Embed Size (px)
DESCRIPTION
ISOMETRIC CIRCLE. DRAW THE ISOMETRIC AXIS. Mark the dimension of the BLOCK Example 60 – 60 - 60. 60 mm. DRAW THE ISOMETRIC AXIS. 60 mm. DRAW THE ISOMETRIC AXIS. 60 mm. DRAW THE “BLOCK”. DRAW THE “BLOCK”. DRAW THE “BLOCK”. DRAW THE “BLOCK”. DRAW THE ISOMETRIC AXIS. - PowerPoint PPT Presentation
Citation preview
ISOMETRIC CIRCLE
DRAW THE ISOMETRIC AXIS.Mark the dimension of the BLOCK
Example 60 – 60 - 60
60 mm
DRAW THE ISOMETRIC AXIS.
60 mm
DRAW THE ISOMETRIC AXIS.
60 mm
DRAW THE “BLOCK”.
DRAW THE “BLOCK”.
DRAW THE “BLOCK”.
DRAW THE “BLOCK”..
DRAW THE ISOMETRIC AXIS.
DRAW THE ISOMETRIC AXIS.
THE “BLOCK”.
Work on this Plane.
We will start on this plane.
Divide the plane into 4. Draw line at the midpoint
1
2
3
4
Draw a line from the corner with the biggest angle to the midpoint of the
opposite side.
1
2
3
4
Corner with biggest angle
Midpoint of opposite
side
Midpoint of opposite
side
Draw a line from the corner with the biggest angle to the midpoint of the
opposite side.
1
2
3
4
Do the same in the other biggest angle.
1
2
3
4
With the radius equal to the length of line from corner to midpoint, strike an ARC to the opposite corner.
Radius
ARC
Do the same in the opposite corner.
Radius
ARC
Do the same in the opposite corner.
Radius
ARC
Do the same in the opposite corner.
Radius
ARC
Remember the Radius use to make the BIG Arc and the SMALL arc..
Radius
Radius
Big Arc
Small Arc
Let us work on the next plane.
Next, We will work on
this Plane
Again divide the plane into 4.
RadiusARC
Draw line from
midpoint
Draw line from
midpoint
Draw again the line from the biggest agle to the midpoint of opposite side.
RadiusARC
Midpoint opposite
side
Corner with biggest angle
Draw again the line from the biggest agle to the midpoint of opposite side.
RadiusARC
Midpoint opposite
side
Corner with biggest angle
Strike again an arc with the given Radius.
Radius
ARC
Strike again an arc with the given Radius.
Radius
ARC
Strike again an arc with the given Radius.
Radius
ARC
Strike again an arc with the given Radius.
Radius
ARC
Strike again an arc with the given Radius.
Now we will do the last plane.
Again Divide the plane into 4.
Make the intersect Line same from previous procedure.
Make the intersect Line same from previous procedure.
Make the intersect Line same from previous procedure.
Make the intersect Line same from previous procedure.
Make the intersect Line same from previous procedure.
Make the intersect Line same from previous procedure.
Make the intersect Line same from previous procedure.
Finish
Great Job!!!
“Isometric BOX”.
120
12
3
120
Inscribe "Isometric CIRCLE”.
1. Draw midpoint line, horizontal and vertical2. Draw line from vertex of 120 to midpoint of
opposite side. Do on both corner.3. Strike big and small radius until circle is
complete.
“Isometric CUBE”.
