iPro - Alllightalllight.hu/uploads/ipro_iguzzini_en.pdf · 512 iPro small / medium / large design Mario Cucinella Features • Direct light luminaire for use with metal halide, sodium

509509

Ecosustainable house in Salento - Salve, ItalyArchitectural and lighting project: Massimo Iosa GhiniPhoto: Cosmo Laera

iPro design Mario Cucinella

small 132micro 51 mini 81

medium 155 large 192

products.iguzzini.com/ipro_line

510

iPro micro / mini design Mario Cucinella

Features

• Direct light luminaire for use with LEDs.

• Installation on the ground, wall, ceiling and garden.

• Die-cast aluminium optical assembly and rear cap; transparent tempered sodium-calcium sealing glass, 4 mm thick, siliconed to optical assembly.

• Versions with front cylinder (for a cleaner light beam) made of methacrylate with black paint finish fixed with silicone to optical assembly.

• All products are provided with lenses or high reflection flux enhancers in thermoplastic material.

• Mini body versions provided with electronic power supply; micro body with electronic power supply to be ordered separately except ground/garden versions with in-ground spike (power supply integrated).

• LED versions available with RGB dynamic colour change compatible with lighting management systems.

• Graduated scale and mechanical aiming lock.

• Luminaire ready for pass-through wiring.

• All external screws are in A2 stainless steel.

• IP66 IP67 buried optical compartment in spike version).

Compact size

Optics and lamps

lumenlm

LED QR CBC 51

360 4,7W 20W 76%

(3000K) LED energy saving compared with conventional lamps

• Single Chip

• Colour stability Mac Adam <3

• Life 100000 h L80 B10

• Color temperature: Neutral white 4000K Warm white 3000K

SS - Superspot a 8°

F - Flood a 26°-32°-34°

L - Light Sliver

VWF - Very Wide Flood a 84°-90°

EL - Longitudinal Elliptical

ET - Transversal Elliptical

Versions

Micro and mini body floodlights areavailable in wall-/ceiling-mountedversions. The codes, technicaland lighting design featuresare on page 672.


M - Medium a 16°-18°

Energy saving

IP66 IK0703

511products.iguzzini.com/code

iPro micro / mini

01 white

15 grey

light source W lm optic code colour

4000K - CRI 80

4,5 W 420 L BJ88 01-15

2,2 W 190 8° * BJ90 01-15

4,7 W 390 18° BJ94 01-15

4,7 W 390 26° BJ98 01-15

2,2 W 190 84° * BK00 01-15

3000K - CRI 80

4,5 W 390 L BJ89 01-15

2,2 W 180 8° * BJ91 01-15

4,7 W 360 18° BJ95 01-15

4,7 W 360 26° BJ99 01-15

2,2 W 180 84° * BK01 01-15

Power supply to be ordered separately to 500mA* Power supply codes max700 mA

(for the a 500mA data refer to the on-line catalogue)

56

5177


4000K - CRI 80

2,2 W 190 8° * BJ92 01-15

4,7 W 390 16° BJ96 01-15

3000K - CRI 80

2,2 W 180 8° * BJ93 01-15

4,7 W 360 16° BJ97 01-15

Power supply to be ordered separately to 500mA* Power supply codes max700 mA

(for the a 500mA data refer to the on-line catalogue)

56

32 5177

80

4000K - CRI 80

4,7 W 390 18° BK14 01-15

4,7 W 390 26° BK16 01-15

3000K - CRI 80

4,7 W 360 18° BK15 01-15

4,7 W 360 26° BK17 01-15

Complete with power supply and pass-through wiringClass of Insulation II

83

50

101

320

90

4000K - CRI 80

4,7 W 400 8° BK18 01-15

4,7 W 400 ET BK20 01-15

4,7 W 400 EL BK22 01-15

4,7 W 400 34° BK24 01-15

4,7 W 400 90° BK26 01-15

3000K - CRI 80

4,7 W 380 8° BK19 01-15

4,7 W 380 ET BK21 01-15

4,7 W 380 EL BK23 01-15

4,7 W 380 34° BK25 01-15

4,7 W 380 90° BK27 01-15

Complete with power supplyClass of Insulation II

RGB

4 W 180 32° BK28 01-15

DALI or DMX-RDM driver group to be ordered separately.

86

81

111

Compatible with light management systemsof the iGuzzini range illustrated on page 693.For the system definition, refer to the instructions.

installation systemsand components

code colour code colour

Spike for groundapplication

--- --- BZ60 00

Electronic powersupply 6 W - IP20

BZ98 00 --- ---

Vin=100-240Vac / 50-60 Hz Vout=12Vdc 500mAdim. 40x42x22h

Electronic powersupply 20 W - IP20

BZA0 00 --- ---

Vin=110-240Vac / 50-60 HzVout=42Vdc 500mAdim. 38x119x28h

Electronic powersupply 17 W - IP20Vin=220-240Vac / 50-60 HzVout=2-25Vdc 700mAdim. 37x128x28h

MXF9 00 --- ---for BJ90-BJ91-BJ92BJ93- BK00-BK01

Box for power supplies IP67dim. 140x230x95h

9582 00 --- ---for BZ98-BZ99-BZA0-MXF9

Box for power supplies IP67dim. 280x190x130h

--- --- BZ33 00for 9586-X001

56

5177

56

5177

86

81

111

8681

111

code colour code colour

Connector block withfast-coupling terminals - IP66Suitable for cables 2x4 mm2

BZK7 15 --- ---

Watertight connector kit IP68

9581 04 9581 04for monochromatic LED

Connector IP68Suitable for cables 2x2,5 mm2

BZK6 00 --- ---

Driver Group - Class II220-240VacComposed of DALI 350mAcontrol interface and 30 W28Vdc electronic powersupply.Occupies 3 DALI addresses.

--- --- 9856 00for connecting max. 2luminaires BK28

Driver Group - Class II220-240VacComposed of DMX-RDMcontrol interface and 30 W28Vdc electronic powersupply.

--- --- X001 00for connecting max. 2luminaires BK28

Technical data may change with technological evolution.For updated data please refer to our on-line catalogue.

512

iPro small / medium / largedesign Mario Cucinella

Features

• Direct light luminaire for use with metal halide, sodium vapour, halogen lamps and LEDs.

• Installation on wall with bracket, surface and floor.• Optical assembly and front frame

made of die-cast material; hardened transparent sodiumcalcium safety glass, 5 mm thick, siliconed to frame.

• Bracket made of extruded aluminium with silk-screened graduated scale for easier aiming operations.

• Internal silicone gaskets to guarantee water tightness.

• Circular and asymmetrical longitudinal reflectors made of 99.93% superpure aluminium subjected to anodic oxidation process and polishing.

• Asymmetrical transversal reflector made of 99.85% superpure aluminium subjected to anodic oxidation process.

• LED C.o.B. versions with Opti Beam high-efficiency reflector.

• Monochromatic LED version with 9/16/25-LED circuit, optics with plastic lenses, glass with customised serigraphy, and 100-265Vac 50/60Hz built-in electronic power supply.

• LED RGB and Tunable white versions complete with power supply and DMX512-RDM electronic control card.

• High level of light output.• Graduated scale and

mechanical aiming lock.• Luminaire ready for

pass-through wiring.• Class II luminaire, set up for class I.• All external screws are

in A2 stainless steel.

Removable plateRelamping without removing theaccessories

Retention cablefor frame


The directional flap can be fittedindividually or with others

(max. 4) depending on lightingdesign requirements

Redfilter05

Refractorfor ellipticaldistribution

Accessoryframe

Cylindricalscreen

Lamellarlouvre

Glassdiffuser

Protectiongrid

VisorSpill-Ring

Prismaticglass diffuser

Yellowfilter06

Interchangeablereflectors

The accessories allow for changing the features of the light produced by each luminaire to obtain highly professional lighting effects.

The combination of filters allows thelamp color features to be changed,to make the most of the objects litor the space.

Accessoryframe

Cylindricalscreen

Lamellarlouvre

Protectiongrid

VisorSpill-RingSpill-Ring

Yellowfilter

03 IP66 IK07

513

Spill-ringThree types of anti-glare spill-ringsfor maximum visual comfort.

Visual comfort

The iPro system boasts a vast rangeof accessories for guaranteeingextremely flexible, effective lighting,providing the best solution for visualcomfort, avoiding unwanted glareand reducing light pollution.

Visor Directional flaps Louvre

iPro small / medium / large


Cut off Cut-off angle comparisonbetween LED Single Chipand LED C.o.B. versions

LED Single Chip

LED C.o.B.

The screening angles data relate to luminaires with Superspot (SS) opticsand Spot (S) optics. For data relating to Flood (F), Asymmetrical longitudinal (AL)and Asymmetrical Transversal (AT) optics, consult: http://products.iguzzini.com

Spill-ring Cut Off Body a

small 60°

medium 60°

large 45°

no spill-ring

small 30°

medium 40°

large 30°

∝ ∝∝ ∝

∝ ∝∝ ∝

Cut Off Body a

small 30°

medium 30°

large 30°

small 50°

medium 55°

large 56°

∝ ∝∝ ∝

∝ ∝∝ ∝

514


lumenlm

LED QR CBC 51

1550 12W 75W 84%

2000 17W 2x50W 83%

3150 24W 3x50W 84%

(3000K) LED energy saving compared with conventional lamps

• LED C.o.B.

• Colour stability Mac Adam <3

• Life 50000 h L80 B10

• Color temperature: Neutral white 4000K Warm white 3000K Tunable white 2700K÷6000K

* Elliptical optic is obtained by installing the respective accessories.

E - Elliptical*

Optics and lamps

S - Spot a 10°-12°-14°

SS - Superspot a 6°-8°

M - Medium a 16°-20°

F - Flood a 31°-32°-34°-38°

AT - Asymmetrical transversal

AL - Longitudinal transversal

WF - Wide Flood a 48° a 52°

Energy saving

iPro system

The large floodlight can be polemounted (Multipro systemon page 449) and wall-mountedusing the special accessory.

wall-mounted

wall support

pole with arm pole with flange

ceiling-mounted


9,3 - 12 - 16W

17 - 24 - 27 - 35W

24 W

26 W

QR-CBC 51 50W

HIT-CE 20W

HIT-CE 70 - 150W

HIT-TC-CE 35W

HIT-DE-CE 70 - 150W

HST-DE 150W



01 white

15 grey

wall support


4000K - CRI 80 - C.o.B.

12 W 1600 20° BX02 01-15

12 W 1600 40° BX04 01-15

12 W 1600 52° BX06 01-15

3000K - CRI 80 - C.o.B.

12 W 1550 20° BX03 01-15

12 W 1550 40° BX05 01-15

12 W 1550 52° BX07 01-15

Complete with power supply

4000K - CRI 80 - Single Chip

9,3 W 900 10° BD34 01-15

9,3 W 900 34° BD36 01-15


9,3 W 850 10° BD35 01-15

9,3 W 850 34° BD37 01-15


QR CBC 51(GU5,3)

Electronic

50 W 12 V BD38 01-15

Suitable for Energy Saver lamp(Osram Decostar 51 ES and Philips MASTERline ES)

HIT-CE(PGJ5)

Electronic

20 W 6° BD32 01-15

20 W 38° BD33 01-15

140

132

170

140

132

170


16 W 1500 12° BD46 01-15

16 W 1500 32° BD48 01-15

3000K - CRI 80 - Single chip

16 W 1400 12° BD47 01-15

16 W 1400 32° BD49 01-15


HIT-TC-CE(G8,5)

Electronic

35 W 6° BD40 01-15

35 W 10° BD41 01-15

35 W 20° BD42 01-15

35 W AL * BD43 01-15

* Do not use with CMH-GE lamps

4000K - CRI 80 - C.o.B. dimmable 1-10V

17 W 2100 12° BX08 01-15

17 W 2250 38° BX10 01-15

17 W 2250 48° BX12 01-15


17 W 2000 12° BX09 01-15

17 W 2150 38° BX11 01-15

17 W 2150 48° BX13 01-15


165

155

198

165

155

198



24 W 3300 16° BX14 01-15

24 W 3300 32° BX16 01-15

24 W 3300 48° BX18 01-15


24 W 3150 16° BX15 01-15

24 W 3150 32° BX17 01-15

24 W 3150 48° BX19 01-15

4000K - CRI 80 - C.o.B. DALI / Push Dim

35 W 4700 16° BX20 01-15

35 W 4700 32° BX22 01-15

35 W 4700 48° BX24 01-15

3000K - CRI 80 - C.o.B. DALI / Push Dim

35 W 4500 16° BX21 01-15

35 W 4500 32° BX23 01-15

35 W 4500 48° BX25 01-15

Complete with power supply. DALI versions occupy 1 address.


27 W 2430 8° BG35 01-15

27 W 2430 34° BG37 01-15


27 W 2280 8° BG36 01-15

27 W 2280 34° BG38 01-15


RGB Single Chip - DMX512-RDM

24 W 1350 14° BV60 01-15

24 W 1350 32° BV61 01-15

Tunable white Single Chip - DMX512-RDM

26W 2300 10° BV62 01-15

26 W 2300 31° BV63 01-15

Complete with power supply and electronic DMX512-RDM control card. DMX specifications require the insertion of a 120 Ohm terminating resistor (code BZQ7) to be placed between the DATA+ and DATA- cables of the last product in the line.

HIT-CE(G12)

Electromagnetic

150 W 8° BD59 01-15

150 W 36° * BD61 01-15

Class of Insulation I* The Flood optic becomes Medium

with HCI-T Powerball (Osram).

Electronic

70 W 6° BD52 01-15

70 W 10° BD53 01-15

70 W 38° * BD54 01-15

70 W AL BD56 01-15

* The Flood optic becomes Medium with HCI-T Powerball (Osram).

HIT-DE-CE(Rx7s)

HST-DE(Rx7s)

Electromagnetic

150 W

AT BD62 01-15

Class of Insulation I

HIT-DE-CE(Rx7s)

Electronic

70 W AT BD55 01-15

To be used exclusively with light sources with ceramic burner.

200

192

244

200

192

244

Compatible with light management systemsof the iGuzzini range illustrated on page 693.For the system definition, refer to the instructions.

Technical data may change with technological evolution.For updated data please refer to our on-line catalogue.

516 products.iguzzini.com/code


code colour code colour code colour

Accessory-frameFor use installing accessories

BZ49 01-15 BZ63 01-15 BZ77 01-15

Refractor for ellipticaldistribution

BZ53 24 BZ67 24 BZ80 24

Glass diffuser BZ51 65 BZ65 65 BZ79 65

Prismatic glass diffuser BZ52 24 BZ66 24 1154 24for LED version for LED version for LED version

Coloured filters BZ50 05-06 --- --- --- ---

Cylindrical screen*Installed with accessory-frame

BZ57 47-74 BZ72 47-74 BZ86 47-74for BD32-BD38-BX02-BX03 for BD40-BD41-BX08-BX09 for BD52-BD53-BD59

BX14-BX15-BX20-BX21

Visor BZ59 04 BZ74 04 BZ88 04

Single directional flapInstalled with accessory-frame

BZ58 04 BZ73 04 BZ87 04

Protection gridInstalled with accessory-frame

BZ56 13 BZ71 13 BZ85 13

Lamellar louvrefor AsymmetricalLongitudinal optic

--- --- BZ75 04 BZ90 04for BD43 for BD56

Lamellar louvrefor AsymmetricalTransversal optic

--- --- --- --- BZ89 04for BD55-BD62

Spill ring for opticSuperspot and Spot

BZ54 04 BZ68 04 6879 04for BD32 for BD40-BD41 for BD52-BD53-BD59

Spill ring for opticMedium and Flood

BZ55 04 BZ69 04 6881 04for BD33 for BD42 for BD54-BD61

Spill ring for AsymmetricalTransversal optic

--- --- --- --- BZ84 04for BD55-BD62

Interchanging reflectorsfor LED C.o.B.spot X099 (15°) 12 --- --- X105 (16°) 12

flood X100 (42°) 12 X103 (38°) 12 X106 (30°) 12no for BX08-BX09

wide flood X101 (60°) 12 X104 (48°) 12 X107 (48°) 12no for BX08-BX09

accessories

140

132

170

165

155

198

200

192

244

* For LED C.o.B. versions it must be used in association with the diffusing prismatic glass

Refer to the table and to the instruction sheet for information on installation and combination of accessories.



code colour code colour code colour

L-shaped bracketFor installation on cornices

BZ62 15 BZ76 15 BZ91 15

Wall-mounted base BZI8 01-15 BZI9 01-15 BZM5 01-15

Spike for groundapplication

BZ60 00 --- --- --- ---

Strap for attachingto branchesSection=40÷120 mm

BZ61 00 --- --- --- ---

Multiple supportfor two floodlights

--- --- --- --- 6014 15

Multiple supportfor three floodlights

--- --- --- --- 6015 15

installation systems

140

132

170

165

155

198

200

192

244

luminaire power opticcoloured filter glass diffuser/refractor prismatic glass diffuser spill ring spill ring +

coloured filter

coloured filter +glass diffuser/

refractor

coloured filter +prismatic glass

diffuser

coloured filter +cylindrical

screen

coloured filter +no. directional

flaps

insidethe body

on accessoryframe

insidethe body

on accessoryframe

insidethe body

on accessoryframe

insidethe body

coloured filter onaccessory-frame

on accessoryframe

on accessoryframe

on accessoryframe

on accessoryframe

140

132

170

12 W LED Chip on Board 15°/42°/60°

10 W LED Single Chip 6°/32°

50 W QR CBC 51 - for Spot

20 W HIT-CE 6°/38° for 6°165

155

198

17 W LED Chip on Board 12°/38°/48°


35 W HIT-TC-CE 6°/10°/20°/AL for 6°/10°

200

192

244

24/35W LED Chip on Board 16°/30°/48°


70 W HIT-CE6°/10°/38° for 6°/10°

AL

70 W HIT-DE-CE AT

150 W HIT-CE8° *

36° *

150 W HIT-DE-CE HST-DE AT

* To be used exclusively with light sources with ceramic burner

Refer to the table and to the instruction sheet for information on installation and combination of accessories.

Installation permitted Installation not permitted

Documents

iPro - Alllightalllight.hu/uploads/ipro_iguzzini_en.pdf · 512 iPro small / medium / large design Mario Cucinella Features • Direct light luminaire for use with metal halide, sodium