IP66 Ingress Protected - MK Electric Catalogue... · 2015. 6. 22. · The enclosure has 4 x 20mm entries, 1 on top, bottom and each side and is supplied with an earth terminal and

www.mkelectric.co.uk p1

Masterseal Plus™

IP66 Ingress Protected

Thrives in the Toughest Conditions.

HOW TO SPECIFY

A range of water and dust tight enclosures, rated at IP66 when in use, manufactured from UV stable thermoplastic material and utilising a gel gasket seal and easy to open catch mechanism.

To enable quick and easy installation the seal will be fixed to the mounting frame of the unit.

Containing a urea moulded anti-bacterial range of wiring accessories, designed with soft curves and chamfered top edges that offer a slim unobtrusive appearance.

Cable connections must be upward facing with easy to identify white markings on a dark background, grouped in a straight line with captive terminal screws for ease of installation.

All standard BS sockets to have a 3 pin operated “child Resistant” shutter system and double pole switching, with the contacts designed such that the neutral makes before and breaks after the live pole for improved safety.

All products to be made in the UK.

www.mkelectric.co.ukp2

MK Electric has always been at the forefront of technical innovation, not least in the IP environment.

Masterseal Plus™ has been tested to levels well in excess of British Standards. Masterseal Plus™ safeguards users in the harshest of environments, employing a gel seal for improved protection.

With a superb rating of IP66, Masterseal Plus™ is dust-tight to any ingress, and water-tight against high-pressure water jets from any direction.

MASTERSEAL PLUS – IP66 RATED

ULTIMATE PROTECTIONFor the Great Brtitish Weather

MASTERSEAL PLUS™

RANGE INTRODUCTION

Masterseal Plus™ has been specifically developed for use in both outdoor and indoor environments, and where wiring devices and accessories would be at risk from penetration by dust or water.

With a rating of IP66*, Masterseal Plus™ offers total protection against dust, and is protected against high pressure jets of water from any direction. Masterseal Plus™ sockets can seal around virtually any standard 13A plug – including moulded plugs – allowing safe connection for any appliance.

An improved catch eases the opening and closing of the lid, whilst ensuring the integrity of the seal. The gasket is fixed to the mounting frame of the product, enabling rapid installation, and removing the risk of error when placing a floating gasket.

The Masterseal Plus™ range extends to over 90 product variations as the enclosures house selected products from the Logic Plus portfolio – thus offering all the benefits of the Logic Plus™ range within the Masterseal Plus™ enclosures.

FEATURES & BENEFITS

IP66*Masterseal Plus™ offers total dust ingress protection, and is protected against high-pressure water jets from any direction, when in use.

ROBUST CONSTRUCTION AND TEMPERATURE TOLERANTMasterseal Plus™ will not discolour, crack or fade in UV light (unlike many other plastics), and will maintain operation in extremes of heat and cold.

IMPACT PROTECTIONMasterseal Plus™ enclosures are made from polycarbonate, one of the toughest thermoplastics available – incidentally also used in products such as motorcycle helmets.

WIDEST RANGE

The Masterseal Plus™ range extends to over 90 product variants. The enclosures house products from the Logic Plus™ range, all enclosures and switches are available in Grey, White and Black.

20 YEAR GUARANTEEMasterseal Plus™ is guaranteed for an industry-leading 20 years. (10 years for electronic products)


*Grid Plus enclosures are IP56

CEL

EBR

ATIN

G

100

MIL

LIO

NSO

CKE

TS

CELEBRATING

100 MILLIONSOCKETS

*Grid Plus enclosures are IP56


Masterseal Plus™ IP66

SOLID PROTECTION LIQUID PROTECTION

Dust Tight: No ingress of dust.Complete protection against contact.

Powerful water jets: Water projected in powerful jets against the enclosure from any direction shall have no harmful effects.

Masterseal PlusINGRESS PROTECTED – IP66

Masterseal Plus™ is perfectly suited to a range of indoor and outdoor environments. Typical installations include factories, swimming pools, laboratories, commercial kitchens, industrial units, warehouses, and cleanrooms.

The wide portfolio of products extends to over 90 product variants providing a solution for every application, ensuring wiring devices and accessories are protected in the toughest conditions.

IP66Protection against any particles of dust and powerful water jets

SEALED IN USE WITH VIRTUALLY ANY STANDARD 13A PLUGincluding moulded on plugs

FIXED GASKET SPEEDS INSTALLATIONand removes risk of error when placing a floating gasket

IMPROVED CATCHEases opening and closing

AVAILABLE IN GREY, WHITE AND BLACK

NOW HAS ALL THE FEATURES AND BENEFITS OF THE LOGIC PLUS RANGE

REAR DRILL HOLESFor easier installation

MANUFACTURED FROM POLYCARBONATEFor impact protection

GEL SEALDurable water and dust tight seal for improved protection


IP Solutions

To view the video visit the MK Electric by Honeywell YouTube channel

Masterseal Plus™

CEL

EBR

ATIN

G

100

MIL

LIO

NSO

CKE

TS

CELEBRATING

100 MILLIONSOCKETS

K56486GRY 1K56486WHI 1K56486BLK 113A DP 1 GANG SWITCHEDK56482GRY 1K56482WHI 1K56482BLK 113A DP 2 GANG SWITCHEDK56488GRY 1K56488WHI 1K56488BLK 113A DP SWITCHED 2 GANG NEON CLEAR COVER

Fixing holes are for No.8 woodscrews (not supplied).K56486 has 4 x 20mm entries, 1 on top, bottom and each side and is supplied with an earth terminal in the back box.2 gang backbox has 5 cable entries, 2 on top and 1 centrally on other 3 sides. Supplied with earth terminals in backbox.DIMENSIONS1 gang 157 x 110 x 89mm 2 gang 157 x 175 x 89mmBS 1363-2:1995IP66 BS EN 60529:1992

K56301GRY 1K56301WHI 1K56301BLK 11 GANG DP 30mA RATED TRIPPING CURRENT ACTIVE CONTROL CIRCUITK56231GRY 1K56231WHI 1K56231BLK 12 GANG SP 30mA RATED TRIPPING CURRENT ACTIVE CONTROL CIRCUITK56233GRY 1K56233WHI 1K56233BLK 12 GANG SP30mA RATED TRIPPING CURRENT PASSIVE CONTROL CIRCUIT

RCD protected sockets are pulsating d.c. and a.c. fault current sensitive.Fixing holes are for No.8 woodscrews (not supplied).Supplied with an earth terminal in the back box. The Sentrysocket has 5 entries. Suitable for supply voltage of 240V a.c. 50HzStandard Shutters.DIMENSIONS157 x 175 x 89mmBS 7288:1990IP66 BS EN 60529:1992

K56480GRY 1K56480WHI 1K56480BLK 113A 1 GANG UNSWITCHEDK56481GRY 1K56481WHI 1K56481BLK 113A 2 GANG UNSWITCHED

Fixing holes are for No.8 woodscrews (not supplied).K56480 has 4 x 20mm entries, 1 on top, bottom and each side and is supplied with an earth terminal in the back box.BS 1363-2:1995IP66 BS EN 60529:1992K56481 Backbox has 5 cable entries, 2 on top and 1 centrally on other 3 sides. Supplied with earth terminals in backbox.DIMENSIONS1 gang 157 x 110 x 89mm 2 gang 157 x 175 x 89mmBS 1363-2: 1995IP66 BS EN 60529:1992

K56485GRY 1K56485WHI 1K56485BLK 113A SP 1 GANG WITH ELECTRONIC TIMER MODULEK56487GRY 1K56487WHI 1K56487BLK 113A 1 GANG DP KEY OPERATED SOCKET

Timer Module meets the requirements of IEC 60730-1 and IEC 60730-2-7 Standards

K56483GRY 1K56483WHI 1K56483BLK 116A 1 GANG 2P+E UNSWITCHED(NON UK)

Fixing holes are for No.8 woodscrews (not supplied).K56483 is for use with plugs having right angled cable exit. DIMENSIONS157 x 110 x 89mmIEC 60884-1:2006IP66 BS EN 60529:1992

13 AMP IP66

Switchsocket Outlets,Timer Socket Outlets, and Key Operated Socket Outlets 13 AMP IP66

K56486GRY

K56231BLK K56481WHI

K56301GRY K56480GRY

K56482BLK

K56485GRY

K56487GRY

RCD PROTECTED 13 AMP IP66

Socket Outlets

K56488GRY

K56485WHI

K56233WHI

16 AMP IP66

Masterseal enclosures are manufactured from

polycarbonate. This provides an extremely high level of impact

resistance. However some chemicals and synthetic oils can

harm polycarbonate. Refer to Technical Hotline

for assistance +44 (0) 1268 563720

K56483WHI

K56483BLK

K56483GRY

K56481BLK


MASTERSEAL PLUS

K56410GRY 1K56410WHI 1K56410BLK 113A DP 1 GANG SWITCHED, FUSED

Fitted with a 13A fuse link to BS 1362.Fixing holes are for No.8 woodscrews (not supplied).Backbox has 4 x 20mm entries, 1 on each edge, and is supplied with an earth terminal in the backbox.DIMENSIONS160 x 117 x 89mmBS 1363-4:1995IP66 BS EN 60529:1992

K56400GRY 1K56400WHI 1K56400BLK 110A 1 GANG SP ONE-WAY K56401GRY 1K56401WHI 1K56401BLK 110A 1 GANG SP TWO-WAYK56402GRY 1K56402WHI 1K56402BLK 110A 2 GANG SP ONE-WAY

Fixing holes are for No.8 woodscrews (not supplied).Each switch is fitted with a neon which can be wired as a locator.The enclosure has 4 x 20mm entries, 1 on top, bottom and each side and is supplied with an earth terminal and a loop terminal in the back box.These switches (except push switches) do NOT have to be derated when used with fluorescent or inductive loads.DIMENSIONS95 x 95 x 57mmBS EN 60669-1:1999IP66 to BS EN 60529:1992

K56406GRY 1K56406WHI 1K56406BLK 110A 1 GANG DP ONE-WAYK56407GRY 1K56407WHI 1K56407BLK 110A 1 GANG SP TWO-WAY PUSH TO MAKE OR PUSH TO BREAK ‘BELL’K56408GRY 1K56408WHI 1K56408BLK 110A 1 GANG SP TWO-WAY PUSH TO MAKE OR PUSH TO BREAK ‘PRESS’

K56425GRY 1K56425WHI 1K56425BLK 120A 1 GANG DP KEY OPERATED SWITCH

Fixing holes are for No.8 woodscrews (not supplied).K56425 Backbox has 4 x 20mm entries, 1 on top, bottom and each side and is supplied with an earth terminal in the back box.DIMENSIONS160 x 117 x 89mmBS EN 60669-1:1999IP66 BS EN 60529:1992

K56409GRY 1K56409WHI 1K56409BLK 120A 1 GANG DP ONE-WAY ‘PRESS’

Fixing holes are for No.8 woodscrews (not supplied).Each switch is fitted with a neon which can be wired as a locator.The enclosure has 4 x 20mm entries, 1 on top, bottom and each side and is supplied with an earth terminal and a loop terminal in the back box.DIMENSIONS95 x 95 x 57mmBS EN 60669-1:1999IP66 to BS EN 60529:1992

K56414GRY 1K56414WHI 1K56414BLK 1MODULAR GRID PLUS ENCLOSURE SUPPLIED WITH 1 AND 2 GANG INSERTS*

Fixing holes are for No.8 woodscrews (not supplied). Backbox has 4 x 20mm entries, 1 on top, bottom and each side. Supplied with an earth terminal and a loop terminal in the backbox.DIMENSIONS95 x 95 x 80mmBS EN 60669-1:1999IP56 to BS EN 60529:1992

Connection Units

13 AMPIP66

Switches

10 AMPIP66

10 AMPIP66

K56410WHI

K56410BLK

K56400GRY

K56402BLK

K56406GRY

K56401WHI

Key Operated Switches

20 AMP IP66

K56425GRY

K56410GRY

K56407BLK

K56408WHI

20 AMPIP66

K56409GRY

K56409WHI

K56409BLK

K56414WHI

K56414BLK

K56414GRY

Grid PlusEnclosures

IP56

K56425WHI

K56425BLK

* NOTE: Installers may select any switch or

neon modules, excluding dimmers, from Grid Plus

range and configure product to suit installation

requirements.


K5820WHI 5K5820BLK 5TELEPHONE MASTER ONE MODULE K5821WHI 5K5821BLK 5TELEPHONE SECONDARY ONE MODULE

DIMENSIONS25 x 50mmBS 6312-2

K56420GRY 1K56420WHI 1K56420BLK 11 GANG FOR USE WITH ANY ONE SWITCH MODULEK56421GRY 1K56421WHI 1K56421BLK 11 GANG WITH NEON FOR USE WITH ANY SWITCH AND ANY NEON MODULEK56422GRY 1K56422WHI 1K56422BLK 12 GANG FOR USE WITH ANY TWO SWITCH MODULES

Fixing holes are for No.8 woodscrews (not supplied).Each enclosure is fitted with a neon which should be wired as a locator. The enclosure has 4 x 20mm entries, 1 on top, bottom and each side and is supplied with an earth terminal and a loop terminal in the back box.NOTEThese enclosures are for use with the Masterseal Plus™ switch and neon modules.DIMENSIONS95 x 95 x 57mmIP66 to BS EN 60529:1992

56881BLK 1010A SP ONE-WAY56882BLK 1010A SP TWO-WAY56883BLK 1010A DP ONE-WAY

For use only with Masterseal Plus™ switch enclosures.These switches do NOT have to be derated when used with fluorescent or inductive loads.BS EN 60669-1:1999

56891BLK 1020A SP ONE-WAY56892BLK 1020A SP TWO-WAY56893BLK 1020A INTERMEDIATE56896BLK 1020A DP ONE-WAY

For use only with Masterseal Plus™ switch enclosures.These switches do NOT have to be derated when used with fluorescent or inductive loads.BS EN 60669-1:1999

K56423GRY 1K56423WHI 1K56423BLK 11 GANG DATA ENCLOSURE FOR 2 MODULE EURO OUTLET HALF MODULE BLANKS SOLD SEPARATELY

2 data modules can be accommodated providing care is used to ensure that the cables are correctly routed through the outlet.Fixing holes are for No.8 woodscrews (not supplied). Backbox has 4 x 20mm entries, 1 on each edge. Supplied with an earth terminal and a loop terminal in the backbox.DIMENSIONS160 x 117 x 89mmIP66 to BS EN 60529:1992

56889RED 10200-250V NEON RED

BS 5733: 2010

For the full range of euro modules

see the MK Catalogue

SwitchEnclosures

IP66

Switch Modules

10 AMP 20 AMP

56892BLK 56893BLK

56891BLK

56896BLK

56881BLK

56883BLK

56882BLK

K56421WHI

K56420GRY

K56422BLK

K56422GRY

K56423WHI

K56423BLK

K56423GRY

Data/Telecom Enclosures Euro Format

IP66

NeonModules

56889RED

Euro Data Modules

TELECOM

K5820WHI K5820BLK

K5821WHI K5821BLK


MASTERSEAL PLUS

MK9933 1M20 EARTH LEAD ADAPTOR FOR EARTHING METAL CONDUIT56890GRN 5REPLACEMENT NEON LOCATOR

K56506GRY 1K56506WHI 1K56506BLK 1JUNCTION BOX WITH FOUR 4-WAY TERMINALS

Fixing holes are for No. 8 woodscrews (not supplied).The enclosure has 4 entries, 1 on top, bottom and both sides. TERMINAL CAPACITYEach terminal block accepts four 2.5mm2 cables.DIMENSIONS95 x 95 x 65mmBS 6220:1983IP66 to BS EN 60529

K56500GRY 1K56500WHI 11 GANG PLASTER/TILE FLUSH MOUNTING FRAME WITH PROTECTIVE COVERFOR USE WITH 160 X 117MM PRODUCTS 56500GRY 156500WHI 11 GANG PLASTER/TILE FLUSH MOUNTING FRAME WITH PROTECTIVE COVERFOR USE WITH 95 X 95MM SWITCHESK56501GRY 1K56501WHI 12 GANG PLASTER/TILE FLUSH MOUNTING FRAME WITH PROTECTIVE COVER

The Flush adaptors for plaster and tile can be used with finish depths up to 20mm, by using the spacers provided.Allows flush mounted Masterseal Plus™ products to maintain their IP rating. Can be used with side entry or back entry enclosures. DIMENSIONS56500 115 x 115 x 34mm K56500 135 X 135 X 34mm K56501 135 X 195 X 34mm

K56502GRY 1K56502WHI 11 GANG FLUSH MOUNTING BEZELFOR USE WITH 160 X 117MM PRODUCTS56502GRY 156502WHI 11 GANG FLUSH MOUNTING BEZEL FOR USE WITH 95 X 95MM SWITCHESK56503GRY 1K56503WHI 12 GANG FLUSH MOUNTING BEZEL

The Flush adaptors for brick and cavity walls should be used on vertical surfaces where no additional finishing, such as plastering is required. Allows flush mounted Masterseal Plus™ products to maintain their IP rating. Can only be used with back entry enclosures.Supplied with 4 self tapping screws to fix enclosure to mounting bezel.Clip-on surround hides mounting screws.DIMENSIONS56502 145 x 145 x 41mm K56502 165 x 165 x 41mm K56503 165 x 245 x 41mm

56460GRY 556460WHI 5ENTRY BLANK56461BLK 556461WHI 5PVC CABLE ENTRY TO PROVIDE DIRECT ENTRY OF POWER CABLE TO THE UNIT VIA THE BOTTOM BOX ENTRY56462BLK 556462WHI 520MM PLAIN CONDUIT ENTRY PUSH FIT ADAPTOR BETWEEN BACK BOX AND 20MM PLAIN CONDUIT56463BLK 556463WHI 520MM THREADED CONDUIT ENTRY PUSH FIT ADAPTOR BETWEEN BACK BOX AND 20MM THREADED CONDUIT56464BLK 556464WHI 5BOX COUPLERFOR GANGING ONEMASTERSEAL PLUS™

BOX NEXT TO ANOTHER

K5844WHI 5RJ45 CAT 5e ANGLED UNSCREENED ONE MODULEK5887WHI 5K5887BLK 5RJ11/12 ONE MODULE

K5844Enhanced Cat 5e performance. Suitable for both 568A and 568B wiring schemes.

ISO/IEC 11801 EN 50173 TIA 568 EN 41003

K5887Suitable for both RJ11 and RJ12 jacks RJ11 4 wire RJ12 6 wire

FCC68 EN 41003

DIMENSIONS25 x 50mm

Accessories

56890GRN

MK9933

DATA

K5844WHI

K5887WHI

Junction Boxes

30 AMP IP66

K56506GRY

K56506WHI(COVER OFF)

Flush Mounting Frames

Flush Mounting Bezels

Conduit Entries

K56502GRYK56500GRY

56500WHI 56502WHI

56461WHI

56462WHI

56463WHI

56464WHI

56460WHI

K56506WHI (COVER ON)

K56501GRY K56503GRY

K5887BLK

Euro Data Modules


1 and 2 Channel TransmitterFor Echo™

Enclosure

K55400GRY 1K55400WHI 1K55400BLK 11 CHANNEL TRANSMITTERFOR ECHO™

K55406GRY 1K55406WHI 1K55406BLK 12 CHANNEL TRANSMITTER FOR ECHO™

K55400GRY

K55406WHI

K55000GRY

K55000GRY 1K55000WHI 1K55000BLK 1

No wiresl Instant switch installationl Location/relocation flexibilityl Simplifies office ‘churn’ – less disruption

No batteriesl Low maintentancel Low running costsl Less waste, a more sustainable optionl No nuisance factor

Flexibilityl No wires, no constraintsl Suitable for all wall types, including where

channelling isn’t feasiblel Ideal for commercial, residential and

historic buildings

Quality reliability and safety come as standard10 year guarantee

Echo™ is an innovative range of entirely wireless, batteryless and self-powered switches, only available from MK Electric

WIRELESSNo wires offers the benefits of almost instant switch installation and total location flexibility, resulting in reduced costs and disruption as well as improved speed and ease of installation – invaluable for areas needing to rearrange space periodically, e.g. commercial offices, or those where the channelling of walls isn’t permittable or feasible, such as historic buildings or glass partition walls.

BATTERYLESSNo batteries means low maintenance and low running costs. No need to buy, fit, replace or dispose of batteries, eliminating nuisance and waste for a more sustainable option.

SELF-POWEREDThe new Echo™ range works by harvesting tiny amounts of ambient energy which power a switch (Transmitter) to send an RF signal to the Switch Receiver which is connected to the lighting circuit – operating lighting at ranges of up to 30 metres within typical buildings.

K55406BLK

IP66 IP66

Accessories

REMOTE CONTROL TRANSMITTER

K5417R 1

OPERATING FREQUENCY:868.3 MhzIP RATINGIP2 x DDIMENSIONS50 x 82 x 21mmETSI EN 301 489-1 + -3 : ESTI EN 300 220-3

K5420R 110AX SWITCH RECEIVER/REPEATER

OPERATING FREQUENCY868.3MhzIP RATINGIP2 x DDIMENSIONS175.5 x 50.3 x 32.25mmBS EN 60669-1 : BS EN 60669-2-1 : ETSI EN 301 489-1 + -3 : ESTI EN 300 220-3

ALTERNATIVERECEIVER

WIRELESS

BATTERYLESS

SELF-POWERED


MASTERSEAL PLUS

1 Channel Switch Receivers

K5432R 11 CHANNEL MULTI-FUNCTION SWITCH RECEIVER

Multi-functional device with repeater functionality providing: single button, stairwell, time-delay, fan, scene operating modes and interlock functions for use with window contact.

SUPPLY230V / 50HzLOAD RATINGSGLS/Incandescent: 2500W Halogen: 1200W Inductive: 600VAELECTRONIC BALLASTS3 unitsOPERATING FREQUENCY868.3MHzDIMENSIONSDepth: 27mmBS EN 60669-2-1 BS EN 301489-1/3 BS EN 300220-1/2

K5431R 11 CHANNEL VOLT-FREE, MULTI-FUNCTION SWITCH RECEIVER


SUPPLY230V / 50HzLOAD RATINGSGLS/Incandescent:1200W @ 230Vac 50W @ 30Vdc Halogen: 600W @ 230VacOPERATING FREQUENCY868.3MHzDIMENSIONS: Depth: 27mmBS EN 60669-2-1 BS EN 301489-1/3 BS EN 300220-1/2

K5437R 11 CHANNEL MULTI-FUNCTIONAL SWITCH RECEIVER LEADED


SUPPLY230V / 50HzLOAD RATINGSGLS/Incandescent: 2500WHalogen: 1200W Inductive: 600VAELECTRONIC BALLASTS3 unitsOPERATING FREQUENCY868.3MHzDIMENSIONSDepth: 27mmBS EN 60669-2-1 BS EN 301489-1/3 BS EN 300220-1/2

K5433R 12 CHANNEL MULTI-FUNCTION SWITCH RECEIVER


SUPPLY 230V / 50HzLOAD RATINGS(per channel) GLS / incandescent: 500WHalogen: 100W Inductive: 100VA Electronic Ballasts: 1 unitOPERATING FREQUENCY868.3MHzDIMENSIONS Depth: 27mmBS EN 60669-2-1 BS EN 301489-1/3 BS EN 300220-1/2

2 ChannelSwitchReceivers

K5436R 11 CHANNEL MULTI-FUNCTIONAL DIMMER RECEIVER LEADED

Multi-functional device providing: soft start, turn-on memory, switch, stairwell and scene operating modes.

SUPPLY 230V / 50HzLOAD RATINGS 60-210WSuitable for use with GLS/Incandescent/Halogen lamps and 12V low voltage lighting powered by dimmable electronic transformers only.OPERATING FREQUENCY868.3MHzDIMENSIONS Depth: 27mm BS EN 60669-2-1 BS EN 301489-1/3 BS EN 300220-1/2

1 Channel Dimmer Receiver

Receivers

MOUNTING SWITCH TRANSMITTERS: All can be mounted directly to the wall surface – screws supplied. All can be mounted to back boxes – screws supplied.


Reference UKMK408-0615-ENJune 2015© 2015 Honeywell International Inc.

MK Electric

UK

The Arnold Centre, Paycocke Road, Basildon,

Essex, SS14 3EA, United Kingdom

Customer Service Tel +44 (0)1268 563404

Customer Service Fax +44 (0)1268 563405

E-mail [email protected]

Technical

Tech Helpline Tel +44 (0)1268 563720

Tech E-mail [email protected]

Ireland

Sales Telephone +353 1 429 6530

Sales Fax +353 1 429 6501

E-mail [email protected]

www.mkelectric.co.uk

Download the new App from Honeywell.

4App Store Marketing and Advertising Guidelines for Developers March 2012

Available on the

Available on theThe App Store badge must be used in both marketing and advertising communications, such as TV spots, print ads, video trailers, email, newsletters, and websites, whenever you promote your app offered on the App Store. Only the badge shown here is approved by Apple.

For online communications, you must provide a link to your app on the App Store wherever the App Store badge is used. To obtain the URL for your app on the App Store, go to your product page in iTunes. Right-click or Control-click your app listing and choose Copy URL. Embed the URL in the App Store badge or your marketing copy.

Customers will be directed to install iTunes software if needed, then routed to their original destination on the App Store.

Localized badgesApple provides badge artwork with the “Available on the” modifier translated into 11 languages (listed below). Do not create your own version of a localized badge. Always use artwork provided by Apple.

App Store Badge

Minimum clear space and minimum size• Minimum clear space is equal to one-quarter the

height of the badge. • Do not place photos, typography, or other graphic

elements inside the minimum clear space. • Minimum size is 10 mm for use in printed materials

and 40 pixels for use onscreen. • Always select a size that is clearly legible but not

dominant.

BackgroundsThe Available on the App Store badge always appears in black and white as shown here. The white border surrounding the badge is part of the badge artwork and must be included. The App Store badge can be placed on:

• A black or white background• A solid-color background• A background image as long as legibility is not

diminished

Available on the

Available on the

Basics

Available on theX

40 px

X

X

X

X

X12 px

X

X

X

XApp Store

The App Store badge is available in these languages: Chinese Simplified, Chinese Traditional, Dutch, English, French, German, Italian, Japanese, Portuguese, Russian, and Spanish.

To view the video visit the MK Electric by Honeywell YouTube channel

Masterseal Plus™

Documents

IP66 Ingress Protected - MK Electric Catalogue... · 2015. 6. 22. · The enclosure has 4 x 20mm entries, 1 on top, bottom and each side and is supplied with an earth terminal and