Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
ISSUE 4 / 2015
www.combijet.com
Combijet is a manufacturer and supplier of a wide rangeof industrial cleaning and high pressure water blastingequipment.
Being a member of Demetriades Group ofCompanies, we are in a position to utilise the expertiseand the engineering background, in order to offerproducts and support of the highest standards.
The product serves a wide variety of applications, whileoffering the highest standards and equipment to fitevery industry, whether it is marine, offshore,construction or industrial sectors.
Our range covers a wide variety of heavy duty products,Including Hot and Cold pressure washers (from 150 barup to 250 bar), Heavy Duty Jet Cleaners (from 350 barup to 500 bar) and High Pressure Water Blasters (from800 bar up to 3300 bar).
Reliability is established through the high build qualityand components, pronounced for their long lastingperformance. Utilizing our expertise and know how, wecan meet any design specifications for bespoke ortailor-made solutions.
A comprehensive range of accessories is also availableto match the product range and meet individualapplications or needs.
As a highlight of our products, we offer the innovativeCombijet Robot, suitable for cleaning and blasting steelsurfaces.
Additionally we offer worldwide hydro blasting services,were our specialized equipment and experience teamstravel to carry out projects on site.
HEAVY DUTY HIGH PRESSURE WATERBLASTING EQUIPMENT
Combijet High Pressure Water Blasters offer you high performance and design, which is optimized for heavy duty use and gives youthe opportunity to solve a range of blasting tasks. Water blasting, apart for being an environmental friendly blasting method has also avery good cleaning effect. Even more, the use of pressure washing technology allows works to be done in areas where otherconventional blasting methods would be impossible to operate, eg terminals, refineries, urban areas.
Τhe High Pressure Water Blasting is ideal for removing old coatings and rust, but also eliminates the deeply embedded crystallisedsalt. Τhe latter results in the remarkable reduction of the chlorides levels on the surface, which leads to higher adhesion and expansionof the lifetime of coating. On projects where large amounts of abrasives must be collected and disposed, the most preferable method isdefinitely the water blasting. Many studies have proven that surfaces, which have been water blasted are much cleaner than thoseblasted with the use of traditional solid abrasive methods.
Today, most major coating manufacturers have recognised the important advantages of pressure jetting and they managed to developa range of surface- tolerant coatings. These coatings are specially designed to adhere to surfaces that have been water blasted. Waterblasting is surely the most dominant blasting method that all will use in the near future.
Combijet presence at major International Exhibitions
YOUR GLOBAL SUPPLIER FOR YOURPROFESSIONAL AND INDUSTRIAL NEEDS
• MARINTEC CHINA December 1 - 4, 2015 Shanghai, China
• THE BIG 5 November 23 - 26, 2015 Dubai, UAE
• PROJECT QATAR May 4 – 7, 2015 Doha, Qatar
• THE BIG 5 November 17 – 20, 2014 Dubai, UAE
• SMM 2014 9- 12 September 2014, Hamburg ,Germany
• POSIDONIA 2014 2-6 June 2014, Athens Greece.
• EUROPORT 2013 November 5-8, 2013, Ahoy Rotterdam
• MARINE MAINTENANCE WORLD EXPO 2013September 10 -12, 2013, Brussels Belgium
• BAUMA 2013 April 15 -21, 2013, Munich, Germany
• MARINE TECH KOREA 2012November 13-16, 2012, Korea
• SMM 2012 September 4 -7, 2012, Hamburg, Germany
• POSIDONIA 2012 June 4 -8, 2012, Athens, Greece
Combijet can be used for harsh applications in an immense variety ofmarkets. Few of them are listed below: Aerospace and DefenceRemoval of coatings from airplanes, rockets and rocket solidfuel, as well as explosives washout and reconditioning.
Aluminium Smelting Plants• Removal of bauxite build-up in pipes and tubes.• Removal of excess build-up in cells or smelting reactors.
Automotive/Highway• Removal of paint and solder from booths, machinery, grating
and conveyors. • Cleaning of grease, vegetation, mud, tar, cement or asphalt on
vehicles and machinery. • Remove centre highway striping and
markings.
Chemical Plants• Cleaning chemical deposits from boilers, tanks, valves,
evaporators, heat exchangers, tune bundles, pipe, vessels and chemical reactors.
Marine• Removal of marine growth, barnacles, loose paint and rust on
ship hulls, docks, ballasts, platforms, storage tanks and boilers. • Underwater cleaning of pipe and drilling platforms.
Oilfield / Pipe Industry• Paraffin and crude residues on platforms and storage tanks. • Removal of drilling mud and cement from drilling pipes. • Surface preparation for repainting. Hydrostatic testing of
hoses, pipes and fittings. • Valve actuation and accumulator pressurization. • Removal of rust and varnish from industrial pipes prior to
recoating and removal of dope and oil from pipe threads for inspection.
Pulp / PaperCleaning of grease, oil, pitch dirt and wood pulp from heatexchangers, tubes, foundries, press sections, screens and rollsof paper machines.
RailroadCleaning of gypsum, potash, cement and lime in railroad hoppercars, removal of grease, dirt and deposits in tanker trucks andtank cars.
Construction & Mining• Cleaning of asphalt, dirt, concrete, mortar, tar, grease, mastic
and clay on vehicles, mixer trucks and machinery.• Pre-maintenance cleaning of dumpers, drag lines,
underground haulage lines and shasts; aids in the recovery of ore.
TECHNICAL DATA / MODEL JE60-35050hz VERSION
Working pressure bar/PSI 350 / 5075
Flow rate lpm/gpm 18 / 4.7
Voltage / phase volt/ph 380-400 / 3
60hz VERSION
Working pressure bar/PSI 350 / 5075
Flow rate lpm/gpm 22 / 5.8
Voltage / phase volt/ph 400-440 / 3
General data
Electrical motor hp/kW 14.75/11
Amperage amp 14.43
Dimensions LxWxH (cm) 100 x 66 x 92
Weight kg 140
Stantard Equipment- 10m High Pressure Rubber Hose - 5 m Oil Resistant Electrical Cable- Trigger Operated Gun c/w Lance - Fan Jet Nozzle- One set of Operator & Spares Manual
Standard Features- Listing Eye- Solid Wheels- Brake System- Unloader Valve
Chassis & Frame Paint Epoxy Paint System 2 Component:- Primer – Interzinc 22 / Inorganic Zinc
Rich Silicate- Intermediate coat - Intergard 400 / Epoxy- Top coat - Interthane 990 / Polyurethane
The machine is so versatile that it can be used inmany industries, such as:Construction, Chemical Processing, Cement Plants,Marine, Breweries, Aluminum Plants, Mining,Petrochemicals, Railroad, Surface Preparation, etc.
JE 60-350
HEAVY DUTY ELECTRICDRIVEN HIGH PRESSUREWATER JET CLEANERS
JE60 SERIES from 350 up to 500 bar
500 bar compact unit, with a ManualPressure Regulator Valve as a standard.CLEANING OF: • Storage Tanks • Oil platforms• Pipes• Decks• Cargo holds• Containers and Drums
REMOVAL OF:• Hard dirt• Grease oil• Embedded crystallized salt• Barnacles and marine growth• Soil and Clay• Rust flakes and corroded paint
COMPACT HIGHPRESSURE JET CLEANERJE60-500
NEW
MODEL
TECHNICAL DATA / MODEL JE60-500 50hz VERSION:
Working pressure bar/PSI 500 / 7250
Flow rate lpm/gpm 16 / 4.2
Voltage / phase volt/ph 380-400 / 3
60hz VERSION:
Working pressure bar/PSI 500 / 7250
Flow rate lpm/gpm 19 / 5.0
Voltage / phase volt/ph 400-440 / 3
General data
Electrical motor hp/kW 20 / 15
Amperage amp 21.65 A
Dimensions LxWxH (cm) 100 x 63 x 93
Weight kg 245
50Hz 60Hz
50Hz 60Hz
Stantard Equipment- Electric Cable -10 m- High Pressure Hose – 20m- Trigger Operated Gun with Lance- Fan Jet Nozzle
- Manual Pressure Regulator (for pressure adjustment)
- Thermo – Mechanical Valve (for overheating protection)
Optional Accessories- Rotating Nozzles- Personal Protective Equipment
HEAVY DUTY ELECTRICDRIVEN HIGH PRESSUREWATER BLASTERS
JE80 SERIES from 800 up to 3300 bar
TECHNICAL DATA / MODEL JE80-800 JE80-1000 JE80-1300 JE80-1500 JE80-177050hz VERSION
Working pressure bar/PSI 800 / 11600 1000 / 14503 1300 / 18854 1500 / 21750 1770 / 25671
Flow rate lpm/gpm 19 / 3.69 19 / 3.69 12 / 3.17 12.5 / 3.3 10 / 2.64
Voltage / phase volt/ph 380-400 / 3 380-400 / 3 380-400 / 3 380-400 / 3 380-400 / 3
60hz VERSION
Working pressure bar/PSI 800 / 11600 1000 / 14503 1300 / 18854 1500 / 21750 1770 / 25671
Flow rate lpm/gpm 17 / 4.49 17 / 4.49 15 / 3.96 13 / 3.43 13 / 3.43
Voltage / phase volt/ph 380-440 / 3 380-440 / 3 380-440 / 3 380-440 / 3 380-440 / 3
General Data
Electrical motor hp/kW 40.23 / 30 40 / 30 49.59 / 37 49.59 / 37 60.32 / 45
Dimensions LxWxH (mm) 1700x980x1200 1700x980x1200 1700x980x1200 1700x980x1200 1900x1000x1200
Weight kg 850 850 950 950 1100
Chassis & Frame PaintEpoxy Paint System 2 Component-Primer – Interzinc 22 / Inorganic Zinc Rich Silicate
-Intermediate coat - Intergard 400 / Epoxy-Top coat - Interthane 990 / Polyurethane
Optional Accessories- Ultra High Pressure Hoses- Hose Connectors- Hose Reel- Foot Valve
- Rotating Nozzles- Protective Clothing- Repair Kits
Stantard Equipment- Ultra High Pressure Hose – 20m- Oil Resistant Electrical Cable – 5 m- Dump Gun with Lance- Fan Jet Nozzle- One Set of Operator & Spares Manual
Standard Features- Galvanised Base and Frame- Stainless Steel SS316 Electric Box- Stainless Steel SS316 Water Tank- Listing Eye- Pneumatic Wheels (on mobile models)
- Brake System (on mobile models)- Bust Safety Valve- Stainless Steel Two - Stage Filters
Mobile StationaryTECHNICAL DATA / MODEL JE80-2100/13 JE80-2300 JE80-2500/13 JE80-2500/21 JE80-2500/2750hz VERSION
Working pressure bar/PSI 2100 / 30457 2300 / 33358 2500/ 2500/ 2500/
Flow rate lpm/gpm 10 / 2.64 10 / 2.64 13/ 21/ 27/
Voltage / phase volt/ph 380-400 / 3 380-400 / 3 380-400 / 3 380-400 / 3 380-400 / 3
60hz VERSION
Working pressure bar/PSI 2100 / 30457 2300 / 30457 2500 / 2500 / 2500 /
Flow rate lpm/gpm 13 / 3.43 13 / 3.43 13 / 3.43 21 / 27 /
Voltage / phase volt/ph 380-440 / 3 380-440 / 3 380-440 / 3 380-440 / 3 380-440 / 3
General Data
Electrical motor hp/kW 73.72 / 55 80.42 / 60 100 / 75 14750 / 110 /130
Dimensions LxWxH (mm) 2000x1200x1500 2000x1200x1500 2000x1200x1500 2000x1200x1500 2000x1200x1500
Weight kg 1500 1500 1750 1900 2000
HEAVY DUTY DIESELDRIVEN HIGHPRESSURE WATER BLASTERS
JD90 SERIES from 250 up to 3300 bar
TECHNICAL DATA / MODEL JD90-250 JD90-500Working pressure bar/PSI 500 / 7250
Flow rate lpm/gpm 18 / 4.75
Pump speed rpm 1450
ENGINE SPECIFICATIONS
Type Kubota Industrial3 cyl Diesel Engine
Power hp / kW 21
Rpm 1720
GENERAL SPECIFICATIONS
Fuel Tank l 60
Dimensions LxWxH 1550x920x1250
Weight kg 725
TECHNICAL DATA / MODEL JD90-800 JD90-1000 JD90-1500 JD90-2100 JD90-2500Working pressure bar/PSI 800/11600 1500 / 21750 2100 / 30457 2500 /
Flow rate lpm/gpm 23.1 / 6 11 / 2.90 10 / 2.64 27 /
Pump speed rpm 1000 750 1000 1500
ENGINE SPECIFICATIONS
Type Kubota Industrial Kubota Industrial Diesel Industrial Engine Perkins Industrial 4 cyl Diesel Engine 4 cyl Diesel Engine (Kubota / Perkins) Engine
Power hp / kW 50.2 / 37.4 50.2 / 37.4 73.72 / 55 130/
Rpm 2100 2100 2100
GENERAL SPECIFICATIONS
Fuel Tank l 80
Dimensions LxWxH(mm) 1550x1100x1250 1550x1100x1250 2000x1500x1500 2250x1000x1300
Weight kg 950 950 1700 1900
JD 90-500
Stantard Equipment- 20m High Pressure Hose- Trigger Operated Gun with Lance- Fan Jet Nozzle- Manual Pressure Regulator ( JD90-500)- Thermo – Mechanical Valve ( JD90-500)
Standard Features- Galvanised Base and Frame- Stainless Steel SS316 Electric Box- Stainless Steel SS316 Water Tank- Listing Eye- Pneumatic Wheels (on mobile models)- Brake System (on mobile models)
- Bust Safety Valve- Stainless Steel Two - Stage Filters
Chassis & Frame PaintEpoxy Paint System 2 Component-Primer – Interzinc 22 / Inorganic Zinc Rich Silicate
-Intermediate coat - Intergard 400 / Epoxy-Top coat - Interthane 990 / Polyurethane
Optional Accessories- Ultra High Pressure Hoses- Hose Connectors- Hose Reel- Foot Valve- Rotating Nozzles
- Protective Clothing- Repair Kits
HEAVY DUTY PETROLDRIVEN HIGHPRESSURE WATER CLEANERS
JP SERIES from 200 up to 500 bar
PRESSURE WASHERJP13-250
TECHNICAL DATA / MODEL JP 20-500PUMP SPEC.
Working pressure 500 bar / 7000 psi
Maximum pressure 500 bar / 8000 psi
Flow rate 16 lpm / 4.4 gpm
Pump speed 1500 - 1750 rpm
ENGINE SPEC.
Type Petrol Robin Subaru
Power 20 hp / 15 kW
Fuel Tank 6 l
Fuel consumption 1.75 l / hour
Machine dimensions LxWxH (cm) 110 x 75 x 80
Machine weight Kg 280
JP 20-500WATER BLASTING
PRESSURE WASHERJP9-200
TECHNICAL DATA / MODEL JP 9-200 JP13-250Operating pressure 200 bar / 2900 psi 250 bar / 3625 psi
Delivery Rate 13 lpm / 3.43 gpm 17 lpm / 4.49 gpm
Engine Power 9 hp 13 hp
Pump Type TPBH5 CL5
RPM 3400 1700
Inlet max water temperature 40°C 40°C
GENERAL DATA
Dimensions LxWxH (cm) 103 x 50 x 67 100 x 66 x 92
Weight Kg 45 61
Stantard Equipment- Trigger Operated Gun with Lance- High Pressure Nozzle Set ( JP9-200)- Fan Jet Nozzle ( JP13-200)- High Pressure Hose - 10 m
Ergonomic handle
Power cable holder
Pressure adjusting knob
JE20 SERIESMODEL JE20-1211Operating pressure (bar) 30 - 125 bar
Operating pressure (psi) 435 - 1812 psi
Delivery Rate 5.75 - 11 l/min
Delivery Rate 1.52 - 2.91GPM
Abs. Power / Voltage 3000 W / 230V~50Hz 1 ph
Motorpump Type MP3
RPM 1450
Inlet max Temperature 40°C
Machine Dimensions 50x90x83 cm
Machine Weight 44Kg / 96.8lbs
Standard Equipment- Gun with Rotating Coupling- Lance with Fan Jet Nozzle- Power Cable 5m- High Pressure Hose 10m
COLD WATERHIGH PRESSURE CLEANERS
JE10 SERIES
Steel cover
Power cable holder
Steel frame
Glicerine pressure gauge
• Three ceramic pistons, brasslinear pump head with built-in by-pass valve.
MODEL JE10-1510Operat. pressure/max 30 - 150 bar (max 160 bar)
Operat. pressure/max 435 - 2175 psi (max 2320)
Delivery Rate 5.75 - 9 l/min
Delivery Rate 1.52 - 2.38 GPM
Abs. Power/Voltage 3000 W / 230 V~50 Hz 1 ph
Motorpump Type MP3
RPM 1450
Detergent Tank 3,8 l. / 1 gal
Inlet max Temperature 40°C
Machine Dimensions 76x41x75 cm
Machine Weight 33Kg / 72.6 lbs
Standard Equipment- Gun with Rotating Coupling- Lance with Fan Jet Nozzle- Power Cable 5m- High Pressure Hose 8m
JE20-201530 - 200 bar
435 - 2900 psi
7.5 - 15 l/min
1.52 - 3.96 GPM
7000 W / 400V~50Hz 3 ph
MPW5
1450
40°C
50x90x83 cm
47,5 Kg / 104.5 lbs
When choosing a professional product, efficiency, reliability, safetyand ease of use are the key factors. Combijet has developed a coldwater pressure washers line, which with high-tech products, candeliver perfect hygiene and clean with time and labour efficiency.
Standard equipment for all models include: gun with rotatingcoupling, lance with nozzle-holder, power cable 5m and highpressure hose of 8 or 10m depending on the model. All machineshave ergonomic handle and tough wheels, assuring thatperformance is not affected by the conditions.
50Hz 50Hz
JE20 SERIESMODEL JE20-2018 JE20-2513Operating Pressure (bar) 30-200 bar 30-250 bar
Operating Pressure (psi) 435-2900 psi 435-3600 psi
Delivery Rate 9-18 l/h 7.5-13 l/min
Delivery Rate 2.38 GPM 1.98-3.44 GPM
Abs. Power/ Voltage 8400 W / 380V~60 Hz 3 ph 8700 W / 380V~60 Hz 3ph
Motorpump Type MPW5 MPW5
RPM 1700 1700
Inlet max Temperature 40°C 40°C
Machine Dimensions 50x60x107 cm 50x60x107 cm
Machine Weight 53Kg / 117 lbs 54Kg
Standard Equipment
- Gun with Rotating Coupling
- Lance with Fan Jet Nozzle
- Power Cable 5m
- High Pressure Hose 10m
JE30 SERIESMODEL JE30-1310DOperat. Pressure/max 30-130 bar (max 150 bar)
Operat. Pressure/max 435-1885 psi (2175 max psi)
Delivery Rate 5.5 -11 l/min
Delivery Rate 1.45 - 2.64 GPM
Abs. Power/Voltage 3000 W / 230V ~ 50 Hz 1ph
Motorpump Type / RPM MPBX2 / 2800
Diesel tank / Detergent tank 14/2,5 l. -3,7/0.66 gal
Max Temp. inlet/outlet 40°C / 90°C
Fuel Consumption / Heat Output 2,83 l/h - 0,75 gal/h / 38 kw
Machine Dimensions 80x55x83 cm
Machine Weight 54kg / 121 lbs
The hot water high-pressure cleaner is the best solution fortough or non water-soluble dirt removal. This series of washersis suitable for different uses and ideal in several industrial sectorslike agriculture, food industry and building- construction. Hot andCold water pressure washers are excellent for washing tools,farm tractors, means of transport and heavy building equipmentlike cement mixers, cranes, earth-moving equipment etc.
Standard equipment are the same as for the Cold Water PressureWashers. A single piece of polypropylene makes the machinesresistant to impact and weather conditions, whilst access to mainmechanical components is very easy.
HOT & COLDWATER HIGHPRESSURE CLEANERS
60Hz
50Hz
NEW
MODEL
Steel cover
Power cable holder
Steel frame
Standard Equipment
- Gun with Rotating Coupling
- Lance with Fan Jet Nozzle
- Power Cable 5m
- High Pressure Hose 10m
Easy access to main
mechanical components
Impact and weather
resistant, single piecepolypropylene cover
Inlet water filter
Easy access to main
mechanical components
Impact and weather
resistant, single piecepolypropylene cover
Lance / gun holder
Standard Equipment
- Gun with Rotating Coupling
- S/S Lance with Fan Jet Nozzle
- Power Cable 5m
- High Pressure Hose 10m
HOT & COLD WATER HIGHPRESSURE CLEANERS
JE30 SERIES
Standard Equipment
- Gun with Rotating Coupling
- S/S Lance with Fan Jet Nozzle
- Power Cable 5m
- High Pressure Hose 10m
MODEL JE30-1211Operating Pressure/max 30-110 bar / 150 bar
Operating Pressure/max 435-1595 psi / 2175 psi
Delivery Rate 5.75-11 l/min
Delivery Rate 1.52-2.91 GPM
Abs. Power/Voltage 3000 W / 230V ~ 50 Hz 1ph
Motorpump Type MPW
RPM 1450
Outlet Temperature Max 140°C
Fuel Consumption 4.72 l/h - 1.25 gal/h
Diesel Tank 18 l / 4.8 gal
Heat Output 58 kW
Machine Dimensions 94x65x90 cm
Machine Weight 125kg / 275 lbs
50Hz 50Hz 60Hz
MODEL JE30-2015 JE30-2018Operating Pressure (bar) 30-200 bar 30-200 bar
Operating Pressure (psi) 435-2900 psi 435-2900 psi
Delivery Rate 7,5-15 l/min
Delivery Rate 1.98-3.96 GPM 4.78-9.56 GPM
Abs. Power/Voltage 7300W - 400V~50Hz 3ph 8700W - 380V~60Hz 3ph
Motorpump Type / RPM CL5 / 1450 CL5 / 1700
Diesel Tank / Detergent Tank / Antiscale 22/22/2,4 l.-5.82/5.82/0.63 gal 22/22/2,4 l.-5.82/5.82/0.63 gal
Max Temp. inlet/outlet 40°C / 140°C 40°C / 140°C
Fuel Consumption / Heat Output 6.6 l/h (1.75 gal/h) / 88 kW 6.6 l/h (1.75 gal/h) / 88 kW
Machine Dimensions 125x69x87 cm 125x69x87 cm
Machine Weight 175kg / 385 lbs 175kg / 385 lbs
JE20 SERIES from 200 bar
Standard Equipment
- Gun with Rotating Coupling
- S/S Lance with Fan Jet Nozzle
- Power Cable 5m
- High Pressure Hose 10m
TECHNICAL DATA / MODEL JE20-2015ST JE20-2021STOperating pressure 200 bar / 2900 PSI 200 bar / 2900 PSI
Delivery Rate 15 l/min / 3.96 GPM 21 lpm / 5.55 GPM
Abs. Power / Voltage 7300 W / 400V 50Hz 3ph 9700 W / 400V 50Hz 3ph
Motorpump Type / RPM MPW5 / 1450 MPW5 / 1450
Diesel Tank / Detergent Tank / Antiscale 20/20/2.4 L 20/20/2.4 L
Max. Temp Inlet / Outlet 40° / 140° C 40° / 140° C
Fuel Consumption / Heat Output 4.72 l/h (1.25 gal/h) / 58 kW 4.72 l/h (1.25 gal/h) / 58 kW
GENERAL DATA
Machine Dimensions LxWxH 76 x 48 x 180 cm 76 x 48 x 180 cm
Machine Weight 190 kg / 418 lbs 190 kg / 422 lbs
STATIONARY HOT & COLDPRESSURE CLEANERS
CJV SERIESMODEL CJV-265IF CJV-365IRMotor W 2000 (max 2400) 3000 (max 3600)
Column depression 220 mbar/22kPa 220 mbar/22kPa
Suction air 130 l/s 195 l/s
Tank capacity 65 l. 65 l.
Voltage 220 - 240 ~ 50/60 Hz 220 - 240 ~ 50/60 Hz
• 2 high efficiency • 3 high efficiencyby pass motors by pass motors
• Suction system with • Suction system withby-pass cooling by-pass cooling
• Filter cleaning system • Filter cleaning system
• Stainless steel tank • Stainless steel tank
• Cloth filter • Cloth filter
• Handy accessory holder • Handy accessory holder
• Traceless wheels • Traceless wheels
• Accessories Ø 40 • Accessories Ø 40
• Tilting tank
• Silenced Motor (high efficiency)
• Option for Low Noise and Low Consumption (40% energy saving)
• Washable Cartridge Fiilter
• Accessory Holder
• Pneumatic Filter Shake
VACUUMCLEANERS
MODEL CJV-2350Power supply 230V ~ 50/60 Hz
N° / motor type 1x/silenced dry cup
Power (max) 1000 (1200) W
Motor cooling thruflow
Column depression 24kPa/2400mm H2O
Air suction 45 l/s
Total volume 15 l
Emptying manual
Filter washable
Electrical cable lenght 7,5 m
Dimensions 47x34x36 cm
Machine weight 5,5 kg
Standard Equipment:
Vacuum Cleaners range is the best solution when working conditionsand dirt type are extreme, dangerous or difficult to manage. Innovativefiltering systems, tough construction and the possibility to work withdangerous dusts, all set new standards in the industrial sector forextensive working expectations, productivity, filtering capacity andefficiency.
Vacuum Cleaners are represented by the CJV series of Combijet.Models like CJV-265IF, CJV-365IR, CJV-2350, CJV80-22 are able tocover every need. 2 or 3 (depending on the model) high efficiency by-pass motors, suction system with by-pass cooling, filter cleaningsystem, stainless steel tank, cloth filter. Handy accessory holder andtraceless wheels are some of the main characteristics of the vacuumcleaners.
• 5.209.0021
• 6.205.0126
• 3.754.0048
• 3.754.0049
• 3.754.0083
• 3.754.0084
• 3.754.0085
• 6.205.0151
Standard Accessories
- Hose 2.5 m- Steel Pipe & Curve- Flat Lance- Round Bruch- Holder Accessory- Wet Tool- Carpet Tool
MODEL CFJ-50Capacity / Body 50 l / Stainless Steel
Working Pressure 6 bar
Safety Valve max 8 bar
Pressure Indicator Pressure Gauge
Level Indicator External Column
Recharging Air Operating
Pressure Regulator Manual
Gun Connection 1/4" G-F
Hose Type Rilsan
Hose / Lance Length 10m / 900 mm
Dimensions 45x42x100 cm
Weight 18 Kg
Professional closing
hooks
Turbine room
Steel frame
Steering wheels
with brake
Drain hose
Stainless steel
Epoxy varnishing
FOAMSPRAYERS
MODEL CJV80-22Abs. power W 2200
n˚/ type motor 1x induction
Column depression 32 kPa (3200 mmH2O)
Suction air 97 l/s
Tank volume 80 lt
Dust capacity 36 lt
Liquid capacity 49 lt
Noise level 74 dB (A)
Voltage 230 V ~ 50/60 Hz (1Ph)
Filtering surface 4300 cm2
Filtering capacity 5 μm
Cable length 10 m
Dimensions 50x50x140 cm
Weight 80Kg / 176 lbs
Standard Accessories
- Flexible hose Ø 40 - 3m
- Flat lance Ø 40
- Cloth Filter
Optional Accessories
- Steel curve + pipe Ø 40
- Round brush Ø 40
- Accesories holder Ø 40
- Floor brush
- Wet tool
- Carpet tool
- Washable filter
CJV SERIES CFJ SERIES
• IP 65 silenced turbine motor
• Floating valve• Anti electrostatic current structure• Non-overturning steel structure
• Drain hose system
VACUUMCLEANERS
Foam sprayers are used when thorough anddetailed cleaning is needed, and usually thechemical product spraying is a finishing phaseof the cleaning task.
The machine is connected to an air compressor,where the chemical is mixed with the air,producing a sost foam that persists on thesurface, allowing deep and prolonged action ofthe detergent used.
Standard Accessories:
- Professional Gun
- Lance with Nozzle
- Integrated Inlet and Outlet Quick
- Chemical use hose and Gasket
Standard Equipment
• 5.209.0021
• 3.754.0048
• 6.205.0151
Optional Accesories
• 6.205.0126
• 3.754.0049
• 3.754.0083
• 3.754.0084
• 3.754.0085
• 5.212.0021
HEAVY DUTYSTEAMGENERATORSJS series of steam generators is suitable to degrease andsanitize any object or surface in an easy, ecological anddefinitive way. It is ideal for food and baking industry, forprivate and institutional use, for pharmaceutical andmechanical industry, for dairy factories, for buildingsectors and many others.
TECHNICAL DATA / MODEL JS 3000 JS 3.3 (Vacuum + Steam Generator) (Electric Steam Generator)
Abs. Power / Voltage 3 kW / 230 V~50 Hz 3.3 kW / 230 V~50 Hz
Max pressure / Temperature 6 bar / 158 °C 9 bar / 175 °C
Steam Production 3.5 kg / h 4.62 kg / h
Boiler Type / Volume INOX AISI 304 INOX AISI 304
Water / Detergent Tank 5l/5l 5l/5l
Recovery Tank Capacity 64l -
Heating & Activation Time 4 - 7 min 7 - 10 min
Vacuum Motor 1100 W -
Depression 20.39 k Pa / 2000 mm H20 -
Air Flow 220 m3 / h -
Cable Length 6 m 2.4 m
Noise Level 73 dB (A) 80 dB (A)
Machine Dimensions 630 x 540 x 880 cm 620 x 440 x 860 cm
Machine Weight 32 kg 34 kg
TECHNICAL DATA / MODEL JS D10 (Single Operator) JS D10 (Tow Operators)
Electric Source 220-230 V (50~60 Hz) 220-230 V (50~60 Hz)
Connected Load 350 W 350 W
Fuel / Water Tank 25 / 25 lt 25 / 25 lt
Burner Type DIESEL DIESEL
Fuel Consumption 3 lt / h 3.78 lt / h
Pre-heating Time 5 min 5 min
Steam Production 37.5 kg / h 47 kg / h
Steam Pressure 10 bar 10 bar
Steam Temperature 178 °C 178 °C
Dimensions 90 x 65 x 80 cm / 122 kg 90 x 65 x 80 cm / 122 kg
Standard Equipment
• 6.402.0085
• 6.402.0082
• 6.405.0207
• Steam Nozzle
JS SERIES Steam Generator with Diesel Boiler
Standard Equipment
- Steam Gun with Hose -10m
- Straight Lance
- Brushes Set
- Steam Nozzle
Standard Equipment (JS3000)-Vacuum Handle with Hose 4m-Hose 2m-Extension-Accessories Connector-Flat Lance-Suction Nozzle
-Brush Holder-Liquid/ Dust/ Carpet Frame-Brusher Set-Rectangular Nozzle-Glass Wiper-Suction Round Brush-Washable Filter
Standard Equipment (JS 3.3)- Hose 3 m- Steam Extension Pipe- Rectangular Steam Brush- Triangular Steam Brush- Steam Window Wiper
- Brush Joint- Steam Lance with Nozzle- Brushes Set- Triangular Brush (Nylon)- Small Brush ( Nylon)- Steam Scraper
Standard Equipment:
• 5.211.0068
• 5.209.0151
• 3.753.0085
• 3.754.0195
• 3.754.0005
• 5.209.0126
• 3.754.0192
• 3.754.0109
• 3.754.0108
• 3.754.0110
• 6.405.0207
• 3.754.0194
• 3.754.0215
• 3.754.0204
• 5.212.0021
CLEANING& BLASTINGROBOTCombijet proudly present itsnew innovative product“THE ROBOT”.A Robotic heavy duty high pressurewater blasting equipment suitablefor all vertical steel cleaningoperations.
Our robots enable shipyards , off shore andpetrochemical industry to clean or blast steel surfacesin a faster, safer, environmentally friendly and costeffective way.
Our products offer significant advantages over thetraditional methods of sand blasting to remove marinegrowth, industrial coatings and corrosion.
• The ability to work simultaneously in close proximity to other trades or maintenance processes.
• Reduced manpower requirements
• No clean up costs
• Eliminates access requirements (staging, cranes, platforms, e.t.c.)
• Fast, Safe, Clean and Efficient operation
• Full Service package
TECHNICAL SPECIFICATIONS RJE-1000 Cleaning Robot RJE-1000 Ultra High Pressure RJE-1000 VacuumRecommended pump capacity 500 bar @ 50 ltrs / min 3000 bar @ 30 ltrs / min 3000 bar @ 40 ltrs / min
Working width 1000 - 2500 mm 1600 mm 400 mm
Cleaning capacity Up to 200 m2 / h Up to 50 m2 / h Up to 50 m2 / h
Drive system / speed 5 - 20 m/min 5 - 20 m/min 5 - 20 m/min
Robot weight 54 Kg 54 Kg 72 Kg
Total weight (frame & control unit) 120 Kg 120 Kg 135 Kg
Electrical CEE plug 220 Volt 16 Amp / 110 Volt 20 Amp 220 Volt 16 Amp / 110 Volt 20 Amp 220 Volt 16 Amp / 110 Volt 20 Amp
Dimensions (L, W, H) 90cm x 80cm x 48cm 90cm x 80cm x 48cm 120cm x 50cm x 45cm
Remote control unit IMETM550s Zeus B IMETM550s Zeus B IMETM550s Zeus B withMAC receiver withMAC receiver withMAC receiver
TAILOR-MADESOLUTIONS
HYDROBLASTINGSERVICES
Combijet offers highpressure waterblasting solutions,tailor-made to yourapplication andrequirements.
This includes: • Different working pressure and flow
configurations• Containerized Ultra High Pressure
Systems, upto 3300 bar working pressure and 50 l/min flow-rate
• Full range of accessories and attachments
Contact us to find more details about whatwe can offer
Combijet Manufacturing and Dememarine Services can offer youcustom made water blasting solutions for your surfacepreparation needs.
Using the innovative robotic equipment, we are able to carryout washing, hydroblasting and vacuum hydroblasting,whether it is on hulls, in cargo holds, on storage tanks orother. We take up the challenge to position our robotsanywhere possible.
The products offer significant Water Blasting advantages overthe traditional methods of sand blasting to remove marinegrowth, industrial coatings and corrosion.
• Ability to work simultaneously in close proximity to other trades or maintenance processes.
• Reduced manpower requirements and fast job delivery• No Clean up costs• No access requirements (staging, cranes, platforms, etc.)• Fast, Safe, Clean and Efficient operation
Contact us to find out more about this service.
ACCESSORIES
Ultra Impact Rotating Nozzle
ACCESSORIES FOR JE80 & JD90 SERIES
Underwater Gun
ACCESSORIES FOR JE60 SERIES
Cutting Accessories
Other accessories available upon request.
Contact us for our full range of accessories and parts.
Gun 500bar Lance 500bar
ACCESSORIES FOR JE10, JE20 & JE30 SERIES
Gun 3/8˝ M22 for Models: JE10-1510, JE20-1211, JE20-2015,JE20-2018, JE30-1310D
Straight Nozzle Surface Cleaner &Tank Cleaner
Lance 1/8˝ F
Rotating Nozzle
High Pressure Lance
Single Jet Rotating Nozzle
HIGH PRESSURECLEANING PROTECTION
Protective Overall with Hood 500 bar
High Pressure Cleaning (up to 500 bar)
Protective Apron 500 bar
Protective Boots 500 bar Protective Gloves 500 bar
Ultra High Pressure Water Blasting (up to 3000 bar)
Protective Boots3000 bar Straight or Rotary Jet
Protective Suit(Jacket, Trousers, Hand Protection)
1000 bar Straight Jet / 2800 bar Rotary Jet2000 bar straight Jet / 3000 bar Rotary Jet
Protective Apron1000 bar Straight Jet / 2800 bar Rotary Jet2000 bar straight Jet / 3000 bar Rotary Jet
www.combijet.com
Single and 3-phase Hot & Cold Water Pressure Cleaners Light-duty Foam Sprayers
JS SERIES
JE60 SERIESElectric Driven High Pressure Water Jet Cleaners from 350 bar- 500 bar
JE80 SERIESElectric Driven High Pressure Water Blasters from 800 bar-2300 bar
JE10 SERIESSingle phase Cold Water Pressure Washers
JD90 SERIESDiesel Driven High Pressure Water Blasters from 500 bar -1250 bar
JE30 SERIES CFJ SERIES
Steam GeneratorsVacuum CleanersPetrol Driven High Pressure Water Cleaners from 200 bar - 500 bar
CJV SERIESJP SERIES
NEW
MODEL
Images and technical specifications of products and accessories arenot binding and can be modified without notice.
JE20 SERIES3-phase Industrial Cold Water Pressure Washers