Embed Size (px)
Citation preview
10 Enterprise Avenue,
Clifton Park, New York 12065
This is an original drawing created by Creatacor Inc. It is submitted for your personal use, in connection with a project being prepared
for you by Creatacor Inc. This design is to remain the exclusive property of Creatacor Inc. under the agreement that the use of this
design in its entirety or any part will not be reproduced, copied, lent or used for any purpose without written consent from Creatacor Inc.
DATE:
PROJECT:
JOB #:
CLIENT:
MANAGER:
DRAWING NAME:
EMAIL: [email protected]
TEL: 518.664.8750
FAX: 518.664.8667
DRAWING TYPE:
DRAFTSPERSON:
PACKAGE:
TITLE:
FILE:
OF
2
1
3
4
REVISION DATES:
M1
MATERIALS:
3/4" BAHAMA PLY
M2
M3
M4
M5
M6
M7
M8
F1
FINISHES/LAMINATES:
STOCK BLACK LINEX FINISH
F2
F3
F4
F5
F6
F7
F8
H1
HARDWARE:
GALV. IRON SLIP-ON RAILING, HVY DTY FLANGE, MCM #4936T187
H2
H3
H4
H5
H6
H7
H8
06/20/2016 - AS BUILTS
6
5
7
8
ZINC-PLT STEEL TEE NUT INSERTS, 3/8-16 SIZE, MCM #90975A031
3/8" BAHAMA PLY
1/4" BEND BOARD
3/4" KING STARBOARD
ALUM. PIPE, 3/4" PIPE SIZE, SCHED. 40
BLACK LAMINATE WILSONART POSTFORM 1595
GRAPHIC WRAP
06/15/2016
FABRICATION
MODEL RISERS -
OVERVIEW
COMIC-CON 2016
1160110
LEGO SYSTEMS, INC.
HENAGHAN
LP
MR-1
1 3
MODEL_RISERS.DWG
N.T.S.
1
MR-1
MODEL RISERS - ISOMETRICS
4
MR-1
5
MR-1
120°"
56"
FRONT GRAPHIC
62
5
16
"
REAR GRAPHIC
Ø60"
60"
4
1
8
"
92"
96
1
8
"
4
1
8
"
92"
96
1
8
"
60"
1" = 1'-0"
2
MR-1
MODEL RISERS - TOP VIEW
MAKE 4
1" = 1'-0"
4
MR-1
MODEL RISERS - FRONT VIEW
MAKE 4 1" = 1'-0"
5
MR-1
MODEL RISERS - SIDE VIEW
MAKE 4
92"
56"
3/4" = 1'-0"
3
MR-1
MODEL RISERS - GRAPHIC LAYOUT - FLATTENED VIEW
FRONT REAR
92"
62
5
16
"
F2
F1 PLATFORM (TOP & SIDES)
WALL (ALL SIDES)
1 NEW LABELS
1 NEW LABELS
10 Enterprise Avenue,
Clifton Park, New York 12065
This is an original drawing created by Creatacor Inc. It is submitted for your personal use, in connection with a project being prepared
for you by Creatacor Inc. This design is to remain the exclusive property of Creatacor Inc. under the agreement that the use of this
design in its entirety or any part will not be reproduced, copied, lent or used for any purpose without written consent from Creatacor Inc.
DATE:
PROJECT:
JOB #:
CLIENT:
MANAGER:
DRAWING NAME:
EMAIL: [email protected]
TEL: 518.664.8750
FAX: 518.664.8667
DRAWING TYPE:
DRAFTSPERSON:
PACKAGE:
TITLE:
FILE:
OF
2
1
3
4
REVISION DATES:
M1
MATERIALS:
3/4" BAHAMA PLY
M2
M3
M4
M5
M6
M7
M8
F1
FINISHES/LAMINATES:
STOCK BLACK LINEX FINISH
F2
F3
F4
F5
F6
F7
F8
H1
HARDWARE:
GALV. IRON SLIP-ON RAILING, HVY DTY FLANGE, MCM #4936T187
H2
H3
H4
H5
H6
H7
H8
06/20/2016 - AS BUILTS
6
5
7
8
ZINC-PLT STEEL TEE NUT INSERTS, 3/8-16 SIZE, MCM #90975A031
3/8" BAHAMA PLY
1/4" BEND BOARD
3/4" KING STARBOARD
ALUM. PIPE, 3/4" PIPE SIZE, SCHED. 40
BLACK LAMINATE WILSONART POSTFORM 1595
GRAPHIC WRAP
06/15/2016
FABRICATION
MODEL RISERS -
FRAMING DETAILS
COMIC-CON 2016
1160110
LEGO SYSTEMS, INC.
HENAGHAN
LP
MR-2
2 3
MODEL_RISERS.DWG
2
MR-2
3
MR-2
Ø60"
60"
4
1
8
"
92"
96
1
8
"
4
1
8
"
92"
96
1
8
"
60"
1" = 1'-0"
1
MR-2
MODEL RISERS - TOP VIEW
WALL SKIN & PLATFORM LID REMOVED
1" = 1'-0"
2
MR-2
MODEL RISERS - FRONT VIEW
WALL SKIN REMOVED 1" = 1'-0"
3
MR-2
MODEL RISERS - SIDE VIEW
WALL SKIN REMOVED
4
MR-2
4
MR-2
Ø60"
1" = 1'-0"
4
MR-2
MODEL RISERS - PLATFORM DETAILS
ISOMETRICS FROM ABOVE
FRONT SIDE
TOP
30"
30"
60"
4
1
8
"
60"
4
1
8
"
USE BOLTS & TEE-NUTS TO ATTACH FITTINGS
TO UNDERSIDE OF PLATFORM LID
SCREW SQUARE FRAME TO UNDERSIDE OF PLATFORM LID -
DO NOT GLUE TO LID!!!! -
FRAME MAY SHIFT IN FIELD TO ACCOMMODATE LEGO MODEL HARDWARE
5
MR-2
5
MR-2
1" = 1'-0"
5
MR-2
MODEL RISERS - WALL DETAILS
FRONT SIDE
TOP
56"
62
5
16
"
2
1
2
"
3"
51
1
2
"
51
1
16
"
24"
24"
24"
20"
92"
CENTER
PIPE
96"
4"
SIDE
PIPE
52"
GLUE
3
4
PIPE (1" OD)
INSIDE WALL FRAMING
CENTER PIPE AS WIRE CHASE
IF NEEDED
16"
92"
ISOMETRICS
ISOMETRICS FROM BELOW
1
4
" ROUND-OVER AROUND
EDGES FOR LINEX FINISH
10 Enterprise Avenue,
Clifton Park, New York 12065
This is an original drawing created by Creatacor Inc. It is submitted for your personal use, in connection with a project being prepared
for you by Creatacor Inc. This design is to remain the exclusive property of Creatacor Inc. under the agreement that the use of this
design in its entirety or any part will not be reproduced, copied, lent or used for any purpose without written consent from Creatacor Inc.
DATE:
PROJECT:
JOB #:
CLIENT:
MANAGER:
DRAWING NAME:
EMAIL: [email protected]
TEL: 518.664.8750
FAX: 518.664.8667
DRAWING TYPE:
DRAFTSPERSON:
PACKAGE:
TITLE:
FILE:
OF
2
1
3
4
REVISION DATES:
M1
MATERIALS:
3/4" BAHAMA PLY
M2
M3
M4
M5
M6
M7
M8
F1
FINISHES/LAMINATES:
STOCK BLACK LINEX FINISH
F2
F3
F4
F5
F6
F7
F8
H1
HARDWARE:
GALV. IRON SLIP-ON RAILING, HVY DTY FLANGE, MCM #4936T187
H2
H3
H4
H5
H6
H7
H8
06/20/2016 - AS BUILTS
6
5
7
8
ZINC-PLT STEEL TEE NUT INSERTS, 3/8-16 SIZE, MCM #90975A031
3/8" BAHAMA PLY
1/4" BEND BOARD
3/4" KING STARBOARD
ALUM. PIPE, 3/4" PIPE SIZE, SCHED. 40
BLACK LAMINATE WILSONART POSTFORM 1595
GRAPHIC WRAP
06/15/2016
FABRICATION
MODEL RISERS -
FRAMING DETAILS
COMIC-CON 2016
1160110
LEGO SYSTEMS, INC.
HENAGHAN
LP
MR-2
2 3
MODEL_RISERS.DWG
2
MR-2
3
MR-2
Ø60"
60"
4
1
8
"
92"
96
1
8
"
4
1
8
"
92"
96
1
8
"
60"
1" = 1'-0"
1
MR-2
MODEL RISERS - TOP VIEW
WALL SKIN & PLATFORM LID REMOVED
1" = 1'-0"
2
MR-2
MODEL RISERS - FRONT VIEW
WALL SKIN REMOVED 1" = 1'-0"
3
MR-2
MODEL RISERS - SIDE VIEW
WALL SKIN REMOVED
4
MR-2
4
MR-2
Ø60"
1" = 1'-0"
4
MR-2
MODEL RISERS - PLATFORM DETAILS
ISOMETRICS FROM ABOVE
FRONT SIDE
TOP
30"
30"
60"
4
1
8
"
60"
4
1
8
"
USE BOLTS & TEE-NUTS TO ATTACH FITTINGS
TO UNDERSIDE OF PLATFORM LID
SCREW SQUARE FRAME TO UNDERSIDE OF PLATFORM LID -
DO NOT GLUE TO LID!!!! -
FRAME MAY SHIFT IN FIELD TO ACCOMMODATE LEGO MODEL HARDWARE
5
MR-2
5
MR-2
1" = 1'-0"
5
MR-2
MODEL RISERS - WALL DETAILS
FRONT SIDE
TOP
56"
62
5
16
"
2
1
2
"
3"
51
1
2
"
51
1
16
"
24"
24"
24"
20"
92"
CENTER
PIPE
96"
4"
SIDE
PIPE
52"
GLUE
3
4
PIPE (1" OD)
INSIDE WALL FRAMING
CENTER PIPE AS WIRE CHASE
IF NEEDED
16"
92"
ISOMETRICS
ISOMETRICS FROM BELOW
1
4
" ROUND-OVER AROUND
EDGES FOR LINEX FINISH
10 Enterprise Avenue,
Clifton Park, New York 12065
This is an original drawing created by Creatacor Inc. It is submitted for your personal use, in connection with a project being prepared
for you by Creatacor Inc. This design is to remain the exclusive property of Creatacor Inc. under the agreement that the use of this
design in its entirety or any part will not be reproduced, copied, lent or used for any purpose without written consent from Creatacor Inc.
DATE:
PROJECT:
JOB #:
CLIENT:
MANAGER:
DRAWING NAME:
EMAIL: [email protected]
TEL: 518.664.8750
FAX: 518.664.8667
DRAWING TYPE:
DRAFTSPERSON:
PACKAGE:
TITLE:
FILE:
OF
2
1
3
4
REVISION DATES:
M1
MATERIALS:
3/4" BAHAMA PLY
M2
M3
M4
M5
M6
M7
M8
F1
FINISHES/LAMINATES:
STOCK BLACK LINEX FINISH
F2
F3
F4
F5
F6
F7
F8
H1
HARDWARE:
GALV. IRON SLIP-ON RAILING, HVY DTY FLANGE, MCM #4936T187
H2
H3
H4
H5
H6
H7
H8
06/20/2016 - AS BUILTS
6
5
7
8
ZINC-PLT STEEL TEE NUT INSERTS, 3/8-16 SIZE, MCM #90975A031
3/8" BAHAMA PLY
1/4" BEND BOARD
3/4" KING STARBOARD
ALUM. PIPE, 3/4" PIPE SIZE, SCHED. 40
BLACK LAMINATE WILSONART POSTFORM 1595
GRAPHIC WRAP
06/15/2016
FABRICATION
MODEL RISERS -
FRAMING DETAILS
COMIC-CON 2016
1160110
LEGO SYSTEMS, INC.
HENAGHAN
LP
MR-2
2 3
MODEL_RISERS.DWG
2
MR-2
3
MR-2
Ø60"
60"
4
1
8
"
92"
96
1
8
"
4
1
8
"
92"
96
1
8
"
60"
1" = 1'-0"
1
MR-2
MODEL RISERS - TOP VIEW
WALL SKIN & PLATFORM LID REMOVED
1" = 1'-0"
2
MR-2
MODEL RISERS - FRONT VIEW
WALL SKIN REMOVED 1" = 1'-0"
3
MR-2
MODEL RISERS - SIDE VIEW
WALL SKIN REMOVED
4
MR-2
4
MR-2
Ø60"
1" = 1'-0"
4
MR-2
MODEL RISERS - PLATFORM DETAILS
ISOMETRICS FROM ABOVE
FRONT SIDE
TOP
30"
30"
60"
4
1
8
"
60"
4
1
8
"
USE BOLTS & TEE-NUTS TO ATTACH FITTINGS
TO UNDERSIDE OF PLATFORM LID
SCREW SQUARE FRAME TO UNDERSIDE OF PLATFORM LID -
DO NOT GLUE TO LID!!!! -
FRAME MAY SHIFT IN FIELD TO ACCOMMODATE LEGO MODEL HARDWARE
5
MR-2
5
MR-2
1" = 1'-0"
5
MR-2
MODEL RISERS - WALL DETAILS
FRONT SIDE
TOP
56"
62
5
16
"
2
1
2
"
3"
51
1
2
"
51
1
16
"
24"
24"
24"
20"
92"
CENTER
PIPE
96"
4"
SIDE
PIPE
52"
GLUE
3
4
PIPE (1" OD)
INSIDE WALL FRAMING
CENTER PIPE AS WIRE CHASE
IF NEEDED
16"
92"
ISOMETRICS
ISOMETRICS FROM BELOW
1
4
" ROUND-OVER AROUND
EDGES FOR LINEX FINISH
Materials
Num. Name Thickness
Part Qty.
1
Material_0.7500
0.7500 32
2
Material_0.3750
0.3750 3
Parts
Num. Name Size
Image
Material
Qty.
Has BackSide
1
WALL_ARC_UPPER_TOP
43.7889 x 28.9928 x 0.7500
Material_0.7500
1
2
WALL_ARC_UPPER
43.7889 x 28.9928 x 0.7500
Material_0.7500
2
3
WALL_ARC_LOWER
43.7889 x 28.9928 x 0.7500
Material_0.7500
2
4
WALL_ARC_LOWER_BOTTOM
43.7889 x 28.9928 x 0.7500
Material_0.7500
1
5
WALL_RIB_OUTER
92.0000 x 2.5000 x 0.7500
Material_0.7500
2
6
WALL_RIB_INNER
90.9375 x 2.5000 x 0.7500
Material_0.7500
2
7
PLAT_LID
60.0000 x 60.0000 x 0.7500
Material_0.7500
1
8
PLAT_RING_MIDDLE_1A
45.0000 x 30.0000 x 0.7500
Material_0.7500
1
9
PLAT_RING_MIDDLE_1B
45.0000 x 30.0000 x 0.7500
Material_0.7500
1
10
PLAT_RING_MIDDLE_1C
45.0000 x 30.0000 x 0.7500
Material_0.7500
1
11
PLAT_RING_MIDDLE_2A
45.0000 x 30.0000 x 0.7500
Material_0.7500
1
12
PLAT_RING_MIDDLE_2B
45.0000 x 30.0000 x 0.7500
Material_0.7500
1
13
PLAT_RING_MIDDLE_2C
45.0000 x 30.0000 x 0.7500
Material_0.7500
1
14
PLAT_RING_MIDDLE_3A
45.0000 x 30.0000 x 0.7500
Material_0.7500
1
15
PLAT_RING_MIDDLE_3B
45.0000 x 30.0000 x 0.7500
Material_0.7500
1
16
PLAT_RING_MIDDLE_3C
45.0000 x 30.0000 x 0.7500
Material_0.7500
1
17
PLAT_RING_MIDDLE_4A
45.0000 x 30.0000 x 0.3750
Material_0.3750
1
18
PLAT_RING_MIDDLE_4B
45.0000 x 30.0000 x 0.3750
Material_0.3750
1
19
PLAT_RING_MIDDLE_4C
45.0000 x 30.0000 x 0.3750
Material_0.3750
1
20
PLAT_RING_BOTTOM-A
43.8750 x 29.2500 x 0.7500
Material_0.7500
1
21
PLAT_RING_BOTTOM-B
43.8750 x 29.2500 x 0.7500
Material_0.7500
1
22
PLAT_RING_BOTTOM-C
43.8750 x 29.2500 x 0.7500
Material_0.7500
1
23
FRAME_END
29.0000 x 3.3750 x 0.7500
Material_0.7500
2
24
FRAME_SIDE
30.0000 x 3.3750 x 0.7500
Material_0.7500
2
25
FRAME_MIDDLE
29.0000 x 3.3750 x 0.7500
Material_0.7500
1
26
FRAME_CORNER
12.7279 x 7.0711 x 0.7500
Material_0.7500
4
Total Parts 35
10 Enterprise Avenue,
Clifton Park, New York 12065
This is an original drawing created by Creatacor Inc. It is submitted for your personal use, in connection with a project being prepared
for you by Creatacor Inc. This design is to remain the exclusive property of Creatacor Inc. under the agreement that the use of this
design in its entirety or any part will not be reproduced, copied, lent or used for any purpose without written consent from Creatacor Inc.
DATE:
PROJECT:
JOB #:
CLIENT:
MANAGER:
DRAWING NAME:
EMAIL: [email protected]
TEL: 518.664.8750
FAX: 518.664.8667
DRAWING TYPE:
DRAFTSPERSON:
PACKAGE:
TITLE:
FILE:
OF
2
1
3
4
REVISION DATES:
M1
MATERIALS:
3/4" BAHAMA PLY
M2
M3
M4
M5
M6
M7
M8
F1
FINISHES/LAMINATES:
STOCK BLACK LINEX FINISH
F2
F3
F4
F5
F6
F7
F8
H1
HARDWARE:
GALV. IRON SLIP-ON RAILING, HVY DTY FLANGE, MCM #4936T187
H2
H3
H4
H5
H6
H7
H8
06/20/2016 - AS BUILTS
6
5
7
8
ZINC-PLT STEEL TEE NUT INSERTS, 3/8-16 SIZE, MCM #90975A031
3/8" BAHAMA PLY
1/4" BEND BOARD
3/4" KING STARBOARD
ALUM. PIPE, 3/4" PIPE SIZE, SCHED. 40
BLACK LAMINATE WILSONART POSTFORM 1595
GRAPHIC WRAP
06/15/2016
FABRICATION
MODEL RISERS -
FRAMING DETAILS
COMIC-CON 2016
1160110
LEGO SYSTEMS, INC.
HENAGHAN
LP
MR-3
3 3
MODEL_RISERS.DWG
WALL
PLATFORM
PLAT_RING_BOTTOM (A THRU C)
PLAT_RING_MIDDLE_4 (A THRU C)
TYP. SLIP-ON PIPE FITTING -
THRU-BOLTS TO LID
PLAT_LID
WALL_ARC_LOWER_BOTTOM
WALL BACK SKIN
WALL_ARC_UPPER_TOP
PLAT_RING_MIDDLE_3 (A THRU C)
PLAT_RING_MIDDLE_2 (A THRU C)
PLAT_RING_MIDDLE_1 (A THRU C)
WALL FRONT SKIN
WALL_ARC_UPPER
WALL_ARC_LOWER
WALL_RIB_OUTER
WALL_RIB_INNER
FRAME_SIDE
FRAME_END
FRAME MIDDLE
FRAME_CORNER
M3
M3
M1
M1
M1
M1
M1
M1
M4
M2
M1
M1
M1
M1
M5
H1
1 NEW LABELS
