Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
IPrime
Annual Meeting May 28 – 30, 2013 University of Minnesota, Minneapolis
East Bank Campus
Schedule & Events
Program Reviews
Board & Committee Meetings
Special Topic Workshops
2 Poster Sessions
Faculty-Industry Meet & Greet
EBOOK
http://goo.gl/R0qin
Welcome! I would like to thank you for attending the IPrime 2013 Annual Meeting at the University of Minnesota. IPrime is the Industrial Partnership for Research in Interfacial and Materials Engineering, and is the largest industrial consortium in the University. It connects industrial companies to selected research programs in the College of Science and Engineering, to the NSF-supported Materials Research Science and Engineering Center (MRSEC), the College of Food, Agriculture and Natural Resource Sciences, and the Academic Health Center. IPrime currently includes over 54 faculty and associated graduate students from 10 departments working in 8 research programs, with support from a record 50+ member companies. The IPrime Annual Meeting is an ideal opportunity to network with other member companies, to learn about latest research results, and to meet with more than 150 dedicated young engineers and scientists. This year, IPrime researchers will be sharing exciting new discoveries in areas such as biotechnology, biomaterials and pharmaceutical materials, magnetic heterostructures, organic semi-conductors, polymers, coatings, and renewable energy materials. In addition there are six exciting workshops and special Characterization Facility demonstrations. Enclosed is the schedule for our 2013 Annual Meeting and maps of meeting room locations. Complete information, including abstracts, is available on our website, www.iprime.umn.edu. Following the Annual Meeting, many of the presentations and posters will be available on our website (access with your company password). We welcome your feedback through your company’s TAC, Technical Advisory Committee Representative(s). Again, thank you for your membership in IPrime and for participating in the 2013 IPrime Annual Meeting. Sincerely,
Chris Macosko Director, IPRIME
Industrial Partnership for Research in
Interfacial and Materials Engineering
An entry for industrial connections to University of Minnesota research through 54 faculty. IPRIME research is pre-competitive, non-proprietary and focuses on two-way knowledge transfer within eight research partnership programs.
Biocatalysis and Biotechnology
Biomaterials and Pharmaceutical Materials
Coating Process Fundamentals
Magnetic Heterostructures
Microstructured Polymers
Nanostructural Materials and Processes
Organic Optoelectronic Interfaces
Renewable Energy Materials
Partnership Scientific Exchange with the Academic Sector Influence Research Directions Leverage Government Funding Industrial Fellows Program Industry Source of Research Topics
Future Employees Early Access to Ph.D. Students and
their Research
Facilities Characterization Facility* Polymer Synthesis Lab* University Imaging Centers* Coating Process and Visualization Lab Polymer Characterization—Rheology Tissue Mechanics Lab
Technology Transfer Annual Meetings Short Courses Industrial Fellows Program Workshops throughout the Year Online Resources: Webcasts ++
IPRIME MEMBERSHIP BENEFITS
www.iprime.umn.edu
PARTNERSHIP PROGRAMS
* Member Discount
3M Agilent Technologies Asahi Kasei Ashland Chemical BASF Bergquist Boston Scientific Bruker Cabot CooperVision Corning, Inc. Dai Nippon Printing Donaldson Company Dow Chemical Dow Corning DuPont EarthClean Eastman Chemical Ecolab Evonik ExxonMobil General Mills H.B.Fuller Hearing Components Henkel Hershey’s
Member Companies
Ikonics Infineum INOAC Interfacial Solutions Lord Corporation Medtronic Nanocopoeia NewPage NIST Nitto Denko Optomec Physical Electronics RTP Company SABIC Sage Electrochromics Sandia Livermore Schlumberger Segetis Stratasys SVT Associates TA Instruments Toray Total Toyota Upsher-Smith Valspar
Industrial Partnership for Research in
Interfacial and Materials Engineering
www.iprime.umn.edu
IPRIME ANNUAL MEETING 2013
TABLE OF CONTENTS
TABLE OF CONTENTS p. 1 SPECIAL EVENTS, TAC AND PPB MEETINGS p. 2 WORKSHOPS p. 3 - 14 PROGRAM REVIEWS p. 15 - 31 POSTER SESSIONS p. 32- 50 ORAL PRESENTATIONS BY DATE & TIME p. 51 - 62 INDUSTRIAL FELLOWS p. 63 - 64
BUILDING INFORMATION / CAMPUS MAP INSIDE BACK COVER
See events for room numbers
Building Events
COFFMAN MEMORIAL UNION PPB BOARD MEETING
COMMONS HOTEL PPB BREAKFAST MEETIN G
KELLER HALL WORKSHOPS + PROGRAMS, EXCEPT NMP
MCNAMARA ALUMNI C TR PLENARY, MEET/GREET, POSTER SESSIONS
MECHANICAL ENGINEERI NG NMP WORKSHOP AND PROGRAM REVIEWS
SHEPHERD LABS, RM 12 CHARACTERIZATION FACI LITY DEMOS
Industrial Partnership for Research in Interfacial and Materials Engineering 2013 Annual Meeting
- 2 -
IPRIME ANNUAL MEETING 2013
SPECIAL EVENTS, TAC AND PPB MEETINGS
SPECIAL EVENTS BY DATE
POSTER SESSION 1 (ALL POSTERS DISPLAY ED BOTH NIGHTS – 5/28-29)
(Tue, May 28) 5:45-7:00 PM, McNamara Alumni Center, Memorial Hall
PLENARY LUNCHEON
(Wed, May 29) 11:45 AM-1:00 PM, McNamara Alumni Center, Johnson Great Room
FACULTY- INDUSTRY MEET & GREET ( IPRIME FACULTY/ INDUSTRY ONLY)
(Wed, May 29) 5:00-5:45 PM, McNamara Alumni Center, Johnson Great Room
POSTER SESSION 2 (ALL POSTERS DISPLAY ED BOTH NIGHTS – 5/28-29)
(Wed, May 29) 5:45-7:30PM, McNamara Alumni Center, Memorial Hall
CHARACTERIZATION FACILITY DEMOS
Characterization Facility Demos on Coatings and Polymer Nanocomposites
(Wed, May 29) 7:00-8:30 PM, 12 Shepherd Labs
TAC: TECHNICAL ADVISORY COMMITTEE LUNCHEON MEETINGS ( IPRIME -DESIGNATED TAC MEMBE RS ONLY)
(Thu, May 30) 12:00-1:45 PM, Coffman Memorial Union, 4rd Floor, Campus Club
BB TAC Room 409 MP TAC Dale Shepherd Room BPM TAC Room 411 NMP TAC Room A CPF TAC Room B/C REM TAC cancelled (contact Uwe Kortshagen for details)
PPB: PLANNING AND POLICY BOARD MEETINGS
( IPRIME -DESIGNATED PPB MEMBE RS ONLY)
PLANNING AND POLICY BOARD BREAKFAST (Thu, May 30) 7:00-8:15 AM, Commons Hotel (formerly Radisson), Think 5 Room
PLANNING AND POLICY BOARD MEETING
(Thu, May 30) 2:00-3:30 PM, Coffman Memorial Union, 3rd Floor, President’s Room
Industrial Partnership for Research in Interfacial and Materials Engineering 2013 Annual Meeting
- 3 -
IPRIME WORKSHOPS in alphabetical order by IPrime Program
Workshop Abstracts p. 5-6
Protein Stability and Biocatalysis (BB) p. 7
Antimicrobial and Antifouling Surfaces and Materials (BPM) p. 8
Perspectives on Coating Process Fundamentals I & II (CPF) p. 9–10
Carbon Polymer Nanocomposites I & II (MP) p. 11–12
Self-Assembly, Colloids and Surfaces in Industry (NMP) p. 13
Materials, Architectures and Processes for Organic p. 14
Light-Emitting Devices (OEI)
Industrial Partnership for Research in Interfacial and Materials Engineering 2013 Annual Meeting
- 4 -
NOTES
Industrial Partnership for Research in Interfacial and Materials Engineering 2013 Annual Meeting
- 5 -
IPRIME WORKSHOP & DEMO ABSTRACTS
Protein Stability and Biocatalysis (BB) May 29, 1:15-5:00p, Coordinator: Ping Wang (Program Leader) Stability of biocatalysts is concerned for most industrial applications which challenge the catalysts with harsh environments that are very different from their biological origins. Engineering more stable protein structures and after-isolation fabrications are effective means in deriving stable enzymes for extended life and consistent performance. Most protein engineering strategies alter the equilibrium between folded and denatured forms by either stabilizing the folded form or destabilizing the unfolded form, while after-isolation stabilization emphasizes manipulation of the microenvironments surrounding enzyme molecules. This workshop will review limiting factors of protein stability and emerging technologies for highly stable biocatalysts.
__________________________________________________________________
Antimicrobial and Antifouling Surfaces and Materials (BPM)
May 29, 8:30-11:40a, Coordinator: Chun Wang Biomaterials surfaces are often plagued by adhesion of microbes such as bacteria, which can lead to serious and often times fatal infections. It remains a significant challenge to develop surface coatings for medical implants and devices that are resistant to bacterial adhesion and biofilm formation, or are toxic to bacterial cells without harming human cells. On the other hand, nonspecific protein adsorption onto biomaterial surfaces not only aggravates bacterial adhesion and colonization ("biofouling"), but it also may lead to poor biocompatibility in vivo and compromise normal functioning of medical devices. In this workshop academic and industry experts will introduce state-of-the-art approaches, materials, and surfaces with antimicrobial and antifouling properties. They will also discuss how these technologies can improve the performance and biocompatibility of implants and devices.
__________________________________________________________________
Perspectives on Coating Process Fundamentals 1 & 2 (CPF)
May 28, 1:30-5:20p & May 29, 8:30-11:40a, Coordinator: Satish Kumar (Program Co-Leader)
This workshop will be the 25th in the history the Coating Process Fundamentals Program. To commemorate this occasion, we are planning a special two-part workshop.
Tuesday afternoon will be a "working shop" where companies bring in short vignettes of interesting problems they have. This format has been used successfully in past workshops, & the problems that companies discuss often significantly influence CPFP research.
Wednesday morning will be devoted to talks providing a look backward and at what lies ahead regarding several key areas in coating processes fundamentals. Perspectives will be given on areas such as computation, solidification, visualization, and industrial-academic interactions.
Industrial Partnership for Research in Interfacial and Materials Engineering 2013 Annual Meeting
- 6 -
IPRIME WORKSHOP & DEMO ABSTRACTS CONT’D
Carbon Polymer Nanocomposites 1 & 2 (MP) May 28, 1:30-5:20p & May 29, 8:30-11:40a, Coordinator: David Morse
The workshop will focus on composite materials containing carbon nanotubes and graphite or graphene sheets. Carbon polymer nanocomposites offer some unique advantages, but also pose unique challenges because of the difficulty of dispersing some of these materials. The workshop will discuss a variety of methods for dispersing and processing nanotube and graphene composites, structure characterization, and relationship of structure to final mechanical, transport, and electrical properties.
__________________________________________________________________
Self-Assembly, Colloids and Surfaces in Industry (NMP) May 28, 1:30-5:20p, Coordinators: Alon McCormick (Program Leader) and Joe Zasadzinski
We have invited panelists who are select alumni and allies of the program (former graduate students, postdocs and industrial fellows) currently in industry to provide overviews of self-assembly, surface, colloid and nanostructure issues important to their professional practice. This collection of short overview talks will provide technical insights, vistas and challenges, and also some retrospection on the transitions from academia to the industrial research and development environment. __________________________________________________________________
Materials, Architectures & Processes for Organic Light-Emitting Devices (OEI) May 29, 8:30-11:40a, Coordinator: Russ Holmes
Organic semiconductors continue to receive significant attention for application in next generation electronic and optoelectronic devices. These materials are attractive for their high performance and compatibility with large-area, high-throughput processing techniques. While organic light-emitting devices (OLEDs) are the most mature technology based on organic semiconductors, there remain significant fundamental and technological challenges that need to be addressed before these materials can truly realize broad application in displays and solid-state lighting. This workshop will discuss key challenges related to materials and device design and performance, and also address the characterization and processing techniques relevant to this area. __________________________________________________________________
Characterization Facility Demos on Coatings and Polymer Nanocomposites May 29, 7:00-8:30p, Coordinator: Greg Haugstad
Demonstrations will include cross-sectional SEM, nanomechanically sensitive AFM, and confocal Raman microscopy, applied to polymeric-nanocomposite coatings where the disperse inclusions are nanoscale organic particulates (e.g., drug), inorganic nanoparticles (e.g., silica), or nanoscale domains of phase-segregated polymers.
Industrial Partnership for Research in Interfacial and Materials Engineering 2013 Annual Meeting
- 7 -
Wed, May 29, 1:15 – 5:00 PM Keller Hall, room 3-115
Protein Stability and Biocatalysis Workshop
Biocatalysis and Biotechnology Program [BB]
Ping Wang, Coordinator and Program Leader
Time Title Author
1:15 PM Opening Remarks Ping Wang, UMN
1:20 PM Forces Stabilizing Proteins Nick Pace, TX A&M Univ
2:10 PM Computational Design of Protein Stability: Stabilized to Order
George Makhatadze, RPI
3:00 PM BREAK
3:30 PM Spatial Confinement for Enzyme Stabilization for Industrial Biotechnologies
Ping Wang, UMN
4:20 PM Engineering More Stable Enzymes Romas Kazlauskas, UMN
Industrial Partnership for Research in Interfacial and Materials Engineering 2013 Annual Meeting
- 8 -
Wed, May 29, 8:25-11:40 AM Keller Hall, room 3-125
Antimicrobial and Antifouling Surfaces and Materials Workshop
Biomaterials and Pharmaceutical Materials Program [BPM]
Chun Wang, Coordinator and IPrime Faculty
Time Title Author
8:25 AM Welcome and Introduction Chun Wang, UMN
8:30 AM Orthopedic Implant Coatings: The Leap From Bench-Side to In Vivo
Thomas P. Schaer, U of PA
9:15 AM Designing Polymers with Protein-like Activity: Novel Antimicrobial Peptide Mimics
Gregory N. Tew, U of MA
10:00 AM BREAK
10:30 AM Molecular Understanding, Design and Development of Ultra Low Fouling Zwitterionic-based Functional Materials
Shaoyi Jiang, U of WA
11:15 AM Panel Discussion, Conclusion Chun Wang, UMN
Industrial Partnership for Research in Interfacial and Materials Engineering 2013 Annual Meeting
- 9 -
Tue, May 28, 1:30-5:20 PM Keller Hall, room 3-180
Perspectives on Coating Process Fundamentals Workshop I
Coating Process Fundamentals Program [CPF]
Satish Kumar, Coordinator
Time Title Authors
1:30 PM Use of Tailor Made Amorphous Silica Technology to Enhance Coatings
Maria Nargiello, Evonik
2:15 PM Computational Analysis of Coating Processes Marcio Carvalho, PUC-Rio
3:00 PM BREAK
3:20 PM Treatment and Preparation of Angioplasty Balloons for AFM Material Analysis
Bruce Forsyth, Boston Sci Jacob Warner, UMN Greg Haugstad, UMN Fang Zhou, UMN
3:45 PM High Speed Imaging to Characterize Spray Profiles of Waterborne Latex Coatings
Keith Kirkwood, Valspar*
4:10 PM Academia & Industry Successful Partnership in Precision Coating Technology
Shuzo Fuchigami, UMN
*IPrime Industrial Fellow
Industrial Partnership for Research in Interfacial and Materials Engineering 2013 Annual Meeting
- 10 -
Wed, May 29, 9:00-11:40 AM
Keller Hall, room 3-180
Perspectives on Coating Process Fundamentals Workshop Session II
Coating Process Fundamentals Program [CPF]
Satish Kumar, Coordinator and Co-Program Leader
Time Title Authors
9:00 AM Perspectives on Solidification and Stress Development in Coatings
Lorraine Francis, UMN
9:45 AM Hershey Coating Applications and Related Interests Julie Hickey, Hersheys
10:10 AM BREAK
10:30 AM Ultra-Thin Coating with Tensioned-Web Method and Thickness Fluctuation Analysis by Real-Time Thickness Measurement Method and Numerical Model
Toshihide Horii,
Panasonic*
Marcio Carvalho, PUC-Rio Satish Kumar, UMN
11:00 AM Perspectives on Visualization of Coating Processes Wieslaw Suszynski, UMN
*IPrime Industrial Fellow
Industrial Partnership for Research in Interfacial and Materials Engineering 2013 Annual Meeting
- 11 -
Tue, May 28, 1:30-5:20 PM Keller Hall, room 3-210
Carbon Polymer Nanocomposites Workshop Session I
Microstructured Polymers Program [MP]
David Morse, Coordinator
Time Title Authors
1:30 PM What Prevents Polymer Graphene Nanocomposites From Reaching Their Theoretical Properties?
Chris Macosko, UMN
2:20 PM Developments in Polymer/Carbon Nanotube Composite Films and Fibers
Satish Kumar, GA Tech Univ
3:10 PM BREAK
3:30 PM Carbon Nanotube and Graphene: From Fluid Phases to Multifunctional Materials
Matteo Pasquali, Rice Univ
4:20 PM Graphene Oxide: Some New Insights Into an Old Material
Jiaxing Huang, Northwestern Univ
Industrial Partnership for Research in Interfacial and Materials Engineering 2013 Annual Meeting
- 12 -
Wed, May 29, 8:30-11:40 AM
Keller Hall, room 3-210
Carbon Polymer Nanocomposites Workshop Session ll
Microstructured Polymers Program [MP]
David Morse, Coordinator
Time Title Authors
8:30 AM Thin Composite Coatings of Purified Single-Wall Carbon Nanotubes: Applications and Durability
Erik Hobbie, N.D. State U
9:20 AM Engineering Carbon Additives for Functionality in Polymer Composites: From Carbon Block to Graphenes
Angelos Kyrlidis, Cabot Corp
9:45 AM BREAK
10:15 AM Toughening of Thermosets with Low Levels of Graphene
Yong Tae Park, UMN Yuqiang Qian, UMN Andreas Stein, UMN Chris Macosko, UMN
10:40 AM High Voltage and Shielding Applications for Carbon Nanotube Composites
Sam Dahman, RTP Co
11:05 AM Picosecond Heating of Free-Standing and Substrate-Supported CarbonNanotubes Studied with Ultrafast Electron Microscopy
David Flannigan, UMN
Industrial Partnership for Research in Interfacial and Materials Engineering 2013 Annual Meeting
- 13 -
Tue, May 28, 1:30-5:00 PM Mechanical Engineering, room 18
\Self-Assembly, Colloids and Surfaces in Industry Workshop
Nanostructural Materials and Processes Program [NMP]
Alon McCormick (Program Leader) and Joseph Zasadzinski , Coordinators
We have invited panelists who are select alumni and allies of the program (former graduate students, postdocs and industrial fellows) currently in industry to provide overviews of self-assembly, surface, colloid and nanostructure issues important to their professional practice. This collection of short overview talks will provide technical insights, vistas and challenges, and also some retrospection on the transitions from academia to the industrial research and development environment.
Tentative Panelists
Alumni:
Francois Ahimou (Haugstad group alum)
Infection Prevention Division
3M
Dave Burleson (Gladfelter and Penn group alum)
Analytical Services
Ecolab
Jason Heffelfinger (Carter group alum, Minnesota Microscopy Soc Exec Board)
Medtronic
Patti Sanft (Francis/Davidson group alum, Minnesota Microscopy Soc Exec Board)
Analytical Department
H.B. Fuller Company
Scott Walker (Zasadzinski group alum, and IPrime collaborator)
Electronics Markets Materials Division
3M
Veterans of industry/academia collaboration in colloids and nanostructures
Jinping Dong Cargill
Mike Tupy Engineering R&D Cargill
David Whitcomb or Eric Granstrom Carestream Health
Industrial Partnership for Research in Interfacial and Materials Engineering 2013 Annual Meeting
- 14 -
Wed, May 29, 8:30-11:40 AM Keller Hall, room 3-111
Materials, Architectures and Processes for Organic Light-Emitting Devices
Organic Optoelectronic Interfaces Program Workshop [OEI]
Russ Holmes, Coordinator
Time Title Authors
8:30 AM Tandem White OLED Devices Combining Fluorescent and Phosphorescent Emitters for Lighting
Marina Kondakova, OLEDWorks
9:10 AM OLED Light Extraction Film Stan Lee, 3M
9:50 AM BREAK
10:20 AM Depth Profiling of OLED Materials by Cluster Ion Beams
John Hammond, Physical Electronics
11:00 AM Development of Mass Production Thermal Evaporation Process Equipment For Organic Light-Emitting Devices (OLEDs)
Wade Luhman, Veeco Instruments
Industrial Partnership for Research in Interfacial and Materials Engineering 2013 Annual Meeting
- 15 -
PROGRAM REVIEWS in alphabetical order by IPrime Program
IPrime Program Descriptions p. 17
Biocatalysis and Biotechnology p. 18
Biomaterials and Pharmaceutical Materials p. 19
Coating Process Fundamentals I & II p. 20-21
Magnetic Heterostructures p. 22
Microstructured Polymers I & II p. 23-24
Nanostructural Materials and Processes I & II p. 25-27
Organic Optoelectronic Interfaces p. 28-29
Renewable Energy Materials p. 30-31
Industrial Partnership for Research in Interfacial and Materials Engineering 2013 Annual Meeting
- 16 -
NOTES
Industrial Partnership for Research in Interfacial and Materials Engineering 2013 Annual Meeting
- 17 -
IPRIME PARTNERSHIP PROGRAMS (8)
Biocatalysis and Biotechnology (BB) Enzymatic synthesis for biofuels, biopolymers, biosensors, biofuel cells, and specialty chemicals.
Enzymes to produce chemicals for end use and as synthons; biotechnological applications of enzymes for
use in biofuels production and chemical synthesis; metabolic and pathway engineering for synthesis of
bioactive compounds; microbial synthesis of biodegradable polymers; functional genomics for enzyme
discovery; biocatalysis in nanoscale environments; Nanotechnology for micro bioreactors, membrane and
interfacial catalysis, bioactive materials, and coatings.
Biomaterials and Pharmaceutical Materials (BPM)
Synthesis and characterization of novel hard and soft materials and composites for biomedical and
pharmaceutical applications; dynamics of mechanical, chemical and transport properties of biomaterials;
evaluation and elucidation of materials interactions with biological tissues and media, and with
pharmaceuticals.
Coating Process Fundamentals (CPF) Process and prototype visualizations, microscopies, nanotesting, NMR and other spectroscopies, and
microstructure probes combined with theory, computational methods, and computers to support the
electronics, photonics, magnetics, specialty-films, and many other industries.
Magnetic Heterostructures (MH)
Experiments and theory for advancing the understanding of magnetism and spin transport at interfaces-
phenomena critical to new sensor and digital technologies.
Microstructured Polymers (MP)
Design and synthesis of novel polymers, characterization of their structural and mechanical properties,
and investigation of their rheological and processing behavior for both commodity and high value-added
polymer products.
Nanostructural Materials and Processes (NMP)
Identifying key molecular parameters and principles governing the assembly and properties of molecular
thin films, surfactants, and ordered molecular phases of molecular systems for synthesis of specialty
materials in agricultural, cosmetics, pharmaceuticals, and other businesses.
Organic Optoelectronic Interfaces (OEI)
Define structure-mobility relationships and to maximize electron and hole mobilities for applications in
field effect transistors (FETs) as model devices.
Renewable Energy Materials (REM)
Sustainable generation, conversion, storage, and utilization of energy using abundant and nontoxic
materials are among the most significant challenges we face in the 21st century.
Industrial Partnership for Research in Interfacial and Materials Engineering 2013 Annual Meeting
- 18 -
Thu, May 30, 8:20-11:40 AM Keller Hall, room 3-115
Biocatalysis and Biotechnology Program Review
Ping Wang, Program Leader
Time Title Authors
8:20 AM Introduction Ping Wang, UMN
8:30 AM New Applications for Enzymes Larry Wackett, UMN
9:00 AM Use of Metagenomic Approaches to Understand and Capitalize on Microbial Diversity
Michael Sadowsky, UMN
9:30 AM Enzymatic Protein Labeling Using Prenyltransferases Jonathan Dozier, UMN Mark Distefano, UMN
10:00 AM BREAK
10:30 AM Thin-Film Enzyme Technologies for Bioanalysis Ping Wang, UMN
11:00 AM Biosynthetic Innovations for Sustainable Polymers Mingyong Xiong, UMN Kechun Zhang, UMN
11:30 AM PGenetic Improvement of Yeast strains for Cellulosic Ethanol Production
Pedro Pena, UMN Steven Glasker, UMN John Hundertmark, UMN Jared Cohen, UMN Friedrich Srienc, UMN
Industrial Partnership for Research in Interfacial and Materials Engineering 2013 Annual Meeting
- 19 -
Wed, May 29, 1:20-5:00 PM Keller Hall, room 3-125
Biomaterials and Pharmaceutical Materials Program Review
Ron Siegel, Program Leader
Time Title Authors
1:20 PM Frontiers in Crystal Engineering Sathyanarayana Perumalla, UMN Calvin Sun, UMN
1:40 PM Biodegradable Semi-solid Polymers for Drug Delivery and Biodegradable Epoxy Elastomers as Surface Coating
Chun Wang, UMN
2:00 PM Engineering of Biomaterials Using Intelligent Biopolymers
Wei Shen, UMN
2:20 PM Dual Responsive Block Polymers: A Reversible Micellization and Gelation Approach
Isha Koonar, UMN Ronald A. Siegel, UMN
2:40 PM BREAK
3:20 PM Engineered Cardiovascular Tissues Lee Meier, UMN Robert Tranquillo, UMN
3:40 PM Quantification, Mechanism and Mitigation of Active Ingredient Phase Transformation in Tablets
Naveen Thakral, UMN Raj Suryanarayanan, UMN
4:00 PM Novel Silicate Prodrug Nanoparticles for Drug Delivery: Characterization and In Vitro Drug Release
Jing Han, UMN Andrew Michel, UMN Han Seung Lee, UMN Stephen Kalscheuer, UMN Chris Macosko, UMN Tom Hoye, UMN Alon McCormick, UMN Jayanth Panyam, UMN
Industrial Partnership for Research in Interfacial and Materials Engineering 2013 Annual Meeting
- 20 -
Wed, May 29, 1:30-5:00 PM Keller Hall, room 3-180
Coating Process Fundamentals Program Review I
Lorraine Francis & Satish Kumar, Program Leaders
Time Title Authors
1:30 PM On the Mechanism of Dynamic Wetting Failure Eric Vandre, UMN Marcio Carvalho, PUC-Rio Satish Kumar, UMN
1:50 PM Intermixing of Particle Dispersions with Polymers in Multilayer Drying
Tomohiko Anazawa,
Dai Nippon Printing* Satish Kumar, UMN Wieslaw Suszynski, UMN
2:10 PM Response of Two-Layer Slot Coating Flows to Periodic External Disturbances
Danmer Maza, PUC-Rio Marcio Carvalho, PUC-Rio
2:30 PM BREAK
3:10 PM Optimization of Aerosol Jet Printing For High Resolution, High Aspect Ratio Silver Lines
Ankit Mahajan, UMN Wieslaw Suszynksi, UMN C. Daniel Frisbie, UMN Lorraine F. Francis, UMN
3:30 PM Continuous Coating of Copper Zinc Tin Sulfide Nanocrystal Dispersions
Bryce Williams, UMN Eray Aydil, UMN Lorraine Francis, UMN
3:50 PM Thermal and Electrohydrodynamic Instabilities for Surface Patterning
Andrew Corbett, UMN Satish Kumar, UMN
4:10 PM Poster Introductions Robert Lade, UMN Weihua Li, UMN Chen-yu Liu, UMN Yan Wu, UMN Wanlu Zhang, UMN
*IPrime Industrial Fellow
Industrial Partnership for Research in Interfacial and Materials Engineering 2013 Annual Meeting
- 21 -
Thu, May 30, 8:40-11:40 AM Keller Hall, room 3-180
Coating Process Fundamentals Program Review II
Lorraine Francis & Satish Kumar, Program Leaders
Time Title Authors
8:40 AM Gravure printing: Liquid transfer from cells and grooves
Diego Campana, PUC-RIO and INTEC-CONICET Marcio Carvalho, PUC-RIO
9:00 PM Electrostatically Assisted Deformation of a Liquid Meniscus Near a Cavity
Aruna Ramkrishnan, UMN Satish Kumar, UMN
9:20 AM Improving Resolution for Roll-to-Roll Printed Electronics
Heng Zhang, UMN Alexander Ramm, UMN Sooman Lim, UMN Wieslaw J. Suzynski, UMN C. Daniel Frisbie, UMN Lorraine F. Francis, UMN
9:40 AM BREAK
10:20 AM Characterization of Stress Development in Particulate Coatings
Kyle Price, UMN Alon McCormick, UMN Lorraine Francis, UMN
10:40 AM Slot Coating of Non-Colloidal Particle Suspension Simone Araujo, PUC-Rio Luis Diego Silva, PUC-Rio Diego Campana, PUC-Rio Marcio Carvalho, PUC-Rio
11:00 AM Analysis of the Binder Distribution in Electrode During Drying
Hideki Hagiwara, Toyota*
Lorraine F. Francis, UMN
11:20 AM Forced Spreading and Evaporation of Films and Droplets of Colloidal Suspensions
Leonardo Espin, UMN Satish Kumar, UMN
*IPrime Industrial Fellow
Industrial Partnership for Research in Interfacial and Materials Engineering 2013 Annual Meeting
- 22 -
Wed, May 29, 1:15-5:00 PM Keller Hall, room 2-260
Magnetic Heterostructures Program Review
Paul Crowell, Program Leader
Time Title Authors
1:15 PM Introduction Paul Crowell, UMN
1:20 PM Capitalizing on Interface Effects by Creating "Artificial" Interfaces within a Material
Brittany Nelson-Cheeseman, U of St. Thomas
2:00 PM Orientation and Strain Dependence of the Magnetic Phase Separation at Perovskite Cobaltite Interfaces
Shameek Bose, UMN Manish Sharma, UMN Maria A. Torija, UMN Josh Schmitt, UMN Chris Leighton, UMN Jaume Gazquez, UC Madrid & ORNL Maria Varela, UC Madrid & ORNL Haile Ambaye, ORNL Rick J. Goyette, ORNL Valeria Lauter, ORNL Michael R. Fitzsimmons, 3M
2:20 PM Quantifying Spin-Injection and Detection Efficiencies Using Multi-Terminal Ferromagnet-Semiconductor Devices
Chad Geppert, UMN Kevin Christie, UMN Nicholas Krueger, UMN Sahil Patel, U of CA-Santa Barbara Chris Palmstrøm, UMN Paul Crowell, UMN
2:40 PM BREAK
3:20 PM Novel Approaches for Thin Films Growth: Towards Oxide Electronics
Bharat Jalan, UMN
4:00 PM Telegraph Noise in Square Permalloy Dots: A Model System for Studying Low-Frequency Magnetic Noise
Daniel Endean, UMN Chad T. Weigelt, UMN Randall H. Victora, UMN E. Dan Dahlberg, UMN
Industrial Partnership for Research in Interfacial and Materials Engineering 2013 Annual Meeting
- 23 -
Wed, May 29, 1:15-5:00 PM Keller Hall, room 3-210
Microstructured Polymers Program Review I David Morse (for Marc Hillmyer, Program Leader)
Time Title Authors
1:15 PM Introduction Tim Lodge, UMN
1:20 PM Thermodynamics of Block Copolymer Micellization in Ionic Liquid Solvents
Megan L. Hoarfrost, UMN Timothy P. Lodge, UMN
1:40 PM Two-Compartment Hydrogels from Thermoresponsive ABC Triblock Terpolymers
Can Zhou, UMN Tim Lodge, UMN
2:00 PM Morphology, Modulus, and Ionic Conductivity of a Triblock Terpolymer/Ionic Liquid ElectrolyteMembrane
Lucas McIntosh, UMN Tim Lodge, UMN
2:20 PM Synthesis and Utility of PE-g-PMMA Copolymers in PE/PMMA Blends
Yuewen Xu, UMN Timothy Lodge, UMN Marc Hillmyer, UMN
2:40 PM BREAK
3:20 PM Cavitation in Block Copolymer Modified Epoxies Revealed by Simultaneous SAXS/Tensile Experiments
Carmelo Declet-Perez, UMN Lorraine F. Francis, UMN Frank S. Bates, UMN
3:40 PM Synthetic Strategies Towards Polypropylene-Based Bottlebrush Copolymers
Sam Dalsin, UMN Frank Bates, UMN Marc Hillmyer, UMN
4:00 PM Sustainable Poly (lactide-b-butadiene) Multiblock Copolymers with Enhanced Mechanical Properties
Tessie Panthani, UMN Intaek Lee, UMN Frank S. Bates, UMN
4:20 PM Nanofibers From Melt Blown Fiber-In-Fiber Polymer Blends
Zaifei Wang, UMN Feng Zuo, BASF Dawud H. Tan, 3M Soondeuk Jeung, Cummins Filtration Christopher Macosko, UMN Frank S. Bates, UMN
Industrial Partnership for Research in Interfacial and Materials Engineering 2013 Annual Meeting
- 24 -
Thu, May 30, 8:20-11:40 AM Keller Hall, room 3-210
Microstructured Polymers Program Review II David Morse (for Marc Hillmyer, Program Leader)
Time Title Authors
8:20 AM Stabilization of Cocontinuous Polymer Blends Via Interfacial Localization of Nanoclays
Aaron Hedegaard, UMN Milana Trifkovic, U of Calgary Chris Macosko, UMN
8:40 AM Investigating the Order-Disorder Transition in Simulations of Diblock Copolymer Melts
Pavani Medapuram, UMN David Morse, UMN
9:00 AM Thermoplastic Polyurethanes from Bio-Based Poly(δ-Decalactone) Diols
Donglin Tang, UMN Marc Hillmyer, UMN Chris Macosko, UMN
9:20 AM Effect of Processing and Tacticity on Tg of PMMA/Graphene Nano-Composites
Shigeru Aoyama, Toray*
Ken-Hsuan Liao, UMN Christopher Macosko, UMN
9:40 AM BREAK
10:20 AM Thermoset Materials from Sugar Derived Dilactones James Gallagher, UMN Theresa Reineke, UMN Marc Hillmyer, UMN
10:40 AM Precise Monomeric Control of Multicomponent Random Copolymers: Excipient Design for Oral Drug Delivery
Jeffrey M. Ting, UMN Tushar S. Navale, UMN Frank S. Bates, UMN Theresa M. Reineke, UMN
11:00 AM Block Vs. Statistical Copolymers for Gene Delivery Dustin Sprouse, UMN Theresa Reineke, UMN
11:20 AM Trehalose-Based Copolymers for Non-Viral Gene Delivery
Zachary P. Tolstyka, UMN Theresa M. Reineke, UMN
*IPrime Industrial Fellow
Industrial Partnership for Research in Interfacial and Materials Engineering 2013 Annual Meeting
- 25 -
Wed, May 29, 1:15-5:00 PM Mechanical Engineering, room 18
Nanostructural Materials and Processes Program Review I Alon McCormick, Program Leader
Time Title Authors
1:15 PM Overview C. Dan Frisbie, UMN
1:20 PM A Comprehensive Approach for Characterizing the Extent of Reaction and Dispersity Index in SAMs (Self-Assembled Monolayers) of Molecular Wires.
Abel Demissie, UMN C. Daniel Frisbie, UMN
1:40 PM Overview Andreas Stein, UMN
1:45 PM Conversion of Three-Dimensionally Ordered Macroporous TiO2 to High Surface Area Hierarchical Titanate Nanostructures with Li-Ion Intercalation Activity
Nicholas Petkovich, UMN Stephen Rudisill, UMN Andreas Stein, UMN
2:05 PM Effects of Pore Architecture on Capacitance of Mesoporous Carbon-Based Supercapacitors
Benjamin Wilson, UMN Anh Vu, UMN Andreas Stein, UMN
2:25 PM The Effects of Integrated Carbon as a Light Absorber on the Coloration of Photonic Crystal-based Pigments
David Josephson, UMN Andreas Stein, UMN
2:45 PM BREAK
3:20 PM Overview Wayne Gladfelter, UMN J. Ilja Siepmann, UMN
3:25 PM Colloidal Surface Studies Relevant to the Dye Sensitized Solar Cell (DSSC)
Rajan Vatassery, UMN J. Ilja Siepmann, UMN Wayne Gladfelter, UMN
3:45 PM Overview Michael Tsapatsis, UMN
Industrial Partnership for Research in Interfacial and Materials Engineering 2013 Annual Meeting
- 26 -
Wed, May 29, 1:15-5:00 PM Mechanical Engineering, room 18
Nanostructural Materials and Processes Program Review I cont’d Alon McCormick, Program Leader
Time Title Authors
3:50 PM Understanding Solution-Phase Adsorption of Alcohols onto All-Silica Zeolites: Accurate Prediction by Molecular Simulation Using a Transferable Force Field
Peng Bai, UMN Michael Tsapatsis, UMN J. Ilja Siepmann, UMN
4:10 PM Zeolite Adsorbents and Catalysts for Sugar Conversions
Nafiseh Rajabbeigi, UMN Michael Tsapatsis, UMN
4:30 PM Zeolite Membranes for CO2 Capture Bahman Elyassi, UMN Z. Zhang, UMN Michael Tsapatsis, UMN
Industrial Partnership for Research in Interfacial and Materials Engineering 2013 Annual Meeting
- 27 -
Thu, May 30, 8:20-11:40 AM Mechanical Engineering, room 18
Nanostructural Materials and Processes Program Review II
Alon McCormick, Program Leader
Time Title Authors
8:20 AM Overview Alon McCormick, UMN Wei Zhang, UMN
8:25 AM Characterization of an Early-Stage Membrane Fusion Intermediate of Sindbis Virus using Cryo-electron Microscopy
Sheng Cao, UMN Wei Zhang, UMN
8:45 AM The Role of Microscopy in Self-Assembly: Emulsion Processing and Drug Delivery
Hanseung Lee, UMN Chris Frethem, UMN Eric Morrison, EarthClean Qiao Zhang, UMN Jing Han, UMN Chris Macosko, UMN Alon McCormick, UMN
9:05 AM Oil Spill Dispersants: Mechanisms of Action and Alternative Applications
David Riehm, UMN Alon McCormick, UMN
9:25 AM Metal Salts for Enhanced Gas Absorption Heath Himstedt, UMN Alon McCormick, UMN Edward Cussler, UMN
9:45 AM BREAK
10:20 AM Overview - AFM and Charfac Greg Haugstad, UMN
10:40 AM Nanoscale Characterization of Polymer-Inorganic Nanocomposites by AFM
Greg Haugstad, UMN
Bill Coggio, Cabot Corp* Jake Warner, UMN
11:00 AM AFM and Tribological Investigations of UV-Crosslinked Coatings
Greg Haugstad, UMN
Maggie Zeng, Boston Sci*
Alon McCormick, UMN
11:20 AM Overview - Nanoparticles Lee Penn, UMN
11:30 AM Overview - Interfacial Rheology Joe Zasadzinski, UMN
*IPrime Industrial Fellow
Industrial Partnership for Research in Interfacial and Materials Engineering 2013 Annual Meeting
- 28 -
Wed, May 29, 1:15-5:00 PM Keller Hall, room 3-111
Organic Optoelectronic Interfaces Program Review Russ Holmes (for C. Daniel Frisbie, Program Leader)
Time Title Authors
1:15 PM Introduction Russell J. Holmes, UMN
1:30 PM Relating Spatial Composition and Performance in Organic Light-Emitting Devices
Nicholas C. Erickson, UMN Sankar Raman, Physical Electronics Scott Bryan, Physical Electronics Russell J. Holmes, UMN
1:50 PM Molecular Dewetting at Organic Semiconductor/Insulator Interface Observed by Scanning Probe Microscopy
Yanfei Wu, UMN Greg Haugstad, UMN C. Daniel Frisbie, UMN
2:10 PM Enhancement of Ambipolar Transport in Rubrene-Based Single Crystal Transistors with Single-Walled Carbon Nanotube Modified Contacts
Wei Xie, UMN Katie McGarry, UMN Pradyumna Prabhumirashi, Northwestern Univ Mark Hersam, Northwestern Univ Chris Douglas, UMN C. Daniel Frisbie, UMN
2:30 PM Printed and Low-Voltage Complementary Circuits Constructed From High-Performance Electrolyte Gated Transistors
Kihyon Hong, UMN Se Hyun Kim, UMN C. Daniel Frisbie, UMN
2:50 PM Studies into the Synthesis of [8]cyclacene Sarah Wegwerth, UMN Chris Douglas, UMN
3:10 PM BREAK
Industrial Partnership for Research in Interfacial and Materials Engineering 2013 Annual Meeting
- 29 -
Wed, May 29, 1:15-5:00 PM Keller Hall, room 3-111
Organic Optoelectronic Interfaces Program Review cont’d Russ Holmes (for C. Daniel Frisbie, Program Leader)
Time Title Authors
3:40 PM Influence of MoOx Interlayer on the Maximum Achievable Open-Circuit Voltage in Organic Photovoltaic Cells
Yunlong Zou, UMN Russell J. Holmes, UMN
4:00 PM Improving Organic Photovoltaic Device Efficiency Through a Tunnel Interface Engineering
Feilong Liu, UMN Paul Ruden, UMN
4:20 PM Connecting Molecular Structure and Exciton Diffusion Length in Rubrene Derivatives
Tyler Mullenbach, UMN Kathryn McGarry, UMN Wade Luhman, UMN Christopher Douglas, UMN Russell Holmes, UMN
4:40 PM Ultrafast Exciton Localization to Aggregates in P3HT Thin Films
Tom Pundsack, UMN David Blank, UMN
Industrial Partnership for Research in Interfacial and Materials Engineering 2013 Annual Meeting
- 30 -
Tue, May 28, 1:30-5:20 PM Keller Hall, room 3-115
Renewable Energy Materials Program Review Eray Aydil and Uwe Kortshagen, Program Leaders
Time Title Authors
1:30 PM Introduction and Overview Uwe Kortshagen, UMN Eray Aydil, UMN
1:45 PM Nonthermal Plasma Synthesis of ZnS and Al:ZnO Nanocrystals for Optoelectronic Applications
Elijah Thimsen, UMN Jihua Yang, UMN Ben Greenberg, UMN Eray Aydil, UMN Uwe Kortshagen, UMN
2:15 PM Hypervalent Surface Interactions for Colloidal Stability and Doping of Silicon Nanocrystals
Lance Wheeler, UMN Nathan Neale, NREL Ting Chen, UMN Uwe Kortshagen, UMN
2:35 PM Alkali Metal Enhanced Grain Growth in Cu2ZnSnS4 Thin Films
Eray S. Aydil, UMN Melissa Johnson, UMN Sergey Baryshev, ANL Michael Manno, UMN Elijah Thimsen, UMN Xin Zhang, UMN Christopher Leighton, UMN
3:00 PM BREAK
Industrial Partnership for Research in Interfacial and Materials Engineering 2013 Annual Meeting
- 31 -
Tue, May 28, 1:30-5:20 PM Keller Hall, room 3-115
Renewable Energy Materials Program Review cont’d Eray Aydil and Uwe Kortshagen, Program Leaders
Time Title Authors
3:50 PM Photochemical Degradation of Alkylated Silicon Nanocrystals
Jeslin Wu, UMN Uwe R. Kortshagen, UMN
4:10 PM Atomic Layer Deposition of Transparent Conducting Multimetallic Oxide Films for Photovoltaic Applications
Wayne Gladfelter, U MN Ellis Warner, U MN
4:30 PM Continuous-Flow Chemical Bath Deposition of ZnxCd1-
xS Buffer Thin Films for CIGS-Based Solar Cells Joel T. Abrahamson, UMN B. Selin Tosun, UMN Christopher Cheng, UMN Stephen Campbell, UMN Eray S. Aydil, UMN
4:50 PM Engineered Biosynthesis of Medium-chain Esters as Advanced Biofuels
Yi-Shu Tai, UMN Mingyong Xiong, UMN Kechun Zhang, UMN
Industrial Partnership for Research in Interfacial and Materials Engineering 2013 Annual Meeting
- 32 -
Tue and Wed, May 28 - 29, 5:45-7:00 / 7:30 PM
McNamara Alumni Center, Memorial Hall
POSTER SESSION In alphabetical + numerical order by IPrime Partnership Program
Program Poster numbers Page(s)
BB 1–8 35
BPM 9–17 36–37
CPF 18–40 37–39
MH 41–48 40–41
MP 49–82 41–45
NMP 83–94 46–47
OEI 95–106 48–49
REM 107–112 50
Industrial Partnership for Research in Interfacial and Materials Engineering 2013 Annual Meeting
- 33 -
NOTES
Industrial Partnership for Research in Interfacial and Materials Engineering 2013 Annual Meeting
- 34 -
1/2
BB
3/4
BB
5/6
BB
7/8
BB
9/10
BPM
11/12
BPM
13/14
BPM
15/16
BPM
17
BPM
18/19
CPF
20/21
CPF
22/23
CPF
46/45
MH
44/43
MH
42/41
MH
40
CPF
39/38
CPF
37/36
CPF
35/34
CPF
33/32
CPF
31/30
CPF
29/28
CPF
27/26
CPF
25/24
CPF
47/48
MH
49/50
MP
51/52
MP
53/54
MP
55/56
MP
57/58
MP
59/60
MP
61/62
MP
63/64
MP
81/82
MP
80/79
MP
78/77
MP
76/75
MP
74/73
MP
72/71
MP
70/69
MP
68/67
MP
66/65
MP
83/84
NMP
85/86
NMP
87/88
NMP
89/90
NMP
91/92
NMP
93/94
NMP
104/103
OEI
102/101
OEI
100/99
OEI
98/97
OEI
96/95
OEI OPEN
105/106
OEI OPEN
107/108
REM
OPEN 112/111
REM
110/109
REM
IPrime Poster Session Layout McNamara Alumni Center, Memorial Hall
Tue and Wed, May 28-29, 5:45-7:00 / 7:30p
M
SI
MR
SEC
Ch
arFa
c B
TI /
UIC
Stage
EXIT
Johnson Great Room
Handouts Buffets
Walnut St. Entrance
Un
iver
sity
Ave
Oak St SE
Was
hin
gto
n A
ve
Restrooms
Memorial Hall not to scale
Industrial Partnership for Research in Interfacial and Materials Engineering 2013 Annual Meeting
- 35 -
IPrime Poster Session University of Minnesota author unless otherwise noted
Biocatalysis and Biotechnology
Poster # Program Author Title
1 BB Mingyong Xiong Kechun Zhang
Biobased Production of a Novel Polymer Monomer- β-Methyl-δ-Valerolactone
2 BB Jonathan Dozier Mark Distefano
Enzymatic Creation of Protein Therapeutics: Farnesyltransferase as a Better Protein Labeling Reagent
3 BB Liting Zhang Thin-Film Enzyme Coating in Paper-Printed Micowells for Point-of-Care-Bioassay
4 BB Yen-Chih Wang Solid-Phase Synthesis of C-Terminal Peptide Libraries for Studying the Specificity of Enzymatic Protein Farnesylation
5 BB John Barrett Ahmed Abdala, PTI Friedrich Srienc
Enhanced Properties of Polyhydroxyalkanoate Bioplastics using Graphene Nanofiller
6 BB Luz Perez John S. F. Barrett Friedrich Srienc
Control of the Carbon Flux in Ralstonia Eutropha H16 for the Production of Useful Metabolites
7 BB Shunxiang Xia Nanoscale Enzyme Reactor for CO2 Fixing
8 BB Bo Tang Immobilization of bacteria on carbon nanotube enriched electrode to generate power
Industrial Partnership for Research in Interfacial and Materials Engineering 2013 Annual Meeting
- 36 -
IPrime Poster Session
University of Minnesota author unless otherwise noted
Biomaterials and Pharmaceutical Materials Poster # Program Authors Title
9 BPM Yaoying Wu Theresa Reineke
Structural Impact and Targeting Effect of Diblock Glycopolymer pDNA Delivery System
10 BPM Jing Han Chris Macosko Tom Hoye Jayanth Panyam
Silicate Prodrug Polymeric Nanoparticles with Controlled Drug Release
11 BPM Tim Pearce Brett Waybrant Efie Kokkoli
Designing Aptamer-Amphiphiles to Improve Nanoparticle Drug Delivery
12 BPM Rachel M. Levine Tim R. Pearce Maroof Adil Efie Kokkoli
Preparation and Characterization of Liposome-Encapsulated Plasmid DNA for Gene Delivery
13 BPM Jeremiah Riesberg Wei Shen
Developing Capillary Networks in Large, Porous, 3D Hydrogels for Tissue Engineering
14 BPM Andrew Michel Highly Loaded PEG-B-PLGA Nanoparticles of Taxane Silicates to Optimize the Therapeutic Window of the Chemotherapy
15 BPM Rachel Marullo, CooperVision* Shahab Siddiqui, CooperVision Jun Sato, CooperVision Tahua Yang, CooperVision Chris Macosko
Exploration of the Rheology and Microstructure of Soft Contact Lenses
16 BPM Xiao Zhong Chun Wang
Polyplex-Induced Autophagy is Correlated with Polymer-Mediated Gene Delivery to Fibroblasts
*IPrime Industrial Fellow
Industrial Partnership for Research in Interfacial and Materials Engineering 2013 Annual Meeting
- 37 -
IPrime Poster Session
University of Minnesota author unless otherwise noted
Biomaterials and Pharmaceutical Materials cont’d Poster # Program Authors Title
17 BPM Weihang Ji David Panus Xiaoze Jiang Chun Wang
Hydrophobicity Matters: Influence of Alkyl Side Chain Length on Gene Delivery to Dendritic Cells Mediated By Poly(Aminoalkyl Methacrylate) Homopolymers
Coating Process Fundamentals
18 CPF Toshihide Horii, Panasonic*
Marcio Carvalho, PUC-Rio
Satish Kumar
Ultra-Thin Coating with Tensioned-Web Method and Thickness Fluctuation Analysis by Real-Time Thickness Measurement Method and Numerical Model
19 CPF Tomohiko Anazawa,
Dai Nippon Printing*
Satish Kumar Wieslaw Suszynski
Intermixing of Particle Dispersions with Polymers in Multilayer Drying
20 CPF Leonardo Espin Satish Kumar
Forced Spreading and Evaporation of Films and Droplets of Colloidal Suspensions
21 CPF Eric Vandre Marcio Carvalho, PUC-Rio
Satish Kumar
Characteristics of Air Entrainment During High-Speed Wetting
22 CPF Aruna Ramkrishnan Satish Kumar
Electrostatically Assisted Deformation of a Liquid Meniscus Near a Cavity: Applications to Printing Processes
23 CPF Andrew Corbett Satish Kumar
Thermal and Electrohydrodynamic Instabilities for Surface Patterning
*IPrime Industrial Fellow
Industrial Partnership for Research in Interfacial and Materials Engineering 2013 Annual Meeting
- 38 -
IPrime Poster Session
University of Minnesota author unless otherwise noted
Coating Process Fundamentals cont’d
Poster # Program Authors Title
24 CPF Bryce Williams Eray Aydil Lorraine Francis
Continuous Coating of Copper Zinc Tin Sulfide Nanocrystal Dispersions
25 CPF Chen-Yu Liu Satish Kumar
Mechanisms of Dynamic Wetting Failure in Surfactant Solutions
26 CPF Weihua Li Satish Kumar
Coating of Discrete Objects
27 CPF
Yan Wu Lorraine Francis
The Drying Behavior of Ceramic Coatings
28 CPF Kyle Price Alon McCormick Lorraine Francis
Characterization of Stress Development in Particulate Coatings
29 CPF Ryo Horiuchi, Asahi KASEI*
Wieslaw J. Suszynski Marcio S. Carvalho, PUC-Rio
Satish Kumar
Simultaneous Multilayer Coating
30 CPF Diego Campana, PUC-Rio
and INTEC-CONICET
Marcio Carvalho, PUC-Rio
Gravure printing: Liquid transfer from cells and grooves
31 CPF Hideki Hagiwara, Toyota*
Lorraine F. Francis
Analysis of the Binder Distribution in Electrode During Drying
32 CPF Robert Lade Lorraine Francis Chris Macosko
Characterizing Local Rheological Behavior of Coatings with Magnetic Microrheometry
33 CPF Wanlu Zhang Processing of Oriented Zeolite Nanosheet Film
*IPrime Industrial Fellow
Industrial Partnership for Research in Interfacial and Materials Engineering 2013 Annual Meeting
- 39 -
IPrime Poster Session
University of Minnesota author unless otherwise noted
Coating Process Fundamentals cont’d Poster # Program Authors Title
34 CPF Simone Araujo, PUC-Rio Luis Diego Silva, PUC-Rio Diego Campana, PUC-Rio Marcio Carvalho, PUC-Rio
,
Slot Coating of Non-Colloidal Particle Suspension
35 CPF Danmer Maza, PUC-Rio Marcio Carvalho, PUC-Rio
Response of Two-Layer Slot Coating Flows to Periodic External Disturbances
36 CPF Sarit Dutta Kevin D. Dorfman Satish Kumar
Dynamic Simulation of Polymer Adsorption in Flowing Fluids for Design of Polymer Thin-Film Materials
37 CPF Tuoqi Li Lorraine Francis Frank Bates
Block Copolymer Toughened Epoxy Coatings
38 CPF Ankit Mahajan Wieslaw Suszynksi C. Daniel Frisbie Lorraine F. Francis
Optimization of Aerosol Jet Printing For High Resolution, High Aspect Ratio Silver Lines
39 CPF Bahman Elyassi Z. Zhang Michael Tsapatsis
Zeolite Membranes for CO2 Capture
40 CPF Toshihide Horii, Panasonic*
Marcio Carvalho, PUC-Rio
Satish Kumar
Ultra-Thin Coating with Tensioned-Web Method and Thickness Fluctuation Analysis by Real-Time Thickness Measurement Method and Numerical Model
*IPrime Industrial Fellow
Industrial Partnership for Research in Interfacial and Materials Engineering 2013 Annual Meeting
- 40 -
IPrime Poster Session
University of Minnesota author unless otherwise noted
Magnetic Heterostructures Poster # Program Authors Title
41 MH Liam O'Brien Dima Spivak Mike Erickson Haile Ambaye, Oak Ridge National Laboratory Ric Goyette, Oak Ridge National Laboratory Valeria Lauter,
Oak Ridge National Laboratory Paul Crowell Chris Leighton
Materials Physics of Lateral Spin Valves
42 MH Mehmet Topsakal Koichiro Umemoto Renata Wentzcowitch
First-principles study of RCoO3 (R=Lu,Gd) and their comparison with LaCoO3
43 MH Bethanie Stadler Sang-Yeob Sung Mazin Maqableh
Spin Torque NanoDevices with Long-Range Self-Assembled Order over Areas of Square Inches
44 MH Angeline Klemm, MINT & ECE
Jonathan Harms, MINT & ECE
Andrew Lyle, MINT & ECE August Lentsch, MINT & ECE
Daniel Martens, MRSEC REU
Jian-Ping Wang, MINT & ECE
Spin Transfer Torque Programming and Clocking Field Effects for Dipole Coupled Nanomagnetic Arrays
45 MH Bern Youngblood Greg McKusky, Seagate Feng Guo, NIST E. Dan Dahlberg
Looking for Density-of-States Effects in Tunneling Conductance
Industrial Partnership for Research in Interfacial and Materials Engineering 2013 Annual Meeting
- 41 -
IPrime Poster Session
University of Minnesota author unless otherwise noted
Magnetic Heterostructures cont’d
Poster # Program Authors Title
46 MH Srinivas Polisetty Jeff Walter Shameek Bose Shun Wang Chris Leighton
Influence of Substrate Phase Transformation and Electrostatic Doping on Magneto-Transport Properties of Epitaxial La0.5Sr0.5CoO3-δ
47 MH Xiaohui Chao Yisong Zhang Jian-Ping Wang
Spin Torque Oscillation in Dual Magnetic Tunneling Junction
48 MH Barry N. Costanzi E. Dan Dahlberg Lyuba Belova, KTH Institute Anastasia Riazanova, KTH Institute
Non-Local Transport Measurements in Double Barrier Tunnel Junctions
Microstructured Polymers
49 MP Intaek Lee Tessie Panthani Frank S. Bates
Sustainable Poly(lactide-b-butadiene) Multiblock Copolymers with Enhanced Mechanical Porperties
50 MP Jie Lu Timothy Lodge Frank Bates
Chain Exchange in Binary Copolymer Micelles at Equilibrium
51 MP Sangwon Kim Frank Bates
Consequences of Surface Neutralization in Thin Film Block Copolymers
52 MP Arthur Bertrand Marc Hillmyer
Nanoporous Polylactide Through Olefin Metathesis Degradation
Industrial Partnership for Research in Interfacial and Materials Engineering 2013 Annual Meeting
- 42 -
IPrime Poster Session
University of Minnesota author unless otherwise noted
Microstructured Polymers cont’d
53 MP Zhen Ren Kristina Masica Marc Hillmyer
Toughening Polylactide with Castor Oil Derivatives
54 MP Aaron Hedegaard Liangliang Gu Chris Macosko
Role of Extensional Viscosity in the Formation and Control of Cocontinuous Polymer Blends
55 MP Michael J. Heinzer Lorraine F. Francis Frank S. Bates
Block Copolymer Toughened Epoxies
56 MP Jae-Hong Choi C. Daniel Frisbie Timothy P. Lodge
Ion Gel Thin Films for High Performance Polymer Electrolytes
57 MP Jinchul Kim Myunguen Seo Marc A. Hillmyer Lorraine F. Francis
Probing Changes in Local Viscosity of a Block Copolymer Solution During In-Situ Drying by Magnetic Microrheology
58 MP Kei Yoshida, Nitto Denko*.
David Morse
Simulation of the Self-Assembly Evolution in Binary and Ternary Phase Separation
59 MP Youngmin Lee Adam Gladen Susan C. Mantell Jane Davidson Marc A. Hillmyer
Designer Thermotropic Materials for Overheat Protection in Solar Collectors
*IPrime Industrial Fellow
Industrial Partnership for Research in Interfacial and Materials Engineering 2013 Annual Meeting
- 43 -
Poster Session
University of Minnesota author unless otherwise noted
Microstructured Polymers cont’d
Poster # Program Authors Title
60 MP Christopher Thurber Christopher Macosko Timothy Lodge
Catalyzed Reactive Compatibilization Chemistry for PMMA/PE Blends
61 MP Karen Haman Frank Bates
Amphiphilic Block Copolymer Interactions with Model Cell Membranes
62 MP John McAllister Joseph Lott Frank Bates Timothy Lodge
Fibrillar Structure of Methylcellulose Hydrogels
63 MP Nilesh P. Ingle Theresa M. Reineke
Function of filopodia to transport polymeric nucleic acid delivery vehicles to cell surface
64 MP William Boyle End-Functionalization of β-Cyclodextrin Based Cationic Glycopolymers for Gene Delivery
65 MP Debbie Schneiderman Henry Martinez Marc A. Hillmyer
Thermodynamics of the Polymerization of Alkyl Substituted δ-Lactones
66 MP Yong Tae Park Yuqiang Qian Frank Thibodeau, Adama Materials Steve Speak, Adama Materials Andreas Stein Chris Macosko
Toughening Epoxy with Very Low Graphene Content
Industrial Partnership for Research in Interfacial and Materials Engineering 2013 Annual Meeting
- 44 -
Poster Session
University of Minnesota author unless otherwise noted
Microstructured Polymers cont’d Poster # Program Authors Title
67 MP Swapnil Tale Development of Polytrehalose Functionalized Micelles for Drug Delivery
68 MP Kevin Anderson Theresa Reineke
Trehalose Polycation-Mediated RNA Interference
69 MP Paula Delgado A Hydrogen Bonding Approach to Toughening PLA
70 MP Haley Phillips Theresa Reineke
Elucidating Structure-Activity Relationships of Novel Diblock Glycopolymers In Situ, In Vitro, and In Vivo
71 MP Yuqiang Qian Yong Tae Park Chris Macosko Andreas Stein
Functionalization of graphene oxide for toughening of unsaturated polyesters
72 MP Fariborz Parsi, RTP Brian Bagley Chris Macosko Steve Maki , RTP
Visualization and Analysis of Fiber Orientation in Injection Molded Chopped Fiber Composites by means of Micro-CT
73 MP Yuanyan Gu Sipei Zhang C. Daniel Frisbie Timothy P. Lodge
Tough Ion Gels via End-block Crosslinking
74 MP Jens Glaser David Morse
Identifying the Order-Disorder Transition of Diblock Copolymers Using Metadynamics Implemented on Multiple GPUs
Industrial Partnership for Research in Interfacial and Materials Engineering 2013 Annual Meeting
- 45 -
IPrime Poster Session
University of Minnesota author unless otherwise noted
Microstructured Polymers cont’d Poster # Program Authors Title
75 MP Justin Kennemur Marc Hillmyer Frank Bates
Comprehensive Design of Block Copolymers for Lithographic Patterning Applications
76 MP Justin Bolton Marc Hillmyer Thomas Hoye
Sustainable Thermoplastic Elastomers
77 MP Molly Dalsin Theresa Reineke
The Influence of Solution State Assemblies on Amorphous Spray Dried Dispersion Performance
78 MP Athanasios Touris Sangwoo Lee Marc A. Hillmyer Frank S. Bates
Self-Assembly of ABCA’-Type Asymmetric Tetrablocks in Water
79 MP Angelika Neitzel Matthew Petersen Efrosini Kokkoli Marc Hillmyer
Acid-Labile Polymer Synthesis for Application in Drug Delivery
80 MP Han Zhang Christopher Macosko Michael Tsapatsis
Zeolite Membranes on Porous Polymer Support
81 MP Alex Mannion Luca Martinetti Sangwoo Lee Frank S. Bates Christopher W. Macosko
Extensional Behavior of AB/ABA Block Copolymer Blends
82 MP Morgan Schulze Lucas McIntosh Timothy Lodge Marc Hillmyer
One-Step Route to High Modulus and Highly Conductive Polymer Electrolyte Membranes
Industrial Partnership for Research in Interfacial and Materials Engineering 2013 Annual Meeting
- 46 -
IPrime Poster Session
University of Minnesota author unless otherwise noted
Nanostructural Materials and Processes Poster # Program Authors Title
83 NMP Greg Haugstad
Maggie Zeng, Boston Sci*
Alon McCormick
Bill Coggio, Cabot*
Jacob Warner
Probing Heterogeneous Polymer-Matrix Materials Over Nano-to-Micro-Scales with AFM Methods
84 NMP Shigeru Aoyama, Toray*
Yong Tae Park Greg Haugstad Christopher W. Macosko
Measuring adhesion of Polymer to nanofiller: PET to graphene and clay
(109) NMP-REM see #109
Nafiseh Rajabbeigi Michael Tsapatsis
Zeolite Adsorbents and Catalysts for Sugar Conversions
85 NMP Govind Saraswat Greg Haugstad Murti V. Salapaka
Real Time Interrogation of Material Properties at the Nanoscale
86 NMP Jake Warner Mike Manno Jake Myers Greg Haugstad Huijing Fu, Nanocopoeia Pat Ryan, Nanocopoeia Bob Hoerr, Nanocopoeia
Characterization of Electro-Nanosprayed Drug Particles Encapsulated in a Polymer Matrix
87 NMP Benjamin Wilson Anh Vu Andreas Stein
Effects of Pore Architecture on Capacitance of Mesoporous Carbon-Based Supercapacitors
88 NMP Rajan Vatassery J. Ilja Siepmann Wayne Gladfelter
Colloidal Surface Studies Relevant to the Dye Sensitized Solar Cell (DSSC)
*IPrime Industrial Fellow
Industrial Partnership for Research in Interfacial and Materials Engineering 2013 Annual Meeting
- 47 -
IPrime Poster Session
University of Minnesota author unless otherwise noted
Nanostructural Materials and Processes cont’d Poster # Program Authors Title
89 NMP David Riehm Alon McCormick
Oil Spill Dispersants: Mechanisms of Action and Alternative Applications
90 NMP Stephen Rudisill Andreas Stein
Microstructural Control in Ceramics Arising from Template-Directed Polymerization
91 NMP Peng Bai Michael Tsapatsis J. Ilja Siepmann
Understanding Solution-Phase Adsorption of Alcohols onto All-Silica Zeolites: Accurate Prediction by Molecular Simulation Using a Transferable Force Field
(21) CPF-NMP see #21
Bahman Elyassi Z. Zhang Michael Tsapatsis
Zeolite Membranes for CO2 Capture
92 NMP Nicholas Petkovich Stephen Rudisill Andreas Stein
Conversion of Three-Dimensionally Ordered Macroporous TiO2 to High Surface Area Hierarchical Titanate Nanostructures with Li-Ion Intercalation Activity
93 NMP Hanseung Lee Chris Frethem Eric Morrison, EarthClean Qiao Zhang Jing Han Chris Macosko Alon McCormick
The Role of Microscopy in Self-Assembly: Emulsion Processing and Drug Delivery
94 NMP David Josephson Andreas Stein
The Effects of Integrated Carbon as a Light Absorber on the Coloration of Photonic Crystal-based Pigments
Industrial Partnership for Research in Interfacial and Materials Engineering 2013 Annual Meeting
- 48 -
IPrime Poster Session
University of Minnesota author unless otherwise noted
Organic Optoelectronic Interfaces Poster # Program Authors Title
95 OEI Tyler Mullenbach Matthew Menke Russell J. Holmes
Understanding Exciton Energy Transfer Across Complex Interfaces Using the Kinetic Monte Carlo Technique
96 OEI Yunlong Zou Russell J. Holmes
Influence of MoOx Interlayer on the Maximum Achievable Open-Circuit Voltage in Organic Photovoltaic Cells
97 OEI Yanfei Wu Greg Haugstad C. Daniel Frisbie
Molecular Dewetting at Organic Semiconductor/Insulator Interface Observed by Scanning Probe Microscopy
98 OEI Nicholas C. Erickson Sankar Raman, Physical Electronics
Scott Bryan, Physical Electronics
Russell J. Holmes
Relating Spatial Composition and Performance in Organic Light-Emitting Devices
99 OEI Jon Hinke David Blank
Octaethyl Porphyrins: Charge Transfer, Triplet Fusion and Simulations
100 OEI Kihyon Hong Se Hyun Kim C. Daniel Frisbie
Printed and Low-Voltage Complementary Circuits Constructed From High-Performance Electrolyte Gated Transistors
101 OEI Feilong Liu Paul Ruden
Improving Organic Photovoltaic Device Efficiency Through a Tunnel Interface Engineering
Industrial Partnership for Research in Interfacial and Materials Engineering 2013 Annual Meeting
- 49 -
IPrime Poster Session
University of Minnesota author unless otherwise noted
Organic Optoelectronic Interfaces cont’d Poster # Program Authors Title
102 OEI Wei Xie Katie McGarry Pradyumna Prabhumirashi, Northwestern Univ Mark Hersam, Northwestern U Chris Douglas C. Daniel Frisbie
Enhancement of Ambipolar Transport in Rubrene-Based Single Crystal Transistors with Single-Walled Carbon Nanotube Modified Contacts
103 OEI Kathryn McGarry Chris Douglas
Synthetic Efforts Towards an N-Type Organic Semiconductor: Perfluororubrene
104 OEI Tom Pundsack David Blank
Ultrafast Exciton Localization to Aggregates in P3HT Thin Films
105 OEI Victoria Chemistruck Chris Douglas
Investigating the Structure-Property Relationship of Single-Crystal Organic Semiconductors
106 OEI Nathan T. Morgan Yi Zhang Russell J. Holmes Edward L. Cussler
Sublimation Mechanism for Small Molecule Organic Semiconductors
Industrial Partnership for Research in Interfacial and Materials Engineering 2013 Annual Meeting
- 50 -
IPrime Poster Session
University of Minnesota author unless otherwise noted
Renewable Energy Materials Poster # Program Authors Title
107 REM Theodore Knutson Novel Synthesis of Copper Zinc Tin Sulfide and Other Abundant Metal Sulfides
108 REM Ting Chen Charge Transport in Thin Films of Hydrosilylated Silicon Nanocrystals
109 REM Nicolaas J. Kramer Uwe R. Kortshagen
Self-Assembled Silicon Microstructures for Photovoltaic Applications
110 REM Jihua Yang Patrick Felbier, U Duisburg-Essen
Jens Theis, U Duisburg-Essen
Rick Liptak Uwe Kortshagen Gerd Bacher, U Duisburg-Essen
Axel Lorke, U Duisburg-Essen
Synthesis of Luminescent ZnO Quantum Dots Using Nonthermal Plasma Technique
111 REM Boris D. Chernomordik Amelie Beland D. D. Deng Aloysius A. Gunawan David J. Norris, ETH Zürich Eray S. Aydil
Copper Zinc Tin Sulfide Thin Films from Annealed Colloidal Nanocrystal Coatings: Microstructure Evolution
112 REM Nafiseh Rajabbeigi Michael Tsapatsis
Zeolite Adsorbents and Catalysts for Sugar Conversions
Industrial Partnership for Research in Interfacial and Materials Engineering 2013 Annual Meeting
- 51 -
Presentations by
Date & Time
Industrial Partnership for Research in Interfacial and Materials Engineering 2013 Annual Meeting
- 52 -
NOTES
Industrial Partnership for Research in Interfacial and Materials Engineering 2013 Annual Meeting
- 53 -
PRESENTATIONS BY TIME TUESDAY, MAY 28
WS = Workshop PR = Program Review
Time
Event
Title
Authors 1:30 PM MP WS 1 What Prevents Polymer Graphene Nanocomposites From
Reaching Their Theoretical Properties? Chris Macosko
“ CPF WS 1 Use of Tailor Made Amorphous Silica Technology to Enhance Coatings
Maria Nargiello
“ NMP WS Self-Assembly, Colloids, Surfaces, and Nanostructures in Industry Francois Ahimou, Dave Burleson, Jason Heffelfinger, Patti Sanft, Scott Walker, Jinping Dong, Mike Tupy, David Whitcomb, Eric Granstrom
1:45 PM REM PR Nonthermal Plasma Synthesis of ZnS and Al:ZnO Nanocrystals for Optoelectronic Applications
Elijah Thimsen, Jihua Yang, Ben Greenberg, Eray Aydil, Uwe Kortshagen
2:15 PM CPF WS 1 Computational Analysis of Coating Processes Marcio Carvalho
“ REM PR Hypervalent Surface Interactions for Colloidal Stability and Doping of Silicon Nanocrystals
Lance Wheeler, Nathan Neale, Ting Chen, Uwe Kortshagen
2:20 PM MP WS 1 Developments in Polymer/Carbon Nanotube Composite Films and Fibers
Satish Kumar
2:35 PM REM PR Alkali Metal Enhanced Grain Growth in Cu2ZnSnS4 Thin Films Eray S. Aydil, Melissa Johnson, Sergey Baryshev, Michael Manno, Elijah Thimsen, Xin Zhang, Christopher Leighton
3:20 PM CPF WS 1 Treatment and Preparation of Angioplasty Balloons for AFM Material Analysis
Bruce Forsyth, Jacob Warner, Greg Haugstad, Fang Zhou
3:30 PM MP WS 1 Carbon Nanotube and Graphene: From Fluid Phases to Multifunctional Materials
Matteo Pasquali
Rooms CPF: Keller Hall 3-180
MP: Keller Hall 3-210
NMP: Mech Eng 18
REM: Keller Hall 3-115
Industrial Partnership for Research in Interfacial and Materials Engineering 2013 Annual Meeting
- 54 -
PRESENTATIONS BY TIME TUESDAY, MAY 28
WS = Workshop PR = Program Review
3:30 PM REM PR Copper Zinc Tin Sulfide Thin Films from Annealed Colloidal Nanocrystal Coatings: Microstructure Evolution
Boris Chernomordik, Amelie Beland, D. D. Deng, Aloysius A. Gunawan, David J. Norris Eray S. Aydil
3:45 PM CPF WS 1 High Speed Imaging to Characterize Spray Profiles of Waterborne Latex Coatings
Keith Kirkwood*
3:50 PM REM PR Photochemical Degradation of Alkylated Silicon Nanocrystals Jeslin Wu, Uwe R. Kortshagen
4:10 PM CPF WS 1 Academia & Industry Successful Partnership in Precision Coating Technology
Shuzo Fuchigami
REM PR Atomic Layer Deposition of Transparent Conducting Multimetallic Oxide Films for Photovoltaic Applications
Wayne Gladfelter, Ellis Warner
4:20 PM MP WS 1 Graphene Oxide: Some New Insights Into an Old Material Jiaxing Huang
4:30 PM REM PR Continuous-Flow Chemical Bath Deposition of ZnxCd1-xS Buffer Thin Films for CIGS-Based Solar Cells
Joel T. Abrahamson, B. Selin Tosun, Christopher Cheng, Stephen A. Campbell Eray S. Aydil
4:50 PM REM PR Engineered Biosynthesis of Medium-chain Esters as Advanced Biofuels
Yi-Shu Tai, Mingyong Xiong, Kechun Zhang
*Industrial Fellow
Rooms CPF: Keller Hall 3-180
MP: Keller Hall 3-210
NMP: Mech Eng 18
REM: Keller Hall 3-115
Industrial Partnership for Research in Interfacial and Materials Engineering 2013 Annual Meeting
- 55 -
WS = Workshop PR = Program Review
8:25 AM BPM WS Welcome and Introduction Chun Wang
8:30 AM BPM WS Orthopedic Implant Coatings: The Leap From Bench-Side to In Vivo Thomas P. Schaer
“ MP WS 2 Thin Composite Coatings of Purified Single-Wall Carbon Nanotubes: Applications and Durability
Erik Hobbie
“ OEI WS Tandem White OLED Devices Combining Fluorescent and Phosphorescent Emitters for Lighting
Marina Kondakova
9:00 AM CPF WS 2 Perspectives on Solidification and Stress Development in Coatings Lorraine Francis
9:10 AM OEI WS OLED Light Extraction Film Stan Lee
9:15 AM BPM WS Designing Polymers with Protein-like Activity: Novel Antimicrobial Peptide Mimics
Gregory N. Tew
9:20 AM MP WS 2 Engineering Carbon Additives for Functionality in Polymer Composites: From Carbon Block to Graphenes
Angelos Kyrlidis
9:45 AM CPF WS 2 Hershey Coating Applications and Related Interests Julie Hickey
10:15 AM MP WS 2 Toughening of Thermosets with Low Levels of Graphene Yong Tae Park, Yuqiang Qian, Andrewas Stein, Chris Macosko
10:20 AM OEI WS Depth Profiling of OLED Materials by Cluster Ion Beams John Hammond
10:30 AM BPM WS Molecular Understanding, Design and Development of Ultra Low Fouling Zwitterionic-based Functional Materials
Shaoyi Jiang
“ CPF WS 2 Ultra-Thin Coating with Tensioned-Web Method and Thickness Fluctuation Analysis by Real-Time Thickness Measurement Method and Numerical Model
Toshihide Horii* Marcio Carvalho, Satish Kumar
10:40 AM MP WS 2 High Voltage and Shielding Applications for Carbon Nanotube Composites
Sam Dahman
11:00 AM CPF WS 2 Perspectives on Visualization of Coating Processes Wieslaw Suszynski
“ OEI WS Development of Mass Production Thermal Evaporation Process Equipment For Organic Light-Emitting Devices (OLEDs)
Wade Luhman
11:05 AM MP WS 2 Picosecond Heating of Free-Standing and Substrate-Supported CarbonNanotubes Studied with Ultrafast Electron Microscopy
David Flannigan
11:15 AM BPM WS Panel Discussion, Conclusion Chun Wang
*Industrial Fellow
Rooms BB: Keller 3-115
BPM: Keller 3-125
CPF: Keller 3-180
MH: Keller 2-260
MP: Keller Hall 3-210
NMP: Mech Eng 18
OEI: Keller Hall 3-111
PRESENTATIONS BY TIME
WED, MAY 29
Industrial Partnership for Research in Interfacial and Materials Engineering 2013 Annual Meeting
- 56 -
PRESENTATIONS BY TIME
WED, MAY 29
WS = Workshop PR = Program Review
1:15 PM BB WS Opening Remarks Ping Wang
1:20 PM BB WS Forces Stabilizing Proteins Nick Pace
“ BPM PR Frontiers in Crystal Engineering Sathyanarayana Perumalla, Calvin Sun
“ MH PR Capitalizing on Interface Effects by Creating "Artificial" Interfaces within a Material
Brittany Nelson-Cheeseman
“ MP PR 1 Thermodynamics of Block Copolymer Micellization in Ionic Liquid Solvents
Megan Hoarfrost, Timothy P. Lodge
“ NMP PR 1 A Comprehensive Approach for Characterizing the Extent of Reaction and Dispersity Index in SAMs (Self-Assembled Monolayers) of Molecular Wires.
Abel Demissie, C. Daniel Frisbie,
1:30 PM CPF PR 1 On the Mechanism of Dynamic Wetting Failure Eric Vandre, Marcio Carvalho, Satish Kumar
“ OEI PR Relating Spatial Composition and Performance in Organic Light-Emitting Devices
Nicholas Erickson, Sankar Raman, Scott Bryan, Russell J. Holmes
1:40 PM BPM PR Biodegradable Semi-solid Polymers for Drug Delivery and Biodegradable Epoxy Elastomers as Surface Coating
Chun Wang
“ MP PR 1 Two-Compartment Hydrogels from Thermoresponsive ABC Triblock Terpolymers
Can Zhou, Tim Lodge
1:45 PM NMP PR 1 Conversion of Three-Dimensionally Ordered Macroporous TiO2 to High Surface Area Hierarchical Titanate Nanostructures with Li-Ion Intercalation Activity
Nicholas Petkovich, Stephen Rudisill, Andreas Stein
1:50 PM CPF PR 1 Intermixing of Particle Dispersions with Polymers in Multilayer Drying
Tomohiko Anazawa* Satish Kumar, Wieslaw Suszynski
“ OEI PR Molecular Dewetting at Organic Semiconductor/Insulator Interface Observed by Scanning Probe Microscopy
Yanfei Wu, Greg Haugstad, C. Daniel Frisbie
2:00 PM BPM PR Engineering of Biomaterials Using Intelligent Biopolymers Wei Shen
*Industrial Fellow
Rooms BB: Keller 3-115
BPM: Keller 3-125
CPF: Keller 3-180
MH: Keller 2-260
MP: Keller Hall 3-210
NMP: Mech Eng 18
OEI: Keller Hall 3-111
Industrial Partnership for Research in Interfacial and Materials Engineering 2013 Annual Meeting
- 57 -
2:00 PM MH PR Orientation and Strain Dependence of the Magnetic Phase Separation at Perovskite Cobaltite Interfaces
Shameek Bose, Manish Sharma, Maria A. Torija, Josh Schmitt, Chris Leighton, Jaume Gazquez, Maria Varela, Haile Ambaye, Rick J. Goyette, Valeria Lauter, Michael R. Fitzsimmons
2:00 PM MP PR 1 Morphology, Modulus, and Ionic Conductivity of a Triblock Terpolymer/Ionic Liquid ElectrolyteMembrane
Lucas McIntosh, Tim Lodge
2:05 PM NMP PR 1 Effects of Pore Architecture on Capacitance of Mesoporous Carbon-Based Supercapacitors
Benjamin Wilson, Anh Vu, Andreas Stein
2:10 PM BB WS Computational Design of Protein Stability: Stabilized to Order George Makhatadze
“ CPF PR 1 Response of Two-Layer Slot Coating Flows to Periodic External Disturbances
Danmer Maza, Marcio Carvalho
“ OEI PR Enhancement of Ambipolar Transport in Rubrene-Based Single Crystal Transistors with Single-Walled Carbon Nanotube Modified Contacts
Wei Xie, Katie McGarry, Pradyumna Prabhumirashi, Mark Hersam, Chris Douglas, C. Daniel Frisbie
2:20 PM BPM PR Dual Responsive Block Polymers: A Reversible Micellization and Gelation Approach
Isha Koonar, Ronald A. Siegel
“ MH PR Quantifying Spin-Injection and Detection Efficiencies Using Multi-Terminal Ferromagnet-Semiconductor Devices
Chad Geppert, Kevin Christie, Nicholas Krueger, Sahil Patel, Chris Palmstrøm, Paul Crowell
“ MP PR 1 Synthesis and Utility of PE-g-PMMA Copolymers in PE/PMMA Blends
Yuewen Xu, Tim Lodge, Marc Hillmyer
2:25 PM NMP PR 1 The Effects of Integrated Carbon as a Light Absorber on the Coloration of Photonic Crystal-based Pigments
David Josephson, Andreas Stein
2:30 PM OEI PR Printed and Low-Voltage Complementary Circuits Constructed From High-Performance Electrolyte Gated Transistors
Kihyon Hong, Se Hyun Kim, C. Daniel Frisbie
2:50 PM OEI PR Studies into the Synthesis of [8]cyclacene Sarah Wegwerth, Chris Douglas
PRESENTATIONS BY TIME
WED, MAY 29
WS = Workshop PR = Program Review
Rooms BB: Keller 3-115
BPM: Keller 3-125
CPF: Keller 3-180
MH: Keller 2-260
MP: Keller Hall 3-210
NMP: Mech Eng 18
OEI: Keller Hall 3-111
Industrial Partnership for Research in Interfacial and Materials Engineering 2013 Annual Meeting
- 58 -
3:10 PM
CPF PR 1
PRESENTATIONS BY TIME
WED, MAY 29
WS = Workshop PR = Program Review
Optimization of Aerosol Jet Printing For High Resolution, High Aspect Ratio Silver Lines
Ankit Mahajan, Wieslaw Suszynksi, C. Daniel Frisbie, Lorraine F. Francis
3:20 PM BPM PR Engineered Cardiovascular Tissues Lee Meier, Robert Tranquillo
“ MH PR Novel Approaches for Thin Films Growth: Towards Oxide Electronics
Bharat Jalan
“ MP PR 1 Cavitation in Block Copolymer Modified Epoxies Revealed by Simultaneous SAXS/Tensile Experiments
Carmelo Declet-Perez, Lorraine F. Francis, Frank S. Bates
3:25 PM NMP PR 1 Colloidal Surface Studies Relevant to the Dye Sensitized Solar Cell (DSSC)
Rajan Vatassery, J. Ilja Siepmann, Wayne Gladfelter
3:30 PM BB WS Spatial Confinement for Enzyme Stabilization for Industrial Biotechnologies
Ping Wang
“ CPF PR 1 Continuous Coating of Copper Zinc Tin Sulfide Nanocrystal Dispersions
Bryce Williams, Eray Aydil, Lorraine Francis
3:40 PM BPM PR Quantification, Mechanism and Mitigation of Active Ingredient Phase Transformation in Tablets
Naveen Thakral, Raj Suryanarayanan
“ MP PR 1 Synthetic Strategies Towards Polypropylene-Based Bottlebrush Copolymers
Sam Dalsin, Frank Bates, Marc Hillmyer
“ OEI PR Influence of MoOx Interlayer on the Maximum Achievable Open-Circuit Voltage in Organic Photovoltaic Cells
Yunlong Zou, Russell J. Holmes
3:50 PM CPF PR 1 Thermal and Electrohydrodynamic Instabilities for Surface Patterning
Andrew Corbett, Satish Kumar
“ NMP PR 1 Understanding Solution-Phase Adsorption of Alcohols onto All-Silica Zeolites: Accurate Prediction by Molecular Simulation Using a Transferable Force Field
Peng Bai, Michael Tsapatsis, J. Ilja Siepmann
Rooms BB: Keller 3-115
BPM: Keller 3-125
CPF: Keller 3-180
MH: Keller 2-260
MP: Keller Hall 3-210
NMP: Mech Eng 18
OEI: Keller Hall 3-111
Industrial Partnership for Research in Interfacial and Materials Engineering 2013 Annual Meeting
- 59 -
4:00 PM
BPM PR
PRESENTATIONS BY TIME
WED, MAY 29
WS = Workshop PR = Program Review
Novel Silicate Prodrug Nanoparticles for Drug Delivery: Characterization and In Vitro Drug Release
Jing Han, Andrew Michel, Han Seung Lee, Stephen Kalscheuer, Chris Macosko, Tom Hoye, Alon McCormick, Jayanth Panyam
“ MH PR Telegraph Noise in Square Permalloy Dots: A Model System for Studying Low-Frequency Magnetic Noise
Daniel Endean, Chad, T. Weigelt, Randall H. Victora, E. Dan, Dahlberg
“ MP PR 1 Sustainable Poly(lactide-b-butadiene) Multiblock Copolymers with Enhanced Mechanical Properties
Tessie Panthani, Intaek Lee, Frank S. Bates
“ OEI PR Improving Organic Photovoltaic Device Efficiency Through a Tunnel Interface Engineering
Feilong Liu Paul Ruden
4:10 PM CPF PR 1 Poster Introductions Robert Lade, Weihua Li, Chen-yu Liu, Yan Wu, Wanlu Zhang
“ NMP PR 1 Zeolite Adsorbents and Catalysts for Sugar Conversions Nafiseh Rajabbeigi, Michael Tsapatsis
4:20 PM BB WS Engineering More Stable Enzymes Romas Kazlauskas
“ MP PR 1 Nanofibers From Melt Blown Fiber-In-Fiber Polymer Blends Zaifei Wang, Feng Zuo, Dawud H. Tan, Soondeuk Jeung, Chris W. Macosko, Frank S. Bates
Rooms BB: Keller 3-115
BPM: Keller 3-125
CPF: Keller 3-180
MH: Keller 2-260
MP: Keller Hall 3-210
NMP: Mech Eng 18
OEI: Keller Hall 3-111
Industrial Partnership for Research in Interfacial and Materials Engineering 2013 Annual Meeting
- 60 -
PRESENTATIONS BY TIME
THUR, MAY 30
WS = Workshop PR = Program Review
8:20 AM MP PR 2 Stabilization of Cocontinuous Polymer Blends Via Interfacial Localization of Nanoclays
Aaron Hedegaard, Milana Trifkovic, Chris Macosko
8:25 AM NMP PR 2 Characterization of an Early-Stage Membrane Fusion Intermediate of Sindbis Virus using Cryo-electron Microscopy
Sheng Cao, Wei Zhang
8:30 AM BB PR New Applications for Enzymes Larry Wackett
8:40 AM CPF PR 2 Gravure printing: Liquid transfer from cells and grooves Diego Campana, Marcio Carvalho
“ MP PR 2 Investigating the Order-Disorder Transition in Simulations of Diblock Copolymer Melts
Pavani Medapuram, David Morse
8:45 AM NMP PR 2 The Role of Microscopy in Self-Assembly: Emulsion Processing and Drug Delivery
Hanseung Lee, Chris Frethem, Eric Morrison, Qiao Zhang, Jing Han, Chris Macosko, Alon McCormick
9:00 AM BB PR Use of Metagenomic Approaches to Understand and Capitalize on Microbial Diversity
Michael Sadowsky
“ MP PR 2 Thermoplastic Polyurethanes from Bio-Based Poly(δ-Decalactone) Diols
Donglin Tang, Marc Hillmyer, Chris Macosko
“ CPF PR 2 Electrostatically Assisted Deformation of a Liquid Meniscus Near a Cavity
Aruna Ramkrishnan, Satish Kumar
9:05 AM NMP PR 2 Oil Spill Dispersants: Mechanisms of Action and Alternative Applications
David Riehm, Alon McCormick
4:20 PM
OEI PR
PRESENTATIONS BY TIME, WED, MAY 29
Connecting Molecular Structure and Exciton Diffusion Length in Rubrene Derivatives
Tyler Mullenbach, Kathryn McGarry, Wade Luhman, Chris Douglas, Russell Holmes
4:30 PM NMP PR 1 Zeolite Membranes for CO2 Capture Bahman Elyassi, Z. Zhang, Michael Tsapatsis
Rooms
BB: Keller Hall 3-115
CPF: Keller Hall 3-180
MP: Keller Hall 3-210
NMP: Mech Eng 18
Industrial Partnership for Research in Interfacial and Materials Engineering 2013 Annual Meeting
- 61 -
9:20 AM
CPF PR 2
PRESENTATIONS BY TIME
THUR, MAY 30
WS = Workshop PR = Program Review
Improving Resolution for Roll-to-Roll Printed Electronics
Heng Zhang, Alexander Ramm, Sooman Lim, Wieslaw Suzynski, C. Daniel Frisbie, Lorraine F Francis
“ MP PR 2 Effect of Processing and Tacticity on Tg of PMMA/Graphene Nano-Composites
Shigeru Aoyama* Ken-Hsuan Liao, Chris Macosko
9:25 AM NMP PR 2 Metal Salts for Enhanced Gas Absorption Heath Himstedt, Alon McCormick, Edward Cussler
9:30 AM BB PR Enzymatic Protein Labeling Using Prenyltransferases Jonathan Dozier, Mark Distefano
10:20 AM CPF PR 2 Characterization of Stress Development in Particulate Coatings Kyle Price, Alon McCormick, Lorraine Francis
10:20 AM MP PR 2 Thermoset Materials from Sugar Derived Dilactones James Gallagher, Theresa Reineke, Marc Hillmyer
10:30 AM BB PR Thin-Film Enzyme Technologies for Bioanalysis Ping Wang
10:40 AM CPF PR 2 Slot Coating of Non-Colloidal Particle Suspension Simone Araujo, Luis Diego Silva, Diego Campana, Marcio Carvalho
“ MP PR 2 Precise Monomeric Control of Multicomponent Random Copolymers: Excipient Design for Oral Drug Delivery
Jeffrey M. Ting, Tushar S. Navale, Frank S. Bates, Theresa Reineke
“ NMP PR 2 Nanoscale Characterization of Polymer-Inorganic Nanocomposites by AFM
Greg Haugstad, Bill Coggio* Jake Warner
11:00 AM BB PR Biosynthetic Innovations for Sustainable Polymers Mingyong Xiong , Kechun Zhang
“ CPF PR 2 Analysis of the Binder Distribution in Electrode During Drying Hideki Hagiwara* Lorraine F. Francis
“ MP PR 2 Block Vs. Statistical Copolymers for Gene Delivery Dustin Sprouse, Theresa Reineke
*Industrial Fellow
Rooms
BB: Keller Hall 3-115
CPF: Keller Hall 3-180
MP: Keller Hall 3-210
NMP: Mech Eng 18
Industrial Partnership for Research in Interfacial and Materials Engineering 2013 Annual Meeting
- 62 -
11:00 AM
NMP PR 2
PRESENTATIONS BY TIME
THUR, MAY 30
WS = Workshop PR = Program Review
AFM and Tribological Investigations of UV-Crosslinked Coatings
Greg Haugstad, Maggie Zeng* Alon McCormick
11:20 AM CPF PR 2 Forced Spreading and Evaporation of Films and Droplets of Colloidal Suspensions
Leonardo Espin, Satish Kumar
MP PR 2 Trehalose-Based Copolymers for Non-Viral Gene Delivery Zachary Tolstyka, Theresa. Reineke
11:30 AM BB PR PGenetic Improvement of Yeast strains for Cellulosic Ethanol Production
Pedro Pena, Steven Glasker, John Hundertmark, Jared Cohen, Friedrich Srienc
*Industrial Fellow
Rooms
BB: Keller Hall 3-115
CPF: Keller Hall 3-180
MP: Keller Hall 3-210
NMP: Mech Eng 18
Industrial Partnership for Research in Interfacial and Materials Engineering 2013 Annual Meeting
- 63 -
INDUSTRIAL FELLOWS PROGRAM
The goal of the Industrial Fellows Program is to bring industrial and university
scientists and engineers together in collaborative interaction for an extended
period. This program structure provides the opportunity to formulate and
implement long-term, non-proprietary research projects of mutual interest and
encourages the exchange of new insights, ideas, and knowledge. Companies with
IPrime Sponsor-level membership may send one Fellow per year as part of their
membership fees. Affiliate-level companies may send Fellows for an additional
fee.
While in residence at the University, a designated employee works closely with
IPrime researchers on an open, pre-defined research project of mutual interest. To
encourage Industrial Fellows and IPrime faculty to have a true interactive research
experience, the program allows for a flexible schedule, and the residency period
ranges from 10 days to one year. However, to ensure meaningful collaboration, the
10 days should be scheduled within a year.
HOW TO BECOME AN INDUSTRIAL FELLOW The prospective fellow works with the IPrime faculty member who will be directly
associated with the project to develop a one- to two-page proposal describing the
nature of the research and the estimated amount of time to be spent in residence.
The fellow, faculty member and appropriate IPrime Program Leader sign this
proposal and forward it to the Partnership Director for final approval. For further
information contact Bob Lewis, [email protected], ph: 612-625-1269.
IPrime Partners the University of Minnesota and Industry
Company Name Research Faculty
Asahi Kasei Ryo Horiuchi Multi-layer coating fundamentals Kumar Carvalho
Boston Scientific Maggie Zeng Impact of polymer crosslinking on particulate profile of a hydrophilic coating used in a medical device
McCormick Haugstad
Cabot Bill Coggio AFM investigations of coatings and polymer-particles systems Haugstad
CooperVision Rachel Marullo Morphological and rheological characterization of silicone hydrogel contact lenses
Macosko
Corning, Inc. Brandon Williamson Investigation of “shrinkback” in extruded polymeric materials focusing on amorphous regions
Macosko
Dai Nippon Printing Tomohiko Anazawa Evaluation method of functional interlayer between two liquid layers
Kumar
Donaldson Company Joe Block & Brad Hauser Cyro-SEM for organic solvents Haugstad
General Mills Steve Anderson Multilayer die property optimization Macosko
Nitto Denko Kei Yoshida Numerical simulation of phase separation Morse
Panasonic Toshihide Horii Study of ultra thin coating method Kumar Carvalho
Toray Shigeru Aoyama Interface characterization of composite material Macosko Haugstad
Total (Bostik) Miao Hu Physical profiles of hot melt adhesives in the coating applications Lodge
Toyota Hideki Hagiwara Visualization, analysis and optimization of paste and film during battery electrode fabrication Francis
Upsher-Smith Sam Reinhold Quantitation of coating efficiency for multiparticulate systems Sun
Valspar Keith Kirkwood Improved industrial spray coating and final film coalescence Kumar Francis
IPrime Industrial Fellows 2013
IPRIME ANNUAL MEETING SCHEDULE MAY 28 – 30, 2013
May 28 Tuesday Afternoon CPF MP NMP REM Special Events Workshop 1 Workshop 1 Workshop Program Poster Session 1 Keller 3-180 Keller 3-210 Mech Eng 18 Keller 3-115 McNamara Alumni Ctr
Memorial Hall
1:30 – 5:20p 1:30 – 5:20p 1:30 – 5:20p 1:30 – 5:20p 5:45 – 7:00p
May 29 Wednesday Morning
BPM CPF MP OEI Special Events Workshop Workshop 2
Workshop 2
Workshop Plenary Session & Luncheon
Keller 3-125 Keller 3-180
Keller 3-210 Keller 3-111 McNamara Alumni Ctr Johnson Great Room
8:30 – 11:40a 9:00 – 11:40a 8:30 – 11:40a 8:30 – 11:40a 11:45a – 1:05p
May 29 Wednesday Afternoon BB BPM CPF MH MP NMP OEI Special Events
Workshop Program Program 1 Program Program 1 Program 1 Program Faculty-Industry Meet & Greet McNamara, Johnson Rm, 5–5:45p Keller 3-115 Keller 3-125 Keller 3-180 Keller 2-260 Keller 3-210 Mech Eng 18 Keller 3-111
Poster Session 2 + Awards
McNamara, Memorial, 5:45–7:30p 1:15 – 5:00p 1:15 – 5:00p 1:15 – 5:00p 1:15 – 5:00p 1:15 – 5:00p 1:15 – 5:00p 1:15 – 5:00p Characterization Facility Demos
12 Shepherd Labs, 7 – 8:30p
May 30 Thursday Morning / Afternoon BB CPF MP NMP Special Events
Program Program 2 Program 2 Program 2 PPB Breakfast Meeting, 7–8:15a Keller 3-115
Keller 3-180
Keller 3-210 Mech Eng 18 Commons Hotel, Think 5 Room
BB, BPM, CPF, MP, NMP TAC Meetings, 12 – 1:45p 8:20 – 11:40a 8:20 – 11:40a 8:20 – 11:40a 8:20 – 11:40a (5) Coffman Union, 4th Floor
PPB Board Meeting, 2 – 3:30p Coffman Union, President’s Room