ISSUE RECORD

1. THE CONTRACTOR SHALL INCLUDE IN HIS PRICE ALL COSTS ASSOCIATED WITH REMOVALS ANDRELOCATIONS OF HVAC WORK AS DESCRIBED ON THE DRAWINGS AND IN THE SPECIFICATIONS.NO CLAIMS FOR ADDITIONAL WORK ASSOCIATED WITH DEMOLITION WILL BE ACCEPTED, EXCEPTIN CERTAIN CASES CONSIDERED JUSTIFIABLE BY THE OWNER/ENGINEER.

MECHANICAL DEMOLITION NOTES

1. GENERAL NOTES, SYMBOL LIST AND DETAILS ARE APPLICABLE TO ALL HVAC/MECHANICAL DRAWINGS.

2. ALL WORK IS NEW UNLESS OTHERWISE NOTED.

3. DRAWINGS ARE DIAGRAMMATIC. DETERMINE LOCATIONS OF SYSTEMS AND COMPONENTS IN FIELD.RELOCATE EXISTING WORK THAT INTERFERES WITH WORK OF THIS CONTRACT.

4. COORDINATE THIS WORK WITH THAT OF OTHER TRADES.

5. NEITHER ACCURACY NOR COMPLETION OF SERVICES AND UTILITY LOCATIONS SHOWN ON DRAWINGS ISGUARANTEED. DETERMINE EXACT LOCATIONS OF EXISTING SERVICES AND UTILITIES IN FIELD, WHETHER ORNOT SHOWN ON DRAWINGS. EXERCISE CAUTION AND IDENTIFY LOCATIONS OF UNMARKED UTILITY LINES ASNECESSARY TO PERFORM WORK OF THIS SECTION.

6. MANUFACTURERS MODEL NUMBERS ARE SPECIFIED SOLELY TO ESTABLISH STANDARDS OF QUALITY FORPERFORMANCE AND MATERIALS.

7. PRODUCT INSTALLATION SHALL ADHERE TO MANUFACTURERS RECOMMENDATIONS.

8. PROVIDE ACCESS PANELS FOR EQUIPMENT THAT REQUIRES PERIODIC SERVICE.

9. PROVIDE HANGERS, INSERTS, ANCHORS, SUPPLEMENTAL STEEL & SUPPORTS AS REQUIRED TO SUPPORTDUCTWORK AND EQUIPMENT FROM STRUCTURE.

10. SCHEDULE WORK OF THIS SECTION TO AVOID INTERFERING WITH EXISTING OPERATIONS IN THE FACILITY.

11. COORDINATE ROOF PENETRATIONS WITH WORK OF OTHER SECTIONS AND WITH FLASHINGREQUIREMENTS. MECHANICAL CONTRACTOR TO NOTIFY OWNER PRIOR TO STARTING WORK TO VERIFYCOMPLIANCE WITH BOND AND WARRANTY OF EXISTING ROOF.

12. RUN DUCTS CONCEALED, UNLESS OTHERWISE SPECIFIED AND CLEAR OF CEILING INSERTS.

13. INSTALL THERMOSTATS 4'-6" ABOVE FINISHED FLOOR OR AS DIRECTED OTHERWISE BY ARCHITECT.

14. STRUCTURAL WELDING SHALL BE CONTINUOUS 1/4" FILLET UNLESS REQUIRED OTHERWISE.

AIR SYSTEMS

15. AIR SYSTEMS REFER TO ARCHITECTURAL REFLECTED CEILING PLANS FOR EXACT LOCATIONS OF AIRDEVICES.

16. INTERNAL AIRFLOW DIMENSIONS ARE SHOWN FOR DUCTS. INCREASE LINED DUCT SIZE AS NECESSARY TOMAINTAIN FREE FLOW AREA INDICATED.

17. USE FLAT TRANSVERSE SEAM FOR DUCTWORK WHERE SPACE AVAILABLE DICTATES.

18. DIFFUSER SIZES SHOWN ARE NECK SIZES. REGISTERS AND GRILLE SIZES ARE NOMINAL.

19. PROVIDE VOLUME DAMPERS OR OTHER APPROVED BALANCING DEVICES AT DUCT BRANCHES AND RUNOUTS, AND AT REGISTER GRILLE AND DIFFUSER NECKS IN SUPPLY, RETURN AND EXHAUST DUCTWORKWHETHER SHOWN OR NOT.

20. DUCTWORK DOWNSTREAM OF ALL FAN-POWERED VAV BOXES SHALL BE ACOUSTICALLY LINED WITH 1"ACOUSTICAL LINING FOR A MINIMUM OF 15 FEET.

21. PROVIDE CLEARANCE IN FRONT OF ALL ELECTRIC CONTROL PANELS PER N.E.C. AND MFG. REQUIREMENTS.

22. PROVIDE DUCT TRANSITIONS FROM FAN-POWERED VAV BOX INLET/OUTLET DUCT WORK AT SIZESINDICATED TO FAN-POWERED VAV BOX INLET/OUTLET UNIT CONNECTIONS.

23. FAN-POWERED VAV DUCT INLET SIZE SHALL BE AS SCHEDULED OR AS INDICATED ON THE FLOOR PLANS.PROVIDE TRANSITION FROM DUCT SIZE INDICATED ON THE FLOOR PLANS TO SCHEDULED SIZE MINIMUM 3'-6"

FROM FAN-POWERED VAV BOX INLETS.

MECHANICAL GENERAL NOTESSINGLE LINE DUCTWORK OR EQUIPMENT - EXISTING

EXISTING DUCTWORK TO BE REMOVED

DUCTWORK WITH ACOUSTIC LINING

VOLUME DAMPER

FIRE DAMPER AND ACCESS DOOR

BACKDRAFT DAMPER

AUTOMATIC DAMPER

HVAC DUCTWORKSINGLE LINE DUCTWORK OR EQUIPMENT - NEW

DUCTWORK POSITIVE PRESSURE(SUPPLY AIR OR FAN DISCHARGE)

DUCTWORK NEGATIVE PRESSURE(RETURN, EXHAUST OR OUTSIDE AIR)

VD

FD

BDD

M

COMBINATION SMOKE AND FIRE DAMPERWITH ACCESS DOOR

RISE IN DUCTWORK (IN DIRECTION OF AIR FLOW)R

DROP IN DUCTWORK (IN DIRECTION OF AIR FLOW)D

CENTERLINE

CUBIC FEET PER MINUTEOR CFM

DIAMETERØ

SQUARE FEET

OVAL DUCTWORK

TYPE A CEILING DIFFUSER400 CFM SUPPLY AIR

RECTANGULAR CEILING DIFFUSER WITH 12"x12" NECK400 CFM SUPPLY AIR

12x12 CD400

10" BY 8" CEILING REGISTER (CEILING GRILLE)300 CFM RETURN AIR

10x8 CR(CG)300

RECTANGULAR DIFFUSER WITH BLANKING PLATE

10" BY 6" TOP REGISTER, 150 CFM SUPPLY AIR10x8 TR150

10x8 TR(TG)150

10" BY 6" TOP REGISTER (TOP GRILLE)150 CFM RETURN AIR

10x8 BR(BG)150

10" BY 6" BOTTOM REGISTER (BOTTOM GRILLE)150 CFM RETURN AIR

VANED ELBOW (SEE DETAIL)

VANED ELBOW (SEE DETAIL) OR RADIUS ELBOW

FLEXIBLE DUCT

SLOTTED LINEAR DIFFUSER WITH PLENUM

DUCT FLEXIBLE CONNECTION

VERTICAL DUCT DROP(IN DIRECTION OF AIR FLOW)

VERTICAL DUCT RISE(IN DIRECTION OF AIR FLOW)

VARIABLE AIR VOLUME BOXTYPE AVARIABLE AIR VOLUME BOX, TYPE A,WITH REHEAT COILVARIABLE AIR VOLUME BOX, TYPE A, WITHSOUND ATTENUATOR AND REHEAT COIL

THERMOSTAT

H HUMIDISTAT

SMOKE DETECTORSD

HUMIDIFIERH

MECHANICAL SYMBOL LIST

AUTOMATIC SMOKE DAMPER

RISE IN DUCTWORK (IN DIRECTION OF AIR FLOW)UC

HVAC GENERALPOINT OF CONNECTION

POINT OF DISCONNECTION

NEW STEEL CUT

EXISTING STEEL CUT

DIRECT DIGITAL CONTROL PANEL

SECTION DESIGNATION

SHEET No. WHERE SECTION IS SHOWN

EQUIPMENT TAG NUMBERXXX-X-X-XX

RTU DESIGNATIONEQUIPMENT DESIGNATION

FPVAV-1-4-05

DDCP

HVAC EQUIPMENT DESIGNATIONS

SD M

FSD M

T

VAV-A

VAV-A

VAV-A

SECTION DESIGNATION

SHEET No. WHERE SECTION IS SHOWN

FLOOR DESIGNATION

UNIT NUMBER 5

RTU-1FAN-POWERED VAV BOX

FOURTH FLOOR

O2C CARBON DIOXIDE SENSOR

S SPACE SENSOR

S THERMOSTAT WITH BASE

SHEET TITLE

SHEET NUMBER

Opus Design Build, L.L.C.

Opus AE Group, L.L.C.

10350 Bren Road WestMinnetonka, MN 55343-0110952-656-4444


PLO

TD

ATE:

PROJECT

PROJECT NUMBER

CONSULTANT

REGISTRATION

DRAWN BY

CHECKED BY

PROJECT MANAGER

DATE

FORREFERENCE

ONLY

PROJECT ADDRESS

7/15

/201

66:

35:2

9P

M

MECHANICALCOVER SHEET

M-000

Xcel Energy -SPS Amarillo HQOfficeAmarillo, Texas

30780100

D. LUCHT

A. ALLMON

D. REIDER

07/13/16

MECHANICAL ABBREVIATIONSHD HEADHR HOURHRC HEAT RECOVERY COILHT HEIGHTHTWP HIGH TEMPERATURE WATER PUMPHV HEATING AND VENTILATINGHWP HOT WATER PUMPHX HEAT EXCHANGERHZ FREQUENCE

IN INCH OR INCHESIPS IRON PIPE SIZE

KW KILOWATTKX KITCHEN RANGE HOOD EXHAUST

L LENGTHLAT LEAVING AIRE TEMPERATURELBS POUNDSLCP LOCAL CONTROL PANELLD LINEAR DIFFUSERLDB LEAVING DRY BULB TEMPERATURELF, LIN.FT. LINEAR FEETLR LINEAR RETURNLRA LOCKED ROTOR AMPSLV LOW VELOCITYLWB LEAVING WET BULB TEMPERATURELWT LEAVING WATER TEMPERATURE

MAV MANUAL AIR VENTMAX MAXIMUMMB MIXING BOXMBH THOUSAND BTU PER HOURMCC MOTOR CONTROL CENTERMER MECHANICAL EQUIPMENT ROOMMHP MOTOR HORSEPOWERMIN MINIMUMMM MILLIMETERMOT MOTORMOV MOTOR OPERATED VALVEMX MECHANICAL ROOM EXHAUST

N.O. NORMALLY OPENNC NORMALLY CLOSEDNIC NOT IN CONTRACTNO. NUMBERNPSH NET POSITIVE SUCTION HEADNTS NOT TO SCALE

OA OUTSIDE AIROAI OUTSIDE AIR INTAKEOD OUTSIDE DIAMETEROED OPEN END DUCTOV OUTLET VELOCITY

P PUMPPCC PRE-COOLING COILPD PRESSURE DROPPF PRE-FILTERPHC PREHEAT COILPRV PRESSURE REDUCING VALVEPSI POUNDS PER SQUARE INCHPSIA PSI ABSOLUTEPSIG PSI GAUGE

(RE) RELOCATED EXISTING(RRO) EXISTING TO REMOVED AND RETURN TO OWNERR RISERA RETURN AIRRAD RADIATIONRCC RECOOLING COILREFR REFRIGERANTRF RETURN FANRH RELATIVE HUMIDITYRHC REHEAT COILRHWP REHEAT WATER PUMPRLA RUNNING LOAD AMPSRM ROOMROT ROTATIONRPM REVOLUTIONS PER MINUTE

SA SUPPLY AIRSAU SOUND ATTENUATION UNITSCHWP SECONDARY CHILLED WATER PUMPSD SMOKE DETECTORSF SUPPLY FANSHWP SECONDARY HOT WATER PUMPSLD STRIPLINE DIFFUSERSMK.CTL. SMOKE CONTROL OPERATIONSP STATIC PRESSURESPEC SPECIFICATIONSQ.FT. SQUARE FEETSS STAINLESS STEELSX SMOKE EXHAUST

T THROATTAD TOP ANGULAR DISCHARGETDH TOTAL DYNAMIC HEADTEMP TEMPERATURETF TERMINAL FILTERTG TOP GRILLETHD TOP HORIZONTAL DISCHARGETR TOP REGISTERTRD TRANSFER DUCTTRF TRANSFER FANTRG TRANSFER GRILLETS TIP SPEEDTT TOP THROATTV TURNING VANESTX TOILET EXHAUSTTYP TYPICAL

UBD UPBLAST DISCHARGEUH UNIT HEATERUON UNLESS OTHERWISE NOTED

V VOLTSVA VENTILATION AIRVAC VACUUMVAV VARIABLE AIR VOLUME UNITVF VENTILATION FANVFD VARIABLE FREQUENCY DRIVEVIV VARIABLE INLET VANESVP VACUUM PUMP

W WIDTHW/ WITHW/O WITHOUTWB WET BULBWC WATER COLUMNWG WATER GAUGEWMS WIRE MESH SCREENWP WORKING PRESSUREWSP WORKING STEAM PRESSURE

A AMPERESAAV AUTOMATIC AIR VENTAC AIR CONDITIONINGACCU AIR COOLED CONDENSING UNITACS AUTOMATIC CONTROL SYSTEMACU AIR CONDITIONING UNITAD ACCESS DOORAF AFTER FILTERAFDW AIR FOIL DOUBLE WIDTHAFF ABOVE FINISHED FLOORAFMS AIR FLOW MONITORING STATIONAFSW AIR FOIL SINGLE WIDTHAHU AIR HANDLING UNITAL ALUMINUMAMCS AUTOMATED MONITORING AND CONTROL SYSTEMAP ACCESS PANEL

BAD BOTTOM ANGULAR DISCHARGEBD BLOW DOWNBF BOOSTER FANBFP BOTTOM GRILLEBG BOILER FEED PUMPBHD BOTTOM HORIZONTAL DISCHARGEBHP BRAKE HORSEPOWERBIDW BACKWARD INCLINE DOUBLE WIDTHBISW BACKWARD INCLUDE SINGLE WIDTHBMS BUILDING MANAGEMENT SYSTEMBR BOTTOM REGISTERBT BOTTOM THROATBTU BRITISH THERMAL UNITBTUH BTU PER HOUR

C CONVERTORCAC CONTROL AIR COMPRESSORCC COOLING COILCCP CENTRAL CONTROL PANELCCW COUNTER CLOCKWISECD CEILING DIFFUSERCFFC CAP FOR FUTURE CONNECTIONCFM CUBIC FEET PER MINUTECFP CHEMICAL FEED PUMPCG CEILING GRILLECH CHILLERCHWP CHILLED WATER PUMPCLG CEILINGCOD CLEAN-OUT DOORCOMPR COMPRESSORCOND CONDENSATECOV CHAIR OPERATED VALVECP CONDENSATE PUMPCPA CONTROL POINT ADJUSTMENTCPU CONDENSATE PUMP UNITCR CEILING REGISTERCT COOLING TOWERCU FT CUBIC FEETCU IN CUBIC INCHESCUH CABINET UNIT HEATERCV CONSTANT VOLUMECW CLOCKWISECWP CONDENSER WATER PUMP°C DEGREES CENTIGRADE (CELSIUS)

D DROPDB DRY BULBDBD DOWN BLAST DISCHARGEDF DUCT FURNACE UNITDFWP DEARATOR FEED WATER PUMPDG DIESEL GENERATORDHW DOMESTIC HOTER WATERDMPR DAMPERDN DOWNDOP DIESEL OIL PUMPDWG DRAWINGDX DIRECT EXPANSIONø,DIAM DIAMETER

(E) EXISTING TO REMAIN(ER) EXISTING TO BE REMOVED(ERR) EXISTING TO BE REMOVED & RELOCATEDEA EACHEAT ENTERING AIR TEMPERATUREEDB ENTERING DRY BULB TEMPERATUREEDH ELECTRIC DUCT HEATEREDR EQUIVALENT DIRECT RADIATIONEF EXHAUST FANEL ELEVATIONELEC ELECTRICELEV ELEVATOREQ EQUALET EXPANSION TANKEUH ELECTRIC UNIT HEATEREWB ENTERING WET BULBEWT ENTERING WET TEMPERATUREEXH EXHUASTEXIST EXISTINGEXP EXPANSION

F FILTERF&T FLOAT AND THERMOSTATICFA FREE AREA (SQ.FT.)FC FLEXIBLE CONNECTIONFCDW FORWARD CURVED DOUBLE WIDTHFCSW FORWARD CURVED SINGLE WIDTHFCU FAN COIL UNITFD FIRE DAMPERFF FINAL FILTERFG FINISHED GRADEFIN FL FINISHED FLOORFLA FULL LOAD AMPERESFOP FUEL OIL PUMPFOT FUEL COIL TANKFPI FINS PER INCHFPM FEET PER MINUTEFPS FEET PER SECONDFPVAV FAN-POWERED VARIABLE AIR VOLUME UNITFR FLOOR REGISTERFT FEETFTR FINNED TUBE RADIATIONFV FACE VELOCITYFX FUME HOOD EXHAUST°F DEGREES FAHRENHEIT

G GAUGEGAL GALLONGPH GALLONS PER HOURGPM GALLONS PER MINUTEGX GENERAL EXHUAST

H HUMIDIFIERHALX HALON EXHAUSTHC HEATING COIL

MECHANICAL DRAWING LISTDRAWING No. DRAWING TITLEM-000 MECHANICAL COVER SHEETMD-104 LEVEL 4 - DEMO MECHANICAL FLOOR PLANMD-105 LEVEL 5 - DEMO MECHANICAL FLOOR PLANMD-106 LEVEL 6 - DEMO MECHANICAL FLOOR PLANMD-107 LEVEL 7 - DEMO MECHANICAL FLOOR PLANM-104 LEVEL 4 - MECHANICAL FLOOR PLANM-105 LEVEL 5 - MECHANICAL FLOOR PLANM-106 LEVEL 6 - MECHANICAL FLOOR PLANM-107 LEVEL 7 - MECHANICAL FLOOR PLANM-200 MECHANICAL SCHEDULESM-201 MECHANICAL SCHEDULESM-300 MECHANICAL DETAILS

A K F

Arlington / Boston / Mexico City / Minneapolis / New York /Philadelphia / Puebla / Princeton / Rochester / Stamford

Global Engineering and Specialty Service

100 SOUTH 5th STREET, SUITE 2060MINNEAPOLIS, MN 55402

T: 763.350.9324 F: 612.354.2162

ISSUE RECORD

07/13/16 MEP BID SET

UP

26/2

026

/20

42/20

8"Ø/S-1200 CFM

22x10/R-1

12x10/S-250 CFM

10"Ø/S-1275 CFM

10"Ø/S-1275 CFM

12x8/E-275 CFM

22x10/E-1375 CFM22x10/E-1375 CFM

24x14/S-31500 CFM

18x12/S-31000 CFM

10"Ø/S-4400 CFM

10"Ø/S-4400 CFM

10"Ø/S-4300 CFM 22x22/R-2

22x22/R-2

12"Ø/S-1600 CFM

14"Ø/S-1850 CFM

22/16

26/2

026

/20

22/16

26/20

26/20

26/2

0

22/16

8ø

12x1

0

101 FSD

18x1

0

10ø

10ø

10ø

14ø

14ø

14ø

14ø

14ø

14ø

5ø

20x10

12x1

020

x10

12x10

42/20

60x24

FSD

6ø

FSD

22/16

FSD

10ø24x10

16x1

0

18x10

FSD

FSD

26/2

0

14ø

22x1

412

ø14

ø

42/20

18x1010ø

FD

FD

14ø

VAV-A

FPVAV-A

FPVAV-A

FPVAV-A

FPVAV-A FPVAV-A FPVAV-A

FPVAV-A

FPVAV-A

FPVAV-A

FPVAV-AFPVAV-B

VAV-B

STAIR AA-4

MECHSHAFT

3-D

LOBBY407

OFFICE400

STAIR CC-4

MENS402

WOMENS404

ELEC406

ELEV.LOBBY

408

DATA405

LOBBY401

STAR BB-4

ELEV 44-J

ELEV 54-K

MECHSHAFT

4-GJAN403

S

S

S

S S S

S S

S

S

S S

SSD CO

2

SD CO

2

2 3 4 5 6 7 8 9 10 11 12 13

G.8

H

J

K

K.7

L

H.7

H.4

2 3 4 5 6 7 8 9 10 11 12 13

G.8

H

J

K

K.7

L

H.7

H.4

H.7

L

K.7

K

J

H.4

H

G.8

1312111098765432

DRAWING NOTES

1. REMOVE EXISTING DUCTWORK SHOWN HATCHED.2. REMOVE EXISTING FPVAV TERMINAL UNITS SHOWN HATCHED AND SALVAGE FOR RE-USE

SHEET TITLE

SHEET NUMBER





PLO

TD

ATE:

PROJECT

PROJECT NUMBER

CONSULTANT

REGISTRATION

DRAWN BY

CHECKED BY

PROJECT MANAGER

DATE

FORREFERENCE

ONLY

PROJECT ADDRESS

7/15

/201

66:

35:5

6P

M

LEVEL 4 - DEMOMECHANICALFLOOR PLAN

MD-104


30780100

D. LUCHT

A. ALLMON

D. REIDER

07/13/16

A K F




T: 763.350.9324 F: 612.354.2162

ISSUE RECORD


29/1

626

/20

44/16

8"Ø/S-1200 CFM

22x10/R-1

12x10/S-250 CFM

10"Ø/S-1275 CFM

10"Ø/S-1275 CFM

12x8/E-275 CFM

22x10/E-1375 CFM22x10/E-1375 CFM

24x14/S-31500 CFM

18x12/S-31000 CFM 12"Ø/S-1

600 CFM

14"Ø/S-1850 CFM

22/16

29/1

629

/16

22/16

29/16

29/16

29/1

6

22/16

8ø

12x1

0

FSD FSD

18x1

0

10ø

10ø

10ø

14ø

14ø

14ø

14ø

14ø

14ø

5ø

20x10

12x1

020

x10

44/16

60x24

FSD

6ø

FSD

14ø

14ø

14ø

14ø

22x1

412

ø

14ø

44/16

VAV-A

FPVAV-A

FPVAV-A

FPVAV-A


FPVAV-A FPVAV-A

FPVAV-A

FPVAV-AFPVAV-B

VAV-B

STAIR AA-5

MECHSHAFT

4-B

OFFICE500

MECHSHAFT

4-Q

LOBBY501A

MENS502

JAN503

WOMENS504

STAIR BB-5

ELEC506

DATA505

ELEVLOBBY

507

S

S

S

S S S

S S

S

S

S S

SSD CO

2

SD CO

2

2 3 4 5 6 7 8 9 10 11 12 13

G.8

H

J

K

K.7

L

H.7

H.4

2 3 4 5 6 7 8 9 10 11 12 13

G.8

H

J

K

K.7

L

H.7

H.4

H.7

L

K.7

K

J

H.4

H

G.8

1312111098765432

CAP EXISTING

DRAWING NOTES


SHEET TITLE

SHEET NUMBER





PLO

TD

ATE:

PROJECT

PROJECT NUMBER

CONSULTANT

REGISTRATION

DRAWN BY

CHECKED BY

PROJECT MANAGER

DATE

FORREFERENCE

ONLY

PROJECT ADDRESS

7/15

/201

66:

35:5

9P

M


MD-105


30780100

D. LUCHT

A. ALLMON

D. REIDER

07/13/16

A K F




T: 763.350.9324 F: 612.354.2162

ISSUE RECORD


44/16

8"Ø/S-1200 CFM

22x10/R-1

12x10/S-250 CFM

10"Ø/S-1275 CFM

10"Ø/S-1275 CFM

12x8/E-275 CFM

18x12/S-31000 CFM

22x10/E-1375 CFM22x10/E-1375 CFM

24x14/S-31500 CFM

12"Ø/S-1600 CFM

14"Ø/S-1850 CFM

22/16

29/1

629

/16

22/16

29/16

29/16

29/1

6

22/16

8ø

12x1

0

FSD FSD

18x1

0

10ø

10ø

10ø

14ø

14ø

14ø

14ø

14ø

14ø

5ø

20x10

12x1

020

x10

44/16

FSD

60x24

FSD

6ø

22/16

FSD

14ø

14ø

14ø

29/1

629

/16

44/16

12ø

14ø

14ø

22x1

4

29/1

6

VAV-A

FPVAV-A

FPVAV-A

FPVAV-A


FPVAV-A FPVAV-A

FPVAV-A

FPVAV-AFPVAV-B

VAV-B

STAIR AA-6

MECHSHAFT

6-D

MECHSHAFT

5-I

LOBBY5-H

MENS5-C

WOMENS5-E

JAN5-D

ELEC5-F

DATA5-G

ELEVLOBBY

701C

STAIR BB-6

S

S

S

S S S

S S

S

S

S S

S

SD CO

2

SD CO

2

2 3 4 5 6 7 8 9 10 11 12 13

G.8

H

J

K

K.7

L

H.7

H.4

2 3 4 5 6 7 8 9 10 11 12 13

G.8

H

J

K

K.7

L

H.7

H.4

H.7

L

K.7

K

J

H.4

H

G.8

1312111098765432

DRAWING NOTES


SHEET TITLE

SHEET NUMBER





PLO

TD

ATE:

PROJECT

PROJECT NUMBER

CONSULTANT

REGISTRATION

DRAWN BY

CHECKED BY

PROJECT MANAGER

DATE

FORREFERENCE

ONLY

PROJECT ADDRESS

7/15

/201

66:

36:0

2P

M


MD-106


30780100

D. LUCHT

A. ALLMON

D. REIDER

07/13/16

A K F




T: 763.350.9324 F: 612.354.2162

ISSUE RECORD


42/20

8"Ø/S-1200 CFM

22x10/R-1

18x12/S-31000 CFM

12x10/S-250 CFM

10"Ø/S-1275 CFM

10"Ø/S-1275 CFM

12x8/E-275 CFM

22x10/E-1375 CFM22x10/E-1375 CFM

24x14/S-31500 CFM

12"Ø/S-1600 CFM

14"Ø/S-1850 CFM

22/16

29/1

629

/16

29/16 22/16

29/16

22/16

29/1

6

22/16

8ø

12x1

0

FSD FSD

72x20

60x24

30x2

0

FSD 60x24

18x1

0

10ø

10ø

14ø

30x2

0

14ø

14ø

14ø

14ø

14ø

14ø

20x10

12x1

020

x10

30x2

026

x20 FSD

FSD

30x2

4

6ø

29/1

629

/16

12ø

14ø

44/16

36x1

8

FSD

102x20

44/16

10ø

VAV-A

FPVAV-A

FPVAV-A

FPVAV-A

FPVAV-A FPVAV-A

FPVAV-A

FPVAV-A FPVAV-A

FPVAV-A

FPVAV-A

FPVAV-B

VAV-BMECHSHAFT

7-D

STAIR AA-7

MECHSHAFT

6-J

LOBBY701

MENS702

WOMENS704

JAN703

STAIR BB-7

ELEC706

DATA705

ELEVLOBBY

707

OFFICE600

S

S

S

S S

S

S S

S

S

S S

S

SD CO

2

SD CO

2

2 3 4 5 6 7 8 9 10 11 12 13

G.8

H

J

K

K.7

L

H.7

H.4

2 3 4 5 6 7 8 9 10 11 12 13

G.8

H

J

K

K.7

L

H.7

H.4

H.7

L

K.7

K

J

H.4

H

G.8

1312111098765432

DRAWING NOTES


SHEET TITLE

SHEET NUMBER





PLO

TD

ATE:

PROJECT

PROJECT NUMBER

CONSULTANT

REGISTRATION

DRAWN BY

CHECKED BY

PROJECT MANAGER

DATE

FORREFERENCE

ONLY

PROJECT ADDRESS

7/15

/201

66:

36:0

7P

M


MD-107


30780100

D. LUCHT

A. ALLMON

D. REIDER

07/13/16

A K F




T: 763.350.9324 F: 612.354.2162

ISSUE RECORD


UP

2 3 4 5 6 7 8 9 10 11 12 13

G.8

H

J

K

K.7

L

H.7

H.4

2 3 4 5 6 7 8 9 10 11 12 13

G.8

H

J

K

K.7

L

H.7

H.4

H.7

L

K.7

K

J

H.4

H

G.8

1312111098765432

FPVAV-1-4-03

FPVAV-1-4-04

FPVAV-1-4-07

FPVAV-1-4-08

FPVA

V-1-4-

09

FPVA

V-1-4-

06

FPVAV-1-4-13

FPVAV-1-4-01FPVAV-1-4-02


FPVA

V-2-4-

03

FPVAV-2-4-05

FPVAV-2-4-07

FPVA

V-2-4-

13

FPVA

V-2-4-

12

FPVAV-2-4-15

FPVAV-2-4-14

FPVA

V-1-4-

11

FPVAV-2-4-08

FPVAV-2-4-06

(E)46/24

(E)26

x10(E)

26/20

(E)26/20 (E)22/16 (E)22/16 (E)22/16 (E)22/16 (E)26/20

(E)26

/20

(E)46/24

(E)22/16(E)22/16

(E)24/46

(E)60x24

(E)22

x14

(E)14

ø(E)

12ø

(E)12

x10

(E)20

x10

(E)20x10

(E)20x10

(E)18

x10

(E)6ø

(E)10

ø

(E)14

ø

(E)24x10 (E)24x10 (E)18x10 (E)10ø

(E)10

ø

(E)16x10

(E)10

ø

(E)5ø

(E)8ø

(E)8ø

OPEN OFFICE417

OPEN OFFICE418

NOW419

OFFICE420

OFFICE421

OFFICE422

GENERAL COUNSEL411

TOILET409

MAIL ROOM423

PROPERTY SERVICES427

OFFICE425

OFFICE426

BADGING429

TOILET430

CONFERENCE428

CORRIDOR424

LOBBY407

ELEV 1,218

STAIR CC-4

RECEPTION431

CONFERENCE432

CONF.435

CONF.436

CONFERENCE433

CONFERENCE434

PREFUNCTION437

MULTI-PURPOSE BAY 3438



BREAK ROOM442

STORAGE441

FITNESS444

MULTI-PURPOSE BAY STORAGE433

JAN444A

MENS LOCKER445

WOMENS LOCKER446

ADA LOCKER448

ADA SHOWER447

NOW414

OFFICE415

OFFICE416 OFFICE

413

MEDIA CENTER412

STAIR AA-4 OFFICE

410

MENS402

JAN403

WOMENS404 DATA

405

ELEC406

ELEV. LOBBY408

LOBBY401

STAIRB-4

ELEV5

MECH SHAFT

CD-2240

CD-2240

CD-2230

CD-2230

LD-2225

LD-2225

LD-2225

LD-2225

LD-2340

LD-2340

CD-150

CD-1100

CD-2155

CD-2155

CD-2155

CD-2155

CD-2155

CD-1100

CD-1100

CD-1100

CD-1120

CD-1120

CD-1120

CD-1120

CD-1120

CD-1120

LD-2310

LD-2240

LD-2240

LD-2240

LD-2240

LD-2240

CD-1150

CD-1150

LD-2250

LD-2250

CD-1100

CD-2100

CD-1130

T

T

T

T

T

T

T

T

T

LD-2250

LD-2250

LD-2250

CD-175

CD-2120

CD-2120

FPVAV-2-4-17CD-1125

LD-2170

LD-2170

CD-1120

CD-1120

FPVAV-2-4-04

CD-2170

CD-2170

CD-2230

LD-2200

LD-2200

LD-2200

CD-2250

LD-2200

LD-2200

LD-2200

CD-1160

LD-2200

LD-2200

LD-2200

CD-2185

CD-2185

CD-2240

CD-2240

LD-2200

LD-2200

LD-2200

LD-2200

LD-2200

CD-2215

CD-2215

LD-2320

LD-2320

LD-2320

LD-2320

LD-2320

CD-2215

CD-2215

CD-2215

CD-2215

CD-2215

CD-2215

CD-2215

CD-2215

FPVA

V-2-4-

11

LD-2320

LD-2320

LD-2320

LD-2320

LD-2320

LD-2320

LD-2320

LD-2320

LD-2320

LD-2320

LD-2320

LD-2320

FPVAV-1-4-12

CD-1105

CD-1115CD-1

115

FPVAV-1-4-05

8ø

6ø

10ø

CD-2175

CD-2175

CD-160

CD-1135

CD-165

CD-3255

CD-3255 CD-3

255

FPVA

V-1-4-

10

CD-2175

CD-1100

CD-1100

S

S

S

S

S

S

S

S

S

S

S

SSS

S

S

S

S

S

S

CD-2200

CD-2200

CD-2200

CD-2200

LD-2320

LD-2320

LD-2320

LD-2320

LD-2320

CD-2200

CD-2200

CD-2200

LD-2300

LD-2300

LD-2300

LD-2300

LD-2300

8ø

LD-2340

LD-2340

LD-2340

LD-2340

8ø

EG-2100 EG-2

100

EG-2400 EG-2

400

EG-275

EG-1150

EG-1160

O2C

O2C O2C

O2C

O2C

O2C

O2C

O2C

O2CO2CO2C

O2C

O2C

O2C

O2C

O2C

O2C

CG-3

20x10 22x10

10x8

(E)22x10

CG-1

CG-1

CG-3

CG-3

T

CG-2

CD-3255CD-3

255

LD-2320

CG-2

O2C

CD-1105

CD-1100

16x1

6

20x1

0

14"ø

18x1

6

8ø

10ø

20x1212x12

14x1

4

12x12 12x8

10x1

0

14x14

14x14

FPVAV-2-4-09

14x14

14x1

4

FPVA

V-2-4-

16

18x1

414

x14

29/16

29/16

20x18

20x1

8

20x18

46/24

36/20

36/20

20x18

20x1

8

20x10

12x1

2

20x1

8

14ø 14ø

14ø

14ø 14ø

12ø

16x15

14x14 24x18

24x1

8

20x14

14x14

20x1

4

12x10 12x10

18x14

12x12

14x14

16x15

8ø

8ø

8ø

8ø

10x8

(E)14

ø

16x15

12ø

6ø

16x1

5

22/1636/20

8ø

14x1

4

14x14

18x1

4

18x14 14x14

18ø 15ø

8ø

8ø

16ø

14x1

4

42/20

42/20

CG-2CG-3CG-1

CG-1

CG-1

CG-1

CG-1 CG-1

CG-1

CG-2

CG-1

CG-1CG-2

CG-2

FPVAV-2-4-10

24x12

CG-3

CG-3

24x12 24x12

24x12

24x1224x12

CG-3

CG-3

CG-3CG-3

24x12

CG-3

CG-3

CG-3

CG-3

CG-1

CG-1

CG-1 CG-1

CG-1

CG-1

CG-1

10ø

26/20

42/24

DRAWING NOTES

1. FAN-POWERED VAV INLET DUCT SIZE SHALL BE SAME SIZE AS BOX INLET UNLESS NOTED OTHERWISE.2. SUPPLY DUCT DOWNSTREAM OF FAN-POWERED VAV SHALL BE SAME SIZE AS BOX OUTLET UNLESS NOTED OTHERWISE.3. RETURN DUCT TO FAN-POWERED VAV BOX SHALL BE SAME SIZE AS BOX INLET UNLESS NOTED OTHERWISE.4. MAINTAIN CLEARANCE OF 42'' INFRONT OF ALL 480V/3 PHASE FAN-POWERED VAV BOX ENCLOSURES.5. PROVIDE VOLUME DAMPERS OR OTHER APPROVED BALANCING DEVICES AT DUCT BRANCHES AND RUN OUTS, AND ATREGISTER GRILLE AND DIFFUSER NECKS IN SUPPLY, RETURN AND EXHAUST DUCTWORK WHETHER SHOWN OR NOT.

SHEET TITLE

SHEET NUMBER





PLO

TD

ATE:

PROJECT

PROJECT NUMBER

CONSULTANT

REGISTRATION

DRAWN BY

CHECKED BY

PROJECT MANAGER

DATE

FORREFERENCE

ONLY

PROJECT ADDRESS

7/15

/201

66:

35:3

4P

M

LEVEL 4 -MECHANICALFLOOR PLAN

M-104


30780100

D. LUCHT

A. ALLMON

D. REIDER

07/1316

A K F




T: 763.350.9324 F: 612.354.2162

ISSUE RECORD


2 3 4 5 6 7 8 9 10 11 12 13

G.8

H

J

K

K.7

L

H.7

H.4

2 3 4 5 6 7 8 9 10 11 12 13

G.8

H

J

K

K.7

L

H.7

H.4

H.7

L

K.7

K

J

H.4

H

G.8

1312111098765432

FPVA

V-1-5-

09

FPVAV-1-5-08

FPVA

V-1-5-

10

FPVA

V-1-5-

05

FPVAV-1-5-06

FPVA

V-1-5-

07

FPVAV-1-5-03

FPVAV-1-5-01

FPVAV-1-5-02

FPVAV-1-5-11

FPVA

V-2-5-

01

FPVA

V-2-5-

02

FPVA

V-2-5-

03

FPVAV-2-5-05

FPVAV-2-5-07

FPVAV-2-5-06

FPVAV-2-5-08

FPVA

V-2-5-

10

FPVAV-2-5-11

FPVA

V-1-5-

12 FPVAV-2-5-12

(E)22/16 (E)22/16

(E)48/20 (E)60x24

(E)22

x14

(E)12

ø(E)

14ø

(E)29/16 (E)29/16 (E)29

/16

(E)48/20

(E)29/16(E)29/16

(E)5ø

(E)8ø

(E)8ø

(E)22/16(E)22/16

(E)18

x10

(E)10ø

(E)6ø

(E)10

ø(E)

18x1

0

(E)20x10

(E)20

x10

(E)12

x10

(E)12x10

T

T

T

T

T

OPEN OFFICE530

OFFICE532

OFFICE533

OFFICE534 OFFICE

538

OFFICE537

OFFICE536

NOW531

OPEN OFFICE508

NOW535

OFFICE539

OFFICE540

OFFICE541

BREAK ROOM542

LARGE CONFERENCE543

OFFICE549

OFFICE550

OFFICE551

MEDIA CENTER548

NOW547

SMALL CONFERENCE546

CONFERENCE545

LARGE CONFERENCE544

OPEN OFFICE509

OFFICE514

OFFICE513

OFFICE512

OFFICE516

OFFICE517

OFFICE518

OPEN OFFICE529

TR&C STORAGE523

ENERGY SUPPLY STORAGE522

E&C STORAGE521

MEDIA CENTER520

LIBRARY / FILE STORAGE511

PERSONAL CARE510

PLOTTERS / STORAGE524

OFFICE528

OFFICE527

OFFICE526

OFFICE525

WOMENS504

MENS502

JAN503

ELEV LOBBY507

ELEC506

ELEV 5

MECH SHAFT

DATA505

LOBBY501A

NOW515

NOW519

STAIR AA-5

STAIR BB-5

S

S

S

S

S

S

S

S

SS

SS

S

S

S

S

S

O2C

O2C

O2C

O2C

O2C

O2C

FPVA

V-2-5-

04

FPVAV-1-5-04

CD-2205

CD-2205

LD-2260

LD-2260

LD-2260

LD-2260

LD-2260

LD-2250

LD-2300

LD-2300

LD-2300

LD-2300

CD-1100

CD-1100

CD-1100

CD-1100

CD-2200

CD-2200

CD-2200

CD-2200

LD-2250

CD-1100

CD-1100

CD-1100

CD-2230

CD-2230

LD-2220

LD-2220

LD-2220

LD-2220

CD-2220

CD-2220

CD-2220

CD-2220

CD-2200

CD-2200

CD-1100

CD-1100

CD-1100

LD-2300

LD-2300

LD-2300

LD-2300

CD-3300

CD-3300

CD-3300

CD-3300

LD-2300

CD-3260

LD-1150

LD-2300CD-2

200

LD-2250

LD-2250

CD-2200

CD-150

CD-1100

CD-1100

CD-2100

CD-175

CD-1150

CD-2245

CD-2245

LD-2300

LD-2300

LD-2340

CD-2250

CD-2250

LD-2340

LD-2340

LD-2340

LD-2200

CD-2200

CD-2200

CD-2200

CD-2200

CD-2200

LD-2180

CD-2250

CD-2250

LD-2200

LD-2200

LD-2200

LD-2200

LD-2200

CD-1100

CD-1100

CD-1100

CD-2250

CD-2250

CD-2250

CD-2250

LD-2200

LD-2200

CD-3225

CD-2225

LD-2280

LD-2280

LD-2280

LD-2280

LD-2280

CD-3300

CD-3300

CD-3300

CD-3300

LD-2300

LD-2300

LD-2300

CD-1100

CD-1100

CD-1100

CD-1100

CD-1100

CD-1100

CD-1100

LD-2290

LD-2290

LD-2290

LD-2290

LD-2290

CD-160

CD-1115

CD-2190

CD-2220

CD-2220

CD-2220

CD-2220

CD-2220

CD-1160

CD-1160

CD-160

FPVAV-2-5-09

CG-3

CG-3

CG-3

CG-3

CG-3

48/20

29/20

33/20 24/16 24/16

20x10

20x1

0

20x10 20x10

14ø 14ø

18x1

6

16x1

4

16x14

18x1

4

18x14

16x1

5

18x1

4

16x1

5

18x14

48/20

42/20

18ø16ø14x14

14x1

4 12x12 14x14

24x1

8

14ø

10x12

24x1

8

8x8

16x14

16ø

12ø

14ø

24x18

24x18

14x1

4

20x188ø

10ø

20x1

8

20x18

10ø

12ø

20x1

8

20x1

8

20x1820x18

20x1

8

24x1

8

24x18

20x1820x18

20x1

8

20x1820x18

24x18

24x1

8

16x1

5

14x1

214

x12

14ø

8ø6ø

36/20

39/20

10ø14ø

10ø

14ø

12ø

14ø

12ø

24x12

24x1

2

24x1

2

18ø

12ø

14ø 14ø 14ø

16x14

39/20

CD-150

16ø 14ø

14x1

4

14x1

4

12x1

2

CD-3345

CD-3345

CD-3345

CD-3345

CG-3

CG-3

CG-1

CG-1

CG-1

CG-1

CG-1

CG-1

CG-1

CG-1

CG-3

CG-1 CG-1 CG-1

CG-3

CG-3

CG-2

CG-1

CG-1

CG-1

CG-1

CG-3

CG-1

CG-1

CG-1

CG-1

26/20

CG-2

CG-1

CG-1

CG-1

CG-1CG-3

CG-1

CG-1

CG-1

CG-1CG-1

CG-1

CG-1

CG-1

CG-3

CG-1

CG-1

CG-1

CG-1

CG-1

CG-1

LD-2180

26/16

DRAWING NOTES


SHEET TITLE

SHEET NUMBER





PLO

TD

ATE:

PROJECT

PROJECT NUMBER

CONSULTANT

REGISTRATION

DRAWN BY

CHECKED BY

PROJECT MANAGER

DATE

FORREFERENCE

ONLY

PROJECT ADDRESS

7/15

/201

66:

35:3

9P

M


M-105


30780100

D. LUCHT

A. ALLMON

D. REIDER

07/13/16

A K F




T: 763.350.9324 F: 612.354.2162

ISSUE RECORD


2 3 4 5 6 7 8 9 10 11 12 13

G.8

H

J

K

K.7

L

H.7

H.4

2 3 4 5 6 7 8 9 10 11 12 13

G.8

H

J

K

K.7

L

H.7

H.4

H.7

L

K.7

K

J

H.4

H

G.8

1312111098765432

FPVAV-1-6-03

FPVA

V-1-6-

01

FPVA

V-1-6-

02

FPVAV-1-6-05

FPVAV-1-6-07

FPVAV-1-6-06

FPVAV-1-6-04

FPVAV-2-6-15

FPVAV-2-6-16

FPVA

V-2-6-

14

FPVAV-2-6-13

FPVAV-2-6-12

FPVAV-2-6-11

FPVAV-2-6-08

FPVAV-2-6-07

FPVAV-2-6-06

FPVAV-2-6-03 FPVAV-2-6-04FPVAV-2-6-01 FPVAV-2-6-02

FPVAV-1-6-08

(E)22/16(E)22/16(E)29/16

(E)29

/16

44/16 (E)48/20

(E)22/16

(E)60x24

10ø

(E)18

x10

(E)10ø

(E)6ø

(E)10

ø

(E)20x10

(E)20

x10

(E)12

x10

(E)22/16 (E)22/16 (E)29/16

29/16

(E)48/20

(E)29

/16

(E)29/16(E)22/16 (E)29/16(E)22/16

(E)14

ø(E)

22x1

4(E)

12ø

(E)5ø

(E)8ø

(E)8ø

(E)60x24

(E)12x10

CONFERENCE634

CONFERENCE635

CONFERENCE636OFFICE

639

NOW638

MEDIA CENTER637

STAIR BB-6

LOBBY601A

OPEN OFFICE608

NOW645

OFFICE644

OFFICE643

OFFICE642

OFFICE616

OFFICE615

OFFICE614

OFFICE618

OFFICE619

OFFICE620

OPEN OFFICE622

OFFICE624

OFFICE625

OFFICE626

OFFICE630

OFFICE629

OFFICE628

STAIR AA-6

TOLIET609

PLOTTER610

EQUIPMENT STORAGE612

OFFICE611

OFFICE613

MEDIA CENTER623

WOMEN'S604

NOW627

NOW631

MEN'S602

PLOTTER603

ELEV LOBBY607

ELEC606

DATA605

ENGINEERING LAB641

BREAK ROOM633

NOW621

NOW617

T

T

T

T

T

S

S

S

S

S

S

S S

S S

S

S

S

SS

S

S

EG-1140

O2C

O2C

O2C

O2C

FPVAV-2-6-09

FPVAV-2-6-10

S

LD-2285

LD-2270

LD-2270

LD-2270

LD-2270

LD-2270

CD-2240

CD-2240

LD-2300

LD-2300

LD-2300

LD-2300

LD-2300

LD-2200

LD-2260

LD-2260

LD-2260

LD-2260

LD-2260

LD-2260

LD-2260

CD-1100

CD-1100

CD-1100

CD-1100

CD-1100

CD-1100

LD-2200

12x8 14x14

18x12

24x18

24x1

8

10ø

24x1

8

24x18

12x1212ø

14x1

4

12ø12ø

10ø

14ø

12ø

16ø

12ø

CD-2240

CD-2240

LD-2300

LD-2300

LD-2300

14ø 14ø

10ø

CD-2220

CD-2220

CD-2220

CD-2220

CD-2205

CD-2205

CD-2205

CD-2205

14x14

8ø

CD-1100

CD-1100

CD-1100

LD-2200

CD-2240

CD-2240

LD-2300

LD-2300

LD-2300

LD-2300

LD-2300

LD-2300

CD-3380

CD-3380

LD-2300

LD-2300CD-2

235

CD-2235

CD-2235

CD-2275

CD-3275

CD-3275

12x1

2

14ø 12ø

18x1

4

14ø

12ø

20x1

4

LD-2245

LD-2245

CD-2245

CD-150

CD-165

CD-1100

LD-2300

CD-2185

12ø 10ø

14x1

4

12ø

15ø

14ø15

ø

12ø

14x14

16ø

14ø

12ø

12x8

12ø 12

ø

LD-120014x14

LD-2300

CD-2165

CD-2165

LD-2300

LD-2300

LD-2300

FPVAV-2-6-05 LD-2300CD-3

280CD-3280

CD-3280

CD-3280

LD-2280

LD-2280

LD-2280

10ø12ø

14x1

410

ø 10ø

12ø

20x18 20x18

CD-2215

CD-2215

CD-2215

CD-2215

24x1

816

ø

16x14

8ø

14x1

4

12ø12ø

12ø

LD-2280

LD-2280

LD-2280

LD-2245

CD-1115 CD-2

210CD-2210

CD-2210

CD-2210

CD-2210

CD-1100

CD-1100

CD-1100

CD-170

CD-1115

CD-1100

CD-1100

6ø12

x10

LD-2245

LD-2280

LD-2280

LD-2280

CD-1115

CD-2100

CD-1100

CD-1100

CG-1

CG-3

CG-3

CG-3

S

CD-2205

CD-2205

CD-2205

CD-2205

CD-2205

CD-195

CD-3265

CD-3265

CD-3265

CD-3265

CD-1125

CD-1125

CD-1125

CD-1125

CD-1125

CD-1125

CD-1125

CD-1125

CD-2205

(E)18

x14

(E)18x18(E)24x18

12ø8ø

14x1

4

14x14

20x18

16x1

5

10ø8ø

8ø

8ø8ø

24x1

8

12ø

10ø

6ø10ø

10ø

6ø

12ø 16ø

8ø 8ø 8ø

12x12 12x12

8ø

33/20

33/20 33/208ø

48/20

CG-1

CG-1

CG-1

CG-1

CG-1

CG-1

CG-1

CG-1

CG-3

CG-3

CG-3

CG-1

CG-1

CG-1

CG-1

CG-2

CG-2

CG-2

CG-3 CG-3

CG-3

CG-3

CG-3

CG-1

CG-1

CG-1

CG-1

CG-1

CG-1

CG-1

CG-1

CG-1

CG-1

CG-1

CG-1

CG-3

CG-3

CG-3

CG-1 CG-1 CG-1

CG-1

CG-1

LD-2200

LD-2200

LD-2200

42/20

DRAWING NOTES


SHEET TITLE

SHEET NUMBER





PLO

TD

ATE:

PROJECT

PROJECT NUMBER

CONSULTANT

REGISTRATION

DRAWN BY

CHECKED BY

PROJECT MANAGER

DATE

FORREFERENCE

ONLY

PROJECT ADDRESS

7/15

/201

66:

35:4

3P

M


M-106


30780100

D. LUCHT

A. ALLMON

D. REIDER

07/13/16

A K F




T: 763.350.9324 F: 612.354.2162

ISSUE RECORD


2 3 4 5 6 7 8 9 10 11 12 13

G.8

H

J

K

K.7

L

H.7

H.4

2 3 4 5 6 7 8 9 10 11 12 13

G.8

H

J

K

K.7

L

H.7

H.4

H.7

L

K.7

K

J

H.4

H

G.8

1312111098765432

FPVAV-1-7-10

FPVAV-1-7-07

FPVAV-1-7-08

FPVAV-1-7-11

FPVAV-1-7-09

FPVAV-1-7-05

FPVAV-1-7-06

FPVA

V-1-7-

04

FPVA

V-1-7-

01


FPVA

V-2-7-

17

FPVA

V-2-7-

16

FPVA

V-2-7-

15

FPVAV-2-7-14

FPVA

V-2-7-

11

FPVAV-2-7-12

FPVA

V-2-7-

13

FPVA

V-2-7-

08

FPVA

V-2-7-

09

FPVA

V-2-7-

07

FPVA

V-2-7-

02

FPVAV-2-7-03

FPVAV-2-7-04

(E)22/16(E)22/16(E)29/16

(E)29

/16

(E)48/20

(E)29

/16

(E)29/16 (E)22/16 (E)22/16

(E)30

x20

(E)30

x20

(E)48

x12

(E)22/16

(E)10

ø(E)

18x1

0(E)

10ø

(E)6ø

(E)10ø(E)20x10

(E)20

x10

(E)12

x10

(E)5ø

(E)8ø

(E)8ø

(E)22/16

(E)30

x24

(E)48/20

(E)36

x18

22/16(E)22/16

(E)14

ø(E)

22x1

4(E)

12ø

OPEN SPACE727

OFFICE720

OFFICE721

OFFICE722

OFFICE717

OFFICE718

OFFICE719

MEDIA CENTER716

PRINT ROOM715

STAIR AA-7

OFFICE711

REGULATORY712

OFFICE714

OFFICE713

PERSONAL CARE710

JAN703

MENS702

WOMENS704

DATA705

ELEC706

ELEV LOBBY707

STAIR BB-7

LOBBY701

MEDIA CENTER755

OFFICE754

OFFICE753

EXECUTIVE SUITE736

OFFICE751

OFFICE750

NOW749

OFFICE748

CONFERENCE747

OFFICE746

OFFICE745

OFFICE744

NOW723

OFFICE724

OFFICE725

OFFICE726

OPEN OFFICE709

OFFICE728

OFFICE729

OFFICE730

CONFERENCE732

BREAK ROOM731

BOARD ROOM734

CONFERENCE733

RECEPTION735

OFFICE737

OFFICE738

OFFICE739

CONFERENCE740

OFFICE741

OFFICE742

HOTEL743

T T

T

T

T

T

T

T

T

T

T

T

S

S

S

S

S

S

S

S

SS

S

SS

S

O2C

O2C

O2C

O2CO2C

O2C

FPVAV-2-7-01

FPVAV-2-7-05

FPVAV-2-7-06

S

CG-3

CG-3

O2C

O2C

LD-2240

LD-2240

LD-2240

LD-2240

LD-2240

CD-2225

CD-2225

CD-2225

24x1

824

x18

24x18

LD-2130

CD-1100

CD-1100

CD-1100

CD-2225

CD-2225

CD-2225

24x18

10x1

010

x10

CD-1100

CD-2100

24x18 24x18

24x1

8

LD-2245

LD-2245

LD-2245

LD-2245

LD-2245

CD-2200

CD-2200

CD-2200

24x18

24x1

8

10x1

0

CD-1100

CD-1100

CD-1100

CD-1100

CD-165

CD-1100

CD-1100

CD-1100

CD-1125

CD-1125

8ø6ø

16x15

14ø

12ø

LD-2230

LD-2230

LD-2230

CD-2240

CD-2240

CD-2240

CD-2150

8ø6ø

LD-2240

LD-2240

LD-2240

24x18

CD-3270

CD-3270

LD-2280

16x15

CD-1100

CD-2240

16x1

5

LD-2300

LD-2300

LD-2300

CD-3270

CD-3270

24x18

LD-2250

LD-2250

CD-2200

LD-2325

LD-2325

LD-2325

24x18

LD-2400

LD-2400

LD-2285

12ø

LD-2265

LD-2265

LD-2265

CD-3260

LD-2335

CD-2200

CD-175

CD-1100

CD-1100

CD-1100

CD-1100

CD-1100

LD-2220

CD-3350

CD-3350

LD-2300

LD-2300

LD-2300

CD-3325

CD-3300

CD-3300

CD-2235

CD-2235

CD-2235

LD-2300

LD-2300

LD-2300

CD-3325

LD-2325

LD-2325

LD-2325

24x18

20x1

8

12x13 16x1

5

CD-1140

CD-1140

CD-3320

CD-3320

LD-2320

LD-2320

LD-2320

CD-2230

CD-2230

CD-2230

CD-2225

CD-2225

CD-2225

CD-2225

CD-150

CD-1100

CD-1100

CD-3325

CD-3325

CD-2100

CD-2100

CD-2100

LD-2325

CD-2325

LD-2325

CD-3325

LD-2325

LD-2325

CD-3325

CD-1145

CD-1145

CD-1145

CD-1145

CD-1145

CD-1145

CD-1145

CD-1145

S

20x1

8

20x1

8

24x1

8

24x18

20x18

24x18

24x1

8

20x1

8

20x18

24x1

8

16x15

24x1

8

16x1

5

18x1

2

16x1

5

20x18

20x18

24x1

820

x18

24x18

20x18

16x1

5

16x15

24x1

8

10x10

24x18

16x10 16x10

12ø

14ø

12ø

12ø

12ø 6ø

12ø

6ø

10ø

8ø10ø

12ø

10ø

12ø

8ø

16ø

10ø

14ø

24x1

814

ø

12ø

8ø

6ø

12ø

14ø

12x12

12ø

42/20

42/20

14ø

48/20

33/20

33/20

42/20

33/20

16ø

(E)14ø

14ø

CG-1

CG-3CG-1

CG-1

CG-1

CG-1

CG-1

CG-1

CG-3

CG-3

CG-3

CG-3

CG-1

CG-1

CG-3

LD-2220

CG-2

CG-1

CG-1

CG-1

CG-1

CG-1

CG-1

CG-1

CG-1

CG-1

CG-1

CG-1

CG-1

CG-1

CG-1

CG-1

CG-2 CG-3

CG-2

CG-3

CG-3

CG-3

CG-3

CG-3

CG-324x12

24x12

24x12

CG-1

CG-1

CG-1

CG-1

CG-1

CG-1

CG-1CG-1

CG-1

CG-1CG-1

CG-1 CG-1

DRAWING NOTES


SHEET TITLE

SHEET NUMBER





PLO

TD

ATE:

PROJECT

PROJECT NUMBER

CONSULTANT

REGISTRATION

DRAWN BY

CHECKED BY

PROJECT MANAGER

DATE

FORREFERENCE

ONLY

PROJECT ADDRESS

7/15

/201

66:

35:4

7P

M


M-107


30780100

D. LUCHT

A. ALLMON

D. REIDER

07/13/16

A K F




T: 763.350.9324 F: 612.354.2162

ISSUE RECORD


SHEET TITLE

SHEET NUMBER





PLO

TD

ATE:

PROJECT

PROJECT NUMBER

CONSULTANT

REGISTRATION

DRAWN BY

CHECKED BY

PROJECT MANAGER

DATE

FORREFERENCE

ONLY

PROJECT ADDRESS

7/15

/201

66:

35:4

9P

M

MECHANICALSCHEDULES

M-200


30780100

D. LUCHT

A. ALLMON

D. REIDER

07/13/16

A K F




T: 763.350.9324 F: 612.354.2162

ISSUE RECORD


GRILLES, REGISTERS, AND DIFFUSERS SCHEDULEwtwt REPRESENTATIVE MODEL DUTY FACE SIZE NECK SIZE MOUNTING STYLE MATERIAL REMARKSCD-1 TITUS OMNI SUPPLY 24"x24"CD-2 TITUS OMNI SUPPLY 24"x24" LAY-IN STEELCD-3 TITUS OMNI SUPPLY 24"x24"CG-1 TITUS 50F RETURN 24"x6" LAY-IN ALUMINUMCG-2 TITUS 50F RETURN 24"x12" LAY-IN ALUMINUMCG-3 TITUS 50F RETURN 24"x24" LAY-IN ALUMINUMEG-1 TITUS 350FLEG-2 TITUS 350FLEG-3 TITUS 50F EXHAUSTLD-1 SUPPLYLD-2 SUPPLY

6"ø8"ø10"ø

LAY-IN

LAY-IN

STEEL

STEEL

RETURN LAY-INEXHAUST

8"x6"12"x10"

2"x5"4"x5"

STEELALUMINUM

STEELSTEEL

LAY-INLAY-INLAY-INLAY-IN

STEEL

TITUS TBDI-30 (2-1" SLOTS)TITUS TBDI-30 (3-1" SLOTS)

24"x12"8"ø10"ø

1.2.

1. BOTH SLOTS AIMED FOR VERTICAL THROW2. TWO SLOTS AIMED FOR VERTICAL THROW. INTERIOR SLOT AIMED FOR HORIZONTAL THROW .

SHEET TITLE

SHEET NUMBER





PLO

TD

ATE:

PROJECT

PROJECT NUMBER

CONSULTANT

REGISTRATION

DRAWN BY

CHECKED BY

PROJECT MANAGER

DATE

FORREFERENCE

ONLY

PROJECT ADDRESS

7/15

/201

66:

35:5

1P

M

MECHANICALSCHEDULES

M-201


30780100

D. LUCHT

A. ALLMON

D. REIDER

07/13/16

A K F




T: 763.350.9324 F: 612.354.2162

ISSUE RECORD


VANED ELBOW

2-1/4"

3-1/2"

RUNNER

TURNING VANE

2-1/4"R

4-1/2"R

LOCKING LUG

NOTES:

1. LOCKING LUGS INTERNAL WITH VANE.2. MAXIMUM UNSUPPORTED VANE LENGTH 48".3. RUNNER - BOLTED OR RIVETED TO ELBOW.4. VANES SHALL BE SECURELY FASTENED TO RUNNER.5. VANES AND RUNNER - SAME GAUGE AS ELBOW.6. FOR DUCTS WITH EQUAL INLET AND OUTLET DIMENSIONS.

NOTES:

1. NOT TO BE USED AS A SUBSTITUTE FOR AN ELBOW.

SUPPLY

RETURN/EXHAUSTAIRFLOW

AIRFLOW

MAIN DUCT

BRANCH DUCT

0.25 x W2, 4" MINIMUM

VOLUME DAMPER WITHLOCKING TYPE INDICATOR.QUADRANT AND SADDLE TOCLEAR INSULATION

CLINCH COLLAR

W1

45°

W2

AIRFL

OW

MAIN DUCT

DUCT TOTROFFER ORDIFFUSER

SHEET METAL ASREQUIRED

MANUAL VOLUME DAMPERWITH LOCKING TYPEINDICATOR QUADRANT

1.5D

D

DIFFUSER

SIDE CONNECTION

CEILING

MAXMIUM 5 FT LENGTH FLEXIBLEDUCT FULLY EXTENDED

ROUND DUCT CONNECTORACOUSTIC LINING

D

DIFFUSER NECK SIZE

6" MIN

TOP CONNECTION

ROUND DUCT ADAPTORFOR RECTANGULARDIFFUSER

MAXMIUM 5 FT LENGTHFLEXIBLE DUCT FULLYEXTENDED

SEE NOTE 1

SEE NOTE 2

CEILING

DIFFUSER

THERMAL INSULATION

R=D

D

2-3/4" MIN

D MINIMUM

NOTES:

1. PROVIDE ELBOW SUPPORTS AND DUCTSUPPORT STRAPS, FLEX FLOW OREQUAL.

PLAN VIEW

MOUNT CONTROL PANEL WITHADEQUATE SERVICE ACCESS

1" ACOUSTICAL LINING MIN.15'-0" DOWNSTREAM SEESPECS AND PLANS FORFURTHER REQUIREMENTS

FLEXIBLE CONNECTION (TYP)

ACOUSTICALLY LINED INDUCEDAIR ATTENUATOR. PROVIDE AMINIMUM OF 2 ELBOWS.

FAN POWEREDTERMINAL UNITSUPPLY AIR

TRANSITION TO OVAL ONLARGER UNITS AS REQUIRED

PRIMARY AIR INLETSTRAIGHT ROUND DUCTLENGTH 2 DIAMETERS(MINIMUM 3'-0")

CONICAL (BELL MOUTH)CONNECTION

INDUCED AIR INLET

SUPPLYMAIN

NOTES:

1. ALL UNITS TO BE PROVIDED WITH VIBRATION ISOLATORS AND TO BE SUPPORTED FROMSLAB OR STRUCTURAL STEEL.

2. INSTALL TERMINAL UNITS CLEAR OF LIGHTS FOR ACCESS.3. SEE HVAC EQUIPMENT HANGING DETAIL FOR SUPPORT.

D

CONTROL PANEL IS 480/3 AND REQUIRES A MINIMUM OF 42" CLEAR IN FRONT (D). IF TWO CONTROL PANELSSHARE THE SAME SERVICE AREA, THE MINIMUM DISTANCE (D) SHALL BE 48" BETWEEN ENCLOSURES.

NOTES:

1. SEE PLANS FOR FD, SD AND F/SD LOCATIONS.2. SEE PLANS FOR TRANSFER SIZES.3. TRANSFERS SHOWN ON PLAN ARE DIAGRAMMATIC. INSTALL PER

DETAIL.4. DUCT DIMENSIONS ON DRAWINGS ARE INSIDE CLEAR DIMENSIONS.

PARTITIONSEAL ALL AROUND1" ACOUSTICAL LINING

PLAN VIEWELEVATION VIEW

24" MINIMUM

8" MINIMUM

CEILINGGRILLE

CEILINGPLENUM

1" ACOUSTICAL LINING

ELEVATION VIEW

PLAN VIEW

NOTES:



CEILINGW

W

6" MINIMUM

1/2xW OR 6" MINIMUM12" MINUMUM

EQUAL TO GRILLE WIDTH

MINIMUM

CEILING

CEILINGGRILLE

CEILINGPLENUM

1" ACOUSTICAL LINING

SEAL ALL AROUND

PARTITION

ELEVATION VIEW PLAN VIEW

2xW OR 30"

NOTES:



8" MINIMUM

DUCT SIZE TO MATCH CEILING GRILLE DIMENSIONS

INSULATED FLEXCONN 5' MAXLENGTH

USE NYLON TY-WRAPTIGHTENED WITH TY-WRAPTOOL OR REUSABLE SS DRAWBAND

INTERNALLY INSULATED PLENUMWITH INTEGRAL (NOT FIELDFABRICATED) LINEAR DIFFUSERBY DIFFUSER MANUFACTURER

ADJUSTABLE VANES

18" MAX TOGLAZING OR WALLFACE

CEILING

NOTES:

1. OFFSETS WITH FLEX DUCT SHALL NOT EXCEED 30° AND SHALLBE GRADUAL. OFFSETS IN EXCESS OF 30° SHALL BE HARDDUCTED.

2. FLEX DUCT SHALL NOT HAVE MORE THAN 1/2" SAG/FT.3. FOR PERIMETER DIFFUSERS LOCATE DISTANCE FROM OUTSIDE

WALL SHOWN ON ARCH PLANS.4. CONNECTION TO MAIN DUCT SHALL BE HARD DUCT TRANSITION

AND VOLUME DAMPERSHEET TITLE

SHEET NUMBER





PLO

TD

ATE:

PROJECT

PROJECT NUMBER

CONSULTANT

REGISTRATION

DRAWN BY

CHECKED BY

PROJECT MANAGER

DATE

FORREFERENCE

ONLY

PROJECT ADDRESS

7/15

/201

66:

35:5

2P

M

MECHANICALDETAILS

M-300


30780100

D. LUCHT

A. ALLMON

D. REIDER

07/13/16

A K F




T: 763.350.9324 F: 612.354.2162

ISSUE RECORD


SCALE: NTS1DOUBLE THICKNESS TURNING VANES FOR SQUAREELBOWS

SCALE: NTS2 RECTANGULAR DUCT TAP WITH VOLUME DAMPERSCALE: NTS3 CIRCULAR BRANCH CONNECTION TO SINGLE OUTLET

SCALE: NTS4 DIFFUSER CONNECTION - FLEX DUCT

SCALE: NTS6 FAN POWERED TERMINAL UNITSCALE: NTS5 TYPICAL AIR TRANSFER DUCT

SCALE: NTS7 SOUND BOOT WITH GRILLESCALE: NTS8 TRANSFER DUCT WITH GRILLE

SCALE: NTS9 LINEAR DIFFUSER CONNECTION

Documents

ISSUE RECORD