Embed Size (px)
Citation preview
e-mail: [email protected] 1-800-667-8001 e-Power Instruments 1
Flee
t M
anag
emen
tM
urph
y Sy
stem
sIS
SPRO
Gau
ges
Elec
trica
lSp
ecia
lty I
nstru
men
ts
Enhanced Visibility Gauges
Pyrometers 2 Tachometers 2 Mechanical Gauges 3 Electric Gauges 4
Heavy Duty Instruments
Fuel Gauges & Senders 5 Pyrometers 6 - 7 Electric Gauges 8 - 9 Mechanical Gauges 10 Specialty Products 11 - 13 Tachometers 14 - 15 Speedometers 16 - 20
ISSPRO Gauges
� e-Power Instruments 1-800-667-8001 www.e-powerinstruments.com
Enhanced Visibility Products |3 White dished face dial, blue backlit numerals, illuminated blue pointer and
chromed brass low-profile bezel on Marine series 3 Convex scratch-resistant glass lenses 3 Antifog solution applied to inside of glass lenses 3 All instruments frontally sealed 3 All outer plastic parts are UV stabilized 3 Glass filled white polyester case resists corrosion and vibration and augments
lighting, designed for superior night time viewing 3 The mechanical pressure and temperature gauges, as well as the pitot speed-
ometer, feature a phosphor bronze bourdon tube linked to a gear and pinion arrangement for accurate indication
3 Most gauges are for 12V DC operation Unless otherwise specified
Order No. Mfg. PN Description Bulb Type Price
Electrical Air Core Pyrometers - Thermocouples, Leadwires, sold on Page 7
E70150 R3707 2 1/16”, 100 - 1800oF Gas Engine (2) T-5 $144.95
E70155 R3707G 2 1/16”, 100 - 1500oF Diesel Engine (2) T-5 $144.95
3 3/8” Pitot Type Marine SpeedoIsspro supplies rugged, reliable, heavy-duty speedometers to OEM’s and now brings that expertise to the marine market. A high-quality mechanical and microprocessor-based program-mable speedometer is offered.
E07255 R6440 3 3/8”, 60 mph, No Odometer 2 Bulbs $12995
3 3/8” Programmable TachometersThis microprocessor-based instrument is designed to accept signals from pulse generators, magnetic sensors and alternators. Unit features dip switch programming. Mounting hardware and light kit included. 12 or 24V DC. NG operation.
E02300 R6535M 0 - 3500 rpm (2) T-6.5 $199.95
Ignition TachometersThese tachometers are designed for most standard ignition systems that have a coil type ignition or tach output connection. Applications are for 4, 6 or 8 cylinder four stroke engines. All units are 12 and 24V DC capable. Mounting hardware and light kit included.
E05900 R6510 2 1/16”, 0 - 6000 rpm (2) T-5 $164.95
E05910 R65100 3 3/8”, 0 - 6000 rpm (2) T-6.5 $164.95
2 1/16” Diesel TachometersWhile these tachometers are designed for diesel systems, they will work with any two pulse/rev. sender. All units are 12 and 24V DC capable. Mounting hardware and light kit included.
E05650 R6501 0 - 3000 rpm (2) T-5 $171.95
E05655 R6503 0 - 4000 rpm (2) T-5 $171.95
Sensor Kit, Replacement Magnet KitE15770 R8906 Sensor Kit $69.95
E15720 R8911 Replacement Magnet Kit with Epoxy $35.95
Electrical
E70155 Pyrometer 100 - 1500oF Diesel Engine
E07255 0 - 60 mph 3 3/8” Speedometer
E02300 0 - 3500 rpm3 3/8” Programmable Tachometer
E05900 0 - 6000 rpm2 1/16” Ignition Tachometer
E05650 0 - 3000 rpm2 1/16” Diesel Tachometer
E05910 0 - 6000 rpm3 3/8” Ignition Tachometer
E05655 0 - 4000 rpm2 1/16” Diesel Tachometer
E70150 Pyrometer 100 - 1800oF Gas Engine
Isspro Enhanced Visibility Products
e-mail: [email protected] 1-800-667-8001 e-Power Instruments �
Flee
t M
anag
emen
tM
urph
y Sy
stem
sIS
SPRO
Gau
ges
Elec
trica
lSp
ecia
lty I
nstru
men
ts
2 1/16” Mechanical Gauges |Mechanical gauges sense pressure or temperature through tubing that transmits the pressure, vacuum or temperature Electricity required for operation is for night lighting only Senders are not needed for mechanical gauges All mechanical gauges have a 270o sweep
E67575 Oil Pressure0 - 100 psi
E67620 Dual Air Pressure0 - 150 psi
E67770 Manifold Pressure0 - 15 psi
E67775 Manifold Pressure0 - 40 psi
E67780 Turbo Boost0 - 30 psi
E67720 Vacuum/Turbo Pressure 0 - 30” Hg - 0 - 25 psi
E67785 Turbo Boost0 - 60 psi
E69545 Water Temperature100 - 265oF with 12’ Capillary
E69540 Water Temperature100 - 265oF with 6’ Capillary
E69580 Oil Temperature140 - 325oF with 12’ Capillary
Order No. Mfg. PN Description Bulb Type Price
Mechanical Oil Pressure GaugeE67575 R6701 0 - 100 psi (1) T-10 $54.95
Mechanical Air Pressure Single GaugeE67615 R6705 0 - 150 psi (1) T-10 $72.95
Mechanical Dual Air Pressure GaugeE67620 R6706 0 - 150 psi (1) T-10 $89.95
Mechanical Manifold Pressure Gauges
E67770 R6711 0 - 15 psi (1) T-10 $67.95
E67775 R6710 0 - 40 psi (1) T-10 $67.95
Mechanical Turbo Boost GaugesE67780 R6713 0 - 30 psi (1) T-10 $61.95
E67785 R6723 0 - 60 psi (1) T-10 $61.95
Mechanical Vacuum/Turbo Pressure GaugeE67720 R6871 0 - 30” Hg - 0 - 25 psi (1) T-10 $61.95
Mechanical Water Temperature GaugesE69540 R6730 100 - 265oF with 6’ Capillary (1) T-10 $87.95
E69545 R6731 100 - 265oF with 12’ Capillary (1) T-10 $98.95
Mechanical Oil Temperature GaugesE69580 R6736 140 - 325oF with 12’ Capillary (1) T-10 $98.95
Pressure Tubing KitsE66950 R7110 Oil Pressure Tubing Kit 1/8” NPT 6’ $15.95
E66960 R7172 Oil Pressure Tubing Kit 1/8” NPT 16’ $19.95
E66970 R7111 Vacuum Tubing Kit 1/8” NPT 6’ $15.95
Isspro Enhanced Visibility Products
E6695 Oil Pressure Tubing Kit 1/8” NPT 6’
� e-Power Instruments 1-800-667-8001 www.e-powerinstruments.com
2 1/16” Electric Gauges |
Electrical gauges are designed with a silicone dampened air core movement A coil of wire is wound around a bobbin with a center magnet When an electrical current is applied to the coil, the gauge pointer moves to the resulting electrical field Wire, electrical terminals and 12V DC from the vehicle are required for installation 270o sweep Electrical gauges include amplifier and sender; this matched calibrated set is required for operation
Order No. Mfg. PN Description Bulb Type Price
Electrical Oil Pressure Gauges Provided with signal amplifier and sender (matched set). Oil pressure sender is 1/8” NPT.
E67045 R6721 0-100 psi, (2) T-5 $122.95
Electrical Temperature Gauges Provided with signal amplifier and sender (matched set). Supplied with 1/8” NPT tempera-ture sender and 1/4”, 3/8”, 1/2” NPT adapters.
E69025 R6750 100 - 240oF, Water (2) T-5 $122.95
E69045 R6754 140 - 320oF, Oil (2) T-5 $127.95
E69050 R6756 140 - 320oF, Trans oil (2) T-5 $127.95
VoltmetersE70730 R6760 12V DC / 10 -16V DC (1) T-10 $56.95
E70735 R6761 24V DC / 20 - 32V DC (1) T10 $56.95
E67045 Oil Pressure0 - 100 psi
E69025 Temperature100 - 240oF, Water
E69045 Temperature140 - 320oF, Oil
E70730 Voltmeters12V DC / 10 -16V DC
BezelsSize Red Black White Chrome Blue Brass
2 1/16” order by color. . . . . . . . . . . . . . . $3.25
2 1/6” E50600 E50601 E50602 E50603 E50604 E50605
3 3/8” order by color. . . . . . . . . . . . . . . . $5.55
3 3/8” E50606 E50607 E50608 E50609 E50610 E50611`
EV Replacement Bulbs
Bulb Type T-5 T-6.5 T-10
12V order by bulb type . . . . . . . . . . $ 1.39
12V E50530 E50531 E50532
24V order by bulb type . . . . . . . . . . $ 1.95
24V E50533 E50534 E50535
Isspro Enhanced Visibility Products
Replacement Bulbs
Bezels
E70735 Voltmeters24V DC / 20 -32V DC
e-mail: [email protected] 1-800-667-8001 e-Power Instruments �
Flee
t M
anag
emen
tM
urph
y Sy
stem
sIS
SPRO
Gau
ges
Elec
trica
lSp
ecia
lty I
nstru
men
ts
Fuel Gauges & Senders |
RA9200 Series Ultimate Fuel Level SendersRA9200 Series ultimate fuel level sender for volumetric (round/saddle) tanks. Specifically calibrated for the cylindrically shaped tanks most commonly used on class 8 trucks. These senders are ordered by the diameter of the fuel tank. Fluids measured: gas/diesel/biodiesel/alcohol(ethanol)/hydraulic non potable water.
Fuel Level Sender - order by outside diameter size. . . . . . . . . . . . . . . . . . . . . . . . . . .$83.95
Order No. Tank Outside Diameter Order No. Tank Outside Diameter
E70859 20” E70860 22”
E70870 23” E70880 24”
E70890 25” E70900 26”
E70910 27” R70920 28”
E70930 29”
RA9500 Series Ultimate Fuel Level SendersRA9500 Series ultimate fuel level sender for non-volumetric (square/rectangular) tanks.Fluids measured: gas/diesel/biodiesel/alcohol(ethanol)/hydraulic non potable water.
Fuel Level Sender - (6” to 19”) order by tube length. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $66.95
Order No. Tank Depth Tube Length Order No. Tank Depth Tube Length
E70820 6 1/2 - 7” 6” E70821 7 1/2 - 8” 7”
E70822 8 1/2 - 9” 8” E70823 9 1/2 - 10” 9”
E70824 10 1/2 - 11” 10” E70825 11 1/2 - 12” 11”
E70827 12 1/2 - 13” 12” E70827 13 1/2 - 14” 13”
E70828 14 1/2 - 15” 14” E70829 15 1/2 - 16” 15”
E70830 16 1/2 - 17” 16” E70831 17 1/2 - 18” 17”
E70832 18 1/2 - 19” 18” E70833 19 1/2 - 20” 19”
Fuel Level Sender - (20” to 29”) order by tube length. . . . . . . . . . . . . . . . . . . . . . . . . . . . . $79.95
E70834 20 1/2 - 21” 20” E70835 21 1/2 - 22” 21”
E70836 22 1/2 - 23” 22” E70837 23 1/2 - 24” 23”
E70838 24 1/2 - 25” 24” E70839 25 1/2 - 26” 25”
E70840 26 1/2 - 27” 26” E70841 27 1/2 - 28” 27”
E70842 28 1/2 - 29” 28” E70843 29 1/2 - 30” 29”
Fuel Level Sender - (30” to 36”) order by tube length. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $83.95
E70844 30 1/2 - 31” 30” E70845 31 1/2 - 32” 31”
E70846 32 1/2 - 33” 32” E70847 33 1/2 - 34” 33”
E70848 34 1/2 - 35” 34” E70849 35 1/2 - 36” 35”
E70850 36 1/2 - 37” 36”
Order No. Mfg. PN Description Price
Electric - Fuel Level GaugeE70810 R9090 Fuel Level 0-4/4 $47.95
Float Arm Fuel Level SenderAdjustable for use in tanks 5” to 27” deep
E70950 R8925 Fuel Level Sender $53.95
RA9200 Series Ultimate Fuel Sender
E70950Fuel Level Sender
E70810 2 1/16” Fuel Level 0-4/4
RA9500 Series Ultimate Fuel Sender
Technical Tips
When ordering a tube-style sender, it is important to know tank depth and tank shape.
Isspro Heavy Duty Instruments
6 e-Power Instruments 1-800-667-8001 www.e-powerinstruments.com
Isspro Pyrometers |
For over 50 years, Isspro has focused on pyrometers. Excessive heat is one enemy of the turbocharger. The maximum input of a turbocharger is approximately 1400°F. Temperatures above this will deteriorate the turbo housings, crack them and foul the compressor wheels, intake and exhaust manifolds as well as cylinders will crack. A pyrometer is an exhaust temperature gauge that allows you to read an immediate change in exhaust temperature by receiving a temperature signal from a probe (thermocouple) that is inserted into the exhaust manifold. This constant monitoring of temperature changes alerts the driver to temperature problems well before indications would be received from a typical water temperature gauge. Equipment operators use pyrometers to diagnose engine problems and drive more efficiently, prolonging engine life and reducing fuel consumption.
3 Reduce fuel consumption3 Save on engine wear3 Avoid engine lugging as indicated by higher temperatures3 Save on turbo wear by letting exhaust gas temperatures cool down
to safe temperatures before shutting down; thermocouple is normally located after the turbo-charger
3 Upgrade your equipment; exhaust temperature gauges are now stan-dard on most new vehicles
Standard Features of Pyrometers:3 All pyrometers have red-orange
pointers3 Black bezel3 12V DC light kit and mounting
hardware included3 For highest accuracy and long
life, do not mix components from other manufacturers within a pyrometer system
3 One-year warranty
This tester is used as a continuity checker for testing leadwires and thermocouples and for checking pyrometers. This eliminates guess-work by checking the t h e r m o c o u p l e a n d leadwire continuity. It allows you to run the meter through the entire scale to check its op-eration, thus diagnosing the complete system in minutes.
E88020 (R600) Pyrometer Tester .......... $179.95
Pyrometer Tester |
To design your own pyrometer system, you will need:
3 Pyrometer. To choose the proper pyrometer, determine the tempera-ture range (most diesel and gas engines range from 0-300 bottom end of the scale to 1500-1800 top end of scale); and size of the mounting hole. To determine your safe maximum exhaust temperature, run a well-tuned engine at full rpm and horsepower on the inertia dynamometer or under a loaded pull. Note the exhaust temperature and subtract 200 degrees. This is your safe maximum exhaust temperature. This temperature may be exceeded for a short period and will not cause serious damage. Stay in the upper one third of your temperature range as much as possible. Operation in the lower range isn’t as critical as exceeding the maximum range.
3 Leadwire. High temperature extension type leadwire available in 10’, 16’ and 20’ lengths. Aircraft quality Kapton leads are encased with a flexible wire braid to protect them from heat and abrasion. When heat is applied to the junction, a tiny voltage is produced and travels up the leadwire to the gauge. It is important never to solder the leadwire, as each solder joint will act as an additional junction generating voltage.
3 Thermocouple. Type K thermocouple with ¼” NPTF mounting. Also available with a ¼” brass slip nut for easy depth adjustment. This thermocouple produces – 1.63mV at 0°F and 26.03mV at 1200°F. The thermocouple is the power source of the whole system. Two different types of metal are induction welded together in the tip of the thermocouple. The tip is made of stainless steel and is filled with a ceramic material.
Isspro Heavy Duty Instruments
e-mail: [email protected] 1-800-667-8001 e-Power Instruments 7
Flee
t M
anag
emen
tM
urph
y Sy
stem
sIS
SPRO
Gau
ges
Elec
trica
lSp
ecia
lty I
nstru
men
ts
E70100 3” Turbocator
Isspro Pyrometers |
E70050 2 1/6” Pyrometer250° sweep
E70080 2 1/6” Pyrometer250° sweep, colored dial
E70090 2 1/6” Digital Pyrometer
E70010 2 ¾” Pyrometer100o sweep
E70040 3” Pyrometer250° sweep
E70070 3” Dual Pyrometer
E70210 ¼” NPTF Universal Thermocouple
E70310 ¼” NPTFWeld Bushing
E70370/E70380 10’/16’ Leadwire
3 Black bezel3 Red-orange pointers 3 12V DC light kit and mounting hardware included
Order No. Mfg. PN Description Price
2 1/16” PyrometersE70050 R607 0-1800°F/0-1000°C 250° Sweep $179.95
E70080 * R607VW 0-1500°F Color Coded Dial 250° Sweep $179.95
E70090 R630 0-1990°F Digital Pyrometer $319.95
* Must be mounted after the turbo charger
2 ¾” PyrometerE70010 R602 0-1800°F/0-1000°C 100° Sweep $179.95
3” PyrometerE70040 R606 0-1800°F/0-1000°C 250° Sweep $179.95
E70070 R624 300-1500°F/0-800°C Dual Meters $199.95
3” TurbocatorDual Scales allow monitoring of exhaust temperature on the lower scale and turbo boost pressure on the upper scale. Pressure tubing kit sold separately.
E70100 R609 300-1500°F/0-30 psi Turbo Boost $239.95
E66990 R7120-10 Turbocator Tubing Kit $ 19.95
Thermocouples (Type K)
2 ½” length, ¼” NPTF. Encased in flexible wire braid which protects from heat, reduces kinking and increases flexibility. Resistant to exhaust fumes. Adjustable probe style has a slip nut for easy depth adjustment from 0-2 ½”.
E70210 R650 Universal Thermocouple $69.95
E70260 R658 Adjustable Thermocouple $69.95
Weld BushingWeld bushing on to exhaust tube to give a ¼” NPT connection to mount E70210 or E70260 thermocouple.
E70310 R680 Weld Bushing $5.95
Leadwires
Coaxial cable-type leadwire. When used with pyrometer thermocouple, ensures an accurate reading at all times. Available in 10’, 16’ and 20’ lengths.
E70370 R660-10 10’ Leadwire $29.95
E70380 R660-16 16’ Leadwire $35.95
E70390 R660-20 20’ Leadwire $39.95
Isspro Heavy Duty Instruments
8 e-Power Instruments 1-800-667-8001 www.e-powerinstruments.com
Isspro 2 1/16” Electric Gauges, Senders |
Order No. Mfg. PN Description Price
Electric Oil Pressure GaugesE67010 R8620 Oil Pressure 0-80 psi $47.95
E67020 R9020 Oil Pressure 0-80 psi/0-550 kPA $47.95
E67030 R8621 Oil Pressure 0-100 psi $47.95
E67040 R9021 Oil Pressure 0-100 psi/0-700 kPA $47.95
Electric Air Pressure GaugesE67050 R9023 Air Pressure 0-150 psi/-1030 kPA $47.95
E67055 R8723 Air Pressure 0-150 psi $47.95
Electric Pressure SendersStandard pressure sender has one terminal and is designed to drive one gauge. The ground connection is made through the body of the sender.
E68010 R8916 Pressure Sender 1/8” NPTF 0-80 psi $47.95
E68030 R8917 Pressure Sender 1/8” NPTF 0-100 psi $47.95
E68020 R8919 Pressure Sender 1/8” NPTF 0-150 psi $47.95
3 Black bezel3 2 1/16” mounting hole3 12V DC light kit and mounting hardware included3 90° Sweep
Electrical gauges are designed with a silicone dampened air core movement A coil of wire is wound around a bobbin with a center magnet When an electrical current is applied to the coil, the gauge pointer moves to the resulting electrical field These gauges require a sender; the senders must match the gauge type code and range Also required for an application is wiring with electrical ring terminals that provide 12V DC and ground English/metric gauges have an orange pointer; English only have a white pointer
E67040 Oil Pressure0-100 psi/0-700 kPA
E67050 Air Pressure0-150 psi/0-1030 kPA
E67055 Air Pressure 0-150 psi
E67010 Oil Pressure 0-80 psi
E67020 Oil Pressure 0-80 psi/0-550 kPA
E67030 Oil Pressure 0-100 psi
E68030 Pressure Sender 1/8” NPTF, 0-100 psi
Electric Water Temperature GaugesE69010 R8650 Water Temperature 100-240°F $47.95
E69020 R9050 Water Temperature 100-240°F/40-115°C $47.95
Electric Water Temperature SendersStandard temperature sender has one terminal for the gauge and grounding is through the body of the sender.
E69210 R8920 Temperature Sender ½” NPTF 100-240°F $35.95
E69220 R8921 Temperature Sender 3/8” NPTF 100-240°F $35.95
E69230 R8922 Temperature Sender ¼” NPTF 100-240°F $35.95
E69240 R8923 Temperature Sender 1/8” NPTF 100-240°F $35.95
E69010 Water Temperature 100-240°F
E69020 Water Temperature 100-240°F/40-115°C
E69210 Temperature Sender½” NPTF, 100-240°F
Isspro Heavy Duty Instruments
e-mail: [email protected] 1-800-667-8001 e-Power Instruments �
Flee
t M
anag
emen
tM
urph
y Sy
stem
sIS
SPRO
Gau
ges
Elec
trica
lSp
ecia
lty I
nstru
men
ts
Order No. Mfg. PN Description Price
Electric Oil Temperature GaugesE69030 R8654 Oil Temperature 140-320°F $47.95
E69040 R9054 Oil Temperature 140-320°F/60-160°C $47.95
Electric Oil Temperature SendersE69280 R8959 Temperature Sender 1/8” NPTF 140-320°F $23.95
E69250 R8960 Temperature Sender ¼” NPTF 140-320°F $23.95
E69260 R8961 Temperature Sender 3/8” NPTF 140-320°F $23.95
E69270 R8962 Temperature Sender ½” NPTF 140-320°F $23.95
Ammeter GaugesE70760 R9066 60-0-60 Ammeter $47.95
E70770 R9067 100-0-100 Ammeter $47.95
Voltmeter GaugesE70710 R9080 2 1/16”, 12V Voltmeter $47.95
E70720 R8661 2 1/16”, 24V Voltmeter $47.95
2 1/16” HourmetersHourmeters are connected in parallel with the electrical equipment or machine where operation time is to be recorded. All hourmeters feature fully insulated plastic case, clamp clip for quick mounting, square or round panel cutout insertion. Counts up to 99,999 hours. Simply apply a battery voltage between 8 and 40V DC and hourmeter starts counting. Digital hourmeter is state-of-the-art design in the most compact package available. Complete with solid-state memory that does not lose its readings even when the voltage is removed. Operates on 9-39V DC. Black bezel.
E84050 R8861 Round DC Hourmeter $59.95
E84110 R8865 Digital Hourmeter $59.95
Rectangular Mini HourmeterE84100 R8864HV Rectangular DC Hourmeter $59.95
E69030 Oil Temperature140-320°F
E69040 Oil Temperature140-320°F/60-160°C
E69270 Temperature Sender½” NPTF 140-320°F
E70720 Voltmeter24V
E70760 Ammeter60-0-60
E70770 Ammeter100-0-100
E70710 Voltmeter 12V
Ordering information:n These gauges require a sender, the senders must match the gauge type code and range
Ammeters and voltmeters do not require a sender n Also required for an application is wiring and ring terminals n For 24V DC NG systems, a voltage reducer must be used if you do not have a 12 volt
system, with the exceptions of ammeters, hourmeters and voltmeters Voltage reducers are listed on Page 13
E84100 Rectangular DC Hourmeter
E84110 Digital Hourmeter
E84050 Round DC Hourmeter
Isspro Heavy Duty Instruments
10 e-Power Instruments 1-800-667-8001 www.e-powerinstruments.com
E67510 Oil Pressure5 - 80 psi
E67520 Oil Pressure5 - 100 psi
E67550 Drive Oil Pressure 25 - 400 psi
E67600 Air Pressure10 - 150 psi
E67610 Dual Air Pressure 0 - 150 psi
E67700 Vacuum0 - 30” Hg
E94310 Axle Load0 - 45 x 1000
E69550 Oil Temperature140 - 325°F
E69560 Oil Temperature140 - 325°F/60 - 160°C
E67650 Manifold Pressure2 - 30 psi
E67660 Manifold Pressure 1 - 15 psi
E69510/E69520 Water Temperature 100 - 265°F
Isspro 2 1/16” Mechanical Gauges |Mechanical gauges sense pressure or temperature through tubing that transmits the pressure, vacuum, or temperature Electrical power is required for operation of night lighting only Senders are not needed for mechanical gauges All gauges are 2 1/16” mounting hole, black bezel
Order No. Mfg. PN Description Price
Mechanical Oil Pressure GaugesE67510 R9000 Oil Pressure 5-80 psi/35-550 kPA $59.95
E67520 R9001 Oil Pressure 5-100 psi/35-700 kPA $59.95
E67550 R9008 Drive Oil Pressure 25-400 psi $69.55
Air Pressure & Dual Air Pressure GaugesE67600 R9005 Air Pressure 10-150 psi/100-1050 kPA $69.95
E67610 R8606 Dual Air Pressure 0-150 psi $143.95
Manifold Pressure GaugesE67650 R9010 Manifold Pressure 2-30 psi/13-207 kPA $69.95
E67660 R8611 Manifold Pressure 1-15 psi $69.95
Vacuum GaugeE67700 R8675 Vacuum 0-30” Hg $69.95
Axle Load GaugesE94310 R8821 0-45 x 1000 Axle Load $83.95
E94320 R8820 0-55 x 1000 Axle Load $83.95
Pressure Tubing KitsE66950 R7110 Oil Pressure Tubing Kit 1/8” NPT 6’ $15.95
E66960 R7172 Oil Pressure Tubing Kit 1/8” NPT 16’ $19.95
E66970 R7111 Vacuum Tubing Kit 1/8” NPT 6’ $15.95
Mechanical Water Temperature GaugesE69510 R9034 100-265°F/40-130°C 4’ Capillary $83.95
E69520 R9030 100-265°F/40-130°C 6’ Capillary $83.95
Mechanical Oil Temperature GaugesE69550 R8636 140-325°F 12’ Capillary $107.95
E69560 R9036 140-325°F/60-160°C 12’ Capillary $107.95
Isspro Heavy Duty Instruments
e-mail: [email protected] 1-800-667-8001 e-Power Instruments 11
Flee
t M
anag
emen
tM
urph
y Sy
stem
sIS
SPRO
Gau
ges
Elec
trica
lSp
ecia
lty I
nstru
men
ts
E34530 3” Single Hole
E34550 3 3/8” Single Hole
E34560 3 3/8” Mounting Cup
E34540 2 1/16” Mounting Cup
Order No. Mfg. PN Description Price
Mounting Hardware for Standard GaugesAll mounting brackets and cups are black and available for the 2 1/16”, 3”, and 3 3/8” gauges.
E34510 R7610 2 1/16” Single Hole Bracket $ 9.95
E34520 R7620 2 1/16” Dual Hole Bracket $10.95
E34540 R7602 2 1/16” Mounting Cup $41.95
E34530 R7608 3” Single Hole Bracket $35.95
E34550 R7680 3 3/8” Single Hole Bracket $27.95
E34560 R7601B 3 3/8” Mounting Cup $47.95
E34520 2 1/16” Dual Hole
E34510 2 1/16” Single Hole
Order No. Make/Year Pillar/Pod Price
Mounting Hardware for 2 1/16” Standard GaugesISS-R7700 Ford F series 92-97 dual pillar $129.95
ISS-R7701 Ford F series 92-97 triple pillar $129.95
ISS-R7702 Ford F series 98-01 & F-150 97 dual pillar $129.95
ISS-R7703 Ford F series 98-01 & F-150 97 triple pillar $137.95
ISS-R7704 Dodge Ram 94-97 dual pod $129.95
ISS-R7705 Chevy GM full size 88-94 dual pod $129.95
ISS-R77000 Dodge Ram 98-01 & Ram 2500/3500 02 dual pillar $129.95
ISS-R77001 Ford F series 02 & F-150 03 dual pillar $129.95
ISS-R77002 Dodge Ram w/speaker 98-02 & Ram 2500/3500 02 dual pillar $129.95
ISS-R77003 Chevy GM full size 00-04 dual pillar $129.95
ISS-R77004 Chevy GM full size w/ speaker 03-04 dual pillar $137.95
ISS-R77005 Chevy GM full size 00-04 triple pillar $129.95
ISS-R77006 Ford Super Duty 99-04 quadruple pillar $163.95
ISS-R77007 Dodge Ram w/speaker 98-02 triple pillar $137.95
ISS-R77008 Dodge Ram 94-97 triple pillar $137.95
ISS-R77009 Dodge Ram 03-04 dual pillar, lt gray $163.95
ISS-R77010 Dodge Ram 98-01 triple pillar $137.95
ISS-R77011 Dodge Ram 03-04 triple pillar, lt gray $163.95
ISS-R7706 Ford F series 87-97 dual pod $74.95
ISS-R7707 Ford Super Duty 99-04 triple pillar $137.95
ISS-R7708 Ford Super Duty 99-04 dual pod $137.95
Isspro Specialty Products |
Isspro Heavy Duty Instruments
ISS-R77001 Dual PillarFord F series 02 & F-150 03
ISS-R77010 Dual PodDodge Ram 03-04
ISS-R77011 Triple PillarDodge Ram 03-04
1� e-Power Instruments 1-800-667-8001 www.e-powerinstruments.com
E18800 Turbo Temperature Module
E21041 Shutdown Kit 24V
E81880 Temperature Switch250°F NO ¼” NPTF
E81660 Pressure SwitchNO 4 psi
E81680 Pressure SwitchNC 15 psi
E81690 Dual Pressure SwitchNO/NC 4 psi
E81830 Temperature Switch200°F NO ½” NPTF
E81840 Temperature Switch212°F NO ½” NPTF
E81670 Pressure SwitchNC 8 psi
Order No. Mfg. PN Description Price
Oil & Air Pressure SwitchesThese switches are designed with normally open (NO) or normally closed (NC) contacts. When the set limit is reached, the contacts will close or open to ground completing circuit. The dual pressure switch has two sets of isolated contacts—one set normally open (NO) and one set normally closed (NC). 1/8” NPTF on all pressure switches.
E81660 R7504 Pressure Switch NO 4 psi $47.95
E81670 R7508 Pressure Switch NC 8 psi $47.95
E81680 R364K Pressure Switch NC 15 psi $47.95
E81690 R4012-4 Pressure Switch Dual NO/NC 4 psi $47.95
Temperature SwitchesAll temperature switches are normally open (NO) and have a one Amp capacity. Rugged and reliable for indicator lights, relays, hourmeters, alarms, etc.
E81830 R363F Temperature Switch 200°F NO ½” NPTF $47.95
E81840 R363B Temperature Switch 212°F NO ½” NPTF $47.95
E81870 R363G Temperature Switch 225°F NO ½” NPTF $47.95
E81880 R363A Temperature Switch 250°F NO ¼” NPTF $47.95
Turbo Temperature ModuleThis module can help eliminate early turbo charger failure. When the engine ignition is turned off, the turbo temperature monitor takes over and idles down until a safe exhaust temperature is reached. At that point the engine automatically stops. By shutting down in a safe, cool condition, deposits are reduced and turbo life is increased. A leadwire and thermocouple are needed for a functioning system. Your existing pyrometer system can be used or a new leadwire and thermocouple can be installed. See Page 7.
E18800 R4130 Turbo Temperature Monitor $299.95
Engine Shutdown without GaugesThis shutdown kit is recommended if your equipment has factory-installed instruments making the gauges in a shutdown panel redundant, or if the equipment articulation is such that mechani-cal installation is physically impossible. The Isspro shutdown kit is a solid state shutdown with delay. The relay is built to handle heavy switch loads such as fuel solenoids. Includes shutdown box (30 second delay), low water probe, low oil pressure switch (7-9 psi), high water temperature switch (225°F), warning label, warning light, and buzzer with 15 second delay for engine start.
E21040 R4020-12V Shutdown Kit 12V $299.95
E21041 R4020-24V Shutdown Kit 24V $359.95
E81870 Temperature Switch225°F NO ½” NPTF
Isspro Specialty Products |
Isspro Heavy Duty Instruments
e-mail: [email protected] 1-800-667-8001 e-Power Instruments 1�
Flee
t M
anag
emen
tM
urph
y Sy
stem
sIS
SPRO
Gau
ges
Elec
trica
lSp
ecia
lty I
nstru
men
ts
Specialty Products |
These Isspro mechanical tachometers with hourmeter are cable driven, rug-ged and reliable for new installations or replacement applications. Requires a steel cable driven by the diesel engine fuel pump. Black bezel with white pointer, 12V DC complete with light and mounting hardware. Available in .5:1 and 1:1 ratio.
Order No. Mfg. PN Description Price
24 to 12V Gauge Voltage ReducerThe voltage reducers is designed to allow the use of 12V DC Isspro gauges in 24V DC vehicles.It is not designed for light bulb applications.
E70640 R7934 24V Voltage Reducer $22.95
E70640 24V to 12VGauge Voltage Reducer
Interconnect HarnessesFor installation of Isspro speedometers and tachometers in original electronic equipment applications.
E50650 R7032Peterbilt PN’s: 17-03552-001, 17-03552-002 for E02050.Kenworth PN’s: 3k tach with or without hourmeter for E02050. $25.95
E50651 R7034 Peterbilt PN’s: 17-03183 for E02050. $25.95
E50652 R7036 Navistar PN’s: 1682071C91 for Isspro, unit E02250. $25.95
E50653 R7038 Kenworth K152-473-1 for Isspro unit E02260. $32.95
Buzz Light AlarmE50550 4112-RC 12V Buzz Light $47.95
E50555 4124-RC 24V Buzz Light $47.95
Audible AlarmA two-stage audible alarm which can be used as a steady tone or a pulsed tone. Unit has 3 terminals, operates on 6-28V DC. Requires a 1 1/8” hole size.
E29710 SAH-A Audible Alarm $47.95
Pilot Light AlarmThis heavy-duty 12V DC bright light assembly has a removable red lens for easy lamp replace-ment. Easy to see in bright conditions. Requires a ¾” hole for mounting.
E50560 PL-118-RC Pilot Light $29.95
Universal Gauge Lighting, 12 - 24V DC
E50540 R7093Gauge Light Kit, 2 wire, 9 /16” & 5/8” mounting diameter.For a 12V DC, GE161 or 24V DC GE656 Bulb. $6.95
E50541 R7094Wedge Base Light, twist in assembly. For a 12V DC, GE161 or 24V DC GE656 Bulb $4.95
E50542 GE161 12V DC Bulb $2.95
E50543 GE656 24V DC Bulb $2.95
E50550 Buzz Light Alarm
E29710 Audible AlarmE50560 Pilot Light Alarm
Interconnect Harness
R7093 Gauge Light Kit
R7094 Wedge Base Light
Isspro Heavy Duty Instruments
1� e-Power Instruments 1-800-667-8001 www.e-powerinstruments.com
E04700 0-3000 rpmTachometer
E04200 0-2000 rpmTachometer
E04300 0-3000 rpmTachometer
E04400 0-4000 rpmTachometer
E04500 0-5000 rpmTachometer
E04600 0-6000 rpmTachometer
E06120/E061300-3500 rpm Mechanical
Tachometers |
E04800 0-4000 rpmTachometer
E04050 0-500 rpmTachometer
E04050 0-500 rpmMulti-Tooth Sprocket
E15770 Sensor Kit E15720 Magnet Kit
3 3/8” Mechanical Tachometers with HourmeterThese Isspro mechanical tachometers with hourmeter are cable driven, rugged and reliable for new installations or replacement applications. Requires a steel cable driven by the diesel engine fuel pump. Black bezel with white pointer, 12V DC complete with light and mounting hardware. Available in .5:1 and 1:1 ratio.
E06120 0 - 3500 rpm Mechanical Tachometer .5:1 ratio $149.95
E06130 0 - 3500 rpm Mechanical Tachometer 1:1 ratio $149.95
3 3/8” Electronic Tachometer KitsDeveloped to provide users with an easy-to-read instrument that accurately measures rpm. Can be used on engine, fan, pump, conveyor, PTO, etc. Standard 3 3/8” gauge, with rear terminal strip, 12V DC operation. All kits include an Isspro 3 3/8” black bezel gauge, steel mounting case, bracket, E15770 sensor kit, and installation instructions.
E04200 0 - 2000 rpm Tachometer Kit $275.95
E04300 0 - 3000 rpm Tachometer Kit $275.95
E04400 0 - 4000 rpm Tachometer Kit $2275.95
E04500 0 - 5000 rpm Tachometer Kit $275.95
E04600 0 - 6000 rpm Tachometer Kit $275.95
3 3/8” Electronic Tachometer Kits with HourmeterUniversal electronic tachometer kit with hourmeter. For all 12V DC systems negative ground. Excellent for replacing obsolete mechanical tachometer systems. Kit includes an Isspro 3 3/8” black bezel gauge with hourmeter, E15770 sensor kit, and installation instructions.
E04700 0 - 3000 rpm Tachometer Kit $275.95
E04800 0 - 4000 rpm Tachometer Kit $275.95
3 3/8” Low rpm Electronic Tachometer Kit with Mounting CupThis kit will allow you to monitor slower rotating shafts consistently. Range 0-500 rpm. Kit includes 3 3/8” Isspro tachometer 0-500 rpm, multi-tooth sprocket with 1 5/8” weld-on-hub hole, rear terminal strip for easy wiring, steel mounting cup open mounted for 12V DC.
E04050 0 - 500 rpm Tachometer Kit $319.95
Sensor Kit, Replacement Magnet KitKit includes sensor pickup, 2 magnets, and epoxy. Mount the two magnets to front of engine pulley and sensor to a pan bolt.
E15770 Sensor Kit $69.95
E15720 Replacement Magnet kit with Epoxy $35.95
Isspro Heavy Duty Instruments
e-mail: [email protected] 1-800-667-8001 e-Power Instruments 1�
Flee
t M
anag
emen
tM
urph
y Sy
stem
sIS
SPRO
Gau
ges
Elec
trica
lSp
ecia
lty I
nstru
men
ts
Tachometers |
E05510 0-4000 rpm 2 1/16” Tachometer
E05550 0-5000 rpm 2 1/16” Tachometer
E05710 0-5000 rpm2 1/16” Ignition Tachometer
E05810 0-4000 rpm 3 3/8” Ignition Tachometer
E05610 0-6000 rpm 2 1/16” Tachometer
E02050 0-3000 rpm 3 3/8” Programmable Tachometer
E02200 0-4000 rpm 3 3/8” Programmable Tachometer
E05820 0-6000 rpm 3 3/8” Ignition Tachometer
2 1/16” Electronic Tachometers
These Isspro tachometers are used in small engine applications such as the 6.2/6.5 liter GM Diesel, 6.9/7.3 Ford Diesel and Dodge/Cummins. All tachometers use the E15770 Sensor Kit (sold separately); 12V DC only, black bezel with red-orange pointers, complete with light and mounting hardware. To install sensor, mount two magnets to front engine pulley and sensor to pan bolt.
E05510 2 1/16”, 0 - 4000 rpm Tachometer Kit $189.95
E05550 2 1/16”, 0 - 5000 rpm Tachometer Kit $189.95
E05610 2 1/16”, 0 - 6000 rpm Tachometer Kit $189.95
Electronic Programmable TachometersThese Isspro programmable tachometers accept signals from pulse generators, magnetic pickups, and alternator taps (sold separately on Page 18). Black bezel, 12 or 24V DC, complete with 12V bulb and mounting hardware.
E02050 3 3/8”, 0 - 3000 rpm Programmable Tachometer with Hourmeter $235.95
E02200 3 3/8”, 0 - 4000 rpm Programmable Tachometer with Hourmeter $235.95
E02250 4 5/8”, 0 - 3500 rpm Programmable Tachometer $329.95
E02260 5”, 0 - 3000 rpm Programmable Tachometer $329.95
Electronic Ignition Tachometers (Hourmeters)These Isspro tachometers are designed for most standard ignition systems that have a coil-type ignition or tach output connection. For 4, 6, or 8 cylinder applications. 12 or 24V DC, operation on 3 3/8” aircore units, 12V DC only on 2 1/16” units. All models have a black bezel with white pointer, complete with light and mounting hardware. Models E05810 and E05820 have hourmeters.
E05710 2 1/16”, 0 - 5000 rpm Tachometer $189.95
E05810 3 3/8”, 0 - 4000 rpm Tachometer with Hourmeter $235.95
E05820 3 3/8”, 0 - 6000 rpm Tachometer with Hourmeter $235.95
Digital Photo/Contact TachometerThis multi-function, one instrument combination Photo Tach (rpm) and Contact Tach (rpm, m/min, ft/min) gives you a digital readout with a range from 0.5 to 100,000 rpm. The last value/max., value/min., value will be automatically stored in memory and can be obtained by pressing MEMORY CALL BUTTON. Highly visible, LCD display gives exact rpm with no guessing or errors. The use of durable long-lasting components, including a strong, light-weight ABS plastic housing assures maintenance free performance for many years. The detecting distance is 2” to 6” with a typical maximum of 12”, depending on ambient light. The accuracy is ± 0.05% + 1 digit. Includes carrying case, 24” reflective tape, rpm adapter (cone), rpm adapter (funnel), surface speed wheel, and operation manual. Uses 2 AA batteries (not included). One-year warranty.
E86580 Photo/Contact Tachometer $389.95
E86570 24” Reflective Tape $ 7.95
E86580 Photo/ContactTachometer
Isspro Heavy Duty Instruments
16 e-Power Instruments 1-800-667-8001 www.e-powerinstruments.com
Speedometers - Accessories |
E07015 Speedometer 30 mph/50 kph
E07010 Speedometer 140 kph
E07070 Speedometer 80 mph/130 kph
E15430 Sensor 2”
E18520 Ratio Converter
E15530 Sensor 2.5”
3 3/8” Programmable SpeedometersProgrammable 3 3/8” speedometers with odometer are driven electronically from either a pulse generator or magnetic pickup. Functions over a broad range of applications by using the dip switches for field programmability. For replacement applications, they will accept signals from most sensors or generators in use.
E07010 Speedometer 140 kph $259.95
E07015 Speedometer 30 mph/50 kph $259.95
E07070 Speedometer 80 mph/130 kph $259.95
Digital Ratio ConverterThis digital pulse ratio converter scales an incoming frequency by a fixed ratio. It is intended for functions such as speedometer or tachometer adjustment. Accepts pulses of a minimum amplitude 0.8V. Produces 4V bipolar or unipolar output pulses. Programmed by a bank of 8 DIP switches and a removable jumper for selecting a high or low range.
E18520 Ratio Converter $155.95
Magnetic SensorsA permanent magnet built into the sensor provides a magnetic field at the base of the sen-sor. As each tooth of a signal gear or a slot in a rotating sensor disc passes through the magnetic field, a signal (voltage pulse) is generated.
E15430 Magnetic Sensor 3/4” - 16 thread, 2” long $64.95
E15530 Magnetic Sensor 3/4” - 16 thread, 2.5” long $64.95
Pulse Distribution ModuleThis module solves problems caused by attaching multiple instruments to one magnetic speed sender or pulse generator. It accepts your existing speedometer or tachometer signal and will boost and isolate it into five separate outputs. These can be used to drive speedometers, on-board computers, cruise control, taximeters and other devices that use the signal without weak or intermittent signals and interference. 12V DC. For 24 volt order
E18510 Pulse Distribution Module $119.95
Electronic Ratio AdapterThis device helps obtain speedometer accuracy affected by tire size and rear end ratio changes. Instructions help you calculate percentage of increase or decrease necessary to correct the speedometer accuracy. DIP switches are then set to adjust the signal and calibrate the speedometer. Wiring is 12V DC keyed on/off, ground, input signal from magnetic sensor or signal generator and output signal to the speedometer.
E18515 Electronic Ratio Adapter $325.95
E18510 Pulse Distribution Module E18515 Electronic Ratio Adapter
Isspro Heavy Duty Instruments
e-mail: [email protected] 1-800-667-8001 e-Power Instruments 17
Flee
t M
anag
emen
tM
urph
y Sy
stem
sIS
SPRO
Gau
ges
Elec
trica
lSp
ecia
lty I
nstru
men
ts
Pulse Generators (30 Pulses/Rev) |
E08050Pulse Generator
E08100 Pulse Generator with Feed Through
E08540 .104” sq. - Male $12.95
E08520 .187” Tang - Male $12.95
E08530 .203” Tang - Male $12.95
E08550 .203” Tang - Female $12.95
E08560 .104” sq. - Female $12.95 E08570 .152” Tang - Female $12.95
E08590 .150” sq. - Male $12.95
E08580 .187” Tang - Female $12.95
The pulse generator type sender is used when converting a mechanical speedometer system to an electronic speedometer system. 30 Pulses/Rev, 7/8” – 18 thread.
E08050 Pulse Generator (One male drive tip required) $125.95
E08100 Pulse Generator with Feed Through $185.95
E08510 .152” Tang - Male $12.95
Drive Tips (For the 30 Pulses/Rev Generator) |
Microprocessor Product InformationA quick comparison of analog and microprocessor gauges:Analog Positives: Microprocessor Positives:3 Can be modified for infinite variations. 3 No need to adjust.3 Can be adjusted so that two gauges are 3 Very stable over time and temperature. identical (tachometer only). 3 Faster response.3 No RF noise generated. 3 Handles larger range of pulses per mile. 3 Very accurate odometer and hourmeter information.Analog Negatives: Microprocessor Negatives:3 Limited in high pulses per mile. 3 Generates RF interference. 3 Limited in lower pulses per mile.
Isspro Heavy Duty Instruments
18 e-Power Instruments 1-800-667-8001 www.e-powerinstruments.com
Pulse Generators |
E08010 Pulse Generator $95.957/8” – 18 and 5/8” - 18 male thread
E08020 Pulse Generator $95.955/8” – 18 male thread
E08030 Pulse Generator $95.955/8” – 18 male thread both sides
E08910 .187” dia. to .104” sq. $14.95 E08920 .156” dia. to .104” sq. $14.95
E08720 .104” sq. to .104” sq. $5.95 E08740 .156” dia. to .104” sq. $5.95
Pulse Generator Drive Tipsfor use with the E08380
2” Coupling Adapter
Pulse Generator Drive Tipsfor use with the E08390 1 37” Coupling Adapter
E08930 .203” dia. to .104” sq. $14.95
E08380 Adapter 2” length, $44.955/8” to 7/8” – 18 thread
E08390 Adapter 1.37” length, $34.955/8” to 7/8” – 18 thread
This style of pulse generator has 8 Pulses/Rev
Call us!Did you know that
e-Power can manufacture speedo and tachometer cables? Call
1-800-667-8001 for details.
Isspro Heavy Duty Instruments
e-mail: [email protected] 1-800-667-8001 e-Power Instruments 1�
Flee
t M
anag
emen
tM
urph
y Sy
stem
sIS
SPRO
Gau
ges
Elec
trica
lSp
ecia
lty I
nstru
men
ts
E08830 .172” dia. to .124” sq. $6.95
E08820 .172” dia. to .150” sq. $5.95 E08870 .172” dia. to .187” sq. $6.95 E08840 .172” dia. to .156” dia. $5.95
E08850 .172” dia. to .187” dia. $5.95 E08860 .172” dia. to .203” dia. $5.95
DRIVE TIPS
E09010 Tang to .104” sq. $6.95
E09020 Tang to .152” sq. $6.95 E09030 Tang to .187” sq. $6.95 E09040 Tang to .152” pin $6.95
E09050 Tang to .187” pin $6.95 E09060 Tang to .203” pin $14.95 E09070 .104” sq. to .203” pin $6.95
E08230 700 Series Straight-Thru $ 97.95 E08240 600 Series Offset $ 97.95 E08251 800 Series Offset $ 97.95
E08252 800 Series Straight-Thru $ 97.95
E08253 800 Series Dual $124.95Straight-thru output is always 1:1 ratio. Offset output is the selected ratio
E08254 800 Series Dual $124.95Both outputs are the same selected ratio
Output rotates same direction as input on all models. All models are available in 250 different ratios. Please specify input and output drive tip sizes when ordering.
E08810 .172” dia. to .104” sq. $5.95
Ratio Adapters |
Drive Tips
Isspro Heavy Duty Instruments
E08910 .187” dia. to .104” sq. $14.95 E08920 .156” dia. to .104” sq. $14.95
E08670 .105” internal sq. to .104” sq. $ 5.95
E08680 .156” dia. to .203” dia. $12.95
E08690 .105” internal sq. to .104” sq. $ 5.95
E08620 .150” dia. to .104” sq. $ 9.95
E08710 .150” dia. to .104” sq. $ 5.95
E08720 .104” sq. to .104” sq. $ 5.95
E08730 .156” dia. to .187” internal sq. $ 5.95
E08640 .203” dia. to .187” dia. $ 5.95
E08660 .187” dia. to .187” dia. $ 5.95
E08740 .156” dia. to .104” sq. $ 5.95
E08610 .156” dia. to .156” dia. $ 6.95
E08650 .187” dia. to .156” dia. $ 6.95
1 3/4”
1
1 5/16”
1 5/16”
1 9/32”
1
7/8”
1 1/8”
1 6/16”
1 7/16”
1 1/8”
1 1/8”
PHOTO NOT AVAILABLE
E08930 .203” dia. to .104” sq. $14.95
E08750 .105” internal sq. to .104” sq. $12.95
9/10”
Adapter Keys |
WarrantyIsspro does warranty its products against defects and workmanship. This warranty shall extend from the date of purchase as follows:
3 Analog gauges, 2 years. 3All other Isspro products, 1 year.
Isspro Heavy Duty Instruments
�0 e-Power Instruments 1-800-667-8001 www.e-powerinstruments.com
