Upload
others
View
6
Download
0
Embed Size (px)
Citation preview
©2020 Atkore International, Inc. All rights reserved.
IP4X and IP54 Trunking
IP4XIPX4 is an IP code, or Ingress Protection Marking. This is a classification standard which rates the degree of protection against intrusion. The 4 means the system is protected against objects larger than 1mm.
The Flytec system is unique in that the IP4X sleeve can be fitted quickly and easily with a 'snap on' connection. This also allows for the sleeve to be fitted retrospectively after installation of the other components.
The Flytec IP4X systems are independently tested to IEC 60529:3013.
IP4X systems BS7671 IET IP4X compliant.
For more info visit atkore.com/unistrut
PHONE: 01793 611 777EMAIL: [email protected]
©2020 Atkore International, Inc. All rights reserved.
For more info visit atkore.com/unistrut
Gasketed Trunking for External Use
• All sizes shown in our single andmulti compartment sections can bemanufactured to prevent ingress ofdust and liquids
• The system is designed with anoutward returned flange on the bodywith an overlapping lid, which is fittedwith a neoprene gasket on both sidesalong its entire length. When installedthe gasket is compressed betweenbody and lid by screws which fixinto captive bushes on the outwardflanges
• Designed and manufactured to meetIP54
• A complete range of accessories, fullygasketed, is available
1. Neoprene Gasket2.Trunking Lid3.Connector Strap4.Internal Connector5.Trunking Body