Upload
vuongthuan
View
216
Download
2
Embed Size (px)
Citation preview
iPOLiS mobile is a smartphone application that enables you to control a SAMSUNG Network Camera, Encoder or DVR remotely.
The user manual is prepared for use with the iPhone.
Before reading the manual, download iPOLiS mobile from the App Store and install it on your smartphone.
Enter a case-insensitive keyword such as "iPOLiS", "SAMSUNG", and "TECHWIN" for your search.
When upgrading iPOLiS mobile viewer of version 2.0 from version 1.0 you need to re-register devices that were listed to the existing version.
This application is optimized for iOS 4.3.5, 5.0.1.
Recommended Smartphone : iPhone 3GS / 4
Recommended Tablet PC : iPad 2
iPOLiS mobile
English iOS ver 2.0
2
To add a device
3G (HSDPA) data communications may charge you with excessive fees and can cause a delay or loss in data communications. So we recommend you to use the Wi-Fi communications.
Check the recommended settings below:
• Recommended settings of a network camera:
- If using 3G communications : 4fps @ 320x240
- If using Wi-Fi communications : 8fps @ 320x240
J Depending on the communication environment, the accessible number of users to the network camera can be limited.
• Recommended settings of DVR:
- If using 3G communications : 320x240, Quality (low)
- If using Wi-Fi communications : 320x240, Quality (low)
The bandwidth of DVR should be set to less than 800Kbps. (The audio may not be supported if the bandwidth is set to less than 200Kbps)
The network connection may be unstable or disconnected depending on the Wi-Fi / 3G network conditions.
When using the audio menu, it is recommended to adjust the volume to less than medium.
M The resolution settings in DVR will be applied commonly to CMS, mobile Viewer and Web Viewer.
1. Adding a Device
2
3
To register a device
When you launch the application for the first time, you will see the <Add Device> confirmation message.
1. From the start screen of iPOLiS mobile, tap <OK>.The Add Device screen appears.If the device is already registered, you will see the device list instead.
2. Provide necessary information for the device that you want to connect.
• Name : Enter the device title or create a new one.
• : You can view the descriptive help on each item.
• Model : Select a device to be connected. When the device is registered successfully, detailed model name will be filled in automatically.
• Host : Enter the IP address or host name (registered with DDNS) of the external device according to your Internet connection environment.
• HTTP Port : Enter the connection port for the external device.
4
• RTSP Port : Enter the RTSP port specified in the device. For DVR, you must use the last port number of the set range in the device.
If the port range of the DVR device is between 4520 and 4524, enter 4524.
• ID : Provide the device ID that you have specified.
• Password : Provide the password for the device that you have specified.
• Profile : Appears if selected cameras other than the DVR, choose profile for the selected camera whose video will be displayed on the phone’s screen.
For a network camera to register, the profile is set to <Profile 10> by default.
Select a DVR product for the device to add, and press Save. When it is successfully registered, the "CAMERA" window appears.Select a camera channel to play on the phone's screen.
3. Provide necessary information and tap <Save>.When done, your settings will be displayed in the device list.
5
To edit the device information
1. Select a device to edit from the list.
2. Tap < > to the right of the device to edit.
3. When you have completed your changes, tap <Save>.
To delete a device
1. Select a device to edit from the list.
2. Tap < > to the right of the device to edit.
3. When you have completed your changes, tap <Delete Device>.The selected device will be removed from the list.
2. To edit and delete a device
6
1. Launch iPOLiS mobile. When the device list appears, tap the device name to connect. Video from the selected DVR or camera will be played.
M If selecting a DVR model, you will be prompted to forcibly disconnect from the previous device and connect to a network viewer (if connected) in a different form such as CMS or Web Viewer.
3. To connect to a device
To change the channel
1. If you had set the camera connection mode to <All> when registering the DVR device, you will see a 4-split screen by default.
2. Tap < >.The camera list appears.
3. Select a channel to display on the screen.If you select channel 7, channel 5 through 8 will be displayed on the screen.
4. You can switch to the next split mode by dragging the screen from right to left.
When connection for each and every channel is completed, try to switch to the next split mode.
4. To change the channel for the connected DVR
CAM 01 CAM 02
CAM 03 CAM 04
1.91 fps 1.91 fps
1.91 fps 1.91 fps1 91 fps 1 91 fps1 91 fps s1.91 fps 1.91 fpsp 991 f s 1.91 f1.91 f pp 99 s911911
CAM 01 CAM 02SRD 1/4
CAM 04
ps 1.91 fps
CAM 01
CAM 02
CAM 03
CAM 04
CAM 05
CAM 05
Device List
7
To switch to Single screen mode
1. Tap and hold a channel screen to switch in 4-split mode, or slightly tap it twice.
M If you tap the single mode screen, the Pan/Tilt operation will be performed.
In Wi-Fi network environment, you can listen to the audio signal if selecting the Single Screen mode.
2. To switch the channel in Single screen mode, tap < > and select a desired camera channel.
M Only registered cameras will be displayed in the list.
CAM 01 CAM 01 CASRD 1/4
CAM 01
CAM 02
CAM 03
CAM 04
CAM 05
CAM 05
Back
8
To control the PTZ operations
You can control the PTZ operations of the camera that is registered remotely.
1. Tap the default single video screen.You will see a list of menu items available in Live mode.
2. Use the navigation bar to control the connected device remotely.You can drag and drop the default screen manually to perform the zoom in/out or pan/tilt operation and adjust the focus.
J As long as the menu buttons are floating, you cannot drag and drop the image for the zoom in/out or pan/tilt operation.
The focus adjustment is available only for a SRD-Series model.
3. Tap the screen again to return to the default video screen.
5. Live
CAM 01 CAM 01CACAM 01SRD-CAM 01 1/4Back
Focus
Adjust the focus of the camera.
Zoom In/Out
Enlarge or collapse the image.
Pan/Tilt
Tap and hold any of the direction buttons to pan and tilt the camera
continuously in the specified direction.
Each time you tap a direction button, the
connected camera will be panned or tilted step by step in the specified
direction.
9
To check the device information
You can check the configuration information of a registered device.
1. In the bottom of the Connect Device screen, tap < >.
2. To change the device settings, you should make a change manually for each setting item.
To display the image in reverse
Display the live video by flipping or turning upside down (rotation by 180 degrees).
1. From the main screen, tap to display the context menu and select < >.
2. Tap it again to restore the default image.
CAM 01 CAM 01CASRD-CAM 01 1/4
Bitrate Control : CBR
Codec : H.264
Resolution : 352X288
Frame rate : -
Bitrate : -
Quality : Normal
Back
CAM 01 CAM 01CASRD-CAM 01 1/4Back
10
To capture the screen
You can capture the current image to the smart phone as an image file format.
1. From the live video menu, tap < >.
2. The current image will be saved to the image folder of the smart phone as an image file format.
1. From the upper main screen, tap < >.You will see a list of searchable devices on the screen.
2. Select and tap a device to search.You will see a list of searchable channels on the screen.
6. Search
11
3. Tap a channel to display a calendar where the cursor will be positioned to the current date.The dates containing available data will be highlighted as shown.Use < > in the left/right corner of the calendar to move to the next or previous month.
4. If you tap a date that you want to search, the circular timeline will be displayed on the screen.The areas containing searchable data will be highlighted in color.
The duplicate check list will appear if there are found duplicates in the same timeline.
12
1. Tap any area on the screen.
2. To stop playing the video temporarily, tap <�> .To resume playing, tap <+> .
3. To adjust the play speed, use <)> .The play speed will switch to: X1 > X2 > X4 > X8 > X1 in sequence.
7. Playback
5. Tap <Start Time> to display the time settings window. Specify the start time.
6. Tap <Play> to play the video for up to 10 minutes.
CAM 01 CAM 01 CASRD 1/4
x1
00:00:04
Back
13
1. During playback, tap <★>.
2. When the "Add to bookmark list" dialog appears, type in the bookmark name.
3. If you want to play a bookmarked data item, tap < > from the upper main screen to display the bookmark list.
4. Select a bookmarked item to play.
8. Bookmark
CAM 01 CAM 01CASRD 1/4
x1
00:00:04
SRDSSSRDSRDSRDSRDSRDDDDDDDDDDDDDDDDDDDDDDDDDDSRDSRDSRDSRDRDSRDRDSRDSRDSRDDSRDSRDDSRDSRDSRDSRDSRDSRDSRDSRDSRDSRDSRSRDSRDSRSRDSRDSRDSRDSRDSRSRDSRDSRDDRDRDSRDSRSRDSRDSRDSRSRDSRDRSRDRDSRDSSRDSRDSRDSRDSRDRSRDRDSRDSSRDDSRDSRSSRSRDRDDSRSRDSRDSSRRRDDRRDDSSRRDDD
xxxxxxxxxx11111
00:0000:00000:000:000:000:000:00000000 000:00000000 0000000000:0000:000:04:0400404:04:040404:04:04:004:04040404040:0404040404:044004040:040:04044044:040404:04:
Back
14
You can specify the use of the password for launching iPOLiS mobile or check the information of iPOLiS mobile.
To set the password
1. From the start screen of iPOLiS mobile, tap < >.
2. Slide the bar next to <Set Password> to the right, and select < >.
3. Enter a new password.
4. To cancel the password setting, slide the right bar to the left and select < >.
5. If you enter the currently registered password, the password setting will be canceled.
9. iPOLiS mobile Setup
15
To change the password
1. Tab <Change Password> in setup screen, then enter the new password.
To configure the Intro settings
1. From the Intro tab, you can configure the "Intro Tab" that will be displayed on the screen when running iPOLiS mobile for the first time.
2. If you have set <Live>, you will see the live device list at the first start; if you have set <Search>, the list of searchable devices will be displayed at the first start.
To see the help
1. From the Setup screen of iPOLiS mobile, tap <Help>.
2. The PDF version of the user manual of iPOLiS mobile will be provided.
To check the iPOLiS mobile information
1. From the iPOLiS mobile setup screen, tap <About iPOLiS mobile>.
2. You can check the information of the current version of iPOLiS mobile.
J This application uses FFmpeg format complies with LGPL v2.1
16
Device Model Firmware version
N/W Camera
Box/Dome
SNB-5000, SND-5080/5080F, SNV-5080, SNV-3120, SNV-5010
v2.10 or Higher
SNB-7000, SNV-7080, SND-7080/F v1.20 or Higher
SNO-5080R, SNV-5080R v2.10 or Higher
SNO-7080R, SNV-7080R v1.20 or Higher
SNB-1001, SND-1080, SND-1011, SNV-1080, SNO-1080R, SNV-1080R
v1.00 or Higher
SNB-3002, SND-3082/3082F, SNV-3082
v1.00 or higher
PTZ
SNP-3120/3120V/3120VH v1.25 or higher
SNP-5200/H, SNZ-5200(Zoom only) v1.05 or higher
SNP-3302/H, SNP-3371/H/TH v1.01 or higher
SNP-6200/H v1.00 or Higher
Encoder
SPE-400/100 v1.04 or Higher
SPE-1600R v1.04 or Higher
SPE-101 v1.04 or Higher
DVR
Live & Playback
SRD-1670DC/1650DC/870DC/850DC SRD-1670(D)/870(D)/470(D) SRD-1650(D)/850(D) SRD-1630(D)1610(D)/830(D) SRD-1671/1651/871/851/471
v1.08 or higher
SRD-1652D/852D v1.08 or higher
SRD-1650DU v1.08 or higher
Live only
SRD-440 v1.08 or higher
SDE-5001/5002/4001/4002/3001/3003SDE-3004/4004
v1.08 or higher
10. Supported Models