Ips Catalog

WARNING

Copyright 2002, Parker Hannifin Corporation, All Rights Reserved

Offer of Sale

FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSEDEATH, PERSONAL INJURY AND PROPERTY DAMAGE.This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provide product and/or system options forfurther investigation by users having technical expertise. It is important that you analyze all aspects of your application and review the information concerningthe product or system in the current product catalog. Due to the variety of operating conditions and applications for these products or systems, the user, throughits own analysis and testing, is solely responsible for making the final selection of the products and systems and assuring that all performance, safety and warningrequirements of the application are met.The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by ParkerHannifin Corporation and its subsidiaries at any time without notice.

The items described in this document are hereby offered for sale by Parker Hannifin Corporation, its subsidiaries or its authorized distributors. This offer andits acceptance are governed by the provisions stated in the "Offer of Sale".

Welcome to IPS Industrial ProfileSystems, now a member of theParker Hannifin Corporation.

The innovative modular T-slotaluminum profile system hasconquered the world of machinebuilding. It offers so muchflexibility and cost savings inengineering, fabrication, andassembly; that it is now thepreferred way to design and buildevery imaginable framestructure or enclosure forunlimited applications.

IPS has been a leader in thisindustry in North America for thelast 15 years.The integration ofIPSs extensive product line andstrong service center networkinto Parkers Automation Groupcreates synergies and newbusiness opportunities forgrowth that are clearly structuredto benefit our customers. Beinga member of the worldwideParker Hannifin organizationmakes us an even strongerpartner for you in the future.

The commitment of thecombined IPS and Parker Teamis to service your needs.

Introduction ............................................................................................... 1Innovative Solutions .................................................................... 2Custom and Special Application Needs ..................................... 5Largest Selection of Profiles and Components ....................... 10

1 Profiles ................................................................................................ 14Technical Data .......................................................................... 1440 Series Profiles ..................................................................... 1745 Series Profiles ..................................................................... 2830 Series Profiles ..................................................................... 3028 Series Profiles ..................................................................... 3120 Series Profiles ..................................................................... 34Guarding and Enclosure Profiles ............................................. 35Miscellaneous Profiles ............................................................. 41Profile End Caps ....................................................................... 46Conduit Elements ..................................................................... 47

2 Hardware ............................................................................................ 56Fastening Components ............................................................ 57Leveling Feet, Base Plates and Casters .................................. 77Hinges, Handles, Locks & Latches .......................................... 88Panels, Panel Mounting & Other Accessories ....................... 108Pneumatic Components ........................................................ 125Workstations, and Workstation Accessories .......................... 131

3 45 Series Profiles ............................................................................ 140

4 Linear Applications .......................................................................... 148IPS Roller Systems ................................................................. 149Linear Guide Components ..................................................... 155Linear Drive Components ...................................................... 165Linear Modules ....................................................................... 173Profile Slide Blocks ................................................................. 174Slide Bushing Linear Systems ............................................... 176Linear Rail and Conveyor Profile ............................................ 179UHMW Slide Blocks and Systems ......................................... 184

5 Services and Tools ........................................................................... 196Software .................................................................................. 196Tools and Tool Carts ............................................................... 199Processing Services ............................................................... 201

6 Technical Guide and Index ............................................................... 207By Part # .................................................................................. 208By Description ......................................................................... 212Parker to IPS Cross ................................................................ 220Offer of Sale ............................................................................. 224

2

3

4

5

6

1

Table of Contents

I

Parker Hannifin CorporationIndustrial Profile Systems Business Unit

Houston, Tx 77066

Catalog 1816IPSINDUSTRIAL PROFILE SYSTEMS800-333-4932

Since 1987 IPS, now a member of

Parker Hannifin Corporation

has served many

industries

throughout North

America with its

innovative high

strength aluminum

framing systems

for machine

building and

industrial

applications.

The versatility of

this modular

erector set system makes it ideally suitable for

machine bases and frames, linear slide

systems, safety guarding and enclosures,

worktables, structural framing and material

handling.

Modular aluminum structures offer high

flexibility and functionality combined with visual

appeal and cleanliness of the anodized surface.

These important features present a multitude of

benefits for machine building and automation

projects in industries such as pharmaceutical,

medical,

semiconductor,

electronics,

automotive

component

A Commitment to Customer Service...

Customer service and

customer satisfaction

is our objective.

IPS service centers are

located across North

America support our

customers with local

inventory, engineering,

fabrication, assembly

and installation.

A team of

knowledgeable

professionals and

experienced application

engineers have the expertise necessary to

provide and implement whatever IPS

solution you require.

/design

assistance, as well

as assembly and

installation services.

Our IPS service centers

are stocked with a broad

selection of T-slotted profiles and

accessories. Thus we are able to react

quickly to meet customer's needs in

today's fast paced global economy.

We work closely with customers on

applications that may require custom parts

and specials,

engineering

As a solution provider, IPS offers products and services such as:

Standard length profiles

Custom cut profiles

Modular structures

Bases and frames

Workstations

Safety guards and enclosures

Slides and linear devices

Material handling systems

Services

Regional Service Centers across the US, Canada, and Mexico

Engineering support

Applications assistance

Onsite installation and assembly

CAD and design services

Rapid product delivery

II

Innovative Solutions for Your Structural Framing Needs

WELDED V.S. MODULAR

Compared to welded steel frames, IPS

modular aluminum framing systems

offer unique benefits. The strength is

comparable to steel, yet the flexibility

and versatility is far superior. The pre-

engineered IPS system enables you to

reduce the lead-time for engineering

and fabrication. Modifications and

changes are easily made through all

stages of the evolution of your

projects.

Important Benefits When Using Aluminum Modular Framing Systems from IPS:

Extremely short turnaround from design

to completion.

No welding

No cleaning

No grinding

No distortions

No painting

Lower total cost through elimination of

costly traditional manufacturing

processes.

Serving Limitless Industries in an Unlimited Range of Applications

IPS modular

framing profiles

are successfully applied in an astounding

variety of environments; from automotive to

aerospace, from electronics to packaging,

from pharmaceutical/medical to textiles.

The following are just some of the industries

where IPS modular framing solutions have

proven their worth:

Aerospace

Automotive

Educational

Electronics

Industrial Manufacturing

Medical

Packaging

Pharmaceutical

Plastics

Semiconductor

Textiles

Tires

III

Modular Solutions to Fit Your Needs

Profiles

Fasteners

Linear Motion

Accessories

The extensive product range comprises many different profile shapes. This provides the user with flexibility to apply the components most suitable for his application. The IPS product line includes cross sections from small miniature profiles up to sturdy heavy-duty structural beams that support static and dynamic loads in motion applications, and conduit profiles for pneumatic and electrical needs.

Available in metric sizes from 20mm to 160mm with 5mm, 8mm, 10mm T-slots.

Fabricated from high strength structural aluminum (6005 T5 and 6061 T6).

Offered with clear or black anodized finish.

IPS applies the unique T-slot concavity design for vibration safe permanent pretension of the fastener connection. A variety of standard and universal connectors offer unique design features and flexibility. The vibration safe fastening system from IPS is functional because our profiles are made of high strength alloys. It is this particular feature that has made IPS a leader in our industry and eliminates, in most cases, the need for additional gusset plates.

Metric fastening hardware sizes - M5, M6, M8, M10.

English hardware sizes - 1/4-20, 5/16-18, #10-32.

With its linear motion solutions, IPS has gone beyond the basic framing and guarding requirements. We offer roller bearing modules and DELRIN slide blocks for motion and positioning applications.

No aluminum framing systems is complete without its complimentary range of accessories. That's where IPS differs. IPS offers an extensive range of complimentary accessories such as fasteners, hinges, locks, handles, latches, feet, and casters, that make a true pre-engineered system, a single source solution for all your needs.

IPS can furnish you with accessories such as:

Hinges (plastic and metal)

Safety Limit Switches

Leveling Feet and Casters

Plates, Joints and Connectors

Handles, Locks, Latches Cable and Hose Holders

Panels - Trespa, Wire Mesh, Sintra, Polycarbonate (Lexan)

Sliding Door Components

Parts Bins

Assembly Tools

IV

Complete Line of Profiles and Accessories

Conduit Elements

Fasteners & Connectors

Machine Guarding Components

Pneumatic Components

Feet, Base Plates & Casters

For non-standard or unique applications; that's where

a solution provider like IPS becomes invaluable. At IPS

we have the ability to work with you in designing,

fabricating and assembling a framing solution that

integrates with the latest machine technologies.

Whether you're looking to incorporate a material

handling system, linear device, conveyor or a clean

room environment, IPS has the resources to provide

you a unique customized solution to match your

application requirement.

V

For Custom/Special Application Needs.Automation, Assembly, Enclosures, and Linear Motion

Dial table with fixturingHigh speed automated packaging machine

Guarding enclosure using tempered glass

Roller system 14 on an inspection line

Pick and Place GantrySupport structure for drilling apparatus to clean spent fuel

remains from space shuttle solid fuel rocket boosters

Surface Mount Circuit Board Processing Machine

6Parker Hannifin Corporation

Industrial Profile Systems Business UnitHouston, TX 77066

Catalog 1816 IPSINDUSTRIAL PROFILE SYSTEMS800-333-4932Introduction

I

Examples of Industrial and MachineBuilding Applications

7IPSINDUSTRIAL PROFILE SYSTEMS


Houston, TX77066

800-333-4932

Catalog 1816Introduction

I




I

Examples of Industrial and MachineBuilding Applications

Guarding enclosures creating mountingsurfaces for hydraulic control system andpivoting enclosures providing safety for thework space.

Lighter Aluminum frame of a crane simulatorbooth, that offers lower total cost by utlizingsmaller hydraulic and pneumatic controlsystems components.

9IPSINDUSTRIAL PROFILE SYSTEMS


Houston, TX77066

800-333-4932


I

Flexible storage systems that allowingaccurate initial construction, and ability toadapt to new specifications.

Workstations creatinguniform work environment inassemble line applications.




I

20 Series40 Series

28 Series

30 Series

40 Series

12-120 p34

12-020 p34 12-124 p34 12-040 p34z 12-126 p34 12-081 p34 12-125 p34 10-041 p35 10-042 p35 10-083 p20

12-028 p31 12-128 p31 12-228 p31 12-328 p31 12-044 p31 12-043 p33 10-086 p20 10-085 p20

12-428 p32 12-528 p32 12-628 p32 12-728 p32 10-056 p 33

10-089 p2010-081 p21

12-030 p30 12-034 p 30 12-033 p30 12-060 p30 12-066 p30

10-680 p22 10-080 p22 10-180 p22

10-016 p21 10-540 p18 10-040 p18 11-040 p18 10-340 p19

10-140 p19 10-240 p19 10-440 p19 11-540 p18 10-043 p19

10-044 p20 11-044 p20 10-045 p20 10-060 p20

11-080 p22 14-428 p180 11-100 p24

11

IPSINDUSTRIAL PROFILE SYSTEMS


Houston, TX77066

800-333-4932


I

45 Series 50 Series

40 Series

10-088 p25 11-088 p25 11-089 p26 10-120 p23 11-120 p23

10-161p21

10-164 p23

11-140p 23

11-084 p24 11-124 p24

10-122 p 25 11-122 p 25 10-160 p26 11-160 p26

14-040 p28 14-045 p28 14-090 p28 10-550 p27 10-580 p27

11-128p24




I

Shaft & Clamp

Linear

Conduit

13-506 p153

13-510p155

13-514 p157 13-525 p161 13-566 p171

13-106p153

13-110p155

13-114p157

13-700p172

13-125p161

13-230p179

13-406p179

13-014p179

13-010p179

13-011p179

15-046p 51

15-040p51

15-041p52

15-083p52

15-086p51

15-080p51

13-220p180

13-025p179

15-120p51

15-160p51

15-081p52

15-121p52

15-161p52

15-162p53

15-122p53

15-082p53

15-042p53

15-085p53

13



Houston, TX77066

800-333-4932


I

Door

T-Slot Coverings

Slide

Gussetts

Safety Enclosures

Panel

Miscellaneous

12-031p36

12-032p37

12-023p36

12-828 p33

11-056 p27

10-036p27

14-450p181

14-150p181

14-100p182

14-160p182

12-012 p39 12-014 p39

12-013 p39 12-015 p39 12-018 p40

12-011 p39

12-022 p38

12-101p45

12-102p45

12-103p45

12-104p45

12-106p44

12-112p44

12-107p44

12-115p45

12-108p44

12-116p45

12-111p45

12-114p44

A40709 A40701 A40715 A40721

A40710 A40706 A40716 A40703

A40713 A40704 A40707 A40708

10-011p35

12-105p42

12-010p40

12-016p40

12-109p41

20-102Z4p42

21-057Z4p42

12-400p43

13-410p183

13-430p183

13-810p183

12-420p43

12-430p43

14-348p182

12-410 p43 12-421 p38



5

Catalog 1816Profiles

IPSINDUSTRIAL PROFILE SYSTEMS800-333-4932

y All structural IPS profiles are prime aluminum, mill-certified withmetallurgical properties of 6005-T5, 6061-T6, 6063-T6 or 6105-T5

specifications.y Yield (0.2 limit) Rm min. 240 N/mm2 (35,000 psi)y Tensile strength Rm min. 260 N/mm2 (38,000 psi)

Note: Cross sectional thickness variations of the profiles may influenceyield and tensile strength.

y Elongation for 2 in. long specimens:6005-T5 (thickness up thru 0.124 in.), 6061-T6 (up thru 0.249 in.), 6105-T5(up thru 0.5 in.) - 8% min6005-T5 (thickness 0.125-1 in.), 6061-T6 (0.25 in. and over) - 10% min

y Elasticity E approximately 70,000 N/mm2 (10,150 kpsi)y Brinell Hardness approximately 75 HB 2.5/187.5y The molecular structure of the 6005-T5 alloy is generally stable in an

ambient temperature range of:-40C to +200C-40F to +392F

Extreme temperature fluctuations may change the mechanicalproperties.

Profile Finish y Clear anodizing: AA M10, C22, A31, Cleary Black anodizing: AA M10, C22, A34, Blacky Minimum depth: 0.010mm (0.0004 in.)y Surface hardness: approximately 250 HV, outer surface exposedy Custom anodizing and protective finishes available

y Outer dimensions depending on size (0.2 - 0.4)mm.y Extrusions conforming to DIN 17 615 specifications and to IPS

blueprints.y Twist per 300mm (1 ft.) length not to exceed 0.25 and total twist over

6m (20 ft.) length not to exceed 1.5.y Flatness 0.10mm (0.004 in.) per 25mm (1 in.) of width.y Straightness 0.32mm (0.0125 in.) per 300mm (1 ft.) of length and not

exceeding 3mm (0.12 in.) over 6m (20 ft.) of extrusion.Maximum bow 3mm (0.12 in.) over 6m (20 ft.)

Tolerances

Defined Rest Points

Mechanical Properties

High Strength Aluminum Profiles

Technical Data

All 40, 30, 28, and 20 series profiles have a face to T-slot slope. Preload inthe material elastic range results in a vibration safe connection because theT-slot lips are pulled flush with the connecting surface. The high qualitymaterial used insures the profile T-slot will remember its original shape ifdisassembly is required, making all IPS profiles completely reusable.

Profile Series Preload Range40 0.2 mm30 0.2 mm28 0.2 mm20 0.1 mm

115

5



Houston, TX 77066

800-333-4932Catalog 1816Profiles

Standard SizeIncrements

Constant size increment permitscombination of all sizes and use ofcommon accessories.

30 Series40 Series

30 Series40 Series

Typical Dimensions

T-slot SystemHigh accuracy of T-slotsup to 80x40 Profile 8+.2mmfrom 80x80 Profile 8+.3mm

T-slot and pilot hole center to centertolerances are 0.2mm

20 Series28 Series

20 Series28 Series



5



10-016 21 16x40 Support 1.06 6.97 1.23 3.49 4.33 1.1710-036 27 36x36 Post 8.55 8.55 4.32 4.32 7.18 1.9410-040 18 40x40 Standard 9.46 9.46 4.73 4.73 6.65 1.7210-041 35 40x40 Clamp 11.4 11.4 5.55 5.55 7.4 2.310-042 35 40x40 Bi-Clamp 13 11.4 6.2 5.7 8.38 2.2610-043 19 40x40 Quarter Round 6.85 6.85 3.12 3.12 5.86 1.5810-044 20 40x40-45 Standard 6.71 6.71 2.98 2.98 5.68 1.5310-045 20 40-45 16.27 34.39 7.43 9.62 10.22 2.7610-060 20 40-60 12.73 42.73 6.08 10.93 9.35 2.7610-080 22 80x40 Standard 71.97 17.23 17.99 8.62 11.53 3.1810-081 21 16x80 Support 2.15 50.76 2.69 12.69 8.13 2.210-088 25 80x80 Standard 138.3 138.3 34.58 34.58 20.17 5.4510-120 23 40x120 Standard 220.54 24.22 36.76 12.11 16.12 4.3510-122 25 80x120 Standard 421.67 201.95 68.34 50.49 30.15 8.1410-140 19 40x40 Bi-Slot Corner 8.55 8.55 4.28 4.28 6.12 1.5910-160 16 160x80 Standard 922.5 271.1 115.3 67.8 38.1 10.2910-164 23 160x40 Standard 517.25 33.13 64.65 16.56 21.48 5.810-180 22 80x40 Tri-Slot Corner 65.87 16.37 16.46 8.19 10.9 2.8310-240 19 40x40 Bi-Slot Midframe 9.36 9.36 4.68 4.68 7.1 1.9210-340 19 40x40 Tri-Slot 9.13 9.82 4.57 4.78 6.75 1.8210-440 19 40x40 Mono-Slot 8.42 8.66 4.07 4.33 5.77 1.5610-540 18 40x40 Light 7.41 7.41 3.71 3.71 4.87 1.3510-550 27 50x50 19.7 19.7 7.88 7.88 9.81 2.7110-580 27 50x80 78.75 30.5 19.69 12.2 13.58 3.7510-680 22 80x40 Light 60.05 15.4 15.01 7.7 8.9 2.411-040 18 40x40 Heavy 14.18 14.18 7.09 7.09 9.22 2.5311-044 21 40x40-45 Heavy 9.4 9.4 4.07 4.07 7.33 1.9811-056 27 56x56 Heavy 45.62 45.62 14.81 14.81 13.07 3.5311-080 22 80x40 Heavy 102 26.73 25.5 13.37 16.59 4.5811-088 25 80x80 Heavy 185.2 185.2 46.3 46.3 26.01 7.0211-100 24 40x100 Heavy 190.29 30.84 38.06 15.42 17.88 4.9411-122 25 80x120 Heavy 575.07 274.46 92.75 68.61 40.08 10.8211-128 24 160x28 Heavy 732.11 20.45 91.51 14.36 31.33 8.4611-140 23 160x40 Heavy 749.51 54.8 93.6 27.4 32.3 8.7211-160 26 160x80 Heavy 1215.79 357.51 151.97 89.38 51.72 13.9611-540 18 40x40 Heavy Square 15.81 15.81 7.9 7.9 7.99 2.1612-020 34 20x20, 20 Series 0.72 0.72 0.72 0.72 1.85 0.5212-028 31 28x28 Quad-Slot 2.41 2.41 1.72 1.72 3.01 0.8112-030 30 30x30 3.13 3.13 2.09 2.09 3.31 0.912-033 30 30x30 Quarter Round 2.71 2.71 1.70 1.70 3.26 0.8812-034 30 30x30 Bi-Slot Corner 3.49 3.49 2.22 2.22 3.68 0.9912-040 34 40x40, 20 Series 8.55 8.55 4.27 4.27 4.9 1.3212-044 31 28x28-45 2 2 1.3 1.3 2.89 0.7812-060 30 30x60 21.1 6 7.04 4.01 6.1 1.6512-066 30 60x60 39 39 13 13 9.61 2.612-081 34 80x14, 20 Series 41.01 1.14 10.25 1.57 6.65 1.812-120 34 20x10 0.53 0.12 0.53 0.24 1.29 0.3512-124 34 20x40 5.01 1.27 2.5 1.27 3.18 0.8612-125 34 20x80 36.4 2.7 9.1 2.7 6.19 1.6712-126 34 20x60 16.02 2.04 5.34 2.04 4.73 1.2812-128 31 28x28 Tri-Slot 2.69 2.41 1.82 1.72 3.18 0.8612-228 31 28x28 Bi-Slot Corner 2.71 2.71 1.84 1.84 3.37 0.9112-328 31 28x28 Bi-Slot Midframe 3.02 2.43 2.16 1.73 3.37 0.9112-428 32 28x56 Open-Slot 4.67 16.56 3.33 5.91 5.66 1.5312-528 32 28x56 Tri-Slot 5.28 18.61 3.57 6.46 6.21 1.6812-628 32 28x56 Bi-Slot 5.92 18.05 4.23 6.44 6.39 1.7312-728 32 28x56 Quad-Slot 5.26 17.3 3.55 6.18 6.03 1.6314-040 28 45x45 Light 11.23 11.23 4.99 4.99 5.69 1.5714-045 28 45x45 15.81 15.81 7.03 7.03 8.25 2.2314-046 28 45x60 Light 17.3 28.52 7.69 9.51 8.88 2.414-090 28 45x90 32.2 124.4 14.31 26.74 15.25 4.12

Profiles by Part NumberPart # Page Description Moment of Inertia Section Modulus Section

(cm2)Weight(kg/m)IY

(cm4)IX

(cm4)WX

(cm3)WY

(cm3)

117

5



Houston, TX 77066


Servicing for Standard Fastening Set 40(20-002, 20-002SS, 20-014) requiresM8x16 tap and 7mm access hole throughthe profile.American Fastening Set (25-003) requires5/16-18 tap.

40 Series Profiles

Typical ServicingDimensions

Servicing for Universal Fastening Set 40(20-004, 25-004) requires bore 20mm x16mm deep into the slot.Pneumatic Universal Fastening Set(20-011) requires bore 20mm x 6mmdeep.



5



ApplicationProfile for general engineering structures, weight optimized.Basic fasteners: Standard & Heavy profile: 20-002, 20-004, 20-006,25-003,25-004 Light profile: 20-014, 20-011, 20-012

Technical DataAl, clear or black anodized

Part # IX IY WX WY Section Weight[cm4] [cm4] [cm3] [cm3] [cm2] [kg/m]

10-540 7.41 7.41 3.71 3.71 4.87 1.35 10-040 9.46 9.46 4.73 4.73 6.65 1.72 11-040 14.18 14.18 7.09 7.09 9.22 2.53

Description Unit Part #Clear Black

Profile 40x40 Light cut off max. 6M 10-540 10-540Bpkg of 16 at 3M ea. 10-540-3 10-540B3pkg of 16 at 6M ea. 10-540-6 10-540B6

Profile 40x40 Standard cut off max. 6M 10-040 10-040Bpkg of 16 at 3M ea. 10-040-3 10-040B3pkg of 16 at 6M ea. 10-040-6 10-040B6

Profile 40x40 Heavy cut off max. 6M 11-040pkg of 16 at 3M ea. 11-040-3pkg of 16 at 6M ea. 11-040-6

Saw cut necessary for cut to length 19-001

End Cap 40x40 1 pc 18-813Secure End Cap 40x40 1 pc 18-913

40 Series

Profile 40x40 Heavy SquareHeavy duty profile for engineeringstructures where T-slots are notdesirable. A 28x28 profile can slideinto the inside cavity. Accessories,such as hinges, may be attachedanywhere with required machining.Attachment to T-slot of a 40 seriesprofile requires machining (19-054)and fastening set (20-054).

Technical DataAl, clear anodizedFastening set 20-054 includes:aluminum block, M8 x 20 BHCS, flatplate, spring tension pin 8 x 40.

Description Unit Part #Profile 40x40 Heavy Square cut off max. 6M 11-540

pkg of 16 at 6M ea. 11-540-6Saw cut necessary for cut to length 19-001Fastening Set Pfl 40x40 Heavy Sq 1 set 20-054Service to mount Fast. Set 20-054 each 19-054End Cap 40x40 Heavy Square 1 pc 18-805

10-040

11-040


11-540 15.81 15.81 7.90 7.90 7.99 2.16

10-540

11-540

119

5



Houston, TX 77066


1

3

2

4

10-140

10-240

10-340

10-440

ApplicationGeneral engineering structures, weight optimized. Particularly useful wheresmooth, aesthetic appearance is desired. Use Light Standard Fastener(20-014). Profile 10-440 uses Flat Plate Fastener (20-028).



10-140 8.55 8.55 4.28 4.28 6.12 1.59 10-240 9.36 9.36 4.68 4.68 7.10 1.92 10-340 9.13 9.82 4.57 4.78 6.75 1.82 10-440 8.42 8.66 4.07 4.33 5.77 1.56 10-043 6.85 6.85 3.12 3.12 5.86 1.58


Profile 40x40 Bi-Slot Corner cut off max. 6M 10-140 10-140Bpkg of 16 at 3M ea. 10-140-3 10-140B3pkg of 16 at 6M ea. 10-140-6 10-140B6

Profile 40x40 Bi-Slot Midframe cut off max. 6M 10-240 10-240Bpkg of 16 at 3M ea. 10-240-3 10-240B3pkg of 16 at 6M ea. 10-240-6 10-240B6

Profile 40x40 Tri-Slot cut off max. 6M 10-340 10-340Bpkg of 16 at 3M ea. 10-340-3 10-340B3pkg of 16 at 6M ea. 10-340-6 10-340B6

Profile 40x40 Mono-Slot cut off max. 6M 10-440pkg of 16 at 3M ea. 10-440-3pkg of 16 at 6M ea. 10-440-6

Profile 40x40 Quarter Round cut off max. 6M 10-043Saw cut necessary for cut to length 19-001

End Cap 40x40 1 pc 18-813Secure End Cap 40x40 1 pc 18-913End Cap 40x40 Quarter Round 1 pc 18-843

1 Universal Fastening Set20-004 on 40x40 Bi-SlotCorner profile

2 Connecting three 40x40Quarter Round profiles usingCorner Connector 22-146and Connector Cap 18-821(p. 70)

3, 4 Connecting two 40x40Quarter Round profiles usingmiter cut and 90 miterconnector 20-128Z1 (p.62)

10-043

40 Series



5



40 Series

Profile 40-60 forhexagonalstructures

Profile 40-45 foroctagonalstructures

Profile 40x40x45 used in 45 Corner Elements(p.75) and with 40x40-45 Connector (p.70)

10-044

11-044

10-045

10-060

10-085

ApplicationProfiles 40x40-45 suitable for gusset applications or placing profiles at 45 anglewithin a structure. Profiles 40-45 and 40-60 can be used for polygonal shapedstructures. Profile, R40/80 are ideal for constructing cases, tables and angled bases



10-044 6.71 6.71 2.98 2.98 5.68 1.53 11-044 9.40 9.40 4.07 4.07 7.33 1.98 10-045 16.27 34.39 7.43 9.62 10.22 2.76 10-060 12.73 42.73 6.08 10.93 9.35 2.76


Profile 40x40-45 Standard cut off max. 6M 10-044 10-044Bpkg of 12 at 3M ea. 10-044-3 10-044B3pkg of 12 at 6M ea. 10-044-6 10-044B6

Profile 40x40-45 Heavy cut off max. 6M 11-044 11-044Bpkg of 9 at 3M ea. 11-044-3 11-044B3pkg of 9 at 6M ea. 11-044-6 11-044B6

Profile 40-45 cut off max. 6M 10-045pkg of 4 at 3M ea. 10-045-3pkg of 4 at 6M ea. 10-045-6

Profile 40-60 cut off max. 6M 10-060pkg of 4 at 3M ea. 10-060-3pkg of 4 at 6M ea. 10-060-6

Profile R40/80-30 cut off max. 6M 10-083Profile R40/80-45 cut off max. 6M 10-085Profile R40/80-60 cut off max. 6M 10-086Profile R40/80-90 cut off max. 6M 10-089


End Cap 40x40-45 1 pc 18-820End Cap 40-45 1 pc 18-845End Cap 40-60 1 pc 18-860

121

5



Houston, TX 77066


1 Profile 16x80 on Bearing Units 6

2 Profile 16x160 used for electronic mounting

3 Mounting element for Profile 16x40.See page 74.

ApplicationLight construction and support for such items as valves, limit switches, andheavy duty handle (see handles). Profile 16x80 can be used as baseplate on Bearing Units 6. Large surface area of the 16x160 with 8mm and 5mm T-slots provides convenient attachment of multiple accessories. Ideal as afixture plate for pneumatics, electrical valves and switches. Profile 16x160should not be used as a structural member.



10-016 6.97 1.06 3.49 1.23 4.33 1.17 10-081 50.76 2.15 12.69 2.69 8.13 2.20 10-161 287.1 3.66 35.89 4.10 12.78 3.45


Profile 16x40 cut off max. 6M 10-016 10-016Bpkg of 10 at 3M ea. 10-016-3 10-016B3pkg of 10 at 6M ea. 10-016-6 10-016B6

Profile 16x80 cut off max. 6M 10-081pkg of 10 at 3M ea. 10-081-3pkg of 10 at 6M ea. 10-081-6


Saw cut necessary for cut to length on 16x40 & 16x80 19-001Saw cut necessary for cut to length on 16x160 19-003

End Cap 16x40 1 pc 18-811End Cap 16x80 1 pc 18-812

Profile 16x160 used in pneumatic training station(photo courtesy of National Technology Transfer,Inc.)

40 Series

1

2 3

10-016

10-081

10-161



5



ApplicationGeneral engineering structures, weight optimized. 10-080 and 11-080 are suitablefor construction of linear slides with IPS roller systems; they can also be used forcompressed air piping.Basic fasteners: Standard & Heavy profile: 20-002, 20-004, 20-006, 25-003, 25-004

Light profile: 20-014, 20-011, 20-012Technical DataAl, clear or black anodized


10-680 60.05 15.40 15.01 7.70 8.90 2.40 10-080 71.97 17.23 17.99 8.62 11.53 3.18 10-180 65.87 16.37 16.46 8.19 10.90 2.83 11-080 102.00 26.73 25.50 13.37 16.59 4.58


Profile 80x40 Light cut off max. 6M 10-680pkg of 8 at 3M ea. 10-680-3pkg of 8 at 6M ea. 10-680-6


Profile 80x40 Tri-Slot Corner cut off max. 6M 10-180 10-180Bpkg of 8 at 3M ea. 10-180-3 10-180B3pkg of 8 at 6M ea. 10-180-6 10-180B6




40 Series

10-680

10-080

11-080

10-180

123

5



Houston, TX 77066



10-120 220.54 24.22 36.76 12.11 16.12 4.35 11-120 306.00 38.16 51.00 19.08 22.61 6.13 10-164 517.25 33.13 64.65 16.56 21.48 5.80 11-140 749.51 54.80 93.60 27.40 32.30 8.72

40 Series ApplicationSuitable as clamping and mounting surface (fixturing), vertical structural support,general heavy duty structures. Also used as header for bearing block assembliesfor Linear System 14 or 25. Suitable for multiple channel compressed air piping.

Technical DataAl, clear anodized

Description Unit Part #Profile 120x40 Standard cut off max. 6M10-120

pkg of 4 at 3M ea. 10-120-3 pkg of 4 at 6M ea. 10-120-6

Profile 120x40 Heavy cut off max. 6M11-120

Profile 160x40 Standard cut off max. 6M 10-164

Profile 160x40 Heavy cut off max. 6M 11-140 pkg of 4 at 3M ea. 11-140-3 pkg of 4 at 6M ea. 11-140-6



10-164

11-140

10-120

11-120



5



11-100 190.29 30.84 38.06 15.42 17.88 4.94 11-128 73.11 20.45 91.51 14.36 31.33 8.46 11-084 129.37 129.37 27.94 27.94 23.23 6.27 11-124 498.1 498.1 66.2 66.2 40.3 10.9

40 SeriesApplication11-100 and 11-128: General engineering structures,heavy duty applications. 160x28 is suitable as clampingand mounting surface (fixturing) used as header for bearingblock assemblies for Linear System 14 or 25.11-084 and 11-124: General engineering structures with very high loads or widespans. Useful as load bearing corner or post. Suitable for multiple channelcompressed air piping.


11-100

11-128

11-12411-084

Description Unit Part #Profile 40x100 Heavy cut off max. 6M 11-100

pkg of 8 at 3M ea. 11-100-3pkg of 8 at 6M ea. 11-100-6

Saw cut necessary cut to length 19-002


Saw cut necessary cut to length 19-003

Profile 80x80x40 Corner per meter 11-084Saw cut necessary cut to length 19-002

Profile 120x120x40 Corner per meter 11-124Saw cut necessary for cut to length 19-003



125

5



Houston, TX 77066


10-088

ApplicationGeneral engineering structures, heavy duty applications. For construction oflinear slides with IPS roller systems, can also be used for compressed air piping.



10-088 138.30 138.30 34.58 34.58 20.17 5.45 11-088 186.89 186.89 46.72 46.72 26.35 7.11 10-122 421.67 201.95 68.34 50.49 30.15 8.14 11-122 575.07 274.46 92.75 68.61 40.08 10.82

Description Unit Part # Clear Black




Profile 80x120 Standard cut off max. 6M 10-122pkg of 4 at 3M ea. 10-122-3



End Cap 80x80 1 pc 18-815Secure End Cap 80x80 1 pc 18-915End Cap 80x120 1 pc 18-841

10-122

11-122

40 Series

11-088



5



ApplicationGeneral engineering structures with very high loads or wide spans. For constructionof guides and slides with the Linear System 14 and 25. Suitable for multiplechannel compressed air piping. The 11-089 center area of the profile can be usedto house electrical or air lines, or as a manifold for pressurized air (150 psimaximum). A support bearing can be pressed into the center diameter to holdshafts or spindles for rotary or linear motion.



10-160 922.50 271.10 115.30 67.80 38.10 10.29 11-160 1215.79 357.51 151.97 89.38 51.72 13.96 11-089 215.85 215.85 53.96 53.96 36.26 9.83

Description Unit Part #

Profile 160x80 Standard cut off max. 6M 10-160

Profile 160x80 Heavy cut off max. 6M 11-160 pkg of 2 at 3M ea. 11-160-3 pkg of 2 at 6M ea. 11-160-6

Profile 80x80 Extra Heavy cut off max. 6M 11-089


End Cap 160x80 1 pc 18-818

40 Series

10-160

11-160

11-089

127

5



Houston, TX 77066


10-036

11-056

10-550

10-580

Post Profiles

ApplicationProfile 36x36 fits in cavity of 56x56 profile to create telescoping post for workstations and tables.56x56 profile suitable as corner post for tables, frames and machine guarding.Hollow square interior accommodates door and access panel counterweights.50x50 and 50x80 profiles suitable as leg support for 50x95 Conveyor Profile.Use Standard Fastener 50 (20-051) and Flat Plate Fastener (20-028).



10-036 8.55 8.55 4.32 4.32 7.18 1.94 11-056 45.62 45.62 14.81 14.81 13.07 3.53 10-550 19.70 19.70 7.88 7.88 9.81 2.71 10-580 78.75 30.50 19.69 12.20 13.58 3.75

Description Unit Part #Profile 36x36 Post cut off max. 3M10-036

Profile 56x56 Post cut off max. 6M11-056 pkg of 4 at 3M ea. 11-056-3 pkg of 4 at 6M ea. 11-056-6

Profile 50x50 cut off max. 6M10-550 pkg of 9 at 3M ea. 10-550-3 pkg of 9 at 6M ea. 10-550-6

Profile 50x80 cut off max. 6M10-580 pkg of 6 at 3M ea. 10-580-3 pkg of 6 at 6M ea. 10-580-6


Secure End Cap 56x56 1 pc 18-919End Cap 50x50 1 pc 18-810



5



End Cap 45ApplicationFor covering exposed end of 45 seriesprofiles.

Technical DataGlass-filled nylon, black

45 Series Profiles ApplicationProfiles for general engineeringstructures. Widely used in automotiveindustry for constructing framework forassembly and conveyor lines.Compatible with all Bosch hardware.


14-045

14-090

14-040

14-046


14-040 11.23 11.23 4.99 4.99 5.69 1.54 14-045 15.81 15.81 7.03 7.03 8.25 2.23 14-046 17.30 28.52 7.69 9.51 8.88 2.40 14-090 32.20 124.40 14.31 27.64 15.25 4.12

Description Unit Part #Profile 45x45 Light cut off max. 6M 14-040


Profile 45x45 cut off max. 6M 14-045pkg of 16 at 3M ea. 14-045-3pkg of 16 zt 6M ea. 14-045-6

Profile 45x60 Light cut off max. 6M 14-046



Description Unit Weight Part #End Cap 45x45 1 pc 9 g 17-813End Cap 45x90 1 pc 18 g 17-814End Cap 45x60 1 pc 11 g 17-815

129

5



Houston, TX 77066


30, 28 and 20Series Profiles

30, 28 and 20 series T-slots are smaller than 40 series T-slots requiringdifferent hardware. All hardware designed for use with 30, 28 or 20 seriesprofiles are designated with the appropriate series number at the end of thedescription.

Inventory Cart

Printer Stand

Safety Guards and Partitions

Mobil Parts Bin Rack



5



30 Series Profiles

1 2 3

ApplicationFor general structures, safety guard and partition frames, light duty enclosuresand industrial peripherals.



12-030 3.13 3.13 2.09 2.09 3.31 0.90 12-033 2.71 2.71 1.70 1.70 3.26 0.88 12-034 3.49 3.49 2.22 2.22 3.68 0.99 12-060 6.0 21.1 4.01 7.04 6.10 1.65 12-066 39.0 39.0 13.0 13.0 9.61 2.60Description Unit Part #

Clear BlackProfile 30x30 cut off max. 6M 12-030


Profile 30x30 Quarter Round cut off max. 6M 12-033 12-033B

Profile 30x30 Bi-Slot Corner cut off max. 6M 12-034




End Cap 30x30 1 pc 18-803End Cap 30x60 1 pc 18-863End Cap 60x60 1 pc 18-866

54

1-2 Servicing for Standard Fastener 28/30 (20-003)

3 Servicing for Universal Fastener 30(20-008) and for Butt-Fastener M6 (20-012)

4 Connecting three 30x30 Quarter Roundprofiles using Corner Connector 30 (22-150)and Radius Connector Cap 30 (22-151)

5 Corner connector 30 (see page 70)

12-066

12-030

12-033

12-034

12-060

131

5



Houston, TX 77066


28 Series Profiles

1 32

ApplicationSafety guard and partition frames, light duty enclosures and industrial peripheralssuch as parts racks, etc. Also suitable for interior design and other commercialapplications.Technical DataAl, clear or black anodized


12-028 2.41 2.41 1.72 1.72 3.01 0.81 12-044 2.00 2.00 1.30 1.30 2.89 0.78 12-128 2.69 2.41 1.82 1.72 3.18 0.86 12-228 2.71 2.71 1.84 1.84 3.37 0.91 12-328 3.02 2.43 2.16 1.73 3.37 0.91


Profile 28x28 Quad-Slot cut off max. 6M 12-028 12-028Bpkg of 25 at 3M ea. 12-028-3 12-028B3pkg of 25 at 6M ea. 12-028-6 12-028B6

Profile 28x28-45 cut off max 6M 12-044 12-044Bpkg of 25 at 3M ea. 12-044-3 12-044B3pkg of 25 at 6M ea. 12-044-6 12-044B6


Profile 28x28 Bi-Slot Corner cut off max. 6M 12-228 12-228Bpkg of 25 at 3M ea. 12-228-3 12-228B3pkg of 25 at 6M ea. 12-228-6 12-228B6

Profile 28x28 Bi-Slot Midframe cut off max. 6M 12-328 12-328Bpkg of 25 at 3M ea. 12-328-3 12-328B3pkg of 25 at 6M ea. 12-328-6 12-328B6


End Cap 28x28 1 pc 18-808End Cap 28x28-45 1 pc 18-844

1-2 Servicing for Standard Fastener 28 (20-003)

12-028

12-044

12-128

12-228

12-328



5



28 Series ApplicationSafety guard and partition frames, light duty enclosures and industrial peripheralssuch as parts racks, etc. Also suitable for interior design and other commercialapplications.



12-428 16.56 4.67 5.91 3.33 5.66 1.53 12-528 18.61 5.28 6.46 3.57 6.21 1.68 12-628 18.05 5.92 6.44 4.23 6.39 1.73 12-728 17.30 5.26 6.18 3.55 6.03 1.63


Profile 28x56 Open-Slot cut off max. 6M 12-428 12-428Bpkg of 8 at 3M ea. 12-428-3 12-428B3pkg of 8 at 6M ea. 12-428-6 12-428B6


Profile 28x56 Bi-Slot cut off max. 6M 12-628 12-628Bpkg of 8 at 3M ea. 12-628-3 12-628B3pkg of 8 at 6M ea. 12-628-6 12-628B6

Profile 28x56 Quad-Slot cut off max. 6M 12-728 12-728Bpkg of 8 at 3M ea. 12-728-3 12-728B3pkg of 8 at 6M ea. 12-728-6 12-728B6


End Cap 28x56 1 pc 18-809

12-428

12-528

12-628

12-728

133

5



Houston, TX 77066


ApplicationSafety guard and partition frames, light duty enclosures and industrial peripheralssuch as tool hangers, etc. Also suitable for interior design and other commercialapplications.

Technical DataAl, clear


12-043 2.71 2.71 1.84 1.84 3.49 0.95 10-056 29.55 29.55 14.78 14.78 8.51 2.31

Description Unit Part #

ClearProfile 28x28 Qtr Round cut off max. 6M 12-043

Profile 28x28 Tool Hanger cut off max. 6M 12-828 Light

Profile 56x56 Light cut off max. 6M 10-056


10-056

12-043

12-828

28 Series



5



12-020

20 Series Profiles

12-120

12-124

12-040


12-120 0.12 0.53 0.24 0.53 1.29 0.35 12-020 0.72 0.72 0.72 0.72 1.85 0.52 12-124 1.27 5.01 1.27 2.50 3.18 0.86 12-040 8.55 8.55 4.27 4.27 4.90 1.32 12-126 2.04 16.02 2.04 5.34 4.73 1.28 12-125 2.70 36.40 2.70 9.10 6.19 1.67 12-081 1.14 41.01 1.57 10.25 6.65 1.80

Description Unit Part #Profile 20x10 cut off max. 3M 12-120

pkg of 32 at 3M ea. 12-120-3

Profile 20x20 cut off max. 3M 12-020pkg of 32 at 3M ea. 12-020-3

Profile 20x40 cut off max. 3M 12-124pkg of 16 at 3M ea. 12-124-3

Profile 40x40, 20 Series cut off max. 3M 12-040pkg of 8 at 3M ea. 12-040-3

Profile 20x60 cut off max. 3M 12-126




End Cap 20x10 1 pc 18-830End Cap 20x20 1 pc 18-802End Cap 20x40 1 pc 18-831End Cap 40x40, 20 Series 1 pc 18-832End Cap 20x60 1 pc 18-834End Cap 20x80 1 pc 18-835End Cap 80x14 1 pc 18-833

1 2 3

12-081

12-126

12-125

1-2 Servicing for Std. Fastener 20 (20-021)3 Servicing for Univ. Fastener 20 (20-040)

Application20 series profiles can be used for lightduty enclosures and miniaturemodeling. Also useful as an accessoryextrusion where small profiles areneeded. 5mm T-slot requires 20series hardware.


135

5



Houston, TX 77066


40x40 Clamp Profile

10-041

10-042

10-011

Guarding and Enclosure Application Profiles

Application40x 40 clamp profiles suitable for construction of guards, enclosures, swingingand sliding doors. Accommodates corrugated mesh, sheet metal and plasticpanels up to 9.5 mm thick. Clamped panel adds rigidity to the frame. Bi-clampprofile designed for use as inner post in subdivided panels of large guarding,sliding and swinging doors. Clamp profiles are serviced for screws on 200 2mm centers. Shipped complete with clamping strip (10-011) and M6x16 SHCS.In addition to being a part of 40x40 clamp profiles, edging profile can also beused as a handle or stiffener for panels.



10-041 11.40 11.40 5.55 5.55 7.40 2.30 10-042 13.00 11.40 6.20 5.70 8.38 2.26 10-011 0.30

Description Unit Part #Profile 40x40 Clamp cut off max. 6M 10-041


Profile 40x40 Bi-Clamp cut off max. 6M 10-042

Edging Profile cut off max. 6M 10-011pkg of 10 at 3M ea. 10-011-3pkg of 10 at 6M ea. 10-011-6



2

1 3

4

1 Proper assembly of bi-clamp profile2 Recommended penetration of the panels into the clamp profiles3-4 Application examples5 Edging profile used as door handle on sliding door

5



5



32x18 PictureFrame Profile

1 Profile 32x18 Mono-slot mitre cut at 45used on a framed door

2 Assembly of 90 Mitre Connector MD(order Mitre Bracket and set screwseparately)

3 Panel dimensions

1

2

3

12-031

20-128Z1

12-108

12-023

ApplicationPicture frame guarding andenclosures. Accepts panel 10mm (3/8) thick without using gasket, 6mm(1/4) thick with Panel Gasket 10 (12-108). Recess for magnetic or foam tapeto provide tight seal for noise or dustprotection. Easy assembly with 90Mitre Connector MD (20-128Z1).

Description Unit Part #Profile 32x18 Mono-Slot cut off max. 6m 12-031Profile 22x32 Light cut off max. 6m 12-032Profile 32X22 Slot 12-023


Panel Gasket 10 cut off max. 125m 12-10890 Mitre Connector MD 1 pc 20-128Z1Mitre Bracket 1 pc 20-127

Technical DataAl, clear anodizedWeight 0.94 kg/m

Loctite Thread Locker No. 262recommended to secure setscrews.

End cap 18-807 can not be used withthis profile.

137

5



Houston, TX 77066


3

Profile 32x18 Bi-Slot

Description Unit Part #Profile 32x18 Bi-Slot cut off max. 6M 12-032

pkg of 10 at 3M ea. 12-032-3 pkg of 10 at 6M ea. 12-032-6


End Cap 32x18 1 pc 18-807Fastening Set for 32x18 Bi-Slot Pfl 1 set 20-132Clamp Spring 1 pc 22-032


Fastening Set: St, galvanizedWeight 9g

Clamp Spring: StWeight 4g

ApplicationSuitable for guarding, sliding doorsand enclosures. Panel up to 9mm thickmay be clamped using clamp spring.Number of clamps depends on panelsize and load. Panel gaskets 12-106and 12-108 can be used to secure6mm (1/4) panel in T-slots.

12-032

20-132

1 Assembly of panel frame using Profiles32x18 Bi-slot for use on Rolling DoorGuide Profile (12-022)

2 Frame for panels 8mm thick withoutgasket or 6mm thick with Panel Gasket 8(12-106)

3 Milling of 8mm slot is required forFastener (20-132) when using 8mmslot for panels.

4 Frame for holding panels with Clamp Spring(22-032) or Panel Gasket 10 (12-108).

2

4

22-032



5



21-067

12-022

21-068

Rolling Door Guide

ApplicationExcellent solution for large doors with removable door panels for maintenance.Example: case packers, material handling and packaging installations,enclosures for large machinery.

Description Unit Part #Rolling Door Guide Profile cut off max. 4M 12-022Saw cut necessary for cut to length 19-001

Guide Insert Set 1 set 21-067Roller Insert Set 1 set 21-068UHMW Guide Profile cut off max 3.1M 12-421

1 Length of vertical door frame member: B = A - 112 mm.For 6mm panel with panel gasket 8 (12-106): C (panel height)= B + 16 mm.For 8mm panel without gasket: C (panel height) = B + 23 mm

2-3 Connection methods for assembling the Door Guide to 40 series profiles4 Attaching the 32x18 framed door to the Door Guide Profile. Mitre connection of 32x18

Bi-Slot profile (12-032) for door frame is NOT recommended. See page 23 for detail of doorframe.

1

3

42

12-421

Technical DataProfile: Al, clear anodized. Weight 1.78 kg/mGuide Insert: Roller Insert: UHMW, white Roller: Delrin, black with M6x16 Flat point set screw Housing: Al, anodized Weight 45 g Pin: Stainless Steel

139

5



Houston, TX 77066


12-014

12-015

Sliding Door Guide

12-012

12-013

Application

To guide light duty panels as slidingwindows and access ports for safetyguards and enclosures. Installationonto 40, 30 or 28 Series profiles isaccomplished without fasteners bysnapping into T-slot. Design of lowerguide reduces friction of sliding panels.Design of upper guide facilitates easy,lift-out removal of door withoutdisassembly of structure.

Description Unit Part #Sliding Door Guide 40, Upper cut off max. 3M 12-012

pkg of 10 at 3M ea. 12-012-3

Sliding Door Guide 40, Lower cut off max. 3M 12-013pkg of 10 at 3M ea. 12-013-3

Sliding Door Guide 30/28, Upper cut off max. 3M 12-014pkg of 10 at 3M ea. 12-014-3

Sliding Door Guide 30/28, Lower cut off max. 3M 12-015pkg of 10 at 3M ea. 12-015-3


40 Series

28/30 Series

ApplicationDesigned as a combination handle andstiffener for sliding panel doors 1/4 thick.Panels snap into the profile slot and maybe additionally secured by an adhesiveor fastener.

Description Unit Part #Stiffener/Handle Profile cut off max. 3M 12-011

pkg of 10 at 3M ea. 12-011-3



Stiffener/Handle Profile

B = A - 15mm for removable doorsB = A - 10mm for non-removable doors

Technical Data

Al, clear anodizedThree tracks for panels up to 6.4mm(1/4") thickWeight: 12-012, 12-014 0.45 kg/m 12-013, 12-015 0.50 kg/m



5



Panel HolderApplicationProfile designed for panels 3- 6mm thick.Built-in seal for splash guard applications.Can be used for 40, 30 and 28 seriesprofiles.

Technical DataRigid PVC base, with vinyl lip sealWeight 0.16 kg/m

Description Unit Color Part #Panel Holder Profile cut off max. 3M black 12-016B

cut off max. 3M gray 12-016GSaw cut necessary for cut to length 19-001

Mesh Clamp

ApplicationCaptures wire mesh panel up to 5.5mmthick. Excellent for constructing safetyguards when mesh needs not beremovable. Installation onto 40, 30 or28 series profiles is accomplishedwithout fasteners by pressing into T-slot. Support stanchion becomesintegral part of panel frame.

Technical DataAl, clear anodizedProfile is tapped M6 every 200mm 2mm. Includes clamp strip and M6x6flat point set screws.Weight 0.53 kg/m

Description Unit Part #Mesh Clamp Profile cut off max. 4M 12-010

pkg of 10 at 4M ea. 12-010-4Saw cut necessary for cut to length 19-001

Panel Extrusion 40

Description Unit Part #Panel Extrusion 40 cut off max. 6M 12-018Saw cut necessary for cut to length 19-001

ApplicationExtrusion for mounting 34mm (1.34")thick insulation panels onto 40 seriesprofiles. Extrusion can be servicedto mount on profile using T-slot nuts.Can also be mounted with doublesided tape.


Position for clearance of Std. Fastener

Wire Mesh Size: A x B less 6 to 10 mm

Length = A- 1 mm

Length = B - 33mm

141

5



Houston, TX 77066


Rack Angle

Description Unit Part #Clip Nut M5* 1 pc 20-075Clip Nut M6 1 pc 20-076

Technical DataSt, zinc platedWeight 5g

* Due to almost identical geometric anddimensionsal shape of M5 and #10-32 UNFthreads, standard #10-32 screws will fit in M5 ClipNut.

ApplicationSquare nut with clip attachment for 19"Rack Angle. Nut snaps into squareholes for attaching panels and acces-sories.

Technical DataAl, clear anodizedComplete with M6x12 flat point setscrews.

Weight:12-109M 0.62 kg/m12-110M 0.63 kg/m

ApplicationUsed for attaching standard 19" rackor other panel to 40 series profile(30 and 28 series profiles permited,rack angle must be inserted fromprofile end). Clip nuts for panelmount snap into square holes.Blank Rack Angle can be machinedto mount any accessories (see 1/4Turn Receptacle).

1

32

54

Description Unit Part #19" Rack Angle cut off max. 2.048M 12-109MRack Angle, Blank cut off max. 2.048M 12-110MSaw cut necessary for cut to length 19-001

(19)

12-110M

12-109M

Clip Nut

27

67

10.550.5

1 Mounting dimensions2 Inserting rack angle into 40 series T-slot3 Rack Angle is secured in T-slot with set

screw M6x124 Panel is attached to Rack Angle with M5 or

M6 screw and clip nut5 Non-removable panels can be attached to

the blank Rack Angle with double-sidedtape



5



Description Unit Part #Clamp Bar Profile cut off max. 2M 12-105Saw cut necessary for cut to length 19-001

ApplicationFor attachment of 40 series profiles tobase plates and other parts. Must beused in pairs to accomplish properclamping of the profile. Notrecommended for use on linearapplications.


Clamp Bar

Description Unit Part #L-Bracket Profile cut off max. 3M 21-057Z4Saw cut necessary for cut to length 19-002

L-Bracket Profile

ApplicationCan be cut and machined for customfloor mounting or other types ofbrackets. Anodizing on request. Forstandard floor mounting brackets seepage 82.

Technical DataAl, mill finishWeight 7.52 kg/m

Description Unit Part #Gusset Profile cut off max.3M 20-102Z4Saw cut necessary for cut to length 19-002

Gusset Profile

ApplicationCan be cut and machined for customgussets and support structures.Anodizing on request. For standardgusset brackets see page 74.

Technical DataAl, mill finishWeight 4.84 kg/m

143

5



Houston, TX 77066


12- 410

Description Unit Part #UHMW Slide Bar 40x40 cut off max. 3M 12-400

UHMW Slide Bar 40x10 cut off max. 3M 12-420UHMW Slide Bar 40x10, Antistatic cut off max. 3M 12-420B

UHMW Slide Bar 28/30x8 cut off max. 3M 12-430

UHMW Slide Strip cut off max. 3M 12-410


UHMW Slide Bar

UHMW slide bar 28/30 between two profiles UHMW slide strip on a parallel application

ApplicationDurable, low-friction material, self-lubricating and easily machined.Provides a smooth gliding surfaceon a wide range of applications,from linear systems to adjustablework surfaces.Use Slides Bars 12-400 and 12-420 for40 series profiles, 12-430 for 28 and30 profiles. Slide Strip 12-410 can beused with all 40, 30 and 28 seriesprofiles.

Technical DataUHMW, whiteUHMW, black antistatic (12-420B)

12- 430

12- 420

12- 400



5



12-106M

ApplicationPanel gasket fits 6mm panels. Meshgasket for 12 Gage wire mesh. Bothfor use on 40, 30 and 28 series pro-files.

Panel & Mesh Gaskets 8

Description Unit Part #Anti-Skid Cover 40 cut off max. 20M 12-114

Anti-Skid Cover Technical DataRubber, blackHardness 80 shoreWeight 180 g/m

Description Unit Part #Panel Gasket 8 cut off max. 30.5M 12-106M

30.5m roll 12-106R

Mesh Gasket 8 cut off max. 30.5M 12-107M30.5m roll 12-107R

12-106 12-107

ApplicationCover for 40 series profiles only, is usedfor non-slip surfaces such as laddersand stops for sliding doors. Oil and wa-ter resistant.

Technical DataMolded vinyl, greyWeight 40 g/m

Description Unit Part #Vinyl Panel Gasket 10 cut off max. 125m 12-108

Panel Gasket 10

Technical DataClear vinylWeight 90 g/m

ApplicationFlexible vinyl gasket for use in 10mmT-slots of 32x18 profiles and 45series profiles. Holds 6mm (1/4")panels.

12-031 12-032 45 seriesprofile

Safety CoverApplicationFor caution areas of 40, 30 or 28 seriesguards and enclosures.

Technical DataRigid PVC, yellowWeight 0.3 kg

Description Unit Part #Safety Cover Strip 1 pc at 3M 12-112

12-107M

145

5



Houston, TX 77066


T-Slot Cover

1 2

Technical DataCover/gasket: Polypropylene, semi-clear, black or yellow

PVC cover, black or blue

Aluminum cover, clear or black anodized

3

1 Entire T-slot cross section can beutilized as a raceway for wiring andpiping

2 Aluminum cover strip is easily cutoff with tin snips. See services and tools

3 Engraved information plates can be madefrom segments

4 Cover/gasket strip used as a T-slot cover

5 Cover/gasket strip used as a gasket

ApplicationDust-tight covers and gaskets for allIPS profiles. Covers provide flushsurfaces, making the entire T-slotavailable as conduit for wiring andpiping. Aluminium covers are easilyengraved.

12-101

12-102

Description Unit Weight Color Part #Cover/Gasket Strip 40 1 pc at 2M 52 g clear 12-101

black 12-101Byellow 12-101Y

Cover/Gasket Strip 28 1 pc at 2M 33 g clear 12-103black 12-103Byellow 12-103Y

Cover/Gasket Strip 20 1 pc at 2M 27 g clear 12-115black 12-115B

PVC Cover Strip 40 1 pc at 2M 44 g black 12-111Bblue 12-111BL

PVC Cover Strip 30/28 1 pc at 2M 27 g black 12-116B

PVC Cover Strip 45 1 pc at 2M 59 g black 17-111B

Aluminum Cover Strip 40 1 pc at 2M 50 g clear 12-102black 12-102B

Aluminium Cover Strip 30/28 1 pc at 2M 35 g clear 12-104black 12-104B

12-103

12-115

12-104

17-111B

12-116B

Inquire about quantity discounts

12-111B

a= max 1.5-2mm (20 series)a= 4-6mm (40 series)a= 6mm (28,30 series)

4 5



5



End Caps ApplicationFor covering the ends of profiles afterapplication assembly.


Description (Size AxB) Unit Weight (g) Part #40 Series

40x40 1 pc 7 18-81340x40 Heavy Square 1 pc 10 18-80540x40 Quarter Round 1 pc 18-84380x40 1 pc 15 18-81440x100 1 pc 20 18-80480x80 1 pc 28 18-81540x120 1 pc 22 18-84080x120 1 pc 43 18-84116x40 1 pc 4 18-81116x80 1 pc 6 18-81216x160 1 pc 10 18-806160x28 1 pc 20 18-816160x40 1 pc 28 18-817160x80 1 pc 66 18-81840x40-45 1 pc 6 18-82040-45 1 pc 18-84540-60 1 pc 18-86050x50 1 pc 10 18-810

30 Series30x30 1 pc 18-80330x60 1 pc 18-86360x60 1 pc 18-866

28 Series28x28 1 pc 4 18-80828x56 1 pc 8 18-80928x28-45o 1 pc 18-844

20 Series20x10 1 pc 0.5 18-83020x20 1 pc 1 18-80220x40 1 pc 2 18-83140x40, 20 series 1 pc 4 18-83220x60 1 pc 3 18-83420x80 1 pc 4 18-83580x14 1 pc 3 18-8337mm Access Hole Plug 1 pc 18-710

See Conduit section for Conduit Caps

ApplicationUsed for covering the ends of profiles.End cap can be additionally securedwith M4x12 flat head screw (orderseparately) and can be re-used afterscrew removed. No profile servicing isrequired.

Technical DataGlass-filled nylon, blackScrew - St., black oxide

Secure End Cap

Description Unit Weight Part #Secure End Cap 40x40 1 pc 7 g 18-913Secure End Cap 40x80 1 pc 23 g 18-914Secure End Cap 80x80 1 pc 26 g 18-915Secure End Cap 56x56 1 pc 18-919M4x12 Flat Head Cap Screw pkg of 100 24-212-4

40, 30 & 28 Series 20 Series

147

5



Houston, TX 77066


Modular Dimensions

Conduit Elements The conduit elements for cable and hoseinstallation offer great variety and arequickly and easily assembled. Anodizedaluminum profiles provide rigidity withlow weight. The elements are in the40mm modular dimension and are fullycompatible with all other standardelements.

The conduit elements are resistant totwisting; which is very important in acantilevered application. They may beintegrated into the construction as astructural support.

The conduit is made up of high tensilestrength aluminum elements:y Wall duct profile 40, 80 and 120y Conduit support profile 40, 80, 120 and 160 (with or without T-slot)

Assembly ofConduit Elements

Wall duct profiles of any required lengthare snapped into a support profile.Another support profile closes the ductwith a "snap in" fit. The conduit may besecured with screws where necessary.

1 Scored groove forlocating locking screw(24-695) in Support Pro-file.

2 Locking screw turnedinto the pre-extrudedthreads of the supportwall profiles.

1

2



5



Assembly ofConduit Elements

1 May be attached to anyIPS profile using standardT-slot fastening methodssuch as the T-slot nuts

2-3 Scored groovessimplify locating of anynecessary holes

4 The cable duct may beopened with a screw driver

5 Wall segments with orwithout predrilled holes canbe provided

6 The conduit cross-section may be reduced orenlarged for customizedapplications

7 Conduits are lengthenedby overlapping (staggering)support and wall profiles

8 Openings may beproduced by sliding theprofiles

9-10 Switch box made ofconduit elements

9 10

8

7

6

5

1 4

32

149

5



Houston, TX 77066


ApplicationExamples

4

1 Transfer systeminstallation with conduitelements

2 Cable exits in wallsegment 160x80

3 Distribution panelconstructed of conduit80x80

4 Pneumatic controlsystem with separateinstallation of cables andhoses with conduits80x40

5 Assembly of conduitelements mitered at 45

31

2

5



5



Cross SectionsConduits without T-slots1 40x402 40x803 40x1204 40x1605 80x406 80x807 80x1208 80x1609 80x80-4510 120x4011 120x8012 120x12013 120x16014 80x160-20

Conduits with T-slots on one side15 40x4016 40x8017 40x12018 40x16019 80x4020 80x8021 80x12022 80x16023 80x80-4524 120x4025 120x8026 120x12027 120x16028 80x160-20

Conduits with T-slots on both sides29 80x8030 80x12031 80x16032 120x8033 120x12034 120x160

Conduits with Partitions35 40x8036 40x12037 40x16038 80x8039 80x12040 80x16041 120x8042 120x12043 120x160

16 17 18

24 25

20 21 22 23

26 27 28

29 30 31

32 33 34

1

5

10

2 3 4

6 7 8 9

11 12 13 14

15

19

35 3736

38 4039

41 42 43

151

5



Houston, TX 77066


Conduit Support

Transparent Cover ApplicationTransparent cover profiles for conduitelements designed for easy viewing ofconduit contents. Snaps into placewith standard conduit elements.

15-046

ApplicationBottom or cover element for conduitassemblies.

15-040 15-080

15-16015-120

15-086

Technical DataAl, clear anodizedWeight, kg/m

15-040 0.4915-080 0.7615-120 0.9815-160 1.25

Description Unit Part #Support Profile 40 cut off max. 6M 15-040



Support Profile 80 cut off max. 6M 15-080pkg of 10 at 3M ea. 15-080-3pkg of 10 at 6M ea. 15-080-6






Technical DataPlastic, clearWeight, kg/m

15-046 0.1515-086 0.24

Description Unit Part #Transparent Cover Profile 40 cut off max. 3M 15-046

pkg of 10 at 3M ea. 15-046-3

Transparent Cover Profile 80 cut off max. 3M 15-086pkg of 10 at 3M ea. 15-086-3




5



Conduit Supportwith T-Slot

Description Unit Part #Support Profile 40 w/ T-slot cut off max. 6M 15-041



Support Profile 80 w/ T-slot cut off max. 6M 15-081pkg of 10 at 3M ea. 15-081-3pkg of 10 at 6M ea. 15-081-6


Support Profile 120 w/T-slot cut off max. 6M 15-121pkg of 10 at 3M ea. 15-121-3pkg of 10 at 6M ea. 15-121-6


Support Profile 160 w/T-slot cut off max. 6M 15-161pkg of 10 at 3M ea. 15-161-3pkg of 10 at 6M ea. 15-161-6


15-08115-041

Description Unit Part #TS35 DIN Rail Profile cut off max. 6M 15-083



TS35 DIN Rail

ApplicationRail for mounting terminal blocks andcircuit breakers. Snaps into place onConduit Support Profile w/ T-slots 80,120 and 160.


15-121 15-161

Locking screw (24-695) optional

Technical DataAl, clear anodizedWeight, kg/m 15-041 0.60 15-081 1.32 15-121 1.68 15-161 2.29

ApplicationBottom or cover element for conduitassemblies. T-Slots accept all 40series hardware.

15-083

153

5



Houston, TX 77066


ApplicationUsed for sides of conduit and as adivider for separating interior channels.

Wall Duct Profile

Angled Support

ApplicationCover element for conduit assemblies.Snaps into place with duct wall supportprofile 80. Attractive and suitable tobuild consoles and control boxes.

Technical DataAl, clear anodizedWeight, kg/m 15-085 1.03 15-162 1.20

Description Unit Part #Support Profile 80x80-45 cut off max. 6M 15-085


Support Profile 160-20 cut off max. 6M 15-162pkg of 10 at 3M ea. 15-162-3pkg of 10 at 6M ea. 15-162-6


15-042

15-082 15-122

15-162

15-085

Technical DataAl, clear anodizedWeight, kg/m 15-042 0.21 15-082 0.55 15-122 0.81

Description Unit Part #Wall Duct Profile 40 cut off max. 6M 15-042


Wall Duct Profile 80 cut off max. 6M 15-082pkg of 10 at 3M ea. 15-082-3pkg of 10 at 6M ea. 15-082-6

Wall Duct Profile 120 cut off max. 6M 15-122pkg of 10 at 3M ea. 15-122-3pkg of 10 at 6M ea. 15-122-6




5



Conduit Caps


ApplicationFace covering for sealing the endopenings of Conduit Systems. Not foruse on 40 series profiles.

Description (AxB) Unit Weight (g) Part #Conduit Cap 40x40 1 pc 8 15-803

80x40 1 pc 14 15-80480x80 1 pc 30 15-80540x120 1 pc 30 15-81080x120 1 pc 50 15-811120x120 1 pc 70 15-812120x160 1 pc 90 15-813160x40 1 pc 30 15-806160x80 1 pc 58 15-80780x80-45 set of 2, R/L 50 15-808160x80-20 set of 2, R/L 100 15-809

Recommended location of 5mm hole for lockingscrew on custom conduit caps (note orientation)

155

5



Houston, TX 77066


Locking Screw

ApplicationLocking screw for conduit assembliesand conduit caps. The screw breaksanodized coating and establishes apositive ground between the profiles

Technical DataSt, galvanized4.2 x 9.5mm, DIN 7971Weight 2 g

Description Unit Part #Locking Screw 4.2 x 9.5 1 pc 24-695


Industrial Profile Systems Business UnitHouston , TX 77066

HardwareCatalog 1816

800-333-4932IPSINDUSTRIAL PROFILE SYSTEMS

40 Series Standardwith T-slot Nut

40 Series Heavywith T-Nut HD

40 Series Heavywith T-slot Nut

2,500 N(560 lbs)

8,000 N(1,800 lbs)

5,000 N(1,125 lbs)

Two pieces of 40x40 Heavy profile were assembled to form a tee with a standardfastener and a button head screw. Force was applied until the tee started toseparate. The profile failed before the fastener. The profiles were still held to-gether at the end of the test. There were no catastrophic failures. Extra screwlength beyond standard 20mm did not significantly change test results.

Pull Test

Safe Load

Hardware and Fastening Components

Engaged ForceScrew length N LbsM8x20 15 mm 24,954 5,609M8x25 20 mm 25,354 5,699M8x30 25 mm 26,777 6,019

22


Houston, Tx 7706657

800-333-4932 IPSINDUSTRIAL PROFILE SYSTEMS

Catalog 1816Hardware

THREAD SIZE FOR PROFILE SERIES40 30 28 20

Standard Fastener M 5 20-021M 8 20-002, 20-002SS 20-003, 20-003SS5/16-18 25-003

Universal Fastener M 4 20-040M 6 20-008 20-005 1M 8 20-0045/16-18 25-004

T-Slot Nut, St M 4 20-044M 5 (#10-32) 4 20-052 20-052 20-045M 6 20-056, 20-056SS 20-056, 20-056SS 20-055 1M 8 20-058, 20-058SS 20-058, 20-058SS 20-057 11/4-20 25-001 25-0015/16-18 25-002 25-002

Double T-Slot Nut M 8, A=24 20-049 20-049M 8, A=40 20-050 20-050

HD T-Slot Nut 1,2 M 6 20-060M 8 20-064

Double HD T-Slot Nut 1 M 8 20-063

Economy T-Slot Nut 1,3 M 4 20-084M 5 (#10-32) 4 20-085M 6 20-080 20-090 20-090M 8 20-081, 20-081SS 20-091 20-0911/4-20 20-083 20-093 20-0935/16-18 20-082 20-092 20-092

Offset Economy T-Slot Nut 1,3 M 6 20-190 20-190 20-190M 8 20-1811/4-20 20-193 20-193 20-1935/16-18 20-182

T-Slot Nut, Zn M 3 20-033 20-036 20-036M 4 20-034 20-037 20-037M 5 (#10-32) 4 20-035 20-038 20-038

Notes:1) T-Slot Nut must be inserted from profile end.2) Retainer Spring 20-0614 is available for HD T-Slot Nuts.3) Retainer Springs 24-719-6 and 24-719-8 are available for M6 (1/4-20) and M8 (5/16-18) Economy T-Slot Nuts.4) Due to the almost identical geometric and dimensional shape of M5 and #10-32 UNF threads, standard #10-32 screws will fit in all M5 T-Slot Nuts.

20-003,20-003SS

Basic Fastening Components





Profile Dimensions (mm) Torque Weight Series Type A Hex B C D E F G H K L (Nm) (g) Part #

Std M8x20 25 25 20-00240 SS M8x20 5 36 7.8 17 11 2.9 16 40 20 7 20 21 20-002SS SAE 5/16-18x3/4 3/16 25 25-003

Light M8x18 32 2.3 25 41 20-01450 Std M8x20 5 46 2.9 25,20 27 20-05130 Std M8x18 30 15 25 15 20-003 SS M8x16 23.7 7.8 16 8.9 1.9 16 20 14 20-003SS

28 Std M8x18 28 14 25 15 20-003

SS M8x16 20 14 20-003SS20 Std M5x12 3 19 4.8 10 4.5 1.1 10 20 10 4.3 4.5 5 20-021

StandardFastening Set

Technical DataPlate: St, zinc plated orstainless steel (SS)

To make SAE Standard Fastening Set 28 usefastening plate (20-003Z1) and 5/16-18 x 5/8BHCS (25-110-5)

ApplicationProvides power-lock connection andalignment of profiles.20-014 is recommended for use on 40series Light and Closed Slot profiles.

1 Location of access holes for hexagon wrench, number dimension represents centerdimensions of pilot holes.

2 Multiple fastening elements are required for the various profile cross sections.3 Joining and assembly of profiles with the Standard Fastening Set


1

2 3

Description Unit Weight Part #Flat Plate Fastening Set 1 set 13 g 20-028Flat Plate (w/o screw) 1 pc 6 g 20-028Z1

Flat PlateFastening Set

1 Connecting Closed SlotProfiles

2 Using M8x10 BHCS(24-110-8) and Flat Plate(20-028Z1) for connecting28 series profiles

1 2

ApplicationFlat Plate Fastening Set is suitable forconnecting two profiles at 90 whenStandard Fastener can not be used.


Technical DataSt, zinc platedTightening torque: 25 Nm

Add Z1 to part number for a fastening plate without screw (i.e. 20-002Z1)

22


Houston, Tx 7706659



UniversalFastening Set

2 3

4

11-2 90 connection of facing profiles

movable in T-slot3 Step bore dimensions4 Structural applications require one

fastener for each connecting T-slot onboth sides of the profile

5 Univ. Fast. Set 20-011 for attaching 28series profile to 40 series profile

Technical DataZn cast, galvanizedIncludes screw and T-slot Nut, St.

Tightening torque40 & 50 series: 25 Nm30 & 28 series: 14 Nm20 series: 3 Nm

ApplicationFor 90 profile connections and movableconnections. Ideal for retrofit/additionsto existing frames.Fastening set 20-011 used to connect28 series profiles to 40 series profiles.Fastening set 28 20-005: T-slot nut 28must be inserted at end of profile andslid to proper position.

Profile Dimensions (mm) Weight Series A Hex B C D E F (g) Part # 40, 50

M8x30 BHCS 516

33.8 41 20-0045/16-18x1/4 BHCS 3/16 33.8 41 25-004

28 M6x27 SHCS 8 20 31.3 20 30 20-005 28/40 M6x30 SHCS 5 11 33.5 36 20-011 30 M6x27 SHCS 31.3 31 20-008 20 M4x14 SHCS 3 8.5 5 12 17.2 10 7 20-040

Universal Zinc Casting 40 (w/o screw and T-nut) 20-004Z1Universal Zinc Casting 28 (w/o screw and T-nut) 20-005Z1


5





Butt-Fastening Set

3

1-2 Processing of profiles and assembly ofthe connection.

3 The number of fasteners required isdetermined by the size of the profile.

Description Unit Weight Part #Butt-Fastening Set M8 1 set 59 g 20-006Butt-Fastening Set M6 1 set 45 g 20-012


Technical DataZn cast, galvanized20-006 includes M8x45 BHCS20-012 includes M6x50 SHCS and M6hex nutTightening torque: 20-006 = 25 Nm

20-012 = 14 Nm

ApplicationFor end-face fastening (lengthening) ofprofiles. Use M8 Fastener for 40 and 50series profiles. Use M6 fastener for 28and 30 series profiles and pneumaticapplications on 40 series profiles.

1

Description Unit Weight Part #Profile-to-Wall Fastening Set M8 1 set 32 g 20-015Profile-to-Wall Casting (w/o screw,washer) 1 pc 20 g 20-015Z1

Profile-to-WallFastening Set

ApplicationFor connection of 40 series profiles toother parts without T-slots, particularlyCorner Elements and Reversing Units.

Technical DataZn cast, galvanizedIncludes M8x30 BHCS and M8 ribspring washerTightening torque: 25 Nm

20-006

20-012

2

22


Houston, Tx 7706661



1

3

Technical DataSt, zinc plated self-tapping fastenerM6x40 SHCS, M6 T-slot nut 40,black nylon cover.Tightening torque: 14 Nm

Description Unit Weight Part #Self-Tapping Connector 40 1 set 34 g 20-019

ApplicationFor right angle attachment of 40 seriesprofiles. Particularly suitable forretrofitting to existing structures, as noservicing is needed. The self-tappingfastener is inserted into end of any T-slotfrom the end face. Left handed threads.

Self-TappingConnector

1 Slide screw into slot ofprofile

2 Install the self-tappingfastener with 6mm hexagonwrench

3 Insert the T-slot nut andattach the connector with5mm hexagon wrench.Install plastic cover

2

3 41

Parallel Clamp

2

1-2 Installation 3 Profiles at 90 4 Profile at angles

Description Unit Weight Part #Parallel Clamp 40 1 set 37 g 20-017

ApplicationFor parallel clamping 40 series profilesin any angular position. No machining ofprofiles is necessary.

Technical DataSt, stainlessM6x20 FHCS, M6x14 Low sockethead screw, T-slot nut M6Tightening torque: 5.5 Nm





Mitre Connector

Technical DataSt, zinc plated

40 Fastening Set includes two M8Economy T-slot nuts 40 and twoM8x16 Cone point set screws.

28 Fastening Set includes: two M6Economy T-slot nuts 28 and twoM6x12 Cone point set screws.

Mitre Bracket: Al, anodized

Loctite Thread Locker No. 262recommended to secure setscrews

Description Unit Weight Part #Mitre Connector HD w/ 40 Fast. Set 1 set 67 g 20-022Mitre Connector MD w/

Documents

Ips Catalog