6

STA

ND

ARD

PRO

DU

CTS

STA

ND

ARD

PRO

DU

CTS

Standard duty. High shaft height with set screw lock.• Cast iron housing• Wide inner race bearing

• B-type or L3-type seals• Available with high temp.

bearings - See page 46B-type Seal L3-type Seal

UCP Pillow Blocks

UnitNo.

Shaft Dia.

d

(in. ) (mm)

Dimensions (in.)(mm)

H NWGS1S2BEA

BoltUsed

(in.)

Weight(lbs.)

HousingNo.

BearingNo.

Bi M

UCP 201 201-8202 202-10203

1/2

5/8

13/16

30.247/8

12435/8

9217/16

373/4

197/16

1117/32

13223/64

600.3937

10.03/8 P 203 1.5

UCP 204-12204

3/4 15/16

33.33/8 P 204 1.6

UCP 205-14205-15205 205-16

7/815/16

1

17/16

36.53/8 P 205 2.0

UCP 206-17206-18206 206-19206-20

11/16

11/8

13/16

11/4S

111/16*42.9

1/2 P 206 3.0

UCP 207-20207-21207-22207 207-23

11/4

15/16

13/8

17/16

17/8

47.61/2 P 207 4.0

UCP 208-24208-25208

11/2

19/16115/16**

49.21/2 P 208 5.0

UCP 209-26209-27209-28209

15/8

111/16

13/4

21/8

54.01/2 P 209 5.7

12

15

17

20

25

30

35

40

45

0.500012.7

219/32

669/16

147/16

1111/16

1711/2

3833/4

955

127

0.563014.3

227/32

725/8

161/2

1311/16

1711/2

3841/8

10551/2

140

0.626015.9

319/64

8411/16

189/16

1413/16

2113/4

4443/4

12165/16

160

0.689017.5

311/16

943/4

199/16

147/8

22129/32

485

127617/32

166

0.748019.0

4102

13/16

219/16

147/8

22251

57/16

13771/8

181

0.748019.0

417/64

1097/8

2219/32

1513/16

2121/8

5453/4

14671/2

190

UCW 201 201-8 202 202-10203

UC 204-12204

UC 205-14205-15 205 205-16

UC 206-17206-18206 206-19206-20

UC 207-20207-21207-22207 207-23

UC 208-24208-25208

UC 209-26209-27209-28209

0.748019.0

433/64

11515/16

2423/32

1815/16

2421/4

5761/4

1598

203

UCP 210-30210-31210 210-32

17/8

115/16

2S50

21/4

57.2

UC 210-30210-31210 210-32

5/8 P 210 6.8

0.874022.2

51/32

12811/16

2723/32

1815/16

2423/8

6067/8

17485/8

220

UCP 211-32211-34211 211-35

221/8

23/16

5521/2

63.5

UC 211-32211-34211 211-35

5/8 P 211 8.8

1.000025.4

61/32

15311/8

2813/16

2013/16

30211/16

6881/8

206103/4

273UCP 213-40

21321/2

653

76.2UC 213-40

2135/8 PX12 14.1

1.000025.4

533/64

14011/16

2725/32

201

25.421/2

64711/32

187917/32

242

UCP 212-36212212-38212-39

21/4

23/8

27/16

60 23/4

69.8

UC 212-36212 212-38212-39

5/8 P 212 11.2

1.189030.2

61/32

15311/8

2813/16

20113/16

3021/2

6481/8

206103/4

273UCP 214-43

214-44214

211/16

23/4

703

76.2UC 214-43

214-44214

UC 215-47215215-48

5/8 PX13 14.5

1.220531.0

1.338634.0

1.023626.0

1.500038.1

1.689042.9

1.937049.2

1.937049.2

2.031551.6

2.189055.6

2.563065.1

2.563065.1

2.937074.6

0.720518.3

0.775619.7

0.629916.0

1.000025.4

0.874022.2

1.189030.2

1.189030.2

1.283532.6

1.315033.4

1.563039.7

1.563039.7

1.748044.4

Interchange Page 91. *Also available 15/8" **Also available 21/8"

UCP 215-47215215-48

215/16

375 1.3110

33.3633/64

16611/8

291

25.411/4

31215/16

7581/2

2171013/16

27531/4

82.67/8 P 215 17.03.0630

77.81.7520

44.5

7

STAN

DA

RD PRO

DU

CTSSTA

ND

ARD

PROD

UCTS

Standard duty. High shaft height with eccentric locking collar.• Cast iron housing• Wide inner race bearing

• B-type or L3-type sealsB-type Seal L3-type Seal

NAP Pillow Blocks

UnitNo.

Shaft Dia.

d

(in. ) (mm)

Dimensions (in.)(mm)

H NWGS1S2BEA

BoltUsed

(in.)

Weight(lbs.)

HousingNo.

BearingNo.

Bi M J K

NAP 201 201-8 202 202-10203

1/2

5/8

13/16

30.247/8

12435/8

9217/16

373/4

197/16

1117/32

13223/64

600.5472

13.93/8 P 203 1.6

NAP 204-12204

3/4 15/16

33.33/8 P 204 1.7

NAP 205-14205-15205 205-16

7/815/16

1

17/16

36.53/8 P 205 2.1

NAP 206-17206-18206 206-19206-20

11/16

11/8

13/16

11/4S

111/16*42.9

1/2 P 206 3.1

NAP 207-20207-21207-22207 207-23

11/4

15/16

13/8

17/16

17/8

47.61/2 P 207 4.2

NAP 208-24208-25208

11/2

19/16115/16

49.21/2 P 208 5.3

NAP 209-26209-27209-28209

15/8

111/16

13/4

21/8

54.01/2 P 209 6.1

12

15

17

20

25

30

35

40

45

0.669317.0

219/32

669/16

147/16

1111/16

1711/2

3833/4

955

127

0.685017.4

227/32

725/8

161/2

1311/16

1711/2

3841/8

10551/2

140

0.716518.2

319/64

8411/16

189/16

1413/16

2113/4

4443/4

12165/16

160

0.740218.8

311/16

943/4

199/16

147/8

22129/32

485

127617/32

166

0.842521.4

4102

13/16

219/16

147/8

22251

57/16

13771/8

181

0.842521.4

417/64

1097/8

2219/32

1513/16

2121/8

5453/4

14671/2

190

NAW201 201-8 202 202-10 203

NA 204-12204

NA 205-14205-15205 205-16

NA 206-17206-18206 206-19206-20

NA 207-20207-21207-22207 207-23

NA 208-24208-25208

NA 209-26209-27209-28209

0.968524.6

433/64

11515/16

2423/32

1815/16

2421/4

5761/4

1598

203

NAP 210-30210-31210 210-32

17/8

115/16

2S50

21/4

57.2

NA 210-30210-31210 210-32

5/8 P 210 7.2

1.090527.7

51/32

12811/16

2723/32

1815/16

2423/8

6067/8

17485/8

220

NAP 211-32211-34211 211-35

221/8

23/16

5521/2

63.5

NA 211-32211-34211 211-35

5/8 P 211 9.4

1.342534.1

61/32

15311/8

2813/16

2013/16

30211/16

6881/8

206103/4

273NAP 213-40

21321/2

653

76.2NA 213-40

2137/8 P 213 14.0

1.216530.9

533/64

14011/16

2725/32

201

25.421/2

64711/32

187917/32

242

NAP 212-36212 212-38212-39

21/4

23/8

27/16

60 23/4

69.8

NA 212-36212 212-38212-39

5/8 P 212 11.9

633/64

16611/8

291

25.411/4

31215/16

7581/2

2171013/16

275NAP 215-47

215 215-48

215/16

375 31/4

82.6NA 215-47

215 215-48

7/8 P 215 18.3

1.712643.5

1.744144.3

1.468537.3

1.901648.3

2.011851.1

2.216556.3

2.216556.3

2.468562.7

2.811071.4

3.374085.7

3.063077.8

3.626092.1

0.669317.0

0.685017.4

0.547213.9

0.740218.8

0.716518.2

0.842521.4

0.842521.4

0.968524.6

1.090527.7

1.342534.1

1.216530.9

1.468537.3

0.37409.5

0.37409.5

0.37409.5

0.531513.5

0.468511.9

0.531513.5

0.531513.5

0.531513.5

0.630016.0

0.689017.5

0.630016.0

0.689017.5

1.311033.3

1.500038.1

1.126028.6

2.189055.6

1.752044.5

2.374060.3

2.500063.5

2.752069.9

3.000076.2

3.385886.0

3.315084.2

4.0157102.0

Interchange Page 91 *Also available 15/8" **Also available 21/8"

1.468537.3

**

8

STA

ND

ARD

PRO

DU

CTS

Standard duty. Low shaft height with set screw lock.

• Cast iron housing• Wide inner race bearing

• B-type or L3-type sealsB-type Seal L3-type Seal

UCPL Pillow Blocks

UnitNo.

Shaft Dia.

d

(in. ) (mm)

Dimensions (in.)(mm)

H NWGS1S2BEA

BoltUsed

(in.)

Weight(lbs.)

HousingNo.

BearingNo.

Bi M

UCPL 201201-8202202-10203

1/2

5/8

11/16

2747/8

12435/8

9217/16

373/4

197/16

1117/32

13215/64

570.3937

10.03/8 PL 203 1.4

UCPL 204-12204

3/4 11/4

31.83/8 PL 204 1.6

UCPL 205-14205-15205205-16

7/815/16

1

15/16

33.33/8 PL 205 1.9

UCPL 206-17206-18206206-19206-20

11/16

11/8

13/16

11/4S

19/16

39.71/2 PL 206 2.9

UCPL 207-20207-21207-22207207-23

11/4

15/16

13/8

17/16

113/16

46.01/2 PL 207 3.9

UCPL 208-24208-25208

11/2

19/16115/16

49.21/2 P 208 5.0

UCPL 209-26209-27209-28209

15/8

111/16

13/4

21/16

52.41/2 PL 209 5.7

12

15

17

20

25

30

35

40

45

0.500012.7

21/2

649/16

147/16

119/16

1411/2

3833/4

955

127

0.563014.3

245/64

695/8

167/16

1111/16

1811/2

3841/8

10551/2

140

0.626015.9

35/32

8011/16

189/16

1413/16

2113/4

4543/4

121611/32

161

0.689017.5

321/32

9325/32

209/16

147/8

2217/8

485

127619/32

167

0.748019.0

4102

13/16

219/16

147/8

22251

57/16

13771/8

181

0.748019.0

47/32

10729/32

239/16

1413/16

2021/8

5453/4

14671/2

191

UCW201 201-8 202 202-10203

UC 204-12204

UC 205-14205-15205 205-16

UC 206-17206-18206 206-19206-20

UC 207-20207-21207-22207 207-23

UC 208-24208-25208

UC 209-26209-27209-28209

0.748019.0

429/64

11329/32

2311/16

1815/16

2421/4

5761/4

15981/32

204

UCPL 210-30210-31210210-32

17/8

115/16

2S50

23/16

55.6

UC 210-30210-31210 210-32

5/8 PL 210 6.6

0.874022.2

461/64

1261

25.411/16

1815/16

2423/8

607

17885/8

219

UCPL 211-32211-34211211-35

221/8

23/16

5527/16

61.9

UC 211-32211-34211 211-35

5/8 PL 211 8.7

1.000025.4

57/16

13811/8

2911/16

1811/8

2923/4

7075/8

19493/4

248UCPL 213-40

21321/2

65211/16

68.3UC 213-40

2135/8 PL 213 13.9

1.000025.4

513/32

13711/32

26.511/16

181

25.421/2

6373/8

18797/16

240

UCPL 212-36212212-38212-39

21/4

23/8

27/16

60 211/16

68.3

UC 212-36212 212-38212-39

5/8 PL 212 10.9

1.311033.3

633/64

16611/8

291

25.411/4

31215/16

7581/2

2171013/16

275UCPL 215-47

215215-48

215/16

375 31/4

82.6UC 215-47

215 215-48

7/8 P 215 17.0

1.220531.0

1.338634.0

1.023626.0

1.500038.1

1.689042.9

1.937049.2

1.937049.2

2.031551.6

2.189055.6

2.563065.1

2.563065.1

3.063077.8

0.720518.3

0.775619.7

0.629916.0

1.000025.4

0.874022.2

1.189030.2

1.189030.2

1.283532.6

1.315033.4

1.563039.7

1.563039.7

1.752044.5

Interchange Page 91

9

STAN

DA

RD PRO

DU

CTS

Standard duty. Low shaft height with eccentric locking collar.• Cast iron housing• Wide inner race bearing

• B-type or L3-type sealsB-type Seal L3-type Seal

NAPL Pillow Blocks

UnitNo.

Shaft Dia.

d

(in. ) (mm)

Dimensions (in.)(mm)

H NWGS1S2BEA

BoltUsed

(in.)

Weight(lbs.)

HousingNo.

BearingNo.

Bi M J K

NAPL 201 201-8202 202-10203

1/2

5/8

11/16

2747/8

12435/8

9217/16

373/4

197/16

1117/32

13215/64

570.5472

13.93/8 PL 203 1.5

NAPL 204-12204

3/4 11/4

31.83/8 PL 204 1.7

NAPL 205-14205-15205 205-16

7/815/16

1

15/16

33.33/8 PL 205 2.0

NAPL 206-17206-18206206-19206-20

11/16

11/8

13/16

11/4S

19/16

39.71/2 PL 206 3.0

NAPL 207-20207-21207-22207207-23

11/4

15/16

13/8

17/16

113/16

46.01/2 PL 207 4.1

NAPL 208-24208-25208

11/2

19/16115/16

49.21/2 P 208 5.3

NAPL 209-26209-27209-28209

15/8

111/16

13/4

21/16

52.41/2 PL 209 6.1

12

15

17

20

25

30

35

40

45

0.669317.0

21/2

649/16

147/16

119/16

1411/2

3833/4

955

127

245/64

695/8

167/16

1111/16

1811/2

3841/8

10551/2

140

0.716518.2

35/32

8011/16

189/16

1413/16

2113/4

4543/4

121611/32

161

0.740218.8

321/32

9325/32

209/16

147/8

2217/8

485

127619/32

167

0.842521.4

4102

13/16

219/16

147/8

22251

57/16

13771/8

181

0.842521.4

47/32

10729/32

239/16

1413/16

2021/8

5453/4

14671/2

191

NAW 201201-8202202-10203

NA 204-12204

NA 205-14205-15205205-16

NA 206-17206-18206 206-19206-20

NA 207-20207-21207-22207207-23

NA 208-24208-25208

NA 209-26209-27209-28209

0.968524.6

429/64

11329/32

2311/16

1815/16

2421/4

5761/4

15981/32

204

NAPL 210-30210-31210 210-32

17/8

115/16

2S50

23/16

55.6

NA 210-30210-31210 210-32

5/8 PL 210 7.0

1.090627.7

461/64

1261

25.411/16

1815/16

2423/8

607

17885/8

219

NAPL 211-32211-34211 211-35

221/8

23/16

5527/16

61.9

NA 211-32211-34211 211-35

5/8 PL 211 9.3

1.342534.1

57/16

13811/8

2911/16

1811/8

2923/4

7075/8

19493/4

248NAPL 213-40

21321/2

65211/16

68.3NA 213-40

2135/8 PL 213 13.8

1.216530.9

513/32

13711/32

26.511/16

181

25.421/2

6373/8

18797/16

240

NAPL 212-36212212-38212-39

21/4

23/8

27/16

60 211/16

68.3

NA 212-36212 212-38212-39

5/8 PL 212 11.6

1.468537.3

633/64

16611/8

291

25.411/4

31215/16

7581/2

2171013/16

275NAPL 215-47

215215-48

215/16

375 31/4

82.6NA 215-47

215 215-48

7/8 P 215 18.3

1.712643.5

1.744144.3

1.468537.3

1.901648.3

2.011851.1

2.216556.3

2.216556.3

2.468562.7

2.811071.4

3.374085.7

3.063077.8

3.626092.1

0.669317.0

0.685017.4

0.547213.9

0.740218.8

0.716518.2

0.842521.4

0.842521.4

0.968524.6

1.090627.7

1.342534.1

1.216530.9

1.468537.3

0.37409.5

0.37409.5

0.37409.5

0.531513.5

0.468511.9

0.531513.5

0.531513.5

0.531513.5

0.629916.0

0.689017.5

0.629916.0

0.689017.5

1.311033.3

1.500038.1

1.126028.6

2.189055.6

1.752044.5

2.374060.3

2.500063.5

2.752069.9

3.000076.2

3.385886.0

3.315084.2

4.0157102.0

Interchange Page 91

0.685017.4

10

STA

ND

ARD

PRO

DU

CTS

• Cast iron housing• Narrow inner race bearing

with set screw lock

• K-type seals

K-type Seal

SBP & SBPL Pillow Blocks

SBP High shaft height

SBPL Low shaft height

Shaft Dia.

d

(in). (mm)

Dimensions (in.)(mm)

H NWGS1S2BEA

BoltUsed

(in.)

HousingNo.

BearingNo.

Bi M

SBP 204-12204

3/4 15/16

33.33/8 P 204 1.6

SBP 205-14205-15205 205-16

7/815/16

1

17/16

36.53/8 P 205 1.9

SBP 206-17206-18206 206-19206-20

11/16

11/8

13/16

11/4S

111/16*42.9

1/2 P 206 2.8

20

25

30

0.27567.0

219/32

669/16

147/16

1111/16

1711/2

3833/4

955

127

0.29537.5

227/32

725/8

161/2

1311/16

1711/2

3841/8

10551/2

140

0.31508.0

319/64

8411/16

189/16

1413/16

2113/4

4443/4

12165/16

160

SB 204-12G204G

SB 205-14G205-15G205G 205-16G

SB 206-17G206-18G206G 206-19G206-20G

0.984325.0

1.063027.0

1.181130.0

0.708718.0

0.866122.0

0.767719.5

0.37409.5

311/16

943/4

199/16

147/8

22129/32

485

127617/32

166

SBP 207-20207-21207-22207 207-23

3517/8

47.61/2 P 207 3.7

SB 207-20G207-21 207-22G207G 207-23G

1.299233.0

0.925223.5

SBPL 204-12204

3/4 11/4

31.83/8 PL 204 1.5

SBPL 205-14205-15205205-16

7/815/16

1

15/16

33.33/8 PL 205 1.8

SBPL 206-17206-18206206-19206-20

11/16

11/8

13/16

11/4S

19/16

39.71/2 PL 206 2.8

20

25

30

0.27567.0

21/2

649/16

147/16

119/16

1411/2

3833/4

955

127

0.29537.5

245/64

695/8

167/16

1111/16

1811/2

3841/8

10551/2

140

0.31508.0

35/32

8011/16

189/16

1413/16

2113/4

4543/4

121611/32

161

SB 204-12G204G

SB 205-14G205-15G205G 205-16G

SB 206-17G206-18G206G 206-19G206-20G

0.433111.0

4102

13/16

219/16

147/8

22251

57/16

13771/8

181SBPL 208-24

20811/2

40115/16

49.2SB 208-24G

208G1/2 4.9

0.984325.0

1.063027.0

1.181130.0

1.417336.0

0.708718.0

0.866122.0

0.767719.5

0.984325.0

0.37409.5

321/32

9325/32

209/16

147/8

2217/8

485

127619/32

167

SBPL 207-20207-21207-22207207-23

11/4

15/16

13/8

17/16

35113/16

46.01/2 PL 207 3.6

SB 207-20G207-21G207-22G207G 207-23G

1.299233.0

0.925223.5

Interchange Page 91 *Also available 15/8" **Also available 21/8"

SBP 201201-8202202-10203

1/2

5/8

13/16

30.23/8 P 203 1.4

12

15

17

0.23626.0

223/64

6017/32

137/16

1117/16

3735/8

9247/8

124

SB 201G 201-8G202G 202-10G 203G

0.866122.0

0.629916.0

0.433111.0

4102

13/16

219/16

147/8

22251

57/16

13771/8

181SBP 208-24

20811/2

40115/16**

49.2SB 208-24G

208G1/2 P 208 4.91.4173

36.00.9843

25.0

SBPL 201201-8202202-10203

1/2

5/8

11/16

273/8 PL 203 1.3

12

15

17

0.23626.0

215/64

5717/32

137/16

113/4

1917/16

3735/8

9247/8

124

SB 201G 201-8G202G202-10G 203G

0.866122.0

0.629916.0

P 208

UnitNo.

3/4

19

11/4

15/16

13/8

17/16

Weight(lbs.)

High shaft height with eccentric locking collar.• Cast iron housing• K-type seals

• Narrow inner race bearingK-type Seal

SAP Pillow Blocks

Interchange Page 91 *Also available 15/8" **Also available 21/8"

11

STAN

DA

RD PRO

DU

CTS

UnitNo.

Shaft Dia.

d

(in. ) (mm)

Dimensions (in.)(mm)

H NWGS1S2BEA

BoltUsed

(in.)

Weight(lbs.)

HousingNo.

BearingNo.

Bi M J K

SAP 201 201-8 202 202-10203

1/2

5/8

13/16

30.247/8

12435/8

9217/16

373/4

197/16

1117/32

13223/64

600.25596.5

3/8 P 203 1.6

SAP 204-12204

3/4 15/16

33.33/8 P 204 1.7

SAP 205-14205-15205 205-16

7/815/16

1

17/16

36.53/8 P 205 2.1

SAP 206-17206-18206 206-19206-20

11/16

11/8

13/16

11/4S

111/16*42.9

1/2 P 206 3.0

SAP 207-20207-21207-22207 207-23

11/4

15/16

13/8

17/16

17/8

47.61/2 P 207 4.1

SAP 208-24208-25208

11/2

19/16115/16**

49.21/2 P 208 5.1

SAP 209-26209-27209-28209

15/8

111/16

13/4

21/8

54.01/2 P 209 5.9

12

15

17

20

25

30

35

40

45

0.29537.5

219/32

669/16

147/16

1111/16

1711/2

3833/4

955

127

0.29537.5

227/32

725/8

161/2

1311/16

1711/2

3841/8

10551/2

140

0.35439.0

319/64

8411/16

189/16

1413/16

2113/4

4443/4

12165/16

160

0.37409.5

311/16

943/4

199/16

147/8

22129/32

485

127617/32

166

0.433111.0

4102

13/16

219/16

147/8

22251

57/16

13771/8

181

0.433111.0

417/64

1097/8

2219/32

1513/16

2121/8

5453/4

14671/2

190

SA 201G201-8G202G202-10G203G

SA 204-12G204G

SA 205-14G205-15G205G205-16G

SA 206-17G206-18G206G206-19G206-20G

SA 207-20G207-21G207-22G207G207-23G

SA 208-24G208-25G208G

SA 209-26G209-27G209-28G209G

0.433111.0

433/64

11515/16

2423/32

1815/16

2421/4

5761/4

1598

203

SAP 210-30210-31210 210-32

17/8

115/16

2S50

21/4

57.2

SA 210-30G210-31G210G210-32G

5/8 P 210 6.8

1.472412.0

51/32

12811/16

2723/32

1815/16

2423/8

6067/8

17485/8

220

SAP 211-32211-34211 211-35

221/8

23/16

5521/2

63.5

SA 211-32G211-34G211G211-35G

5/8 P 211 9.0

1.220531.0

1.220531.0

1.126028.6

1.405535.7

1.531538.9

1.720543.7

1.720543.7

1.720543.7

1.905548.4

0.551214.0

0.551314.0

0.496012.6

0.626015.9

0.582714.8

0.755919.2

0.755919.2

0.755919.2

0.803120.4

0.37409.5

0.37409.5

0.37409.5

0.531513.5

0.468511.9

0.531513.5

0.531513.5

0.531513.5

0.630016.0

1.311033.3

1.500038.1

1.126028.6

2.189055.6

1.752044.5

2.374060.3

2.500063.5

2.752069.9

3.000076.2

12

STA

ND

ARD

PRO

DU

CTS

Low shaft height with eccentriclocking collar.• Cast iron housing• K-type seals

• Narrow inner race bearing

K-type Seal

SAPL Pillow Blocks

Interchange Page 91

UnitNo.

Shaft Dia.

d

(in. ) (mm)

Dimensions (in.)(mm)

H NWGS1S2BEA

BoltUsed

(in.)

Weight(lbs.)

HousingNo.

BearingNo.

Bi M J K

SAPL 201 201-8202 202-10203

1/2

5/8

11/16

2747/8

12435/8

9217/16

373/4

197/16

1117/32

13215/64

570.25596.5

3/8 PL 203 1.5

SAPL 204-12204

3/4 11/4

31.83/8 PL 204 1.7

SAPL 205-14205-15205 205-16

7/815/16

1

15/16

33.33/8 PL 205 2.0

SAPL 206-17206-18206206-19206-20

11/16

11/8

13/16

11/4S

19/16

39.71/2 PL 206 3.0

SAPL 207-20207-21207-22207207-23

11/4

15/16

13/8

17/16

113/16

46.01/2 PL 207 4.0

SAPL 208-24208-25208

11/2

19/16115/16

49.21/2 P 208 5.0

SAPL 209-26209-27209-28209

15/8

111/16

13/4

21/16

52.41/2 PL 209 6.1

12

15

17

20

25

30

35

40

45

0.29537.5

21/2

649/16

147/16

119/16

1411/2

3833/4

955

127

245/64

695/8

167/16

1111/16

1811/2

3841/8

10551/2

140

0.35439.0

35/32

8011/16

189/16

1413/16

2113/4

4543/4

121611/32

161

0.37409.5

321/32

9325/32

209/16

147/8

2217/8

485

127619/32

167

0.433111.0

4102

13/16

219/16

147/8

22251

57/16

13771/8

181

0.433111.0

47/32

10729/32

239/16

1413/16

2021/8

5453/4

14671/2

191

SA 201G201-8G202G202-10G203G

SA 204-12G204G

SA 205-14G205-15G205G205-16G

SA 206-17G206-18G206G206-19G206-20G

SA 207-20G207-21G207-22G207G207-23G

SA 208-24G208-25G208G

SA 209-26G209-27G209-28G209G

0.433111.0

429/64

11329/32

2311/16

1815/16

2421/4

5761/4

15981/32

204

SAPL 210-30210-31210 210-32

17/8

115/16

2S50

23/16

55.6

SA 210-30G210-31G210G210-32G

5/8 PL 210 6.7

0.472412.0

461/64

1261

25.411/16

1815/16

2423/8

607

17885/8

219

SAPL 211-32211-34211 211-35

221/8

23/16

5527/16

61.9

SA 211-32G211-34G211G211-35G

5/8 PL 211 8.8

1.220531.0

1.220531.0

1.126028.6

1.405535.7

1.531538.9

1.720543.7

1.720543.7

1.720543.7

1.905548.4

0.551214.0

0.551314.0

0.496012.6

0.626015.9

0.582714.8

0.755919.2

0.755919.2

0.755919.2

0.803120.4

0.37409.5

0.37409.5

0.37409.5

0.531513.5

0.468511.9

0.531513.5

0.531513.5

0.531513.5

0.629916.0

1.311033.3

1.500038.1

1.126028.6

2.189055.6

1.752044.5

2.374060.3

2.500063.5

2.752069.9

3.000076.2

0.29537.5

13

STAN

DA

RD PRO

DU

CTS

Medium duty with set screw lock.• Wide inner race bearing with

greater load carrying capacity than standard duty

• Cast iron housing

• B-type sealsL3-type seals availablein some sizesB-type Seal L3-type Seal

UCPX Pillow Blocks

UnitNo.

Shaft Dia.

d

(in. ) (mm)

Dimensions (in.)(mm)

H NWGS1S2BEA

BoltUsed

(in.)

Weight(lbs.)

HousingNo.

BearingNo.

Bi M

UCP X05-14X05-15X05X05-16

7/815/16

1

111/16

42.91/2 P X05 3.5

UCP X06-18X06 X06-19X06-20

11/8

13/16

11/4

17/8

47.61/2 P X06 4.6

25

30

0.626015.9

319/64

83.711/16

189/16

14.213/16

2113/4

4443/4

12165/16

160

0.689017.5

311/16

93.73/4

19.19/16

14.27/8

22.4129/32

48.55

127617/32

165.9

UC X05-14X05-15X05X05-16

UC X06-18X06X06-19 207-20

1.311033.3

71/32

178.613/8

351

25.417/16

36.53

76.291/8

231.8113/4

298.5UCP X15

X15-47X15-48

215/16

3

75 31/2

88.9UC X15

X15-47X15-48

7/8 P X15 23.6

1.500038.1

1.689042.9

3.252082.6

0.874022.2

1.000025.4

1.941049.3

0.748019.0

43/16

106.413/16

20.69/16

14.215/16

23.8115/16

49.2517/32

140.571/4

184.2UCP X07-22

X07 X07-23

13/8

17/16

35 21/8

54.01/2 P X07 6.0

UC X07-22 X07 X07-23

1.937049.2

1.189030.2

0.748019.0

417/64

108.37/8

22.319/32

1513/16

20.621/8

54.153/4

146.171/2

190.5UCP X08-24

X0811/2

4021/8

54.01/2 P X08 7.7UC X08-24

X081.9370

49.21.1890

30.2

0.748019.0

433/64

114.715/16

23.823/32

18.315/16

23.821/4

57.261/4

158.88

203.2

UCP X09-26X09-27X09-28X09

15/8

111/16

13/4

45

21/4

57.25/8 P X09 8.2

UC X09-26X09-27X09-28 X09

2.031551.6

1.283532.6

0.874022.2

51/32

127.811/16

26.923/32

18.315/16

23.823/8

60.567/8

174.885/8

219.2

UCP X10-30X10-31X10 X10-32

17/8

115/16

250

21/2

63.55/8 P X10 10.1

UC X10-30X10-31X10 211-32

2.189055.6

1.315033.4

1.000025.4

533/64

140.111/16

26.925/32

19.81

25.421/2

63.5711/32

186.4917/32

242.1

UCP X11-34X11 X11-35X11-36

21/8

23/16

21/4

55 23/4

69.85/8 P X11 14.1

UC X11-34X11X11-35 212-36

2.563065.1

1.563039.7

1.000025.4

563/64

15211/8

28.613/16

20.413/16

30.2211/16

68.381/8

206.4103/4

273.1UCP X12

X12-38X12-39

23/8

27/16

60 376.2

5/8 P X12 17.0UC X12

X12-38 X12-39

2.563065.1

1.563039.7

1.563039.7

8203.2

19/16

401

25.4113/16

4633/8

85.7111/16

28114

355.6UCP X17

X17-55X17-56

37/16

31/2

85 4101.6

UC X17 X17-55X17-56

7/8 P X17 35.73.779596.0

2.216556.3

1.937049.2

927/32

250113/16

461.1329

251

4102

131/4

33717432

UCP X20 X20-63X20-64

315/16

4

100 5127.0

UC X20 X20-63 X20-64

1 P X20 66.84.6260117.5

2.689068.3

Interchange Page 91

1.189030.2

563/64

15211/8

28.613/16

20.413/16

30.2211/16

68.381/8

206.4103/4

273.1UCP X13-40

X1321/2

653

76.25/8 P X13 17.3UC X13-40

X132.9370

74.61.7480

44.4

1.311033.3

625/32

17213/8

3511/16

27251

31/2

899

22913330

UCP X14-43X14-44 X14

211/16

23/4

7031/2

88.97/8 P X14 24.5

UC X14-43X14-44 X14

3.063077.8

1.752044.5

14

STA

ND

ARD

PRO

DU

CTS

Light duty.• K-type seals• Narrow inner race bearing• Relubricatable unless otherwise specified K-type Seal

SBLP & SALP Pillow Blocks

SBLP Set screw type

SALP Eccentric locking collar type

UnitNo.

Shaft Dia.

d

(in. ) (mm)

Dimensions (in.)(mm)

H NWGS1S2BEA

BoltUsed

(in.)

Weight(lbs.)

HousingNo.

BearingNo.

Bi

UnitNo.

Shaft Dia.

d

(in. ) (mm) H NWGS1S2BEA

BoltUsed

(in.)

Weight(lbs.)

HousingNo.

BearingNo.

Bi K

SBLP 201-8202202-10

1/2

5/8

13/16

30.23/8 LP 203 0.815 0.2362

6.021/4

5715/32

127/16

115/8

16125

37/16

8741/2

114SB 201-8G

202G202-10G

0.866122.0

0.27567.0

29/16

651/2

137/16

115/8

1611/16

27313/16

97429/32

125SBLP 204-12

2043/4

2015/16

33.33/8 LP 204 1.0SB 204-12G

204G0.9843

25.0

0.29537.5

225/32

711/2

137/16

115/8

1615/32

29315/16

10051/8

130

SBLP 205-14205-15205205-16

7/815/16

125

17/16

36.53/8 LP 205 1.3

SB 205-14G205-15G205G205-16G

1.063027.0

0.31508.0

39/32

839/16

149/16

1413/16

2115/16

33411/16

11965/32

156

SBLP 206-18206206-19206-20

11/8

13/16

11/4S

30 111/16

42.91/2 LP 206 1.5

SB 206-18G206G 206-19G206-20G

1.181130.0

0.37409.5

323/32

945/8

169/16

1413/16

2113/8

355

12761/2

165

SBLP 207-20207-22207207-23

11/4

13/8

17/16

3517/8

47.61/2 LP 207 2.1

SB 207-20G207-22G207G 207-23G

1.299233.0

SALP 201-8202 202-10

1/2

5/8

13/16

30.23/8 LP 203 0.9

SALP 205-14205-15205205-16

7/815/16

1

17/16

36.53/8 LP 205 1.4

15

25

0.25596.5

21/4

5715/32

127/16

115/8

16125

37/16

8741/2

114

0.29537.5

225/32

711/2

137/16

115/8

1615/32

29315/16

10051/8

130

SA 201-8G202G202-10G

SA 205-14G205-15G 205G205-16G

0.35439.0

39/32

839/16

149/16

1413/16

2115/16

33411/16

11965/32

156

SALP 206-18206206-19206-20

11/8

13/16

11/4S

30 111/16

42.9

SA 206-18G206-G206-19G206-20G

1/2 LP 206 1.7

0.37409.5

323/32

945/8

169/16

1413/16

2113/8

355

12761/2

165

SALP 207-20207-22207207-23

11/4

13/8

17/16

3517/8

47.6

SA 207-20G207-22G207G 207-23G

1/2 LP 207 2.4

0.29537.5

29/16

651/2

137/16

115/8

1611/16

27313/16

97429/32

125SALP 204-12

2043/4

2015/16

33.3SA 204-12G

204G3/8 LP 204 1.2

1.126028.6

1.220531.0

1.405535.7

1.531538.9

1.220531.0

11/8

29

11/2

38

13/4

45

23/16

56

11/4

33

Interchange Page 91

Dimensions (in.)(mm)

SBLPSALP

15

STAN

DA

RD PRO

DU

CTS

Standard duty with set screw lock.• Cast iron housing• Wide inner race bearing

• B-type sealsL3-type seals availablein some sizesB-type Seal L3-type Seal

UCPA Tapped Base Pillow Blocks

UnitNo.

Shaft Dia.

d

(in. ) (mm)

Dimensions (in.)(mm)

H BiD-Min TapDepth

F-TappedHolesWBEA

Weight(lbs.)

HousingNo.

BearingNo.

M

1.220531.0

1/2

133/8"-16UNC

29/16

6511/2

382

50.827/8

73

UCPA 201-8202-10203204-12204

1/25/8

3/4

17

20

15/16

33.3 PA 204 1.4

UC 201-8202-10203204-12204

0.720518.3

1.338634.0

1/2

133/8"-16UNC

213/16

7111/2

382

50.8376

UCPA 205-14205-15205205-16

7/815/16

125

17/16

36.5 PA 205 1.6UC 205-14

205-15205 205-16

0.775619.7

1.500038.1

5/8

167/16"-14UNC

33/8

8611/2

383

76.24

102

UCPA 206-17206-18206206-19206-20

11/16

11/8

13/16

11/4S

30 111/16

42.9 PA 206 2.6

UC 206-17206-18206206-19206-20

0.874022.2

1.937049.2

3/4

191/2"-13UNC

315/16

10017/8

4831/2

88.945/8

117UCPA 208-24

208-25208

11/2

19/16

40115/16

49.2 PA 208 4.0UC 208-24

208-25208

1.189030.2

1.689042.9

3/4

191/2"-13UNC

33/4

9517/8

4831/4

82.641/4

108

UCPA 207-20207-21207-22207207-23

11/4

15/16

13/8

17/16

3517/8

47.6 PA 207 3.6

UC 207-20207-21207-22207207-23

1.000025.4

1.937049.2

3/4

191/2"-13UNC

41/4

108251

33/4

95.35

127

UCPA 209-26209-27209-28209

15/8

111/16

13/4

45

21/8

54.0 PA 209 5.0UC 209-26

209-27209-28209

1.189030.2

2.031551.6

7/8

225/8"-11UNC

45/8

117251

4101.6

51/2

140

UCPA 210-30210-31210210-32

17/8

115/16

2S50

21/4

57.2 PA 210 5.9UC 210-30

210-31210210-32

1.283532.6

Interchange Page 91

16

STA

ND

ARD

PRO

DU

CTS

Standard duty with eccentric locking collar.• Cast iron housing• Wide inner race bearing

• B-type sealsL3-type seals available in some sizes B-type Seal L3-type Seal

NAPA Tapped Base Pillow Blocks

UnitNo.

Shaft Dia.

d

(in. ) (mm) H BiD-Min TapDepth

F-TappedHolesWBEA

Weight(lbs.)

HousingNo.

BearingNo.

M

1.712643.5

1/2

133/8"-16UNC

29/16

6511/2

382

50.827/8

73

NAPA 201-8202-10204-12204

1/25/83/4

15/16

33.3 PA 204 1.6NA 201-8

202-10204-12204

0.669317.0

1.744144.3

1/2

133/8"-16UNC

213/16

7111/2

382

50.8376

NAPA 205-14205-15205205-16

7/815/16

1

17/16

36.5 PA 205 1.7NA 205-14

205-15205205-16

0.685017.4

1.901648.3

5/8

167/16"-14UNC

33/8

8611/2

383

76.24

102

NAPA 206-17206-18206206-19206-20

11/16

11/8

13/16

11/4S

111/16

42.9 PA 206 2.8

NA 206-17206-18206206-19206-20

0.716518.2

2.216556.3

3/4

191/2"-13UNC

315/16

10017/8

4831/2

88.945/8

117NAPA 208-24

208-25208

11/2

19/16115/16

49.2 PA 208 4.4NA 208-24

208-25208

0.842521.4

2.011851.1

3/4

191/2"-13UNC

33/4

9517/8

4831/4

82.641/4

108

NAPA 207-20207-21207-22207207-23

11/4

15/16

13/8

17/16

17/8

47.6 PA 207 3.9

NA 207-20207-21207-22207207-23

0.740218.8

2.216556.3

3/4

191/2"-13UNC

41/4

108251

33/4

95.35

127

NAPA 209-26209-27209-28209

15/8

111/16

13/4

21/8

54.0 PA 209 5.4NA 209-26

209-27209-28209

0.842521.4

0.685017.4

0.716518.2

0.669317.0

0.842521.4

0.740218.8

0.842521.4

N

25

30

40

35

45

20

2.468562.7

7/8

225/8"-11UNC

45/8

117251

4101.6

51/2

140

NAPA 210-30210-31210210-32

17/8

115/16

2S

21/4

57.2 PA 210 6.3NA 210-30

210-31210210-32

0.968524.6

0.968524.650

Dimensions (in.)(mm)

Interchange Page 91

17

STAN

DA

RD PRO

DU

CTS

• Cast iron housing• Narrow inner race bearing

• K-type seals

K-type Seal

SBPA & SAPA Tapped Base Pillow Blocks

SBPA Set screw type

SAPA Eccentric locking collar type

UnitNo.

Shaft Dia.

d

(in. ) (mm)

Dimensions (in.)(mm)

H BiD-Min TapDepth

F-TappedHoles

WBEA

Weight(lbs.)

HousingNo.

BearingNo.

M

1.063027.0

1/2

133/8"-16 UNC213/16

7111/2

382

50.8376

SBPA 205-14205-15205205-16

7/815/16

125

17/16

36.5 PA 205 1.5SB 205-14G

205-15G205G205-16G

0.767719.5

1.181130.0

5/8

167/16"-14UNC

33/8

8611/2

383

76.24

102

SBPA 206-17206-18206206-19206-20

11/16

11/8

13/16

11/4S

30 111/16

42.9 PA 206 2.5

SB 206-17G206-18G206G206-19G206-20G

0.866122.0

1.299233.0

3/4

191/2"-13 UNC33/4

9517/8

4831/4

82.641/4

108

SBPA 207-20207-21207-22207207-23

11/4

15/16

13/8

17/16

3517/8

47.6 PA 207 3.4

SB 207-20G207-21G207-22G207G207-23G

0.925223.5

0.984325.0

1/2

133/8"-16 UNC29/16

6511/2

382

50.827/8

73SBPA 204-12

2043/4

2015/16

33.3 PA 204 1.3SB 204-12G204G

0.708718.0

1.417336.0

3/4

191/2"-13 UNC315/16

10017/8

4831/2

88.945/8

117SBPA 208-24

20811/2

40115/16

49.2 PA 208 3.8SB 208-24G208G

0.984325.0

UnitNo.

Shaft Dia.

d

(in. ) (mm)

Dimensions (in.)(mm)

H BiD-Min TapDepth

F-TappedHoles

WBEA

Weight(lbs.)

HousingNo.

BearingNo.

M

1.220531.0

1/2

133/8"-16UNC

213/16

7111/2

382

50.8376

SAPA 205-14205-15205205-16

7/815/16

1

17/16

36.5 PA 205 1.6SA 205-14G

205-15G205G205-16G

0.551314.0

1.405535.7

5/8

167/16"-14UNC

33/8

8611/2

383

76.24

102

SAPA 206-17206-18206206-19206-20

11/16

11/8

13/16

11/4S

111/16

42.9 PA 206 2.6

SA 206-17G206-18G206G206-19G206-20G

0.582714.8

1.531538.9

3/4

191/2"-13UNC

33/4

9517/8

4831/4

82.641/4

108

SAPA 207-20207-21207-22207-23

11/4

15/16

13/8

17/16

17/8

47.6 PA 207 3.7SA 207-20G

207-21G207-22G207-23G

0.626015.9

1.220531.0

1/2

133/8"-16UNC

29/16

6511/2

382

50.827/8

73SAPA 204-12

2043/4 15/16

33.3 PA 204 1.4SA 204-12G204G

0.511214.0

1.720543.7

3/4

191/2"-13UNC

41/4

108251

33/4

95.35

127SAPA 209-27

209-28111/16

13/4

21/8

54.0 PA 209 5.1SA 209-27G209-28G

0.755919.2

1.720543.7

7/8

225/8"-11UNC

45/8

117251

4101.6

51/2

140SAPA 210-30

210-31210-32

17/8

115/16

2S21/4

57.2 PA 210 5.9SA 210-30G

210-31G210-32G

0.755919.2

0.35439.0

0.37409.5

0.29537.5

0.29537.5

0.433111.0

0.433111.0

N

0.433111.0

1.720543.7

3/4

191/2"-13UNC

315/16

10017/8

4831/2

88.945/8

117SAPA 208-24 11/2115/16

49.2 PA 208 4.2SA 208-24G0.755919.2

25

30

20

Interchange Page 91

18

STA

ND

ARD

PRO

DU

CTS

Standard duty with set screw lock.• Cast iron housing• Wide inner race bearing

• B-type or L3 type seals• Available with high temp.

bearing - See page 46 B-type Seal L3-type Seal

UCF 4-Bolt Flange Units

UnitNo.

Shaft Dia.

d

(in. ) (mm)

Dimensions (in.)(mm)

A MBiZSLGIE

BoltUsed

(in.)

Weight(lbs.)

HousingNo.

BearingNo.

N

0.720518.3

1.220531.0

15/16

33.37/16

111

25.47/16

1119/32

1521/2

64UCF 204-12

2043/4

2033/8

863/8 F 204 1.4UC 204-12

2040.5000

12.7

1.189030.2

1.937049.2

21/16

52.25/8

1611/2

385/8

1655/64

2241/8

105

UCF 209-26209-27209-28209

15/8

111/16

13/4

45

513/32

1379/16 F 209 5.2

UC 209-26209-27209-28209

0.748019.0

1.189030.2

1.937049.2

21/32

51.235/64

14113/32

3619/32

1553/64

214

102UCF 208-24

208-25208

11/2

19/16

4051/8

1301/2 F 208 4.2

UC 208-24208-25208

0.748019.0

0.629916.0

1.023626.0

19/32

32.77/16

1113/32

283/8

1021/32

16.721/8

54

UCF 201201-8202202-10203

1/2

5/8

12

15

17

376

3/8 F 203 1.2

UCW 201201-8202202-10203

0.393710.0

0.874022.2

1.500038.1

119/32

40.233/64

1317/32

311/2

1345/64

1831/4

83

UCF 206-17206-18206206-19206-20

11/16

11/8

13/16

11/4S

30 41/4

1087/16 F 206 2.4

UC 206-17206-18206206-19206-20

0.626015.9

1.000025.4

1.689042.9

13/4

44.433/64

13111/32

3419/32

153/4

1935/8

92

UCF 207-20207-21207-22207207-23

11/4

15/16

13/8

17/16

35419/32

1177/16 F 207 3.3

UC 207-20207-21207-22207207-23

0.689017.5

0.775619.7

1.338634.0

113/32

35.729/64

11.511/16

271/2

135/8

1623/4

70

UCF 205-14205-15205205-16

7/815/16

125

33/4

953/8 F 205 1.9

UC 205-14205-15205205-16

0.563014.3

1.283532.6

2.031551.6

25/32

54.65/8

1619/16

405/8

1655/64

2243/8

111

UCF 210-30210-31210210-32

17/8

115/16

2S50

55/8

1439/16 F 210 5.6

UC 210-30210-31210210-32

0.748019.0

1.315033.4

2.189055.6

25/16

58.443/64

17111/16

4323/32

1863/64

2551/8

130

UCF 211-32211-34211211-35

221/8

23/16

5561/2

1655/8 F 211 7.7

UC 211-32211-34211211-35

0.874022.2

1.563039.7

2.563065.1

223/32

68.743/64

1717/8

4823/32

1819/64

2955/8

143

UCF 212-36212212-38212-39

21/4

23/8

27/16

60 67/8

1755/8 F 212 9.4

UC 212-36212212-38212-39

1.000025.4

1.563039.7

2.563065.1

23/4

69.743/64

17131/32

507/8

2213/16

3057/8

149UCF 213-40

21321/2

6573/8

1875/8 F 213 12.9UC 213-40

2131.0000

25.4

1.752044.5

3.063077.8

33/32

78.53/4

1927/32

567/8

22111/32

34*61/4

159UCF 215-47

215215-48

215/16

375 77/8

20011/16 F 215 17.0

UC 215-47215215-48

1.311033.3

*Also available as 6", where Z = 33/8"—specify UCNF. Interchange Page 91

UCF 214-43214-44214

1.748044.4

2.937074.6

231/32

75.43/4

1921/8

5429/32

2317/32

31563/64

152211/16

23/4

70719/32

19311/16 F 214 13.9

UC 214-43214-44214

1.189030.2

19

STAN

DA

RD PRO

DU

CTS

Standard duty with eccentric locking collar.• Cast iron housing• Wide inner race bearing

• B-type or L3-type seals

B-type Seal L3-type Seal

NANF 4-Bolt Flange Units

UnitNo.

Shaft Dia.

d

(in. ) (mm)

Dimensions (in.)(mm)

NANF 204-12204

3/4 33/8

863/8 NF 204 1.8

NANF 201201-8202202-10203

1/2

5/8

376

3/8 F 203 1.3

NANF 208-24208-25208

11/2

19/1651/8

1301/2 NF 208 4.9

20

12

15

17

40

A MBiZSLGIE

BoltUsed

(in.)

Weight(lbs.)

HousingNo.

0.669317.0

1.712643.5

125/32

45.57/16

1115/32

29.519/32

153/4

1921/2

64

0.547213.9

1.468537.3

137/64

40.17/16

1113/32

283/8

1021/32

16.721/8

54

0.842521.4

2.216556.3

25/16

58.935/64

14117/32

3921/32

1715/16

244

102

BearingNo.

NA 204-12204

NAW201201-8202202-10203

NA 208-24208-25208

1.342534.1

3.374085.7

317/32

9025/32

2025/16

597/8

2211/2

3857/8

149NANF 213-40

21321/2

6573/8

187NA 213-40

2133/4 NF 213 13.2

0.669317.0

0.547213.9

0.842521.4

1.342534.1

N

1.311033.3

2.374060.3

1.126028.6

3.385886.0

K

0.37409.5

0.531513.5

0.37409.5

0.689017.5

J

0.685017.4

1.744144.3

127/32

46.929/64

11.517/32

3119/32

1525/32

2023/4

70

NANF 205-14205-15205205-16

7/815/16

125

33/4

953/8 NF 205 2.1

NA 205-14205-15205205-16

0.685017.4

1.500038.1

0.37409.5

0.716518.2

1.901648.3

251.1

33/64

13131/32

345/8

1653/64

2131/4

83

NANF 206-17206-18206206-19206-20

11/16

11/8

13/16

11/4S

30 41/4

1087/16 NF 206 2.9

NA 206-17206-18206206-19206-20

0.716518.2

1.752044.5

0.468511.9

0.740218.8

2.011851.1

21/8

53.833/64

1317/16

36.521/32

1727/32

21.535/8

92

NANF 207-20207-21207-22207207-23

11/4

15/16

13/8

17/16

35419/32

1177/16 NF 207 3.9

NA 207-20207-21207-22207207-23

0.740218.8

2.189055.6

0.531513.5

0.842521.4

2.216556.3

25/16

58.95/8

1619/16

4023/32

1815/16

2441/8

105

NANF 209-26209-27209-28209

15/8

111/16

13/4

45

513/32

1379/16 NF 209 5.7

NA 209-26209-27209-28209

0.842521.4

2.500063.5

0.531513.5

0.968524.6

2.468562.7

25/8

66.65/8

16127/32

46.525/32

2011/8

28.543/8

111

NANF 210-30210-31210210-32

17/8

115/16

2S50

55/8

1439/16 NF 210 6.5

NA 210-30210-31210210-32

0.968524.6

2.752069.9

0.531513.5

1.090627.7

2.811071.4

231/32

75.743/64

17131/32

5013/16

21117/64

3251/8

130

NANF 211-32211-34211211-35

221/8

23/16

5563/8

1625/8 NF 211 9.0

NA 211-32211-34211211-35

1.090627.7

3.000076.2

0.629916.0

1.216530.9

3.063077.8

31/4

82.943/64

1725/32

5513/16

21127/64

3655/8

143

NANF 212-36212212-38212-39

21/4

23/8

27/16

60 67/8

1755/8 NF 212 10.8

NA 212-36212212-38212-39

1.216530.9

3.315084.2

0.629916.0

1.468537.3

3.626092.0

325/32

9625/32

20227/64

617/8

2215/8

426

152NANF 215-47

215215-48

215/16

375 73/4

1973/4 NF 215 16.0

NA 215-47215215-48

1.468537.3

4.0157102.0

0.689017.5

Interchange Page 91

20

STA

ND

ARD

PRO

DU

CTS

• Cast iron housing• Narrow inner race bearing

• K-type seals• Set screw lock

K-type Seal

SBF 4-Bolt Flange Units

UnitNo.

Shaft Dia.

d

(in. ) (mm)

Dimensions (in.)(mm)

A MBiZSLGIE

BoltUsed

(in.)

Weight(lbs.)

HousingNo.

BearingNo.

N

0.708718.0

0.984325.0

119/64

337/16

111

25.47/16

1119/32

1521/2

64SBF 204-12

2043/4

2033/8

863/8 F 204 1.4SB 204-12G

204G0.27507.0

0.866122.0

1.181130.0

137/64

40.133/64

1317/32

311/2

1345/64

1831/4

83

SBF 206-17206-18206206-19206-20

11/16

11/8

13/16

11/4S

30 41/4

1087/16 F 206 2.2

SB 206-17G206-18G206G206-19G206-20G

0.31508.0

0.984325.0

1.417336.0

113/16

46.035/64

14113/32

3619/32

1553/64

214

102SBF 208-24

208-25208

11/2

19/16

4051/8

1301/2 F 208 4.1

SB 208-24G208-25G208G

0.433111.0

0.767719.5

1.063027.0

125/64

35.329/64

11.511/16

271/2

135/8

1623/4

70

SBF 205-14205-15205205-16

7/815/16

125

33/4

953/8 F 205 1.8

SB 205-14G205-15G205G205-16G

0.29537.5

0.925223.5

1.299233.0

143/64

42.533/64

13111/32

3419/32

153/4

1935/8

92

SBF 207-20207-21207-22207207-23

11/4

15/16

13/8

17/16

35419/32

1177/16 F 207 3.0

SB 207-20G207-21G207-22G207G207-23G

0.37409.5

Interchange Page 91

0.629916.0

0.866122.0

19/32

32.77/16

1113/32

283/8

1021/32

16.721/8

54

SBF 201201-8202202-10203

1/2

5/8

12

15

17

376

3/8 F 203 1.1

SB 201G201-8G202G202-10G203G

0.23626.0

21

STAN

DA

RD PRO

DU

CTS

• Cast iron housing • Narrow inner race bearing

• K-type seals• Eccentric locking collar

K-type Seal

SAF 4-Bolt Flange Units

UnitNo.

Shaft Dia.

d

(in. ) (mm)

Dimensions (in.)(mm)

A MBiZSLGIE

BoltUsed

(in.)

Weight(lbs.)

HousingNo.

BearingNo.

N

0.551214.0

1.220531.0

117/32

38.97/16

111

25.47/16

1119/32

1521/2

64SAF 204-12

2043/4

2033/8

863/8 F 204 1.4SA 204-12G

204G0.29537.5

0.755919.2

1.720543.7

25/32

54.75/8

1611/2

385/8

1655/64

2241/8

105

SAF 209-26209-27209-28209

15/8

111/16

13/4

45

513/32

1379/16 F 209 5.2

SA 209-26G209-27G209-28G209G

0.433111.0

0.755919.2

1.720543.7

21/8

53.735/64

14113/32

3619/32

1553/64

214

10211/2

19/16

4051/8

1301/2 F 208 4.2

SA 208-24G208-25G208G

0.433111.0

0.496012.6

1.126028.6

117/32

38.97/16

1113/32

283/8

1021/32

16.721/8

54

SAF 201201-8202202-10203

1/2

5/8

12

15

17

376

3/8 F 203 1.2

SA 201G201-8G202G202-10G203G

0.25596.5

0.582714.8

1.405535.7

151/64

45.633/64

1317/32

311/2

1345/64

1831/4

83

SAF 206-17206-18206206-19206-20

11/16

11/8

13/16

11/4S

30 41/4

1087/16 F 206 2.4

SA 206-17G206-18G206G206-19G206-20G

0.35439.0

0.626015.9

1.531538.9

115/16

49.033/64

13111/32

3419/32

153/4

1935/8

92

SAF 207-20207-21207-22207207-23

11/4

15/16

13/8

17/16

35419/32

1177/16 F 207 3.3

SA 207-20G207-21G207-22G207G207-23G

0.37409.5

0.551314.0

1.220531.0

135/64

39.329/64

11.511/16

271/2

135/8

1623/4

70

SAF 205-14205-15205205-16

7/815/16

125

33/4

953/8 F 205 1.9

SA 205-14G205-15G205G205-16G

0.29537.5

0.755919.2

1.720543.7

25/32

54.75/8

1619/16

405/8

1655/64

2243/8

111

SAF 210-30210-31210210-32

17/8

115/16

2S50

55/8

1439/16 F 210 5.6

SA 210-30G210-31G210G210-32G

0.433111.0

0.803120.4

1.905548.4

227/64

61.443/64

17111/16

4323/32

1863/64

2551/8

130

SAF 211-32211-34211211-35

221/8

23/16

5561/2

1655/8 F 211 7.7

SA 211-32G211-34G211G211-35G

0.472412.0

K

1.311033.3

2.500063.5

2.374060.3

1.126028.6

1.752044.5

2.189055.6

1.500038.1

2.752069.9

3.000076.2

SAF 208-24208-25208

Interchange Page 91

22

STA

ND

ARD

PRO

DU

CTS

Medium duty with set screw lock.• Wide inner race bearing

with greater load carrying capacity than standard duty

• Cast iron housing

• B-type sealsL3-type seals available in some sizes

UCFX 4-Bolt Flange Units

B-type Seal L3-type Seal

UnitNo.

Shaft Dia.

d

(in. ) (mm)

Dimensions (in.)(mm)

A MBiZSLGIE

BoltUsed

(in.)

Weight(lbs.)

HousingNo.

BearingNo.

N

0.874022.2

1.500038.1

119/32

40.233/64

1317/32

311/2

1345/64

1831/4

83

UCF X05-14X05-15X05X05-16

7/815/16

125

41/4

1087/16 F 206 2.6

UC X05-14X05-15X05X05-16

0.626015.9

1.189030.2

1.937049.2

21/32

51.235/64

14113/32

3619/32

1553/64

214

102UCF X07-22

X07X07-23

13/8

17/16

35 51/8

1301/2 F 208 4.4

UC X07-22X07X07-23

0.748019.0

1.748044.4

2.937074.6

33/32

78.521/32

1725/16

5913/16

21111/32

3457/8

149UCF X13-40

X1321/2

6573/8

1879/16 FX13 14.1UC X13-40

X131.1890

30.2

1.283532.6

2.031551.6

25/32

54.65/8

1619/16

405/8

1655/64

2243/8

111

UCF X09-26X09-27X09-28X09

15/8

111/16

13/4

45

55/8

1439/16 F 210 6.2

UC X09-26X09-27X09-28X09

0.748019.0

1.189030.2

1.937049.2

21/16

52.25/8

1611/2

385/8

1655/64

2241/8

105UCF X08-24

X0811/2

40513/32

1379/16 F 209 5.3UC X08-24

X080.7480

19.0

1.315033.4

2.189055.6

25/16

58.443/64

17111/16

4323/32

1863/64

2551/8

130

UCF X10-30X10-31X10X10-32

17/8

115/16

250

61/2

1655/8 F 211 8.4

UC X10-30X10-31X10211-32

0.874022.2

1.563039.7

2.563065.1

223/32

68.743/64

1717/8

4823/32

1819/64

2955/8

143

UCF X11-34X11X11-35X11-36

21/8

23/16

21/4

55 67/8

1755/8 F 212 10.8

UC X11-34X11X11-35212-36

1.000025.4

1.563039.7

2.563065.1

229/32

73.843/64

17131/32

507/8

2213/16

3057/8

149UCF X12

X12-38X12-39

23/8

27/16

60 73/8

1875/8 F 213 12.6

UC X12X12-38X12-39

1.000025.4

1.752044.5

3.063077.8

313/32

86.525/32

20227/64

617/8

2215/8

426

152UCF X14-43

X14-44X14

211/16

23/4

7073/4

19711/16 NF215 15.6

UC X14-43X14-44X14

1.311033.3

1.941049.3

3.252082.6

317/32

89.725/32

20211/16

6815/16

24137/64

406

152UCF X15-47

X15X15-48

215/16

375 73/4

19711/16 FX15 18.5

UC X15-47X15X15-48

1.311033.3

2.216556.3

3.779596.0

325/32

96.025/32

2023/4

7015/16

24137/64

4063/4

171UCF X17

X17-55X17-56

37/16

31/2

85 87/16

21411/16 FX17 24.0

UC X17X17-55X17-56

1.563039.7

2.689068.3

4.6260117.5

45/8

117.517/32

31313/16

9713/32

28221/64

5985/16

211UCF X20

X20-63X20-64

315/16

4

100 109/16

268 1 FX20 42.5

1.000025.4

1.689042.9

13/4

44.433/64

13111/32

3419/32

153/4

1935/8

92

UCF X06-18X06X06-19X06-20

11/8

13/16

11/4

30 419/32

1177/16 F 207 3.5

UC X06-18X06X06-19207-20

0.689017.5

UC X20X20-63X20-64

1.937049.2

Interchange Page 91

23

STAN

DA

RD PRO

DU

CTS

• Ductile iron housing• Narrow inner race bearing

• K-type seals

K-type Seal

SARFB Eccentric locking collar type

SBRFB Set screw type

UnitNo.

Shaft Dia.

d

(in. ) (mm)

Dimensions (in.)(mm)

A (in)ZSLBGE

Weight(lbs.)

HousingNo.

BearingNo.

Bi

5/1617/32

31.011/32

925/32

2027/8

737/16

113

76.2

SBRFB 205-14205205-15205-16

7/8

15/16

1

25 33/4

95 RFB 205 .9SB 205-14G

205G205-15G205-16G

1.063027.0

3/815/16

33.313/32

1057/64

23376

15/32

1239/16

90.5

SBRFB 206-17206-18206206-19206-20

11/16

11/8

13/16

11/4S

30 47/16

113 RFB 206 1.2

SB 206-17G206-18G206G206-19G206-20G

1.181130.0

3/817/16

36.513/32

1015/16

2431/2

891/2

13315/16

100

SBRFB 207-20207-21207-22207207-23

11/4

15/16

13/8

17/16

35413/16

122 RFB 207 1.7

SB 207-20G207-21G207-22G207G207-23G

1.299233.0

5/1615/32

29.411/32

925/32

2025/8

677/16

11213/16

71.4SBRFB 204-12

2043/4

2039/16

90 RFB 204 .8SB 204-12G204G

0.984325.0

27/32

56

213/32

61

17/8

48

125/32

45

Y

BoltUsed

UnitNo.

Shaft Dia.

d

(in. ) (mm)

Dimensions (in.)(mm)

A (in)ZSLBGE

Weight(lbs.)

HousingNo.

BearingNo.

Bi

5/1613/8

34.911/32

925/32

2027/8

737/16

113

76.2

SARFB 205-14205205-15205-16

7/8

15/16

1

25 33/4

95 RFB 205 1.0SA 205-14G

205G205-15G205-16G

1.220531.0

3/8117/32

38.913/32

1057/64

23376

15/32

1239/16

90.5

SARFB 206-17206-18206206-19206-20

11/16

11/8

13/16

11/4S

30 47/16

113 RFB 206 1.3

SA 206-17G206-18G206G206-19G206-20G

1.405535.7

3/8121/32

42.113/32

1015/16

2431/2

891/2

13315/16

100

SARFB 207-20207-21207-22207207-23

11/4

15/16

13/8

17/16

35413/16

122 RFB 207 2.0

SA 207-20G207-21G207-22G207G207-23G

1.531538.9

5/1615/16

33.311/32

925/32

2025/8

677/16

11213/16

71.4SARFB 204-12

2043/4

2039/16

90 RFB 204 .9SA 204-12G204G

1.220531.0

27/32

56

213/32

61

17/8

48

125/32

45

Y

BoltUsed

SBRFB & SARFB 3-Bolt Flange Units

Interchange Page 91

24

STA

ND

ARD

PRO

DU

CTS

Standard duty with set screw lock.• Cast iron housing• Wide inner race bearing

• B-type or L3-type seals• Available with high temp.

bearing - See page 46 B-type Seal L3-type Seal

UCFL 2-Bolt Flange Units

Interchange Page 91

UnitNo.

Shaft Dia.

d

(in. ) (mm)

Dimensions (in.)(mm)

UCFL 201201-8202202-10203

1/2

5/8

413/32

1123

76.243/64

177/16

1131/32

2525/64

1023/8

6015/16

33.30.3937

10.05/16 FT 203 0.9

UCFL 204-12204

3/4 47/16

1135/16 FL 204 1.0

UCFL 205-14205-15205205-16

7/815/16

1

51/8

1303/8 FL 205 1.5

UCFL 207-20207-21207-22207207-23

11/4

15/16

13/8

17/16

611/32

1617/16 FL 207 2.9

UCFL 208-24208-25208

11/2

19/1667/8

1757/16 FL 208 3.5

UCFL 206-17206-18206206-19206-20

11/16

11/8

13/16

11/4S

513/16

1483/8 FL 206 2.2

12

15

17

20

25

35

40

30

A NZBSLGIE

BoltUsed

(in.)

Weight(lbs.)

HousingNo.

0.500012.7

15/16

33.323/8

6025/64

10125

7/16

1119/32

15317/32

89.7

0.563014.3

115/32

37.3211/16

6815/32

11.911/16

271/2

135/8

16357/64

98.8

0.689017.5

13/4

44.5317/32

9033/64

13111/32

349/16

143/4

1951/8

130.2

0.748019.0

250.8

315/16

10033/64

13113/32

369/16

1453/64

21521/32

143.7

0.626015.9

119/32

40.535/32

8015/32

11.917/32

311/2

1345/64

18419/32

116.7

BearingNo.

UCW 201201-8202202-10203

UC 204-12204

UC 205-14205-15205205-16

UC 207-20207-21207-22207207-23

UC 208-24208-25208

UC 206-17206-18206206-19206-20

0.748019.0

21/16

52.441/4

10819/32

1511/2

3819/32

1555/64

22527/32

148.4

UCFL 209-26209-27209-28209

15/8

111/16

13/4

45

713/32

188

UC 209-26209-27209-28209

1/2 FL 209 4.4

0.748019.0

25/32

54.8417/32

1155/8

1619/16

4019/32

1555/64

2263/16

157

UCFL 210-30210-31210210-32

17/8

115/16

2S50

73/4

197

UC 210-30210-31210210-32

1/2 FL 210 5.1

0.874022.2

25/16

58.751/8

13041/64

16.3111/16

4323/32

1863/64

2571/4

184

UCFL 211-32211-34211211-35

221/8

23/16

55813/16

224

UC 211-32211-34211211-35

9/16 FL 211 7.3

1.220531.0

1.023626.0

1.338634.0

1.689042.9

1.937049.2

1.500038.1

1.937049.2

2.031551.6

2.189055.6

Bi

0.720518.3

0.629916.0

1.000025.4

0.775619.7

1.189030.2

0.874022.2

1.189030.2

1.283532.6

1.315033.4

M

1.000025.4

223/32

69.151/2

14041/64

16.317/8

4823/32

1819/64

29715/16

201.6

UCFL 212-36212212-38212-39

21/4

23/8

27/16

60 927/32

250

UC 212-36212212-38212-39

9/16 FL 212 9.52.563065.1

1.563039.7

25

STAN

DA

RD PRO

DU

CTS

Standard duty with eccentric locking collar.• Cast iron housing• Wide inner race bearing

• B-type or L3-type seals

B-type Seal L3-type Seal

NANFL 2-Bolt Flange Units

UnitNo.

Shaft Dia.

d

(in.) (mm)

Dimensions (in.)(mm)

A NZBSLGIE

BoltUsed

(in.)Bi M J K

NANFL 201201-8202202-10203

1/2

5/8

413/32

1123

76.243/64

177/16

1131/32

2525/64

1023/8

60119/32

40.50.5472

13.95/16 FT 203 1.2

NANFL 204-12204

3/4 47/16

1135/16 NFL 204 1.3

NANFL 205-14205-15205205-16

7/815/16

1

51/8

1303/8 NFL 205 2.0

NANFL 206-17206-18206206-19206-20

11/16

11/8

13/16

11/4S

513/16

1483/8 NFL 206 2.5

NANFL 207-20207-21207-22207207-23

11/4

15/16

13/8

17/16

611/32

1617/16 NFL 207 3.5

NANFL 208-24208-25208

11/2

19/1667/8

1757/16 NFL 208 4.5

NANFL 209-26209-27209-28209

15/8

111/16

13/4

713/32

1881/2 NFL 209 5.2

12

15

17

20

25

30

35

40

45

0.669317.0

125/32

45.523/8

6025/64

1015/32

29.57/16

113/4

19317/32

89.7

0.685017.4

127/32

46.7211/16

6815/32

11.917/32

311/2

1325/32

20357/64

98.8

0.716518.2

251.1

35/32

8015/32

11.9111/32

341/2

1353/64

21419/32

116.7

0.740218.8

21/8

53.8317/32

9033/64

1317/16

36.59/16

1427/32

21.551/8

130.2

0.842521.4

25/16

58.9315/16

10033/64

13117/32

399/16

1415/16

24521/32

143.7

0.842521.4

25/16

58.941/4

10819/32

1519/16

409/16

1415/16

24527/32

148.4

NAW201201-8202202-10203

NA 204-12204

NA 205-14205-15205205-16

NA 206-17 206-18206206-19206-20

NA 207-20207-21207-22207207-23

NA 208-24208-25208

NA 209-26209-27209-28209

0.968524.6

25/8

66.6417/32

11519/32

15127/32

46.59/16

1411/8

28.563/16

157

NANFL 210-30210-31210210-32

17/8

115/16

2S50

73/4

197

NA 210-30210-31210210-32

1/2 NFL 210 6.1

1.090627.7

231/32

75.751/8

13041/64

16.3131/32

5013/16

20117/64

3271/4

184

NANFL 211-32211-34211211-35

221/8

23/16

55813/16

224

NA 211-32211-34211211-35

9/16 NFL 211 9.2

1.712643.5

1.744144.3

1.468537.3

1.901648.3

2.011851.1

2.216556.3

2.216556.3

2.468562.7

2.811071.4

0.669317.0

0.685017.4

0.547213.9

0.740218.8

0.716518.2

0.842521.4

0.842521.4

0.968524.6

1.090627.7

0.37409.5

0.37409.5

0.37409.5

0.531513.5

0.468511.9

0.531513.5

0.531513.5

0.531513.5

0.629916.0

1.311033.3

1.500038.1

1.126028.6

2.189055.6

1.752044.5

2.374060.3

2.500063.5

2.752069.9

3.000076.2

1.216530.9

31/4

82.951/2

14041/64

16.325/32

5513/16

20127/64

36715/16

202

NANFL 212-36212212-38212-39

21/4

23/8

27/16

60 927/32

250

NA 212-36212212-38212-39

9/16 NFL 212 11.13.063077.8

1.216530.9

0.629916.0

3.315084.2

Interchange Page 91

Weight(lbs.)

HousingNo.

BearingNo.

26

STA

ND

ARD

PRO

DU

CTS

K-type Seal

• Cast iron housing• Narrow inner race bearing

• K-type seals

SBFL & SAFL 2-Bolt Flange Units

UnitNo.

Shaft Dia.

d

(in. )

Dimensions (in.)(mm)

A NZBSLGIE

BoltUsed

(in.)

Weight(lbs.)

HousingNo.

BearingNo.

Bi M

SAFL 206-17206-18206-19206-20

11/16

11/8

13/16

11/4S

513/16

148419/32

116.745/64

181/2

1317/32

3115/32

11.935/32

8019/32

32.50.35439.0

3/8 FL 206 2.1

SAFL 204-12 3/447/16

1135/16 FL 204 1.1

SAFL 205-14205-15205-16

7/815/16

151/8

1303/8 FL 205 1.5

SAFL 207-20207-21207-22207-23

11/4

15/16

13/8

17/16

611/32

1617/16 FL 207 2.9

SAFL 208-24208-25

11/2

19/16

67/8

1757/16 FL 208 3.5

0.29537.5

19/64

29.023/8

6025/64

10125

7/16

1119/32

15317/32

89.7

0.29537.5

111/64

29.8211/16

6815/32

11.911/16

271/2

135/8

16357/64

98.8

0.37409.5

13/8

34.9317/32

9033/64

13111/32

349/16

143/4

1951/8

130.2

0.433111.0

137/64

40.1315/16

10033/64

13113/32

369/16

1453/64

21521/32

143.7

SA 206-17G206-18G206-19G206-20G

SA 204-12G

SA 205-14G205-15G205-16G

SA 207-20G207-21G207-22G207-23G

SA 208-24G208-25G

1.220531.0

1.220531.0

1.405535.7

1.531538.9

1.720543.7

0.551214.0

0.551314.0

0.582714.8

0.626015.9

0.755919.2

Interchange Page 91

SAFL 201-8202-10

1/25/8

413/32

1123

76.243/64

177/16

1131/32

2525/64

1023/8

60135/64

39.10.25596.5

5/16 FT 203 1.0SA 201-8G202-10G

1.126028.6

0.496012.6

UnitNo.

Shaft Dia.

d

(in. ) (mm)

Dimensions (in.)(mm)

A NZBSLGIE

BoltUsed

(in.)

Weight(lbs.)

HousingNo.

BearingNo.

Bi M

SBFL 206-17206-18206206-19206-20

11/16

11/8

13/16

11/4S

513/16

148419/32

116.745/64

181/2

1317/32

3115/32

11.935/32

8019/16

39.70.31508.0

3/8 FL 206 2.1

SBFL 204-12204

3/4 47/16

1135/16 FL 204 1.0

SBFL 205-14205-15205205-16

7/815/16

1

51/8

1303/8 FL 205 1.5

SBFL 207-20207-21207-22207207-23

11/4

15/16

13/8

17/16

611/32

1617/16 FL 207 2.8

SBFL 208-24208

11/2 67/8

1757/16 FL 208 3.4

30

20

25

35

40

0.27567.0

119/64

32.923/8

6025/64

10125

7/16

1119/32

15317/32

89.7

0.29537.5

125/64

35.3211/16

6815/32

11.911/16

271/2

135/8

16357/64

98.8

0.37409.5

143/64

42.5317/32

9033/64

13111/32

349/16

143/4

1951/8

130.2

0.433111.0

113/16

46.0315/16

10033/64

13113/32

369/16

1453/64

21521/32

143.7

SB 206-17G206-18G206G206-19G206-20G

SB 204-12G204G

SB 205-14G205-15G205G205-16G

SB 207-20G207-21G207-22G207G207-23G

SB 208-24G208G

0.984325.0

1.063027.0

1.181130.0

1.299233.0

1.417336.0

0.708718.0

0.767719.5

0.866122.0

0.925223.5

0.984325.0

SBFL 201201-8202202-10203

1/2

5/8

413/32

1123

76.243/64

177/16

1131/32

2525/64

1023/8

60119/64

32.90.23626.0

5/16 FT 203 .9

12

15

17

SB 201G201-8G202G202-10G203G

0.866122.0

0.629916.0

SAFL 209-26209-27209-28

15/8

111/16

13/4

713/32

188527/32

148.455/64

2219/32

1511/2

3819/32

1541/4

10825/32

54.70.4331

11.01/2 FL 209 4.7

SA 209-26G209-27G209-28G

1.720543.7

0.755919.2

K

1.311033.3

1.500038.1

1.752044.5

2.189055.6

2.374060.3

1.126028.6

2.500063.5

SAFL 210-30210-31210-32

17/8

115/16

2S73/4

19763/16

15755/64

2219/32

1519/16

405/8

16417/32

11525/32

54.70.4331

11.01/2 FL 210 5.0

SA 210-30G210-31G210-32G

1.720543.7

0.755919.2

2.752069.9

SAFL 211-32211-34211-35

221/8

23/16

813/16

22471/4

18463/64

2523/32

18111/16

4341/64

16.351/8

130227/64

61.40.4724

12.09/16 FL 211 7.0

SA 211-32G211-34G211-35G

1.905548.4

0.803120.4

3.000076.2

SAFL Eccentric locking collar type

SBFL Set screw type

27

STAN

DA

RD PRO

DU

CTS

B-type Seal L3 type Seal

Medium duty with set screw lock.• Wide inner race with greater

load carrying capacity than standard duty

• Cast iron housing

• B-type sealsL3-type seals available in some sizes

2-Bolt Flange Units

UnitNo.

Shaft Dia.

d

(in. ) (mm)

Dimensions (in.)(mm)

UCFL X08-24X08

11/2 713/32

1881/2 FL 209 4.6

UCFL X09-27X09-28X09

111/16

13/473/4

1971/2 FL 210 5.3

40

45

A NZBSLGIE

BoltUsed

(in.)

Weight(lbs.)

HousingNo.

0.748019.0

21/16

52.441/4

10819/32

1511/2

3819/32

1555/64

22527/32

148.4

0.748019.0

25/32

54.8417/32

1155/8

1619/16

4019/32

1555/64

2263/16

157

BearingNo.

UCX08-24X08

UCX09-27X09-28X09

0.874022.2

25/16

58.751/8

13041/64

16.3111/16

4323/32

1863/64

2571/4

184

UCFL X10-30X10-31X10X10-32

17/8

115/16

250

813/16

224

UCX10-30X10-31X10211-32

9/16 FL 211 8.4

1.000025.4

223/32

69.151/2

14041/64

16.317/8

4823/32

1819/64

29715/16

201.6UCFL X11

X11-35X11-36

23/16

21/4

55 927/32

250UCX11

X11-35212-36

9/16 FL 212 9.9

1.937049.2

2.031551.6

2.189055.6

2.563065.1

Bi

1.189030.2

1.283532.6

1.315033.4

1.563039.7

M

0.689017.5

13/4

44.5317/32

9033/64

13111/32

349/16

143/4

1951/8

130.2

UCFL X06-18X06X06-19X06-20

11/8

13/16

11/4

30 611/32

1617/16 FL 207 3.3

UCX06-18X06X06-19207-20

1.689042.9

1.000025.4

0.748019.0

250.8

315/16

10033/64

13113/32

369/16

1453/64

21521/32

143.7UCFL X07-22

X07X07-23

13/8

17/16

35 67/8

1757/16 FL 208 4.2

UCFL X05-14X05-15X05X05-16

7/815/16

1

513/16

1483/8 FL 206 2.425

0.626015.9

119/32

40.535/32

8015/32

11.917/32

311/2

1345/64

18419/32

116.7

UCX05-14X05-15X05X05-16

1.500038.1

0.874022.2

UCX07-22X07X07-23

1.937049.2

1.189030.2

UnitNo.

Shaft Dia.

d

(in. )

Dimensions (in.)(mm)

A NZBSTGIE

BoltUsed

(in.)

Weight(lbs.)

HousingNo.

BearingNo.

Bi K

SAMS 204-12G 3/439/16

90.55/16 MS 204G 0.9

SAMS 201-8G202-10G

1/25/8

33/16

811/4 MS 203G 0.7

SAMS 205-14G205-16G

7/8

133/4

955/16 MS 205G 1.1

0.29537.5

117/64

32.125/8

66.711/32

8.711/32

8.743/64

17.111/32

8.6213/16

71.5

0.23626.0

13/16

30.025/16

58.79/32

7.19/32

7.137/64

14.719/64

7.421/2

63.5

0.29537.5

119/64

33.0251/64

7111/32

8.711/32

8.711/16

17.53/8

9.53

76.2

SA 204-12G

SA 201-8G202-10G

SA 205-14G205-16G

0.35439.0

129/64

37.035/16

84.113/32

10.313/32

10.313/16

20.613/32

10.339/16

90.5SAMS 206-18G

206-19G206-20G

11/8

13/16

11/4S47/16

113SA 206-18G

206-19G206-20G

3/8 MS 206G 1.8

0.37409.5

119/32

40.5311/16

93.713/32

10.37/16

11.17/8

22.27/16

11.1315/16

100.0SAMS 207-20G

207-22G207-23G

11/4

13/8

17/16

415/16

125.4SA 207-20G

207-22G207-23G

3/8 MS 207G 2.3

1.220531.0

1.126028.6

1.220531.0

1.405535.7

1.531538.9

15/16

33

11/8

29

11/2

38

13/4

45

23/16

60

UCFLX

SAMS

K-type Seal

• Cast iron housing• K-type seals• Narrow inner race bearing• Metric sizes available

2-SB

E A

ZG

T

BiNK

I

28

STA

ND

ARD

PRO

DU

CTS

• Ductile iron housing• Square bolt holes• K-type seals

• Narrow inner race bearing• Also available non-relubricatable

— please specifyK-type Seal

SBLF H4 & SALF H4 Flange Units

SALF H4 Eccentric locking collar type

SBLF H4 Set screw type

UnitNo.

Shaft Dia.

d

(in. ) (mm)

Dimensions (in.)(mm)

A NZBSLGIE

BoltUsed

(in.)

Weight(lbs.)

HousingNo.

BearingNo.

Bi

UnitNo.

Shaft Dia.

d

(in. ) (mm)

Dimensions (in.)(mm)

A NZBSLGIE

BoltUsed

(in.)

Weight(lbs.)

HousingNo.

BearingNo.

Bi K

0.27567.0

15/32

29.0213/32

6125/64

1025/32

207/16

117/16

11213/16

71.5SBLF 204-12GH4

204GH43/4

20317/32

905/16 LF 204 H4 0.7SB 204-12G

204G0.9843

25.0

0.29537.5

13/16

30.5217/32

6425/64

1025/32

207/16

117/16

11263/64

76.0

SBLF 205-14GH4205GH4205-15GH4205-16GH4

7/8

15/16

1

25 33/4

955/16 LF 205 H4 0.9

SB 205-14G205G205-15G205-16G

1.063027.0

0.31508.0

111/32

34.0376

15/32

127/8

2315/32

1215/32

1239/16

90.5

SBLF 206-17GH4206-18GH4206GH4206-19GH4206-20GH4

11/16

11/8

13/16

11/4S

30 47/16

1133/8 LF 206 H4 1.2

SB 206-17G206-18G206G206-19G206-20G

1.181130.0

0.37409.5

17/16

36.531/2

8915/32

1215/16

2433/64

1333/64

13315/16

100.0

SBLF 207-20GH4207-21GH4207-22GH4207GH4207-23GH4

11/4

15/16

13/8

17/16

35413/16

1223/8 LF 207 H4 1.7

SB 207-20G207-21G207-22G207G207-23G

1.299233.0

0.23626.0

125.4

27/32

565/16

823/32

183/8

103/8

1021/2

63.5

SBLF 201-8GH4202GH4202-10GH4203GH4

1/2

5/8

15

17

33/16

811/4 LF 203 H4 0.6

SB 201-8G202G202-10G203G

0.866122.0

SALF 204-12GH4204GH4

3/4 317/32

905/16 LF 204 H4 0.8

SALF 201-8GH4202GH4202-10GH4203GH4

1/2

5/8

33/16

811/4 LF 203 H4 0.7

SALF 205-14GH4205GH4205-15GH4205-16GH4

7/8

15/16

1

33/4

955/16 LF 205 H4 1.0

20

15

17

25

0.29537.5

123/64

34.4213/32

6125/64

1025/32

207/16

117/16

11213/16

71.5

0.23626.0

11/4

31.827/32

565/16

823/32

183/8

103/8

1021/2

63.5

0.29537.5

123/64

34.4217/32

6425/64

1025/32

207/16

117/16

11263/64

76.0

SA 204-12G204G

SA 201-8G202G202-10G203G

SA 205-14G205G205-15G205-16G

0.35439.0

117/32

38.9376

15/32

127/8

2315/32

1215/32

1239/16

90.5

SALF 206-17GH4206-18GH4206GH4206-19GH4206-20GH4

11/16

11/8

13/16

11/4S

30 47/16

113

SA 206-17G206-18G206G206-19G206-20G

3/8 LF 206 H4 1.4

0.37409.5

111/16

42.731/2

8915/32

1215/16

2433/64

1333/64

13315/16

100.0

SALF 207-20GH4207-21GH4207-22GH4207GH4207-23GH4

11/4

15/16

13/8

17/16

35413/16

122

SA 207-20G207-21G207-22G207G207-23G

3/8 LF 207 H4 2.0

1.220531.0

1.126028.6

1.220531.0

1.405535.7

1.531538.9

15/16

33

11/8

29

11/2

38

13/4

45

23/16

60

G=Relubricatable Specify “N” for non-relubricatable units Interchange Page 91

29

STAN

DA

RD PRO

DU

CTS

• Cast iron housing• Round bolt holes• K-type seals

• Narrow inner race bearing• Also available non-relubricatable

— please specifyK-type Seal

SBLF & SALF 2-Bolt Flange Units

SBLF Set screw type

UnitNo.

Shaft Dia.

d

(in. ) (mm)

Dimensions (in.)(mm)

A NZBSLGIE

BoltUsed

(in.)

Weight(lbs.)

HousingNo.

BearingNo.

Bi

UnitNo.

Shaft Dia.

d

(in. ) (mm)

Dimensions (in.)(mm)

A NZBSLGIE

BoltUsed

(in.)

Weight(lbs.)

HousingNo.

BearingNo.

Bi K

SALF Eccentric locking collar type

0.27567.0

15/32

29.0213/32

6125/64

1025/32

207/16

117/16

11213/16

71.5SBLF 204-12G

204G3/4

20317/32

905/16 LF 204G 0.7SB 204-12G

204G0.9843

25.0

0.29537.5

13/16

30.5217/32

6425/64

1025/32

207/16

117/16

11263/64

76.0

SBLF 205-14G205G205-15G205-16G

7/8

15/16

1

25 33/4

955/16 LF 205G 0.9

SB 205-14G205G205-15G205-16G

1.063027.0

0.31508.0

111/32

34.0376

15/32

127/8

2315/32

1215/32

1239/16

90.5

SBLF 206-17G206-18G206G206-19G206-20G

11/16

11/8

13/16

11/4S

30 47/16

1133/8 LF 206G 1.2

SB 206-17G206-18G206G206-19G206-20G

1.181130.0

0.37409.5

17/16

36.531/2

8915/32

1215/16

2433/64

1333/64

13315/16

100.0

SBLF 207-20G207-21G207-22G207G207-23G

11/4

15/16

13/8

17/16

35413/16

1223/8 LF 207G 1.7

SB 207-20G207-21G207-22G207G207-23G

1.299233.0

0.23626.0

125.4

27/32

565/16

823/32

183/8

103/8

1021/2

63.5

SBLF 201-8G202G202-10G203G

1/2

5/8

15

17

33/16

811/4 LF 203G 0.6

SB 201-8G202G202-10G203G

0.866122.0

SALF 204-12G204G

3/4 317/32

905/16 LF 204G 0.8

SALF 201-8G202G202-10G203G

1/2

5/8

33/16

811/4 LF 203G 0.7

SALF 205-14G205G205-15G205-16G

7/8

15/16

1

33/4

955/16 LF 205G 1.0

20

15

17

25

0.29537.5

123/64

34.4213/32

6125/64

1025/32

207/16

117/16

11213/16

71.5

0.23626.0

11/4

31.827/32

565/16

823/32

183/8

103/8

1021/2

63.5

0.29537.5

123/64

34.4217/32

6425/64

1025/32

207/16

117/16

11263/64

76.0

SA 204-12G204G

SA 201-8G202G202-10G203G

SA 205-14G205G205-15G205-16G

0.35439.0

117/32

38.9376

15/32

127/8

2315/32

1215/32

1239/16

90.5

SALF 206-17G206-18G206G206-19G206-20G

11/16

11/8

13/16

11/4S

30 47/16

113

SA 206-17G206-18G206G206-19G206-20G

3/8 LF 206G 1.4

0.37409.5

111/16

42.731/2

8915/32

1215/16

2433/64

1333/64

13315/16

100.0

SALF 207-20G207-21G207-22G207G207-23G

11/4

15/16

13/8

17/16

35413/16

122

SA 207-20G207-21G207-22G207G207-23G

3/8 LF 207G 2.0

1.220531.0

1.126028.6

1.220531.0

1.405535.7

1.531538.9

15/16

33

11/8

29

11/2

38

13/4

45

23/16

60

G=Relubricatable Specify “N” for non-relubricatable units

30

STA

ND

ARD

PRO

DU

CTS

B-type Seal L3-type Seal

Standard duty with set screw lock.• Cast iron housing• Wide inner race bearing

• B-type sealsL3-type seals available in some sizes

UCFB 3-Bolt Flange Bracket Units

UnitNo.

Shaft Dia.

d

(in. ) (mm)

Dimensions (in.)(mm)

W ZJHGSLDB

BoltUsed

(in.)

Weight(lbs.)

HousingNo.

BearingNo.

E Bi N MI

UCFB 201201-8202202-10203204-12204

1/2

5/8

3/4

41/4

10821/2

6423/8

60125

25/64

9.95/16

8111/16

43.37/8

22.215/16

33.35/16 FB 204 1.5

UCFB 205-14205-15205205-16

7/815/16

1

43/4

1215/16 FB 205 1.5

UCFB 206-17206-18206206-19206-20

11/16

11/8

13/16

11/4S

53/8

1375/16 FB 206 2.0

UCFB 207-20207-21207-22207207-23

11/4

15/16

13/8

17/16

61/8

1567/16 FB 207 2.9

UCFB 208-24208-25208

11/2

19/16615/32

1643/8 FB 208 4.0

UCFB 209-26209-27209-28209

15/8

111/16

13/4

627/32

1743/8 FB 209 4.4

12

15

17

20

25

30

35

40

45

113/32

35.711/8

28.6113/16

46.03/8

9.525/64

9.911/8

2921/2

6423/4

70

137/64

40.211/4

31.821/16

52.43/8

9.525/64

9.911/4

3223/4

7031/4

83

13/4

44.411/4

31.823/8

60.31/2

1333/64

13.117/16

3731/4

8333/4

95

21/64

51.2139/64

41223/64

605/8

167/16

11.1111/32

3431/16

78315/16

100

21/16

52.2111/16

42.929/16

6523/32

1815/32

11.9111/32

3435/32

8043/16

106

UC 201201-8202202-10203204-12204

UC 205-14205-15205205-16

UC 206-17206-18206206-19206-20

UC 207-20207-21207-22207207-23

UC 208-24208-25208

UC 209-26209-27209-28209

25/32

54.615/8

41.3215/16

74.61/2

1333/64

13.111/2

384

10245/8

118

UCFB 210-30210-31210210-32

17/8

115/16

2S50

71/2

191

UC 210-30210-31210210-32

7/16 FB 210 5.1

15/8

41.3

11/2

38.1

17/8

47.6

250.8

131/32

50.0

21/8

54.0

23/4

69.9

1.338634.0

1.220531.0

1.689042.9

1.500038.1

1.937049.2

1.937049.2

2.031551.6

0.563014.3

0.500012.7

0.689017.5

0.626015.9

0.748019.0

0.748019.0

0.748019.0

0.775619.7

0.720518.3

1.000025.4

0.874022.2

1.189030.2

1.189030.2

1.283532.6

43/64

17

5/8

16

3/4

19

53/64

21

53/64

21

53/64

21

53/64

21

Interchange Page 91

31

STAN

DA

RD PRO

DU

CTS

B-type Seal L3-type Seal

Standard duty with set screw lock.• Cast iron housing• Wide inner race bearing• Available with eccentric

locking collar bearing

• B-type sealsL3-type seals available in some sizes

UCHA Hanger Units

UnitNo.

Shaft Dia.

d

(in. ) (mm)

Dimensions (in.)(mm)

A MKDLHCW

Weight(lbs.)

HousingNo.

BearingNo.

Bi N

0.720518.3

PF 3/4

-14 3/4

19.119/16

40233/64

640325/32

96

UCHA 201201-8202202-10203204-12204

1/2

5/8

3/4

12

15

17

20

233/64

64 HA 204 1.71.220531.0

0.874022.2

PF 3/4

-143/4

19.119/16

40233/64

64043/32

104

UCHA 206-17206-18206206-19206-20

11/16

11/8

13/16

11/4S

30 35/32

80 HA 206 1.91.500038.1

0.775619.7

PF 3/4

-143/4

19.119/16

40233/64

64041/16

103

UCHA 205-14205-15205205-16

7/815/16

125

31/16

78 HA 205 1.91.338634.0

13.2

1.189030.2

PF 1-111/2

13/16

2117/8

48315/64

8213/64

5511/32

136

UCHA 209-26209-27209-28209

15/8

111/16

13/4

45

41/4

108 HA 209 3.91.937049.2

1.189030.2

PF 3/4

-143/4

19.119/16

4027/8

735/64

2427/32

123UCHA 208-24

208-25208

11/2

19/16

40315/16

100 HA 208 3.41.937049.2

1.752044.5

PF 11/2

-111/2

11/4

3223/4

70439/64

1173/8

9.577/8

200UCHA 215-47

215215-48

215/16

375 617/32

166 HA 215 12.2UC 215-47

215215-48

3.063077.8

0.626015.9

0.563014.3

0.500012.7

0.748019.0

0.748019.0

1.311033.3

0.689017.5

1.000025.4

PF 3/4

-143/4

19.119/16

4023/4

70049/16

116

UCHA 207-20207-21207-22207207-23

11/4

15/16

13/8

17/16

3535/8

92 HA 207 2.61.689042.9

0.748019.0

1.283532.6

PF 1-111/2

13/16

2117/8

48317/64

8313/64

5519/32

142

UCHA 210-30210-31210210-32

17/8

115/16

2S50

421/32

118 HA 210 4.62.031551.6

1.000025.4

1.563039.7

PF 11/4

-111/2

13/32

2823/8

6041/64

10223/64

9613/16

173UCHA 211-34

211211-35

21/8

23/16

55 519/32

142 HA 212 8.52.563065.1

1.000025.4

1.563039.7

PF 11/4

-111/2

13/32

2823/8

6041/64

10223/64

9613/16

173

UCHA 212-36212212-38212-39

21/4

23/8

27/16

60 519/32

142 HA 212 8.2UC 212-36

212212-38212-39

2.563065.1

1.311033.3

1.752044.5

PF 11/2

-111/2

11/4

3223/4

70439/64

1173/8

9.577/8

200UCHA 214-43

214211/16

70617/32

166 HA 215UC X14-43X14

3.063077.8

Interchange Page 91

UC X11-34X11X11-35

UC 201201-8202202-10203204-12204

UC 205-14205-15205205-16

UC 206-17206-18206206-19206-20

UC 207-20207-21207-22207207-23

UC 208-24208-25208

UC 209-26209-27209-28209

UC 210-30210-31210210-32

32

STA

ND

ARD

PRO

DU

CTS

Standard duty with set screw lock.• Cast iron housing• Wide inner race bearing

• B-type sealsL3-type seals available in some sizes B-type Seal L3-type Seal

UCFCS 4-Bolt Piloted Flange Units

UnitNo.

Shaft Dia.

d

(in. ) (mm)

Dimensions (in.)(mm)

A BiIFGKJSP

BoltUsed

(in.)

Weight(lbs.)

HousingNo.

BearingNo.

Z MN

1.937049.2

23/64

93.625*92.1

11/32

26.07/16

11.07/16

11.015/32

12.043/8*111

UCFCS 209-26209-27209-28209

15/8

111/16

13/4

45

51/4

133

UC 209-26209-27209-28209

3/8 FC X08 4.4117/32

39.21.1890

30.20.7480

19.0

1.500038.1

25/64

103.00076.2

15/16

24.03/8

9.515/64

6.03/8

9.535/8

92

UCFCS 206-17206-18206206-19206-20

11/16

11/8

13/16

11/4S

30 43/8

1115/16 FC X05 2.6

UC 206-17206-18206206-19206-20

19/32

32.20.8740

22.20.6260

15.9

1.689042.9

5/16

83.37585.7

7/8

22.53/8

9.53/8

9.515/32

12.041/8

104.8

UCFCS 207-20207-21207-22207207-23

11/4

15/16

13/8

17/16

355

1273/8 FC X06 3.3

UC 207-20207-21207-22207207-23

15/16

33.41.0000

25.40.6890

17.5

2.563065.1

5/32

45.000127.0

11/32

26.01/2

13.055/64

22.05/8

16.06

152.4

UCFCS 212-36212212-38212-39

21/4

23/8

27/16

60 73/32

1801/2 FC X11 9.5

UC 212-36212212-38212-39

123/32

43.71.5630

39.71.0000

25.4

2.189055.6

9/32

74.500114.3

125.0

7/16

11.05/8

16.035/64

14.053/8

136.5UCFCS 211-32

211211-35

2

23/16

55 63/8

1627/16 FC X10 7.0

UC 211-32211211-35

119/32

40.41.3150

33.40.8740

22.2

2.031551.6

5/16

84.250108.0

125.0

7/16

11.015/32

12.035/64

14.051/8

130

UCFCS 210-30210-31210210-32

17/8

115/16

2S50

63/32

1557/16 FC X09 5.7

UC 210-30210-31210210-32

119/32

40.61.2835

32.60.7480

19.0

1.937049.2

23/64

93.62592.1

11/32

26.07/16

11.07/16

11.015/32

12.043/8

111UCFCS 208-24

208-25208

11/2

19/16

4051/4

1333/8 FC X07 4.2

UC 208-24208-25208

117/32

39.21.1890

30.20.7480

19.0

2.937074.6

7/16

115.500139.7

15/16

33.09/16

14.025/32

20.05/8

16.061/2

165UCFCS 214-43

214211/16

7075/8

194UC 214-43

2141/2 FC X13 12.523/16

55.41.7480

44.41.1890

30.2

2.563065.1

7/16

115.500139.7

15/16

33.09/16

14.025/32

20.05/8

16.061/2

165UCFCS 213-40

21321/2

6575/8

1941/2 FC X12 11.7UC 213-40

2132

50.71.5630

39.71.0000

25.4

* Also available in FCF(209) style housing where P=51/8, F=4.250. See page 37.

33

STAN

DA

RD PRO

DU

CTS

B-type Seal L3-type Seal

UCFCF 4-Bolt Piloted Flange UnitsStandard duty with set screw lock.• Cast iron housing• Wide inner race bearing• Available with eccentric

locking collar bearing

• B-type sealsL3-type seals available in some sizes

UnitNo.

Shaft Dia.

d

(in. ) (mm)

Dimensions (in.)(mm)

A BiIFGKJSP

BoltUsed

(in.)

Weight(lbs.)

HousingNo.

BearingNo.

Z MN

UCFCF 211-32211-34211211-35

221/8

23/16

71/8

1811/2 FCF 211 9.155

2.189055.6

7/32

5.55.000

127.07/8

221/2

127/8

2219/32

15.16

152.4

UC 211-32211-34211211-35

1.937049.2

3/8

9.53.625

92.111/32

261/2

1215/32

1215/32

11.943/8

111.1UCFCF 208-24

208-25208

11/2

19/16

4051/4

133UC 208-24

208-25208

3/8 FCF 208 4.6

117/32

38.9

19/16

39.7

1.315033.4

1.189030.2

0.874022.2

0.748019.0

1.338634.0

7/16

113.000

76.255/64

223/8

101/4

613/32

10.335/8

92.1

UCFCF 205-14205-15205205-16

7/815/16

125

43/8

1115/16 FCF 205 2.6

UC 205-14205-15205205-16

17/32

31.00.7756

19.70.5630

14.3

1.500038.1

19/64

7.53.375

85.725/32

203/8

1027/64

1115/32

11.941/8

104.8

UCFCF 206-17206-18206206-19206-20

11/16

11/8

13/16

11/4S

30 5127

3/8 FCF 206 3.9

UC 206-17206-18206206-19206-20

111/64

29.80.8740

22.20.6260

15.9

1.937049.2

7/32

5.54.250

108.07/8

2229/64

1215/32

1217/32

13.551/8

130.2

UCFCF 209-26209-27209-28209

15/8

111/16

13/4

45

61/8

1567/16 FCF 209 6.2

UC 209-26209-27209-28209

113/32

35.71.1890

30.20.7480

19.0

1.689049.9

9/32

73.625

92.17/8

221/2

1215/32

1215/32

11.943/8

111.1

UCFCF 207-20207-21207-22207207-23

11/4

15/16

13/8

17/16

3551/4

1333/8 FCF 207 4.2

UC 207-20207-21207-22207207-23

19/32

32.51.0000

25.40.6890

17.5

2.031551.6

11/32

94.500

114.311/16

271/2

125/8

1617/32

13.553/8

136.5

UCFCF 210-30210-31210210-32

17/8

115/16

2S50

63/8

1627/16 FCF 210 7.0

UC 210-30210-31210210-32

15/8

41.31.2835

32.60.7480

19.0

Interchange Page 91

34

STA

ND

ARD

PRO

DU

CTS

B-type Seal L3-type Seal

UCFCX 4-Bolt Piloted Flange UnitsMedium duty with set screw lock.• Wide inner race bearing with

greater load carrying capacitythan standard duty

• B-type sealsL3-type seals available in some sizes

UnitNo.

Shaft Dia.

d

(in. ) (mm)

Dimensions (in.)(mm)

A BiIFGKJSP

BoltUsed

(in.)

Weight(lbs.)

HousingNo.

BearingNo.

Z MN

UCFC X15-47X15X15-48

215/16

383/4

2225/8 FC X15 17.675 3.2520

82.615/32

126.375161.9

13/8

35.05/8

16.055/64

22.03/4

19.071/2

190.5UC X15-47

X15X15-48

1.937049.2

23/64

93.62592.1

11/32

26.07/16

11.07/16

11.015/32

12.043/8

111UCFC X08-24

X0811/2

4051/4

133UC X08-24

X083/8 FC X08 4.4

213/32

61.3

117/32

39.2

1.941049.3

1.189030.2

1.311033.3

0.748019.0

1.500038.1

25/64

103.00076.2

15/16

24.03/8

9.515/64

6.03/8

9.535/8

92

UCFC X05-14X05-15X05X05-16

7/815/16

125

43/8

1115/16 FC X05 2.6

UC X05-14X05-15X05X05-16

19/32

32.20.8740

22.20.6260

15.9

1.689042.9

5/16

83.37585.7

7/8

22.53/8

9.53/8

9.515/32

12.041/8

104.8

UCFC X06-18X06X06-19X06-20

11/8

13/16

11/4

30 5127

3/8 FC X06 3.3UC X06-18

X06X06-19207-20

15/16

33.41.0000

25.40.6890

17.5

2.563065.1

5/32

45.000127.0

11/32

26.01/2

13.055/64

22.05/8

16.06

152.4

UCFC X11-34X11X11-35X11-36

21/8

23/16

21/4

55 73/32

1801/2 FC X11 9.5

UC X11-34X11X11-35212-36

123/32

43.71.5630

39.71.0000

25.4

2.189055.6

9/32

74.500114.3

125.0

7/16

11.05/8

16.035/64

14.053/8

136.5

UCFC X10-30X10-31X10X10-32

17/8

115/16

250

63/8

1627/16 FC X10 7.0

UC X10-30X10-31X10211-32

119/32

40.41.3150

33.40.8740

22.2

2.031551.6

5/16

84.250108.0

125.0

7/16

11.015/32

12.035/64

14.051/8

130

UCFC X09-26X09-27X09-28X09

15/8

111/16

13/4

45

63/32

1557/16 FC X09 5.7

UC X09-26X09-27X09-28X09

119/32

40.61.2835

32.60.7480

19.0

1.937049.2

23/64

93.62592.1

11/32

26.07/16

11.07/16

11.015/32

12.043/8

111UCFC X07-22

X07X07-23

13/8

17/16

35 51/4

1333/8 FC X07 4.2

UC X07-22X07X07-23

117/32

39.21.1890

30.20.7480

19.0

2.937074.6

7/16

115.500139.7

15/16

33.09/16

14.025/32

20.05/8

16.061/2

165UCFC X13-40

X1321/2

6575/8

194UC X13-40

X131/2 FC X13 12.523/16

55.41.7480

44.41.1890

30.2

2.563065.1

7/16

115.500139.7

15/16

33.09/16

14.025/32

20.05/8

16.061/2

165UCFC X12

X12-38X12-39

23/8

27/16

60 75/8

1941/2 FC X12 11.7

UC X12X12-38X12-39

250.7

1.563039.7

1.000025.4

Interchange Page 91

UCFC X17X17-55X17-56

37/16

31/2

101/4

2603/4 FC X17 28.4

85 3.779596.0

25/64

107.375187.3

113/32

36.03/4

19.063/64

25.029/32

23.085/8

219UC X17

X17-55218-56

25/8

66.32.2165

56.31.5630

39.7

UCFC X20X20-63X20-64

315/16

4107/8

2763/4 FC X20 40.0

100 4.6260117.5

55/64

228.125206.4

219/32

66.07/8

22.017/64

28.029/32

23.093/8

238UC X20

X20-63X20-64

39/16

90.32.6890

68.31.9370

49.2

35

STAN

DA

RD PRO

DU

CTS

B-type Seal L3-type Seal

UCFC 4-Bolt Piloted Flange UnitsStandard duty with set screw lock.

UnitNo.

Shaft Dia.

d

(in. ) (mm)

Dimensions (in.)(mm)

A BiIFGKJSP (mm)

Weight(lbs.)

HousingNo.

BearingNo.

Z N M (in)

BoltUsed

UCFC 201201-8202202-10203204-12204

1/2

5/8

3/4

315/16

10035/64

7815/32

123/16

59/32

713/16

20.52.4409

62.025/64

101.2205

31.0 M10 FC 204 2.0

UCFC 213-40213

21/2 81/16

205 M16 FC 213 11.7

UCFC 205-14205-15205205-16

7/815/16

1

41/2

115 M10 FC 205 2.4

UCFC 206-17206-18206206-19206-20

11/16

11/8

13/16

11/4S

415/16

125 M10 FC 206 3.3

UCFC 207-20207-21207-22207207-23

11/4

15/16

13/8

17/16

55/16

135 M12 FC 207 3.7

UCFC 208-24208-25208

11/2

19/16511/16

145 M12 FC 208 4.6

UCFC 209-26209-27209-28209

15/8

111/16

13/4

65/16

160 M14 FC 209 6.6

12

15

17

20

65

25

30

35

40

45

2.563065.1

5/8

165.7087

145.0127/64

3619/32

1535/64

143/4

19611/16

170

1.338634.0

25/64

102.7559

70.013/16

219/32

715/64

615/32

12335/64

90

1.500038.1

25/64

103.1496

80.029/32

235/16

85/16

815/32

12315/16

100

1.689042.9

7/16

113.5433

90.011/32

2611/32

95/16

835/64

14421/64

110

1.937049.2

7/16

113.9370

100.011/32

2611/32

913/32

1035/64

14423/32

120

1.937049.2

25/64

104.1339

105.011/32

2635/64

1415/32

125/8

16513/64

132

UC 201201-8202202-10203204-12204

UC 213-40213

UC 205-14205-15205205-16

UC 206-17206-18206206-19206-20

UC 207-20207-21207-22207207-23

UC 208-24208-25208

UC 209-26209-27209-28209

2.031551.6

25/64

104.3307

110.013/32

2835/64

1415/32

125/8

1657/16

138

UCFC 210-30210-31210210-32

17/8

115/16

2S50

61/2

165

UC 210-30210-31210210-32

M14 FC 210 6.8

3.063077.8

45/64

186.2992

160.0137/64

4023/32

185/8

163/4

1971/4

184UCFC 215-47

215215-48

215/16

375 821/32

220UC 215-47

215215-48

M16 FC 215 16.3

23/16

55.7

111/64

29.7

17/64

28.3

117/64

32.2

17/16

36.4

15/8

41.2

137/64

40.2

143/64

42.6

215/32

62.5

1.000025.4

0.563014.3

0.500012.7

0.689017.5

0.626015.9

0.748019.0

0.748019.0

0.748019.0

1.311033.3

1.563039.7

0.775619.7

0.720518.3

1.000025.4

0.874022.2

1.189030.2

1.189030.2

1.283532.6

1.752044.5

11/16

_

_

1/2

_

1/2

9/16

9/16

11/16

2.937074.6

43/64

175.9055

150.0137/64

4023/32

1835/64

143/4

19631/32

177UCFC 214-43

214-44214

211/16

23/4

70815/32

215 M16 FC 214 15.0UC 214-43

214-44214

227/64

61.41.1890

30.21.7480

44.411/16

2.189055.6

1/2

134.9213

125.017/32

3119/32

1515/32

123/4

19529/32

150

UCFC 211-32211-34211211-35

221/8

23/16

5575/16

185

UC 211-32211-34211211-35

M16 FC 211 8.6153/64

46.40.8740

22.21.3150

33.411/16

2.563065.1

43/64

175.3150

135.0127/64

3619/32

1515/32

123/4

19619/64

160

UCFC 212-36212212-38212-39

21/4

23/8

27/16

60 711/16

195

UC 212-36212212-38212-39

M16 FC 212 9.7215/64

56.71.0000

25.41.5630

39.711/16

Interchange Page 91

36

STA

ND

ARD

PRO

DU

CTS

B-type Seal L3-type Seal

UCT Take Up UnitsWide slot, standard duty with setscrew lock.• Cast iron housing• Wide inner race bearing• Available with high temp.

bearing - See page 46

• B-type sealsL3-type seals available in some sizes

UnitNo.

Shaft Dia.

d

(in. ) (mm)

Dimensions (in.)(mm)

O JEkBSQPG

Weight(lbs.)

HousingNo.

BearingNo.

A Bi N MW L R H

UCT 201201-8202202-10203204-12204

1/2

5/8

3/4

5/8

16 T 204 1.7

UCT 208-24208-25208

11/2

19/163/4

19 T 208 5.5

UCT 209-26209-27209-28209

15/8

111/16

13/4

3/4

19 T 209 5.5

12

15

17

20

40

45

11/4

323

76.217/32

13.5251

3/4

1911/4

32251

13/32

10

115/16

494

101.611/16

17.539/32

8319/64

29115/16

4939/32

835/8

16

115/16

494

101.611/16

17.539/32

8319/64

29115/16

4939/32

835/8

16

UC 201201-8202202-10203204-12204

UC 208-24208-25208

UC 209-26209-27209-28209

31/2

89

41/2

114

419/32

117

1.220531.0

1.937049.2

1.937049.2

0.500012.7

0.748019.0

0.748019.0

0.720518.3

1.189030.2

1.189030.2

311/16

94

521/32

144

521/32

144

13/16

21

15/16

33

13/8

35

15/16

33

27/32

56

21/4

57

213/32

61

315/32

88

37/16

87

115/32

3725/16

59115/16

494

101.611/16

17.5317/32

9033/8

8619/64

29115/16

4939/32

835/8

16

UCT 210-30210-31210210-32

17/8

115/16

2S50

3/4

19

UC 210-30210-31210210-32

T 210 5.7419/32

1172.0315

51.60.7480

19.01.2835

32.657/8

149

123/32

4437/16

8723/4

70515/16

150.811/16

27513/32

13743/4

121139/64

4123/4

7043/8

11113/16

21UCT 213-40

21321/2

6511/4

32UC 213-40

213 T 213 15.269/16

1672.5630

65.11.0000

25.41.5630

39.7813/16

224

15/16

2413/8

3511/4

323

76.217/32

13.5251

3/4

1911/4

32251

13/32

1027/16

62

UCT 205-14205-15205205-16

7/815/16

125

5/8

16 T 205 1.9UC 205-14

205-15205205-16

31/2

891.3386

34.00.5630

14.30.7756

19.7313/16

97

13/32

28111/16

43115/32

3731/2

88.917/32

13.521/4

5755/64

22115/32

3727/32

5613/32

1023/4

70

UCT 206-17206-18206206-19206-20

11/16

11/8

13/16

11/4S

305/8

16 T 206 2.9

UC 206-17206-18206206-19206-20

41/32

1021.5000

38.10.6260

15.90.8740

22.247/16

113

17/8

4835/8

9223/4

70515/16

150.811/16

2743/4

121139/64

4123/4

7043/8

11113/16

21UCT 215-47

215215-48

215/16

375 11/4

3251/2

140 T 215 15.9UC 215-47

215215-48

69/16

1673.0630

77.81.3110

33.31.7520

44.591/8

232

13/16

30251

115/32

3731/2

88.917/32

13.5217/32

6455/64

22115/32

37217/32

641/2

1331/16

78

UCT 207-20207-21207-22207 207-23

11/4

15/16

13/8

17/16

35

5/8

16 T 207 3.5

UC 207-20207-21207-22207207-23

41/32

1021.6890

42.90.6890

17.51.0000

25.453/32

129

11/2

3829/16

65217/32

6451/8

130.211/16

2743/16

10633/4

9513/8

35217/32

6441/32

1023/4

19

UCT 211-32211-34211211-35

221/8

23/16

55125

UC 211-32211-34211211-35

T 211 8.853/4

1462.1890

55.60.8740

22.21.3150

33.4623/32

171

121/32

42215/16

75217/32

6451/8

130.211/16

27411/16

11941/32

10213/8

35217/32

6441/32

1023/4

19

UCT 212-36212212-38212-39

21/4

23/8

27/16

60 11/4

32

UC 212-36212212-38212-39

T 212 10.653/4

1462.5630

65.11.0000

25.41.5630

39.775/8

194

Interchange Page 91

37

STAN

DA

RD PRO

DU

CTS

B-type Seal L3-type Seal

Wide slot, standard duty with eccentriclocking collar.• Cast iron housing• Wide inner race bearing

• B-type sealsL3-type seals available in some sizes

NAT Take Up Units

UnitNo.

Shaft Dia.

d

(in. ) (mm)

Dimensions (in.)(mm)

O JEkBSQPG

Weight(lbs.)

HousingNo.

BearingNo.

A Bi N IW L R H M K

NAT 201201-8202202-10203204-12204

1/2

5/8

3/4

5/8

16 T 204 1.8

NAT 208-24208-25208

11/2

19/163/4

19 T 208 5.7

NAT 209-26209-27209-28209

15/8

111/16

13/4

3/4

19 T 209 5.7

12

15

17

20

40

45

11/4

323

76.217/32

13.5251

3/4

1911/4

32251

13/32

10

115/16

494

101.611/16

17.539/32

8319/64

29115/16

4939/32

835/8

16

115/16

494

101.611/16

17.539/32

8319/64

29115/16

4939/32

835/8

16

NA 201201-8202202-10203204-12204

NA 208-24208-25208

NA 209-26209-27209-28209

31/2

89

41/2

114

419/32

117

1.712643.5

2.216556.3

2.216556.3

0.669317.0

0.842521.4

0.842521.4

0.37409.5

0.531513.5

0.531513.5

311/16

94

521/32

144

521/32

144

13/16

21

15/16

33

13/8

35

15/16

33

27/32

56

21/4

57

213/32

61

315/32

88

37/16

87

115/32

3725/16

59115/16

494

101.611/16

17.5317/32

9033/8

8619/64

29115/16

4939/32

835/8

16

NAT 210-30210-31210210-32

17/8

115/16

2S50

3/4

19

NA 210-30210-31210210-32

T 210 6.1419/32

1172.468562.7

0.968524.6

0.531513.5

57/8

149

123/32

4437/16

8723/4

70515/16

150.811/16

27513/32

13743/4

121139/64

4123/4

7043/8

11113/16

21NAT 213-40

21321/2

6511/4

32NA 213-40

213 T 213 16.369/16

1673.374085.7

1.342534.1

0.689017.5

813/16

224

15/16

2413/8

3511/4

323

76.217/32

13.5251

3/4

1911/4

32251

13/32

1027/16

62

NAT 205-14205-15205205-16

7/815/16

125

5/8

16 T 205 2.0NA 205-14

205-15205205-16

31/2

891.744144.3

0.685017.4

0.37409.5

313/16

97

13/32

28111/16

43115/32

3731/2

88.917/32

13.521/4

5755/64

22115/32

3727/32

5613/32

1023/4

70

NAT 206-17206-18206206-19206-20

11/16

11/8

13/16

11/4S

305/8

16 T 206 3.1

NA 206-17206-18206206-19206-20

41/32

1021.901648.3

0.716518.2

0.468511.9

47/16

113

17/8

4835/8

9223/4

70515/16

150.811/16

2743/4

121139/64

4123/4

7043/8

11113/16

21NAT 215-47

215215-48

215/16

375 11/4

3251/2

140 T 215 17.3NA 215-47

215215-48

69/16

1673.626092.1

1.468537.3

0.689017.5

91/8

232

13/16

30251

115/32

3731/2

88.917/32

13.5217/32

6455/64

22115/32

37217/32

641/2

1331/16

78

NAT 207-20207-21207-22207207-23

11/4

15/16

13/8

17/16

35

5/8

16 T 207 4.0

NA 207-20207-21207-22207207-23

41/32

1022.011851.1

0.740218.8

0.531513.5

53/32

129

11/2

3829/16

65217/32

6451/8

130.211/16

2743/16

10633/4

9513/8

35217/32

6441/32

1023/4

19

NAT 211-32211-34211211-35

221/8

23/16

55125

NA 211-32211-34211211-35

T 211 9.253/4

1462.811071.4

1.090527.7

0.630016.0

623/32

171

121/32

42215/16

75217/32

6451/8

130.211/16

27411/16

11941/32

10213/8

35217/32

6441/32

1023/4

19

NAT 212-36212212-38212-39

21/4

23/8

27/16

60 11/4

32

NA 212-36212212-38212-39

T 212 11.353/4

1463.063077.8

1.216530.9

0.630016.0

75/8

194

0.685017.4

1.500038.1

0.716518.2

1.752044.5

0.968524.6

2.752069.9

1.342534.1

3.385886.0

0.669317.0

0.842521.4

0.842521.4

1.311033.3

2.374060.3

2.500063.5

1.468537.3

4.0157102.0

0.740218.8

2.189055.6

1.090527.7

3.000076.2

1.216530.9

3.315084.2

Interchange Page 91

38

STA

ND

ARD

PRO

DU

CTS

Narrow slot, standard duty with setscrew lock.• Cast iron housing• Wide inner race bearing

• B-type sealsL3-type seals available in some sizes

B-type Seal L3-type Seal

UCTRS Take Up Units

0.720518.3

UCTRS 201201-8202202-10203204-12204

1/2

5/8

3/4

12

15

17

20

7/8

22TRS 204 1.7

UC 201201-8202202-10203204-12204

1.220531.0

0.874022.2

UCTRS 206-17206-18206206-19206-20

11/16

11/8

13/16

11/4S

TRS 206 2.9

UC 206-17206-18206206-19206-20

1.500038.1

0.775619.7

UCTRS 205-14205-15205205-16

7/815/16

1TRS 205 1.9

UC 205-14205-15205205-16

1.338634.0

1.189030.2

UCTRS 208-24208-25208

11/2

19/16 TRS 208 5.5UC 208-24

208-25208

1.937049.2

0.626015.9

0.563014.3

0.500012.7

0.748019.0

0.689017.5

1.000025.4

UCTRS 207-20207-21207-22207207-23

11/4

15/16

13/8

17/16

TRS 207 3.5

UC 207-20207-21207-22207207-23

1.689042.9

UnitNo.

Shaft Dia.

d

(in. ) (mm)

Dimensions (in.)(mm)

I MFLEkBP

Weight(lbs.)

HousingNo.

BearingNo.

Bi NC S A W H

25

30

35

40

7/16

1113/8

353/4

19.111/2

381/4

6.425/8

66.731/8

79.431/2

893/4

195/16

823/16

56

7/8

227/16

1113/8

353/4

19.111/2

381/4

6.425/8

66.731/8

79.439/16

917/8

225/16

823/16

56

15/16

241/2

1313/8

357/8

22.221/2

64 5/16

7.9 31/2

88.941/8

10545/16

110 15/16

245/16

8211/16

68

15/16

241/2

1313/8

357/8

22.221/2

64 5/16

7.9 31/2

88.941/8

10541/2

114125

5/16

8211/16

68

15/32

2921/32

1715/8

4111/8

28.6376

5/16

7.94

101.643/4

12153/8

13713/16

303/8

9.531/4

83

39

STAN

DA

RD PRO

DU

CTS

Wide slot, medium duty with setscrew lock.• Wide inner race bearing

with greater load carrying capacity than standard duty

• Cast iron housing

• B-type sealsL3-type seals available in some sizes

B-type Seal L3-type Seal

UCTX Take Up Units

UnitNo.

Shaft Dia.

d

(in. ) (mm)

Dimensions (in.)(mm)

O JEKBSQPG

Weight(lbs.)

HousingNo.

BearingNo.

A Bi N MW L R H

Interchange Page 91

UCT X05-14X05-15X05X05-16

7/815/16

1

5/8

16 T 206 3.1

UCT X11-34X11X11-35X11-36

21/8

23/16

21/4

11/4

32 T 212 11.7

UCT X09-26X09-27X09-28X09

15/8

111/16

13/4

3/4

19 T 210 6.4

25

55

45

115/32

3731/2

88.917/32

13.521/4

5755/64

22115/32

3727/32

5613/32

10

217/32

6451/8

130.211/16

2741/32

10213/8

35217/32

6441/32

1023/4

19

115/16

494

101.611/16

17.533/8

8619/64

29115/16

4939/32

835/8

16

UC X05-14X05-15X05X05-16

UC X11-34X11X11-35212-36

UC X09-26X09-27X09-28X09

41/32

102

53/4

146

419/32

117

1.500038.1

2.563065.1

2.031551.6

0.626015.9

1.000025.4

0.748019.0

0.874022.2

1.563039.7

1.283532.6

47/16

113

75/8

194

57/8

149

13/32

28

121/32

42

115/32

37

111/16

43

215/16

75

25/16

59

23/4

70

411/16

119

317/32

90

11/2

3829/16

65217/32

6451/8

130.211/16

2743/16

10633/4

9513/8

35217/32

6441/32

1023/4

19

UCT X10-30X10-31X10X10-32

17/8

115/16

250

125

UC X10-30X10-31X10211-32

T 211 9.753/4

1462.1890

55.60.8740

22.21.3150

33.4623/32

171

13/8

3521/4

57115/16

494

101.611/16

17.537/16

8739/32

8319/64

29115/16

4939/32

835/8

16UCT X08-24

X0811/2

403/4

19UC X08-24

X08 T 209 6.1419/32

1171.9370

49.20.7480

19.01.1890

30.2521/32

144

17/8

4835/8

9223/4

70515/16

150.811/16

2751/2

14043/4

121139/64

4123/4

7043/8

11113/16

21UCT X14-43

X14-44X14

211/16

23/4

7011/4

32UC X14-43

X14-44X14

T 215 17.469/16

1673.0630

77.81.3110

33.31.7520

44.591/8

232

13/16

30251

115/32

3731/2

88.917/32

13.5217/32

6455/64

22115/32

37217/32

641/2

1331/16

78

UCT X06-18X06X06-19X06-20

11/8

13/16

11/4

30 5/8

16 T 207 3.7UC X06-18

X06X06-19207-20

41/32

1021.6890

42.90.6890

17.51.0000

25.453/32

129

UCT X07-22X07X07-23

13/8

17/16

35 T 208 5.9

123/32

4437/16

8723/4

70515/16

150.811/16

2743/4

121139/64

4123/4

7043/8

11113/16

21UCT X12

X12-38X12-39

23/8

27/16

60 11/4

32513/32

137 T 213 16.3UC X12

X12-38X12-39

69/16

1672.5630

65.11.0000

25.41.5630

39.7813/16

224

113/16

4637/16

8723/4

70515/16

150.811/16

27513/32

13743/4

121139/64

4123/4

7043/8

11113/16

21UCT X13-40

X1321/2

6511/4

32UC X13-40

X13 T 214 16.769/16

1672.9370

74.61.1890

30.21.7480

44.4813/16

224

251

33/4

9523/4

7061/2

16511/16

2751/2

14043/4

121139/64

4123/4

7043/8

11113/16

21UCT X15-47

X15X15-48

215/16

375 11/4

32UC X15-47

X15X15-48

TX15 19.171/4

1843.2520

82.61.3110

33.31.9410

49.391/4

235

21/8

54327/32

9827/8

73613/16

17313/32

2863/8

16263/16

157157/64

4827/8

7347/8

12413/32

28UCT X17

X17-55X17-56

37/16

31/2

85 11/2

38UC X17

X17-55X17-56

TX17 25.7725/32

1983.7795

96.01.5630

39.72.2165

56.3101/4

260

3/4

195/8

1639/32

83115/16

4919/64

2939/32

8311/16

17.54

101.641/2

114521/32

144115/16

4915/16

3327/32

56315/32

881.9370

49.20.7480

19.01.1890

30.2UC X07-22

X07X07-23

40

STA

ND

ARD

PRO

DU

CTS

UC & UCW Bearing InsertsStandard duty with set screw lock.• Wide inner race • B-type or L3-type seals

BearingNo.

Bore Dia.of Bearing

d

(in. ) (mm)

Dimensions (in.)(mm)

D GMNBeBi

Weight(lbs.)

BasicStaticLoad

Rating(lbs.)

BasicLoad

Rating(lbs.)

Ds (in.)

0.35439.0

1.283532.6

0.748019.0

0.944924.0

2.031551.6

UC 210-30210-31210210-32

17/8

115/16

2S50

3.543390.0 4,910

1.921.811.761.66

7,4003/8-24UNF

0.19695.0

0.720518.3

0.500012.7

0.629916.0

1.220531.0

UC 201201-8202202-10203204-12204

1/2

5/8

3/4

12

15

17

20

1.850447.0 1,600

0.460.460.420.420.400.350.35

2,7401/4-28UNF

0.35439.0

1.315033.4

0.874022.2

0.984325.0

2.189055.6

UC 211-32211-34211211-35

221/8

23/16

553.9370100.0 6,440

2.782.542.452.40

9,4903/8-24UNF

0.31508.0

1.189030.2

0.748019.0

0.826821.0

1.937049.2

UC 208-24208-25208

11/2

19/16

403.149680.0 3,960

1.501.431.41

6,3755/16-24UNF

0.15754.0

0.629916.0

0.393710.0

0.590615.0

1.023626.0

UCW 201201-8202202-10203

1/2

5/8

12

15

17

1.574840.0 1,020

0.260.260.240.240.22

2,04010-32UNF

0.472412.0

1.748044.4

1.189030.2

1.181130.0

2.937074.6

UC 214-43214-44214

211/16

704.9210125.0 9,620

4.604.544.52

13,5301/2-20UNF

0.21655.5

0.775619.7

0.563014.3

0.669317.0

1.338634.0

UC 205-14205-15205205-16

7/815/16

125

2.047252.0 1,750

0.510.460.440.44

3,0101/4-28UNF

0.413410.5

1.563039.7

1.000025.4

1.063027.0

2.563065.1

UC 212-36212212-38212-39

21/4

23/8

27/16

60 4.3307110.0 7,940

3.683.403.343.20

11,5003/8-24UNF

0.472412.0

1.563039.7

1.000025.4

1.102428.0

2.563065.1

UC 213-40213

21/2

654.7244120.0 8,760 4.28

4.1012,4001/2-20UNF

0.472412.0

1.752044.5

1.311033.3

1.259832.0

3.063077.8

UC 215-47215215-48

215/16

375 5.1181

130.0 10,5405.024.874.67

14,6201/2-20UNF

0.31508.0

1.189030.2

0.748019.0

0.866122.0

1.937049.2

UC 209-26209-27209-28209

15/8

111/16

13/4

45

3.346585.0 4,460

1.721.631.541.50

7,1105/16-24UNF

0.23626.0

0.874022.2

0.626015.9

0.748019.0

1.500038.1

UC 206-17206-18206206-19206-20

11/16

11/8

13/16

11/4S

30 2.440962.0 2,430

0.810.750.710.710.71

4,2001/4-28UNF

0.25596.5

1.000025.4

0.689017.5

0.787420.0

1.689042.9

UC 207-20207-21207-22207207-23

11/4

15/16

13/8

17/16

352.834672.0 3,340

1.191.121.061.060.99

5,5355/16-24UNF

0.551214

1.941049.3

1.311033.3

1.299233

3.252082.6UC 216 80 5.5118

140 11,700 6.1516,0001/2-20UNF

0.590615.0

2.216556.3

1.563039.7

1.496138.0

3.779596.0

UC 218-56218

31/2

906.2992160.0 15,700 9.83

9.5921,1201/2-20UNF

B-type Seal L3-type Seal

23/4

41

STAN

DA

RD PRO

DU

CTS

Standard duty with eccentric locking collar.• Wide inner race • B-type or L3-type seals

B-type Seal L3-type Seal

NA & NAW Bearing Inserts

BearingNo.

Bore Dia.of Bearing

d

(in. ) (mm)

Dimensions (in.)(mm)

D IMNBeBi

Weight(lbs.)

BasicStaticLoad

Rating(lbs.)

BasicLoad

Rating(lbs.)

G DsHK

0.37409.5

0.685017.4

0.685017.4

0.669317.0

1.744144.3

NA 205-14205-15205205-16

7/815/16

125

2.047252.0 1,750

0.640.600.550.55

3,0100.18904.8

0.531513.5

0.842521.4

0.842521.4

0.866122.0

2.216556.3

NA 209-26209-27209-28209

15/8

111/16

13/4

45

3.346585.0 4,460

2.222.011.921.87

7,1100.26776.8

0.531513.5

0.842521.4

0.842521.4

0.826821.0

2.216556.3

NA 208-24208-25208

11/2

19/16

403.149680.0 3,960

1.831.771.72

6,3750.26776.8

0.37409.5

0.547213.9

0.547213.9

0.590615.0

1.468537.3

NAW 201201-8202202-10203

1/2

5/8

12

15

17

1.574840.0 1,020

0.350.350.310.310.29

2,0400.18904.8

0.629916.0

1.216530.9

1.216530.9

1.063027.0

3.063077.8

NA 212-36212212-38212-39

21/4

23/8

27/16

60 4.3307110.0 7,490

4.484.124.003.88

11,5000.31508.0

0.689017.5

1.342534.1

1.342534.1

1.102428.0

3.374085.7

NA 213-40213

21/2

654.7244120.0 8,760 5.53

5.3112,4000.33468.5

0.37409.5

0.669317.0

0.669317.0

0.629916.0

1.712643.5

NA 201201-8202202-10203204-12204

1/2

5/8

3/4

12

15

17

20

1.850447.0 1,600

0.640.620.600.570.550.510.49

2,7400.18904.8

3/8 -24UNF

1/4 -28UNF

3/8 -24UNF

5/16 -24UNF

5/16 -24UNF

1/4 -28UNF

1/4 -28UNF

0.874022.2

0.531513.5

0.925223.5

0.720518.3

0.720518.3

0.531513.5

0.531513.5

5/16 -24UNF0.626015.9

0.468511.9

0.716518.2

0.716518.2

0.748019.0

1.901648.3

NA 206-17206-18206206-19206-20

11/16

11/8

13/16

11/4S

30 2.440962.0 2,430

0.990.950.900.900.84

4,2000.23626.0

5/16 -24UNF0.689017.5

0.531513.5

0.740218.8

0.740218.8

0.787420.0

2.011851.1

NA 207-20207-21207-22207207-23

11/4

15/16

13/8

17/16

352.834672.0 3,340

1.501.431.341.341.28

5,5350.26776.8

3.315084.2

1.500038.1

3.385886.0

2.500063.5

2.374060.3

1.752044.5

2.189055.6

1.126028.6

1.311033.3

2.752069.9

5/16 -24UNF0.531513.5

0.968524.6

0.968524.6

0.944924.0

2.468562.7

NA 210-30210-31210210-32

17/8

115/16

2S50

3.543390.0 4,910

2.382.292.232.17

7,4000.26776.8

0.720518.3

3.000076.2

3/8 -24UNF0.629916.0

1.090627.7

1.090627.7

0.984325.0

2.811071.4

NA 211-32211-34211211-35

221/8

23/16

553.9370100.0 6,440

3.483.303.063.00

9,4900.31508.0

0.818920.8

4.0157102.0

3/8 -24UNF0.689017.5

1.468537.3

1.468537.3

1.259832.0

3.626092.1

NA 215-47215215-48

215/16

375 5.1181

130.0 10,5406.266.045.84

14,6200.33468.5

0.925223.5

3.543390.0

0.689017.5

1.342534.1

3/8 -24UNF1.342534.1

1.181130.0

3.374085.7

NA 214-44214

23/4

704.9213125.0 9,620 5.80

5.6713,5300.33468.5

0.925223.5

42

STA

ND

ARD

PRO

DU

CTS

Medium duty with set screw lock.• Wide inner race with

greater load carryingcapacity than UC insert

• B-type sealsL3-type seals available in some sizes B-type Seal L3-type Seal

UCX Bearing Inserts

BearingNo.

Bore Dia.of Bearing

d

(in. ) (mm)

Dimensions (in.)(mm)

D GMNBeBi

Weight(lbs.)

BasicStaticLoad

Rating(lbs.)

BasicLoad

Rating(lbs.)

Ds

0.25596.5

1.000025.4

0.689017.5

0.787420.0

1.689042.9

UC X06-18X06X06-19X06-20

11/8

13/16

11/4

30 2.834672.0 3,340

1.351.281.281.21

5,5355/16-24UNF

0.31508.0

1.189030.2

0.748019.0

0.866122.0

1.937049.2

UC X08-24X08

11/2

403.346585.0 4,460 1.92

1.837,1105/16-24UNF

0.35439.0

1.283532.6

0.748019.0

0.944924.0

2.031551.6

UC X09-26X09-27X09-28X09

15/8

111/16

13/4

45

3.543390.0 4,910

2.362.232.142.09

7,4003/8-24UNF

0.472412.0

1.563039.7

1.000025.4

1.102428.0

2.563065.1

UC X12X12-38X12-39

23/8

27/16

60 4.7244120.0 8,760

4.524.484.30

12,4001/2-20UNF

0.31508.0

1.189030.2

0.748019.0

0.826821.0

1.937049.2

UC X07-22X07X07-23

13/8

17/16

35 3.149680.0 3,960

1.651.651.59

6,3755/16-24UNF

0.23626.0

0.874022.2

0.626015.9

0.748019.0

1.500038.1

7/815/16

125

2.440962.0 2,430

0.930.890.860.84

4,2001/4-28UNF

0.35439.0

1.315033.4

0.874022.2

0.984325.0

2.189055.6

UC X10-30X10-31X10X10-32

17/8

115/16

250

3.9370100.0 6,440

3.002.912.842.78

9,4903/8-24UNF

0.413410.5

1.563039.7

1.000025.4

1.063027.0

2.563065.1

UC X11-34X11X11-35X11-36

21/8

23/16

21/4

55 4.3307110.0 7,940

4.123.973.923.75

11,5003/8-24UNF

0.472412.0

1.748044.4

1.189030.2

1.181130.0

2.937074.6

UC X13-40X13

21/2

654.9213125.0 9,620 4.75

4.5613,5301/2-20UNF

0.472412.0

1.752044.5

1.311033.3

1.259832.0

3.063077.8

UC X14-43X14

211/16

705.1181130.0 10,540 6.06

6.0414,6201/2-20UNF

0.590615.0

2.216556.3

1.563039.7

1.496138.0

3.779596.0

UC X17X17-55X17-56

37/16

31/2

85 6.2992160.0 15,800

11.110.710.4

21,1201/2-20UNF

0.551214.0

1.941049.3

1.311033.3

1.299233.0

3.252082.6

UC X15-47X15X15-48

215/16

375 5.5118

140.0 11,7007.777.527.32

16,0001/2-20UNF

0.708718.0

2.689068.3

1.937049.2

1.692943.0

4.6260117.5

UC X20X20-63X20-64

315/16

4

100 7.4803190.0 23,100

18.918.618.4

29,3005/8-18UNF

UC X05-14X05-15X05X05-16

43

STAN

DA

RD PRO

DU

CTS

Standard duty with snap ring and set screw lock.• Wide inner race• Black Oxide Finish

• B-type seals• Please inquire about

Free Running or HighTemperature units.

B-type Seal

ER Bearing Inserts

BearingNo.

Bore Dia.of Bearing

d

(in. ) (mm)

Dimensions (in.)(mm)

D JHAEMNBeBi

Weight(lbs.)

BasicStaticLoad

Rating(lbs.)

BasicLoad

Rating(lbs.)

R GP Ds (in.)

ER 201201-8202202-10203204-12204

1/2

5/8

3/4

1.850447.0 1,600 0.49

ER 210-30210-31210210-32

17/8

115/16

2S

3.543390.0 4,910 2.16

12

15

17

20

50

0.09382.38

0.17194.4

0.04691.19

0.484412.30

0.812520.6

0.406310.3

0.625015.9

1.218831.0

0.12523.18

0.29537.5

0.09492.41

0.882322.41

1.283532.6

0.748019.0

1.102428.0

2.031551.6

2,740

7,400

0.17194.37

0.33038.39

0.35439.0

0.18754.8

3.791396.3

2.062552.4

0.09382.38

0.20315.2

0.04691.19

0.609415.48

0.859421.8

0.515613.1

0.750019.1

1.375034.9

ER 205-14205-15205205-16

7/815/16

125

2.047252.0 1,750 0.603,0100.2344

5.950.2188

5.62.265657.5

0.12523.18

0.23626.0

0.06501.65

0.912223.17

1.189030.2

0.748019.0

1.102428.0

1.937049.2

ER 209-26209-27209-28209

15/8

111/16

13/4

45

3.346585.0 4,460 1.987,1100.3602

9.150.3150

8.03.598491.4

1/4-28UNF

5/16-24UNF

3/8-24UNF

1/4-28UNF

1/4-28UNF0.12523.18

0.21655.5

0.65501.65

0.676017.17

0.874022.2

0.626015.9

0.866122.0

1.500038.1

ER 206-17206-18206206-19206-20

11/16

11/8

13/16

11/4S

30 2.440962.0 2,430 0.864,2000.2421

6.150.2362

6.02.657567.5

5/16-24UNF0.12523.18

0.21655.5

0.06501.65

0.754719.17

1.000025.4

0.689017.5

0.944924.0

1.689042.9

ER 207-20207-21207-22207207-23

11/4

15/16

13/8

17/16

352.834672.0 3,340 1.395,5350.2815

7.150.2559

6.53.090678.4

0.12523.18

0.23626.0

0.06501.65

0.912223.17

1.189030.2

0.748019.0

1.102428.0

1.937049.2

ER 208-24208-25208

11/2

19/16

403.149680.0 3,960 1.796,3755/16-24UNF0.3602

9.150.3150

8.03.401686.4

0.12523.18

0.29537.5

0.09492.41

0.961024.41

1.315033.4

0.874022.2

1.181130.0

2.189055.6

ER 211-32211-34211211-35

221/8

23/16

553.9370100.0 6,440 3.119,4903/8-24UNF0.3697

9.390.3543

9.04.1850106.3

0.12523.18

0.29537.5

0.09492.41

1.039826.41

1.563039.7

1.000025.4

1.259832.0

2.563065.1

ER 212-36212212-38212-39

21/4

23/8

27/16

60 4.3307110.0 7,940 4.1711,5003/8-24UNF0.4091

10.390.413410.5

4.5827116.4

0.15633.97

0.37509.53

0.11302.87

1.234431.35

1.750044.5

1.312533.3

1.500038.1

3.062577.8

ER 215-47215215-48

215/16

375 5.1181

130.0 10,540 6.3014,6201/2-20UNF0.484412.30

0.437511.1

5.5000139.7

44

STA

ND

ARD

PRO

DU

CTS

SB & CSB Bearing Inserts

• Set screw lock• Available relubricatable or

non-relubricatable • Narrow inner race

• K-type seals• Spherical (SB) and

cylindrical (CSB)

SBG Relubricatable Inserts

SBN and CSB Non-Relubricatable Inserts

BearingNo.

Bore Dia.of Bearing

d

(in. ) (mm)

Dimensions (in.)(mm)

Be GMNBiD

Weight(lbs.)

BasicStaticLoad

Rating(lbs.)

BasicLoad

Rating(lbs.)

Ds

0.31508.0

0.984325.0

0.433111.0

1.417336.0

3.149680.0

SB 208-24G208-25G208G

11/2

19/16

400.866122.0 3,960 1.516,3755/16 -24UNF

0.15754.0

0.629916.0

0.23626.0

0.866122.0

1.574840.0

SB 201G201-8G202G202-10G203G

1/2

5/8

12

15

17

0.472412.0 1,020 0.222,04010-32UNF

0.19695.0

0.708718.0

0.27567.0

0.984325.0

1.850447.0

SB 204-12G204G

3/4

200.551214.0 1,600 0.332,7401/4 -28UNF

0.21655.5

0.767719.5

0.29537.5

1.063027.0

2.047252.0

SB 205-14G205-15G205G205-16G

7/815/16

125

0.590615.0 1,750 0.403,0101/4 -28UNF

0.23626.0

0.866122.0

0.31508.0

1.181130.0

2.440962.0

SB 206-17G206-18G206G206-19G206-20G

11/16

11/8

13/16

11/4S

30 0.708718.0 2,430 0.684,2001/4 -28UNF

0.23626.0

0.925223.5

0.37409.5

1.299233.0

2.834672.0

SB 207-20G207-21G207-22G207G207-23G

11/4

15/16

13/8

17/16

350.748019.0 3,340 1.065,5355/16 -24UNF

0.31508.0

0.984325.0

0.35439.0

1.338634.0

3.149680.0

SB 208-24N208N

11/2

400.708718.0 3,960 1.326,3755/16 -24UNF

0.15754.0

0.629916.0

0.23626.0

0.866122.0

1.574840.0

SB 201N201-8N202N202-10N203N

1/2

5/8

12

15

17

0.472412.0 1,020 0.222,04010-32UNF

0.19695.0

0.708718.0

0.27567.0

0.984325.0

1.850447.0

SB 204-12N204N

3/4

200.551214.0 1,600 0.332,7401/4 -28UNF

0.21655.5

0.767719.5

0.29537.5

1.063027.0

2.047252.0

SB 205-14N205-15N205N205-16N

7/815/16

125

0.590615.0 1,750 0.403,0101/4 -28UNF

0.23626.0

0.826721.0

0.31508.0

1.141729.0

2.440962.0

SB 206-17N206-18N206N206-19N206-20N

11/16

11/8

13/16

11/4S

30 0.629916.0 2,430 0.604,2001/4 -28UNF

0.23626.0

0.925223.5

0.33468.5

1.259832.0

2.834672.0

SB 207-20N207-21N207-22N207N207-23N

11/4

15/16

13/8

17/16

350.669317.0 3,340 0.935,5355/16 -24UNF

K-type Seal

45

STAN

DA

RD PRO

DU

CTS

• Eccentric locking collar• Narrow inner race• K-type seals

• Available relubricatable (G) or non-relubricatable (N)

• Spherical (SA) and cylindrical (CSA)

SA & CSA Bearing Inserts

BearingNo.

Bore Dia.of Bearing

d

(in. ) (mm)

Dimensions (in.)(mm)

Be GMNBiD

Weight(lbs.)

BasicStaticLoad

Rating(lbs.)

BasicLoad

Rating(lbs.)

K HDs

0.18904.8

0.551314.0

0.29537.5

1.220531.0

2.047252.0

SA205-14205-15205205-16

7/815/16

125

0.590615.0 1,750 0.513,0101.5000

38.1

0.26776.8

0.755919.2

0.433111.0

1.720543.7

3.346585.0

SA209-26209-27209-28209

15/8

111/16

13/4

45

0.866122.0 4,460 1.817,1102.5000

63.5

0.26776.8

0.755919.2

0.433111.0

1.720543.7

3.149680.0

SA208-24208-25208

11/2

19/16

400.866122.0 3,960 1.656,3752.3740

60.3

0.18904.8

0.496012.6

0.25596.5

1.126028.6

1.574840.0

SA201201-8202202-10203

1/2

5/8

12

15

17

0.511813.0 1,020 0.292,0401.1260

28.6

0.26776.8

0.755919.2

0.433111.0

1.720543.7

3.543390.0

SA210-30210-31210210-32

17/8

115/16

2S50

0.866122.0 4,910 1.877,4002.7520

69.9

0.31508.0

0.803120.4

0.472412.0

1.905548.4

3.9370100.0

SA211-32211-34211211-35

221/8

23/16

550.944924.0 6,440 2.659,4903.0000

76.2

0.18904.8

0.551214.0

0.29537.5

1.220531.0

1.850447.0

SA204-12204

3/4

200.590615.0 1,600 0.432,7401.3110

33.3

0.720518.3

0.531513.5

0.818920.8

0.720518.3

0.720518.3

0.531513.5

0.531513.5

5/16-24UNF

1/4-28UNF

3/8-24UNF

5/16-24UNF

5/16-24UNF

1/4-28UNF

1/4-28UNF

0.626015.9

5/16-24UNF0.23626.0

0.582714.8

0.35439.0

1.405535.7

2.440962.0

SA206-17206-18206206-19206-20

11/16

11/8

13/16

11/4S

30 0.708718.0 2,430 0.754,2001.7520

44.5

0.689017.5

5/16-24UNF0.26776.8

0.626015.9

0.37409.5

1.531538.9

2.834672.0

SA207-20207-21207-22207207-23

11/4

15/16

13/8

17/16

350.748019.0 3,340 1.265,5352.1890

55.6

K-type Seal

46

STA

ND

ARD

PRO

DU

CTS

HUC High Temperature Bearings

UnitNo.

ShaftDia.(in.)

IPTCI’s high temperature bearing inserts are designed for applications up to 400° F (continuous), 450° F (intermittent).These special insert bearings can be used in any of our gray iron, plated, or stainless housings.

IPTCI’s HUC inserts consist of the following:

• Specially heat treated rings.• C4 Internal Clearance – To accommodate thermal expansion. (See pg. 87 clearance data.)• Silicone Rubber Seals – Offering excellent long term heat resistance.• B-type seal configuration for wash down protection.• High temperature, H-1 food grade grease with operating range of -45° F to +450° F. • Black oxide finish, for additional corrosion resistance.

Note: External dimensions of HUC are the same as UC bearing insert shown on page 44.Please inquire about High Temperature ER Inserts (HER).

204 3/4

205 7/8 , 1

206 13/16 , 11/4S

207 11/4 , 13/8 , 17/16

208 11/2

209 111/16 , 13/4

210 115/16 , 2S

UnitNo.

ShaftDia.(in.)

204 3/4

205 7/8 , 1

206 13/16 , 11/4S

207 11/4 , 13/8 , 17/16

208 11/2

209 111/16 , 13/4

210 115/16 , 2S

Mounted UnitsAvailable in Standard and Corrosion Resistant Products

HUC bearings are available as follows:

Bearing Inserts

B-type Seal

47

STAN

DA

RD PRO

DU

CTS

Please ask about relubricatable flangettes or rubber grommets.

Pressed Steel Flanges and Pillow Blocks

PP-ST Snap Together Pillow Block Zinc plated

PFL 2-Bolt Flangette Non-plated

PF 3-Bolt Flangette Round Non-plated

PFL 203 1/2-5/8 33/16 25/16 21/2 9/32 9/32 .083 40mm

PFL 204 3/4 39/16 25/8 213/16 5/16 11/32 .083 47mm

PFL 207 11/4-17/16 415/16 311/16 315/16 7/16 13/32 .104

PFL 206 11/16-11/4S 47/16 35/16 39/16 11/32 13/32 .104 62mm

PFL 205 7/8-1 33/4 251/64 3 11/32 11/32 .083 52mm

PF 203 1/2-5/8 33/16 21/2 9/32 9/32 .075 40mm

PF 204 3/4 39/16 213/16 5/16 11/32 .083 47mm

PF 207 11/4-17/16 413/16 315/16 3/8 13/32 .104 72mm

PF 206 11/16-11/4S 47/16 39/16 11/32 13/32 .104 62mm

PF 205 7/8-1 33/4 3 11/32 11/32 .083 52mm

StampingNo.

ShaftSize

A B E M S-2 T D

72mm

StampingNo.

ShaftSize

A E M 3-S T D

PF 4-Bolt Flangette Round Non-plated

PF 208 11/2-19/16 513/16 411/16 13/32 17/32 .134 80mm

PF 209 15/8-13/4 57/8 43/4 7/16 17/32 .134 85mm

PF 211 2-23/16 69/16 57/16 15/3217/32 .149 100mm

PF 210 17/8-2 61/8 5 7/16 17/32 .149 90mm

StampingNo.

ShaftSize

A B E H S1 S2 D

PP 203 1/2-5/8 35/8 1 211/16 7/8 11/32 1/2 40mm

PP 204 3/4 41/8 1 3 1 13/32 1/2 47mm

11/4-17/16 53/4 11/4 41/4 19/16 17/32 3/4 72mm

PP 206 11/16-11/4S 47/8 11/8 33/4 15/16 13/32 9/16 62mm

PP 205 7/8-1 41/2 11/8 33/8 11/8 13/32 9/16

13/4

21/16

31/8

25/8

27/32 52mm

G

.133

.178

.238

.238

.208

PP 207

PP 203 ST 1/2-5/8 35/8 1 211/16 7/8 11/32 1/2 40mm

PP 204 ST 3/4 41/8 1 3 1 13/32 1/2 47mm

11/4-17/16 53/4 11/4 41/4 19/16 17/32 3/4 72mm

PP 206 ST 11/16-11/4S 47/8 11/8 33/4 15/16 13/32 9/16 62mm

PP 205 ST 7/8-1 41/2 11/8 33/8 11/8 13/32 9/16

13/4

21/16

31/8

25/8

27/32 52mm

.133

.178

.238

.238

.208

Optional Features: 1. Zinc Plated 2. Rubber GrommetAll flangettes are supplied bulk. Add .70/set for individual boxing.

PP 207 ST

PFT 3-Bolt Flangette Triangular Non-plated

PFT 203 1/2-5/8 33/16 21/2 9/32 9/32 .075 40mm

PFT 204 3/4 39/16 213/16 5/16 11/32 .083 47mm

PFT 206 11/16-11/4S 47/16 39/16 11/32 13/32 .104 62mm

PFT 205 7/8-1 33/4 3 11/32 11/32 .083 52mm

PFT 207 11/4-17/16 413/16 315/16 3/8 13/32 .104 72mm

PP Pillow Block Zinc plated

W

48

CORR

OSI

ON

RES

ISTA

NT

Corrosion Resistant Bearing & Housing SolutionsBearing Insert Options

SUC, SNA, SSB – Stainless SteelThe most common solution for hostile chemicalwash down applications, IPTCI’s stainless insertsare composed of the following: Balls & Rings 440 Stainless SteelSet Screws 304 Stainless SteelSlinger & Seal Frame 302 Stainless SteelRetainer 302 Stainless SteelEccentric Collar (SNA only) 304 Stainless SteelSeal Silicone RubberLubrication H-1 Food Grade Grease Operating Temp. Range -10° F to 250° F

SSER – Stainless Steel ER StyleWith the same component composition of SUC,SSER is designed to keep your cylindricalapplications turning in corrosive environments. Alsosee black oxide ER bearings.

CUC, CNA– Hard Chrome Coated Highly effective for intermediate wash down applications, chrome coated inserts can dramaticallyextend bearing life beyond that of other platedbearing products. CUC/CNA inserts are composed of the following:Rings Hard Chrome CoatedBalls 440 Stainless SteelSet Screws 304 Stainless SteelSlinger & Seal Frame 302 Stainless SteelRetainer 302 Stainless Steel*Eccentric Collar (CNA only) 304 Stainless SteelSeal Silicone RubberLubrication H-1 Food Grade GreaseOperating Temp. Range -10° F to 250° F*chrome coated for sizes 213-215

BUC – Black Oxide A popular choice for mildly corrosive applications. Also see Black Oxide ER and Black Oxide High Temperature HUC bearings.

Housing Options

304 Stainless SteelStainless steel housings are generallythe most effective solution for highlycorrosive applications. They do notexperience the same flaking, cracking, deformation ordiscoloration issues associated with other corrosion resistanthousing materials. They are virtually unaffected by scrapesand can easily handle significant radial loads.

To reduce residual contaminants, IPTCI stainless housings are made with extremely smooth surfaces and have solid bases and backs. Many styles are alsoavailable with end caps.

316 Stainless SteelA frequently requested choice for certain chemicalenvironments. 316 is available on a made to order basis.

Thermoplastic Where proven corrosion resistance must bebalanced with more favorable economics,IPTCI’s thermoplastic housings are anexcellent choice, and can be assembled with any insert in our catalog.

IPTCI’s thermoplastic housings are off-white in color andmade from glass reinforced PBT resin. Along with excellentchemical resistance, this high performance grade plasticoffers very favorable mechanical, thermal and electricalproperties. Also, compared with other types of plastics, IPTCIthermoplastic is very resistant to moisture absorption.Operating temperature range is -10° F to 210° F.

Like our stainless steel housings, IPTCI thermoplastichousings are made with extremely smooth surfaces and havesolid bases and backs. All sleeves, bushings and greasefittings used in our thermoplastic units are made from 300series stainless steel.

Nickel PlatedUsed with stainless, hard chrome coated, or black oxide inserts, IPTCI’s copper nickel chrome housingsare a common choice when the housing requires mild tointermediate corrosion protection.

End CapsFor additional protection from contamination, or for increasedpersonnel safety, many of IPTCI’s stainless and thermoplastichousings are available with plastic end caps.

49

CORRO

SION

RESISTAN

T

SUCSP & SNASP Pillow Blocks

UnitNo.

Shaft Dia.

d

(in. ) (mm)

Dimensions (in.)(mm)

H NWGS1S2BEA

BoltUsed

(in.)

Weight(lbs.)

HousingNo.

BearingNo.

Bi M

SUCSP 206-18206 206-19206-20

11/8

13/16

11/4S

111/16

42.91/2 SP 206 3.3

SUCSP 207-20207-21207-22207 207-23

11/4

15/16

13/8

17/16

17/8

47.61/2 SP 207 4.2

SUCSP 208-24208

11/2 115/16

49.21/2 SP 208 5.4

SUCSP 209-27209-28209

111/16

13/421/8

54.01/2 SP 209 5.8

30

35

40

45

0.626015.9

319/64

8411/16

189/16

1413/16

21127/32

4743/4

121613/32

163

0.689017.5

311/16

943/4

199/16

147/8

22129/32

485

127617/32

166

0.748019.0

315/16

10025/32

209/16

147/8

22251

53/8

13671/4

184

0.748019.0

47/32

10725/32

2019/32

1513/16

2121/16

5253/4

14671/2

190

SUC 206-18206 206-19206-20

SUC 207-20207-21207-22207 207-23

SUC 208-24208

SUC 209-27209-28209

0.748019.0

41/2

1147/8

2223/32

1815/16

2425/16

5961/4

1598

203SUCSP 210-31

210 210-32

115/16

2S50 21/4

57.2SUC 210-31

210 210-32

5/8 SP 210 7.0

0.874022.2

415/16

1257/8

2223/32

1815/16

2423/8

6067/8

174817/32

217SUCSP 211-32

211-352

23/16

21/2

63.5SUC 211-32

211-355/8 SP 211 8.8

1.000025.4

53/8

137125

25/32

20125

21/2

64711/32

187915/32

240SUCSP 212-36

212-39 21/4

27/16

23/4

69.8SUC 212-36

212-395/8 SP 212 11.2

1.500038.1

1.689042.9

1.937049.2

1.937049.2

2.031551.6

2.189055.6

2.563065.1

1.000025.4

0.874022.2

1.189030.2

1.189030.2

1.283532.6

1.315033.4

1.563039.7

SUCSP 201-8202-10

1/25/8

15/16

33.35

12733/4

9511/2

3811/16

177/16

1119/32

1529/16

650.5000

12.73/8 SP 204 1.8

SUCSP 204-12204

3/4 15/16

33.33/8 SP 204 1.6

SUCSP 205-14205 205-16

7/8

117/16

36.53/8 SP 205 2.1

20

25

0.500012.7

29/16

6519/32

157/16

1111/16

1711/2

3833/4

955

127

0.563014.3

23/4

705/8

161/2

1311/16

1711/2

3841/8

105515/32

139

SUC 201-8202-10

SUC 204-12204

SUC 205-14205 205-16

1.220531.0

1.338634.0

1.220531.0

0.720518.3

0.775619.7

0.720518.3

SUCSP Set Screw Type

SNASP 206-18206 206-19206-20

11/8

13/16

11/4S

111/16

42.91/2 SP 206 3.4

SNASP 207-20207-22207 207-23

11/4

13/8

17/16

17/8

47.61/2 SP 207 4.4

SNASP 208-24208

11/2 115/16

49.21/2 SP 208 5.6

SNASP 209-28 13/421/8

54.01/2 SP 209 6.1

30

35

40

0.626015.9

319/64

8411/16

189/16

1413/16

21127/32

4743/4

121613/32

163

0.689017.5

311/16

943/4

199/16

147/8

22129/32

485

127617/32

166

0.748019.0

315/16

10025/32

209/16

147/8

22251

53/8

13671/4

1840.7480

19.047/32

10725/32

2019/32

1513/16

2121/16

5253/4

14671/2

190

SNA 206-18206 206-19206-20

SNA 207-20207-22207 207-23

SNA 208-24208

SNA 209-28

0.748019.0

41/2

1147/8

2223/32

1815/16

2425/16

5961/4

1598

203SNASP 210-31

210-32115/16

2S21/4

57.2SNA 210-31

210-325/8 SP 210 7.4

1.811046.0

1.960649.8

2.122053.92.1220

53.9

2.248057.1

0.740218.8

0.716518.2

0.842521.40.8425

21.4

0.968524.6

SNASP 204-12204

3/4 15/16

33.33/8 SP 204 1.7

SNASP 205-14205 205-16

7/8

117/16

36.53/8 SP 205 2.2

20

25

0.500012.7

29/16

6519/32

157/16

1111/16

1711/2

3833/4

955

127

0.563014.3

23/4

705/8

161/2

1311/16

1711/2

3841/8

105515/32

139

SNA 204-12204

SNA 205-14205 205-16

1.543339.2

1.622041.2

0.669317.0

0.685017.4

SNASP Eccentric Locking Collar Type

B-type Seal

All Stainless Steel

B-type seal available in allstyles and sizes.

SUCSP

• Set Screw Locking

SNASP

• With Eccentric locking Collar

L3-type Seal

L3-type seal available inSUC units only. Limitedsizes. Consult IPTCI forspeed limitations.

50

CORR

OSI

ON

RES

ISTA

NT

50

All Stainless Steel

UnitNo.

Shaft Dia.

d

(in. ) (mm)

Dimensions (in.)(mm)

SUCSF 205-14205205-16

7/8

133/4

9523/4

705/8

161/2

1311/16

2729/64

11.5113/32

35.71.3386

34.00.7756

19.73/8 SF 205 2.1

SUCSF 204-12204

3/4 33/8

863/8 SF 204 1.6

SUCSF 206-18206206-19206-20

11/8

13/16

11/4S

41/4

1087/16 SF 206 2.9

SUCSF 207-20207-21207-22207207-23

11/4

15/16

13/8

17/16

419/32

1177/16 SF 207 3.8

SUCSF 208-24208

11/2 51/8

1301/2 SF 208 4.9

25

20

30

35

40

A MBiZSLGIE

BoltUsed

(in.)

Weight(lbs.)

HousingNo.

0.720518.3

1.220531.0

15/16

33.37/16

111

25.47/16

1119/32

1521/2

64

0.874022.2

1.500038.1

119/32

40.233/64

1317/32

311/2

1345/64

1831/4

83

1.000025.4

1.689042.9

13/4

44.433/64

13111/32

3419/32

153/4

1935/8

92

1.189030.2

1.937049.2

21/32

51.235/64

14113/32

3619/32

1553/64

214

102

BearingNo.

SUC 205-14205205-16

SUC 204-12204

SUC 206-18206206-19206-20

SUC 207-20207-21207-22207207-23

SUC 208-24208

0.500012.7

0.626015.9

0.563014.3

0.689017.5

0.748019.0

N

SUCSF 201-8202-10

1/25/8

33/8

863/8 SF 204 1.80.7205

18.31.2205

31.015/16

33.37/16

111

25.47/16

1119/32

1521/2

64SUC 201-8

202-100.5000

12.7

1.189030.2

1.937049.2

21/16

52.25/8

1611/2

385/8

1655/64

2241/8

105SUCSF 209-27

209-28209

111/16

13/4

45513/32

1379/16 SF 209 5.4

SUC 209-27209-28209

0.748019.0

1.283532.6

2.031551.6

25/32

54.65/8

1619/16

405/8

1655/64

2243/8

111SUCSF 210-31

210210-32

115/16

2S50 55/8

1439/16 SF 210 5.9

SUC 210-31210210-32

0.748019.0

1.315033.4

2.189055.6

25/16

58.443/64

17111/16

4323/32

1863/64

2551/8

130SUCSF 211-32

211-352

23/16

63/8

1625/8 SF 211 8.1SUC 211-32

211-350.8740

22.21.5630

39.72.5630

65.1223/32

68.743/64

1717/8

4823/32

1819/64

2955/8

143SUCSF 212-36

212-3921/4

27/16

67/8

1755/8 SF 212 10.01.0000

25.4SUC 212-36

212-39

SUCSF Set Screw Type

SNASF Eccentric Locking Collar Type

SNASF 205-14205205-16

7/8

133/4

9523/4

705/8

161/2

1311/16

2729/64

11.5111/16

42.91.6220

41.20.6850

17.43/8 SF 205 2.2

SNASF 204-12204

3/4 33/8

863/8 SF 204 1.7

SNASF 206-18206206-19206-20

11/8

13/16

11/4S

41/4

1087/16 SF 206 3.0

SNASF 207-20207-22207207-23

11/4

13/8

17/16

419/32

1177/16 SF 207 4.0

SNASF 208-24208

11/2 51/8

1301/2 SF 208 5.1

25

20

30

35

40

0.669317.0

1.543339.2

15/8

41.57/16

111

25.47/16

1119/32

1521/2

64

0.716518.2

1.811046.0

157/64

48.133/64

1317/32

311/2

1345/64

1831/4

83

0.740218.8

1.960649.8

21/64

51.333/64

13111/32

3419/32

153/4

1935/8

92

0.842521.4

2.122053.9

213/64

55.935/64

14113/32

3619/32

1553/64

214

102

SNA 205-14205205-16

SNA 204-12204

SNA 206-18206206-19206-20

SNA 207-20207-22207207-23

SNA 208-24208

0.500012.7

0.626015.9

0.563014.3

0.689017.5

0.748019.0

0.842521.4

2.122053.9

215/64

56.95/8

1611/2

385/8

1655/64

2241/8

105SNASF 209-28 13/4513/32

1379/16 SF 209 5.7SNA 209-280.7480

19.0

0.968524.6

2.248057.1

223/64

60.15/8

1619/16

405/8

1655/64

2243/8

111SNASF 210-31

210-32115/16

2S55/8

1439/16 SF 210 6.3SNA 210-31

210-320.7480

19.0

SUCSF• Set Screw Locking

SNASF• With Eccentric Locking Collar

SUCSF & SNASF 4-Bolt Flange Units

B-type Seal

B-type seal available in allstyles and sizes.

L3-type Seal

L3-type seal available inSUC units only. Limitedsizes. Consult IPTCI forspeed limitations.

51

CORRO

SION

RESISTAN

T

SUCSFL & SNASFL 2-Bolt Flange Units

UnitNo.

Shaft Dia.

d

(in. ) (mm)

Dimensions (in.)(mm)

SUCSFL 201-8202-10

1/25/8

37/8

993

76.219/32

157/16

1111/16

2725/64

1023/8

6015/16

33.30.5000

12.75/16 SFL 203 1.0

SUCSFL 204-8204-10204-12204

1/25/83/4

415/32

1145/16 SFL 204 1.2

SUCSFL 205-14205205-16

47/8

1243/8 SFL 205 1.5

SUCSFL 207-20207-21207-22207207-23

11/4

15/16

13/8

17/16

61/8

1557/16 SFL 207 2.9

SUCSFL 208-24208

11/2 63/4

1717/16 SFL 208 3.7

SUCSFL 206-18206206-19206-20

11/8

13/16

11/4S

59/16

1413/8 SFL 206 2.2

20

25

35

40

30

A NZBSLGIE

BoltUsed

(in.)

Weight(lbs.)

HousingNo.

0.500012.7

15/16

33.323/8

6025/64

10125

7/16

1119/32

15317/32

89.7

0.563014.3

113/32

35.7211/16

6815/32

11.911/16

275/8

16357/64

98.8

0.689017.5

13/4

44.5317/32

9033/64

13111/32

349/16

143/4

1951/8

130.2

0.748019.0

250.8

315/16

10033/64

13113/32

369/16

1453/64

21521/32

143.7

0.626015.9

119/32

40.535/32

8015/32

11.917/32

311/2

1345/64

18419/32

116.7

BearingNo.

SUC 201-8202-10

SUC 201-8202-10204-12204

SUC 205-14205205-16

SUC 207-20207-21207-22207207-23

SUC 208-24208

SUC 206-18206206-19206-20

0.748019.0

21/16

52.441/4

10819/32

1511/2

3819/32

1555/64

22527/32

148.4SUCSFL 209-27

209-28209

111/16

13/4

4571/16

179SUC 209-27

209-28209

1/2 SFL 209 4.4

0.748019.0

25/32

54.8417/32

11519/32

1519/16

4019/32

1555/64

2263/16

157SUCSFL 210-31

210210-32

115/16

2S50 77/16

189SUC 210-31

210210-32

1/2 SFL 210 5.1

1.220531.0

1.220531.0

1.338634.0

1.689042.9

1.937049.2

1.500038.1

1.937049.2

2.031551.6

Bi

0.720518.3

0.720518.3

1.000025.4

0.775619.7

1.189030.2

0.874022.2

1.189030.2

1.283532.6

M

1/2

13

7/8

1

SNASFL 204-12204

3/4 415/32

1145/16 SFL 204 1.3

SNASFL 205-14205205-16

47/8

1243/8 SFL 205 1.6

SNASFL 207-20207-22207207-23

11/4

13/8

17/16

61/8

1557/16 SFL 207 3.1

SNASFL 208-24208

11/2 63/4

1717/16 SFL 208 3.9

SNASFL 206-18206206-19206-20

11/8

13/16

11/4S

59/16

1413/8 SFL 206 2.3

20

25

35

40

30

0.500012.7

15/8

41.523/8

6025/64

10125

7/16

1119/32

15317/32

89.7

0.563014.3

111/16

42.9211/16

6815/32

11.911/16

275/8

16357/64

98.8

0.689017.5

21/64

51.3317/32

9033/64

13111/32

349/16

143/4

1951/8

130.2

0.748019.0

213/64

55.9315/16

10033/64

13113/32

369/16

1453/64

21521/32

143.7

0.626015.9

157/64

48.135/32

8015/32

11.917/32

311/2

1345/64

18419/32

116.7

SNA 204-12204

SNA 205-14205205-16

SNA 207-20207-22207207-23

SNA 208-24208

SNA 206-18206206-19206-20

0.748019.0

215/64

56.941/4

10819/32

1511/2

3819/32

1555/64

22527/32

148.4SNASFL 209-28 13/471/16

179 SNA 209-281/2 SFL 209 4.7

0.748019.0

223/64

60.1417/32

11519/32

1519/16

4019/32

1555/64

2263/16

157SNASFL 210-31

210-32115/16

2S77/16

189SNA 210-31

210-321/2 SFL 210 5.5

1.543339.2

1.622041.2

1.960649.8

2.122053.9

1.811046.0

2.122053.9

2.248057.1

0.669317.0

0.740218.8

0.685017.4

0.842521.4

0.716518.2

0.842521.4

0.968524.6

1/2

13

7/8

1

SUCSFL Set Screw Type

SNASFL Eccentric Locking Collar Type

SUCSFL• Set Screw Locking

SNASFL• With Eccentric Locking Collar

All Stainless Steel

B-type Seal

B-type seal availablein all styles and sizes.

L3-type Seal

L3-type seal available in SUCunits only. Limited sizes. ConsultIPTCI for speed limitations.

52

CORR

OSI

ON

RES

ISTA

NT

52

SSBSLF2-Bolt Flange UnitsAll Stainless Steel• Square bolt holes• K-type seals• Narrow inner race bearing

SSBSLF & SSBSRFB

UnitNo.

Shaft Dia.

d

(in. ) (mm)

Dimensions (in.)(mm)

A NZBSLGIE

BoltUsed

(in.)

Weight(lbs.)

HousingNo.

BearingNo.

Bi

0.27567.0

15/32

29.0213/32

6125/64

1025/32

207/16

117/16

11213/16

71.5SSBSLF 204-12

2043/4

20317/32

905/16 SLF 204 0.7SSB 204-12

2040.9843

25.0

0.29537.5

13/16

30.5217/32

6425/64

1025/32

207/16

117/16

11263/64

76.0SSBSLF 205-14

205205-16

7/8

125 33/4

955/16 SLF 205 0.9

SSB 205-14205205-16

1.063027.0

0.31508.0

119/64

33.0376

15/32

127/8

2315/32

1215/32

1239/16

90.5

SSBSLF 206-18206206-19206-20

11/8

13/16

11/4S

30 47/16

1133/8 SLF 206 1.2

SSB 206-18206206-19206-20

1.141729.0

0.33468.5

125/64

35.531/2

8915/32

1215/16

2433/64

1333/64

13315/16

100.0

SSBSLF 207-20207-22207207-23

11/4

13/8

17/16

35413/16

1223/8 SLF 207 1.7

SSB 207-20207-22207207-23

1.259832.0

0.23626.0

125.4

27/32

565/16

823/32

183/8

103/8

1021/2

63.5SSBSLF 201-8

202-101/25/8

33/16

811/4 SLF 203 0.6SSB 201-8

202-100.8661

22.0

K-type Seal(back)

SSBSRFB3-Bolt Flange UnitsAll Stainless Steel• Square bolt holes• K-type seals• Narrow inner race bearing

K-type Seal(back)

UnitNo.

Shaft Dia.

d

(in. ) (mm)

Dimensions (in.)(mm)

A (in)ZSLBGE

Weight(lbs.)

HousingNo.

BearingNo.

Bi

5/1617/32

31.011/32

925/32

2027/8

737/16

113

76.2

7/8

125 33/4

95 SRFB 205 .9SSB 205-14

205205-16

1.063027.0

3/819/32

32.313/32

1057/64

23376

15/32

1239/16

90.5

11/8

13/16

11/4S

30 47/16

113 SRFB 206 1.2SSB 206-18

206206-19206-20

1.141729.0

3/8125/64

35.513/32

1015/16

2431/2

891/2

13315/16

100

11/4

13/8

17/16

35413/16

122 SRFB 207 1.7SSB 207-20

207-22207207-23

1.259832.0

5/1615/32

29.411/32

925/32

2025/8

677/16

11213/16

71.43/4

2039/16

90 SRFB 204 .8SSB 204-12204

0.984325.0

27/32

56

213/32

61

17/8

48

125/32

45

Y

BoltUsed

SSBSRFB 204-12204

SSBSRFB 205-14205205-16

SSBSRFB 206-18206206-19206-20

SSBSRFB 207-20207-22207207-23

B-type Seal(front)

B-type Seal(front)

53

CORRO

SION

RESISTAN

T

SUCSFCSPiloted Flange UnitsAll Stainless Steel• B-type seals

B-type seals

SUCSFCS & SUCSFB

UnitNo.

Shaft Dia.

d (in.) (mm)

Dimensions (in.) (mm)

A BiIFGJSP

BoltUsed

(in.)

Weight(lbs.)

Housing No.

Bearing No.

Z MN

1.9370 49.2

23/64

93.62592.1

25/32

20.07/16

11.015/32

12.043/8

111SUCSFCS 209-27

209-28209

111/16

13/4

4551/4

133SUC 209-27

209-28209

3/8 SFCS 209 4.6117/32

39.2 1.1890 30.2

0.7480 19.0

1.5000 38.1

25/64

103.00076.2

49/64

19.515/64

6.03/8

9.535/8

92

SUCSFCS 206-18206206-19206-

11/8

13/16

11/4S

30 43/8

1115/16 SFCS 206 2.7

SUC 206-18206206-19206-20

19/32

32.2 0.8740 22.2

0.6260 15.9

1.6890 42.9

5/16

83.37585.7

45/64

18.03/8

9.515/32

12.041/8

104.8

SUCSFCS 207-20207-21207-22207207-23

11/4

15/16

13/8

17/16

355

1273/8 SFCS 207 3.5

SUC 207-20207-21207-22207207-23

15/16

33.4 1.0000 25.4

0.6890 17.5

2.0315 51.6

5/16

84.250108.0

25/32

20.015/32

12.035/64

14.051/8

130SUCSFCS 210-31

210210-32

115/16

2S50 63/32

1557/16 SFCS 210 6.0

SUC 210-31210210-32

119/32

40.6 1.2835 32.6

0.7480 19.0

1.9370 49.2

23/64

93.62592.1

49/64

19.57/16

11.015/32

12.043/8

111SUCSFCS 208-24

20811/2

4051/4

1333/8 SFCS 208 4.4SUC 208-24

208117/32

39.2 1.1890 30.2

0.7480 19.0

SUCSFB 3-Bolt Flange Bracket Units All Stainless Steel

• B-type seals

UnitNo.

Shaft Dia.

d(in.) (mm)

Dimensions (in.) (mm)

SUCSFB 201-8 202-10

1/25/8

41/4

10821/2

6423/8

601

2525/64

9.95/16

8111/16

43.37/8

22.25/8

165/16 SFB 204 1.4

SUCSFB 204-12 204

3/4 41/4

1085/16 SFB 204 1.3

SUCSFB 206-18 206 206-19 206-20

53/8

1375/16 SFB 206 2.4

SUCSFB 207-20 207-21 207-22 207 207-23

11/4

15/16

13/8

17/16

61/8

1567/16 SFB 207 3.8

20

30

35

W IJHGSLDB

BoltUsed

(in.)

Weight(lbs.)

Housing No.

5/8

167/8

22.2111/16

43.35/16

825/64

9.9125

23/8

6021/2

64

45/64

1811/4

31.821/16

52.43/8

9.525/64

9.923/4

7031/4

83

53/64

2111/4

31.823/8

60.31/2

1334/64

13.117/16

3731/4

8333/4

95

Bearing No.

SUC 201-8 202-10

SUC 204-12 204

SUC 206-18 206 206-19 206-20

SUC 207-20 207-21 207-22 207 207-23

11/2

38.1

11/2

38.1

17/8

47.6

250.8

E

123/64

34.3

123/64

34.3

137/64

40.2

153/64

46.4

Z

SUCSFB 205-14 205 205-16

7/8

143/4

1215/16 SFB 205 1.925

21/32

16.511/8

28.6113/16

46.03/8

9.525/64

9.911/8

2921/2

6423/4

70SUC 205-14 205 205-16

15/8

41.3127/64

36.2

1.2205 31.0

1.2205 31.0

1.5000 38.1

1.6890 42.9

Bi

1.3386 34.0

0.5000 12.7

0.5000 12.7

0.6260 15.9

0.6890 17.5

N

0.5630 14.3

0.7205 18.3

0.7205 18.3

0.8740 22.2

1.0000 25.4

M

0.7756 19.7

11/4

32

11/8

13/16

11/4S

B-type Seal

25/32

54.615/8

41.3215/16

74.61/2

1333/64

13.111/2

384

10245/8

118SUCSFB 210-31

210210-32

115/16

2S50 71/2

191SUC 210-31

210210-32

7/16 SFB 210 6.023/4

69.9 2.0315 51.6

0.7480 19.0

1.2835 32.6

53/64

21

54

CORR

OSI

ON

RES

ISTA

NT

SUCSPA & SUCSHA

UnitNo.

Shaft Dia.

d

(in. ) (mm)

Dimensions (in.)(mm)

H BiD-Min TapDepth

F-TappedHolesWBEA

Weight(lbs.)

HousingNo.

BearingNo.

M

1.220531.0

1/2

133/8"-16UNC

29/16

6511/2

382

50.827/8

73SUCSPA 201-8

202-101/25/8

15/16

33.3 SPA 204 1.5SUC 201-8202-10

0.720518.3

1.338634.0

1/2

133/8"-16UNC

213/16

7111/2

382

50.8376

SUCSPA 205-14205205-16

7/8

125 17/16

36.5 SPA 205 1.8SUC 205-14

205 205-16

0.775619.7

1.500038.1

5/8

167/16"-14UNC

33/8

8611/2

383

76.24

102

SUCSPA 206-18206206-19206-20

11/8

13/16

11/4S

30 111/16

42.9 SPA 206 2.9SUC 206-18

206206-19206-20

0.874022.2

1.689042.9

3/4

191/2"-13UNC

33/4

9517/8

4831/4

82.641/4

108

SUCSPA 207-20207-21207-22207207-23

11/4

15/16

13/8

17/16

3517/8

47.6 SPA 207 3.8

SUC 207-20207-21207-22207207-23

1.000025.4

1.220531.0

1/2

133/8"-16UNC

29/16

6511/2

382

50.827/8

73SUCSPA 204-12

2043/4

2015/16

33.3 SPA 204 1.4SUC 204-12204

0.720518.3

UnitNo.

Shaft Dia.

d

(in. ) (mm) A MKDLHCW

Weight(lbs.)

HousingNo.

BearingNo.

Bi N

0.874022.2

PF 3/4

-143/4

19.119/16

40233/64

64043/32

104

SUCSHA 206-18206206-19206-20

11/8

13/16

11/4S

30 35/32

80 SHA 206 1.91.500038.1

0.775619.7

PF 3/4

-14 3/4

19.119/16

40233/64

640329/32

99SUCSHA 205-14

205205-16

7/8

125 23/4

70 SHA 205 1.61.338634.0

0.626015.9

0.563014.3

0.689017.5

1.000025.4

PF 3/4

-143/4

19.119/16

4023/4

70049/16

116

SUCSHA 207-20207-21207-22207207-23

11/4

15/16

13/8

17/16

3535/8

92 SHA 207 2.61.689042.9

SUC 205-14205205-16

SUC 206-18206206-19206-20

SUC 207-20207-21207-22207207-23

SUCSHAHanger UnitsAll Stainless Steel

SUCSPATapped Base UnitsAll Stainless Steel• Set screw locking

Also available with locking collar

Dimensions (in.)(mm)

SUCSPA 208-24 11/2 115/16 45/8 31/2 17/8 315/16 1/2"-13 3/4 1.1890 1.9370 SUC 208-24 SPA 208 4.2208 40 49.2 117 88.9 48 100 UNC 19 30.2 49.2 208SUCSPA 209-27 111/16 21/8 5 33/4 2 41/4

1/2"-13 3/4 1.1890 1.9370 SUC 209-27209-28 13/4 54.0 127 95.3 51 108 UNC 19 30.2 49.2 209-28 SPA 209 5.3209 45 209

SUCSPA 210-31 115/16 21/4 51/2 4 2 45/85/8"-11 7/8 1.2835 2.0315 SUC 210-31

210 50 57.2 140 101.6 51 117 UNC 22 32.6 51.6 210 SPA 210 6.2210-32 2S 210-32

B-type Seal

B-type seal availablein all styles and sizes.

L3-type Seal

L3-type seal available inSUC units only. Limitedsizes. Consult IPTCI forspeed limitations.

B-type Seal

B-type seal availablein all styles and sizes.

L3-type Seal

L3-type seal available inSUC units only. Limitedsizes. Consult IPTCI forspeed limitations.

55

CORRO

SION

RESISTAN

T

All Stainless Steel

SUCSTRS & SUCST Take Up Units

BearingNo.

Shaft Dia.

d

(in. ) (mm)

Dimensions (in.)(mm)

F BSIPC

HousingNo.

BearingNo.

E Ak

Weight(lbs.)

21/2

6425/32

20125

19/16

401/2

12.7

SUCSTRS 207-20207-21207-22207207-23

11/4

15/16

13/8

17/16

35

5/16

7.9

SUC 207-20207-21207-22207207-23

STRS 20731/2

88.9

127/32

4725/32

207/8

2213/8

357/16

11.1SUCSTRS 205-14

205205-16

7/8

125

5/16

7.9SUC 205-14

205205-16

STRS 20525/8

66.7

21/2

6425/32

20125

19/16

401/2

12.7

SUCSTRS 206-18206206-19206-20

11/8

13/16

11/4S

30 5/16

7.9

SUC 206-18206206-19206-20

STRS 20631/2

88.9

4102

31/8

79

4102

1/4

6.4

1/4

6.4

1/4

6.4

W

415/16

125

329/32

99

415/16

125

L

13/8

35

13/32

28

13/8

35

H

376

217/32

64

376

Bi

1.689042.9

1.338634.0

1.500038.1

N

0.689017.5

0.563014.3

0.626015.9

M

1.000025.4

0.775619.7

0.874022.2

4.0

2.0

3.8

BearingNo.

Shaft Dia.

d

(in. ) (mm)

Dimensions (in.)(mm)

O BSQPG

HousingNo.

BearingNo.

E Ak

Weight(lbs.)

217/32

6455/64

22115/32

37217/32

641/2

13

SUCST 207-20207-21207-22207207-23

11/4

15/16

13/8

17/16

35

5/8

16

SUC 207-20207-21207-22207207-23

ST 20731/2

88.9

251

3/4

1911/4

32251

13/32

10SUCST 205-14

205205-16

7/8

125

5/8

16SUC 205-14

205205-16

ST 205376.2

21/4

5755/64

22115/32

3727/32

5613/32

10

SUCST 206-18206206-19206-20

11/8

13/16

11/4S

30 5/8

16

SUC 206-18206206-19206-20

ST 20631/2

88.9

41/32

102

31/2

89

41/32

102

17/32

13.5

17/32

13.5

17/32

13.5

W

53/32

129

313/16

97

47/16

113

J

115/32

37

11/4

32

115/32

37

L

13/16

30

15/16

24

13/32

28

R

251

13/8

35

111/16

43

H

31/16

78

27/16

62

23/4

70

N

0.689017.5

0.563014.3

0.626015.9

M

1.000025.4

0.775619.7

0.874022.2

Bi

1.689042.9

1.338634.0

1.500038.1

3.7

1.9

2.9

All Stainless Steel

• Set screw locking Also available with locking collar

SUCST • Wide Slot

SUCSTRS • Narrow Slot

SUCST 208-24208

11/2 3/4

19 ST 208 5.5

SUCST 209-27209-28209

111/16

13/43/4

19 ST 209 5.5

40

45

115/16

494

101.611/16

17.539/32

8319/64

29115/16

4939/32

835/8

16

115/16

494

101.611/16

17.539/32

8319/64

29115/16

4939/32

835/8

16

SUC 208-24208

SUC 209-27209-28209

41/2

114

419/32

117

1.937049.2

1.937049.2

0.748019.0

0.748019.0

1.189030.2

1.189030.2

521/32

144

521/32

144

15/16

33

13/8

35

27/32

56

21/4

57

315/32

88

37/16

87

115/32

3725/16

59115/16

494

101.611/16

17.5317/32

9033/8

8619/64

29115/16

4939/32

835/8

16SUCST 210-31

210210-32

115/16

2S50

3/4

19SUC 210-31

210210-32

ST 210 5.7419/32

1172.0315

51.60.7480

19.01.2835

32.657/8

149

B-type Seal

B-type seal availablein all styles and sizes.

L3-type Seal

L3-type seal available inSUC units only. Limitedsizes. Consult IPTCI forspeed limitations.

B-type Seal

B-type seal availablein all styles and sizes.

L3-type Seal

L3-type seal available inSUC units only. Limitedsizes. Consult IPTCI forspeed limitations.

56

CORR

OSI

ON

RES

ISTA

NT

Thermoplastic Pillow Blocks

0.563014.3

213/16

719/16

147/16

119/16

1411/2

3841/8

10551/2

140SUCTP 205-14

205205-16

7/8

125 17/16

36.53/8 TP 205 .8

SUC 205-14205205-16

1.338634.0

0.500012.7

219/32

669/16

147/16

119/16

1411/2

3833/4

955

127

SUCTP 201-8202-10204-12204

1/25/8

20

15/16

33.33/8 TP 204 .8

SUC 201-8202-10204-12204

1.220531.0

0.689017.5

311/16

9411/16

189/16

1423/32

18129/32

485

12765/8

168

SUCTP 207-20207-21207-22 207207-23

11/4

15/16

13/8

17/16

3517/8

47.61/2 TP 207 1.7

SUC 207-20207-21207-22207207-23

1.689042.9

0.748019.0

329/32

9925/32

209/16

1423/32

1821/8

5457/16

13771/4

184SUCTP 208-24

20811/2

40115/16

49.21/2 TP 208 2.2SUC 208-24

2081.9370

49.2

0.626015.9

319/64

8411/16

189/16

1423/32

18113/16

46411/16

119613/32

163

SUCTP 206-18206206-19 206-20

11/8

13/16

11/4S

30 111/16

42.91/2 TP 206 1.2

SUC 206-18206206-19206-20

1.500038.1

UnitNo.

Shaft Dia.

d

(in. ) (mm)

Dimensions (in.)(mm)

H NWGS1S2BEA

BoltUsed

(in.)

Weight(lbs.)

HousingNo.

BearingNo.

Bi

SUCTP with Stainless Steel Bearing Inserts

0.563014.3

213/16

719/16

147/16

119/16

1411/2

3841/8

10551/2

140CUCTP 205-14

205205-16

7/8

125 17/16

36.53/8 TP 205 .8

CUC 205-14205205-16

1.338634.0

0.500012.7

219/32

669/16

147/16

119/16

1411/2

3833/4

955

127CUCTP 204-12

2043/4 20

15/16

33.33/8 TP 204 .8CUC 204-12

2041.2205

31.0

0.689017.5

311/16

9411/16

189/16

1423/32

18129/32

485

12765/8

168

CUCTP 207-20207-22207207-23

11/4

13/8

17/16

3517/8

47.61/2 TP 207 1.7

CUC 207-20207-22207207-23

1.689042.9

0.748019.0

329/32

9925/32

209/16

1423/32

1821/8

5457/16

13771/4

184CUCTP 208-24

20811/2

40115/16

49.21/2 TP 208 2.2CUC 208-24

2081.9370

49.2

0.626015.9

319/64

8411/16

189/16

1423/32

18113/16

46411/16

119613/32

163

CUCTP 206-18206206-19206-20

11/8

13/16

11/4S

30 111/16

42.91/2 TP 206 1.2

CUC 206-18206206-19206-20

1.500038.1

CUCTP with Hard Chrome Coated Bearing Inserts

0.563014.3

213/16

719/16

147/16

119/16

1411/2

3841/8

10551/2

140BUCTP 205-14

205205-16

7/8

125 17/16

36.53/8 TP 205 .8

BUC 205-14205205-16

1.338634.0

0.500012.7

219/32

669/16

147/16

119/16

1411/2

3833/4

955

127

BUCTP 201-8202-10204-12204

1/25/83/4

20

15/16

33.33/8 TP 204 .8

BUC 201-8202-10204-12204

1.220531.0

0.689017.5

311/16

9411/16

189/16

1423/32

18129/32

485

12765/8

168

BUCTP 207-20207-22207207-23

11/4

13/8

17/16

3517/8

47.61/2 TP 207 1.7

BUC 207-20207-22207207-23

1.689042.9

0.748019.0

329/32

9925/32

209/16

1423/32

1821/8

5457/16

13771/4

184BUCTP 208-24

20811/2

40115/16

49.21/2 TP 208 2.2BUC 208-24

2081.9370

49.2

0.626015.9

0.775619.7

0.720518.3

1.000025.4

1.189030.2

0.874022.2

M

0.775619.7

0.720518.3

1.000025.4

1.189030.2

0.874022.2

0.775619.7

0.720518.3

1.000025.4

1.189030.2

0.874022.2

319/64

8411/16

189/16

1423/32

18113/16

46411/16

119613/32

163

BUCTP 206-18206206-19206-20

11/8

13/16

11/4S

30 111/16

42.91/2 TP 206 1.2

BUC 206-18206206-19206-20

1.500038.1

BUCTP with Black Oxide Bearing Inserts

3/4

3/4

With Set Screw LockOptional bearing inserts:

Stainless Steel-SUCTPHard Chrome Coated-CUCTPBlack Oxide-BUCTP

• End Caps Available for all styles.

L3-type Seal

L3-type seal available in SUCunits only. Limited sizes. ConsultIPTCI for speed limitations.

B-type Seal

B-type seal available in allstyles and sizes.

57

CORRO

SION

RESISTAN

T

B-type Seal

Thermoplastic Pillow BlocksWith Eccentric Locking Collar

Stainless Steel bearing insert-SNATP

0.563014.3

213/16

719/16

147/16

119/16

1411/2

3841/8

10551/2

140

7/8

125 17/16

36.53/8 TP 205 .9

SNA 205-14205205-16

1.622041.2

0.500012.7

219/32

669/16

147/16

119/16

1411/2

3833/4

955

1272015/16

33.33/8 TP 204 .9SNA 204-12

2041.5433

39.2

0.689017.5

311/16

9411/16

189/16

1423/32

18129/32

485

12765/8

168

11/4

13/8

17/1635

17/8

47.61/2 TP 207 1.9

SNA 207-20207-22207207-23

1.960649.8

0.748019.0

329/32

9925/32

209/16

1423/32

1821/8

5457/16

13771/4

18411/2

40115/16

49.21/2 TP 208 2.4SNA 208-24

2082.1220

53.9

0.626015.9

319/64

8411/16

189/16

1423/32

18113/16

46411/16

119613/32

16313/16

11/4S

30 111/16

42.91/2 TP 206 1.3

SNA 206206-19206-20

1.811046.0

UnitNo.

Shaft Dia.

d

(in. ) (mm)

Dimensions (in.)(mm)

H NWGS1S2BEA

BoltUsed

(in.)

Weight(lbs.)

HousingNo.

BearingNo.

Bi

SNATP with Stainless Steel Bearing Inserts

0.685017.4

0.669317.0

0.740218.8

0.842521.4

0.716518.2

M

3/4SNATP 204-12204

SNATP 205-14205205-16

SNATP 206206-19 206-20

SNATP 207-20207-22 207207-23

SNATP 208-24208

• Overview of corrosionresistant products – pg. 48

58

CORR

OSI

ON

RES

ISTA

NT

Thermoplastic 4-Bolt Flanges

0.775619.7

1.338634.0

17/16

36.57/16

1113/32

289/16

1443/64

1723/4

70SUCTF 205-14

205205-16

7/8

125 33/4

953/8 TF 205 .8

SUC 205-14205205-16

0.563014.3

0.720518.3

1.220531.0

17/16

36.57/16

1113/32

2817/32

1323/32

1821/2

64

SUCTF 201-8202-10204-12204

1/25/83/4

20

33/8

863/8 TF 204 .7

SUC 201-8202-10204-12204

0.500012.7

1.000025.4

1.689042.9

127/32

46.833/64

1313/8

355/8

1627/32

2135/8

92

SUCTF 207-20207-21207-22207207-23

11/4

15/16

13/8

17/16

35421/32

1187/16 TF 207 1.7

SUC 207-20207-21207-22207207-23

0.689017.5

1.189030.2

1.937049.2

23/32

53.235/64

14115/32

3721/32

1729/32

234

102SUCTF 208-24

20811/2

4051/8

1301/2 TF 208 2.2SUC 208-24

2080.7480

19.0

0.874022.2

1.500038.1

15/8

41.37/16

1111/4

329/16

143/4

1931/4

83

SUCTF 206-18206206-19206-20

11/8

13/16

11/4S

30 41/4

1083/8 TF 206 1.1

SUC 206-18206206-19206-20

0.626015.9

UnitNo.

Shaft Dia.

d

(in. ) (mm)

Dimensions (in.)(mm)

A MBiZSLGIE

BoltUsed

(in.)

Weight(lbs.)

HousingNo.

BearingNo.

N

SUCTF with Stainless Steel Bearing Inserts

0.775619.7

1.338634.0

17/16

36.57/16

1113/32

289/16

1443/64

1723/4

70CUCTF 205-14

205205-16

7/8

125 33/4

953/8 TF 205 .8

CUC 205-14205205-16

0.563014.3

0.720518.3

1.220531.0

17/16

36.57/16

1113/32

2817/32

1323/32

1821/2

64CUCTF 204-12

2043/4

2033/8

863/8 TF 204 .7CUC 204-12

2040.5000

12.7

1.000025.4

1.689042.9

127/32

46.833/64

1313/8

355/8

1627/32

2135/8

92

CUCTF 207-20207-22207207-23

11/4

13/8

17/16

35421/32

1187/16 TF 207 1.7

CUC 207-20207-22207207-23

0.689017.5

1.189030.2

1.937049.2

23/32

53.235/64

14115/32

3721/32

1729/32

234

102CUCTF 208-24

20811/2

4051/8

1301/2 TF 208 2.2CUC 208-24

2080.7480

19.0

0.874022.2

1.500038.1

15/8

41.37/16

1111/4

329/16

143/4

1931/4

83

CUCTF 206-18206206-19206-20

11/8

13/16

11/4S

30 41/4

1083/8 TF 206 1.1

CUC 206-18206206-19206-20

0.626015.9

CUCTF with Hard Chrome Coated Bearing Inserts

0.775619.7

1.338634.0

17/16

36.57/16

1113/32

289/16

1443/64

1723/4

70BUCTF 205-14

205205-16

7/8

125 33/4

953/8 TF 205 .8

BUC 205-14205205-16

0.563014.3

0.720518.3

1.220531.0

17/16

36.57/16

1113/32

2817/32

1323/32

1821/2

64

BUCTF 201-8202-10204-12204

1/25/83/4

20

33/8

863/8 TF 204 .7

BUC 201-8202-10204-12204

0.500012.7

1.000025.4

1.689042.9

127/32

46.833/64

1313/8

355/8

1627/32

2135/8

92

BUCTF 207-20207-22207207-23

11/4

13/8

17/16

35421/32

1187/16 TF 207 1.7

BUC 207-20207-32207207-23

0.689017.5

1.189030.2

1.937049.2

23/32

53.235/64

14215/32

3721/32

1729/32

234

102BUCTF 208-24

20811/2

4051/8

1301/2 TF 208 2.2BUC 208-24

2080.7480

19.0

0.874022.2

1.500038.1

15/8

41.37/16

1111/4

329/16

143/4

1931/4

83

BUCTF 206-18206206-19206-20

11/8

13/16

11/4 S

30 41/4

1083/8 TF 206 1.1

BUC 206-18206206-19206-20

0.626015.9

BUCTF with Black Oxide Bearing Inserts

With Set Screw LockOptional bearing inserts:

Stainless Steel-SUCTFHard Chrome Coated-CUCTFBlack Oxide-BUCTF

• End Caps Available for all styles.

L3-type Seal

L3-type seal available in SUCunits only. Limited sizes. ConsultIPTCI for speed limitations.

B-type Seal

B-type seal available in allstyles and sizes.

59

CORRO

SION

RESISTAN

T

B-type Seal

Thermoplastic 4-Bolt FlangesWith Eccentric Locking Collar

Stainless Steel bearing insert-SNATF

• Overview of corrosionresistant products – pg. 48

0.685017.4

1.622041.2

147/64

43.97/16

1113/32

289/16

1443/64

1723/4

70

7/8

125 33/4

953/8 TF 205 .9

SNA 205-14205205-16

0.563014.3

0.669317.0

1.543339.2

13/4

44.57/16

1113/32

2817/32

1323/32

1821/2

643/4

2033/8

863/8 TF 204 .8SNA 204-12

2040.5000

12.7

0.740218.8

1.960649.8

23/32

53.333/64

1313/8

355/8

1627/32

2135/8

92

11/4

13/8

17/16

35421/32

1187/16 TF 207 1.9

SNA 207-20207-22207207-23

0.689017.5

0.842521.4

2.122053.9

29/32

57.935/64

14115/32

3721/32

1729/32

234

10211/2

4051/8

1301/2 TF 208 2.4SNA 208-24

2080.7480

19.0

0.716518.2

1.811046.0

115/16

49.17/16

1111/4

329/16

143/4

1931/4

83

11/8

13/16

11/4S

30 41/4

1083/8 TF 206 1.2

SNA 206-18206206-19206-20

0.626015.9

UnitNo.

Shaft Dia.

d

(in. ) (mm)

Dimensions (in.)(mm)

A MBiZSLGIE

BoltUsed

(in.)

Weight(lbs.)

HousingNo.

BearingNo.

N

SNATF with Stainless Steel Bearing InsertsSNATF 204-12

204SNATF 205-14

205205-16

SNATF 206-18206206-19206-20

SNATF 207-20207-22207207-23

SNATF 208-24208

60

CORR

OSI

ON

RES

ISTA

NT

CORR

OSI

ON

RES

ISTA

NT

Thermoplastic 2-Bolt Flanges

0.563014.3

17/16

36.523/4

707/16

1115/32

2917/32

1343/64

17357/64

98.8SUCTFL 205-14

205205-16

7/8

1 25 51/8

1303/8 TFL 205 .7

SUC 205-14205205-16

1.338634.0

0.500012.7

121/64

33.7217/32

647/16

1111/32

267/16

1139/64

15317/32

89.7

SUCTFL 201-8202-10204-12204

1/25/83/4

20

47/16

1133/8 TFL 204 .5

SUC 201-8202-10204-12204

1.220531.0

0.689017.5

123/32

43.7317/32

9033/64

1319/32

335/8

1623/32

1851/8

130.2

SUCTFL 207-20207-21207-22207207-23

11/4

15/16

13/8

17/16

35615/32

1641/2 TFL 207 1.5

SUC 207-20207-21207-22207207-23

1.689042.9

0.748019.0

23/64

52.0315/16

10035/64

14115/32

3725/32

2027/32

21521/32

143.7SUCTFL 208-24

20811/2

4067/8

1751/2 TFL 208 2.0SUC 208-24

2081.9370

49.2

0.626015.9

139/64

40.935/32

807/16

1117/32

3117/32

133/4

19419/32

116.7

SUCTFL 206-18206206-19206-20

11/8

13/16

11/4S

30 513/16

1483/8 TFL 206 1.1

SUC 206-18206206-19206-20

1.500038.1

UnitNo.

Shaft Dia.

d

(in. ) (mm)

Dimensions (in.)(mm)

A NZBSLGIE

BoltUsed

(in.)

Weight(lbs.)

HousingNo.

BearingNo.

Bi

SUCTFL with Stainless Steel Bearing Inserts

0.563014.3

17/16

36.523/4

707/16

1115/32

2917/32

1343/64

17357/64

98.8CUCTFL 205-14

205205-16

7/8

125 51/8

1303/8 TFL 205 .7

CUC 205-14205205-16

1.338634.0

0.500012.7

121/64

33.7217/32

647/16

1111/32

267/16

1139/64

15317/32

89.7CUCTFL 204-12

2043/4

2047/16

1133/8 TFL 204 .5CUC 204-12

2041.2205

31.0

0.689017.5

123/32

43.7317/32

9033/64

1319/32

335/8

1623/32

1851/8

130.2

CUCTFL 207-20207-22207207-23

11/4

13/8

17/16

35615/32

1641/2 TFL 207 1.5

CUC 207-20207-22207207-23

1.689042.9

0.748019.0

23/64

52.0315/16

10035/64

14115/32

3725/32

2027/32

21521/32

143.7CUCTFL 208-24

20811/2

4067/8

1751/2 TFL 208 2.0CUC 208-24

2081.9370

49.2

0.626015.9

139/64

40.935/32

807/16

1117/32

3117/32

133/4

19419/32

116.7

CUCTFL 206-18206206-19206-20

11/8

13/16

11/4S

30 513/16

1483/8 TFL 206 1.1

CUC 206-18206206-19206-20

1.500038.1

CUCTFL with Hard Chrome Coated Bearing Inserts

0.563014.3

17/16

36.523/4

707/16

1115/32

2917/32

1343/64

17357/64

98.8BUCTFL 205-14

205205-16

7/8

1 2551/8

1303/8 TFL 205 .7

BUC 205-14205205-16

1.338634.0

0.500012.7

121/64

33.7217/32

647/16

1111/32

267/16

1139/64

15317/32

89.7

BUCTFL 201-8202-10204-12204

1/25/83/4

20

47/16

1133/8 TFL 204 .5

BUC 201-8202-10204-12204

1.220531.0

0.689017.5

123/32

43.7317/32

9033/64

1319/32

335/8

1623/32

1851/8

130.2

BUCTFL 207-20207-22207207-23

11/4

13/8

17/16

35615/32

1641/2 TFL 207 1.5

BUC 207-20207-22207207-23

1.689042.9

0.748019.0

23/64

52.0315/16

10035/64

14115/32

3725/32

2027/32

21521/32

143.7BUCTFL 208-24

20811/2

4067/8

1751/2 TFL 208 2.0BUC 208-24

2081.9370

49.2

0.626015.9

0.775619.7

0.720518.3

1.000025.4

1.189030.2

0.874022.2

M

0.775619.7

0.720518.3

1.000025.4

1.189030.2

0.874022.2

0.775619.7

0.720518.3

1.000025.4

1.189030.2

0.874022.2

139/64

40.935/32

807/16

1117/32

3117/32

133/4

19419/32

116.7

BUCTFL 206-18206206-19206-20

11/8

13/16

11/4S

30 513/16

1483/8 TFL 206 1.1

BUC 206-18206206-19206-20

1.500038.1

BUCTFL with Black Oxide Bearing Inserts

With Set Screw LockOptional bearing inserts:

Stainless Steel-SUCTFLHard Chrome Coated-CUCTFLBlack Oxide-BUCTFL

• End Caps Available for all styles.

L3-type Seal

L3-type seal available in SUCunits only. Limited sizes. ConsultIPTCI for speed limitations.

B-type Seal

B-type seal available in allstyles and sizes.

61

CORRO

SION

RESISTAN

T

B-type Seal

Thermoplastic 2-Bolt FlangesWith Eccentric Locking Collar

Stainless Steel bearing insert-SNATFL

• Overview of corrosionresistant products – pg. 48

0.563014.3

147/64

43.923/4

707/16

1115/32

2917/32

1343/64

17357/64

98.8SNATFL 205-14

205205-16

7/8

1 25 51/8

1303/8 TFL 205 .8

SNA 205-14205205-16

1.622041.2

0.500012.7

15/8

41.5217/32

647/16

1111/32

267/16

1139/64

15317/32

89.7SNATFL 204-12

2043/4

2047/16

1133/8 TFL 204 .6SNA 204-12

2041.5433

39.2

0.689017.5

163/64

50.3317/32

9033/64

1319/32

335/8

1623/32

1851/8

130.2

SNATFL 207-20207-22207207-23

11/4

13/8

17/16

35615/32

1641/2 TFL 207 1.7

SNA 207-20207-22207207-23

1.960649.8

0.748019.0

213/64

55.9315/16

10035/64

14115/32

3725/32

2027/32

21521/32

143.7SNATFL 208-24

20811/2

4067/8

1751/2 TFL 208 2.2SNA 208-24

2082.1220

53.9

0.626015.9

115/16

49.135/32

807/16

1117/32

3117/32

133/4

19419/32

116.7

SNATFL 206-18206206-19206-20

11/8

13/16

11/4S

30 513/16

1483/8 TFL 206 1.2

SNA 206-18206206-19206-20

1.811046.0

UnitNo.

Shaft Dia.

d

(in. ) (mm)

Dimensions (in.)(mm)

A NZBSLGIE

BoltUsed

(in.)

Weight(lbs.)

HousingNo.

BearingNo.

Bi

SNATFL with Stainless Steel Bearing Inserts

0.685017.4

0.669317.0

0.740218.8

0.842521.4

0.716518.2

M

62

CORR

OSI

ON

RES

ISTA

NT

CORR

OSI

ON

RES

ISTA

NT

Thermoplastic Tapped Base Pillow Blocks

0.775619.7

1/2

133/8"-16UNC

229/32

7419/16

402

50.8376

SUCTPA 205-14205205-16

7/8

125 17/16

36.5 TPA 205 .8SUC 205-14

205205-16

1.338634.0

0.720518.3

1/2

133/8"-16UNC

219/32

6613/8

352

50.827/8

73

SUCTPA 201-8202-10204-12204

1/25/83/4

20

15/16

33.3 TPA 204 .6SUC 201-8

202-10204-12204

1.220531.0

1.000025.4

41/64

161/2"-13UNC

33/4

9517/8

4831/4

82.645/16

110

SUCTPA 207-20207-21207-22207207-23

11/4

15/16

13/8

17/16

3517/8

47.6 TPA 207 1.7

SUC 207-20207-21207-22207207-23

1.689042.9

1.189030.2

41/64

161/2"-13UNC

4101

17/8

4831/2

88.943/4

120SUCTPA 208-24

20811/2

40115/16

49.2 TPA 208 2.1SUC 208-24208

1.937049.2

0.874022.2

1/2

137/16"-14UNC

35/16

84111/16

433

76.24

102

SUCTPA 206-18206206-19206-20

11/8

13/16

11/4S

30 111/16

42.9 TPA 206 1.2SUC 206-18

206206-19206-20

1.500038.1

UnitNo.

Shaft Dia.

d(in. ) (mm)

Dimensions (in.)(mm)

H MD-Min TapDepth

F-TappedHolesWBEA

Weight(lbs.)

HousingNo.

BearingNo.

Bi

SUCTPA with Stainless Steel Bearing Inserts

0.775619.7

1/2

133/8"-16UNC

229/32

7419/16

402

50.8376

CUCTPA 205-14205205-16

7/8

125

17/16

36.5 TPA 205 .8CUC 205-14

205205-16

1.338634.0

0.720518.3

1/2

133/8"-16UNC

219/32

6613/8

352

50.827/8

73CUCTPA 204-12

2043/4

2015/16

33.3 TPA 204 .6CUC 204-12204

1.220531.0

1.000025.4

41/64

161/2"-13UNC

33/4

9517/8

4831/4

82.645/16

110

CUCTPA 207-20207-22207207-23

11/4

13/8

17/16

3517/8

47.6 TPA 207 1.7CUC 207-20

207-22207207-23

1.689049.2

1.189030.2

41/46

161/2"-13UNC

4101

17/8

4831/2

88.943/4

120CUCTPA 208-24

20811/2

40115/16

49.2 TPA 208 2.1CUC 208-24208

1.937049.2

0.874022.2

1/2

137/16"-14UNC

35/16

84111/16

433

76.24

102

CUCTPA 206-18206206-19206-20

11/8

13/16

11/4S

30 111/16

42.9 TPA 206 1.2CUC 206-18

206206-19206-20

1.500038.1

CUCTPA with Hard Chrome Coated Bearing Inserts

0.775619.7

1/2

133/8"-16UNC

229/32

7419/16

402

50.8376

BUCTPA 205-14205205-16

7/8

125 17/16

36.5 TPA 205 .8BUC 205-14

205205-16

1.338634.0

0.720518.3

1/2

133/8"-16UNC

219/32

6613/8

352

50.827/8

73

BUCTPA 201-8202-10204-12204

1/25/83/4

20

15/16

33.3 TPA 204 .6BUC 201-8

202-10204-12204

1.220531.0

1.000025.4

41/64

161/2"-13UNC

33/4

9517/8

4831/4

82.645/16

110

BUCTPA 207-20207-22207207-23

11/4

13/8

17/16

3517/8

47.6 TPA 207 1.7BUC 207-20

207-22207207-23

1.689042.9

1.189030.2

41/64

161/2"-13UNC

4101

17/8

4831/2

88.943/4

120BUCTPA 208-24

20811/2

40115/16

49.2 TPA 208 2.1BUC 208-24208

1.937049.2

0.874022.2

1/2

137/16"-14UNC

35/16

84111/16

433

76.24

102

BUCTPA 206-18206206-19206-20

11/8

13/16

11/4S

30 111/16

42.9 TPA 206 1.2BUC 206-18

206206-19206-20

1.500038.1

BUCTPA with Black Oxide Bearing Inserts

With Set Screw LockOptional bearing inserts:

Stainless Steel-SUCTPAHard Chrome Coated-CUCTPABlack Oxide-BUCTPA

• End Caps Available for all styles.

L3-type Seal

L3-type seal available in SUCunits only. Limited sizes. ConsultIPTCI for speed limitations.

B-type Seal

B-type seal available in allstyles and sizes.

63

CORRO

SION

RESISTAN

T

Thermoplastic 3-Bolt Flanges

0.775619.7

1.338634.0

115/32

37.115/8

41.311/8

28.6113/16

46.025/64

9.9111/32

34SUCTFB 205-14

205205-16

7/8

125 23/4

705/16 TFB 205 .7

SUC 205-14205205-16

0.563014.3

0.720518.3

1.220531.0

15/16

33.311/2

38.17/8

22.2111/16

43.325/64

9.911/32

26

SUCTFB 201-8202-10204-12204

1/25/83/4

20

21/2

645/16 TFB 204 .6

SUC 201-8202-10204-12204

0.500012.7

1.000025.4

1.689042.9

149/64

45.02

50.811/4

31.823/8

60.333/64

13.117/16

37

SUCTFB 207-20207-21207-22207207-23

11/4

15/16

13/8

17/16

3533/4

957/16 TFB 207 1.5

SUC 207-20207-21207-22207207-23

0.689017.5

0.874022.2

1.500038.1

119/32

40.617/8

47.611/4

31.821/16

52.425/64

9.911/4

32

SUCTFB 206-18206206-19206-20

11/8

13/16

11/4S

30 31/4

835/16 TFB 206 1.1

SUC 206-18206206-19206-20

0.626015.9

UnitNo.

Shaft Dia.

d

(in. ) (mm)

Dimensions (in.)(mm)

B MBiZEJHSL

BoltUsed

(in.)

Weight(lbs.)

HousingNo.

BearingNo.

N

SUCTFB with Stainless Steel Bearing Inserts

0.775619.7

1.338634.0

115/32

37.115/8

41.311/8

28.6113/16

46.025/64

9.9111/32

34CUCTFB 205-14

205205-16

7/8

125 23/4

705/16 TFB 205 .7

CUC 205-14205205-16

0.563014.3

0.720518.3

1.220531.0

15/16

33.311/2

38.17/8

22.2111/16

43.325/64

9.911/32

26CUCTFB 204-12

2043/4

2021/2

645/16 TFB 204 .6CUC 204-12

2040.5000

12.7

1.000025.4

1.689042.9

149/64

45.02

50.811/4

31.823/8

60.333/64

13.117/16

37

CUCTFB 207-20207-22207207-23

11/4

13/8

17/16

3533/4

957/16 TFB 207 1.5

CUC 207-20207-22207207-23

0.689017.5

0.874022.2

1.500038.1

119/32

40.617/8

47.611/4

31.821/16

52.425/64

9.911/4

32

CUCTFB 206-18206206-19206-20

11/8

13/16

11/4S

30 31/4

835/16 TFB 206 1.1

CUC 206-18206206-19206-20

0.626015.9

CUCTFB with Hard Chrome Coated Bearing Inserts

0.775619.7

1.338634.0

115/32

37.115/8

41.311/8

28.6113/16

46.025/64

9.9111/32

34BUCTFB 205-14

205205-16

7/8

1 25 23/4

705/16 TFB 205 .7

BUC 205-14205205-16

0.563014.3

0.720518.3

1.220531.0

15/16

33.311/2

38.17/8

22.2111/16

43.325/64

9.911/32

26

BUCTFB 201-8202-10204-12204

1/25/83/4

20

21/2

645/16 TFB 204 .6

BUC 201-8202-10204-12204

0.500012.7

1.000025.4

1.689042.9

149/64

45.02

50.811/4

31.823/8

60.333/64

13.117/16

37

BUCTFB 207-20207-21207-22207207-23

11/4

115/16

13/8

17/16

3533/4

957/16 TFB 207 1.5

BUC 207-20207-21207-22207207-23

0.689017.5

0.874022.2

1.500038.1

119/32

40.6

21/32

16.5

19/32

15

3/4

19

45/64

18

I

21/32

16.5

19/32

15

3/4

19

45/64

18

21/32

16.5

19/32

15

3/4

19

45/64

1817/8

47.611/4

31.821/16

52.4

7/16

11

7/16

11

41/64

16

17/32

13

G

7/16

11

7/16

11

41/64

16

17/32

13

7/16

11

7/16

11

41/64

16

17/32

1325/64

9.911/4

32

21/2

64

27/16

62

31/2

89

376

D

21/2

64

27/16

62

31/2

89

376

21/2

64

27/16

62

31/2

89

376

BUCTFB 206-18206206-19206-20

11/8

13/16

11/4S

30 31/4

83

43/4

121

41/4

108

61/8

156

53/8

137

W

43/4

121

41/4

108

61/8

156

53/8

137

43/4

121

41/4

108

61/8

156

53/8

1375/16 TFB 206 1.1

BUC 206-18206206-19206-20

0.626015.9

BUCTFB with Black Oxide Bearing Inserts

With Set Screw LockOptional bearing inserts:

Stainless Steel-SUCTFBHard Chrome Coated-CUCTFBBlack Oxide-BUCTFB

• End Caps Available for all styles.

L3-type Seal

L3-type seal available in SUCunits only. Limited sizes. ConsultIPTCI for speed limitations.

B-type Seal

B-type seal available in allstyles and sizes.

64

CORR

OSI

ON

RES

ISTA

NT

With optional bearing inserts:Stainless Steel-SUCNPPHard Chrome Coated-CUCNPP• High shaft height• B-type seals• Available with locking

collar bearings.Please ask.

• Overview of corrosion resistant products – pg. 48

B-type Seal

Nickel Plated Pillow Blocks

UnitNo.

Shaft Dia.

d

(in. ) (mm)

Dimensions (in.)(mm)

H NWGS1S2BEA

BoltUsed

(in.)

Weight(lbs.)

HousingNo.

BearingNo.

Bi M

SUCNPP 201-8 202-10204-12204

1/25/83/4

NPP 204 1.615/16

33.33/8

SUCNPP 205-14205 205-16

7/8

117/16

36.53/8 NPP 205 2.0

SUCNPP 206-18206206-19206-20

11/8

13/16

11/4S

111/16 *1

42.91/2 NPP 206 3.0

SUCNPP 207-20207-21207-22207 207-23

11/4

15/16

13/8

17/16

17/8

47.61/2 NPP 207 4.0

SUCNPP 208-24208

11/2 115/16 *2

49.21/2 NPP 208 5.0

SUCNPP 209-27209-28209

111/16

13/421/8

54.01/2 NPP 209 5.7

20

25

30

35

40

45

0.500012.7

219/32

669/16

147/16

1111/16

1711/2

3833/4

955

127

0.563014.3

227/32

725/8

161/2

1311/16

1711/2

3841/8

10551/2

140

0.626015.9

319/64

8411/16

189/16

1413/16

2113/4

4443/4

12165/16

160

0.689017.5

311/16

943/4

199/16

147/8

22129/32

485

127617/32

166

0.748019.0

4102

13/16

219/16

147/8

22251

57/16

13771/8

181

0.748019.0

417/64

1097/8

2219/32

1513/16

2121/8

5453/4

14671/2

190

SUC 201-8 202-10204-12204

SUC 205-14205 205-16

SUC 206-18206206-19206-20

SUC 207-20207-21207-22207 207-23

SUC 208-24208

SUC 209-27209-28209

0.748019.0

433/64

11515/16

2423/32

1815/16

2421/4

5761/4

1598

203SUCNPP 210-31

210210-32

115/16

2S50 21/4

57.2SUC 210-31

210 210-32

5/8 NPP 210 6.8

0.874022.2

51/32

12811/16

2723/32

1815/16

2423/8

6067/8

17485/8

220SUCNPP 211-32

211-352

23/16

21/2

63.5SUC 211-32

211-355/8 NPP 211 8.8

1.000025.4

533/64

14011/16

2725/32

201

25.421/2

64711/32

187917/32

242SUCNPP 212-36

212-3921/4

27/16

23/4

69.8SUC 212-36

212-395/8 NPP 212 11.2

1.220531.0

1.338634.0

1.500038.1

1.689042.9

1.937049.2

1.937049.2

2.031551.6

2.189055.62.5630

65.1

0.720518.3

0.775619.7

1.000025.4

0.874022.2

1.189030.2

1.189030.2

1.283532.6

1.315033.41.5630

39.7

CUCNPP 204-12 204

3/4 NPP 204 1.615/16

33.33/8

CUCNPP 205-14205 205-16

7/8

117/16

36.53/8 NPP 205 2.0

CUCNPP 206-18206206-19206-20

11/8

13/16

11/4S

111/16 *1

42.91/2 NPP 206 3.0

CUCNPP 207-20207-22207 207-23

11/4

13/8

17/16

17/8

47.61/2 NPP 207 4.0

CUCNPP 208-24208

11/2 115/16 *2

49.21/2 NPP 208 5.0

20

25

30

35

40

0.500012.7

219/32

669/16

147/16

1111/16

1711/2

3833/4

955

127

0.563014.3

227/32

725/8

161/2

1311/16

1711/2

3841/8

10551/2

140

0.626015.9

319/64

8411/16

189/16

1413/16

2113/4

4443/4

12165/16

160

0.689017.5

311/16

943/4

199/16

147/8

22129/32

485

127617/32

166

0.748019.0

4102

13/16

219/16

147/8

22251

57/16

13771/8

181

CUC 204-12204

CUC 205-14205 205-16

CUC 206-18206206-19206-20

CUC 207-20207-22207 207-23

CUC 208-24208

1.220531.0

1.338634.0

1.500038.1

1.689042.9

1.937049.2

0.720518.3

0.775619.7

1.000025.4

0.874022.2

1.189030.2

CUCNPP with Hard Chrome Coated Bearing Inserts

SUCNPP with Stainless Steel Bearing Inserts

CUCNPP 209-27209-28209

111/16

13/421/8

54.01/2 NPP 209 5.7

450.7480

19.0417/64

1097/8

2219/32

1513/16

2121/8

5453/4

14671/2

190CUC 209-27

209-28209

0.748019.0

433/64

11515/16

2423/32

1815/16

2421/4

5761/4

1598

203CUCNPP 210-31

210210-32

115/16

2S50 21/4

57.2CUC 210-31

210 210-32

5/8 NPP 210 6.8

1.937049.2

2.031551.6

1.189030.2

1.283532.6

0.874022.2

51/32

12811/16

2723/32

1815/16

2423/8

6067/8

17485/8

220CUCNPP 211-32

211-352

23/16

21/2

63.5CUC 211-32

211-355/8 NPP 211 8.8

1.000025.4

533/64

14011/16

2725/32

201

25.421/2

64711/32

187917/32

242CUCNPP 212-36

212-3921/4

27/16

23/4

69.8CUC 212-36

212-395/8 NPP 212 11.2

2.189055.6

2.563065.1

1.315033.4

1.563039.7

CUCNPP 213-40 21/23

76.27/8 NPP 213 14.1

CUCNPP 215-47215-48

215/16

331/4

82.67/8 NPP 215 17.0

1.000025.4

61/32

15311/8

2813/16

2013/16

30211/16

6881/8

206103/4

273

1.311033.3

633/64

16611/8

291

25.411/4

31215/16

7581/2

2171013/16

275

CUC 213-40

CUC 215-47215-48

2.563065.1

3.063077.8

1.563039.7

1.752044.5

*1 Also available 15/8" *2 Also available 21/8"

65

CORRO

SION

RESISTAN

T

B-type Seal

CORRO

SION

RESISTAN

T

With Black Oxide Bearing Inserts-BUCNPP• High Shaft Height• B-type Seals

• Overview of corrosion resistant products – pg. 48

Nickel Plated Pillow Blocks

UnitNo.

Shaft Dia.

d

(in. ) (mm)

Dimensions (in.)(mm)

H NWGS1S2BEA

BoltUsed

(in.)

Weight(lbs.)

HousingNo.

BearingNo.

Bi M

BUCNPP 204-12204

3/4 NPP 204 1.615/16

33.33/8

BUCNPP 205-14205 205-16

7/8

117/16

36.53/8 NPP 205 2.0

BUCNPP 206-18206206-19206-20

11/8

13/16

11/4S

111/16*1

42.91/2 NPP 206 3.0

BUCNPP 207-20207-22207 207-23

11/4

13/8

17/16

17/8

47.61/2 NPP 207 4.0

BUCNPP 208-24208

11/2 115/16*2

49.21/2 NPP 208 5.0

BUCNPP 209-26209-27209-28209

15/8

111/16

13/4

21/8

54.01/2 NPP 209 5.7

20

25

30

35

40

45

0.500012.7

219/32

669/16

147/16

1111/16

1711/2

3833/4

955

127

0.563014.3

227/32

725/8

161/2

1311/16

1711/2

3841/8

10551/2

140

0.626015.9

319/64

8411/16

189/16

1413/16

2113/4

4443/4

12165/16

160

0.689017.5

311/16

943/4

199/16

147/8

22129/32

485

127617/32

166

0.748019.0

4102

13/16

219/16

147/8

22251

57/16

13771/8

181

0.748019.0

417/64

1097/8

2219/32

1513/16

2121/8

5453/4

14671/2

190

BUC 204-12204

BUC 205-14205 205-16

BUC 206-18206206-19206-20

BUC 207-20207-22207 207-23

BUC 208-24208

BUC 209-26209-27209-28209

0.748019.0

433/64

11515/16

2423/32

1815/16

2421/4

5761/4

1598

203

BUCNPP 210-30210-31210210-32

17/8

115/16

2S50

21/4

57.2

BUC 210-30210-31210210-32

5/8 NPP 210 6.8

0.874022.2

51/32

12811/16

2723/32

1815/16

2423/8

6067/8

17485/8

220BUCNPP 211-32

211211-35

2

23/16

55 21/2

63.5BUC 211-32

211211-35

5/8 NPP 211 8.8

1.000025.4

533/64

14011/16

2725/32

201

25.421/2

64711/32

187917/32

242BUCNPP 212-36

212212-39

21/4

27/16

60 23/4

69.8BUC 212-36

212212-39

5/8 NPP 212 11.2

1.220531.0

1.338634.0

1.500038.1

1.689042.9

1.937049.2

1.937049.2

2.031551.6

2.189055.6

2.563065.1

0.720518.3

0.775619.7

1.000025.4

0.874022.2

1.189030.2

1.189030.2

1.283532.6

1.315033.4

1.563039.7

BUCNPP 201-8202-10

1/25/8

NPP 203 1.513/16

30.23/8

BUCNPP 213-40 21/23

76.27/8 NPP 213 14.1

BUCNPP 215-47215-48

215/16

331/4

82.67/8 NPP 215 17.0

0.393710.0

223/64

6017/32

137/16

113/4

1917/16

3735/8

9247/8

124

1.000025.4

61/32

15311/8

2813/16

2013/16

30211/16

6881/8

206103/4

2731.3110

33.3633/64

16611/8

291

25.411/4

31215/16

7581/2

2171013/16

275

BUCW 201-8202-10

BUC 213-40

BUC 215-47215-48

1.023626.0

2.563065.13.0630

77.8

0.629916.0

1.563039.71.7520

44.5

*1 Also available 15/8"*2 Also available 21/8"

66

CORR

OSI

ON

RES

ISTA

NT

CORR

OSI

ON

RES

ISTA

NT

With optional bearing inserts:Stainless Steel-SUCNPPAHard Chrome Coated-CUCNPPA

0.775619.7

1/2

133/8"-16UNC

213/16

7111/2

382

50.8376

SUCNPPA 205-14205205-16

7/8

125 17/16

36.5 NPPA 205 1.6SUC 205-14

205205-16

1.338634.0

0.720518.3

1/2

133/8"-16UNC

29/16

6511/2

382

50.827/8

73

SUCNPPA 201-8202-10204-12204

1/25/83/4

20

15/16

33.3 NPPA 204 1.4SUC 201-8

202-10204-12204

1.220531.0

1.000025.4

3/4

191/2"-13UNC

33/4

9517/8

4831/4

82.641/4

108

SUCNPPA 207-20207-21207-22207207-23

11/4

15/16

13/8

17/16

3517/8

47.6 NPPA 207 3.6

SUC 207-20207-21207-22207207-23

1.689042.9

1.189030.2

3/4

191/2"-13UNC

315/16

10017/8

4831/2

88.945/8

117SUCNPPA 208-24

20811/2

40115/16

49.2 NPPA 208 4.0SUC 208-24208

1.937049.2

0.874022.2

5/8

167/16"-14UNC

33/8

8611/2

383

76.24

102

SUCNPPA 206-18206206-19206-20

11/8

13/16

11/4S

30 111/16

42.9 NPPA 206 2.6SUC 206-18

206206-19206-20

1.500038.1

1.189030.2

3/4

191/2"-13UNC

41/4

108251

33/4

95.35

127SUCNPPA 209-27

209-28209

111/16

13/4

4521/8

54.0 NPPA 209 5.0SUC 209-27

209-28209

1.937049.2

1.283532.6

7/8

225/8"-11UNC

45/8

117251

4101.6

51/2

140

SUCNPPA 210-31210210-32

115/16

2s50 21/4

57.2NPPA 210 5.9

SUC 210-31210210-32

2.031551.6

UnitNo.

Shaft Dia.

d(in. ) (mm)

Dimensions (in.)(mm)

H MD-Min TapDepth

F-TappedHolesWBEA

Weight(lbs.)

HousingNo.

BearingNo.

Bi

SUCNPPA with Stainless Steel Bearing Inserts

0.775619.7

1/2

133/8"-16UNC

213/16

7111/2

382

50.8376

CUCNPPA 205-14205205-16

7/8

125 17/16

36.5 NPPA 205 1.6CUC 205-14

205205-16

1.338634.0

0.720518.3

1/2

133/8"-16UNC

29/16

6511/2

382

50.827/8

73CUCNPPA 204-12

2043/4

2015/16

33.3 NPPA 204 1.4CUC 204-12204

1.220531.0

1.000025.4

3/4

191/2"-13UNC

33/4

9517/8

4831/4

82.641/4

108

CUCNPPA 207-20207-22207207-23

11/4

13/8

17/16

3517/8

47.6 NPPA 207 3.6CUC 207-20

207-22207207-23

1.689042.9

1.189030.2

3/4

191/2"-13UNC

315/16

10017/8

4831/2

88.945/8

117CUCNPPA 208-24

20811/2

40115/16

49.2 NPPA 208 4.0CUC 208-24208

1.937049.2

0.874022.2

5/8

167/16"-14UNC

33/8

8611/2

383

76.24

102

CUCNPPA 206-18206206-19206-20

11/8

13/16

11/4S

30 111/16

42.9 NPPA 206 2.6CUC 206-18

206206-19206-20

1.500038.1

CUCNPPA with Hard Chrome Coated Bearing Inserts

• B-type Seals• Available with locking

collar bearings.Please ask.

• Overview of corrosion resistant products – pg. 48

B-type Seal

1.189030.2

3/4

191/2"-13UNC

41/4

108251

33/4

95.35

127CUCNPPA 209-27

209-28209

111/16

13/4

4521/8

54.0 NPPA 209 5.0CUC 209-27

209-28209

1.937049.2

1.283532.6

7/8

225/8"-11UNC

45/8

117251

4101.6

51/2

140

CUCNPPA 210-31210210-32

115/16

2s50 21/4

57.2NPPA 210 5.9

CUC 210-31210210-32

2.031551.6

Nickel Plated Tapped Base Pillow Blocks

67

CORRO

SION

RESISTAN

T

With Black Oxide Bearing Inserts-BUCNPPA• B-type Seals • Overview of corrosion

resistant products – pg. 48B-type Seal

Nickel Plated Tapped Base Pillow Blocks

0.775619.7

1/2

133/8"-16UNC

213/16

7111/2

382

50.8376

BUCNPPA 205-14205205-16

7/8

125 17/16

36.5 NPPA 205 1.6BUC 205-14

205205-16

1.338634.0

0.720518.3

1/2

133/8"-16UNC

29/16

6511/2

382

50.827/8

73

BUCNPPA 201-8202-10204-12204

1/25/83/4

20

15/16

33.3 NPPA 204 1.4BUC 201-8

202-10204-12204

1.220531.0

1.000025.4

3/4

191/2"-13UNC

33/4

9517/8

4831/4

82.641/4

108

BUCNPPA 207-20207-22207207-23

11/4

13/8

17/16

3517/8

47.6 NPPA 207 3.6BUC 207-20

207-22207207-23

1.689042.9

1.189030.2

3/4

191/2"-13UNC

315/16

10017/8

4831/2

88.945/8

117BUCNPPA 208-24

20811/2

40115/16

49.2 NPPA 208 4.0BUC 208-24208

1.937049.2

0.874022.2

5/8

167/16"-14UNC

33/8

8611/2

383

76.24

102

BUCNPPA 206-18206206-19206-20

11/8

13/16

11/4S

30 111/16

42.9 NPPA 206 2.6BUC 206-18

206206-19206-20

1.500038.1

1.189030.2

3/4

191/2"-13UNC

41/4

108251

33/4

95.35

127

BUCNPPA 209-26209-27209-28209

111/16

13/4

45

21/8

54.0 NPPA 209 5.0BUC 209-26

209-27209-28209

1.937049.2

1.283532.6

7/8

225/8"-11UNC

45/8

117251

4101.6

51/2

140

BUCNPPA 210-30210-31210210-32

17/8

115/16

2S50

21/4

57.2 NPPA 210 5.9BUC 210-30

210-31210210-32

2.031551.6

UnitNo.

Shaft Dia.

d(in. ) (mm)

Dimensions (in.)(mm)

H MD-Min TapDepth

F-TappedHolesWBEA

Weight(lbs.)

HousingNo.

BearingNo.

Bi

15/8

68

CORR

OSI

ON

RES

ISTA

NT

B-type Seal

Nickel Plated 4-Bolt Flanges

1.338634.0

113/32

35.729/64

11.511/16

271/2

135/8

1623/4

70SUCNPF 205-14

205205-16

7/8

125 33/4

95 NPF 205 1.9SUC 205-14

205205-16

0.563014.3

1.220531.0

15/16

33.37/16

111

25.47/16

1119/32

1521/2

64

SUCNPF 201-8202-10204-12204

1/25/83/4

20

33/8

86 NPF 204 1.4SUC 201-8

202-10204-12204

0.500012.7

1.689042.9

13/4

44.433/64

13111/32

3419/32

153/4

1935/8

92

SUCNPF 207-20207-21207-22207207-23

11/4

15/16

13/8

17/16

35419/32

117 NPF 207 3.3

SUC 207-20207-21207-22207207-23

0.689017.5

1.937049.2

21/32

51.235/64

14113/32

3619/32

1553/64

214

102SUCNPF 208-24

20811/2

4051/8

130 NPF 208 4.2SUC 208-24208

0.748019.0

1.500038.1

119/32

40.233/64

1317/32

311/2

1345/64

1831/4

83

SUCNPF 206-18206206-19206-20

11/8

13/16

11/4S

30 41/4

108 NPF 206 2.4SUC 206-18

206206-19206-20

0.626015.9

1.937049.2

21/16

52.25/8

1611/2

385/8

1655/64

2241/8

105SUCNPF 209-27

209-28209

111/16

13/4

45513/32

137 NPF 209 5.2SUC 209-27

209-28209

0.748019.0

2.031551.6

25/32

54.65/8

1619/16

405/8

1655/64

2243/8

111SUCNPF 210-31

210210-32

115/16

2S50 55/8

143 NPF 210 5.6SUC 210-31

210210-32

0.748019.0

UnitNo.

Shaft Dia.

d

(in. ) (mm)

Dimensions (in.)(mm)

A BiZSLGIE

Weight(lbs.)

HousingNo.

BearingNo.

N

SUCNPF with Stainless Steel Bearing Inserts

1.338634.0

113/32

35.729/64

11.511/16

271/2

135/8

1623/4

70CUCNPF 205-14

205205-16

7/8

125 33/4

95 NPF 205 1.9CUC 205-14

205205-16

0.563014.3

1.220531.0

15/16

33.37/16

111

25.47/16

1119/32

1521/2

64CUCNPF 204-12

2043/4

2033/8

86 NPF 204 1.4CUC 204-12204

0.500012.7

1.689042.9

13/4

44.433/64

13111/32

3419/32

153/4

1935/8

92

CUCNPF 207-20207-22207207-23

11/4

13/8

17/16

35419/32

117 NPF 207 3.3CUC 207-20

207-22207207-23

0.689017.5

1.937049.2

21/32

51.235/64

14113/32

3619/32

1553/64

214

102CUCNPF 208-24

20811/2

4051/8

130 NPF 208 4.2CUC 208-24208

0.748019.0

1.500038.1

119/32

40.233/64

1317/32

311/2

1345/64

1831/4

83

CUCNPF 206-18206206-19206-20

11/8

13/16

11/4S

30 41/4

108 NPF 206 2.4CUC 206-18

206206-19206-20

0.626015.9

CUCNPF with Hard Chrome Coated Bearing Inserts

M

0.775619.7

0.720518.3

1.000025.4

1.189030.2

0.874022.2

1.189030.2

1.283532.6

0.775619.7

0.720518.3

1.000025.4

1.189030.2

0.874022.2

3/8

3/8

7/16

1/2

7/16

9/16

9/16

BoltUsed

(in.)

3/8

3/8

7/16

1/2

7/16

2.189055.6

25/16

58.443/64

17111/16

4323/32

1863/64

2551/8

130SUCNPF 211-32

211-352

23/16

63/8

162 NPF 211 7.7SUC 211-32211-35

0.874022.2

1.315033.4

5/8

2.563065.1

223/32

68.743/64

1717/8

4823/32

1819/64

2955/8

143SUCNPF 212-36

212-3921/4

27/16

67/8

175 NPF 212 9.4SUC 212-36212-39

1.000025.4

1.563039.7

5/8

With optional bearing inserts:Stainless Steel-SUCNPFHard Chrome Coated-CUCNPF• B-type seals• Available with locking

collar bearings.Please ask.

• Overview of corrosion resistant products – pg. 48

1.937049.2

21/16

52.25/8

1611/2

385/8

1655/64

2241/8

105CUCNPF 209-27

209-28209

111/16

13/4

45513/32

137 NPF 209 5.2CUC 209-27

209-28209

0.748019.0

2.031551.6

25/32

54.65/8

1619/16

405/8

1655/64

2243/8

111CUCNPF 210-31

210210-32

115/16

2S50 55/8

143 NPF 210 5.6CUC 210-31

210210-32

0.748019.0

1.189030.2

1.283532.6

9/16

9/16

2.189055.6

25/16

58.443/64

17111/16

4323/32

1863/64

2551/8

130CUCNPF 211-32

211-352

23/16

63/8

162 NPF 211 7.7CUC 211-32211-35

0.874022.2

1.315033.4

5/8

2.563065.1

223/32

68.743/64

1717/8

4823/32

1819/64

2955/8

143CUCNPF 212-36

212-3921/4

27/16

67/8

175 NPF 212 9.4CUC 212-36212-39

1.000025.4

1.563039.7

5/8

2.563065.1

23/4

69.743/64

17131/32

507/8

2213/16

3057/8

143CUCNPF 213-40 21/273/8

187 NPF 213 12.9CUC 213-401.000025.4

1.563039.7

5/8

3.063077.8

33/32

78.53/4

1927/32

567/8

22111/32

3461/4

159CUCNPF 215-47

215-48215/16

377/8

200 NPF 215 15.0CUC 215-47215-48

1.311033.3

1.752044.5

11/16

69

CORRO

SION

RESISTAN

T

B-type Seal

With Black Oxide Bearing Inserts-BUCNPF• B-type seals • Overview of corrosion

resistant products – pg. 48

Nickel Plated 4-Bolt Flanges

1.338634.0

113/32

35.729/64

11.511/16

271/2

135/8

1623/4

70BUCNPF 205-14

205205-16

7/8

125 33/4

95 NPF 205 1.9BUC 205-14

205205-16

0.563014.3

1.023626.0

19/32

32.77/16

1113/32

283/8

1021/32

16.721/8

54BUCNPF 201-8

202-101/25/8

376 NPF 203 1.2BUCW 201-8

202-100.3937

10.0

1.689042.9

13/4

44.433/64

13111/32

3419/32

153/4

1935/8

92

BUCNPF 207-20207-22207207-23

11/4

13/8

17/16

35419/32

117 NPF 207 3.3BUC 207-20

207-22207207-23

0.689017.5

1.937049.2

21/32

51.235/64

14113/32

3619/32

1553/64

214

102BUCNPF 208-24

20811/2

4051/8

130 NPF 208 4.2BUC 208-24208

0.748019.0

1.500038.1

119/32

40.233/64

1317/32

311/2

1345/64

1831/4

83

BUCNPF 206-18206206-19206-20

11/8

13/16

11/4S

30 41/4

108 NPF 206 2.4BUC 206-18

206206-19206-20

0.626015.9

1.937049.2

21/16

52.25/8

1611/2

385/8

1655/64

2241/8

105

BUCNPF 209-26209-27209-28209

15/8

111/16

13/4

45

513/32

137 NPF 209 5.2BUC 209-26

209-27209-28209

0.748019.0

2.031551.6

25/32

54.65/8

1619/16

405/8

1655/64

2243/8

111

BUCNPF 210-30210-31210210-32

17/8

115/16

2S50

55/8

143 NPF 210 5.6BUC 210-30

210-31210210-32

0.748019.0

UnitNo.

Shaft Dia.

d

(in. ) (mm)

Dimensions (in.)(mm)

A BiZSLGIE

Weight(lbs.)

HousingNo.

BearingNo.

N M

0.775619.7

0.629916.0

1.000025.4

1.189030.2

0.874022.2

1.189030.2

1.283532.6

3/8

3/8

7/16

1/2

7/16

9/16

9/16

BoltUsed

(in.)

2.189055.6

25/16

58.443/64

17111/16

4323/32

1863/64

2551/8

130BUCNPF 211-32

211211-35

2

23/16

55 63/8

162 NPF 211 7.7BUC 211-32

211211-35

0.874022.2

1.315033.4

5/8

2.563065.1

223/32

68.743/64

1717/8

4823/32

1819/64

2955/8

143BUCNPF 212-36

212212-39

21/4

27/16

60 67/8

175 NPF 212 9.4BUC 212-36

212212-39

1.000025.4

1.563039.7

5/8

1.220531.0

15/16

33.37/16

111

25.47/16

1119/32

1521/2

64BUCNPF 204-12

2043/4

2033/8

86 NPF 204 1.4BUC 204-12204

0.500012.7

0.720518.3

3/8

2.563065.1

23/4

69.743/64

17131/32

507/8

2213/16

3057/8

143BUCNPF 213-40 21/273/8

187 NPF 213 12.9BUC 213-401.000025.4

1.563039.7

5/8

3.063077.8

33/32

78.53/4

1927/32

567/8

22111/32

3461/4

159BUCNPF 215-47

215-48215/16

377/8

200 NPF 215 15.0BUC 215-47215-48

1.311033.3

1.752044.5

11/16

70

CORR

OSI

ON

RES

ISTA

NT

With optional bearing inserts:Stainless Steel-SUCNPFLHard Chrome Coated-CUCNPFL

B-type Seal

Nickel Plated 2-Bolt Flanges

1.338634.0

211/16

6815/32

11.911/16

271/2

135/8

16357/64

98.8SUCNPFL 205-14

205205-16

7/8

125 51/8

130 NPFL 205 1.5SUC 205-14

205205-16

0.563014.3

1.220531.0

23/8

6025/64

10125

7/16

1119/32

15317/32

89.7

SUCNPFL 201-8202-10204-12204

1/25/83/4

20

47/16

113 NPFL 204 1.0SUC 201-8

202-10204-12204

0.500012.7

1.689042.9

317/32

9033/64

13111/32

349/16

143/4

1951/8

130.2

SUCNPFL 207-20207-21207-22207207-23

11/4

15/16

13/8

17/16

35611/32

161 NPFL 207 2.9

SUC 207-20207-21207-22207207-23

0.689017.5

1.937049.2

315/16

10033/64

13113/32

369/16

1453/64

21521/32

143.7SUCNPFL 208-24

20811/2

4067/8

175 NPFL 208 3.5SUC 208-24208

0.748019.0

1.500038.1

35/32

8015/32

11.917/32

311/2

1345/64

18419/32

116.7

SUCNPFL 206-18206206-19206-20

11/8

13/16

11/4S

30 513/16

148 NPFL 206 2.2SUC 206-18

206206-19206-20

0.626015.9

1.937049.2

41/4

10819/32

1511/2

3819/32

1555/64

22527/32

148.4SUCNPFL 209-27

209-28209

111/16

13/4

45713/32

188 NPFL 209 4.4SUC 209-27

209-28209

0.748019.0

2.031551.6

417/32

11519/32

1519/16

4019/32

1555/64

2263/16

157SUCNPFL 210-31

210210-32

115/16

2S50 73/4

197 NPFL 210 5.1SUC 210-31

210210-32

0.748019.0

UnitNo.

Shaft Dia.

d

(in. ) (mm)

Dimensions (in.)(mm)

A BiBSLGIE

Weight(lbs.)

HousingNo.

BearingNo.

N

SUCNPFL with Stainless Steel Bearing Inserts

1.338634.0

211/16

6815/32

11.911/16

271/2

135/8

16357/64

98.8CUCNPFL 205-14

205205-16

7/8

125 51/8

130 NPFL 205 1.5CUC 205-14

205205-16

0.563014.3

1.220531.0

23/8

6025/64

10125

7/16

1119/32

15317/32

89.7CUCNPFL 204-12

2043/4

2047/16

113 NPFL 204 1.0CUC 204-12204

0.500012.7

1.689042.9

317/32

9033/64

13111/32

349/16

143/4

1951/8

130.2

CUCNPFL 207-20207-22207207-23

11/4

13/8

17/16

35611/32

161 NPFL 207 2.9CUC 207-20

207-22207207-23

0.689017.5

1.937049.2

315/16

10033/64

13113/32

369/16

1453/64

21521/32

143.7CUCNPFL 208-24

20811/2

4067/8

175 NPFL 208 3.5CUC 208-24208

0.748019.0

1.500038.1

35/32

8015/32

11.917/32

311/2

1345/64

18419/32

116.7

CUCNPFL 206-18206206-19206-20

11/8

13/16

11/4S

30 513/16

148 NPFL 206 2.2CUC 206-18

206206-19206-20

0.626015.9

CUCNPFL with Hard Chrome Coated Bearing Inserts

M

0.775619.7

0.720518.3

1.000025.4

1.189030.2

0.874022.2

1.189030.2

1.283532.6

0.775619.7

0.720518.3

1.000025.4

1.189030.2

0.874022.2

3/8

5/16

7/16

7/16

3/8

1/2

1/2

BoltUsed

(in.)

3/8

5/16

7/16

7/16

3/8

2.189055.6

51/8

13041/64

16.3111/16

4323/32

1863/64

2571/4

184SUCNPFL 211-32

211-352

23/16

813/16

224 NPFL 211 7.3SUC 211-32211-35

0.874022.2

1.315033.4

9/16

2.563065.1

51/2

14041/64

16.317/8

4823/32

1819/64

29715/16

201.6SUCNPFL 212-36

212-3921/4

27/16

927/32

250 NPFL 212 9.5SUC 212-36212-39

1.000025.4

1.563039.7

9/16

115/32

37.3

15/16

33.3

13/4

44.5

250.8

119/32

40.5

21/16

52.4

25/32

54.8

Z

115/32

37.3

15/16

33.3

13/4

44.5

250.8

119/32

40.5

25/16

58.7223/32

69.1

• B-type seals• Available with locking

collar bearings.Please ask.

• Overview of corrosion resistant products – pg. 48

1.937049.2

41/4

10819/32

1511/2

3819/32

1555/64

22527/32

148.4CUCNPFL 209-27

209-28209

111/16

13/4

45713/32

188 NPFL 209 4.4CUC 209-27

209-28209

0.748019.0

2.031551.6

417/32

11519/32

1519/16

4019/32

1555/64

2263/16

157CUCNPFL 210-31

210210-32

115/16

2S50 73/4

197 NPFL 210 5.1CUC 210-31

210210-32

0.748019.0

1.189030.2

1.283532.6

1/2

1/2

21/16

52.4

25/32

54.8

71

CORRO

SION

RESISTAN

T

With Black Oxide Bearing Inserts-BUCNPFL• B-type Seals • Overview of corrosion

resistant products – pg. 48

UnitNo.

Shaft Dia.

d

(in. ) (mm)

Dimensions (in.)(mm)

BUCNPFL 201-8202-10

1/25/8

413/32

1123

76.243/64

177/16

1131/32

2525/64

1023/8

6015/16

33.30.3937

10.05/16 NPFT 203 0.9

BUCNPFL 204-12204

3/4 47/16

1135/16 NPFL 204 1.0

BUCNPFL 205-14205205-16

7/8

151/8

1303/8 NPFL 205 1.5

BUCNPFL 207-20207-22207207-23

11/4

13/8

17/16

611/32

1617/16 NPFL 207 2.9

BUCNPFL 208-24208

11/2 67/8

1757/16 NPFL 208 3.5

BUCNPFL 206-18206206-19206-20

11/8

13/16

11/4S

513/16

1483/8 NPFL 206 2.2

20

25

35

40

30

A NZBSLGIE

BoltUsed

(in.)

Weight(lbs.)

HousingNo.

0.500012.7

15/16

33.323/8

6025/64

10125

7/16

1119/32

15317/32

89.7

0.563014.3

115/32

37.3211/16

6815/32

11.911/16

271/2

135/8

16357/64

98.8

0.689017.5

13/4

44.5317/32

9033/64

13111/32

349/16

143/4

1951/8

130.2

0.748019.0

250.8

315/16

10033/64

13113/32

369/16

1453/64

21521/32

143.7

0.626015.9

119/32

40.535/32

8015/32

11.917/32

311/2

1345/64

18419/32

116.7

BearingNo.

BUCW 201-8202-10

BUC 204-12204

BUC 205-14205205-16

BUC 207-20207-22207207-23

BUC 208-24208

BUC 206-18206206-19206-20

0.748019.0

21/16

52.441/4

10819/32

1511/2

3819/32

1555/64

22527/32

148.4

BUCNPFL 209-26209-27209-28209

15/8

111/16

13/4

45

713/32

188

BUC 209-26209-27209-28209

1/2 NPFL 209 4.4

0.748019.0

25/32

54.8417/32

11519/32

1519/16

4019/32

1555/64

2263/16

157

BUCNPFL 210-30210-31210210-32

17/8

115/16

2S50

73/4

197

BUC 210-30210-31210210-32

1/2 NPFL 210 5.1

0.874022.2

25/16

58.751/8

13041/64

16.3111/16

4323/32

1863/64

2571/4

184BUCNPFL 211-32

211211-35

2

23/16

55 813/16

224BUC 211-32

211211-35

9/16 NPFL 211 7.3

1.220531.0

1.023626.0

1.338634.0

1.689042.9

1.937049.2

1.500038.1

1.937049.2

2.031551.6

2.189055.6

Bi

0.720518.3

0.629916.0

1.000025.4

0.775619.7

1.189030.2

0.874022.2

1.189030.2

1.283532.6

1.315033.4

M

1.000025.4

223/32

69.151/2

14041/64

16.317/8

4823/32

1819/64

29715/16

201.6BUCNPFL 212-36

212212-39

21/4

27/16

60 927/32

250BUC 212-36

212212-39

9/16 NPFL 212 9.52.563065.1

1.563039.7

B-type Seal

Nickel Plated 2-Bolt Flanges

72

CORR

OSI

ON

RES

ISTA

NT

Nickel Plated Take Up Units

SUCNPT with Stainless Steel Bearing Inserts

27/16

6215/16

2411/4

3231/2

893

76.217/32

13.53/4

1911/4

32SUCNPT 205-14

205205-16

7/8

125

13/32

10 NPT 205 1.9SUC 205-14

205205-16

13/8

35

213/32

6113/16

2111/4

3231/2

893

76.217/32

13.53/4

1911/4

32

SUCNPT 201-8202-10204-12204

1/25/83/4

20

13/32

10 NPT 204 1.7SUC 201-8

202-10204-12204

15/16

33

31/16

7813/16

30115/32

3741/32

10231/2

88.917/32

13.555/64

22115/32

37

SUCNPT 207-20207-21207-22207207-23

11/4

15/16

13/8

17/16

35

1/2

13 NPT 207 3.5

SUC 207-20207-21207-22207207-23

251

23/4

7013/32

28115/32

3741/32

10231/2

88.917/32

13.555/64

22115/32

37

SUCNPT 206-18206206-19206-20

11/8

13/16

11/4S

30 13/32

10 NPT 206 2.9SUC 206-18

206206-19206-20

111/16

43

UnitNo.

Shaft Dia.

d

(in. ) (mm) G H

1.338634.0

1.220531.0

1.689042.9

1.500038.1

Bi

0.563014.3

0.500012.7

0.689017.5

0.626015.9

N

0.775619.7

0.720518.3

1.000025.4

0.874022.2

MLJAEkSQ

Weight(lbs.)

HousingNo.

BearingNo.

R

313/16

97

311/16

94

53/32

129

47/16

113

W

251

251

217/32

64

21/4

57

B

251

251

217/32

64

27/32

56

P

5/8

16

315/32

8815/16

33115/16

4941/2

1144

101.611/16

17.519/64

29115/16

49SUCNPT 208-24

20811/2

405/8

16 NPT 208 5.5SUC 208-24208

27/32

561.9370

49.20.7480

19.01.1890

30.2521/32

14439/32

8339/32

833/4

19

37/16

8713/8

35115/16

49419/32

1174

101.611/16

17.519/64

29115/16

49SUCNPT 209-27

209-28209

111/16

13/4

45

5/8

16 NPT 209 5.5SUC 209-27

209-28209

21/4

571.9370

49.20.7480

19.01.1890

30.2521/32

14439/32

8339/32

833/4

19

317/32

90115/32

37115/16

49419/32

1174

101.611/16

17.519/64

29115/16

49SUCNPT 210-31

210210-32

115/16

2S50

5/8

16 NPT 210 5.7SUC 210-31

210210-32

25/16

592.0315

51.60.7480

19.01.2835

32.657/8

14933/8

8639/32

833/4

19

43/16

10611/2

38217/32

6453/4

14651/8

130.211/16

2713/8

35217/32

64SUCNPT 211-32

211-352

23/16

3/4

19 NPT 211 8.8SUC 211-32211-35

29/16

652.1890

55.60.8740

22.21.3150

33.4623/32

17133/4

9541/32

102125

411/16

119121/32

42217/32

6453/4

14651/8

130.211/16

2713/8

35217/32

64SUCNPT 212-36

212-3921/4

27/16

3/4

19 NPT 212 10.6SUC 212-36212-39

215/16

752.5630

65.11.0000

25.41.5630

39.775/8

19441/32

10241/32

10211/4

32

5/8

16

5/8

16

5/8

16

CUCNPT with Hard Chrome Coated Bearing Inserts

27/16

6215/16

2411/4

3231/2

893

76.217/32

13.53/4

1911/4

32CUCNPT 205-14

205205-16

7/8

125

13/32

10 NPT 205 1.9CUC 205-14

205205-16

13/8

35

213/32

6113/16

2111/4

3231/2

893

76.217/32

13.53/4

1911/4

32CUCNPT 204-12

2043/4

2013/32

10 NPT 204 1.7CUC 204-12204

15/16

33

31/16

7813/16

30115/32

3741/32

10231/2

88.917/32

13.555/64

22115/32

37

CUCNPT 207-20207-22207207-23

11/4

13/8

17/16

351/2

13 NPT 207 3.5CUC 207-20

207-22207207-23

251

23/4

7013/32

28115/32

3741/32

10231/2

88.917/32

13.555/64

22115/32

37

CUCNPT 206-18206206-19206-20

11/8

13/16

11/4S

30 13/32

10 NPT 206 2.9CUC 206-18

206206-19206-20

111/16

43

1.338634.0

1.220531.0

1.689042.9

1.500038.1

0.563014.3

0.500012.7

0.689017.5

0.626015.9

0.775619.7

0.720518.3

1.000025.4

0.874022.2

313/16

97

311/16

94

53/32

129

47/16

113

251

251

217/32

64

21/4

57

251

251

217/32

64

27/32

56

5/8

16

315/32

8815/16

33115/16

4941/2

1144

101.611/16

17.519/64

29115/16

49CUCNPT 208-24

20811/2

405/8

16 NPT 208 5.5CUC 208-24208

27/32

561.9370

49.20.7480

19.01.1890

30.2521/32

14439/32

8339/32

833/4

19

5/8

16

5/8

16

5/8

16

O

Wide slot with optional bearing inserts: Stainless Steel-SUCNPTHard Chrome Coated-CUCNPT

• B-type Seals• Available with locking

collar bearings.Please ask.

• Overview of corrosion resistant products – pg. 48 B-type Seal

CUCNPT 209-27209-28209

111/16

13/43/4

19 NPT 209 5.545

115/16

494

101.611/16

17.539/32

8319/64

29115/16

4939/32

835/8

16CUC 209-27

209-28209

419/32

1171.9370

49.20.7480

19.01.1890

30.2521/32

14413/8

3521/4

5737/16

87

115/32

3725/16

59115/16

494

101.611/16

17.5317/32

9033/8

8619/64

29115/16

4939/32

835/8

16CUCNPT 210-31

210210-32

115/16

2S50

3/4

19CUC 210-31

210210-32

NPT 210 5.7419/32

1172.0315

51.60.7480

19.01.2835

32.657/8

149

43/16

10611/2

38217/32

6453/4

14651/8

130.211/16

2713/8

35217/32

64CUCNPT 211-32

211-352

23/16

3/4

19 NPT 211 8.8CUC 211-32211-35

29/16

652.1890

55.60.8740

22.21.3150

33.4623/32

17133/4

9541/32

102125

513/32

137123/32

4423/4

7069/16

167515/16

150.811/16

27139/64

4123/4

70CUCNPT 213-40 21/213/16

21 NPT 213 15.2CUC 213-4037/16

872.5630

65.11.0000

25.41.5630

39.7813/16

22443/4

12143/8

11111/4

32

51/2

14017/8

4823/4

7069/16

167515/16

150.811/16

27139/64

4123/4

70CUCNPT 215-47

215-48215/16

313/16

21 NPT 215 15.9CUC 215-47215-48

35/8

923.0630

77.81.3110

33.31.7520

44.591/8

23243/4

12143/8

11111/4

32

411/16

119121/32

42217/32

6453/4

14651/8

130.211/16

2713/8

35217/32

64CUCNPT 212-36

212-3921/4

27/16

3/4

19 NPT 212 10.6CUC 212-36212-39

215/16

752.5630

65.11.0000

25.41.5630

39.775/8

19441/32

10241/32

10211/4

32

Dimensions (in.)(mm)

73

CORRO

SION

RESISTAN

T

27/16

6215/16

2411/4

3231/2

893

76.217/32

13.53/4

1911/4

32BUCNPT 205-14

205205-16

7/8

125

13/32

10 NPT 205 1.9BUC 205-14

205205-16

13/8

35

213/32

6113/16

2111/4

3231/2

893

76.217/32

13.53/4

1911/4

32

BUCNPT 201-8202-10204-12204

1/25/83/4

20

13/32

10 NPT 204 1.7BUC 201-8

202-10204-12204

15/16

33

31/16

7813/16

30115/32

3741/32

10231/2

88.917/32

13.555/64

22115/32

37

BUCNPT 207-20207-22207207-23

11/4

13/8

17/16

351/2

13 NPT 207 3.5BUC 207-20

207-22207207-23

251

23/4

7013/32

28115/32

3741/32

10231/2

88.917/32

13.555/64

22115/32

37

BUCNPT 206-18206206-19206-20

11/8

13/16

11/4S

30 13/32

10 NPT 206 2.9BUC 206-18

206206-19206-20

111/16

43

UnitNo.

Shaft Dia.

d

(in. ) (mm)

Dimensions (in.)(mm)

G H

1.338634.0

1.220531.0

1.689042.9

1.500038.1

Bi

0.563014.3

0.500012.7

0.689017.5

0.626015.9

N

0.775619.7

0.720518.3

1.000025.4

0.874022.2

MLJAEkSQ

Weight(lbs.)

HousingNo.

BearingNo.

R

313/16

97

311/16

94

53/32

129

47/16

113

W

251

251

217/32

64

21/4

57

B

251

251

217/32

64

27/32

56

P

5/8

16

315/32

8815/16

33115/16

4941/2

1144

101.611/16

17.519/64

29115/16

49BUCNPT 208-24

20811/2

405/8

16 NPT 208 5.5BUC 208-24208

27/32

561.9370

49.20.7480

19.01.1890

30.2521/32

14439/32

8339/32

833/4

19

37/16

8713/8

35115/16

49419/32

1174

101.611/16

17.519/64

29115/16

49

BUCNPT 209-26209-27209-28209

15/8

111/16

13/4

45

5/8

16 NPT 209 5.5BUC 209-26

209-27209-28209

21/4

571.9370

49.20.7480

19.01.1890

30.2521/32

14439/32

8339/32

833/4

19

317/32

90115/32

37115/16

49419/32

1174

101.611/16

17.519/64

29115/16

49

BUCNPT 210-30210-31210210-32

17/8

115/16

2S50

5/8

16 NPT 210 5.7BUC 210-30

210-31210210-32

25/16

592.0315

51.60.7480

19.01.2835

32.657/8

14933/8

8639/32

833/4

19

43/16

10611/2

38217/32

6453/4

14651/8

130.211/16

2713/8

35217/32

64BUCNPT 211-32

211211-35

2

23/16

553/4

19 NPT 211 8.8BUC 211-32

211211-35

29/16

652.1890

55.60.8740

22.21.3150

33.4623/32

17133/4

9541/32

102125

513/32

137123/32

4423/4

7069/16

167515/16

150.811/16

27139/64

4123/4

70BUCNPT 213-40 21/213/16

21 NPT 213 15.2BUC 213-4037/16

872.5630

65.11.0000

25.41.5630

39.7813/16

22443/4

12143/8

11111/4

32

51/2

14017/8

4823/4

7069/16

167515/16

150.811/16

27139/64

4123/4

70BUCNPT 215-47

215-48215/16

313/16

21 NPT 215 15.9BUC 215-47215-48

35/8

923.0630

77.81.3110

33.31.7520

44.591/8

23243/4

12143/8

11111/4

32

411/16

119121/32

42217/32

6453/4

14651/8

130.211/16

2713/8

35217/32

64BUCNPT 212-36

212212-39

21/4

27/16

603/4

19 NPT 212 10.6BUC 212-36

212212-39

215/16

752.5630

65.11.0000

25.41.5630

39.775/8

19441/32

10241/32

10211/4

32

5/8

16

5/8

16

5/8

16

O

Nickel Plated Take Up Units

B-type Seal

Wide slot with Black Oxidebearing insert-BUCNPT• B-type Seals • Overview of corrosion

resistant products – pg. 48

74

CORR

OSI

ON

RES

ISTA

NT

0.563014.3

23/16

565/16

839/16

9131/8

79.425/8

66.711/2

383/4

19.1SUCNPTRS 205-14

205205-16

7/8

125

7/16

11 NPTRS 205 1.9SUC 205-14

205205-16

1.338634.0

0.500012.7

23/16

565/16

831/2

8931/8

79.425/8

66.711/2

383/4

19.1

SUCNPTRS 201-8202-10204-12204

1/25/83/4

20

7/16

11 NPTRS 204 1.7SUC 201-8

202-10204-12204

1.220531.0

0.689017.5

211/16

685/16

841/2

11441/8

10531/2

88.921/2

647/8

22.2

SUCNPTRS 207-20207-21207-22207207-23

11/4

15/16

13/8

17/16

35

1/2

13 NPTRS 207 3.5

SUC 207-20207-21207-22207207-23

1.689042.9

0.626015.9

211/16

685/16

845/16

11041/8

10531/2

88.921/2

647/8

22.2

SUCNPTRS 206-18206206-19206-20

11/8

13/16

11/4S

30 1/2

13 NPTRS 206 2.9SUC 206-18

206206-19206-20

1.500038.1

UnitNo.

Dimensions (in.)(mm)

C N

0.775619.7

0.720518.3

1.000025.4

0.874022.2

MHFWAEBS

Weight(lbs.)

HousingNo.

BearingNo.

Bi

SUCNPTRS with Stainless Steel Bearing Inserts

7/8

22

3/4

19

125

15/16

24

L

1/4

6.4

1/4

6.4

5/16

7.9

5/16

7.9

k

13/8

35

13/8

35

13/8

35

13/8

35

P

7/8

22

7/8

22

15/16

24

15/16

24

0.563014.3

23/16

565/16

839/16

9131/8

79.425/8

66.711/2

383/4

19.1CUCNPTRS 205-14

205205-16

7/8

125

7/16

11 NPTRS 205 1.9CUC 205-14

205205-16

1.338634.0

0.500012.7

23/16

565/16

831/2

8931/8

79.425/8

66.711/2

383/4

19.1CUCNPTRS 204-12

2043/4

207/16

11 NPTRS 204 1.7CUC 204-12204-8

1.220531.0

0.689017.5

211/16

685/16

841/2

11441/8

10531/2

88.921/2

647/8

22.2

CUCNPTRS 207-20207-22207207-23

11/4

13/8

17/16

351/2

13 NPTRS 207 3.5CUC 207-20

207-22207207-23

1.689042.9

0.626015.9

211/16

685/16

845/16

11041/8

10531/2

88.921/2

647/8

22.2

CUCNPTRS 206-18206206-19206-20

11/8

13/16

11/4S

30 1/2

13 NPTRS 206 2.9CUC 206-18

206206-19206-20

1.500038.1

0.775619.7

0.720518.3

1.000025.4

0.874022.2

CUCNPTRS with Hard Chrome Coated Bearing Inserts

7/8

22

3/4

19

125

15/16

24

1/4

6.4

1/4

6.4

5/16

7.9

5/16

7.9

13/8

35

13/8

35

13/8

35

13/8

35

7/8

22

7/8

22

0.748019.0

31/4

833/8

9.553/8

13743/4

1214

101.6376

11/8

28.6CUCNPTRS 208-24

20811/2

4021/32

17 NPTRS 208 5.5CUC 208-24208

1.937049.2

1.189030.2

13/16

305/16

7.915/8

4115/32

29

0.748019.0

31/4

833/8

9.553/8

13743/4

1214

101.6376

11/8

28.6SUCNPTRS 208-24

20811/2

4021/32

17 NPTRS 208 5.5SUC 208-24208

1.937049.2

1.189030.2

13/16

305/16

7.915/8

4115/32

29

15/16

24

15/16

24

0.563014.3

23/16

565/16

839/16

9131/8

79.425/8

66.711/2

383/4

19.1BUCNPTRS 205-14

205205-16

7/8

125

7/16

11 NPTRS 205 1.9BUC 205-14

205205-16

1.338634.0

0.500012.7

23/16

565/16

831/2

8931/8

79.425/8

66.711/2

383/4

19.1

BUCNPTRS 201-8202-10204-12204

1/25/83/4

20

7/16

11 NPTRS 204 1.7BUC 201-8

202-10204-12204

1.220531.0

0.689017.5

211/16

685/16

841/2

11441/8

10531/2

88.921/2

647/8

22.2

BUCNPTRS 207-20207-22207207-23

11/4

13/8

17/16

351/2

13 NPTRS 207 3.5BUC 207-20

207-22207207-23

1.689042.9

0.626015.9

211/16

685/16

845/16

11041/8

10531/2

88.921/2

647/8

22.2

BUCNPTRS 206-18206206-19206-20

11/8

13/16

11/4S

30 1/2

13 NPTRS 206 2.9BUC 206-18

206206-19206-20

1.500038.1

0.775619.7

0.720518.3

1.000025.4

0.874022.2

BUCNPTRS with Black Oxide Bearing Inserts

7/8

22

3/4

19

125

15/16

24

1/4

6.4

1/4

6.4

5/16

7.9

5/16

7.9

13/8

35

13/8

35

13/8

35

13/8

35

7/8

22

7/8

22

0.748019.0

31/4

833/8

9.553/8

13743/4

1214

101.6376

11/8

28.6BUCNPTRS 208-24

20811/2

4021/32

17 NPTRS 208 5.5BUC 208-24208

1.937049.2

1.189030.2

13/16

305/16

7.915/8

4115/32

29

15/16

24

15/16

24

I

Nickel Plated Take Up Units Narrow Slot with optional bearing inserts:

Stainless Steel-SUCNPTRSHard Chrome Coated-CUCNPTRS

Black Oxide-BUCNPTRS

• B-type Seals• Overview of corrosion

resistant products – pg. 48

B-type Seal

Shaft Dia.

d

(in. ) (mm)

75

CORRO

SION

RESISTAN

T

1.5

NPFB 207 2.9

NPFB 205 1.5

NPFB 207 2.9

NPFB 204 1.5

NPFB 208 4.0

NPFB 206 2.0

NPFB 204 1.5

NPFB 208 4.0

NPFB 206 2.0

43/64

1711/8

28.6113/16

46.03/8

9.525/64

9.911/8

2921/2

6423/4

70SUCNPFB 205-14

205205-16

7/8

125 43/4

1215/16

SUC 205-14205205-16

15/8

41.3

5/8

167/8

22.2111/16

43.35/16

825/64

9.9125

23/8

6021/2

64

SUCNPFB 201-8202-10204-12204

1/25/83/4

20

41/4

1085/16

SUC 201-8202-10204-12204

11/2

38.1

53/54

2111/4

31.823/8

60.31/2

1333/64

13.117/16

3731/4

8333/4

95

SUCNPFB 207-20207-21207-22207207-23

11/4

15/16

13/8

17/16

3561/8

1567/16

SUC 207-20207-21207-22207207-23

250.8

53/64

21139/64

41223/64

605/8

167/16

11.1111/32

3431/16

78315/16

100SUCNPFB 208-24

20811/2

40615/32

1643/8

SUC 208-24208

131/32

50.0

3/4

1911/4

31.821/16

52.43/8

9.525/64

9.911/4

3223/4

7031/4

83

SUCNPFB 206-18206206-19206-20

11/8

13/16

11/4S

30 53/8

1375/16

SUC 206-18206206-19206-20

17/8

47.6

UnitNo.

Dimensions (in.)(mm)

W IJHGSLDB

BoltUsed

(in.)

BearingNo.

E

SUCNPFB with Stainless Steel Bearing Inserts

CUCNPFB with Hard Chrome Coated Bearing Inserts

113/32

35.7

15/16

33.3

13/4

44.4

21/64

51.2

137/64

40.2

Z

1.338634.0

1.220531.0

1.689042.9

1.937049.2

1.500038.1

Bi

0.563014.3

0.500012.7

0.689017.5

0.748019.0

0.626015.9

N

0.775619.7

0.720518.3

1.000025.4

1.189030.2

0.874022.2

43/64

1711/8

28.6113/16

46.03/8

9.525/64

9.911/8

2921/2

6423/4

70BUCNPFB 205-14

205205-16

7/8

125 43/4

1215/16 NPFB 205 1.5

BUC 205-14205205-16

15/8

41.3

5/8

167/8

22.2111/16

43.35/16

825/64

9.9125

23/8

6021/2

64

BUCNPFB 201-8202-10204-12204

1/25/83/4

20

41/4

1085/16 NPFB 204 1.5

BUC 201-8202-10204-12204

11/2

38.1

53/54

2111/4

31.823/8

60.31/2

1333/64

13.117/16

3731/4

8333/4

95

BUCNPFB 207-20207-22207207-23

11/4

13/8

17/16

3561/8

1567/16 NPFB 207 2.9

BUC 207-20207-22207207-23

250.8

53/64

21139/64

41223/64

605/8

167/16

11.1111/32

3431/16

78315/16

100BUCNPFB 208-24

20811/2

40615/32

1643/8 NPFB 208 4.0BUC 208-24

208131/32

50.0

3/4

1911/4

31.821/16

52.43/8

9.525/64

9.911/4

3223/4

7031/4

83

BUCNPFB 206-18206206-19206-20

11/8

13/16

11/4S

30 53/8

1375/16 NPFB 206 2.0

BUC 206-18206206-19206-20

17/8

47.6

BUCNPFB with Black Oxide Bearing Inserts

113/32

35.7

15/16

33.3

13/4

44.4

21/64

51.2

137/64

40.2

1.338634.0

1.220531.0

1.689042.9

1.937049.2

1.500038.1

0.563014.3

0.500012.7

0.689017.5

0.748019.0

0.626015.9

0.775619.7

0.720518.3

1.000025.4

1.189030.2

0.874022.2

43/64

1711/8

28.6113/16

46.03/8

9.525/64

9.911/8

2921/2

6423/4

70CUCNPFB 205-14

205205-16

7/8

125 43/4

1215/16

CUC 205-14205205-16

15/8

41.3

5/8

167/8

22.2111/16

43.35/16

825/64

9.9125

23/8

6021/2

64CUCNPFB 204-12

2043/4

2041/4

1085/16

CUC 204-12204

11/2

38.1

53/54

2111/4

31.823/8

60.31/2

1333/64

13.117/16

3731/4

8333/4

95

CUCNPFB 207-20207-22207207-23

11/4

13/8

17/16

3561/8

1567/16

CUC 207-20207-22207207-23

250.8

53/64

21139/64

41223/64

605/8

167/16

11.1111/32

3431/16

78315/16

100CUCNPFB 208-24

20811/2

40615/32

1643/8

CUC 208-24208

131/32

50.0

3/4

1911/4

31.821/16

52.43/8

9.525/64

9.911/4

3223/4

7031/4

83

CUCNPFB 206-18206206-19206-20

11/8

13/16

11/4S

30 53/8

1375/16

CUC 206-18206206-19206-20

17/8

47.6

113/32

35.7

15/16

33.3

13/4

44.4

21/64

51.2

137/64

40.2

1.338634.0

1.220531.0

1.689042.9

1.937049.2

1.500038.1

0.563014.3

0.500012.7

0.689017.5

0.748019.0

0.626015.9

0.775619.7

0.720518.3

1.000025.4

1.189030.2

0.874022.2

M

Nickel Plated Flange Brackets

Weight(lbs.)

HousingNo.

With optional bearing inserts:Stainless Steel-SUCNPFBHard Chrome Coated-CUCNPFBBlack Oxide-BUCNPFB

B-type Seal

• B-type Seals• Overview of corrosion

resistant products – pg. 48

1.5

1.5

NPFB 207 2.9

NPFB 205

NPFB 205

Shaft Dia.

d

(in. ) (mm)

76

CORR

OSI

ON

RES

ISTA

NT

Nickel Plated Hanger Units

0.775619.7

1.338634.0

PF 3/4

-143/4

19.119/16

40233/64

64041/16

103SUCNPHA 205-14

205205-16

7/8

125 31/16

78 NPHA 205 1.9SUC 205-14

205205-16

0.563014.3

0.720518.3

1.220531.0

PF 3/4

-143/4

19.119/16

40233/64

640325/32

96

SUCNPHA 201-8202-10204-12204

1/25/83/4

20

233/64

64 NPHA 204 1.7SUC 201-8

202-10204-12204

0.500012.7

1.000025.4

1.689042.9

PF 3/4

-143/4

19.119/16

4023/4

70049/16

116

SUCNPHA 207-20207-21207-22207207-23

11/4

15/16

13/8

17/16

3535/8

92 NPHA 207 2.6

SUC 207-20207-21207-22207207-23

0.689017.5

1.189030.2

1.937049.2

PF 3/4

-143/4

19.119/16

4027/8

735/64

2427/32

123SUCNPHA 208-24

20811/2

40315/16

100 NPHA 208 3.4SUC 208-24208

0.748019.0

0.874022.2

1.500038.1

PF 3/4

-143/4

19.119/16

40233/64

64043/32

104

SUCNPHA 206-18206206-19206-20

11/8

13/16

11/4S

30 35/32

80 NPHA 206 1.9SUC 206-18

206206-19206-20

0.626015.9

1.189030.2

1.937049.2

PF 1-111/2

13/16

2117/8

48315/64

8213/64

5511/32

136SUCNPHA 209-27

209-28209

13/4

4541/4

108 NPHA 209 3.9SUC 209-27

209-28209

0.748019.0

1.283532.6

2.031551.6

PF 1-111/2

13/16

2117/8

48317/64

8313/64

5519/32

142SUCNPHA 210-31

210210-32 2S

50 421/32

118 NPHA 210 4.6SUC 210-31

210210-32

0.748019.0

1.563039.7

2.563065.1

PF 11/4

-111/2

13/32

2823/8

6041/64

10223/64

9613/16

173SUCNPHA 212-36

212-3921/4

27/16

519/32

142 NPHA 212 8.2SUC 212-36212-39

1.000025.4

UnitNo.

Shaft Dia.

d

(in. ) (mm)

Dimensions (in.)(mm)

A MBiKDLHCW

Weight(lbs.)

HousingNo.

BearingNo.

N

SUCNPHA with Stainless Steel Bearing Inserts

0.775619.7

1.338634.0

PF 3/4

-143/4

19.119/16

40233/64

64041/16

103CUCNPHA 205-14

205205-16

7/8

125 31/16

78 NPHA 205 1.9CUC 205-14

205205-16

0.563014.3

0.720518.3

1.220531.0

PF 3/4

-143/4

19.119/16

40233/64

640325/32

96CUCNPHA 204-12

2043/4

20233/64

64 NPHA 204 1.7CUC 204-12204

0.500012.7

1.000025.4

1.689042.9

PF 3/4

-143/4

19.119/16

4023/4

70049/16

116

CUCNPHA 207-20207-22207207-23

11/4

13/8

17/16

3535/8

92 NPHA 207 2.6CUC 207-20

207-22207207-23

0.689017.5

1.189030.2

1.937049.2

PF 3/4

-143/4

19.119/16

4027/8

735/64

2427/32

123CUCNPHA 208-24

20811/2

40315/16

100 NPHA 208 3.4CUC 208-24208

0.748019.0

0.874022.2

1.500038.1

PF 3/4

-143/4

19.119/16

40233/64

64043/32

104

CUCNPHA 206-18206206-19206-20

11/8

13/16

11/4S

30 35/32

80 NPHA 206 1.9CUC 206-18

206206-19206-20

0.626015.9

CUCNPHA with Hard Chrome Coated Bearing Inserts

With optional bearing inserts:Stainless Steel-SUCNPHAHard Chrome Coated-CUCNPHA• B-type Seals• Available with locking

collar bearings.Please ask.

• Overview of corrosionresistant products – pg. 48

B-type Seal

111/16

115/16

77

CORRO

SION

RESISTAN

T

With Black Oxide Bearing Inserts-BUCNPHA• B-type Seals• Overview of corrosion

resistant products – pg. 48B-type Seal

Nickel Plated Hanger Units

0.775619.7

1.338634.0

PF 3/4

-143/4

19.119/16

40233/64

64041/16

103BUCNPHA 205-14

205205-16

7/8

125 31/16

78 NPHA 205 1.9BUC 205-14

205205-16

0.563014.3

0.720518.3

1.220531.0

PF 3/4

-143/4

19.119/16

40233/64

640325/32

96

BUCNPHA 201-8202-10204-12204

1/25/83/4

20

233/64

64 NPHA 204 1.7BUC 201-8

202-10204-12204

0.500012.7

1.000025.4

1.689042.9

PF 3/4

-143/4

19.119/16

4023/4

70049/16

116

BUCNPHA 207-20207-22207207-23

11/4

13/8

17/16

3535/8

92 NPHA 207 2.6BUC 207-20

207-22207207-23

0.689017.5

1.189030.2

1.937049.2

PF 3/4

-143/4

19.119/16

4027/8

735/64

2427/32

123BUCNPHA 208-24

20811/2

40315/16

100 NPHA 208 3.4BUC 208-24208

0.748019.0

0.874022.2

1.500038.1

PF 3/4

-143/4

19.119/16

40233/64

64043/32

104

BUCNPHA 206-18206206-19206-20

11/8

13/16

11/4S

30 35/32

80 NPHA 206 1.9BUC 206-18

206206-19206-20

0.626015.9

1.563039.7

2.563065.1

PF 11/4

-111/2

13/32

2823/8

6041/64

10223/64

9613/16

173BUCNPHA 212-36

212212-39

21/4

27/16

60 519/32

142 NPHA 212 8.2BUC 212-36

212212-39

1.000025.4

1.189030.2

1.937049.2

PF 1-111/2

13/16

2117/8

48315/64

8213/64

5511/32

136

BUCNPHA 209-26209-27209-28209

111/16

13/4

45

41/4

108 NPHA 209 3.9BUC 209-26

209-27209-28209

0.748019.0

1.283532.6

2.031551.6

PF 1-111/2

13/16

2117/8

48317/64

8313/64

5519/32

142

BUCNPHA 210-30210-31210210-32

115/16

2S50

421/32

118 NPHA 210 4.6BUC 210-30

210-31210210-32

0.748019.0

1.563039.7

2.563065.1

PF 11/4

-111/2

13/32

2823/8

6041/64

10223/64

9613/16

173UCXNPHA* 211

211-35 23/16

55 519/32

142 NPHA 212 8.5UCX 11211-35

1.000025.4

1.752044.5

3.063077.8

PF 11/2

-111/2

11/4

3223/4

70439/64

1173/8

9.577/8

200UCXNPHA* 214-43 211/16617/32

166 NPHA 215 13.2UCX 14-431.311033.3

1.752044.5

3.063077.8

PF 11/2

-111/2

11/4

3223/4

70439/64

1173/8

9.577/8

200BUCNPHA 215-47

215-48215/16

3617/32

166 NPHA 215 12.2BUC 215-47215-48

1.311033.3

UnitNo.

Shaft Dia.

d

(in. ) (mm)

Dimensions (in.)(mm)

A MBiKDLHCW

Weight(lbs.)

HousingNo.

BearingNo.

N

*Bearing insert is not available in black oxide

15/8

17/8

78

CORR

OSI

ON

RES

ISTA

NT

Nickel Plated Piloted Flanges

1.689042.9

5/16

83.37585.7

7/8

22.53/8

9.53/8

9.515/32

12.041/8

104.8

SUCNPFCS 207-20207-21207-22207207-23

11/4

15/16

13/8

17/16

355

1273/8 NPFC X06 3.3

SUC 207-20207-21207-22207207-23

15/16

33.4

1.500038.1

25/64

103.00076.2

15/16

24.03/8

9.515/64

6.03/8

9.535/8

92

SUCNPFCS 206-18206206-19206-20

11/8

13/16

11/4S

30 43/8

1115/16 NPFC X05 2.6

SUC 206-18206206-19206-20

19/32

32.2

1.937049.2

23/64

93.62592.1

11/32

26.07/16

11.07/16

11.015/32

12.043/8

111SUCNPFCS 208-24

20811/2

4051/4

1333/8 NPFC X07 4.2SUC 208-24

208117/32

39.2

UnitNo.

Shaft Dia.

d

(in. ) (mm)

Dimensions (in.)(mm)

A BiIFGKJSP

BoltUsed

(in.)

Weight(lbs.)

HousingNo.

BearingNo.

Z

SUCNPFCS with Stainless Steel Bearing Inserts

0.689017.5

0.626015.9

0.748019.0

N

1.000025.4

0.874022.2

1.189030.2

1.689042.9

5/16

83.37585.7

7/8

22.53/8

9.53/8

9.515/32

12.041/8

104.8

CUCNPFCS 207-20207-22207207-23

11/4

13/8

17/16

355

1273/8 NPFC X06 3.3

CUC 207-20207-22207207-23

15/16

33.4

1.500038.1

25/64

103.00076.2

15/16

24.03/8

9.515/64

6.03/8

9.535/8

92

CUCNPFCS 206-18206206-19206-20

11/8

13/16

11/4S

30 43/8

1115/16 NPFC X05 2.6

CUC 206-18206206-19206-20

19/32

32.2

1.937049.2

23/64

93.62592.1

11/32

26.07/16

11.07/16

11.015/32

12.043/8

111CUCNPFCS 208-24

20811/2

4051/4

1333/8 NPFC X07 4.2CUC 208-24

208117/32

39.2

0.689017.5

0.626015.9

0.748019.0

1.000025.4

0.874022.2

1.189030.2

1.937049.2

23/64

93.625*

92.111/32

26.07/16

11.07/16

11.015/32

12.043/8*

111SUCNPFCS 209-27

209-28209

111/16

13/4

4551/4

1333/8 NPFC X08 4.4

SUC 209-27209-28209

117/32

39.20.7480

19.01.1890

30.2

2.031551.6

5/16

84.250108.0

125.0

7/16

11.015/32

12.035/64

14.051/8

130SUCNPFCS 210-31

210210-32

115/16

2S50 63/32

1557/16 NPFC X09 5.7

SUC 210-31210210-32

119/32

40.60.7480

19.01.2835

32.6

2.189055.6

9/32

74.500114.3

125.0

7/16

11.05/8

16.035/64

14.053/8

136.5SUCNPFCS 211-32

211-352

23/16

63/8

1627/16 NPFC X10 7.0SUC 211-32

211-35119/32

40.40.8740

22.21.3150

33.42.5630

65.15/32

45.000127.0

11/32

26.01/2

13.055/64

22.05/8

16.06

152.4SUCNPFCS 212-39 27/1673/32

1801/2 NPFC X11 9.5SUC 212-39123/32

43.71.0000

25.41.5630

39.7

M

CUCNPFCS with Hard Chrome Coated Bearing Inserts

* Also available in FCF(209) style housing where P=51/8", F=4.250.See pg. 33 for other details.

With optional bearing inserts:Stainless Steel-SUCNPFCSHard Chrome Coated-CUCNPFCS

• B-type Seals • Overview of corrosionresistant products – pg. 48

B-type Seal

1.937049.2

23/64

93.625*

92.111/32

26.07/16

11.07/16

11.015/32

12.043/8*

111CUCNPFCS 209-27

209-28209

111/16

13/4

4551/4

1333/8 NPFC X08 4.4

CUC 209-27209-28209

117/32

39.20.7480

19.01.1890

30.2

2.031551.6

5/16

84.250108.0

125.0

7/16

11.015/32

12.035/64

14.051/8

130CUCNPFCS 210-31

210210-32

115/16

2S50 63/32

1557/16 NPFC X09 5.7

CUC 210-31210210-32

119/32

40.60.7480

19.01.2835

32.6

79

CORRO

SION

RESISTAN

T

With Black Oxide Bearing Inserts-BUCNPFCS• B-type Seals • Overview of corrosion

resistant products – pg. 48B-type Seal

Nickel Plated Piloted Flanges

1.689042.9

5/16

83.37585.7

7/8

22.53/8

9.53/8

9.515/32

12.041/8

104.8

BUCNPFCS 207-20207-22207207-23

11/4

13/8

17/16

355

1273/8 NPFC X06 3.3

BUC 207-20207-22207207-23

15/16

33.4

1.500038.1

25/64

103.00076.2

15/16

24.03/8

9.515/64

6.03/8

9.535/8

92

BUCNPFCS 206-18206206-19206-20

11/8

13/16

11/4S

30 43/8

111 5/16NPFC X05 2.6

BUC 206-18206206-19206-20

19/32

32.2

1.937049.2

23/64

93.62592.1

11/32

26.07/16

11.07/16

11.015/32

12.043/8

111BUCNPFCS 208-24

20811/2

4051/4

1333/8 NPFC X07 4.2BUC 208-24

208117/32

39.2

UnitNo.

Shaft Dia.

d

(in. ) (mm)

Dimensions (in.)(mm)

A BiIFGKJSP

BoltUsed

(in.)

Weight(lbs.)

HousingNo.

BearingNo.

Z

0.689017.5

0.626015.9

0.748019.0

N

1.000025.4

0.874022.2

1.189030.2

1.937049.2

23/64

93.625*92.1

11/32

26.07/16

11.07/16

11.015/32

12.043/8*111

BUCNPFCS 209-26209-27209-28209

15/8

111/16

13/4

45

51/4

1333/8 NPFC X08 4.4

BUC 209-26209-27209-28209

117/32

39.20.7480

19.01.1890

30.2

2.031551.6

5/16

84.250108.0

125.0

7/16

11.015/32

12.035/64

14.051/8

130

BUCNPFCS 210-30210-31210210-32

17/8

115/16

2S50

63/32

1557/16 NPFC X09 5.7

BUC 210-30210-31210210-32

119/32

40.60.7480

19.01.2835

32.6

2.189055.6

9/32

74.500114.3

125.0

7/16

11.05/8

16.035/64

14.053/8

136.5BUCNPFCS 211-32

211211-35

2

23/16

55 63/8

1627/16 NPFC X10 7.0

BUC 211-32211211-35

119/32

40.40.8740

22.21.3150

33.4

2.563065.1

5/32

45.000127.0

11/32

26.01/2

13.055/64

22.05/8

16.06

152.4BUCNPFCS 212-36

212212-39

21/4

27/16

60 73/32

1801/2 NPFC X11 9.5

BUC 212-36212212-39

123/32

43.71.0000

25.41.5630

39.7

2.563065.1

7/16

115.500139.7

15/16

33.09/16

14.025/32

20.05/8

16.061/2

165BUCNPFCS 213-40 21/275/8

1941/2 NPFC X12 11.7BUC 213-402

50.71.0000

25.41.5630

39.7

M

* Also available in FCF(209) style housing where P=51/8", F=4.250.See pg. 33 for other details.

80

CORR

OSI

ON

RES

ISTA

NT

Balls & Rings 440 Stainless SteelSeal Silicone RubberSeal Frame & Slinger 302 Stainless SteelRetainer 302 Stainless SteelSet Screws 304 Stainless SteelLocking Collar (SNA only) 304 Stainless SteelLubrication H-1 Food Grade Grease

1/4-28UNF0.21655.5

0.775619.7

0.563014.3

0.669317.0

1.338634.0

SUC 205-14205205-16

7/8

125 2.0472

52.0 1,4400.510.440.44

2,670

1/4-28UNF0.19695.0

0.720518.3

0.500012.7

0.629916.0

1.220531.0

SUC 201-8202-10204-12204

1/25/83/4

20

1.850447.0 1,220

0.460.420.350.35

2,440

5/16-24UNF0.31508.0

1.189030.2

0.748019.0

0.866122.0

1.937049.2

SUC 209-27209-28209

111/16

13/4

453.346585.0 3,680

1.631.541.50

6,230

3/8-24UNF0.35439.0

1.283532.6

0.748019.0

0.944924.0

2.031551.6

SUC 210-31210210-32

115/16

2S50 3.5433

90.0 4,0701.811.761.66

6,590

3/8-24UNF0.413410.5

1.563039.7

1.000025.4

1.063027.0

2.563065.1

SUC 212-36212212-39

21/4

27/16

60 4.3307110.0 5,870

3.683.403.20

8,910

3/8-24UNF0.35439.0

1.315033.4

0.874022.2

0.984325.0

2.189055.6

SUC 211-32211211-35

2

23/16

55 3.9370100.0 4,890

2.782.452.40

7,780

1/4-28UNF0.23626.0

0.874022.2

0.626015.9

0.748019.0

1.500038.1

SUC 206-18206206-19206-20

11/8

13/16

11/4S

30 2.440962.0 2,020

0.750.710.710.71

3,710

5/16-24UNF0.25596.5

1.000025.4

0.689017.5

0.787420.0

1.689042.9

SUC 207-20207-21207-22207207-23

11/4

15/16

13/8

17/16

352.834672.0 2,780

1.191.121.061.060.99

4,930

5/16-24UNF0.31508.0

1.189030.2

0.748019.0

0.826821.0

1.937049.2

SUC 208-24208

11/2

403.149680.0 3,300 1.50

1.415,660

Stainless Steel Bearing Inserts

BearingNo.

Bore Dia.of Bearing

d

(in. ) (mm)

Dimensions (in.)(mm)

D GMNBeBi

Weight(lbs.)

BasicStaticLoad

Rating(lbs.)

BasicLoad

Rating(lbs.)

Ds (In.)

SUC Set Screw Lock

SNA with Eccentric Locking Collar

SUC with Set Screw Lock

SNA with Eccentric Locking Collar

0.685017.4

0.563014.3

0.669317.0

1.622041.2

SNA 205-14205205-16

7/8

125 2.0472

52.0 1,4400.580.490.49

2,6700.18904.8

0.842521.4

0.748019.0

0.866122.0

2.122053.9

SNA 209-28 13/4 3.346585.0 3,680 1.836,2300.2677

6.8

0.842521.4

0.748019.0

0.826821.0

2.122053.9

SNA 208-24208

11/240

3.149680.0 3,300

1.751.645,6600.2677

6.8

0.669317.0

0.500012.7

0.629916.0

1.543339.2

SNA 204-12204

3/420

1.850447.0 1,220 0.45

0.432,4400.18904.8

1/4 -28UNF

5/16 -24UNF

5/16 -24UNF

1/4 -28UNF

5/16 -24UNF0.716518.2

0.626015.9

0.748019.0

1.811046.0

SNA 206-18206206-19206-20

11/8

13/16

11/4S

30 2.440962.0

2,0200.890.840.840.76

3,7100.23626.0

5/16 -24UNF0.740218.8

0.689017.5

0.787420.0

1.960649.8

SNA 207-20207-22207207-23

11/4

13/8

17/16

352.834672.0

2,7801.441.281.281.22

4,9300.26776.8

5/16 -24UNF0.968524.6

0.748019.0

0.944924.0

2.248057.1

SNA 210-31210-32

115/16

2S3.543390.0 4,070 2.19

2.076,5900.26776.8

SUC SNA

L3-type Seal

B-type Seal

L3-type seal available in SUC units only. Limited sizes. Consult IPTCI for speed limitations.

B-type sealavailable in allstyles and sizes.

81

CORRO

SION

RESISTAN

T

B-type Seal

Hard Chrome Coated Inserts

CUC

Rings Hard Chrome CoatedBalls 440 Stainless SteelSeal Silicone RubberSlinger & Seal Frame 302 Stainless SteelRetainer 302 Stainless Steel*Set Screws 304 Stainless SteelLubrication H-1 Food Grade Grease* Chrome coated for sizes 213-215

BearingNo.

Bore Dia.of Bearing

d

(in. ) (mm)

Dimensions (in.)(mm)

D GMNBeBi

Weight(lbs.)

BasicStaticLoad

Rating(lbs.)

BasicLoad

Rating(lbs.)

Ds (in.)

0.35439.0

1.283532.6

0.748019.0

0.944924.0

2.031551.6

CUC 210-31210210-32

115/16

2S50 3.5433

90.0 4,9101.811.761.66

7,4003/8-24UNF

0.19695.0

0.720518.3

0.500012.7

0.629916.0

1.220531.0

CUC 204-12204

3/4

201.850447.0 1,600 0.35

0.352,7401/4-28UNF

0.35439.0

1.315033.4

0.874022.2

0.984325.0

2.189055.6

CUC 211-32211-35

223/16

3.9370100.0 6,440 2.78

2.409,4903/8-24UNF

0.31508.0

1.189030.2

0.748019.0

0.826821.0

1.937049.2

CUC 208-24208

11/2

403.149680.0 3,960 1.50

1.416,3755/16-24UNF

0.21655.5

0.775619.7

0.563014.3

0.669317.0

1.338634.0

CUC 205-14205205-16

7/8

125 2.0472

52.0 1,7500.510.440.44

3,0101/4-28UNF

0.413410.5

1.563039.7

1.000025.4

1.063027.0

2.563065.1

CUC 212-36212-39

21/4

27/16

4.3307110.0 7,940 3.68

3.2011,5003/8-24UNF

0.472412.0

1.563039.7

1.000025.4

1.102428.0

2.563065.1CUC 213-40 21/2

4.7244120.0 8,760 4.2812,4001/2-20UNF

0.472412.0

1.752044.5

1.311033.3

1.259832.0

3.063077.8

CUC 215-47215-48

215/16

35.1181130.0 10,540 5.02

4.6714,6201/2-20UNF

0.31508.0

1.189030.2

0.748019.0

0.866122.0

1.937049.2

CUC 209-27209-28209

111/16

13/4

453.346585.0 4,460

1.631.541.50

7,1105/16-24UNF

0.23626.0

0.874022.2

0.626015.9

0.748019.0

1.500038.1

CUC 206-18206206-19206-20

11/8

13/16

11/4S

30 2.440962.0 2,430

0.750.710.710.71

4,2001/4-28UNF

0.25596.5

1.000025.4

0.689017.5

0.787420.0

1.689042.9

CUC 207-20207-22207207-23

11/4

13/8

17/16

352.834672.0 3,340

1.191.061.060.99

5,5355/16-24UNF

CUC with Set Screw Lock

CUC Set Screw Lock

82

CORR

OSI

ON

RES

ISTA

NT

B-type Seal

SSERSet Screw Lock with snap ring

Balls & Rings 440 Stainless SteelSet Screws 304 Stainless SteelSlinger & Seal Frame 302 Stainless SteelRetainer 302 Stainless SteelSeal Silicone RubberLubrication H-1 Food Grade Grease

Stainless Steel Bearing Inserts

BearingNo.

Bore Dia.of Bearing

d

(in. ) (mm)

Dimensions (in.)(mm)

D JHAEMNBeBi

Weight(lbs.)

BasicStaticLoad

Rating(lbs.)

BasicLoad

Rating(lbs.)

R GP Ds (in.)

SSER 201-8202-10204-12204

1/25/83/4

1.850447.0 1,220 0.49

20

0.09382.38

0.17194.4

0.04691.19

0.484412.30

0.812520.6

0.406310.3

0.625015.9

1.218831.0 2,4400.1719

4.370.1875

4.82.062552.4

0.09382.38

0.20315.2

0.04691.19

0.609415.48

0.859421.8

0.515613.1

0.750019.1

1.375034.9

SSER 205-14205205-16

7/8

125 2.0472

52.0 1,440 0.602,6700.23445.95

0.21885.6

2.265657.5

1/4-28UNF

1/4-28UNF

1/4-28UNF0.12523.18

0.21655.5

0.65501.65

0.676017.17

0.874022.2

0.626015.9

0.866122.0

1.500038.1

SSER 206-18206206-19206-20

11/8

13/16

11/4S

30 2.440962.0 2,020 0.863,7100.2421

6.150.2362

6.02.657567.5

5/16-24UNF0.12523.18

0.21655.5

0.06501.65

0.754719.17

1.000025.4

0.689017.5

0.944924.0

1.689042.9

SSER 207-20207-22207207-23

11/4

13/8

17/16

352.834672.0 2,780 1.394,9300.2815

7.150.2559

6.53.090678.4

0.12523.18

0.23626.0

0.06501.65

0.912223.17

1.189030.2

0.748019.0

1.102428.0

1.937049.2

SSER 208-24208

11/2

403.149680.0 3,300 1.795,6605/16-24UNF0.3602

9.150.3150

8.03.401686.4

• B-type Seals • Overview of corrosionresistant products – pg. 48

0.15754.0

0.629916.0

0.23626.0

0.866122.0

1.574840.0

SSB 201-8202-10

1/25/8

0.472412.0

830 0.221,77010-32UNF

0.19695.0

0.708718.0

0.27567.0

0.984325.0

1.850447.0

SSB 204-12204

3/4

200.551214.0 1,220 0.332,4401/4 -28UNF

0.21655.5

0.767719.5

0.29537.5

1.063027.0

2.047252.0

SSB 205-14205205-16

7/8

125 0.5906

15.0 1,440 0.402,6701/4 -28UNF

0.23626.0

0.826721.0

0.31508.0

1.141729.0

2.440962.0

SSB 206-18206206-19206-20

11/8

13/16

11/4S

30 0.629916.0 2,020 0.603,7101/4 -28UNF

0.23626.0

0.925223.5

0.33468.5

1.259832.0

2.834672.0

SSB 207-20207-22207207-23

11/4

13/8

17/16

350.669317.0 2,780 0.934,9305/16 -24UNF

BearingNo.

Bore Dia.of Bearing

d

(in. ) (mm)

Dimensions (in.)(mm)

Be GMNBiD

Weight(lbs.)

BasicStaticLoad

Rating(lbs.)

BasicLoad

Rating(lbs.)

Ds

SSBSet Screw Lock, Narrow Inner RaceRelubricatableBalls & Rings 440 Stainless SteelSeal Silicone RubberSlinger & Seal Frame 302 Stainless SteelRetainer 302 Stainless SteelSet Screws 304 Stainless SteelLubrication H-1 Food Grade Grease

K-type Seal(back)

B-type Seal(front)

83

CORRO

SION

RESISTAN

T

B-type Seal

BUC Black Oxide Bearing Inserts

BearingNo.

Bore Dia.of Bearing

d

(in. ) (mm)

Dimensions (in.)(mm)

D GMNBeBi

Weight(lbs.)

BasicStaticLoad

Rating(lbs.)

BasicLoad

Rating(lbs.)

Ds (in.)

0.35439.0

1.283532.6

0.748019.0

0.944924.0

2.031551.6

BUC 210-30210-31210210-32

17/8

115/16

2S50

3.543390.0 4,910

1.921.811.761.66

7,4003/8-24UNF

0.19695.0

0.720518.3

0.500012.7

0.629916.0

1.220531.0

BUC 201-8202-10204-12204

BUCW 201-8202-10

1/25/83/4

20

1.850447.0 1,600

0.460.420.350.35

2,7401/4-28UNF

0.35439.0

1.315033.4

0.874022.2

0.984325.0

2.189055.6

BUC 211-32211211-35

2

23/16

55 3.9370100.0 6,440

2.782.452.40

9,4903/8-24UNF

0.31508.0

1.189030.2

0.748019.0

0.826821.0

1.937049.2

BUC 208-24208

11/2

403.149680.0 3,960 1.50

1.416,3755/16-24UNF

0.15754.0

0.629916.0

0.393710.0

0.590615.0

1.023626.0

1/25/8

1.574840.0 1,020 0.26

0.242,04010-32UNF

0.21655.5

0.775619.7

0.563014.3

0.669317.0

1.338634.0

BUC 205-14205205-16

7/8

125 2.0472

52.0 1,7500.510.440.44

3,0101/4-28UNF

0.413410.5

1.563039.7

1.000025.4

1.063027.0

2.563065.1

BUC 212-36212212-39

21/4

27/16

60 4.3307110.0 7,940

3.683.403.20

11,5003/8-24UNF

0.472412.0

1.563039.7

1.000025.4

1.102428.0

2.563065.1BUC 213-40 21/2

4.7244120.0 8,760 4.2812,4001/2-20UNF

0.472412.0

1.752044.5

1.311033.3

1.259832.0

3.063077.8

BUC 215-47215-48

215/16

35.1181130.0 10,540 5.02

4.6714,6201/2-20UNF

0.31508.0

1.189030.2

0.748019.0

0.866122.0

1.937049.2

BUC 209-26209-27209-28209

15/8

111/16

13/4

45

3.346585.0 4,460

1.721.631.541.50

7,1105/16-24UNF

0.23626.0

0.874022.2

0.626015.9

0.748019.0

1.500038.1

BUC 206-18206206-19206-20

11/8

13/16

11/4S

30 2.440962.0 2,430

0.750.710.710.71

4,2001/4-28UNF

0.25596.5

1.000025.4

0.689017.5

0.787420.0

1.689042.9

BUC 207-20207-22207207-23

11/4

13/8

17/16

352.834672.0 3,340

1.191.061.060.99

5,5355/16-24UNF

• Standard duty with set screw lock

• Wide inner race

• B-type Seals

84

TECH

NIC

AL

INFO

RMAT

ION

Housings

Nominal spherical inside diameterSymbol H Symbol J Symbol KD1

D1 m D1 D1 m D1 D1 m D1Over Incl. Deviations Deviations Deviations Deviations Deviations Deviations

Tolerances of spherical inside diameter of housings

D1m is determined by the following equation:

D1m=

Where D1max and D1min are maximum and minimum measurements ofD1, respectively.

For practical purposes, bearing/housing fit is often expressed in terms offoot pounds of misalignment torque. IPTCI mounted units are typicallymachined to provide for a light interference fit. However, for specialapplications, IPTCI can provide clearance fit (H) or substantialinterference fit (K).

D1max + D1min2

Materials of Housings

Gray IronCast in high strength gray iron, IPTCI’s standard cast housings are among the most rigidly designed and heaviest available in the industry. This enablesIPTCI’s housings to withstand high vibration and shock loading.

Ductile IronWhen extra strength is needed for extremely rugged applications, IPTCI’s ductile iron is an excellent alternative. Ductile iron is approximately 2.5 timesstronger (tensile) than gray iron and also offers the benefit of reduced flex memory. Some IPTCI standard housing styles are available from stock inductile iron. All can be made upon request.

Stainless Steel & ThermoplasticSee page 48 for complete details.

Unit =.001 mm

(.0001 in.)

+25 +30 -5 +14 -11 +19 -16 +7 -18 +12 -23

(+10) (+12) (-2) (+6) (-4) (+7) (-6) (+3) (-7) (+5) (-9)

+30 +38 -6 +18 -12 +24 -18 +9 -21 +15 -27

(+12) (+14) (-2) (+7) (-5) (+9) (-7) (+4) (-8) (+6) (-11)

+35 +42 -7 +22 -13 +29 -20 +10 -25 +17 -32

(+14) (+17) (-3) (+9) (-5) (+11) (-8) (+4) (-10) (+7) (-13)

+40 +48 -8 +26 -14 +34 -22 +12 -28 +20 -36

(+16) (+19) (-3) (+10) (-6) (+13) (-9) (+5) (-11) (+8) (-14)

+46 +55 -9 +80 -16 +39 -25 +13 -33 +22 -42

(+18) (+22) (-4) (+12) (-6) (+15) (-10) (+5) (-13) (+9) (-17)

+52 +62 -10 +36 -16 +46 -26 +16 -36 +26 -46

(+20) (+24) (-4) (+14) (-6) (+18) (-10) (+6) (-14) (+10) (-18)

mm in. mm in. High Low High Low High Low High Low High Low High Low

30 1.1811 50 1.9685 0

50 1.9685 80 3.1496 0

80 3.1496 120 4.7244 0

120 4.7244 180 7.0866 0

180 7.0866 250 9.8425 0

250 9.8425 315 12.4016 0

85

TECHN

ICAL IN

FORM

ATION

Bearing Selection

Load Capacities & Life CalculationsSimple life/load estimations can be derived from the Radial Load chart shown on page 86. However, if a more specificestimation is desired, the life of a bearing can be calculated by the following formula:

L10h = (C)3

x 16,667P n

Where:L10h = Life hoursC = Basic Load Rating (lbf)P = Equivalent Radial Load (lbf)n = Speed (RPM)

See Page 86, or individual bearing pages for Basic Load Ratings.

L10h equals the number of hours that 90% of an identical sample group, operating under identical and ideal conditions, willoperate without failure. Since actual field conditions seldom, if ever, match the ideal conditions used in the calculation of L10h,compensation for slip fit (most mounted bearings), dust, vibration, and shock loading must be considered. Since most IPTCIproducts are mounted units, it is helpful then to adjust the L10h number by .46 for slip fit applications and further reduce thisnumber by 50-70% to compensate for other operating conditions.

Example:Bearing: UCP205-16 – with slip fit on to ground shafting.Application: Farm equipment experiencing variable shock loading.L10h = 10,000 hoursAdjustment would be: 10,000 x .46 x .3 = 1,380 hours

Light and or infrequent vibration/shock loading may not require as much adjustment; however, IPTCI always recommends verygenerous safety factors for maximum bearing longevity. Additional adjustment may also be required if the bearing is directlyexposed to heavy contaminants. The seal type will then influence the amount of this additional adjustment. It is assumed thatthe bearing will be operated within the confines of its published temperature limits, and that it will be relubricated properly.

Note: Caution is advised if in the use of the L10 formula, extremely high or low hours are derived.

ThrustThe above calculations assume that there is no consequential thrust load present; therefore, the actual radial load equals theEquivalent Radial Load. It is important to note, however, that thrust, or axial force can dramatically affect the life of a mountedball bearing. It is also significant to note that, outside of ideal testing conditions, and without field experience, many thrustapplications are difficult to realistically quantify. Therefore, as thrust exceeds approximately 25% of the Basic Load Rating, or there exists a combination of thrust and speed, please contact IPTCI for technical assistance.

86

TECH

NIC

AL

INFO

RMAT

ION

Bearing Inserts* • Radial Load Chart

UC 201201-8

UC 202202-10

UC 203UC 204-12

204

NA 201201-8

NA 202202-10

NA 203NA 204-12

204

ER 201201-8

ER 202202-10

ER 203ER 204-12

204

SA 204-12204

SB 204-12204

– 2740 2390 1890 1510 1320 1110 910 835 770 725 655 575

UC 206-17206-18206206-19206-20

NA 206-17206-18206206-19206-20

ER 206-17206-18206206-19206-20

SA 206-17206-18206206-19206-20

SB 206-17206-18206206-19206-20

UC X05-14X05-15X05X05-16

4200 3670 2910 2290 2010 1695 1390 1265 1170 1100 990 860

UC 208-24208-25208

NA 208-24208-25208

ER 208-24208-25208

SA 208-24208-25208

SB 208-24208-25208

UC X07-22X07X07-23

6375 5560 4410 3490 3040 2550 2100 1895 1755 1655 1505 –

UC 209-26209-27209-28209

NA 209-26209-27209-28209

ER 209-26209-27209-28209

SA 209-26209-27209-28209

–UC X08-24

X08 7110 6210 4915 3910 3400 2880 2355 2150 1990 1875 1700 –

UC 213-40213

NA 213-40213 – – –

UC X12X12-38X12-39

12,400 10,810 8690 6860 6030 5030 4180 3780 3470 3260 – –

UC 214-44214

NA 214-44214 – – – UC X13-40

X13 13,530 11,820 9450 7480 6480 5520 4540 4110 3820 3510 – –

UC 215-47215215-48

NA 215-47215215-48

ER 215-47215215-48

– – UC X14-44X14 14,620 12,745 10,210 8100 7090 5980 4900 4400 4110 3860 – –

UC 207-20207-21207-22207207-23

NA 207-20207-21207-22207207-23

ER 207-20207-21207-22207207-23

SA 207-20207-21207-22207207-23

SB 207-20207-21207-22207207-23

UC X06-18X06X06-19X06-20

5535 4820 3850 3050 2680 2250 1850 1680 1560 1420 1325 1155

UC 210-30210-31210210-32

NA 210-30210-31210210-32

ER 210-30210-31210210-32

SA 210-30210-31210210-32

–UC X09-26

X09-27X09-28X09

7400 6465 5140 4075 3560 3000 2460 2240 2075 1970 1740 –

UC 211-32211-34211211-35

NA 211-32211-34211211-35

ER 211-32211-34211211-35

SA 211-32211-34211211-35

–UC X10-30

X10-31X10X10-32

9490 8290 6575 5220 4560 3825 3140 2840 2635 2460 2240 –

UC 212-36212212-38212-39

NA 212-36212212-38212-39

ER 212-36212212-38212-39

– –UC X11-34

X11X11-35X11-36

11,500 10,050 7965 6335 5525 4655 3775 3450 3200 3000 – –

UC 216 – – – –UC X15-47

X15X15-48

15,970 13,950 11,070 8160 6470 5650 5150 4840 4490 4200 – –

UC 218-56218 – – – –

UC X17X17-55X17-56

21,120 18,460 14,650 10,780 8560 7480 6800 6400 5940 – – –

– – – – –UC X20

X20-63X20-64

29,300 25,600 20,300 16100 14,100 11,900 9770 8870 – – – –

Bearing Numbers Basic

Load

Rating

@ 331/3

RPM

Radial Load Rating in Pounds at Various RPM

Based on 500 Hours Minimum LifeNormal Duty Light DutyMedium

Duty

UCX 50 100 200 300 500 900 1200 1500 1800 2400 3600UC/UCW SAERNA/NAW SB

UCW 201201-8

UCW 202202-10

UCW 203

NAW 201201-8

NAW 202202-10

NAW 203

–

SA 201201-8

SA 202202-10

SA 203

SB 201201-8

SB 202202-10

SB 203

– 2040 1780 1415 1120 980 830 680 620 575 540 490 425

UC 205-14205-15205205-16

NA 205-14205-15205205-16

ER 205-14205-15205205-16

SA 205-14205-15205205-16

SB 205-14205-15205205-16

– 3010 2625 2085 1650 1450 1210 1000 915 845 800 725 630

*52100 Bearing Steel Only

87

TECHN

ICAL IN

FORM

ATION

Materials of Bearings

Standard Bearing Inserts

Inner and outer rings, as well as balls, are made from vacuum degassed 52100 bearingsteel. Composed of high carbon, chrome alloy, 52100 steel offers great longevity as it isvery resistant to deformation and fatigue.

Stainless Steel & Hard Chrome Coated Bearing InsertsSee page 48 for component detail.

Internal ClearancesThe Normal or Cø fit is generally accepted as an industry standard, and is, therefore, adopted as our standard clearance. However,other fits are available to accommodate extreme temperatures or low tolerance applications where slow r.p.m.s allow for a tighter fit.

Bearing Inserts • Materials and Tolerances

Nominal Outside Diameter

250 9.8425 12.4016

Outside

DiameterRadial

Run-out

(max.)

0 24315

D

mm in. in.

Over

Highmm

Tolerance of DiameterIncluding

80 3.1496 4.7244 0 14120

30 1.1811 1.9685 0 850

50 1.9685 3.1496 0 1080

120 4.7244 5.9055 0 16150

150 5.9055 7.0866 0 18180

Low

– 6

– 7

– 4

– 10

– 5

– 14

– 12180 7.0866 9.8425 0 20250

Inner Ring Unit=.0001 in.

Nominal Bore Diameter

120 4.7244 7.0866 – 30 – 98180

d

mm in. in.

Over

min.min. min.mm

30 1.1811 1.9685 – 20 – 4750

10 0.3937 0.7087 – 20 – 4718

18 0.7087 1.1811 – 20 – 4730

50 1.9685 3.1496 – 20 – 5980

80 3.1496 4.7244 – 30 – 79120

Inner Ring

Width

0

Radial

Run-outs

(Max.)

max.

Bi

+19 14

max.

0

0

+12 8

+14 10

0

0

+ 9 6

+17 12

0+10 7

Bore

Diameter

+16

max.

dm

+10

+12

+ 7

+14

+ 8

Including d

Bore DiameterC2 C3

65 2.5591 0 11

Normal

5 1980

Over Including

10 0.3937 0

mm in. min.

52 818

min. min.mm

30 1.1811 0 73 1240

18 0.7087 0 63 924

24 0.9449 0 63 1030

40 1.5748 0 83 1350

50 1.9685 0 104 1665

5 19

3

max.

9

max.

11 27

6 12

max. max.

4

4

12

13

7 17

8 19

3.5

5

10

16

7 13

10 23

4 107 15

0.7087

3.1496

in.

1.5748

1.9685

0.9449

2.5591

1.1811

min.

C4

80 3.1496 100 3.9370 0 6 6 13 13 22 22 32

100 3.9370 120 4.7244 0 7 7 15 15 25 25 37

Tolerances of RingsOuter Ring Unit=.0001 in.

Unit=.0001 in.

88

Installation & LubricationTE

CHN

ICA

L IN

FORM

ATIO

N For maximum life, IPTCI recommends a fit as close to nominal as possible. Turned and ground shafting is also beneficial as it tendsto be rounder, straighter and free of burrs or other flaws.

Mounting InstructionsWhen mounting, always clean shafting and bearing bore. Then, having coated the shaft with a light oil, slide the bearing unit on theshaft to its correct position. It may be necessary to use a soft mallet and/or pipe, on the inner ring only, to reach the correct position.Never pound on, or apply pressure to, the outside ring! Once the bearing unit is in position, precise alignment can be achieved byfirst fixing the housing in place, then simultaneously rotating and tapping the shaft with a soft mallet. This should be accomplishedbefore any locking collar or set screw is tightened.

When mounting a locking collar bearing, use a spanner wrench or punch to lock the collar in place — always in the direction ofshaft rotation. Then tighten set screw. Do not use locking collar bearings for bi-directional applications.

When mounting set screw locking bearings we recommend the following torque settings:

Shaft Diameter Shaft Tolerance

1/2" - 1 15/16" Nominal to - .0005"

2" - 3 3/16" Nominal to - .0010"

3 1/4" - Up Nominal to - .0015"

10-32 281/4 - 28 665/16 - 24 1263/8 - 24 2287/16 - 20 3061/2 - 20 330

Shaft Tolerances

Mild steel set screws - for standard bearing inserts

1/4 -28 545/16 - 24 1103/8 - 24 205

300 series stainless set screws - for SUC & CUC bearing Inserts

Set Screw Size

LubricationAll IPTCI bearing units are factory prelubricated and, therefore, do not require supplemental grease before service life begins.Relubrication, when administered correctly, can increase the life of a bearing substantially. IPTCI recommends the followinggeneral guidelines to maximize your bearing life:

NOTE:Overlubrication is a major cause of bearingfailures. Please relubricate conservativelywhen unsure of bearing requirements.

When selecting a bearing lubricant, IPTCIsuggests any lithium-based NLGI #2 grease.For operating temperatures higher than 210° F,please consult IPTCI.

Max. Recommended Torque

(in./lbs.)Set Screw Size

Max. Recommended Torque

(in./lbs.)

IntervalEnvironmental

ConditionRPM Temperature

100500

1,0001,500AnyAnyAnyAny

32° F -120° F32° F -150° F32° F - 210° FOver 210° F32°F -150° FOver 150° FAny Temp. Any Temp.

Clean CleanCleanCleanDirtyDirty

Very DirtyExtremely Dirty

6-12 months2-6 months

2 weeks to 2 monthsDaily to weekly

Weekly to monthlyDaily to 2 weeksDaily to weeklyDaily to weekly

89

TECHN

ICAL IN

FORM

ATION

Decimal and Metric Equivalents

Common Fractions of an Inch

0.01562 0.397 0.51562 13.097

0.04688 1.191 0.54688 13.891

1/64

3/64

33/64

35/64

MMDECIMALFRACTIONMMDECIMALFRACTION

1/32 0.03125 0.794 17/32 0.53125 13.494

1/16 0.06250 1.588 9/16 0.56250 14.288

0.07812 1.984 0.57812 14.684

3/32 0.09375 2.381 19/32 0.59375 15.081

0.10938 2.778 0.60938 15.478

1/8 0.12500 3.175 5/8 0.62500 15.875

0.14062 3.572 0.64062 16.272

5/32 0.15625 3.969 21/32 0.65625 16.669

0.17188 4.366 0.67188 17.066

3/16 0.18750 4.763 11/16 0.68750 17.463

0.20312 5.159 0.70312 17.859

7/32 0.21875 5.556 23/32 0.71875 18.256

0.23438 5.953 0.73438 18.653

1/4 0.25000 6.350 3/4 0.75000 19.050

0.26562 6.747 0.76562 19.447

9/32 0.28125 7.144 25/32 0.78125 19.844

0.29688 7.541 0.79688 20.241

5/16 0.31250 7.938 13/16 0.81250 20.638

0.32812 8.334 0.82812 21.034

11/32 0.34375 8.731 27/32 0.84375 21.431

0.35938 9.128 0.85938 21.828

3/8 0.37500 9.525 7/8 0.87500 22.225

0.39062 9.922 0.89062 22.622

13/32 0.40625 10.319 29/32 0.90625 23.019

0.42188 10.716 0.92188 23.416

7/16 0.43750 11.113 15/16 0.93750 23.813

0.45312 11.509 0.95312 24.209

15/32 0.46875 11.906 31/32 0.96875 24.606

0.48438 12.303 0.98438 25.003

5/64

7/64

9/64

11/64

13/64

15/64

17/64

19/64

21/64

23/64

25/64

27/64

29/64

31/64

1/2 0.50000 12.700 1/1 1.00000 25.400

37/64

39/64

41/64

43/64

45/64

47/64

49/64

51/64

53/64

55/64

57/64

59/64

61/64

63/64

90

TECH

NIC

AL

INFO

RMAT

ION

Terms & Conditions of SaleLimitation of LiabilitySeller warrants that the merchandise sold hereunder shall be free from defects in material and workmanship for a period of one(1) year from the delivery date of the merchandise to an end user or eighteen (18) months from the date from seller‘s shipment tobuyer, whichever shall occur first. Sellers sole and exclusive obligation and liability during the warranty period shall be at itsoption to replace or repair any nonconforming or defective merchandise, or refund buyers purchase price thereof. The foregoingwarranty shall be the sole and exclusive liability of seller, and is in lieu of all other warranties expressed, implied,or statutory, including but not limited to, any implied warranty of merchantability or fitness of purpose or use. Sellerneither assumes or authorizes buyer to assume for it any other obligation or liability in connection with the merchandise withoutsellers express prior written consent. In no event shall seller be liable for punitive, special, consequential or incidental damages,or for the loss of profits of buyer, its customers, or other end users of the merchandise. This warranty shall not extend tomerchandise which has been modified, altered, or otherwise subjected to abuse, misuse, neglect, or improper maintenance.

Seller shall be excused from non-performance or delay in the case of force majeure, including strikes, lock-outs and other labordisputes, wars, blockades, revolutions, civil strifes, riots, disturbances, acts of the enemy, accidents, typhoons, hurricanes, fires,floods, earthquakes, diseases, other perils, lack of raw materials, governmental prohibition on exportation, or refusal to issueexport licenses where required, and other causes beyond the control of seller.

This limitation of liability constitutes the complete and exclusive statement of the agreement between the seller and buyer, and onbehalf of end user, related to the subject matter hereof. Any provisions, terms or conditions of buyer‘s purchase order or similarforms which are, in any way inconsistent with or in addition to the terms of this limitation of liability shall not be binding uponseller and shall have no application to the parties hereto or the parts sold and services performed hereunder.

Prices and AcceptanceAll quoted prices are subject to change without notice. Orders not accepted in writing by IPTCI shall not be considered binding.

TermsPayment terms are net cash within 30 days of invoice.

Minimum ChargeThe minimum charge on any order is $25.

ShipmentsUnless otherwise stated, all shipments are F.O.B. factory. All shortage, damage, or non-delivery claims shall be made by theconsignee to the carrier. All claims must be submitted within 60 days from the date of shipment, with copy to consignor.

Our shipping staff attempts to route all freight using the most efficient and competitively priced carriers. Any additional costsincurred by the use of premium rates, or expediting services will be added to our invoice.

Freight AllowanceIPTCI will pay the freight charges on all $2,000+ shipments* when ordered at standard distributor discounts. This can include anyassortment of products listed in the catalog. Note: Any freight prepaid orders will ship via the carrier of IPTCI’s choice.*Continental 48 states only

ReturnsNo goods will be accepted for return without prior written authorization from IPTCI in the form of an issued Returned GoodsAuthorization (RGA). With the exception of defective goods or misshipments, all returns will be subject to a 25% restocking fee,plus return freight.