2010 (Withdrawn) IEC 60947-4-1:2009 (Withdrawn)
UK UK
AC semiconductor motor controllers and starters BS EN 60947-4-2:2012
IEC 60947-4-2:2011 UK UK
AC semiconductor controllers and contactors for non-motor loads
BS EN 60947-4-3:2000 IEC 60947-4-3:1999
UK UK
0010
Accredited to ISO/IEC
17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Intertek Testing & Certification Ltd 2
Issue No: 113 Issue date: 12 August 2021
Assessment Manager: JJ Page 18 of 46
Product Standard Location
SECTION 13: TRANSFORMERS AND REACTORS
Power transformers General BS EN 60076-1:2011
IEC 60076-1:2011 UK, PRC
Power transformers. Temperature rise. BS EN 60076-2:2011
IEC 60076-2:2011 UK, PRC
Insulation levels, dielectric tests and external clearances in air
BS EN 60076-3:2013+A1:2018 IEC 60076-3:2013+A1:2018 BS EN 60076-3:2013 IEC 60076-3:2013
UK, PRC
Guide to the lightning impulse and switching impulse testing. Power transformers and reactors.
BS EN 60076-4:2002 IEC 60076-4:2002
UK, PRC
Ability to withstand short-circuit BS EN 60076-5:2006
IEC 60076-5:2006 UK, PRC
Determination of sound levels BS EN 60076-10:2016
BS EN 60076-10:2001 IEC 60076-10:2016 IEC 60076-10:2001
UK, PRC
Dry-type transformers BS EN 60076-11:2004
IEC 60076-11:2004 BS EN 60076-11:2018 IEC 60076-11:2018
UK, PRC
Self-protected liquid-filled transformers BS EN 60076-13:2006
IEC 60076-13:2006 UK, PRC
Reactors BS EN 60076-6:2008 UK, PRC IEC 60076-6:2007 UK, PRC
0010
Accredited to ISO/IEC
17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Intertek Testing & Certification Ltd 2
Issue No: 113 Issue date: 12 August 2021
Assessment Manager: JJ Page 19 of 46
Product Standard Location
SECTION 13: TRANSFORMERS AND REACTORS (cont’d)
Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1kV
General. Performance, testing and rating. Safety requirements. Guide for installation and operation.
BS EN 60831-1:2014 IEC 60831-1:2014 BS EN 60831-1:1998 IEC 60831-1:1996
UK UK UK UK
Ageing test, self-healing test and destruction test BS EN 60831-2:1996
IEC 60831-2:1995 UK UK
Convertor transformers. Transformers for industrial applications
UK
Safety of power transformers, power supply units and similar products
BS EN IEC 61558-1:2019 BS EN 61558-1:2005 IEC 61558-1:2005 BS EN 61558-1:1998 IEC 61558-1:1997 and the -2-XX series of standard
IEC 61558-2-5:2010 BS EN 61558-2-5:2010
Instrument Transformers Instrument Transformers – General Requirements BS EN 61869-1:2009
IEC 61869-1:2007 UK, PRC
Instrument Transformers – Current transformers BS EN 61869-2:2012
IEC 61869-2:2012 UK, PRC
Instrument Transformers – Inductive voltage transformers
BS EN 61869-3:2011 IEC 61869-3:2011
UK, PRC
Instrument Transformers – Combined transformers IEC 61869-4:2013 UK, PRC Instrument Transformers – Single-phase capacitor voltage transformers
IEC 61869-5:2011 UK, PRC
0010
Accredited to ISO/IEC
17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Intertek Testing & Certification Ltd 2
Issue No: 113 Issue date: 12 August 2021
Assessment Manager: JJ Page 20 of 46
Product Standard Location
SECTION 14: INFORMATION TECHNOLOGY EQUIPMENT
Information technology equipment. Safety. General requirements.
BS EN 60950-1:2006 IEC 60950-1:2005 BS EN 60950-1:2002 IEC 60950-1:2001
UK
Information technology equipment. Safety. Remote power feeding.
BS EN 60950-21:2003 IEC 60950-21:2002
Information technology equipment. Safety. Equipment installed outdoors.
BS EN 60950-22:2006 IEC 60950-22:2005
Information technology equipment. Safety. Large data storage equipment.
BS EN 60950-23:2006 IEC 60950-23:2005
SECTION 15: ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE
Electrical equipment for measurement, control and laboratory use
BS EN 61010-1:2001 IEC 61010-1:2001
UK
Laboratory equipment for the heating of materials BS EN 61010-2-010:2003
IEC 61010-2-010:2003
Hand held probe assemblies for electrical measurement and test
BS EN 61010-031:2002 IEC 61010-031:2002
Hand held current clamps for electrical measurement and test
BS EN 61010-2-032:2002 IEC 61010-2-032:2002
Automatic and semi-automatic laboratory equipment for analysis and other purposes
IEC 61010-2-081: 2002 BS EN 61010-2-081: 2002
In-vitro diagnostic (IVD) medical equipment IEC 61010-2-101: 2002
BS EN 61010-2-101: 2002
0010
Accredited to ISO/IEC
17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Intertek Testing & Certification Ltd 2
Issue No: 113 Issue date: 12 August 2021
Assessment Manager: JJ Page 21 of 46
Product Standard Location
SECTION 16: ELECTRICAL APPARATUS FOR EXPLOSIVE ATMOSPHERES
Electrical apparatus for explosive gas atmospheres: General requirements
IEC 60079-0:2017 IEC 60079-0:2011 IEC 60079-0:2007
UK
Oil immersion ‘o’ IEC 60079-6: 2015 IEC 60079-6:2007
UK
Pressurised apparatus ‘p’ IEC 60079-2: 2014 IEC 60079-2:2007
UK
Pressurized room "p" and artificially ventilated room "v"
IEC 60079-13: 2010 UK
Powder filling ‘q’ IEC 60079-5: 2015
IEC 60079-5:2007 UK
Flameproof enclosures ‘d’ IEC 60079-1:2014
IEC 60079-1:2007 UK
Increased safety ‘e’ IEC 60079-7: 2015 (Edition 5)
IEC 60079-7:2006 (Edition 4) UK
Intrinsic safety ‘i’ IEC 60079-11: 2011
IEC 60079-11:2006 UK
Encapsulation ‘m’ IEC 60079-18: 2017 (Edition 4.1)
IEC 60079-18: 2015 (Edition 4) IEC 60079-18:2004 (Edition 3)
UK
Type of protection ‘n’ IEC 60079-15:2017
IEC 60079-15:2010 IEC 60079-15:2005
UK
Intrinsically safe electrical systems IEC 60079-25:2020
IEC 60079-25:2010 IEC 60079-25:2003
UK
0010
Accredited to ISO/IEC
17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Intertek Testing & Certification Ltd 2
Issue No: 113 Issue date: 12 August 2021
Assessment Manager: JJ Page 22 of 46
Product Standard Location
SECTION 16: ELECTRICAL APPARATUS FOR EXPLOSIVE ATMOSPHERES (cont’d)
Equipment Group II Category IG/Zone 0 IEC 60079-26: 2014
IEC 60079-26:2006 UK
Equipment and transmission systems using optical radiation
IEC 60079-28:2015 IEC 60079-28:2006
UK
Equipment protection by special protection “s”
IEC 60079-33:2012
UK
Electrical Apparatus for use in dust atmospheres -Protection by enclosure “t”
IEC 60079-31: 2014 IEC 60079-31: 2008
UK
Electrical resistance trace heating – General and testing requirements
IEC 60079-30-1: 2015 UK
Surface heating devices IEC 62086-1:2001 UK
Caplights for use in mines susceptible to firedamp - General requirements
IEC 60079-35-1:2011 UK
Caplights for use in mines susceptible to firedamp - Performance and other safety-related matters
IEC 60079-35-2:2011 UK
Equipment assemblies
IEC TS 60079-46:2017
UK
Non electrical equipment - General requirements EN 13463-1:2009 UK
Non electrical equipment - Flow restriction ‘fr’ EN 13463-2:2004 UK
Non electrical equipment - Flameproof enclosure ‘d’ EN 13463-3:2005 UK
Non electrical equipment - Constructural safety ‘c’ EN 13463-5:2011 UK
0010
Accredited to ISO/IEC
17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Intertek Testing & Certification Ltd 2
Issue No: 113 Issue date: 12 August 2021
Assessment Manager: JJ Page 23 of 46
Product Standard Location
SECTION 16: ELECTRICAL APPARATUS FOR EXPLOSIVE ATMOSPHERES (cont’d)
Non electrical equipment - Control of ignition source ‘b’
EN 13463-6:2005 UK
Explosion prevention basic concepts and methodology
EN 1127-1:1998 UK
Non-electrical equipment for explosive atmospheres - Basic method and requirements
ISO 80079-36:2016
UK
Non-electrical type of protection constructional safety ''c'', control of ignition sources ''b'', liquid immersion ''k''
ISO 80079-37:2016 UK
Metering pumps and fuel dispensers EN 13617-1:2012 EN 13617-1:2004
UK
Petrol filling stations. Safety requirements for construction and performance of safe breaks for use on metering pumps and dispensers
EN 13617-2:2004 EN 13617-2:2012
UK
Petrol filling stations. Construction and performance of automatic nozzles for use on fuel dispensers
EN 13012:2001 EN 13012:2012
UK
Design of fans working in potentially explosive atmospheres
EN 14986: 2017 EN 14986: 2007
UK
Electric surface heating devices BS 6351:Part 1:1983 UK
Metallic cabling glands Construction and Performance of Cable Glands for Electrical Installation
BS 6121:Part 1:2005 EN 62444:2013
UK
Group I, Category M1 equipment intended to remain functional in atmospheres endangered by firedamp and/or coal dust
BS EN 50303:2000 UK
Reciprocating Internal Combustion Engines for use in potentially explosive atmospheres
0010
Accredited to ISO/IEC
17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Intertek Testing & Certification Ltd 2
Issue No: 113 Issue date: 12 August 2021
Assessment Manager: JJ Page 24 of 46
Product Standard Location
SECTION 16: ELECTRICAL APPARATUS FOR EXPLOSIVE ATMOSPHERES (cont’d)
Group II engines for flammable gas and vapour atmospheres
BS EN 1834-1:2000 UK
Group I engines for workings susceptible to firedamp and/or combustible dust
BS EN 1834-2:2000 UK
Group II engines for flammable dust atmospheres BS EN 1834-3:2000 UK
Small Craft; Electrical Devices: Protection against ignition of surrounding flammable gases
BS EN 28846:1993 UK
Flame arrestors ISO 16852:2016
ISO 16852:2010 UK
LPG equipment and accessories – Construction and performance of LPG equipment for automotive filling stations – Dispensers
EN 14678-1:2013 UK
Explosion Venting Devices EN 14797:2006 UK
Where the BS EN, ISO or IEC standards have exact equivalents in EN Standards, those EN
standards are also included in the accreditation
0010
Accredited to ISO/IEC
17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Intertek Testing & Certification Ltd 2
Issue No: 113 Issue date: 12 August 2021
Assessment Manager: JJ Page 25 of 46
Product Standard Location
SECTION 17: CONSTRUCTION PRODUCTS Manufacture of Fire Doors & Door Hardware including Metal, Composite, Timber leaves and doorsets. Hardware to include Hinges, Locks & Latches, door closers and hold open devices
EN 1634-1:2008 EN 1634-2:2008 ISO 3008:2006 EN 1935:2002 EN 12209:2003 EN 1154:1996 EN 1155:1997 Intertek Document 09-01
UK
Manufacture of Passive Fire Products
BS 476-21:1987 BS 476-22:1987 ENV 13381-4:2002 ENV 13381-8:2008 EN 13501-2:2007 Intertek Document 09-02
UK
Installation of passive Fire Products Intertek Document 09-03 UK
Where the BS EN or IEC standards have exact equivalents in EN Standards, those EN standards are also included in the accreditation.
SECTION 18: MICROGENERATION MCS Product Certification MCS scheme Requirements UK Solar Collectors MCS 004 - Solar Collectors Solar Photovoltaic Panels MCS 005 - Solar Photovoltaic Panels Micro & Small Wind Turbines MCS 006 - Micro & Small Wind Turbines Heat Pumps MCS 007 - Heat Pumps MCS 010 - Generic FPC Requirements MCS 011 - Testing and Acceptance Criteria
0010
Accredited to ISO/IEC
17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Intertek Testing & Certification Ltd 2
Issue No: 113 Issue date: 12 August 2021
Assessment Manager: JJ Page 26 of 46
Product Standard Location
SECTION 19: FIRE & SECURITY PRODUCTS EA CertAlarm Sector scheme (Type 5
schemes) TickMark Scheme (Type 5 schemes
UK
Fire Control and Indicating Equipment Sounders Power Supply Equipment Heat detectors Smoke detectors Flame detectors Manual Call points Beam smoke Compatability Voice Alarm Control and Indicating Equipment Short circuit protection devices Input / output devices Aspirating smoke detectors Transmissions equipment Beacons Loudspeakers Radio devices Duct smoke alarms Domestic smoke alarms Carbon Monoxide Point Detectors Multi sensor smoke/heat Multi sensor smoke/CO Multi-sensor smoke, carbon monoxide and optionally heat sensors Carbon Monoxide detectors
Fire EN 54-2:1997 +A1 EN 54-3:2001 +A1,A2 EN 54-4:1998 +A1,A2 EN 54-5:2001 +A1 EN 54-7:2001 +A1,A2 EN 54-10:2002 +A1 EN 54-11:2001 + A1 EN 54-12:2002 EN 54-13:2005 EN 54-16:2008 EN 54-17:2005 EN 54-18:2005 EN 54-20: 2006 EN 54-21:2006 EN 54-23:2010 EN 54-24: 2008 EN 54-25:2008 EN 54-27:2008 EN 14604:2005 EN 54-26:2015 EN 54-29:2015 EN 54-30:2015 EN 54-31:2014+A1 2016 EN 50291-1:2018
0010
Accredited to ISO/IEC
17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Intertek Testing & Certification Ltd 2
Issue No: 113 Issue date: 12 August 2021
Assessment Manager: JJ Page 27 of 46
Product Standard Location
SECTION 19: FIRE & SECURITY PRODUCTS (cont’d)
EA CertAlarm Sector scheme (Type 5 schemes) TickMark Scheme (Type 5 schemes)
UK
Security EMC standard for Fire, Intruder and Social Alarms EMC standard for Fire, Intruder and Social Alarms Environmental tests System Requirements Control and Indicating Equipment Warning devices (sounders) Power Supplies Passive Infrared Detectors Microwave detectors Combined passive and microwave detectors Combined passive and ultrasonic detectors Opening contacts (magnets) Radio equipment use for interconnection Alarm Verification Supervised Premises Transceiver General requirements System requirements General requirements General requirements for alarm transmission equipment Requirements for alarms using dedicated paths Requirements using Public Switched Telephone Networks Requirements with voice communicators using PSTN Requirement for packet switched network PSN Requirements for Supervised Premises Transmission General requirements Requirements for alarms using dedicated paths Requirements using Public Switched Telephone Networks Requirements with voice communicators using PSTN Social Alarms system requirements Social alarms trigger devices Social alarms local unit and controller Social alarms – interconnection and communication
Security EN 50130-4:2005+A1,A2 EN 50130-4:2011 EN 50130-5:1999 EN 50131-1:2006+A2 :2017 EN 50131-3:2009 EN 50131-4: 2019 EN 50131-6: 2017 EN 50131-2-2:2017 EN 50131-2-3:2008 EN 50131-2-4:2008 EN 50131-2-5:2008 EN 50131-2-6:2008 EN 50131-5-3:2017 prEN 50131-9: April 2011 prEN 50131-10: April 2011 EN 50133-1:1997 EN 50133-2-1:2000 EN 50136-1:2012+A1:2018 EN 50136-1-1: 1998+A1,A2 EN 50136-1-2:1998 EN 50136-1-3:1998 EN 50136-1-4:1998 EN 50136-1-5:2008 EN 50136-2:2013 EN 50136-2-1:1998 EN 50136-2-2:1998 EN 50136-2-3:1998 EN 50136-2-4:1998 EN 50134-1:2002 EN 50134-2:2000 EN 50134-3:2001 EN 50134-5:2004
Rules for alarm transmission system – Burglar Alarms SSF 114 issue 2:2009
See next page for Section 20: ACCREDITATION FOR THE PURPOSE OF NOTIFIED BODY ACTIVITY
0010
Accredited to ISO/IEC
17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Intertek Testing & Certification Ltd 2
Issue No: 113 Issue date: 12 August 2021
Assessment Manager: JJ Page 28 of 46
SECTION 20: ACCREDITATION FOR THE PURPOSE OF NOTIFIED BODY ACTIVITY
Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5
Directive / Regulation
Conformity Assessment procedure/
Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
Construction Products Regulation 2011 (retained EU law EUR 305/2011) as amended by the Construction Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020.
Annex V- Product Certification Body (AVCP) System 1
Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Control and indicating devices (fire safety), 96/577/EC
EN 54-16:2008 EN 54-2:1997 EN 54-2:1997/A1:2006 EN 54-2:1997/AC:1999
Fire alarm/detection,
fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Manual call points (fire safety), 96/577/EC
EN 54-11:2001 EN 54-11:2001/A1:2005
Fire alarm/detection,
fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Input/output devices (fire safety), 96/577/EC
EN 54-18:2005 EN 54-18:2005/AC:2007 EN 54-24:2008 EN 54-25:2008 EN 54-25:2008/AC:2010 EN 54-25:2008/AC:2012
Fire alarm/detection,
fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Alarm devices (fire safety), 96/577/EC
EN 14604:2005 EN 14604:2005/AC:2008 EN 54-3:2001 EN 54-3:2001/A1:2002 EN 54-3:2001/A2:2006 EN 54-23:2010
0010
Accredited to ISO/IEC
17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Intertek Testing & Certification Ltd 2
Issue No: 113 Issue date: 12 August 2021
Assessment Manager: JJ Page 29 of 46
Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5
Directive / Regulation
Conformity Assessment procedure/
Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
Construction Products Regulation 2011 (retained EU law EUR 305/2011) as amended by the Construction Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020. (cont’d)
Annex V- Product Certification Body (AVCP) System 1 (cont’d)
Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Short circuit isolators (fire safety), 96/577/EC
EN 54-17:2005 EN 54-17:2005/AC:2007
Fire alarm/detection,
fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Smoke, heat and flame detectors (fire safety), 96/577/EC
EN 54-10:2002 EN 54-10:2002/A1:2005 EN 54-12:2002 EN 54-5:2000 EN 54-5:2000/A1:2002 EN54-7:2000 EN 54-7:2000/A1:2002 EN 54-7:2000/A2:2006
Fire alarm/detection,
fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Foam systems-kits (fire safety), 96/577/EC
EN 54-7:2000 EN 54-7:2000/A1:2002 EN 54-7:2000/A2:2006
Fire alarm/detection,
fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Fire alarm systems-kits (fire safety), 96/577/EC
EN 54-21:2006
0010
Accredited to ISO/IEC
17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Intertek Testing & Certification Ltd 2
Issue No: 113 Issue date: 12 August 2021
Assessment Manager: JJ Page 30 of 46
Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5
Directive / Regulation
Conformity Assessment procedure/
Module/article
Category of products or individual products
Essential requirements: Product specification /
Properties/Standards
Construction Products Regulation 2011 (retained EU law EUR 305/2011) as amended by the Construction Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020. (cont’d)
Annex V- Product Certification Body (AVCP) System 1 (cont’d)
Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Combined fire detection and fire alarm systems-kits (fire safety), 96/577/EC
EN 54-20:2006 EN 54-20:2006/AC:2008
Fire alarm/detection,
fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Power supplies (fire detection/alarm components) (fire safety), 96/577/EC
EN 54-4:1997 EN 54-4:1997/A1:2002 EN 54-4:1997/A2:2006 EN 54-4:1997/AC:1999
Doors, windows,
shutters, blinds, gates and related building hardware (1/1) : - Building hardware related to doors, gates and windows (fire/smoke compartmentation and on escape routes), 99/93/EC
EN 1125:2008 EN 1154:1996/A1:2002 EN 1154:1996/A1:2002/AC:2006 EN 1155:1996/A1:2002/AC:2006 EN 1155:1997/A1:2002 EN 12209:2003 EN 12209:2003/AC:2005 EN 179:2008 EN 1935:2002 EN 1935:2002/AC:2003
0010
Accredited to ISO/IEC
17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Intertek Testing & Certification Ltd 2
Issue No: 113 Issue date: 12 August 2021
Assessment Manager: JJ Page 31 of 46
Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5
Directive / Regulation
Conformity Assessment procedure/
Module/article
Category of products or individual products
Essential requirements: Product specification /
Properties/Standards
Construction Products Regulation 2011 (retained EU law EUR 305/2011) as amended by the Construction Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020. (cont’d)
Annex V- Product Certification Body (AVCP) System 1 (cont’d)
Doors, windows, shutters, blinds, gates and related building hardware (1/1) : - Building hardware related to doors, gates and windows (fire/smoke compartmentation and on escape routes), 99/93/EC
EN14351-1:2006 EN14351-1:2006 + A1:2010 EN14351-1:2006 + A2:2016 EN13241-1:2003 EN13241-1:2003 + A1:2011 EN13241-1:2003 + A2:2016
Curtain walling (1/1)
96/580/EC EN13830:2003
Doors, windows,
shutters, blinds, gates and related building hardware (1/1) 2011/246/EU
EN 14846:2008 EN 16034:2014
0010
Accredited to ISO/IEC
17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Intertek Testing & Certification Ltd 2
Issue No: 113 Issue date: 12 August 2021
Assessment Manager: JJ Page 32 of 46
Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5
Directive / Regulation
Conformity Assessment procedure/
Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
Noise Emission in the Environment by Equipment for use Outdoors Regulations 2001
Internal Control of Production (Annex VI) (Schedule 9 of the SI) Unit Verification (Annex VII) (Schedule 10 of the SI)
Schedule 1 for: Lawnmowers Lawn Trimmers/Lawn Edge Trimmers Power Generators Welding Generators Compressors Motor Hoes Hand held concrete breakers and picks Hydraulic power packs
Conformity assessment procedures in accordance with Article 14 and Annexes VI and VII of the Directive and Regulation 10 and Schedules 9 and 10 of the SI
Supply of Machinery (Safety) Regulations 2008
EC type-examination (Annex IX
Annex IV A, Machinery, Items 1-17, B, Safety Components, Items 1-5 of Schedule 4
Essential Health and Safety requirements Annex I of the Directive and Schedule 2 Part 1 Annex I of the Regulations.
0010
Accredited to ISO/IEC
17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Intertek Testing & Certification Ltd 2
Issue No: 113 Issue date: 12 August 2021
Assessment Manager: JJ Page 33 of 46
Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5
Directive / Regulation
Conformity Assessment procedure/
Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
Gas Appliances (Enforcement) and Miscellaneous Amendment Regulations 2018
Annex II.1 EC Type Examination Annex II.2 EC Declartion of Conformity to Type Annex II.3 EC Declartion of Conformity to Type (guarantee of Production Quality) Annex II.5 EC Verification
Annex II.6 EC Unit Verification
Appliances burning Gaseous fuels used for:- Cooking Heating (up to 70kw) Hot water Production Refrigeration Lighting Washing Fittings Safety Devices Controlling devices (excluding electronic controls) Regulating Devices Sub assemblies
Examination and approval against the Essential Requirements of Annex 1 Examination and approval of the Quality System in accordance with Annex II of the Directive
Gas Appliances (Enforcement) and Miscellaneous Amendment Regulations 2018
Annex III.1 Module B: EU Type-Examination Annex III.2 Module C2: Conformity to Type Based on internal production control Annex III.3 Module D: Conformity to Type Based on QA of the production process Annex III.5 Conformity to type based on Product Verification Annex III.6 Conformity based on unit Verification
Domestic/Commercial – Appliances burning gaseous fuels used for cooking, heating (up to 70W), hot water production, refrigeration, lighting, and washing; Fittings: Safety devices, controlling devices, regulating devices, and sub-assemblies
Examination and approval against the Essential Requirements of Annex 1 and assessment of quality system in accordance with the relevant Module.
0010
Accredited to ISO/IEC
17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Intertek Testing & Certification Ltd 2
Issue No: 113 Issue date: 12 August 2021
Assessment Manager: JJ Page 34 of 46
Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5
Directive / Regulation
Conformity Assessment procedure/
Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
Gas Appliances (Enforcement) and Miscellaneous Amendment Regulations 2018 (cont’d)
Annex III.1 Module B: EU Type-Examination Annex III.2 Module C2: Conformity to Type Based on internal production control Annex III.3 Module D: Conformity to Type Based on QA of the production process Annex III.5 Conformity to type based on Product Verification Annex III.6 Conformity based on unit Verification
Domestic/Commercial – Appliances burning gaseous fuels used for cooking, heating (up to 70W), hot water production, refrigeration, lighting, and washing; Fittings: Safety devices, controlling devices, regulating devices, and sub-assemblies
Examination and approval against the Essential Requirements of Annex 1 and assessment of quality system in accordance with the relevant Module.
Electromagnetic Compatibility Regulations 2016
Technical Documentation review EU-type examination (Annex III)
Industrial Equipment Information Technology Equipment Alarm Systems AV Equipment Railway Systems Laboratory and Test Equipment Transmission Systems Automotive Systems Domestic Appliances Military Equipment
Essential Requirements Annex I of the Directive
0010
Accredited to ISO/IEC
17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Intertek Testing & Certification Ltd 2
Issue No: 113 Issue date: 12 August 2021
Assessment Manager: JJ Page 35 of 46
Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5
Directive / Regulation
Conformity Assessment procedure/
Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
Radio Equipment Regulations 2017
Annex IV Schedule 4 Technical Construction File EU-type examination (Annex III)
Citizens’ Band Cordless Telephone Mobile (Cellular) Telephone Handsets Private/Professional Mobile Radio Radio Frequency Identification Satellite Earth Station Short Range Devices Telemetry/ Telecommand Wireless Microphone
Essential Requirement Article 3 of the Directive and Schedule 3 of the Regulations
Boiler (Efficiency) Regulations 1993
Module B (Annex III): EC type-examination Module C (Annex IV): Conformity to type Module D (Annex IV): Production quality assurance (operate an approved quality system for production, final appliance inspection and testing)
Hot-water boilers fired with liquid or gaseous fuels with a rated output of no less than 4 kW and no more than 400 kW
Examination and approval against the Essential Requirements of Annex 1 and assessment of quality system in accordance with the relevant Module.
0010
Accredited to ISO/IEC
17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Intertek Testing & Certification Ltd 2
Issue No: 113 Issue date: 12 August 2021
Assessment Manager: JJ Page 36 of 46
Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5
Directive / Regulation
Conformity Assessment procedure/
Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
Equipment and Protective Systems Intended for use in Potentially Explosive Atmospheres Regulations 2016
Annex III / Schedule 6 EC-Type examination Annex IV /Schedule 7 Production QA Annex V / Schedule 8 Product verification Annex VI / Schedule 9 Conformity to type Annex VII / Schedule 10 Product QA Annex IX / Schedule 12 Unit verification Article 8 (1) (b) (ii), Regulation 10 (3)(b) iii)
Equipment in :- Equipment group I, categories M1 and M2. Equipment group II, categories 1, 2 and 3.
Storage of Technical files
Essential Health and Safety Requirements, Annex II of the Directive and Schedule 3 of the Regulations Acknowledgment of receipt and retention of technical files
Mutual Recognition Agreements between the UK and Australia/New Zealand
Conformity Assessment Body
Low Voltage Products Sector Machinery Products Sector
Designation as a CAB in accordance with Chapter 1
0010
Accredited to ISO/IEC
17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Intertek Testing & Certification Ltd 2
Issue No: 113 Issue date: 12 August 2021
Assessment Manager: JJ Page 37 of 46
Accreditation for the purpose of Notified Body Activity relating to the Northern Ireland market (CE + UKNI) taking into account EA-2/17
Directive / Regulation
Conformity Assessment procedure/
Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
Construction Products Regulation 2011 (retained EU law EUR 305/2011) as amended by the Construction Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020.
Annex V- Product Certification Body (AVCP) System 1
Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Control and indicating devices (fire safety), 96/577/EC
EN 54-16:2008 EN 54-2:1997 EN 54-2:1997/A1:2006 EN 54-2:1997/AC:1999
Fire alarm/detection,
fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Manual call points (fire safety), 96/577/EC
EN 54-11:2001 EN 54-11:2001/A1:2005
Fire alarm/detection,
fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Input/output devices (fire safety), 96/577/EC
EN 54-18:2005 EN 54-18:2005/AC:2007 EN 54-24:2008 EN 54-25:2008 EN 54-25:2008/AC:2010 EN 54-25:2008/AC:2012
Fire alarm/detection,
fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Alarm devices (fire safety), 96/577/EC
EN 14604:2005 EN 14604:2005/AC:2008 EN 54-3:2001 EN 54-3:2001/A1:2002 EN 54-3:2001/A2:2006 EN 54-23:2010
0010
Accredited to ISO/IEC
17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Intertek Testing & Certification Ltd 2
Issue No: 113 Issue date: 12 August 2021
Assessment Manager: JJ Page 38 of 46
Accreditation for the purpose of Notified Body Activity relating to the Northern Ireland market (CE + UKNI) taking into account EA-2/17
Directive / Regulation
Conformity Assessment procedure/
Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
Construction Products Regulation 2011 (retained EU law EUR 305/2011) as amended by the Construction Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020. (cont’d)
Annex V- Product Certification Body (AVCP) System 1 (cont’d)
Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Short circuit isolators (fire safety), 96/577/EC
EN 54-17:2005 EN 54-17:2005/AC:2007
Fire alarm/detection,
fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Smoke, heat and flame detectors (fire safety), 96/577/EC
EN 54-10:2002 EN 54-10:2002/A1:2005 EN 54-12:2002 EN 54-5:2000 EN 54-5:2000/A1:2002 EN54-7:2000 EN 54-7:2000/A1:2002 EN 54-7:2000/A2:2006
Fire alarm/detection,
fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Foam systems-kits (fire safety), 96/577/EC
EN 54-7:2000 EN 54-7:2000/A1:2002 EN 54-7:2000/A2:2006
Fire alarm/detection,
fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Fire alarm systems-kits (fire safety), 96/577/EC
EN 54-21:2006
0010
Accredited to ISO/IEC
17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Intertek Testing & Certification Ltd 2
Issue No: 113 Issue date: 12 August 2021
Assessment Manager: JJ Page 39 of 46
Accreditation for the purpose of Notified Body Activity relating to the Northern Ireland market (CE + UKNI) taking into account EA-2/17
Directive / Regulation
Conformity Assessment procedure/
Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
Construction Products Regulation 2011 (retained EU law EUR 305/2011) as amended by the Construction Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020. (cont’d)
Annex V- Product Certification Body (AVCP) System 1 (cont’d)
Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Combined fire detection and fire alarm systems-kits (fire safety), 96/577/EC
EN 54-20:2006 EN 54-20:2006/AC:2008
Fire alarm/detection,
fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Power supplies (fire detection/alarm components) (fire safety), 96/577/EC
EN 54-4:1997 EN 54-4:1997/A1:2002 EN 54-4:1997/A2:2006 EN 54-4:1997/AC:1999
Doors, windows,
shutters, blinds, gates and related building hardware (1/1) : - Building hardware related to doors, gates and windows (fire/smoke compartmentation and on escape routes), 99/93/EC
EN 1125:2008 EN 1154:1996/A1:2002 EN 1154:1996/A1:2002/AC:2006 EN 1155:1996/A1:2002/AC:2006 EN 1155:1997/A1:2002 EN 12209:2003 EN 12209:2003/AC:2005 EN 179:2008 EN 1935:2002 EN 1935:2002/AC:2003
0010
Accredited to ISO/IEC
17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Intertek Testing & Certification Ltd 2
Issue No: 113 Issue date: 12 August 2021
Assessment Manager: JJ Page 40 of 46
Accreditation for the purpose of Notified Body Activity relating to the Northern Ireland market (CE + UKNI) taking into account EA-2/17
Directive / Regulation
Conformity Assessment procedure/
Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
Construction Products Regulation 2011 (retained EU law EUR 305/2011) as amended by the Construction Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020. (cont’d)
Annex V- Product Certification Body (AVCP) System 1 (cont’d)
Doors, windows, shutters, blinds, gates and related building hardware (1/1) : - Building hardware related to doors, gates and windows (fire/smoke compartmentation and on escape routes), 99/93/EC
EN14351-1:2006 EN14351-1:2006 + A1:2010 EN14351-1:2006 + A2:2016 EN13241-1:2003 EN13241-1:2003 + A1:2011 EN13241-1:2003 + A2:2016
Curtain walling (1/1)
96/580/EC EN13830:2003
Doors, windows,
shutters, blinds, gates and related building hardware (1/1) 2011/246/EU
EN 14846:2008 EN 16034:2014
0010
Accredited to ISO/IEC
17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Intertek Testing & Certification Ltd 2
Issue No: 113 Issue date: 12 August 2021
Assessment Manager: JJ Page 41 of 46
Accreditation for the purpose of Notified Body Activity relating to the Northern Ireland market (CE + UKNI) taking into account EA-2/17
Directive / Regulation
Conformity Assessment procedure/
Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
Noise Emissions in the Environment (Directive 2000/14/EC) by Equipment for use Outdoors implemented in Northern Ireland by the Noise Emission in the Environment by Equipment for use Outdoors Regulations 2001.
Internal Control of Production (Annex VI) (Schedule 9 of the SI) Unit Verification (Annex VII) (Schedule 10 of the SI)
Schedule 1 for: Lawnmowers Lawn Trimmers/Lawn Edge Trimmers Power Generators Welding Generators Compressors Motor Hoes Hand held concrete breakers and picks Hydraulic power packs
Conformity assessment procedures in accordance with Article 14 and Annexes VI and VII of the Directive and Regulation 10 and Schedules 9 and 10 of the SI
Machinery (Directive 2006/42/EC) implemented in Northern Ireland by the Supply of Machinery (Safety) Regulations 2008
EC type-examination (Annex IX
Annex IV A, Machinery, Items 1-17, B, Safety Components, Items 1-5 of Schedule 4
Essential Health and Safety requirements Annex I of the Directive and Schedule 2 Part 1 Annex I of the Regulations.
0010
Accredited to ISO/IEC
17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Intertek Testing & Certification Ltd 2
Issue No: 113 Issue date: 12 August 2021
Assessment Manager: JJ Page 42 of 46
Accreditation for the purpose of Notified Body Activity relating to the Northern Ireland market (CE + UKNI) taking into account EA-2/17
Directive / Regulation
Conformity Assessment procedure/
Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
Gas Appliances (Regulation (EU) 2016/426) implemented in Northern Ireland by the Gas Appliances (Enforcement) and Miscellaneous Amendment Regulations 2018
Annex II.1 EC Type Examination Annex II.2 EC Declartion of Conformity to Type Annex II.3 EC Declartion of Conformity to Type (guarantee of Production Quality) Annex II.5 EC Verification
Annex II.6 EC Unit Verification
Appliances burning Gaseous fuels used for:- Cooking Heating (up to 70kw) Hot water Production Refrigeration Lighting Washing Fittings Safety Devices Controlling devices (excluding electronic controls) Regulating Devices Sub assemblies
Examination and approval against the Essential Requirements of Annex 1 Examination and approval of the Quality System in accordance with Annex II of the Directive
Gas Appliances (Regulation (EU) 2016/426) implemented in Northern Ireland by the Gas Appliances (Enforcement) and Miscellaneous Amendment Regulations 2018
Annex III.1 Module B: EU Type-Examination Annex III.2 Module C2: Conformity to Type Based on internal production control Annex III.3 Module D: Conformity to Type Based on QA of the production process Annex III.5 Conformity to type based on Product Verification Annex III.6 Conformity based on unit Verification
Domestic/Commercial – Appliances burning gaseous fuels used for cooking, heating (up to 70W), hot water production, refrigeration, lighting, and washing; Fittings: Safety devices, controlling devices, regulating devices, and sub-assemblies
Examination and approval against the Essential Requirements of Annex 1 and assessment of quality system in accordance with the relevant Module.
0010
Accredited to ISO/IEC
17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Intertek Testing & Certification Ltd 2
Issue No: 113 Issue date: 12 August 2021
Assessment Manager: JJ Page 43 of 46
Accreditation for the purpose of Notified Body Activity relating to the Northern Ireland market (CE + UKNI) taking into account EA-2/17
Directive / Regulation
Conformity Assessment procedure/
Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
Gas Appliances (Regulation (EU) 2016/426) implemented in Northern Ireland by the Gas Appliances (Enforcement) and Miscellaneous Amendment Regulations 2018 (cont’d)
Annex III.1 Module B: EU Type-Examination Annex III.2 Module C2: Conformity to Type Based on internal production control Annex III.3 Module D: Conformity to Type Based on QA of the production process Annex III.5 Conformity to type based on Product Verification Annex III.6 Conformity based on unit Verification
Domestic/Commercial – Appliances burning gaseous fuels used for cooking, heating (up to 70W), hot water production, refrigeration, lighting, and washing; Fittings: Safety devices, controlling devices, regulating devices, and sub-assemblies
Examination and approval against the Essential Requirements of Annex 1 and assessment of quality system in accordance with the relevant Module.
Electromagnetic Compatibility (Directive 2014/30/EU) implemented in Northern Ireland by the Electromagnetic Compatibility Regulation 2016
Technical Documentation review EU-type examination (Annex III)
Industrial Equipment Information Technology Equipment Alarm Systems AV Equipment Railway Systems Laboratory and Test Equipment Transmission Systems Automotive Systems Domestic Appliances Military Equipment
Essential Requirements Annex I of the Directive
0010
Accredited to ISO/IEC
17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Intertek Testing & Certification Ltd 2
Issue No: 113 Issue date: 12 August 2021
Assessment Manager: JJ Page 44 of 46
Accreditation for the purpose of Notified Body Activity relating to the Northern Ireland market (CE + UKNI) taking into account EA-2/17
Directive / Regulation
Conformity Assessment procedure/
Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
Radio Equipment (Directive 2014/53/EU) implemented in Northern Ireland by the Radio Equipment Regulations 2017
Annex IV Schedule 4 Technical Construction File EU-type examination (Annex III)
Citizens’ Band Cordless Telephone Mobile (Cellular) Telephone Handsets Private/Professional Mobile Radio Radio Frequency Identification Satellite Earth Station Short Range Devices Telemetry/ Telecommand Wireless Microphone
Essential Requirement Article 3 of the Directive and Schedule 3 of the Regulations
Boiler Efficiency (Directive 92/42/EEC) implemented in Northern Ireland by the Boiler (Efficiency) Regulations 1993
Module B (Annex III): EC type-examination Module C (Annex IV): Conformity to type Module D (Annex IV): Production quality assurance (operate an approved quality system for production, final appliance inspection and testing)
Hot-water boilers fired with liquid or gaseous fuels with a rated output of no less than 4 kW and no more than 400 kW
Examination and approval against the Essential Requirements of Annex 1 and assessment of quality system in accordance with the relevant Module.
0010
Accredited to ISO/IEC
17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Intertek Testing & Certification Ltd 2
Issue No: 113 Issue date: 12 August 2021
Assessment Manager: JJ Page 45 of 46
Accreditation for the purpose of Notified Body Activity relating to the Northern Ireland market (CE + UKNI) taking into account EA-2/17
Directive / Regulation
Conformity Assessment procedure/
Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
Equipment Intended for use in Potentially Explosive Atmospheres (ATEX) (Regulation 2014/34/EU) implemented in Northern Ireland by the Equipment and Protective Systems Intended for use in Potentially Explosive Atmospheres Regulations 2016
Annex III / Schedule 6 EC-Type examination Annex IV /Schedule 7 Production QA Annex V / Schedule 8 Product verification Annex VI / Schedule 9 Conformity to type Annex VII / Schedule 10 Product QA Annex IX / Schedule 12 Unit verification Article 8 (1) (b) (ii), Regulation 10 (3)(b) iii)
Equipment in :- Equipment group I, categories M1 and M2. Equipment group II, categories 1, 2 and 3.
Storage of Technical files
Essential Health and Safety Requirements, Annex II of the Directive and Schedule 3 of the Regulations Acknowledgment of receipt and retention of technical files
Mutual Recognition Agreements between the UK and Australia/New Zealand
Conformity Assessment Body
Low Voltage Products Sector Machinery Products Sector
Designation as a CAB in accordance with Chapter 1
END
0010
Accredited to ISO/IEC
17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Intertek Testing & Certification Ltd 2
Issue No: 113 Issue date: 12 August 2021
Assessment Manager: JJ Page 46 of 46
Overseas Locations where key notifed body activities covered by the above Accreditation Standard are undertaken
KL 1 3933 US Route 11 Cortland NY 13045
KL 2 1809 10th Street Suite 400 Plano TX 75074
KL 3 Block E No 7-2 Guang Dong Science Park Caipin Road Guangzhou Science City GETDD Guangzhou Pr China
KL 4 6/F Block D Huahan Building Langshan Road Nanshan District Shenzhen China
KL 5 2/F Garment Centre 576 Castle Peak Road Kowloon Hong Kong
Confirmed Overseas Key Notified Body Location Activities
Location Directive Contract Review
Evaluation Review Decision Making
Surveillance Control
KL 1, ATEX ✓ ✓ ✓ ✓ ✓
KL 2, KL 3 GAR ✓ ✓ ✓ ✓ ✓
KL 4, KL 5 RTTE ✓ ✓ ✓ ✓ ✓