2
Intrusion Alarm Systems | ISC-PRS-S3 Roller Shutter Contact ISC-PRS-S3 Roller Shutter Contact www.boschsecurity.com u Surface mount roller shutter contact u Parallel position mounting u EN50131-2-6 Grade 3 u SBSC certified Functions The magnetic contact is designed to monitor the opening of roller shutters in Security applications. Installation/configuration notes The surface mount magnetic housing shall be installed at roller shutters, sliding gates, sweeping gated etc. The contact housing shall be mounted on the ground. The surface of the installation must be smooth. Only non-ferromagnetic screws must be used for mounting the surface mount magnetic contact. The design of the unit protects the circuit against weather and mechanical influences from vehicles with rubber tires. Parts included Type Qt y. Component ISC-PRS- S3 1 Magnetic contact in housing and attached cable 1 Magnet in housing Technical specifications ISC-PRS-S3 Contact type 3 Single-pole NO contact Operating distance 34mm +/- 5mm Power input Max. 40V DC Switching current Max. 500mA Contact capacity Max. 6W Transition resistance Max. 0,15 W Breakdown voltage >250 V Connecting cable LIYY 4 x 0,14 mm² Cu tinned, suitable for LSA technique Outer cable colour grey Inner conductor Blue, green, yellow, red Contact housing dimension 144 x 50 x 16,5 mm Cable dimension Ø 3,2mm Metal hose L 1 m, 6 x 9 mm steel galvanized, PVC coated Magnet Ø 12 x 55mm AlNiCo 5, axial polarized

ISC-PRS-S3 Roller Shutter Contact - Bosch Securityresource.boschsecurity.com/documents/Data_sheet... · Intrusion Alarm Systems | ISC-PRS-S3 Roller Shutter Contact ISC-PRS-S3 Roller

Embed Size (px)

Citation preview

Page 1: ISC-PRS-S3 Roller Shutter Contact - Bosch Securityresource.boschsecurity.com/documents/Data_sheet... · Intrusion Alarm Systems | ISC-PRS-S3 Roller Shutter Contact ISC-PRS-S3 Roller

Intrusion Alarm Systems | ISC-PRS-S3 Roller Shutter Contact

ISC-PRS-S3 Roller Shutter Contact

www.boschsecurity.com

u Surface mount roller shutter contact

u Parallel position mounting

u EN50131-2-6 Grade 3

u SBSC certified

Functions

The magnetic contact is designed to monitor theopening of roller shutters in Security applications.

Installation/configuration notes

• The surface mount magnetic housing shall beinstalled at roller shutters, sliding gates, sweepinggated etc.

• The contact housing shall be mounted on the ground.The surface of the installation must be smooth.

• Only non-ferromagnetic screws must be used formounting the surface mount magnetic contact.

• The design of the unit protects the circuit againstweather and mechanical influences from vehicles withrubber tires.

Parts included

Type Qty.

Component

ISC-PRS-S3

1 Magnetic contact in housing and attached cable

1 Magnet in housing

Technical specifications

ISC-PRS-S3

Contact type 3 Single-pole NO contact

Operating distance 34mm +/- 5mm

Power input Max. 40V DC

Switching current Max. 500mA

Contact capacity Max. 6W

Transition resistance Max. 0,15 W

Breakdown voltage >250 V

Connecting cable LIYY 4 x 0,14 mm² Cu tinned, suitable for LSAtechnique

Outer cable colour grey

Inner conductor Blue, green, yellow, red

Contact housingdimension

144 x 50 x 16,5 mm

Cable dimension Ø 3,2mm

Metal hose L 1 m, ⌀6 x 9 mm steel galvanized, PVC coated

Magnet Ø 12 x 55mm AlNiCo 5, axial polarized

Page 2: ISC-PRS-S3 Roller Shutter Contact - Bosch Securityresource.boschsecurity.com/documents/Data_sheet... · Intrusion Alarm Systems | ISC-PRS-S3 Roller Shutter Contact ISC-PRS-S3 Roller

Magnet housingdimensions

66 x 40 x 35 mm

Housing material PA-GF

Housing colour grey

Temperature range -40°C to +70°C

Protection category VdS – environmental class III, IP67EN- environmental class IIIA

Certification EN 50131-2-6, Grade 3SBSC certified

Ordering information

ISC-PRS-S3 Roller Shutter ContactSurface mountable roller shutter contact.Order number ISC-PRS-S3

2 | ISC-PRS-S3 Roller Shutter Contact

Represented by:

Americas: Europe, Middle East, Africa: Asia-Pacific: China: America Latina:Bosch Security Systems, Inc.130 Perinton ParkwayFairport, New York, 14450, USAPhone: +1 800 289 0096Fax: +1 585 223 [email protected]

Bosch Security Systems B.V.P.O. Box 800025617 BA Eindhoven, The NetherlandsPhone: + 31 40 2577 284Fax: +31 40 2577 [email protected]

Robert Bosch (SEA) Pte Ltd, SecuritySystems11 Bishan Street 21Singapore 573943Phone: +65 6571 2808Fax: +65 6571 [email protected]

Bosch (Shanghai) Security Systems Ltd.201 Building, No. 333 Fuquan RoadNorth IBPChangning District, Shanghai200335 ChinaPhone +86 21 22181111Fax: +86 21 22182398www.boschsecurity.com.cn

Robert Bosch Ltda Security Systems DivisionVia Anhanguera, Km 98CEP 13065-900Campinas, Sao Paulo, BrazilPhone: +55 19 2103 2860Fax: +55 19 2103 [email protected]

© Bosch Security Systems 2013 | Data subject to change without notice1413347083 | en, V1, 01. Oct 2013