Upload
dinhkhuong
View
250
Download
3
Embed Size (px)
Citation preview
IS-H SAP Healthcare for Hospitals
Release Notes
SAP ERP Central ComponentRelease 6.0
© Copyright 2005. SAP AG. All rights reserved.
No part of this publication may be reproduced or transmitted in any form or for any purpose without the express permissionof SAP AG. The information contained herein may be changed without prior notice.
Some software products marketed by SAP AG and its distributors contain proprietary software components of other softwarevendors.
Microsoft®, WINDOWS®, NT®, EXCEL®, Word®, PowerPoint® and SQL Server® are registered trademarks ofMicrosoft Corporation.
IBM®, DB2®, OS/2®, DB2/6000®, Parallel Sysplex®, MVS/ESA®, RS/6000®, AIX®, S/390®, AS/400®, OS/390®, andOS/400® are registered trademarks of IBM Corporation.
ORACLE® is a registered trademark of ORACLE Corporation.
INFORMIX®-OnLine for SAP and Informix® Dynamic ServerTM
are registered trademarks of Informix SoftwareIncorporated.
UNIX®, X/Open®, OSF/1®, and Motif® are registered trademarks of the Open Group.
Citrix®, the Citrix logo, ICA®, Program Neighborhood®, MetaFrame®, WinFrame®, VideoFrame®, MultiWin® and otherCitrix product names referenced herein are trademarks of Citrix Systems, Inc.
HTML, DHTML, XML, XHTML are trademarks or registered trademarks of W3C®, World Wide Web Consortium,Massachusetts Institute of Technology.
JAVA® is a registered trademark of Sun Microsystems, Inc.
JAVASCRIPT® is a registered trademark of Sun Microsystems, Inc., used under license for technology invented andimplemented by Netscape.
SAP, SAP Logo, R/2, RIVA, R/3, SAP ArchiveLink, SAP Business Workflow, WebFlow, SAP EarlyWatch, BAPI,SAPPHIRE, Management Cockpit, mySAP.com Logo and mySAP.com are trademarks or registered trademarks of SAP AGin Germany and in several other countries all over the world. All other products mentioned are trademarks or registeredtrademarks of their respective companies.
Design: SAP Communications Media
37 IS-H SAP Healthcare - I Components for H 137.1 SAP ECC Industry Extension Healthcare 6.0 137.2 Important Activities 237.3 Switch to SAP List Viewer (ALV) (Changed) 337.4 Deleted Reports (Deleted) 437.5 Form Output with Adobe Forms (New) 437.6 IS-H-ACM SAP Ambulatory Care Management 637.6.1 SAP Ambulatory Care Management (New) 637.6.2 IS-H-ACM-PLN Planning 737.6.2.1 SAP ACM: New Features for Planning (New) 737.6.3 IS-H-ACM-ADM Administration 737.6.3.1 New Features in Outpatient Admission Area (New) 737.6.3.2 Case Category (New for All Countries Except AT/CH) 837.6.3.3 Clinical Process Builder Variants (New/Enhanced) 1137.6.3.4 Renewable Document Management in Clinical (New) 1437.6.4 IS-H-ACM-TMT Treatment 1637.6.4.1 Support for Outpatient Treatment Processes (New) 1637.6.4.2 Outpatient Documentation Work Station (New) 1737.6.4.3 Outpatient Documentation Work Station: Task List (New) 2037.6.4.4 Patient Viewer (New) 2237.6.4.5 Outpatient Documentation Work Station: Inf Components (New) 2437.6.4.6 Outpatient Documentation Work Station: Tem (New) 2537.6.4.7 DE: Panel Physician Association (PPA) Forms (New) 2837.6.4.8 DE: Workers' Compensation Forms (New) 2837.6.4.9 Outpatient Clinic Folder (New) 2837.6.4.10 Health Problem Documentation (New) 3037.6.5 IS-H-ACM-BIL Billing 3237.6.5.1 SAP Ambulatory Care Management: Outpatient Billing (New) 3237.6.5.2 Service Remapping (Enhanced) 3337.6.5.3 Rule for Service Remapping (R18) (New) 3437.6.5.4 Service Rule Control (New) 3437.6.5.5 Determination of Multiplication Factor (Enhanced) 3537.6.5.6 Separate Company Code for Direct Patient Billing (New) 3537.7 IS-H-BD Basic Data 3637.7.1 CH: Import Report for Internal Tariff Type (RNWCHTARTYP_DOM) (New) 3637.7.2 IS-H-BD-STR Hospital Structure 3737.7.2.1 Multiple Assignment of Building Units in V
______________________________________________________________SAP AG iii
Release-Informationen Inhaltsverzeichnis SAP AG______________________________________________________________
(New) 3737.7.3 IS-H-BD-BUS Business Partners 3837.7.3.1 CH: Company Number of Employer (New) 3837.7.4 IS-H-BD-SER Service Master Data 3837.7.4.1 Statistics-, Master Data-, and Utility Reports (Deleted) 3837.7.5 IS-H-BD-CWS Clinical Work Station 3937.7.5.1 Central BAdI for Execution of Customer-Spe (New) 3937.7.5.2 More Callpoints for Determining Variants (New) 3937.8 IS-H-PM Patient Management 4037.8.1 More Callpoints for Determining Variants (New) 4037.8.2 Hide Standard Variant in Clinical Process Builder (New) 4237.8.3 Function Bars in Clinical Process Builder (New) 4237.8.4 Patient Status Extract (Deleted) 4337.8.5 AT: Integration of E-Card into SAP Patient (New) 4337.8.6 IS-H-PM-PAT Patient Master Data 4337.8.6.1 New Field "Employed Since" for Patient's Employer (Changed) 4337.8.6.2 AT: Patient Master Data - Additional Title Field (New) 4437.8.7 IS-H-PM-INP Inpatient Case 4437.8.7.1 Maintain Absence in Clinical Process Builder (New) 4437.8.7.2 Old Transactions Switched Over to Clinical (Changed) 4537.8.7.3 New Processing Modes in Variant Determination (New) 4637.8.8 IS-H-PM-OUT Outpatient Case 4637.8.8.1 Old Transactions Switched Over to Clinical (Changed) 4637.8.8.2 New Processing Modes in Variant Determination (New) 4737.8.9 IS-H-PM-GEN General Case Processing 4837.8.9.1 Case Revision and Create with Template (Enhanced) 4837.8.9.2 AT: New Features in Clinical Process Builder (New) 5037.8.10 IS-H-PM-PLN Planning 5037.8.10.1 Report for Migration of Movement Data in P (New) 5037.8.10.2 Appointment Confirmation Dialog (Changed) 5137.8.10.3 Authorization Check when Maintaining Plann Slots (New) 5137.8.10.4 Time Slot Changes in Visit Scheduling (New) 5237.8.10.5 Multiple Assignment of Building Units in V (New) 5237.8.10.6 Admission without Appointment in Preregistration (Enhanced) 53
______________________________________________________________SAP AG iv
Release-Informationen Inhaltsverzeichnis SAP AG______________________________________________________________
37.9 IS-H-MD Medical/Nursing Documentation 5437.9.1 DE: Readmission Processing (New) 5437.9.2 IS-H-MD-DOC Basic Medical/Nursing Documentation 5437.9.2.1 "DRG Diagnoses" in Clinical Process Builder (New) 5437.9.2.2 "DRG System" Added to DRG Customizing (Enhanced) 5437.9.2.3 New Business Transactions for Basic Med. D Status (New) 5537.9.2.4 Case Status and Department Status in Clini (New) 5637.9.2.5 Report for Setting the Status for Multiple Cases (New) 5737.9.2.6 "Basic Medical Documentation Status" Subsc Process 5737.9.2.7 DE: DRG Key Figures: Limit Dates (mLOS-, a (New) 5737.9.2.8 BAPIs for Procedure Processing (Enhanced) 5837.9.2.9 "DRG Data" Subscreen in Clinical Process Builder (New) 5837.9.2.10 DE: DRG Work Station - Goto Readmission Transaction (New) 5937.9.2.11 OPS Localization (New) 5937.9.2.12 Case-Related Procedure Entry (New) 6037.9.2.13 Maintain DRG Data (Changed) 6137.9.2.14 DE: Procedure Entry - Support for Enhanced OPS 301 (New) 6237.9.2.15 New Features/Changes in Procedure Entry (Changed) 6237.9.2.16 DE: Quantity and Unit of Measure Added (New) 6337.9.2.17 DE: Indicators "Regrouping Is Advised" or (Changed) 6437.9.2.18 AT: Diagnoses - LKF: Asterisk/Dagger Plaus (Enhanced) 6437.9.3 IS-H-MD-MRM Medical Record Management 6437.9.3.1 Restriction of Access to Borrowing History (New) 6437.10 IS-H-PA Patient Accounting 6537.10.1 General Ledger in Financial Accounting (New) 6537.10.2 CH: Service Rule C18 - Time-Stamp Remapping (Changed) 6537.10.3 CH: Charge Factor Value Determination TARMED (Changed) 6537.10.4 CH: TARMED - Service Rule C19 - Maximum (Changed) 6537.10.5 CH: TARMED (Changed) 6637.10.6 DE: Invoice Reduction due to Integrated Care (New) 6637.10.7 DE: Mapping Length of Stay Reductions (New) 6637.10.8 DE: Readmission Processing (New) 6637.10.9 AT, CH: Fee-Based Billing Reset (New) 6637.10.10 DE: Checks During Creation of a Complete R (New) 6737.10.11 AT: Billing (Changed) 67
______________________________________________________________SAP AG v
Release-Informationen Inhaltsverzeichnis SAP AG______________________________________________________________
37.10.12 AT: Fee (Changed) 6737.10.13 AT: Service Rule A1/A2 - Flat Rate/Billability (Changed) 6737.10.14 AT: Service Rule A3 - Remapping - Selectio (Changed) 6737.10.15 AT: Service Rule A4 - Maximum Values per C (Changed) 6737.10.16 AT: Service Rule A6 - Maximum Service Values Scale (Changed) 6837.10.17 AT: Service Rule A9 - Maximum Values (Changed) 6837.10.18 AT: Service Rule AK: Exclusion Using Diagnoses (Changed) 6837.10.19 AT: Service Rules (Changed) 6837.10.20 IS-H-PA-INS Insurance Relationship 6837.10.20.1 Alternative Invoice Recipient (Changed) 6837.10.20.2 Insurance Relationships at Patient Merge (New) 6937.10.20.3 AT: Insurance Relationship: Third-Party Payer (Changed) 6937.10.21 IS-H-PA-SER Services 7037.10.21.1 DE: Service Rule R22 (New) 7037.10.21.2 DE: Service Rule R7 (Changed) 7037.10.21.3 BAPIs of Function Group 2099 (Changed) 7037.10.21.4 Automatic Assignment of Treatment Certific (New) 7037.10.21.5 Service Entry: Batch Input Behavior (Changed) 7137.10.21.6 Form Processing in Clinical Process Builder (Enhanced) 7137.10.21.7 Integration of Service Subscreen in Clinic (Enhanced 7237.10.21.8 Batch Input Switched Over to Direct Transfer (New) 7237.10.22 IS-H-PA-VER Insurance Verification 7237.10.22.1 Transactions for Insurance Verification (N (Deleted) 7237.10.23 IS-H-PA-COP Copayment 7337.10.23.1 Copayment: New Values for User Parameter DTZ (Changed) 7337.10.23.2 DE: Copayment Processing for Readmission Cases (Changed) 7337.10.23.3 DE: Outpatient Copayment/Practice Fee (New) 7437.10.23.4 Configure Outpatient Copayment Request and Payment (Changed) 7437.10.24 IS-H-PA-DPA Down Payment 7437.10.24.1 Functional Enhancements in Down Payment Monitor (New) 7437.10.25 IS-H-PA-BIL Billing 7537.10.25.1 DE: BDT Interface - SAP Enhancement NBDT0001 (Changed) 7537.10.25.2 CH: 5-Centime Rounding According to TARMED (Changed) 7537.10.25.3 DE: Outpatient Surgery (Changed) 7637.10.25.4 DE: Flat Rate per Case Regulation (FPV) 2005 (Changed) 7637.10.25.5 DE: Billing of Medically-Justified Companions (New) 76
______________________________________________________________SAP AG vi
Release-Informationen Inhaltsverzeichnis SAP AG______________________________________________________________
37.10.25.6 CA, CH, SG: Invoice Overview for Multiple (New) 7637.10.25.7 DE: BDT Interface - New Field Label for Re (New) 7737.10.25.8 DE: BDT Interface - Day Split (New) 7737.11 IS-H-MM Integration with M Management 7737.11.1 Ordering Physician in Case-Related Materia (New) 7737.11.2 IS-H MM: Case-Related Material Consumption (Changed) 7737.11.3 IS-H-MM-REQ Material Requisition 7837.11.3.1 Material Requisition (Changed) 7837.11.3.2 Collective Processing of Material Requisitions (Changed) 7937.11.3.3 Field Catalog "IS-H: Hospital Pharmacy Mat (Enhanced) 7937.11.3.4 Free-Text Requisitions in Material Requisi Processing 7937.11.3.5 Pick List Field Catalog (Enhanced) 8037.12 IS-H-IS Information System 8037.12.1 IS-H-IS-GMS Government-Mandated Statistics 8037.12.1.1 DE: AEB Statistics (Changed) 8037.12.1.2 DE: Report for Hospital Statistical Regula 2004 (New) 8037.12.1.3 AT: Statistics (Changed) 8137.12.2 IS-H-IS-STA Other Statistics 8137.12.2.1 CH: Hospital Type/Category Added to Report (Changed) 8137.13 IS-H-CM Communication 8137.13.1 CH: TARMED - Service Interface Using BAPI (Changed) 8137.13.2 CH: ELACH - Transmission of an Alternative (New) 8137.13.3 CH: ELACH - New Method for BAdI (New) 8137.13.4 CH: ELACH - Electronic Invoice Transmissio (Changed) 8237.13.5 CH: Error Handling ALIS Service Interface (Changed) 8237.13.6 IS-H-CM-OUT Communication with the Hospital 8237.13.6.1 SG: NPMI: Length of External Code Increase Characters 8237.13.6.2 DE: Transmission of Data According to Para (Changed) 83
______________________________________________________________SAP AG vii
Release-Informationen Inhaltsverzeichnis SAP AG______________________________________________________________
37.13.6.3 DE: Report "IS-H: DRG Data P21: Case Data" (Enhanced) 8337.13.6.4 AT: Data Interchange with Social Insurance Funds (New) 8337.13.6.5 AT: Data Interchange with Social Insurance Funds (Changed) 8337.13.6.6 8337.13.6.7 CH: New EDI Procedure XMLIN for MediData V4.0 (New) 8337.13.6.8 CH: RNADIN03 - Inclusion of Electronic Invoices (Changed) 8437.14 IS-H-TO Tools 8437.14.1 Harmonization of Archiving Reports (Changed) 8437.14.2 CH: Invoice Form (Smart Form) (Changed) 8537.14.3 DE: Form Print (Enhanced) 8537.14.4 Use of Form Overlays with Form Archiving (Changed) 8537.14.5 PDF-Based Forms for Form Print (New) 8537.14.6 Work Organizer Type ARCHCASE (Deleted) 8637.14.7 Program for Table NFALA Migration (Deleted) 86
______________________________________________________________SAP AG viii
Release-Informationen Inhaltsverzeichnis SAP AG______________________________________________________________
37 IS-H SAP Healthcare - Industry-Specific Componentsfor H
37.1 SAP ECC Industry Extension Healthcare 6.0
Use
These release notes provide an overview of the new features offered by SAP ECC Industry ExtensionHealthcare 6.0, business functions SAP Patient Management and SAP Ambulatory CareManagement.
This version is part of mySAP ERP 2005.
To use the functions of SAP Patient Management, you must activate the business function setHealthcare. This is automatically preset for all upgrade customers. The business function SAP PatientManagement (ISH_MAIN) is thus automatically activated. To use the functions of SAP AmbulatoryCare Management, you also have to activate the business function SAP Ambulatory Care Management(ISH_AMBULATORY).
Note: The activation of a business function set or of a business function is analogous to the installation ofan Add-On and is irreversible.
If you have skipped one or more releases, it is essential that you read the release notes for the release(s)concerned - both those for SAP Patient Management and those for the mySAP Technology Components.The SAP Patient Management release notes are located on the SAP Service Marketplace(http://service.sap.com) under the quick link healthcare-releasenotes.
For information about how to generate the release note structure, see the SAP Note 195299. This SAPNote also contains details on how to generate country-specific release note structures.
This new release contains new functionality and improvements. Some of these may require you to modifyyour system configuration after upgrading. Consequently, you should check, and, if necessary, performthe Customizing activities mentioned in the following documentation. This applies, in particular, to theactivities listed in the section entitled Important Activities. Such activities are usually necessary if youwish to use new or enhanced functions.
In many chapters of the online release notes, you can directly access the relevant section of the IS-HImplementation Guide. In Customizing, you can also generate a view containing all upgradeCustomizing and/or delta Customizing activities. When doing this, please make the followingspecifications:
- Specify IS-H for the Add-On ID.
- You have to respect a particular notation when entering the values for From Release and ToRelease. Examples of the naming convention from earlier IS-H Releases are 4.01A/0, 402A, 403A,461A, 462, 463,463B, 471 and 472. The name of the current release is 600. For comprehensiveinformation about generating views, please refer to the online documentation, which you access - ifthe latest documentation DVD has been installed - by choosing Help -> SAP Library. Then chooseSAP Library -> SAP NetWeaver -> Solution Life Cycle Management -> Customizing(BC-CUS) -> Customizing (BC-CUS).
A number of release notes relate exclusively to developments for particular country versions. Such
______________________________________________________________SAP AG 1
SAP-System______________________________________________________________
release notes are identified by country keys in their short text. For example:
- AT: Release note for the country version Austria
- CA: Release note for the country version Canada
- CH: Release note for the country version Switzerland
- DE: Release note for the country version Germany
- SG: Release note for the country version Singapore
The functions described in country-specific release notes have not been released for other countryversions.
If various changes described in a release note apply to particular country version, this is indicated by areference to the respective country version, or by the country key.
Note on the topic "DRGs": The DRG guide is located on the SAP Service Marketplace under the quicklink /healthcare-guides.
The next SAP Patient Management Release is part of mySAP ERP 2007, and is scheduled to be shippedin Q2/2007. Updates about this are located on the SAP Service Marketplace under the quick link/releasestrategy. Changes that result from legal requirements before this date will be shipped inAdd-On-Support Packages.
SAP for Healthcare Development
37.2 Important Activities
Use
Note the following important activities for SAP ECC Industry Extension Healthcare 6.0:
Authorization Check when Maintaining Planning Objects and Time Slots
In the Appointment Management area, you can now check relevant authorizations by means of theauthorization object N_AMB_DSP and the new activities T0 (Display Time Slots) and T1 (MaintainTime Slots) when planning object data and time slot- or admission capacity data is maintained.
Note that all users for whom you previously restricted the activities with respect to the authorizationobject N_AMB_DSP are not authorized to maintain planning objects and time slots after the new releasehas been implemented. Add the new activities T0 and/or T1 to the authorization for the users concerned.
______________________________________________________________SAP AG 2
SAP-System______________________________________________________________
Service Rules
This section only applies to upgrade customers who have not already carried out this activity for one ofthe Add-On Support Packages:
Refer to the release notes DE: Service Rule R7 Charge Proposal (Flat Rates per Case +Procedures Surcharges) (Changed) and DE: Service Rule R22 "Generate Additional Charges(FPV)" (New). Then, deactivate the service rule R7 and activate the service rule R22, if necessary.
AEB Statistics
Refer to the release note DE: AEB Statistics (Changed). Copy the new standard layout of the SAP ListViewer for the report IS-H DE: E3.1 Statistics (Case-Related Charges according to §6(1)/§6(2)KHEntgG) (RNSE31) from client 000 into your production clients with the help of the reportRKKBALVI:
- E3.1 KHEntgG 2005 Services without Individual Case Display (1KHENT05OHNE)
- E3.1 KHEntgG 2005 Service with Single Case Display (1KHENTG05MIT)
A step-by-step description of this procedure is available on the SAP Service Marketplace under the quicklink /healthcare-guides in the Statistics Guide DE: AEB Statistics under E3.1 Statistics -> Output ->Layout according to KHEntgG.
Case Archiving in IS-H
Refer to the release note Harmonization of Archiving Reports (New). Make the following changes inthe IMG activity Set Up Case Archiving:
Call up the detail display for the archiving object ISH_FALL. For the Test Mode Variant field, selectthe variant SAP&TEST and for the Production Mode Variant field, select the variant SAP&PROD.
Then call the report RNARCF0D. Delete the variants PRODUKTIV and TESTLAUF for this report.
37.3 Switch to SAP List Viewer (ALV) (Changed)
Use
For SAP ECC Industry Extension Healthcare 6.0, we have switched over many reports to SAP ListViewer (ALV) technology. The reports concerned are listed in the SAP Note 831419.
______________________________________________________________SAP AG 3
SAP-System______________________________________________________________
37.4 Deleted Reports (Deleted)
Use
A number of reports have been deleted for SAP ECC Industry Extension Healthcare 6.0. Thesereports are listed in the SAP Note 848915.
For further information, see the following release notes:
- Statistics-, Master Data- and Utility Reports (Deleted)
- Program for Table NFALA Migration (Deleted)
- AT: Statistics (Changed)
37.5 Form Output with Adobe Forms (New)
Use
As of SAP ECC Industry Extension Healthcare 6.0, you can output forms using PDF print forms(Adobe Forms).
The table below lists the existing forms in SAPscript and Smart Form format with the equivalent AdobeForms:
SAPscript Form Adobe Form Description
N_ANZ_UEBERW ISH_DOWNPAYMENT_REQ Down Payment Request
N_ANZ_QUIT ISH_DOWNPAYMENT Down Payment Receipt
N_TERMIN_BENACHR ISH_VISIT_APPOINTMENT Outpatient Appt Notification
N_EINBESTELLUNG ISH_NOTIFICATION Outpatient Admission Notification
N_AUFNAHMEANZEIG ISH_ADMISSION_NOTIF Admission Data for Ins. Provider
N_AUFVERTRAG ISH_ADM_RELEASE_FORM Admitting Release Form
N_BEGLEITPERSON ISH_COMPANION Companion Data
______________________________________________________________SAP AG 4
SAP-System______________________________________________________________
N_ENTLASSANZEIGE ISH_DISCHARGE Discharge Notification for Ins.Provider
N_ENTBINDUNG ISH_DELIVERY Delivery Data
N_GEBANZEIGE ISH_BIRTH_CERT Birth Registration
N_KAV_MAHN ISH_DUNNING_MEDREC Medical Record Reminder
N_MATANF_CASE ISH_MATREQ_CASE Material Requisition per Case
N_MATANF_OE ISH_MATREQ_OU OU-Related Material Requisition
N_ENTLEIHSCHEIN ISH_BORROWING_SLIP Borrowing/Request Slip
N_PDATEN ISH_PATIENT_DATA Patient Data Sheet
N_ETI ISH_PATIENT_LABEL Patient Labels
N_PMT_QUIT ISH_PAYMENT_RECEIPT Receipt for Incoming Payment
N_BARZTSCHEIN ISH_EXT_PH_CERTIFICATE External Physician Certificate(RVO Funds)
N_KRANKENSCHEIN ISH_SICKNESS_CERT Sickness Certificate
N_NOTFALLSCHEIN ISH_EMERGENCY_CERT Emergency/Referral Certificate
N_ARBUNFAEHIG ISH_WORK_INCAPACITY Work Incapacity Certificate
N_REZEPT ISH_DRUG_PRESCRIPTION Prescription
N_UEBERSCHEIN ISH_REFERRAL_CERT Referral Certificate
N_PSTAMM ISH_PATIENT_MASTER Patient Master Data Sheet
N_ZUZ_UEBERW ISH_COPAYMENT Copayment Form
N_ZUZ_QUIT ISH_COPAYMENT Copayment Receipt
N_ZUZ_RUECK ISH_COPAYMENT_BACK Copayment: Post Back Form
N_ZUZ_AVIS ISH_COPAYMENT_ADV Copayment: Payment AdviceNote
Smart Forms -> Adobe Forms
Description
ISH_INSURANCE_ADMISSION_INFO ISH_ADMISSION_NOTIF
Outpatient Visit Data Insurance Provider
ISH_COPAYMENT ISH_OUTPATIENT_COPAYMENT
Outpatient Copayment Form
ISH_DRG_DATAS ISH_DRG_DATAS
DRG-Relevant Data
ISH_KOS_ANTRAG ISH_INS_VERIFICATION_REQ
Insurance Verification Request
ISH_MATERIAL_CATALOGUE ISH_MATERIAL_CATALOGUE
Material Catalog
ISH_CLOSET_LIST ISH_CLOSET_LIST
Closet List
______________________________________________________________SAP AG 5
SAP-System______________________________________________________________
See also
For an overview of form use based on work organizer types including the function module names, seeHealthcare -> SAP Patient Management -> Appendix -> Forms in SAP Patient Management inthe SAP Library.
37.6 IS-H-ACM SAP Ambulatory Care Management
37.6.1 SAP Ambulatory Care Management (New)
Use
As of SAP ECC Industry Extension Healthcare 6.0, the component SAP Ambulatory CareManagement provides end-to-end, enhanced support for the entire outpatient treatment scenario, fromplanning, through administration and treatment to billing.
The main emphasize is on role-based work stations for the admission and treatment areas, for example.Of particular note is the introduction of the Outpatient Documentation Work Station, which provides theattending physician with a task-centric, navigationless work environment for all his or her specific tasks.
In the admission area, the Admission Work Station also provides specific process support for the mainoutpatient treatment forms, including:
- Treatment after an accident at work
- Treatment of a patient with statutory health insurance
- Treatment of a patient with private health insurance
General renewable document management enables you to document the issuing of various forms thatfollow the initial document and renewed document logic (for example, work incapacity certificates).
The integration of legally-required forms for panel physician (PPA) and workers' compensation(workers' comp.) treatment in the country version Germany, and functional enhancements to serviceentry and billing round off the portfolio.
PPA certification for the German market is planned for the end of 2005 for SAP Ambulatory CareManagement.
Note that SAP Ambulatory Care Management requires and is based on SAP Patient Management(IS-H).
______________________________________________________________SAP AG 6
SAP-System______________________________________________________________
Effects on Customizing
To use the functions of SAP Ambulatory Care Management, you must activate the business functionSAP Ambulatory Care Management (ISH_AMBULATORY).
See also
If you are interested by SAP Ambulatory Care Management, please contact your SAP salesrepresentative.
37.6.2 IS-H-ACM-PLN Planning
37.6.2.1 SAP ACM: New Features for Planning (New)
Use
As of SAP ECC Industry Extension Healthcare 6.0, SAP Patient Management provides new features,such as flexible room planning for multiple organizational units. For detailed information, see thefollowing release notes:
- Report for Migration of Movement Data in Preregistration (New)
- Appointment Confirmation Dialog (Changed)
- Authorization Check when Maintaining Planning Objects/Time Slots (New)
- Time Slot Changes in Visit Scheduling (New)
- Multiple Assignment of Building Units in Visit Scheduling (New)
- Admission without Appointment in Preregistration (Enhanced)
See also the information about enhancements to the planning component for i.s.h.med.
37.6.3 IS-H-ACM-ADM Administration
37.6.3.1 New Features in Outpatient Admission Area (New)
Use
______________________________________________________________SAP AG 7
SAP-System______________________________________________________________
As of SAP ECC Industry Extension Healthcare 6.0, end-to-end support for specific outpatienttreatment types (for example, accident at work, self-payer) is provided for the administrative admissionof outpatients.
A new classification for outpatient treatment types (case category) provides you with preconfiguredadmission variants that simplify the admission process.
In this context, the effective date of the patient's employment relationship has been added to theemployer data.
Besides simplifying the admission process per se, the system also supports the management of renewabledocuments (for example, work incapacity certificates) for individual patients. This enables you to managedocuments that obey the logic of renewable document chains based on initial documents and reneweddocuments.
Effects on Customizing
To use this function, you must activate the business function SAP Ambulatory Care Management(ISH_AMBULATORY).
37.6.3.2 Case Category (New for All Countries Except AT/CH)
Use
As of SAP ECC Industry Extension Healthcare 6.0, the case category is provided for all countries.(The Case Category object is already in use with a limited functional scope in the country versionsAustria and Switzerland).
The case category is a semantic-free classification of the case. It is used to control the patient's treatmentat an early stage and thus to trigger the appropriate type of documentation.
You can maintain the case category of your choosing. It enables you to determine the assignment ofmovement types, the selected admission variant, and the assignment of work situations.
The case categories you have defined and the assigned movement types are displayed for selection in adialog box when a new movement or a new case is to be created. You can select one of the followingoptions in this dialog box:
- A case category
- A movement type including case category
- Neither movement type nor case category
The system transfers your selection into the relevant admission fields.
The system also uses this selection to control variant determination for the Clinical Process Builder.
______________________________________________________________SAP AG 8
SAP-System______________________________________________________________
It also determines the set of work situations that are maintained for the corresponding case category.
You can change the case category of a case at any time. The system provides the customizable messageN_OUTPATIENT 103 (Movement type &1 is not supported for case category &2) that checks theconsistency between case category and movement types.
Note that the selection of the case category is determinant for the entire case and not simply themovement.
You can select the case category in a number of places in the system:
- Admission (transaction code NV2000 - Clinical Process Builder)By selecting the variant or access via the variant transaction. You can maintain the case category onthe Case Data subscreen. The system does not display the dialog box for you to select the casecategory.
- Clinical Work Station (transaction code NWP1)By choosing Create Visit or Create Admission. The system displays a dialog box for you to selectthe case category and the movement type. It is possible to select just a case category, or a movementtype with implicit case category, or neither case category nor movement type. The system thendetermines the variant on the basis of this selection.
- Appointment (transaction code NR16 - Visit Scheduling)You can enter the case category and the movement type in the appointment editor. If you have filledboth of these fields, the system checks whether the assignment between the two exists. If this is notthe case, the system issues the customizable message N_OUTPATIENT 103 (see below).If you create a movement from the appointment, the system transfers the case category andmovement also.If you have left either of these fields empty, the system displays the dialog box for you to make aselection.
- PreregistrationYou can enter the case category and the movement type in the preregistration. If you have filledboth of these fields, the system checks whether the assignment between the two exists. If this is notthe case, the system issues a customizable message.If you create a movement from the preregistration, the system transfers the case category andmovement type also.If you have left these fields empty, the system displays the dialog box for you to make a selection.
The case category is incorporated into the Business Add-Ins (BAdIs) of the Clinical Process Builder forpresetting and checking case data.
The case category is also incorporated into the Business Application Programming Interfaces (BAPIs) forthe case.
Effects on Existing Data
The case category already existed for the country versions Austria and Switzerland. Customizing for thecase category contains indicators that the system does not take into account for the present usage. Theprevious entries are retained.
Effects on System Administration
______________________________________________________________SAP AG 9
SAP-System______________________________________________________________
Define Case Categories
You define the case categories for your system in the IMG activity Define Case Categories. You canuse any keys, but they should be meaningful for the users.
For SAP Ambulatory Care Management, we suggest the following case categories that enable you tomake complete use of the set of new features contained in this release:
- BG - Workers' compensation case
- KV - Panel physician association case
- NA - Emergency admission
- PV - Private patient billing
For further information, see SAP Healthcare - Industry-Specific Components for Hospitals ->Patient Management -> Cases -> Define Case Types in the IS-H Implementation Guide.
Store Assignments to Case Categories
In the IMG activity Maintain Assignments to Case Categories, you store the movement categoriesand movement types you want to assign to the case categories. This forms the basis for the subsequentassignment to admission variants. The movement types you wish to assign must have been stored in theIMG activity Define Movement Types. Note that the system does not check the indicators of amovement type in connection with a case category.
For further information, see SAP Healthcare - Industry-Specific Components for Hospitals ->Patient Management -> Cases -> Maintain Assignment to Case Categories and SAP Healthcare- Industry-Specific Components for Hospitals -> Patient Management -> Movements -> DefineMovement Types in the IS-H Implementation Guide.
Activate Case Categories
In the IMG activity Activate Case Categories, make an entry for your institution to activate theselection of case categories for outpatient and/or inpatient cases.
For further information, see SAP Healthcare -> Patient Management -> Cases -> Activate CaseCategories in the IS-H Implementation Guide.
Maintain Variant Determination Based on Case Categories
In the IMG activity Determine Variant for Clinical Process Builder, you can stipulate the casecategories and movement types the system is to use when determining the admission variant.(Alternatively, you can call this table directly using the transaction code SM30).
SAP provides preconfigured variants for the case categories named above. You can also create andincorporate your own variants for the Clinical Process Builder and transaction variants.
For further information, see SAP Healthcare - Industry-Specific Components for Hospitals -> BasicSettings -> Screen Control -> Determine Variant for Clinical Process Builder in the IS-HImplementation Guide/
______________________________________________________________SAP AG 10
SAP-System______________________________________________________________
Maintain Work Situations Based on Case Categories
From the SAP Easy Access screen, you can store work situations by choosing Hospital -> AmbulatoryCare Management -> Treatment -> Template Management Documentation Work Station. Youcan define the assignment to case categories, movement categories, and movement types on the ProposalCriteria tab page.
Maintain Customizable Message
You can change the message type for the message Movement type &1 is not supported for casecategory &2 using IS-H message control. You access the message control table by choosing SAPHealthcare - Industry-Specific Components for Hospitals -> Basic Settings -> SystemParameters -> Maintain Messages in the IS-H Implementation Guide.
To change the message type, you have to make the following entries:
- Institution: <your institution> or *
- Function: NFAL
- Application Area: N_OUTPATIENT
- Message Number (MsgNo.): 103
- Default Type: I
- Message Text: Movement type &1 is not supported for case category &2
Effects on Customizing
To use this function, you must activate the business function SAP Ambulatory Care Management(ISH_AMBULATORY).
37.6.3.3 Clinical Process Builder Variants (New/Enhanced)
Use
As of SAP ECC Industry Extension Healthcare 6.0, new outpatient variants for the Clinical ProcessBuilder are provided along with associated transaction variants. Variant determination has also beenenhanced.
The new and enhanced features in detail:
Clinical Process Builder Variants
The new variants for the Clinical Process Builder enable the appropriate form of outpatient admissiondependent on a control based on the case category.
The following new variants are provided:
- SAP ACM Panel Physician Association for panel physician association treatment
______________________________________________________________SAP AG 11
SAP-System______________________________________________________________
- SAP ACM Workers' Compensation for workers' compensation treatment
- SAP ACM Emergency Admission for emergency admissions
- SAP ACM Privately Insured for private physician treatment
- SAP ACM Complete for all variants.
Transaction Variants
Transaction variants are used to preset field values, to define required entry fields, and to suppress fieldsfrom the screen. For the new outpatient variants for the Clinical Process Builder, SAP provides additionaltransaction variants that support presettings in accordance with the case category. To enable you todirectly call a variant with the associated transaction variant, a transaction is provided for eachcombination. The following new combinations are provided:
- NV2000 variant SAP ACM Panel Physician AssociationTransaction variant: SAP_AMB_KVVariant transaction: NV2000_AMB_KVShort description: Panel Physician Treatment
- NV2000 variant SAP ACM Workers' CompensationTransaction variant: SAP_AMB_BGVariant transaction: NV2000_AMB_BGShort description: Workers' Compensation Treatment
- NV2000 variant SAP ACM Emergency AdmissionTransaction variant: SAP_AMB_NAVariant transaction: NV2000_AMB_NAShort description: Emergency Admission
- NV2000 variant SAP ACM Privately InsuredTransaction variant: SAP_AMB_PVVariant transaction: NV2000_AMB_PVShort description: Private Physician Treatment
- NV2000 variant SAP ACM CompleteTransaction variant: SAP_AMB_ALLVariant transaction: NV2000_AMBShort description: All Variants
Single Elements of Variant Determination
You can enhance or create your own variants for the Clinical Process Builder using the new singleelements. The system provides the following new single elements for the Clinical Process Builder:
- ACM: Patient Name 1 subscreenTrimmed-down version of the Name subscreen for more concise entry of patient data.
- ACM: Case Data subscreenTrimmed-down version of the Case subscreen for more concise entry of case data.
- ACM: Situations/> subscreenNew subscreen for displaying and assigning work situations for/to a patient.
______________________________________________________________SAP AG 12
SAP-System______________________________________________________________
- Outpatient Copayment subscreenNew subscreen for entering the patient's outpatient copayment.
The following new tab pages are provided to clearly organize the tab pages the Clinical Process Builder:
- Outpatient Copayment tab page
- Work Situations tab page
- Visit Data tab page
- Diagnoses tab page
- Case Data tab page
- Patient tab page
- Accident Data tab page
- Insurance Relationship tab page
- Other Data tab page
- Referral Data tab page
Enhanced Variation Determination
Two new columns have been added for the maintenance of variant determination for the Clinical ProcessBuilder (choose SAP Healthcare - Industry-Specific Components for Hospitals -> Basic Settings-> Screen Control -> Determine Variant of Clinical Process Builder):
- Case CategoryYou can enter the case category as a key field. It will then be used to select the variant and thetransaction variant. If you do not make an explicit entry, the system sets the value "*" for the CaseCategory field.
- Transaction VariantUp to now, the system determined the variant for the Clinical Process Builder using this table. Thesystem now determines the transaction variant from the table too. You can create and incorporateyour own transaction variants.
Effects on Existing Data
These new features do not affect existing variants. The enhanced maintenance of variant determinationfor the Clinical Process Builder may require you to adjust existing Customizing entries.
The enhancement to the table NWPLACE_DTM (Determination of Variants for Clinical Process Builder)is implemented by an XPRA.
Effects on Customizing
To use this function, you must activate the business function SAP Ambulatory Care Management(ISH_AMBULATORY).
You store the entries for determining the variants and transaction variants for the Clinical Process Builder
______________________________________________________________SAP AG 13
SAP-System______________________________________________________________
in the IMG activity Determine Variant for Clinical Process Builder (choose SAP Healthcare -Industry-Specific Components for Hospitals -> Basic Settings -> Screen Control in the IS-HImplementation Guide.
See also
For more information, see Healthcare -> SAP Patient Management -> Clinical Process Builder ->Create Transaction Variants in the SAP Library, and the following release notes:
- Case Category (New for All Countries Except AT/CH)
- DE: Outpatient Copayment/Practice Fee (New)
- Outpatient Documentation Work Station (New)
37.6.3.4 Renewable Document Management in Clinical Process Builder (New)
Use
As of SAP ECC Industry Extension Healthcare 6.0, you can avail of renewable documentmanagement.
The following subareas belong to renewable document management:
- Overview of all of the patient's renewable documents
- Edit a renewable document
A renewable document is assigned to a patient.
The new features in detail:
- Overview of All Renewable Documents for a PatientThe renewable document management overview contains all of the renewable documents for thepatient. The system displays these in a tree structure in which a node always contains a renewabledocument chain. The overview row of a renewable document chain contains summarizedinformation on the various renewable documents.
- Edit a Renewable DocumentAs part of the renewable document management process, you can enter renewable documents andrenewable document chains for a patient. A renewable document chain starts with an initialdocument and contains any number of renewed documents.(In the country version Spain, a renewable document chain also contains a final document).A renewable document can be assigned to the category "Work Incapacity":
- In such cases, the system displays the fields for entering the work incapacity data.
- Otherwise, the system does not display the fields for entering the work incapacity data.
The authorization object N_REDOMA enables you to control which functions the user is allowed toexecute in renewable documentation management.
______________________________________________________________SAP AG 14
SAP-System______________________________________________________________
Procedure
1. To access change mode, launch the transaction NREDOMA1; to access display mode, launch thetransaction NREDOMA2.
2. Select a patient. You are now in renewable document management and see the overview of all of therenewable documents for the selected patient.
3. Double-click the node for a single renewable document and the system displays the details for thisrenewable document.
4. You can now create new renewable documents, change or cancel existing renewable documents, orprint the renewable documents.
Effects on System Administration
The system behavior depends on the users' authorizations:
- Activity Create
- Activity Display
- Activity Change
Effects on Customizing
To use this function, you must activate the business function SAP Ambulatory Care Management(ISH_AMBULATORY).
You can make the following settings in Customizing for SAP Patient Management (IS-H) by choosingSAP Healthcare - Industry-Specific Components for Hospitals -> Ambulatory Care Management-> Administration -> Renewable Document Management:
- Maintain Document TypesFor more information, see SAP Healthcare - Industry-Specific Components for Hospitals ->Ambulatory Care Management -> Administration -> Renewable Document Management -> Define Document Types in the IS-H Implementation Guide.
- Maintain Document Type AssignmentsFor more information, see SAP Healthcare - Industry-Specific Components for Hospitals ->Ambulatory Care Management -> Administration -> Renewable Document Management:Maintain Document Type Assignments.
- BAdI: Renewable Document Management - Process Customer-Specific DataThe BAdI is located under SAP Healthcare - Industry-Specific Components for Hospitals ->Ambulatory Care Management -> Administration -> Renewable Document Management inthe IS-H Implementation Guide.
- BAdIs for Presetting and Checking the Renewable Document Data in the Transaction NV2000.For more information about the implementation of the BAdIs for the Clinical Process Builder, seeSAP Healthcare - Industry-Specific Components for Hospitals -> Patient Management ->Patients -> Business Add-Ins for Patient Admission in the IS-H Implementation Guide.
______________________________________________________________SAP AG 15
SAP-System______________________________________________________________
See also
For more information about renewable document management, see Healthcare -> SAP PatientManagement -> SAP Ambulatory Care Management -> Administration -> Renewable DocumentManagement in the SAP Library.
37.6.4 IS-H-ACM-TMT Treatment
37.6.4.1 Support for Outpatient Treatment Processes (New)
Use
As of SAP ECC Industry Extension Healthcare 6.0, the role-based work station concept is extendedto the outpatient treatment area in SAP Ambulatory Care Management (SAP ACM). In this connection,the Outpatient Documentation Work Station is provided to display the relevant tasks for processing,dependent on the respective treatment situation. The context-sensitive display of relevant documentssimplifies processing when you are entering and completing tasks.
This now makes it possible to depict complex work situations that require the processing of the currentdocumentation and simultaneous access to the electronic patient record. The predefined list of tasks forcompletion provides a powerful tool for quickly and efficiently processing the documentation steps forthe patients in the outpatient clinic.
Through the predefinition of task sets for particular work situations ("what routinely has to be done whena patient attends my clinic"), the Outpatient Documentation Work Station helps ensure the quality of thetreatment in your clinic.
The Outpatient Documentation Work Station provides you with all of the documentation objects andforms that are necessary for the outpatient treatment role.
SAP ACM provides the new documentation object outpatient clinic folder that accommodates thedocumentation of medical progress. In this context, the key forms of the Panel Physician Associationand the key forms of Workers' Compensation Accident Insurance are now available.
Effects on Customizing
To use this function, you must activate the business function
SAP Ambulatory Care Management (ISH_AMBULATORY).
See also
For more information, see the following release notes:
- Outpatient Documentation Work Station (New)
- Outpatient Clinic Folder (New)
______________________________________________________________SAP AG 16
SAP-System______________________________________________________________
- DE: Panel Physician Association (PPA) Forms (New)
- DE: Workers' Compensation Forms (New)
37.6.4.2 Outpatient Documentation Work Station (New)
Use
As of SAP ECC Industry Extension Healthcare 6.0, the Outpatient Documentation Work Stationprovides you with a new means of quickly and easily completing documentation tasks in the outpatientarea.
The Outpatient Documentation Work Station depicts work situations of the outpatient facility, forexample, consultations and workers' compensation initial treatment, with their tasks, and makes availablethe appropriate information for each situation.
Concepts
The following concepts play a key role in the Outpatient Documentation Work Station:
Situation
Situations are used to group together tasks that have to be completed by different persons andoccupational groups in an actual treatment situation. The user assigns these tasks to the patients in theform of a situation to enable the tasks to then be processed in the Outpatient Documentation WorkStation.
It is recommended that the system administrator or user create situations that do not comprise too manytasks (approximately 15-20). The time for fully processing a situation should not exceed one day. It isrecommended that you only depict one case or visit in a situation.
Situations must be closed. For each situation you can stipulate whether the system is to do thisautomatically after all the tasks have been completed, or whether the user must close the situationmanually.
Situations are temporary objects. After the situation has been closed, it is removed from the system by adeletion program. You stipulate the interval at which this program runs in the situation template.
Profile
Profiles are used to group together tasks to facilitate the selection when assigning new tasks. You createprofiles in template management (transaction code N2WLD). You can use them when creating situationsor when adding tasks to a situation.
Task
Tasks depict the documentation- or information steps required for the treatment.
In template management, you give descriptive names to the tasks and you can link the tasks with "baseitems". The base item controls which documentation object the user can create, edit, or view. Taskswithout related actions can be used for informational purposes, or as reminders of important treatmentsteps that are not directly depicted in the system (such as, inform relatives).
You can also link a task with an "info item". When the task is used, this controls which aspects thesystem is to display in the patient viewer, and thus which extracts from the patient's medical record the
______________________________________________________________SAP AG 17
SAP-System______________________________________________________________
system is to display for a specific task.
Tasks are not inter-related. You cannot depict dependencies, such as "You cannot complete a task untilyou have...".
You can designate tasks as required tasks. You cannot close a situation that contains required tasks untilthe status of all required tasks has been set to Completed or Canceled.
Like a situation, a task is also a temporary object. It is deleted with the situation by the system.
Template
Templates comprise the definition data for situations and tasks. The system only creates the actualsituation with reference to the patient from the situation template when the patient is assigned. When youprocess a situation for the first time in the Outpatient Documentation Work Station, the system createstasks from the task templates.
You edit templates in template maintenance.
Work Station Layout
The Outpatient Documentation Work Station enables you to display different components concurrentlyon screen. The basic structure is preset. However, you can, if need be, show or hide the variouscomponents, and resize them using the mouse. You can save all layout settings as personal settings.
Components in the Standard System
To optimally depict work situations in the Outpatient Documentation Work Station, the standard systemprovides different components:
Task List
The task list is the central tool for displaying all of the tasks defined for the situation. It containsinformation about the status of the task. When you click a task name, the work station displays adocumentation interface corresponding to the task. You see relevant extracts from the patient's medicalrecord in another component.
For more information, see the release note Outpatient Documentation Work Station: Task List(New).
Patient Viewer
This component initially displays relevant sections of the electronic patient record for the situation, orspecific sections for each task. This information is displayed in a list, or in a tree structure. When youclick an object, a corresponding detailed display opens.
For more information, see the release note Patient Viewer (New).
Documentation Object
The documentation objects are the processing programs linked with the tasks, to a large extent as they areprovided elsewhere in the system.
The standard system contains the following documentation objects:
- Diagnoses
- Procedures
- Administrative services
______________________________________________________________SAP AG 18
SAP-System______________________________________________________________
- Medical services
- Selected forms of the Panel Physician Association (DE)
- Selected forms of the Workers' Compensation Accident Insurance (DE)
- Problems for the problem-oriented record
- Outpatient clinic folder
Appropriate settings enable information to be displayed in a browser (URL). Furthermore, it is possible toprint forms and call transactions of your choosing.
The implementation of a BAdI enables the execution of additional, customer-specific actions.
The documentation objects are displayed in the upper right screen area of the work station.
Toolbar
To supplement the task list functions, you can also display a toolbar. The pushbuttons displayed in thistoolbar are selected from a standard function list in Customizing. You can define which functionscomprise the toolbar for each situation template.
The toolbar is displayed at the upper edge of the work station.
Other Information Components
In addition to the patient viewer, other components are provided for the display of information:
- Work station header
- Patient overview
- Context view
For more information, see the release note Outpatient Documentation Work Station InformationComponents (New).
Accessing the Outpatient Documentation Work Station
You open the Outpatient Documentation Work Station from the Clinical Work Station (view typeOutpatient Clinic).
Three new pushbuttons are provided for this purpose in the function list:
Assign Situation
This function enables you to select one or more situation(s) proposed in a list, and assign them to thepatient. The system compiles this list of proposed situations on the basis of criteria such as case category,movement type, and organizational unit. You can display all of the available situations rather than theproposal list.
This assignment dialog is also provided in the Clinical Process Builder to enable the assignment to bemade during the admission process.
Once the assignment is made, you can either return to the Clinical Work Station, or switch into theOutpatient Documentation Work Station.
If you select several patients in the Clinical Work Station, you can assign the selected situations to themin the same processing step.
Edit Situation
______________________________________________________________SAP AG 19
SAP-System______________________________________________________________
This function enables you to edit an assigned situation for one or more selected patients. The list ofassigned situations is displayed in a dialog box. If you select several patients, the system only displays thesituations that are assigned to all of the selected patients.
You can also assign and edit other situations. You can view a list of all situations that were edited andclosed earlier, and select a closed situation to be displayed.
Double-clicking a situation opens the Outpatient Documentation Work Station.
Create Situation
If particular situations have still to be defined in the system, you can group together tasks, as required, forone or more patients yourself. You open a dialog box with a structured catalog containing all of theprofiles and tasks available in the system. The tasks you select are combined in a situation and can thenbe processed in the Outpatient Documentation Work Station. The system does not save situations createdlike this as templates.
If users consistently need to create the same or a similar situation, it is recommended that you create anappropriate situation template.
Information can be provided for each task, if stored in Customizing.
Clinical Work Station Column Set
The column set for the view type Outpatient Clinic/Service Facility been enhanced.
A text, or a situation icon or task icon shows you that there are still open tasks for a patient.
If you have stipulated for organizational reasons that open situations are not closed automatically, it isrecommended to display both columns. You can immediately see whether tasks still have to becompleted, or whether open situations exist.
If only one situation is assigned, clicking the situation directly opens the Outpatient Documentation WorkStation with the situation.
If several situations are assigned, clicking the icon opens the Edit Situation dialog and you must selectthe required situation.
The occupational groups responsible for open tasks are displayed in another column.
For information on setting up the Outpatient Documentation Work Station, see the release noteOutpatient Documentation Work Station: Template Maintenance (New).
Effects on Customizing
To use this function, you have to activate the business function SAP Ambulatory Care Management(ISH_AMBULATORY).
______________________________________________________________SAP AG 20
SAP-System______________________________________________________________
37.6.4.3 Outpatient Documentation Work Station: Task List (New)
Use
As of SAP ECC Industry Extension Healthcare 6.0, the Task List component is provided for use inthe Outpatient Documentation Work Station.
The task list shows all of the tasks that can be processed for the selected patient in the selected situation.
The task list can serve as a simple navigation tool by means of which you switch from one documentationinterface to the next. It can also be used as an instrument of control for the cooperation between thedifferent occupational groups and persons in the outpatient facility. For this reason, it has columns thatprovide information about the responsibilities for, and the processing status of a task.
By means of a simple mouse-click (select), each task can display or create an assigned documentationobject. The next time you select the task, the system displays the created object. In template management,you can stipulate whether the object is to be provided for display or further processing. The task that isbeing processed is identified by an icon (light bulb).
Other columns contain the processing status, the action icon, the task name, the required task icon(optional), a task note (optional), and the responsible occupational group.
Task List Functions
The following functions are provided as pushbuttons in the task list or in the context menu for the tasksand situations:
- Complete TaskSets the status of the selected task to completed. This tells other users that this part of the treatmenthas been completed.
- Cancel TaskCancels a task. This shows that this task need not be completed in this situation.
- Add TaskOpens a dialog box where you can add other tasks to the current situation. The system displays astructured catalog containing all of the active task templates and profile templates for which theAvailable in Selection indicator is set. Profiles make it possible to add a group of task templates. Itmay be necessary to add tasks when particularities arise during the patient's actual treatment thatwere not taken into account in the situation.
- Close SituationCloses a situation after completion or cancellation of at least all required tasks. Tasks that are notcompleted and that are not required tasks can be automatically canceled when the situation is closed.Closed situations are no longer displayed in the selection list for processing situations.
- Create Situation NoteOpens a note box in which you can enter a note, or view or edit a note previously entered for thissituation. If a note exists, this is shown by an icon.Since this note function is also provided in the assignment dialog, the admitting clerk can enterorganizational information here that can then be accessed during the treatment. Since this note isdeleted together with the situation, it is recommended that you do not document treatment data here.
- Edit LayoutEnables adjustments to be made to the layout of the task list. You can suppress columns that are not
______________________________________________________________SAP AG 21
SAP-System______________________________________________________________
required. The layout is saved on an individual user basis.
- Show Situation ListDisplays the situation list, even when only one patient was selected in the Clinical Work Station.
- Show Detailed ViewOpens an information area. An information column is also added to the lists. When you click theinformation icon there, the system displays the information stored for situations or tasks.
- Create Task NoteYou can create a note for each task by clicking the Note column, or via the context menu. If a noteexists, this is shown by an icon.
If the task list is opened for several patients, all of the situations for these patients are displayed in asecond list. The list of tasks displayed always relates to the selected situation.
The task list is displayed in the upper left screen area of the work station.
You can predefine the grouping together of tasks. For more information about this, see the release noteOutpatient Documentation Work Station: Template Maintenance (New).
The Task List component is only available in the Outpatient Documentation Work Station.
Effects on Customizing
To use this function, you must activate the business function SAP Ambulatory Care Management(ISH_AMBULATORY).
37.6.4.4 Patient Viewer (New)
Use
As of SAP ECC Industry Extension Healthcare 6.0, SAP Ambulatory Care Management providesthe patient viewer for displaying information from the electronic medical record in the OutpatientDocumentation Work Station. The patient viewer contains the information from the medical record that isrelevant to the task being processed.
Example
If you wish to issue a prescription for a patient (corresponds to a task in the Outpatient DocumentationWork Station), it makes sense for you, as the person issuing the prescription, to view the prescriptionsthat have already been issued for the patient when performing this task. This enables you to prescribe thesame drugs again. This example can be applied to numerous documentation tasks.
Availability of Patient Viewer and Patient Organizer
The patient viewer is a tool which is derived from the patient organizer. The operation of the patientviewer largely corresponds to the operation of the patient organizer. How the patient viewer works only
______________________________________________________________SAP AG 22
SAP-System______________________________________________________________
differs in details from how the patient organizer works.
The patient viewer is an integrated part of the Outpatient Documentation Work Station and can only beactivated with the latter.
The patient organizer is a separate function, which, as previously, is provided in i.s.h.med.
Task-Dependent Presentation of the Medical Record
As in the patient organizer, the aspect in the patient viewer also comprises the set of all methods forstructuring and displaying the medical record. You can use aspects provided with the standard system, ordefine aspects of your own. For more information about setting up and managing aspects, see the releasenote Patient Organizer: Aspect Maintenance Function (New).
To assign aspects to a situation template or a task template, you create information items (info items). Formore information about creating info items, see the release note Outpatient Documentation WorkStation: Template Maintenance (New).
The following options are provided for maintaining the task template:
- Do not Change: The patient viewer is not updated when this task is called. The same aspects aredisplayed as prior to the task being called. You should make this setting for all tasks that generallydo not require information from the patient's medical record (for example, form printout).
- Display User-Specifically: When the task is selected, the system displays all of the aspects that areassigned to the user directly or using the role. You maintain these settings with transaction N10W.
- According to Situation: As when the task is selected, the info item of the situation should be used(see below).
- Control Using Separate Info Item: The system displays the aspects of the info item in the patientviewer.
The following options are provided for maintaining the situation template:
- Do not Change: The patient viewer is not updated when this situation is called. The same aspects aredisplayed as prior to the situation being selected.
- Display User-Specifically: When the situation is selected, the system displays all of the aspects thatare assigned to the user directly or using the role. You maintain these settings with transactionN10W.
- Control Using Separate Info Item: The system displays the aspects of the info item in the patientviewer.
Patient Viewer Functionality
The functionality of the patient viewer is limited to display and navigation functions. You cannotcreate, change, nor cancel any elements of the medical record. The patient viewer is always visible in thecontext of the Outpatient Documentation Work Station.
The navigation functions comprise the switching of aspects and navigation to the individual medicalobject via the overview display. To keep the documentation process in the Outpatient DocumentationWork Station always parallel to the navigation in the medical record, the patient viewer does not supportall of the detailed display formats of the patient organizer. The patient viewer only supports the integrateddetailed displays (HTML or PDF displays) and modal dialog boxes. Moreover, the patient viewer onlyauthorizes display classes that transfer pure display functions.
The following detailed displays are allowed:
______________________________________________________________SAP AG 23
SAP-System______________________________________________________________
- Display clinical order in print preview (CORDER_PRN)
- Display documents in PDF or HTML print preview (DOC_PDF)
- Display of appointments and movements (MOV_DISP)
- Outpatient clinic folder (OPDCHART)
- Display requests in PDF print preview (REQ_PDF)
- HTML display of medical services (SER_HTML)
- Diagnoses display in a dialog box (DIA_DISP_P)
- Medical record display in a dialog box (MR_DISP_P)
- Procedures display in a dialog box (PRC_DISP_P)
Effects on Customizing
To use this function, you must activate the business function SAP Ambulatory Care Management(ISH_AMBULATORY).
See also
For more information about the Outpatient Documentation Work Station, see the release note OutpatientDocumentation Work Station (New).
37.6.4.5 Outpatient Documentation Work Station: Information Components(New)
Use
As of SAP ECC Industry Extension Healthcare 6.0, in addition to the Patient Viewer, you areprovided with additional components for displaying fixed information in the Outpatient DocumentationWork Station:
- The work station header displays limited information about the treatment context. This constantlyreminds the user about which patient he or she is processing in which environment. The workstation header cannot be suppressed from the screen and is displayed in the upper screen area.
- The patient overview shows more detailed, selected data on the patient, including master data, casedata and visit data, or admission notes. The patient overview is displayed in the upper right area ofthe screen when you access the work station. When a documentation object is in processing, thesystem suppresses the patient overview from the screen.
- The context view shows technical data of the work station. All of the information that is available tothe work station for presetting documentation objects, is displayed. Since this is seldom of interest,you have to trigger the display of the context view using a pushbutton.
______________________________________________________________SAP AG 24
SAP-System______________________________________________________________
Effects on Customizing
To use this function, you must activate the business function SAP Ambulatory Care Management(ISH_AMBULATORY).
37.6.4.6 Outpatient Documentation Work Station: Template Maintenance (New)
Use
As of SAP ECC Industry Extension Healthcare 6.0, together with the Outpatient DocumentationWork Station you are provided with an application for maintaining situation templates and task templates.
The application for template maintenance (transaction code N2WDL) provides system administrators andexperts with a tool to simply and efficiently process the key objects for configuring the OutpatientDocumentation Work Station.
Structure of the Processing Dialog
The tree structure in the left screen area contains all the situation templates, profile templates, and tasktemplates (catalog), with the base items and info items in a respective additional tree structure. Youaccess aspect maintenance when processing info items by choosing Goto -> Manage Aspects in themain menu, or by launching the transaction N2ASPECT_DEF.
You can create groups in the tree structure to store numerous templates in a structured, content-basedmanner.
The editing functions for the objects are available as pushbuttons or in the context menu for the group.
Depending on the object selected, the system displays a detailed view in the right screen area, whichenables the various properties of the various objects to be edited.
You can display all of the objects created or edited in a work session in a worklist by choosing Utilities-> Display Worklist. Selecting objects in this list takes you directly into the transaction for processingthe object. You can also activate all of the displayed objects concurrently.
Users can tailor the layout of the maintenance dialog to satisfy their own requirements, and can save themodified layout for future use.
Editable Objects
- Situation TemplatesThese constitute the "containers" for the task templates. Use a descriptive name that enables users tomake the appropriate selection during the patient's treatment.Among the possible specifications you can make, you can stipulate the time for automatic closing(forgotten situations) and the interval after which the situation is to be deleted automatically.You can link the situation template with an info item. This stipulates which aspects are displayed inthe Patient Viewer when the Outpatient Documentation Work Station is called, prior to the first task
______________________________________________________________SAP AG 25
SAP-System______________________________________________________________
being processed.You can store an information text. The user can view this text and thus be given importantinformation about the use of this situation.By specifying organizational units, case categories, and movement types, you can stipulate the caseconfigurations for which this situation is to be proposed. Multiple specifications and exclusions arepossible.To assign profile templates and task templates to the situation template, you can select these from aselection list. It is also possible to assign them directly from the template subtree using drag anddrop. You can define the sequence in which the tasks are displayed later in the task list.To use situation templates in proposal lists, you must activate them.
- Function VariantsYou can maintain and assign a function variant in the detail view for situation variants. Thisspecifies which function buttons are displayed in the toolbar for this situation.
- Profile TemplatesYou can also store an information text for profile templates. It can provide the user with importantinformation about the use of the task sets in the selection dialog for task templates.You also define a structure for profile templates. Similarly to situation templates, you can assigntasks that were defined beforehand.To use profile templates in proposal lists, you must activate them.
- Task TemplatesUse a descriptive name.You can also store an information text for task templates, which can provide the user with importantinformation about the use or completion of this task.You can link task templates with a base item. This stipulates which system action the user triggerswhen he or she chooses a task in the task list of the Outpatient Documentation Work Station.Link the task templates with an info item to stipulate which aspects are displayed in the PatientViewer when the user clicks this task in the task list.To use task templates in proposal lists, you must activate them.
- Base ItemsBase items establish which system action is triggered. With some base item types, you can enterdata that is used by default when an object is created (for example, document).You can create general, but also highly specific base items. This enables you to very preciselypredefine the application behavior and relieve the user of many work steps and decisions.The base item types in the standard system enable you to create base items, or edit existing ones.Base items have different detail views according to their types. For all of them, however, you canselect a descriptive name and also enter a text that appears as a quick info above the task icon in thetask list.Two BAdIs are implemented for all base item types, by means of which you can modify thebehavior before and after execution.Base items can only be executed without activation on systems that are defined as test systems.For more information about base items, see the release note Base Items (Enhanced).
- Info ItemsInfo items establish which information is displayed in the Patient Viewer in the OutpatientDocumentation Work Station. Assign aspects in the detail view. The sequence of the aspects youdefine here sets the display sequence in the Patient Viewer. Select the aspect that is to be initiallydisplayed in the Patient Viewer, independently of the display sequence.
- Aspects
______________________________________________________________SAP AG 26
SAP-System______________________________________________________________
The standard system contains numerous aspects that display the entire contents of the electronicpatient record partially classified by case or movement, or according to different periods. There isalso an aspect for each object type to enable only specific contents to be displayed.You can define additional aspects to obtain a more detailed combination of the contents of theelectronic patient record, tailored to a task.To do this, create a new aspect. Use a short, descriptive name, since this also serves as the label forthe pushbuttons in the Patient Viewer.Then assign views, which dispose of the required selection variants, from the catalog of availableviews.You can test an aspect in the maintenance dialog. To do this, first select a test patient (chooseUtilities -> Edit/Display Test Patient). You can then view the aspect as it is displayed in thePatient Viewer (choose Aspect -> Test).
- ViewsIn aspect maintenance, you can add to the view catalog in the standard system. To do this, create anew view and maintain suitable selection variants.
Procedure
Since templates are complex, we strongly recommend that you create situation templates in a planned andsystematic manner. Whenever possible, we recommend that you create the situation templates starting onthe detail level and working upwards (views - aspects - info items, BAdIs - base items, objects - baseitems, task templates - profile templates - situation templates).
The structure and function of template management, however, also support the reverse procedure. To usea situation template, you need only enter a few properties.
As the simplest example, you could assign only a few tasks - which, besides administrative data, just havea descriptive name, but no link to base items or info items - to a situation template. In this way, you canquickly create a checklist that can be assigned to the patient's treatment episode.
In the next step, you can enter information texts for the task templates so that the checklist providesspecific information and can thus better support the work process.
In this way, you can successively activate all of the options provided by the situation templates, until allfunctions optimally support the user in his or her routine work.
Template maintenance is designed in such a way that the objects are to be processed only on thecustomer's development system. Consequently, all of the template maintenance objects are connected tothe transport system and can be easily transported to the follow-on test system and finally to theproduction system. All objects must be activated prior to transport.
The respective processing status of the templates is depicted through a text and in color in the treestructure of the templates. A template can have the statuses NEW (gray), PROCESSED (blue), andACTIVE (black). The selection lists only contain active templates.
When you edit an activated template, its status is modified. The activated version, however, remainsavailable. To discard changes, the function Situation Template -> Back to Active Version is provided,which restores the most recently activated version.
The system does not overwrite the previously active version until the changes are activated. The selectiondialogs then only contain the changed templates. Template versioning is not accommodated.
A where-used list is provided for profile templates and task templates. This enables you to find out aboutexisting dependencies before changing or deleting objects.
______________________________________________________________SAP AG 27
SAP-System______________________________________________________________
Effects on Customizing
To use this function, you must activate the business function SAP Ambulatory Care Management(ISH_AMBULATORY).
37.6.4.7 DE: Panel Physician Association (PPA) Forms (New)
Use
This release note is relevant for the country version Germany only. Documentation is not available inEnglish.
37.6.4.8 DE: Workers' Compensation Forms (New)
Use
This release note is relevant for the country version Germany only. Documentation is not available inEnglish.
37.6.4.9 Outpatient Clinic Folder (New)
Use
As of SAP ECC Industry Extension Healthcare 6.0, you can use the outpatient clinic folder todocument the progress of outpatient treatment in SAP Ambulatory Care Management.
The outpatient clinic folder supports a form of medical documentation commonly used in the outpatientarea, in which information about visits is stored in note form. Typically, these notes are displayed inchronological order.
Concepts
Outpatient note: Single entry in the outpatient clinic folder. A note can be an initial entry or asupplement.
Outpatient clinic folder: Sum total of all outpatient notes.
Entry/Change Dialog
You can create outpatient notes in the Clinical Work Station (Outpatient Clinic/Service Facility viewtype) and in the Outpatient Documentation Work Station.
______________________________________________________________SAP AG 28
SAP-System______________________________________________________________
In the Outpatient Clinic/Service Facility view type, you can call the entry/change dialog using apushbutton.
In the Outpatient Documentation Work Station, you can define task templates that enable the creation andmodification of outpatient notes.
The management data of a note is preset. Additionally, you can set the reference level for a note:
- VisitThis is the default standard behavior, since the entry is made concurrently to the visit. The systemassigns the start of the current visit as the note's reference date/time.
- CaseIf, exceptionally, a note is created for the case, the system assigns the start of the current case as thenote's reference date/time.
- User-Defined DateIf a note is entered without reference to a case or a movement, you can enter a date of yourchoosing; the system proposes the current date. This user-defined date can be used, for example, todocument contacts with the patient that occur between the actual visits (for example, phone call tothe family physician, phone consultation with the patient).
Alternatively, before a new entry is created, a dialog box with the patient's case- or visit list is opened,from which you can select an outpatient visit other than the current one, or from which you can create anew outpatient visit. These alternatives are controlled by means of the user parameter N2OPDCHART.
You can enter a short text that is displayed (20 characters max.) in the table view of the Patient Viewer. Ifyou do not enter a text, the system transfers the first 20 characters of the note into this field the first timeyou save the note.
Once you have released a note, you can no longer change it. You can, however, enter supplements forreleased notes. The system automatically creates supplements when you try to change a released note.You can also create a new note and set the Suppl. indicator. The system displays a list of all the releasednotes, from which you can select the reference note. You can view the full text of the reference note bychoosing Outpat. Note.
You cannot create supplements for notes with the status In Process; these notes can be changed directly.
You can enter any text as a note. To simplify the entry of standard texts, you can use and also enter textmodules (input help in the note field).
View
The view of the outpatient notes takes the form of an overview of all of the notes in chronological order.The earliest entry is output at the head of the list. The sort criterion is the date of the selected referencelevel. Supplements are not sorted by reference date/time, but directly by reference note.
The entire set of notes is thus displayed in a chronologically logical context and you are provided with aquick overview of the outpatient treatment process.
You can view the outpatient notes in the Clinical Work Station (Outpatient Clinic/Service Facility viewtype), or by selecting an appropriate aspect in the Patient Viewer of the Outpatient Documentation WorkStation.
Adjusting the Outpatient Clinic Folder
You can adjust the look and functions of the outpatient clinic folder in a number of ways:
______________________________________________________________SAP AG 29
SAP-System______________________________________________________________
- Tree displayThe options for designing aspects in the patient viewer enable you to arrange and sort the entries tobest suit users' requirements.
- Entry/change dialogYou can adjust the content and layout of the change dialog by means of the BAdI interface for theprogress documentation.
- Detail window displayThe customer enhancement IS-H*MED_VD_VIEW in the programming interface for the progressdocumentation IS-H*MED_VD_API enables you to create specific filters that determine the scopeof the data displayed in the detail window. The standard system provides an XML-based view and aview based on a dynamic document.You can integrate your own style sheet into the XML-based view and thus extensively modify thelayout of the display. The standard system provides the style sheet ISHMEDVDA.
- Print outputYou can adjust the layout and content of the print output by substituting the standard Smart Form.The standard system provides the Smart Form N3OPDCHART.
Effects on Customizing
To use this function, you must activate the business function SAP Ambulatory Care Management(ISH_AMBULATORY).
37.6.4.10 Health Problem Documentation (New)
Use
As of SAP ECC Industry Extension Healthcare 6.0, you can document health problems in SAPAmbulatory Care Management.
In contrast to a case, where billing aspects are the key focus, health aspects are the focus of a healthproblem.Any of a patient's symptoms that require medical attention are understood by the term "health problem".
You enter and manage health problems in the Outpatient Documentation Work Station. You can alsoadministrate problems in the Patient Organizer.
In the Outpatient Documentation Work Station, you can document health problems by means ofindividual tasks. You have to create a task that is used to call the desired function. This may be thecreation of a problem. You can also set the problem interactively. For more information about tasks, seethe release notes Outpatient Documentation Work Station (New) or Outpatient Documentation WorkStation: Task List (New).
The following functions are provided for administrating health problems in the Patient Organizer:
______________________________________________________________SAP AG 30
SAP-System______________________________________________________________
- Create Problem
- Activate/Deactivate Problem
- Assign Objects to Problems
You can document the following objects in relation to health problems in the OutpatientDocumentation Work Station and Patient Organizer):
- Movements
- Appointments
- Medication orders
- Clinical orders
- Progress documentation entries
- Documents
Problem-related functions:
- Create ProblemThis function is provided via the corresponding tasks in the Outpatient Documentation WorkStation and also in the Patient Organizer.
- Create Objects for a ProblemYou can create objects, such as appointments, clinical orders, for a problem.
- Activate/Deactivate ProblemDepending on whether the problem is currently active or inactive, the respective function isavailable in the context menu. You can complete a problem or deactivate it by selecting thecorresponding checkbox. You can also show or hide inactive (completed) problems in the contextmenu.
- Assign Objects to a ProblemIf objects were assigned to a problem by mistake, or if the problem reference subsequently changes,you can modify the assignment of the objects to a problem.
- Display/Change ProblemUse this function in the context menu to display or, if necessary, change the header data of aproblem.
Effects on System Administration
You can import your own health problem catalogs. To do this, use the program RN1STRUCMRCAT:
1. Save a text file, separated by commas, locally.
2. Declare the storage location in the above named program. The program imports the data into theproblem catalog table N1STRUCRECMEDCCAT.The catalog ICPC2 from the WONCA organization was used as a reference catalog duringdevelopment. This catalog contains a field labeled Component. By definition, problems can onlybe created from the components 1 and 7. Thus if you select a problem with a component from 2 to 6,
______________________________________________________________SAP AG 31
SAP-System______________________________________________________________
the system issues a corresponding warning message. You can ignore this message and go ahead andsave the problem, or return to the selection and select another problem.Moreover, you can enter your own text and select an employee responsible (EmR).
Effects on Customizing
To use this function, you must activate the business function SAP Ambulatory Care Management(ISH_AMBULATORY).
To use the functionality, you must activate problem-oriented documentation using the system parameterN1STMREC.
To make problem entry available to users in the patient organizer, you must create an appropriate aspect.
For more information about defining aspects, see the release note Patient Organizer: Aspect MaintenanceFunctions (New).
To stipulate whether inactive problems are to be displayed by default, set the user parameterN1_NO_COMPLETED_PROB.
37.6.5 IS-H-ACM-BIL Billing
37.6.5.1 SAP Ambulatory Care Management: Outpatient Billing (New)
Use
As of SAP ECC Industry Extension Healthcare 6.0, flexible support for a variety of outpatient billingmethods in the hospital is provided by SAP Ambulatory Care Management.
These functions concern a range of features, from service entry and possible service remapping, to thedetermination of multiplication factors and through to the determination of a separate company code forchief physician billing.
Effects on Customizing
To use this function, you must activate the business function SAP Ambulatory Care Management(ISH_AMBULATORY).
See also
For more information about the functions for simplifying outpatient billing, see the following releasenotes:
- Service Remapping
- Rule for Service Remapping (R18) (New)
- Service Rule Control (New)
______________________________________________________________SAP AG 32
SAP-System______________________________________________________________
- Determination of Multiplication Factor (Enhanced)
- Separate Company Code for Direct Patient Billing (New)
37.6.5.2 Service Remapping (Enhanced)
Use
As of SAP ECC Industry Extension Healthcare 6.0, service remapping is enhanced as follows:
- You can directly call service remapping from service entry.
- Service remapping supports 1:N remappings.The 1:N remapping enables you to remap an original service to N billing services. The system fillsthe billing service for the original service. For the remaining N-1 services, the system generatesdummy services from the in-house service catalog and fills their billing services in accordance withthe 1:N remapping defined in Customizing.
- You can activate the remapping with a service rule for selected events.For more information about this, see the release note Service Rules for Service Remapping (New).
You can call the service remapping in service entry by means of a pushbutton. This enables you to see thebilling services to which the system remaps the services you have entered, prior to billing.
The service remapping fills the billing catalog and the billing service in service entry in accordance withthe entries for service remapping that were made in Customizing. In the process, the service from thein-house service catalog is retained.
Effects on Customizing
To use this function, you must activate the business function SAP Ambulatory Care Management(ISH_AMBULATORY).
To use service remapping, you must make the following Customizing settings:
- Enter a service created for this purpose in the in-house service catalog as the dummy service.
- In the IMG activity Define Assignment Types, define an assignment type for the dummy service(maintenance indicator "S") and an assignment type for the 1:N remapping (maintenance indicator"C").
- Enter these assignments in the IMG activity Maintain Settings for SAP Ambulatory CareManagement.
You maintain the actual remapping in the IMG activity Remap Services. Make sure that you define thefirst service remapping of a 1:N remapping with the assignment type "-->". Define each of the furtherservice remappings of this 1:N remapping with the assignment type for 1:N remappings that you definedbeforehand in the IMG activity Maintain Settings for SAP Ambulatory Care Management.
______________________________________________________________SAP AG 33
SAP-System______________________________________________________________
See also
For information about the Customizing settings, see SAP Healthcare - Industry-Specific Componentsfor Hospitals -> SAP Ambulatory Care Management -> Billing -> Maintain Settings for SAPAmbulatory Care Management in the IS-H Implementation Guide.
37.6.5.3 Rule for Service Remapping (R18) (New)
Use
As of SAP ECC Industry Extension Healthcare 6.0, the service rule R18 Remap Service Codes isprovided in SAP Ambulatory Care Management.
You can use this service rule to trigger service remapping for the following events (callup points):
- Service Check Before Billing
- Service Check Before Test Billing
- Service Check Before Accrual
- Service Check Before Test Accrual
Note that the service rule R18 considers all of the case's services for the remapping. However, remappingfrom service entry only takes into account the services in the current view.
Effects on Customizing
To use this function, you must activate the business function SAP Ambulatory Care Management(ISH_AMBULATORY).
37.6.5.4 Service Rule Control (New)
Use
As of SAP ECC Industry Extension Healthcare 6.0, the following two new functions relating toservice rules are provided in SAP Ambulatory Care Management (SAP ACM):
- Billing service check by the rule moduleYou can stipulate whether or not the use of the billing service is permitted for the rule types. If theuse of the billing catalog is permitted, you can activate this function on institution-specific checkprocedure level.
- Authorization check for the services before transfer to the rule function modulesYou can set the Authorization Check indicator for institution-specific check procedures.
______________________________________________________________SAP AG 34
SAP-System______________________________________________________________
If you have set the indicator for the use of billing services for a rule function module, the system replacesthe services by the determined billing services and billing catalog before transferring them to the rulefunction module. The system does not transfer services without a billing service to the rule functionmodule. If the Authorization Checks indicator is set for services, the system only transfers the services,for which the user has display authorization, to the rule function module. The system does not transfer theother services and consequently does not execute rules for these services.
Effects on Customizing
To use this function, you must activate the business function SAP Ambulatory Care Management(ISH_AMBULATORY).
Rule types: In the IMG activity Define Rule Types and Maintain Check Procedure, set the indicatorthat permits the use of the billing catalog for the rule type.
Institution-specific check procedure (for rule type and event): In the IMG activity Define Rule Typesand Maintain Check Procedure, stipulate whether the billing catalog is to be used (if permitted for therule type) and whether the system is to perform authorization checks for the services before transferringthem to the rule function module.
37.6.5.5 Determination of Multiplication Factor (Enhanced)
Use
As of SAP ECC Industry Extension Healthcare 6.0, the determination of the multiplication factor forservices is enhanced in SAP Ambulatory Care Management.
When defining the multiplication factor rules in Customizing, you can now specify the additionalparameters Insurance Provider Type and Insurance Provider.
This is recommended for cases in which the multiplication factor is based on the insurance provider.
Effects on Customizing
To use this function, you must activate the business function SAP Ambulatory Care Management(ISH_AMBULATORY).
In the IMG activity Define Rules for Multiplication Factors, add entries for the parameters InsuranceProvider Type and Insurance Provider, if necessary.
______________________________________________________________SAP AG 35
SAP-System______________________________________________________________
37.6.5.6 Separate Company Code for Direct Patient Billing (New)
Use
As of SAP ECC Industry Extension Healthcare 6.0, you can make postings resulting from invoicecreation or cancellation in a separate company code from the institution in SAP Ambulatory CareManagement. This makes it possible to handle the accounting of direct patient bills separately, whilecase processing continues unaltered in the existing institution.
The system checks whether direct patient billing is active in Patient Accounting. If the system finds abilling organizational unit for a case, which authorizes direct patient billing, it checks the following:
- Can all billable services be posted in the same company code?
- Does the customer exist for the company code, or can it be created automatically?
- Is the customer valid and not blocked?
- Is the company code open for postings?
If any one of the checks yields a negative result, the system issues a relevant message and does not carryout billing.
Effects on Customizing
To use this function, you must activate the business function SAP Ambulatory Care Management(ISH_AMBULATORY).
In the IMG activity Maintain Company Codes for Direct Patient Billing (technical nameTN21BUKRS), specify the billing organizational units that accommodate direct patient billing. For eachof these organizational units, store a company code dependent on the institution and case type. You musthave set up the company codes that permit direct patient billing beforehand in Customizing.
For more information about this, see the documentation for the IMG activity Maintain Company Codesfor Direct Patient Billing.
37.7 IS-H-BD Basic Data
37.7.1 CH: Import Report for Internal Tariff Types (RNWCHTARTYP_DOM)(New)
Use
This release note is relevant for the country version Switzerland only. Documentation is not available in
______________________________________________________________SAP AG 36
SAP-System______________________________________________________________
English.
37.7.2 IS-H-BD-STR Hospital Structure
37.7.2.1 Multiple Assignment of Building Units in Visit Scheduling (New)
Use
As of SAP ECC Industry Extension Healthcare 6.0, you can assign a building unit to anorganizational unit (OU) in transaction NB35 as follows (from the SAP Easy Access screen, chooseHospital -> Basic Data Administration -> Hospital Structure -> Building Structure ->Organizational Unit Assignment):
- As a primary assignment, if the building unit is assigned to the organizational unit in accordancewith the hospital organizational structure. Your previous building unit-to-OU assignments areflagged as primary assignments in transaction NB35 with this release.
- As a secondary assignment, if the building unit already has a primary assignment to an OU and isalso assigned to a different organizational unit, since it is also used by this unit. You can also use thesecondary assignment independently of an existing primary assignment.
You can use this multiple assignment of a building unit in visit scheduling, if you allocate patientappointments for a treatment room that is used by different outpatient clinics/service facilities. For thispurpose, you can create the treatment room as a planning object for each of the OUs concerned(transaction code NR25) and store time slots for the respective OUs in the day program of the planningobject when defining time slots (transaction code NR22).
You can define the time slots for the treatment room in the day program as follows:
- For a timeframe and an OU by explicitly storing an OU for the timeframe.
- For a timeframe and for all assigned OUs by storing the OU "*" for the timeframe. In this way, youmake the time slot available to all OUs alternatively for the timeframe.
- For a timeframe and multiple OUs by making the time slot available alternatively for the timeframe.For this purpose, store identical timeframes for the various OUs.
The open time slot search (appointment search) takes the stored alternative time slots into account asfollows:
- If you specify an OU for which you want to find an available time slot, the system takes this OUinto account.
- If you do not specify an OU, but do specify a scheduling type, the system takes this into accountwhen determining the available time slot(s).
- If you specify neither an OU nor a scheduling type, the system takes into account the time slot(s) forthe OU of the primary assignment.
______________________________________________________________SAP AG 37
SAP-System______________________________________________________________
37.7.3 IS-H-BD-BUS Business Partners
37.7.3.1 CH: Company Number of Employer (New)
Use
This release note is relevant for the country version Switzerland only. Documentation is not available inEnglish.
37.7.4 IS-H-BD-SER Service Master Data
37.7.4.1 Statistics-, Master Data-, and Utility Reports (Deleted)
Use
With SAP ECC Industry Extension Healthcare 6.0, the following reports have deleted:
- Delete Service Catalogs of an Institution (RNDELLST)
- IS-H: Service Statistics (By Performing and Requesting OU) (RNLSTA01)
- IS-H: Service Statistics (By Requesting and Performing OU) (RNLSTA02)
- IS-H: Service Statistics (Requesting OUs by Service Code) (RNLSTA03)
- IS-H: Statistics for Extended Services (By Performing OU) (RNLSTA05)
- IS-H: Statistics for Extended Services (By Requesting OU) (RNLSTA06)
- IS-H: Flat Rate Per Case Statistics (RNLSTA07)
- IS-H: Procedures Surcharge Statistics (RNLSTA08)
- IS-H: BPflV 1995 V2 - Procedures Surcharges for Department (RNSV202)
- IS-H: BPflV 1995 V3 - Flat Rates per Case of Department (RNSV302)
- IS-H. Include V2/V3 Statistics (RNSVXI01)
- IS-H: Test Report: Delete Incorrect Services from Service Catalog (RNUDLS01)
- IS-H: Adjust Services for Inpatients on Key Date (RNUEBER0)
- IS-H: XPRA for ALPHA Conversion in NCLO (RNUHCO00)
- IS-HCO: Partially Transferred Services with Remaining Quantity 0 (RNUHCO03)
- IS-HCO: Reset Change Indicator after Transfer (RNUHCO05)
______________________________________________________________SAP AG 38
SAP-System______________________________________________________________
- IS-H: Determine HCO Indicator for All Services (RNUHCOKZ)
- IS-H: Reorganization of Service Catalog Columns (RNUKARE0)
- IS-H: Check Service Master for Overlapping Intervals (RNUKARE5)
- IS-H: Utility for Inconsistent NKSP Entries (RNUNKSP0)
37.7.5 IS-H-BD-CWS Clinical Work Station
37.7.5.1 Central BAdI for Execution of Customer-Specific Functions (New)
Use
You can execute customer-specific functions in the various views in the Clinical Work Station usingcorresponding Business Add-Ins (BAdI).
Up to now, a specific BAdI was provided for each view type.
As of SAP ECC Industry Extension Healthcare 6.0, you can centrally implement yourcustomer-specific functions for all view types in the Clinical Work Station using the BAdIISH_FUNCTION_CALL of the enhancement spot ES_ISH_CLINICAL_WORKSTATION.
It is recommended that you use the new BAdI for new functional enhancements for the Clinical WorkStation, and centrally implement your existing enhancements in this BAdI.
37.7.5.2 More Callpoints for Determining Variants (New)
Use
As of SAP ECC Industry Extension Healthcare 6.0, you can associate your own variants with thecallpoints in the Clinical Process Builder that previously only supported SAP variants. These callpointsinclude:
______________________________________________________________SAP AG 39
SAP-System______________________________________________________________
- Call patient master data (transaction codes NP01 - NP03), callpoint NP02
- Call inpatient admission (transaction codes NV01 - NV03), callpoint NV02
- Call inpatient quick admission (transaction codes NV04 - NV06), callpoint NV05
- Call inpatient emergency admission (transaction codes NV07 - NV09), callpoint NV08
- Call outpatient admission (transaction codes NV41 - NV43), callpoint NV42
- Call outpatient quick admission (transaction codes NV44 - NV46), callpoint NV45
- Call outpatient emergency admission (transaction codes NV47 - NV49), callpoint NV48
- Call admission data (transaction codes NP11 - NP13), callpoint NP12
- Call visit data (transaction codes NP40 - NP43), callpoint NP42
- Call surgery (transaction codes NP36 - NP39), callpoint NP38
- Call transfer (transaction codes NV11 - NV13), callpoint NV12
- Call absence (transaction codes NP91 - NP93), callpoint NP92
- Call discharge (transaction codes NP97 - NP99), callpoint NP98
- Call material consumption (transaction codes NMMC1 and NMMC2), callpoint NMMC
- Call readmission function (transaction codes NAPX1 and NAPX2), callpoints NAPX
Note that you can only replace patient-related SAP variants (for example, SAP Patient Master Datawith your own patient-related variants and, likewise, case-related SAP variants (for example, SAPReadmission) with your own case-related variants.
Variant Determination for Clinical Process Builder in the Clinical Work Station
In prior releases, when you called the Clinical Process Builder in the Clinical Work Station, you wereable to use the callpoints NWP001, NWP002, NWP003 and so on to determine variants. As of SAPECC Industry Extension Healthcare 6.0, you can also use the above listed new callpoints of theClinical Process Builder in the Clinical Work Station as an alternative to these callpoints. The systemdetermines the variant, for example, for the occupancy view in the Clinical Work Station using the newcallpoints if you have not stored a variant determination entry for the callpoint NWP001 for the user ofthe Clinical Work Station.
______________________________________________________________SAP AG 40
SAP-System______________________________________________________________
37.8 IS-H-PM Patient Management
37.8.1 More Callpoints for Determining Variants (New)
Use
As of SAP ECC Industry Extension Healthcare 6.0, you can associate your own variants with thecallpoints in the Clinical Process Builder that previously only supported SAP variants. These callpointsinclude:
- Call patient master data (transaction codes NP01 - NP03), callpoint NP02
- Call inpatient admission (transaction codes NV01 - NV03), callpoint NV02
- Call inpatient quick admission (transaction codes NV04 - NV06), callpoint NV05
- Call inpatient emergency admission (transaction codes NV07 - NV09), callpoint NV08
- Call outpatient admission (transaction codes NV41 - NV43), callpoint NV42
- Call outpatient quick admission (transaction codes NV44 - NV46), callpoint NV45
- Call outpatient emergency admission (transaction codes NV47 - NV49), callpoint NV48
- Call admission data (transaction codes NP11 - NP13), callpoint NP12
- Call visit data (transaction codes NP40 - NP43), callpoint NP42
- Call surgery (transaction codes NP36 - NP39), callpoint NP38
- Call transfer (transaction codes NV11 - NV13), callpoint NV12
- Call absence (transaction codes NP91 - NP93), callpoint NP92
- Call discharge (transaction codes NP97 - NP99), callpoint NP98
- Call material consumption (transaction codes NMMC1 and NMMC2), callpoint NMMC
- Call readmission function (transaction codes NAPX1 and NAPX2), callpoints NAPX
Note that you can only replace patient-related SAP variants (for example, SAP Patient Master Datawith your own patient-related variants and, likewise, case-related SAP variants (for example, SAPReadmission) with your own case-related variants.
Variant Determination for Clinical Process Builder in the Clinical Work Station
In prior releases, when you called the Clinical Process Builder in the Clinical Work Station, you wereable to use the callpoints NWP001, NWP002, NWP003 and so on to determine variants. As of SAPECC Industry Extension Healthcare 6.0, you can also use the above listed new callpoints of theClinical Process Builder in the Clinical Work Station as an alternative to these callpoints. The systemdetermines the variant, for example, for the occupancy view in the Clinical Work Station using the newcallpoints if you have not stored a variant determination entry for the callpoint NWP001 for the user ofthe Clinical Work Station.
______________________________________________________________SAP AG 41
SAP-System______________________________________________________________
37.8.2 Hide Standard Variant in Clinical Process Builder (New)
Use
Up to now, the SAP standard variant was assigned to all users of the Clinical Process Builder withoutthe possibility of suppressing it from the screen. As of SAP ECC Industry Extension Healthcare 6.0,you can also remove the SAP standard variant from the list of assigned variants (input field Variant onthe initial screen of the Clinical Process Builder) by choosing Settings -> Variant -> Hide. You candisplay it again by choosing Settings -> Variant -> Show.
Effects on System Administration
You can make these settings for multiple users by means of variant management (Settings -> Variant ->Management). Note the following in this respect:
- When a role is assigned, the system determines the users currently assigned to this role, and assignsthem individually (not the role as a whole) to the SAP standard variant.
- When the user * is assigned, the system determines all of the users who have ever worked with theClinical Process Builder up to this point in time, and assigns them individually to the SAPstandard variant.
Consequently, you may have to renew the settings for users who are subsequently assigned to a role, orwho subsequently start working with the Clinical Process Builder.
37.8.3 Function Bars in Clinical Process Builder (New)
Use
Up to now, the toolbars in the data screen of the Clinical Process Builder were predefined by SAP. As ofSAP ECC Industry Extension Healthcare 6.0, you can create a function bar and assign it to your ownvariants by choosing Settings -> Variant -> Create or Settings -> Variant -> Change. The systemthen displays this function bar in the place of the previous application toolbar in the data screen of theClinical Process Builder. As part of this new development, the application toolbar of the SAP standardvariant has also been implemented as the SAP standard function bar. Some of the functions from theGoto menu, the entire Extras menu, and the entire Environment menu have been incorporated into thefunction bar.
______________________________________________________________SAP AG 42
SAP-System______________________________________________________________
You create function bars by executing the Create Function Bar function in the Create Variant orChange Variant screen. Here you can either incorporate the SAP predefined standard functions intoyour function bar, or create functions of your own. Note that when you use your own functions, you haveto map the processing using the Business Add-In (BAdI) ISH_NV2000_PAI_COMPL.
You can suppress functions from the screen (also from the SAP standard function bar) using the BAdIISH_NV2000_TOOLBAR.
37.8.4 Patient Status Extract (Deleted)
Use
As of SAP ECC Industry Extension Healthcare 6.0, the report IS-H: Patient Status Extract(technical name RNLAUS00) no longer exists.
It has been replaced by the report IS-H: Patient Status Extract (technical name RNLAUS01), whichdisplays the archived case data also.
37.8.5 AT: Integration of E-Card into SAP Patient Management (IS-H) (New)
Use
This release note is relevant for the country version Austria only. Documentation is not available inEnglish.
37.8.6 IS-H-PM-PAT Patient Master Data
37.8.6.1 New Field "Employed Since" for Patient's Employer (Changed)
______________________________________________________________SAP AG 43
SAP-System______________________________________________________________
Use
The new field Employed Since specifies as of when the patient is employed by his or her employer.
As of SAP ECC Industry Extension Healthcare 6.0, this field is provided in the followingapplications:
- Employer subscreen of the Clinical Process Builder
- BAPIs (Business Application Programming Interfaces):
- BAPI_PATIENT_CREATE
- BAPI_PATIENT_CHANGE
- BAPI_PATIENT_GETDETAIL
- BAdIs (Business Add-Ins):
- ISH_NV2000_PBO
- ISH_NV2000_PAI
- ISH_NV2000_PAI_COMPL
Effects on Existing Data
Existing data is not changed.
37.8.6.2 AT: Patient Master Data - Additional Title Field (New)
Use
This release note is relevant for the country version Austria only. Documentation is not available inEnglish.
37.8.7 IS-H-PM-INP Inpatient Case
37.8.7.1 Maintain Absence in Clinical Process Builder (New)
Use
As of SAP ECC Industry Extension Healthcare 6.0, there is a new dedicated subscreen formaintaining absence data, which you can incorporate into a variant of the Clinical Process Builder. Thissubscreen is incorporated into the new standard variant SAP Absence. This new standard variant in turn
______________________________________________________________SAP AG 44
SAP-System______________________________________________________________
replaces the previous maintenance of the absence data using transactions NP91, NP92 and NP93. Whenyou launch any of these transactions, the system automatically starts the Clinical Process Builder with thevariant SAP Absence.
See also
For further information about this topic, also see the following Release Notes:
- Old Transactions Switched Over to Clinical Process Builder (Changed)
- More Callpoints for Determining Variants (New)
37.8.7.2 Old Transactions Switched Over to Clinical Process Builder (Changed)
Use
As described in the Release Note Notification of End of Maintenance of Old Inpat./Outpat. Admission forSAP Patient Management Release 4.71, we are ending maintenance for several old transactions as ofSAP ECC Industry Extension Healthcare 6.0.
Maintenance of the following old transactions will also end:
- Discharge (NP97, NP98 and NP99)
- Transfer (NV11, NV12 and NV13)
- Absence (NP91, NP92 and NP93)
- Surgery (NP36, NP37, NP38 and NP39)
- Patient master data management (NP01, NP02 and NP03)
The old transactions are not deactivated, but rerouted to the Clinical Process Builder. It is not longerpossible to control this rerouting mechanism by means of user parameter NV2000.
Effects on System Administration
If you have based your authorization concept thus far on transactions alone, this will no longer functionwhen the Clinical Process Builder is used.
Example
If you did not previously work with the Clinical Process Builder and used the transaction authorizationsS_TCODE and N_EINR_TCO to prevent a user from processing discharges by excluding transactionsNP97, NP98 and NP99, this resulted in an inadequate authorization check, for example, whenoutputting discharges in list form. Since you can also process discharges in the Clinical Process Builder
______________________________________________________________SAP AG 45
SAP-System______________________________________________________________
without the transactions NP97, NP98 and NP99 by calling the Clinical Process Builder directly andusing, for example, the SAP Discharge variant, the authorization check does not detect a missingauthorization.
As concerns the authorization concept, we thus recommend that you restrict not only the transactionauthorizations, but also the object authorizations (N_NBEW_AKT in the above example).
37.8.7.3 New Processing Modes in Variant Determination (New)
Use
As of SAP ECC Industry Extension Healthcare 6.0, in addition to the existing Processing Modefield that corresponds to the function you choose on the initial screen of the Clinical Process Builder(create, change, display), it is possible to determine a variant for the case and the movement in theClinical Process Builder.
This enables you, for example, to stipulate that when creating an outpatient visit for a new outpatient casefrom the case overview, the system is to use a different variant than when creating an outpatient visit foran existing case.
37.8.8 IS-H-PM-OUT Outpatient Case
37.8.8.1 Old Transactions Switched Over to Clinical Process Builder (Changed)
Use
As described in the Release Note Notification of End of Maintenance of Old Inpat./Outpat. Admission forSAP Patient Management Release 4.71, we are ending maintenance for several old transactions as ofSAP ECC Industry Extension Healthcare 6.0.
Maintenance of the following old transactions will also end:
- Discharge (NP97, NP98 and NP99)
- Transfer (NV11, NV12 and NV13)
- Absence (NP91, NP92 and NP93)
______________________________________________________________SAP AG 46
SAP-System______________________________________________________________
- Surgery (NP36, NP37, NP38 and NP39)
- Patient master data management (NP01, NP02 and NP03)
The old transactions are not deactivated, but rerouted to the Clinical Process Builder. It is not longerpossible to control this rerouting mechanism by means of user parameter NV2000.
Effects on System Administration
If you have based your authorization concept thus far on transactions alone, this will no longer functionwhen the Clinical Process Builder is used.
Example
If you did not previously work with the Clinical Process Builder and used the transaction authorizationsS_TCODE and N_EINR_TCO to prevent a user from processing discharges by excluding transactionsNP97, NP98 and NP99, this resulted in an inadequate authorization check, for example, whenoutputting discharges in list form. Since you can also process discharges in the Clinical Process Builderwithout the transactions NP97, NP98 and NP99 by calling the Clinical Process Builder directly andusing, for example, the SAP Discharge variant, the authorization check does not detect a missingauthorization.
As concerns the authorization concept, we thus recommend that you restrict not only the transactionauthorizations, but also the object authorizations (N_NBEW_AKT in the above example).
37.8.8.2 New Processing Modes in Variant Determination (New)
Use
As of SAP ECC Industry Extension Healthcare 6.0, in addition to the existing Processing Modefield that corresponds to the function you choose on the initial screen of the Clinical Process Builder(create, change, display), it is possible to determine a variant for the case and the movement in theClinical Process Builder.
This enables you, for example, to stipulate that when creating an outpatient visit for a new outpatient casefrom the case overview, the system is to use a different variant than when creating an outpatient visit foran existing case.
______________________________________________________________SAP AG 47
SAP-System______________________________________________________________
37.8.9 IS-H-PM-GEN General Case Processing
37.8.9.1 Case Revision and Create with Template (Enhanced)
Use
As of SAP ECC Industry Extension Healthcare 6.0, the following new and changed features areprovided for case revision and create with template:
Reassign Subobjects
You can now carry out case revision for individual subobjects also. This enables you to reassigndiagnoses, procedures, services, and materials from one case or movement to another case or movement.The aim is to reassign larger quantities of subobjects, which you inadvertently assigned to a case, to avoidduplicate input effort.
Procedure:
1. Select a case or a visit in the case list.
2. Choose Case Overview -> Case Revision -> Reassign Subobjects.A dialog box appears containing all of the objects of the selected case or of the selected movementsthat you can select to be reassigned.
3. Select the objects that you want to reassign.
4. The system also displays the possible target cases and movements for you to select in the dialogbox. Select a target movement, and start the reassignment process.
Create a New Inpatient/Day Patient Case with Template
You can now execute create with template for an entire inpatient/day patient case or for an admissionmovement.
If you want to create an entire case from a template, the system creates the admission, visits, anddischarge with all the relevant subobjects also.
The case has the same structure as the source case.
The aim is to create similar cases (for example, day patient cases for dialysis) with reduced input effort.
Procedure:
Select a case in the case list, and choose Create Admission.
If you only want to create the admission movement, select an admission, and choose Create Admission.
You can check the selection of subobjects in the Create with Template dialog box.
______________________________________________________________SAP AG 48
SAP-System______________________________________________________________
Dialog Box for Reassign and Create with Template
You can now enter a comment in the case revision dialog box. You are no longer able to change thiscomment after the reassignment process has completed. You can display the comment using theevaluation report (see below).
The following convenience functions have been added to the dialog box for case revision and for createwith template:
- Select All
- Deselect All
- Expand All
- Collapse All
As of this release, when you reassign a procedure, you can have the system transfer the procedure longtext also.
Evaluation Report (New)
The system logs all reassignment processes in a table. The new evaluation report RNLCASREV enablesyou to evaluate and display these reassignment processes.
You can thus identify the source- and target case and other information on selected objects at a later pointin time.
Procedure
If you want to run the evaluation report for a specific case, select this case in the case list, and chooseCase List -> Case Revision -> History.
If you want to run the report with other selection criteria, from the SAP Easy Access screen, chooseHospital -> Statistics/Information -> Report Tree -> Patient Management -> General CaseProcessing -> IS-H: Case Revision Evaluation Report.
Enhancement of Business Add-In (BAdIs) ISH_SHIFT_CUS for Case Revision
- CHANGE_DESTINATION_FIELDSThis method enables you to preset individual fields when creating a movement with a template.
- SET_TREE_PARAMETERThis method enables you to control the selection behavior in the source tree. You can use thismethod, for example, to implement that the system does not transfer services when create withtemplate is used.
- SET_EXPANDBy implementing this method you can control the expansion behavior of the source tree.
Migration of the BAdI:
With this release, the BAdI ISH_SHIFT_CUS has been migrated to the new technology of the
______________________________________________________________SAP AG 49
SAP-System______________________________________________________________
Enhancement Framework. The implementations you have created are retained.
Effects on Existing Data
Existing data is not changed. Although the table NSHIFT has been enhanced in this release, a migrationis not required.
Effects on System Administration
Migrate the implementation of your BAdI ISH_SHIFT_CUS.
37.8.9.2 AT: New Features in Clinical Process Builder (New)
Use
This release note is relevant for the country version Austria only. Documentation is not available inEnglish.
37.8.10 IS-H-PM-PLN Planning
37.8.10.1 Report for Migration of Movement Data in Preregistration (New)
Use
As of SAP ECC Industry Extension Healthcare 6.0, the report N1_MIGPRG is provided formigrating the movement data of the preregistration.
Note
The report was first shipped with SAP Patient Management 4.72, Add-On Support Package 2.
When you run the report, note the following:
- In the course of the upgrade, the system automatically migrates the existing preregistration types toorder types. Do not modify these order types before you have migrated the movement data.
- You can run the report N1_MIGPRG at your convenience without having to interrupt normaloperation.
- You can run the report any number of times. It takes migrated preregistrations into account.
Effects on Data Transfer
The report migrates non-canceled preregistrations into clinical orders. For each existing preregistration,the system creates a clinical order with one order item (admission or treatment), or with two order items
______________________________________________________________SAP AG 50
SAP-System______________________________________________________________
(admission and treatment).
The original data remains unchanged, except for
- Appointments
- Services
- Movements
The report reassigns the original data for these to the new order, or the respective order item.
See also
For further information, see the report documentation.
37.8.10.2 Appointment Confirmation Dialog (Changed)
Use
When creating a visit or preregistration, you can call the visit scheduling function to plan a visitappointment. The system displays a daily schedule with the time slots for the planning object (attendingphysician or treatment room), and you can select an open time slot (appointment) in the daily schedule.When you have selected an appointment, the system displays the appointment data in a dialog box foryou to confirm.
For SAP ECC Industry Extension Healthcare 6.0, this appointment confirmation has been redesignedand now enables you to edit all the appointment data.
37.8.10.3 Authorization Check when Maintaining Planning Objects/Time Slots(New)
Use
As of SAP ECC Industry Extension Healthcare 6.0, for the maintenance of the planning objects andtime slot- or admission capacity data (transaction codes NR20-NR25) in the appointment managementarea (visit scheduling and inpatient admission planning), you can check relevant authorizations by meansof the authorization object N_AMB_DSP and the new activities T0 (Display Time Slots) and T1(Maintain Time Slots).
______________________________________________________________SAP AG 51
SAP-System______________________________________________________________
Effects on Existing Data
Note that all users for whom you have up to now restricted the activities with regard to the authorizationobject N_AMB_DSP, are not authorized to maintain planning objects and time slots after the new releasehas been imported. Add the new activities T0 (Display Time Slots) and T1 (Maintain Time Slots) to theauthorizations for the relevant users.
37.8.10.4 Time Slot Changes in Visit Scheduling (New)
Use
As of SAP ECC Industry Extension Healthcare 6.0, when changes are made to time slots, the newtime slot data is immediately available to all active visit scheduling functions.
To ensure rapid response times for visit scheduling, in previous releases, underlying time slot data wasonly read from the database when visit scheduling was called anew. If your system administrator changedthe time slots while users were using visit scheduling functions, these changes were not available to themuntil the next time they called visit scheduling. The system now applies time slot changes immediately inthe visit scheduling functions.
37.8.10.5 Multiple Assignment of Building Units in Visit Scheduling (New)
Use
As of SAP ECC Industry Extension Healthcare 6.0, you can assign a building unit to anorganizational unit (OU) in transaction NB35 as follows (from the SAP Easy Access screen, chooseHospital -> Basic Data Administration -> Hospital Structure -> Building Structure ->Organizational Unit Assignment):
- As a primary assignment, if the building unit is assigned to the organizational unit in accordancewith the hospital organizational structure. Your previous building unit-to-OU assignments areflagged as primary assignments in transaction NB35 with this release.
______________________________________________________________SAP AG 52
SAP-System______________________________________________________________
- As a secondary assignment, if the building unit already has a primary assignment to an OU and isalso assigned to a different organizational unit, since it is also used by this unit. You can also use thesecondary assignment independently of an existing primary assignment.
You can use this multiple assignment of a building unit in visit scheduling, if you allocate patientappointments for a treatment room that is used by different outpatient clinics/service facilities. For thispurpose, you can create the treatment room as a planning object for each of the OUs concerned(transaction code NR25) and store time slots for the respective OUs in the day program of the planningobject when defining time slots (transaction code NR22).
You can define the time slots for the treatment room in the day program as follows:
- For a timeframe and an OU by explicitly storing an OU for the timeframe.
- For a timeframe and for all assigned OUs by storing the OU "*" for the timeframe. In this way, youmake the time slot available to all OUs alternatively for the timeframe.
- For a timeframe and multiple OUs by making the time slot available alternatively for the timeframe.For this purpose, store identical timeframes for the various OUs.
The open time slot search (appointment search) takes the stored alternative time slots into account asfollows:
- If you specify an OU for which you want to find an available time slot, the system takes this OUinto account.
- If you do not specify an OU, but do specify a scheduling type, the system takes this into accountwhen determining the available time slot(s).
- If you specify neither an OU nor a scheduling type, the system takes into account the time slot(s) forthe OU of the primary assignment.
37.8.10.6 Admission without Appointment in Preregistration (Enhanced)
Use
As of SAP Patient Management 4.72 Add-On Support Package 5 or SAP ECC IndustryExtension Healthcare 6.0, the functions Create Admission and Create Visit are provided in apreregistration item in the preregistration, even if you have still to enter an appointment.
______________________________________________________________SAP AG 53
SAP-System______________________________________________________________
37.9 IS-H-MD Medical/Nursing Documentation
37.9.1 DE: Readmission Processing (New)
Use
This release note is relevant for the country version Germany only. Documentation is not available inEnglish.
37.9.2 IS-H-MD-DOC Basic Medical/Nursing Documentation
37.9.2.1 "DRG Diagnoses" in Clinical Process Builder (New)
Use
As of SAP ECC Industry Extension Healthcare 6.0, a subscreen for displaying and processing DRGdiagnoses is provided in the Clinical Process Builder.
The subscreen displays all the diagnoses for a case with a special filter for "DRG", independently of thedepartment stay to which the diagnoses are linked. The diagnosis display corresponds to the diagnosisdisplay on the Diagnoses tab page in the DRG work station (transaction code NPDRG2).
Effects on System Administration
The following subscreens are provided for diagnosis processing in the Clinical Process Builder:
- Referral Diagnoses
- (Movement-Related) Diagnoses
- DRG Diagnoses
Note that a you can use a maximum of one of these subscreens in a variant for the Clinical ProcessBuilder.
______________________________________________________________SAP AG 54
SAP-System______________________________________________________________
37.9.2.2 "DRG System" Added to DRG Customizing (Enhanced)
Use
As of SAP ECC Industry Extension Healthcare 6.0, the DRG System field is provided in the IMGactivity Set Parameters for DRG Documentation. The DRG system describes basic properties andrules of a DRG method that are often country-specific. At present, you can make entries for G_DRG(German Related Diagnostic Group) and SG_DRG (Singapore DRG).
Effects on Customizing
If you did not specify a DRG method in the DRG System field, the system can group correctly by meansof the configured country version. In such cases, the system issues the warning message Cannotdetermine DRG system (N6 737).
37.9.2.3 New Business Transactions for Basic Med. Documentation Status(New)
Use
As of SAP ECC Industry Extension Healthcare 6.0, the following new business transactions areprovided for the status of basic medical documentation:
- Change selected case data (NFAL)
- Change selected movement data (NBEW)
- Bill selected services (NABL)
Effects on Existing Data
The checks on the changeability of case data and movement data using the business transactions ChangeSelected Case Data and Change Selected Movement Data are provided in the Clinical ProcessBuilder, in diagnosis entry (transaction code NP61), and in the DRG work station (transaction codeNPDRG2).
You can check the changeability of movement data for all movement categories, or restrict it explicitly tospecified movement categories, for example, admission. The system also takes into account the businesstransaction check when movements are created.
The business transaction Bill Selected Services enables you to permit specific services, such as personalitems, to be billed for straight away and to initially exclude other services, such as a DRG service, fromthe billing process. The business transaction Bill Selected Services is a refinement of the business
______________________________________________________________SAP AG 55
SAP-System______________________________________________________________
transaction Bill Case.
Effects on Customizing
You can assign the new business transactions with the following values to the individual statuses of astatus profile in the IMG activity Define Status Profile:
- Allowed
- Allowed with warning
- Forbidden
For an overview of the status management configuration options, see Basic Medical DocumentationStatus Management in the IS-H Implementation Guide.
Note, in particular, the following new IMG activities:
- Display Possible Fields for Detailed Definition of Bus. Transactions (SAP)
- Maintain Fields for Detailed Definition of Business Transactions
- BAdI: Refine Detailed Definition of Business Transactions
- BAdI: Business Transaction Check "Bill Selected Services"
37.9.2.4 Case Status and Department Status in Clinical Work Station (New)
Use
As of SAP ECC Industry Extension Healthcare 6.0, the new function Set Medical DocumentationStatus is provided in the Clinical Work Station.
This function enables you to set a new case status and department status (basic medical documentationstatus) for all the selected cases. If it is not possible to set the new status, the system issues errormessages accordingly.
Effects on System Administration
The option of also opening or closing department statuses has been added to the Set MedicalDocumentation Status function in the Coding Analyses view type.
The Set Medical Documentation Status function is new in the view types Movements, Arrivals, andDepartures.
______________________________________________________________SAP AG 56
SAP-System______________________________________________________________
37.9.2.5 Report for Setting the Status for Multiple Cases (New)
Use
As of SAP ECC Industry Extension Healthcare 6.0, the report Set Basic Medical DocumentStatus for Multiple Cases (technical name RNMDSTAT) provides a new function for the statusmanagement of basic medical documentation.
You can select the cases for mass processing by specifying either case selection(s), or selection criteria. Ifyou run the report in test mode, the system simulates the specified status transition. This enables you, forexample, to create an overview of cases with a specific status, and to check whether the status transitioncould be made without errors, or not.
The results log can be output in detailed or summarized form. In the detailed log, the system includes thestatus prior to the transition.
37.9.2.6 "Basic Medical Documentation Status" Subscreen in Clinical ProcessBuilder (New)
Use
As of SAP ECC Industry Extension Healthcare 6.0, a subscreen for displaying and changing thestatus of the basic medical documentation is provided in the Clinical Process Builder.
You can maintain the case status and the department statuses in this subscreen.
37.9.2.7 DE: DRG Key Figures: Limit Dates (mLOS-, aLOS-, MLOS-Date) (New)
Use
This release note is relevant for the country version Germany only. Documentation is not available in
______________________________________________________________SAP AG 57
SAP-System______________________________________________________________
English.
37.9.2.8 BAPIs for Procedure Processing (Enhanced)
Use
As of SAP ECC Industry Extension Healthcare 6.0, the BAPIs for procedure processing have beenfunctionally enhanced.
If you process procedures using the following BAPIs, the system totals the customer-specific mechanicalventilation hours, and stores the result in the Mechanical Ventilation Hours field for the case:
- BAPI_CASEPROCEDURE_CREATEMULT
- BAPI_CASEPROCEDURE_CHANGEMULT
- BAPI_CASEPROCEDURE_CANCELMULT
If processing involves a case that you have already grouped, the system flags this DRG result as"obsolete" when procedures have been changed.
37.9.2.9 "DRG Data" Subscreen in Clinical Process Builder (New)
Use
As of SAP ECC Industry Extension Healthcare 6.0, an SAP tab page (DRG Data) and an SAPsubscreen (DRG Data) are provided for the DRG data in the Clinical Process Builder.
The SAP subscreen DRG Data contains the same functions as the tab page DRG Data in the DRG workstation (transaction code NDRG2), for example, group, execute rules, cancel.
Example
You can create a customer-specific variant in the Clinical Process Builder that contains, for example,the subscreen for the medical status, the DRG data, as well as the admission data and discharge data.
______________________________________________________________SAP AG 58
SAP-System______________________________________________________________
37.9.2.10 DE: DRG Work Station - Goto Readmission Transaction (New)
Use
This release note is relevant for the country version Germany only. Documentation is not available inEnglish.
37.9.2.11 OPS Localization (New)
Use
As of SAP Patient Management 4.72 Add-On Support Package 7 and SAP ECC IndustryExtension Healthcare 6.0 (IS-H 600), an indicator is provided for stipulating that the localization mustbe specified for a procedure.
The official OPS version 2005 contains this indicator for procedures that are performed on pair organs(for example, eyes, ears, kidneys).
For this reason, the OPS Localization Oblig. field (technical name NTPK-OPLOC) has been added tothe service master. The new field is located on the Other tab page in the dialog transaction formaintaining the service master data.
A field is provided for specifying the localization when procedures are entered either in dialog or in batchinput mode. If you use Surgery Documentation (i.s.h.med), the field Localization is also provided hereand is checked by the system when procedures are entered.
If the OPS Localization Oblig. indicator is set for procedures in the service master, the system issues anerror messages when such procedures are entered without the localization being specified. This appliesfor procedures entered in dialog- and batch input mode, or when procedures are transferred from anexternal system.
You can specify a localization whenever you enter diagnoses, procedures, or services in the i.s.h.medenvironment.
Effects on Existing Data
When importing the surgical procedures catalog, make sure that the new field named above is filled forpair procedures in the service master.
For the country version Germany, SAP SI provides a formatting program for importing OPS, version2005, subject to a charge. For further information, contact SAP SI AG directly:
SAP Systems Integration AGSekretariat HealthcareSt. Petersburger Strasse 901069 DresdenTel. 0351/4811-2501
______________________________________________________________SAP AG 59
SAP-System______________________________________________________________
Effects on Data Transfer
If you transfer procedure data from an external system into IS-H by batch input or BAPI, the externalsystem must also transfer the localization for the relevant procedures. Otherwise, IS-H cannot upload thedata.
Effects on Customizing
You can define valid customer-specific localizations in the IMG activity Maintain Medical Localization.Note that each customer-specific localization must be assigned to an official localization.
See also
The system checks the procedure localization in accordance with the legal requirements made of thegrouper interface. For further information about this, see the SAP Note 794995 IS-H: LocalizationAdded to G-DRG Grouper Interface.
37.9.2.12 Case-Related Procedure Entry (New)
Use
As of SAP ECC Industry Extension Healthcare 6.0, an SAP standard variant is provided forcase-related procedure entry (transaction codes NP47 and NP48) in the Clinical Process Builder.
If you use the Clinical Process Builder, you access the SAP standard variant SAP Case-RelatedProcedures for the Clinical Process Builder when you call case-related procedure entry.
The new case-related procedure entry in the Clinical Process Builder differs from the existingtransactions for the case-related entry of procedures in the following aspects:
- If in the case list you select a case or a movement that is not classified as a surgery, the systemdisplays all of the procedures that exist for the case.In this display, you can assign case-related procedures to an existing surgery movement with asimple mouse-click next to the SP code. You can display the movement data for surgery-relatedprocedures by means of the pushbutton. You can re-assign a surgery-related procedure to the case.
- If you select a surgery movement in the case list, the system only displays the procedures for thissurgery movement. If you enter more procedures, the system assigns them to the selected surgerymovement.This enables you to explicitly enter procedures for a surgery movement, without having to switch tosurgery data maintenance.
- You can access the following additional functions by choosing the More Functions button:
- Copy Row (copy a selected procedure row)
- Procedure -> Surgery (assign a case-related procedure to a surgery)
- Procedure -> Case (assign surgery-related procedure to the case)
- Customer Sort Sequence: If you implement the BAdI ISH_PROCEDURE_SORT, you candetermine your own sort sequence for the data. When you execute this function, the system
______________________________________________________________SAP AG 60
SAP-System______________________________________________________________
sorts the procedures according to the rules you defined.
- Record Information
- Change Documents
37.9.2.13 Maintain DRG Data (Changed)
Use
Group/Grouping Result
As of SAP Patient Management 4.72 Add-On Support Package 7 and SAP ECC IndustryExtension Healthcare 6.0, the system no longer creates a new data record during each grouping run.
Up to now, the existing DRG result was canceled or deleted during each grouping run if it was notalready saved in the database. The new DRG result was created. This was the case, regardless of whetherthe current DRG result differed from the previous DRG result.
The system now only creates a new data record if the following fields have contents that differ:
- DRG Code
- DRG Catalog
- Major Diagnostic Category (MDC)
- MDC Catalog
- Severity of Illness
- Risk of Mortality
- Cost Weight for DRGs
If the content of the above fields does not differ, the system changes the existing grouping result ratherthan canceling it. In the process, the system transfers the following fields into the existing DRG result:
- Comment on DRG (if entered)
- Information relating to the operation of the DRG system (if entered)
- Date when the DRG was determined
- Time when the DRG was determined
- Date when DRG was changed
- Time when DRG was changed
______________________________________________________________SAP AG 61
SAP-System______________________________________________________________
- Name of user who made the change
In the maintenance transaction for DRG data, the system always displays the user who last carried outgrouping, and no longer the user who originally created the data record.
If a DRG does not yet exist for a case, the system displays a yellow traffic light in the DRG WorkStation.
Complete Readmission Case
As of SAP ECC Industry Extension Healthcare 6.0, you can go directly to the maintenancetransaction for readmissions from DRG data maintenance (transaction PPDRG2), if the case belongs to areadmission sequence.
Case Is Final Billed or Provisionally Billed
As of SAP ECC Industry Extension Healthcare 6.0, you can no longer execute the Group functionfor cases that have the billing status "final billed" or "provisionally billed".
37.9.2.14 DE: Procedure Entry - Support for Enhanced OPS 301 (New)
Use
This release note is relevant for the country version Germany only. Documentation is not available inEnglish.
37.9.2.15 New Features/Changes in Procedure Entry (Changed)
Use
As of SAP ECC Industry Extension Healthcare 6.0, the following changed or enhanced functions areprovided for procedure entry:
- Business Add-Ins (BAdI): ISH_PROCEDURE_PROPOS and ISH_PROCEDURE_CHECKThe following fields are now provided for you in these BAdIs:
- Number of additional surgeries
- Localization of a procedure
- Identification from external system
______________________________________________________________SAP AG 62
SAP-System______________________________________________________________
- Procedure quantity
- Unit of measure for procedureUp to now, it was possible to check, but not to set nor change the fields in the above BAdIs. Otherfields have now been added. In future, you are able to assign values to the fields mentioned above.This is useful, for example, for procedures whose texts already contain a localization (left, right).
- Automatic Adjustment of Surgical Procedures CatalogIf you change the patient's case type, the admission start date, the surgery movement start date, orthe procedure start date, a different surgical procedures catalog may apply.With this release, the system automatically checks, and, if necessary, adjusts the surgical procedurescatalog. If the existing procedures are not found in the determined procedures catalog, the systemrejects the changes (for example, change of case type, change of admission date). You cannot makethe changes until you have canceled the existing procedures.If the procedures exists in the determined procedures catalog, the system makes the changes.If you want to prevent the procedures catalog from being adjusted automatically, you can modifythe message type of the message NICP 061 accordingly in message control.You can enter the message with the following values in your client:
Field Value
Institution Your current institution
Function NICP
Application Area NICP
Message Number 061
Default Type I
Message Type Customizable: W, S or E
Suppress If you select this option
the message does not appear.
Setting the message type to "E" prevents your system from automatically adjusting the surgicalprocedures catalog.
______________________________________________________________SAP AG 63
SAP-System______________________________________________________________
37.9.2.16 DE: Quantity and Unit of Measure Added (New)
Use
This release note is relevant for the country version Germany only. Documentation is not available inEnglish.
37.9.2.17 DE: Indicators "Regrouping Is Advised" or "DRG Is Obsolete"(Changed)
Use
This release note is relevant for the country version Germany only. Documentation is not available inEnglish.
37.9.2.18 AT: Diagnoses - LKF: Asterisk/Dagger Plausibility Check (Enhanced)
Use
This release note is relevant for the country version Austria only. Documentation is not available inEnglish.
37.9.3 IS-H-MD-MRM Medical Record Management
37.9.3.1 Restriction of Access to Borrowing History (New)
Use
As of SAP ECC Industry Extension Healthcare 6.0, you can restrict changing the borrowing historyin Medical Record Management by means of the authorization object N_BORR_HIS with the fieldsN_EINRI and ACTVT.
The only possible value for the field ACTVT is "02" for "Change the Borrowing History". If a user doesnot have the relevant authorization object, the "Change" and "Delete" pushbuttons are deactivated in theborrowing history.
Effects on System Administration
The profile N_ISH_ALL contains the new authorization object by default. Make sure that only authorizedusers have the new authorization object with the activity 02.
______________________________________________________________SAP AG 64
SAP-System______________________________________________________________
37.10 IS-H-PA Patient Accounting
37.10.1 General Ledger in Financial Accounting (New)
Use
As of SAP ECC 6.0, the new general ledger is provided in the Financial Accounting component (FI).You can implement the new general ledger in SAP Patient Management.
We recommend new customers to implement the new general ledger.Note that in production operation, you have to carry out a migration.
For further information about the new general ledger, see the Release Notes for Financial Accounting andSAP Notes.
37.10.2 CH: Service Rule C18 - Time-Stamp Remapping (Changed)
Use
This release note is relevant for the country version Switzerland only. Documentation is not available inEnglish.
37.10.3 CH: Charge Factor Value Determination TARMED (Changed)
Use
This release note is relevant for the country version Switzerland only. Documentation is not available inEnglish.
______________________________________________________________SAP AG 65
SAP-System______________________________________________________________
37.10.4 CH: TARMED - Service Rule C19 - Maximum (Changed)
Use
This release note is relevant for the country version Switzerland only. Documentation is not available inEnglish.
37.10.5 CH: TARMED (Changed)
Use
This release note is relevant for the country version Switzerland only. Documentation is not available inEnglish.
37.10.6 DE: Invoice Reduction due to Integrated Care (New)
Use
This release note is relevant for the country version Germany only. Documentation is not available inEnglish.
37.10.7 DE: Mapping Length of Stay Reductions (New)
Use
This release note is relevant for the country version Germany only. Documentation is not available inEnglish.
37.10.8 DE: Readmission Processing (New)
Use
This release note is relevant for the country version Germany only. Documentation is not available inEnglish.
37.10.9 AT, CH: Fee-Based Billing Reset (New)
Use
This release note is relevant for the country versions Austria and Switzerland only. Documentation is not
______________________________________________________________SAP AG 66
SAP-System______________________________________________________________
available in English.
37.10.10 DE: Checks During Creation of a Complete Readmission Case (New)
Use
This release note is relevant for the country version Germany only. Documentation is not available inEnglish.
37.10.11 AT: Billing (Changed)
Use
This release note is relevant for the country version Austria only. Documentation is not available inEnglish.
37.10.12 AT: Fee (Changed)
Use
This release note is relevant for the country version Austria only. Documentation is not available inEnglish.
37.10.13 AT: Service Rule A1/A2 - Flat Rate/Billability (Changed)
Use
This release note is relevant for the country version Austria only. Documentation is not available inEnglish.
37.10.14 AT: Service Rule A3 - Remapping - Selection Criterion Age (Changed)
Use
This release note is relevant for the country version Austria only. Documentation is not available inEnglish.
37.10.15 AT: Service Rule A4 - Maximum Values per Case/Department
______________________________________________________________SAP AG 67
SAP-System______________________________________________________________
(Changed)
Use
This release note is relevant for the country version Austria only. Documentation is not available inEnglish.
37.10.16 AT: Service Rule A6 - Maximum Service Values Scale (Changed)
Use
This release note is relevant for the country version Austria only. Documentation is not available inEnglish.
37.10.17 AT: Service Rule A9 - Maximum Values (Changed)
Use
This release note is relevant for the country version Austria only. Documentation is not available inEnglish.
37.10.18 AT: Service Rule AK: Exclusion Using Diagnoses (Changed)
Use
This release note is relevant for the country version Austria only. Documentation is not available inEnglish.
37.10.19 AT: Service Rules (Changed)
Use
This release note is relevant for the country version Austria only. Documentation is not available inEnglish.
37.10.20 IS-H-PA-INS Insurance Relationship
37.10.20.1 Alternative Invoice Recipient (Changed)
______________________________________________________________SAP AG 68
SAP-System______________________________________________________________
Use
With the release following SAP ECC Industry Extension Healthcare 6.0, we shall no longer supportthe alternative invoice recipient function.
The third-party payer concept has accommodated this function since SAP Patient Management 4.72.For further information about this function, see IS-H Hospital -> Patient Accounting -> InsuranceRelationships -> Third-Party Payer in the SAP Library.
37.10.20.2 Insurance Relationships at Patient Merge (New)
Use
As of SAP Patient Management 4.72 Add-On Support Package 10 and SAP ECC IndustryExtension Healthcare 6.0, you can merge patients without first having to adjust the insurancerelationship proposal pool. The system displays the proposal pool data for informational purposes andautomatically performs synchronization, if necessary.
If entries in the proposal pool that refer to the same insurance provider have different main person insureddata, employer of the main person insured, short or long text, healthcare smart card data, or contractscheme, the system thus no longer issues the warning message N1 104. If the corresponding entries forvalidity, type of coverage, insurance provider subgroup, insurance number for customer, status of insuredon the healthcare smart card, or status of insured supplement on the healthcare smart card in the proposalpool are
different, the system no longer issues the warning message N1 103.
See also
For more information, see the SAP Note 852538.
37.10.20.3 AT: Insurance Relationship: Third-Party Payer (Changed)
Use
______________________________________________________________SAP AG 69
SAP-System______________________________________________________________
This release note is relevant for the country version Austria only. Documentation is not available inEnglish.
37.10.21 IS-H-PA-SER Services
37.10.21.1 DE: Service Rule R22 (New)
Use
This release note is relevant for the country version Germany only. Documentation is not available inEnglish.
37.10.21.2 DE: Service Rule R7 (Changed)
Use
This release note is relevant for the country version Germany only. Documentation is not available inEnglish.
37.10.21.3 BAPIs of Function Group 2099 (Changed)
Use
As of SAP ECC Industry Extension Healthcare 6.0, the BAPIs of function group 2099 can handleSAPscript long texts.
37.10.21.4 Automatic Assignment of Treatment Certificate to Services (New)
Use
As of SAP ECC Industry Extension Healthcare 6.0, you can have a treatment certificateautomatically assigned to services.
This function is provided in the following transactions:
______________________________________________________________SAP AG 70
SAP-System______________________________________________________________
- Clinical Process Builder (transaction code NV2000)
- Service entry (transaction codes NL10 and NL10N)
- Maintenance of treatment certificates (transaction code NP44)
37.10.21.5 Service Entry: Batch Input Behavior (Changed)
Use
As of SAP ECC Industry Extension Healthcare 6.0, batch input for organizational unit-related serviceentry (transaction code NL04N) and service entry (transaction code NL10) has been switched over fromscreen 315 (SAPNL017) to screen 800 (SAPNL017).
To enable you to also change individual services in the new screen 800, the ok code POSI is still providedfor setting the cursor on an existing service.
If a service sequence number does not exist, the system issues a warning. The batch input is notterminated.
Effects on Existing Data
Since existing batch inputs created by the customer no longer run, you have to adjust them.
You can use batch inputs contained in the standard system without making any changes.
37.10.21.6 Form Processing in Clinical Process Builder (Enhanced)
Use
As of SAP ECC Industry Extension Healthcare 6.0, you can process all forms in service entry in theClinical Process Builder.
When you launch the transaction, the system proposes standard form, as in previous releases.
______________________________________________________________SAP AG 71
SAP-System______________________________________________________________
37.10.21.7 Integration of Service Subscreen in Clinical Process Builder(Enhanced
Use
As of SAP ECC Industry Extension Healthcare 6.0, the Services subscreen is fully integrated intothe Clinical Process Builder. This means that you can now make all service-relevant entries andchanges directly in the subscreen.
37.10.21.8 Batch Input Switched Over to Direct Transfer (New)
Use
As of SAP ECC Industry Extension Healthcare 6.0, data is no longer transferred into service entryscreen 200 (NL10-BI) using batch input as in previous releases. The system transfers the data directly.
Effects on System Administration
If you have developed your own programs that use batch input on screen 200 (NL10-BI), you have toadapt these programs to the new method.
______________________________________________________________SAP AG 72
SAP-System______________________________________________________________
37.10.22 IS-H-PA-VER Insurance Verification
37.10.22.1 Transactions for Insurance Verification (NK03 to NK10) (Deleted)
Use
For SAP ECC Industry Extension Healthcare 6.0, the transactions for insurance verification(transaction codes NK03 to NK10) have been removed from the area menus.
37.10.23 IS-H-PA-COP Copayment
37.10.23.1 Copayment: New Values for User Parameter DTZ (Changed)
Use
As of SAP ECC Industry Extension Healthcare 6.0, you can enter the new values 5 or 6 for the userparameter DTZ (Copayment Request/Copayment).
If you enter the value 5 for the user parameter DTZ, the system fills the copayment request fields. If youenter the value 6, the system fills the field for the copayment made.
The system assigns the following content to the fields:
- Document date = current date
- Currency = local currency
- Insurance provider: Where possible, the system proposes an insurance provider for which theCopayment Obligation indicator is set in the insurance relationship for the case. Otherwise, thesystem proposes an insurance provider for which a copayment procedure is defined in the insuranceprovider master. If neither exist, the system proposes the first active insurance provider for the case.
______________________________________________________________SAP AG 73
SAP-System______________________________________________________________
37.10.23.2 DE: Copayment Processing for Readmission Cases (Changed)
Use
This release note is relevant for the country version Germany only. Documentation is not available inEnglish.
37.10.23.3 DE: Outpatient Copayment/Practice Fee (New)
Use
This release note is relevant for the country version Germany only. Documentation is not available inEnglish.
37.10.23.4 Configure Outpatient Copayment Request and Payment (Changed)
Use
The IMG activities for the outpatient copayment Maintain Parameters for Copayment Requests(maintenance view V_TN22F) and Configure Copayment (maintenance view V_TN22G) have beenredesigned for SAP ECC Industry Extension Healthcare 6.0. The input fields on the detail screenhave been rearranged for greater clarity.
37.10.24 IS-H-PA-DPA Down Payment
37.10.24.1 Functional Enhancements in Down Payment Monitor (New)
Use
As of SAP ECC Industry Extension Healthcare 6.0, functional enhancements are provided forinsurance providers and outpatient cases in the down payment monitor (technical name RNAANZ01).
The following new functions are provided:
- Insurance-provider parameters have been added to the Down Payment Monitor InsuranceProvider group box in the IS-H: Down Payment Request Parameters view.
______________________________________________________________SAP AG 74
SAP-System______________________________________________________________
- The required-entry field Case Type has been added to the selection screen. In this field, you canchoose whether you want to process outpatient, inpatient, or day patient cases. Radio buttons on theselection screen enable you to select insurance providers or self-payers.
- Output of two different lists for self-payers and insurance providers.
- It is now also possible to generate down payment requests for self-payers and insurance providerswhen the output list shows a red traffic light.
- The fields Case Number, Insurance Provider, and Insurance Provider Customer have beenadded to the print structure RNF43 (IS-H: Generate Form Structure for Down PaymentRequest).
- New event Generate Outpatient Down Payment Request (ANZ031).
- New assignments of work organizer types to events have been made in the standard SAP system:ANZ011 ANZ031
ANZG ANZG (new)
RECHANZ RECHANZ (new)
RECH_01 RECH_10 (new)
RECH01CK (new) RECH10CK (new)
RECH_01D (new) RECH10TK (new)
RECH_01S (new) RECH_10D (new)
-- RECH_10S (new)
37.10.25 IS-H-PA-BIL Billing
37.10.25.1 DE: BDT Interface - SAP Enhancement NBDT0001 (Changed)
Use
This release note is relevant for the country version Germany only. Documentation is not available inEnglish.
37.10.25.2 CH: 5-Centime Rounding According to TARMED (Changed)
Use
______________________________________________________________SAP AG 75
SAP-System______________________________________________________________
This release note is relevant for the country version Switzerland only. Documentation is not available inEnglish.
37.10.25.3 DE: Outpatient Surgery (Changed)
Use
This release note is relevant for the country version Germany only. Documentation is not available inEnglish.
37.10.25.4 DE: Flat Rate per Case Regulation (FPV) 2005 (Changed)
Use
This release note is relevant for the country version Germany only. Documentation is not available inEnglish.
37.10.25.5 DE: Billing of Medically-Justified Companions (New)
Use
This release note is relevant for the country version Germany only. Documentation is not available inEnglish.
37.10.25.6 CA, CH, SG: Invoice Overview for Multiple Logical Invoices (New)
Use
As of SAP ECC Industry Extension Healthcare 6.0, you can have the system simultaneously displaythe billing documents of several logical invoices in the invoice overview (transaction code NA30).
In the country versions Switzerland, Singapore and Canada, the system displays all existing logicalinvoices in the invoice overview (transaction code NA30). Up to now, you were able to display all of thebilling documents of precisely one logical invoice in this invoice overview. Now when you choose theSelected Invoices pushbutton the system simultaneously displays the logical invoices you haveselected.
SAP no longer supports the Invoice Overview for Case (transaction code NA40).
______________________________________________________________SAP AG 76
SAP-System______________________________________________________________
37.10.25.7 DE: BDT Interface - New Field Label for Referral Certificate (New)
Use
This release note is relevant for the country version Germany only. Documentation is not available inEnglish.
37.10.25.8 DE: BDT Interface - Day Split (New)
Use
This release note is relevant for the country version Germany only. Documentation is not available inEnglish.
37.11 IS-H-MM Integration with Materials Management
37.11.1 Ordering Physician in Case-Related Material Consumption (New)
Use
As of SAP ECC Industry Extension Healthcare 6.0, an additional input-enabled field is provided inthe transactions for entering and changing material consumptions (transaction codes NMMC1, NMMC2and NMCO2).
You can now enter the physician who ordered the material in the consumption documentation. Alongwith the material batch number, this now guarantees the unique and complete medical documentation ofthe material consumptions.
The ordering physician and the patient have been added to the selection screen and to the selection list ofdisplayable fields in the material consumption list evaluation (transaction code NMCOL).
Effects on Customizing
If you use the transaction for transferring the material consumption data from files (transaction codeNMCO2) and also want to enter the ordering physician here, you have to adjust the structure of the datatransfer input file in Customizing.
For further information about this, see the IMG activity Data Transfer - Define Structures.
______________________________________________________________SAP AG 77
SAP-System______________________________________________________________
37.11.2 IS-H MM: Case-Related Material Consumption Documentation(Changed)
Use
As of SAP ECC Industry Extension Healthcare 6.0, the standard Business Add-Ins (BAdIs) of theClinical Process Builder for presetting fields and checking input are connected to the transaction formaintaining the material consumption (transaction code NMMC1).
This concerns the following BAdIs :
- ISH_NV2000_PBO: IS-H: Clinical Process Builder - Preset All Subscreens
- ISH_NV2000_PAI: IS-H: Clinical Process Builder - Check Subscreen Data
See also
For further information, see the BAdI documentation.
37.11.3 IS-H-MM-REQ Material Requisition
37.11.3.1 Material Requisition (Changed)
Use
As of SAP ECC Industry Extension Healthcare 6.0, the key fields in the material requisition(Material and Material Text) are no longer input-enabled after you have entered values in them. Thisprevents incorrect entries caused by subsequent changes.
If you want to change existing entries in the key fields, you have to cancel these entries, and then renewyour input.
You can continue to change fields that are not key fields (for example, Order Quantity) so long as youhave not yet transferred the requisition into Materials Management.
______________________________________________________________SAP AG 78
SAP-System______________________________________________________________
37.11.3.2 Collective Processing of Material Requisitions (Changed)
Use
As of SAP Patient Management 4.72 Add-On Support Package 3 and SAP ECC IndustryExtension Healthcare 6.0, the system displays the price based on the order unit in the Material Pricecolumn in collective processing of material requisitions (transaction code NMM4).
The field catalog now contains the Total Price column that enables you to display the total price of therequisition (quantity x price per order unit).
37.11.3.3 Field Catalog "IS-H: Hospital Pharmacy Materials List" (Enhanced)
Use
As of SAP Patient Management 4.72 Add-On Support Package 5 and SAP ECC IndustryExtension Healthcare 6.0, the field catalog of the report IS-H: Hospital Pharmacy Materials List(technical name RNLMAT01) contains the following additional fields:
- Catalog 1
- Catalog 2
- Catalog 3
37.11.3.4 Free-Text Requisitions in Material Requisition Collective Processing(Changed)
Use
______________________________________________________________SAP AG 79
SAP-System______________________________________________________________
As of SAP Patient Management 4.72 Add-On Support Package 5 and SAP ECC IndustryExtension Healthcare 6.0, you can enter free-text requisitions for materials in material requisitioncollective processing (technical name of report RNMMANF0; transaction code NMM4).
37.11.3.5 Pick List Field Catalog (Enhanced)
Use
As of SAP Patient Management 4.72 Add-On Support Package 5 and SAP ECC IndustryExtension Healthcare 6.0, the field catalog of the pick list (technical name RNMPICK0) contains theShelf-Life Expiration Date field.
The field contains the shelf-life expiration date of the relevant batch.
37.12 IS-H-IS Information System
37.12.1 IS-H-IS-GMS Government-Mandated Statistics
37.12.1.1 DE: AEB Statistics (Changed)
Use
This release note is relevant for the country version Germany only. Documentation is not available inEnglish.
37.12.1.2 DE: Report for Hospital Statistical Regulatory Requirements 2004
______________________________________________________________SAP AG 80
SAP-System______________________________________________________________
(New)
Use
This release note is relevant for the country version Germany only. Documentation is not available inEnglish.
37.12.1.3 AT: Statistics (Changed)
Use
This release note is relevant for the country version Austria only. Documentation is not available inEnglish.
37.12.2 IS-H-IS-STA Other Statistics
37.12.2.1 CH: Hospital Type/Category Added to Report RNREFRDT (Changed)
Use
This release note is relevant for the country version Switzerland only. Documentation is not available inEnglish.
37.13 IS-H-CM Communication
37.13.1 CH: TARMED - Service Interface Using BAPI (Changed)
Use
This release note is relevant for the country version Switzerland only. Documentation is not available inEnglish.
37.13.2 CH: ELACH - Transmission of an Alternative Service Code (New)
Use
This release note is relevant for the country version Switzerland only. Documentation is not available inEnglish.
______________________________________________________________SAP AG 81
SAP-System______________________________________________________________
37.13.3 CH: ELACH - New Method for BAdI (New)
Use
This release note is relevant for the country version Switzerland only. Documentation is not available inEnglish.
37.13.4 CH: ELACH - Electronic Invoice Transmission MediData (Changed)
Use
This release note is relevant for the country version Switzerland only. Documentation is not available inEnglish.
37.13.5 CH: Error Handling ALIS Service Interface (Changed)
Use
This release note is relevant for the country version Switzerland only. Documentation is not available inEnglish.
37.13.6 IS-H-CM-OUT Communication with Systems Outside theHospital
37.13.6.1 SG: NPMI: Length of External Code Increased from 6 to 13 Characters(New)
Use
As of SAP ECC Industry Extension Healthcare 6.0, you can assign 13-character external codes torisk information. These codes are used in the messages for the NPMI communication procedure.
Effects on Customizing
You can enter the external codes in the risk information catalog. If you use 13-character external codes,you must ensure that the communication partner accepts these codes.
______________________________________________________________SAP AG 82
SAP-System______________________________________________________________
37.13.6.2 DE: Transmission of Data According to Paragraph 21 KHEntgG(Changed)
Use
This release note is relevant for the country version Germany only. Documentation is not available inEnglish.
37.13.6.3 DE: Report "IS-H: DRG Data P21: Case Data" (Enhanced)
Use
This release note is relevant for the country version Germany only. Documentation is not available inEnglish.
37.13.6.4 AT: Data Interchange with Social Insurance Funds (New)
Use
This release note is relevant for the country version Austria only. Documentation is not available inEnglish.
37.13.6.5 AT: Data Interchange with Social Insurance Funds (Changed)
Use
This release note is relevant for the country version Austria only. Documentation is not available inEnglish.
37.13.6.6
YShort text
AT: Scoring (Changed)
Use
This release note is relevant for the country version Austria only. Documentation is not available inEnglish.
______________________________________________________________SAP AG 83
SAP-System______________________________________________________________
37.13.6.7 CH: New EDI Procedure XMLIN for MediData V4.0 (New)
Use
This release note is relevant for the country version Switzerland only. Documentation is not available inEnglish.
37.13.6.8 CH: RNADIN03 - Inclusion of Electronic Invoices (Changed)
Use
This release note is relevant for the country version Switzerland only. Documentation is not available inEnglish.
37.14 IS-H-TO Tools
37.14.1 Harmonization of Archiving Reports (Changed)
Use
The archiving reports RNARCF0W (write program) and RNARCF0D (deletion program) have beenreworked for SAP ECC Industry Extension Healthcare 6.0.
The selection screen and the results list have been adapted to the SAP-wide standards for processingarchiving objects. For information about the new selection parameters, see the respective F1 help.
The report RNARCF0W now displays the completion progress. If you run the program in thebackground, a progress message is written to the job log every 30 minutes. In dialog mode, the progressmessage is output in the status bar every 10 seconds.
The archiving object ISH_FALL now supports the SAP data archiving interruption function. This meansthat you can interrupt an archiving session in archive administration and continue it at a later point intime. For further information, see the documentation for archiving in the SAP system.
Effects on Customizing
Make the following changes in the IMG activity Set Up Case Archiving:
Call up the detail display for the archiving object ISH_FALL. For the Test Mode Variant field, selectthe variant SAP&TEST and for the Production Mode Variant field, select the variant SAP&PROD.
Then call the report RNARCF0D. Delete the variants PRODUKTIV and TESTLAUF for this report.
______________________________________________________________SAP AG 84
SAP-System______________________________________________________________
37.14.2 CH: Invoice Form (Smart Form) (Changed)
Use
This release note is relevant for the country version Switzerland only. Documentation is not available inEnglish.
37.14.3 DE: Form Print (Enhanced)
Use
This release note is relevant for the country version Germany only. Documentation is not available inEnglish.
37.14.4 Use of Form Overlays with Form Archiving (Changed)
Use
Customizing for work organizers has been redesigned for SAP ECC Industry Extension Healthcare6.0.
You can no longer store an overlay form for displaying archived forms. Instead, it is recommended totransfer important information from the overlay form to the print form.
37.14.5 PDF-Based Forms for Form Print (New)
Use
As of SAP ECC Industry Extension Healthcare 6.0, print output for forms is also accommodated byPDF-based form print. In Customizing for SAP Healthcare, you can now define PDF-based print formsfor the various work organizers, and activate them for print output.
______________________________________________________________SAP AG 85
SAP-System______________________________________________________________
Effects on Customizing
To be able to use the PDF-based print forms, you have to define PDF-based print forms for the variouswork organizers, and activate them for print output.
For more information about this, see SAP Healthcare - Industry-Specific Components for Hospitals-> Tools -> Work Organizer Management in the IS-H Implementation Guide.
37.14.6 Work Organizer Type ARCHCASE (Deleted)
Use
As of SAP ECC Industry Extension Healthcare 6.0, the work organizer type ARCHCASE and itsdependent objects are no longer available.
The work organizer type was used to print the data of archived cases. Since form print of archived casedata in SAP Patient Management is no longer possible, the work organizer type is no longer needed.
37.14.7 Program for Table NFALA Migration (Deleted)
Use
As of SAP ECC Industry Extension Healthcare 6.0, the program for migrating data from tableNFALA into the IS-H archive info system (technical name RNUARCAS0) no longer exists.
______________________________________________________________SAP AG 86
SAP-System______________________________________________________________