IOMEGA_0_00

Vivid i/q & Vivid S5/S6 Iomega UltraMax Desktop Hard Drive Installation ManualFor BT11 and later systems

Part Number: 5401302-100DOC ID: 0804692

Revision 1

GE Healthcare

Operating Documentation

This page is intentionall left blank

GE HEALTHCAREDIRECTION 5401302-100, REVISION 1 IOMEGA ULTRAMAX DESKTOP HARD DRIVE INSTALLATION MANUAL

- i

Important Precautions

THIS SERVICE MANUAL IS AVAILABLE IN ENGLISH ONLY. IF A CUSTOMERS SERVICE PROVIDER REQUIRES A LANGUAGE OTHER

THAN ENGLISH, IT IS THE CUSTOMERS RESPONSIBILITY TO PROVIDE TRANSLATION SERVICES.

DO NOT ATTEMPT TO SERVICE THE EQUIPMENT UNLESS THIS SERVICE MANUAL HAS BEEN CONSULTED AND IS UNDERSTOOD.

FAILURE TO HEED THIS WARNING MAY RESULT IN INJURY TO THE SERVICE PROVIDER, OPERATOR OR PATIENT FROM ELECTRIC SHOCK, MECHANICAL OR OTHER HAZARDS.

CE MANUEL DE MAINTENANCE NEST DISPONIBLE QUEN ANGLAIS. SI LE TECHNICIEN DU CLIENT A BESOIN DE CE MANUEL DANS UNE AUTRE

LANGUE QUE LANGLAIS, CEST AU CLIENT QUIL INCOMBE DE LE FAIRE TRADUIRE.

NE PAS TENTER DINTERVENTION SUR LES QUIPEMENTS TANT QUE LE MANUEL SERVICE NA PAS T CONSULT ET COMPRIS.

LE NON-RESPECT DE CET AVERTISSEMENT PEUT ENTRANER CHEZ LE TECHNICIEN, LOPRATEUR OU LE PATIENT DES BLESSURES DUES DES DANGERS LECTRIQUES, MCANIQUES OU AUTRES.

DIESES KUNDENDIENST-HANDBUCH EXISTIERT NUR IN ENGLISCHER SPRACHE.

FALLS EIN FREMDER KUNDENDIENST EINE ANDERE SPRACHE BENTIGT, IST ES AUFGABE DES KUNDEN FR EINE ENTSPRECHENDE BERSETZUNG ZU SORGEN.

VERSUCHEN SIE NICHT, DAS GERT ZU REPARIEREN, BEVOR DIESES KUNDENDIENST-HANDBUCH NICHT ZU RATE GEZOGEN UND VERSTANDEN WURDE.

WIRD DIESE WARNUNG NICHT BEACHTET, SO KANN ES ZU VERLETZUNGEN DES KUNDENDIENSTTECHNIKERS, DES BEDIENERS ODER DES PATIENTEN DURCH ELEKTRISCHE SCHLGE, MECHANISCHE ODER SONSTIGE GEFAHREN KOMMEN.

WARNING(EN)

AVERTISSEMENT(FR)

WARNUNG(DE)

GE HEALTHCAREDIRECTION 5401302-100, REVISION 1 IOMEGA ULTRAMAX DESKTOP HARD DRIVE INSTALLATION

ii -

ESTE MANUAL DE SERVICIO SLO EXISTE EN INGLS. SI ALGN PROVEEDOR DE SERVICIOS AJENO A GEHC SOLICITA UN IDIOMA

QUE NO SEA EL INGLS, ES RESPONSABILIDAD DEL CLIENTE OFRECER UN SERVICIO DE TRADUCCIN.

NO SE DEBER DAR SERVICIO TCNICO AL EQUIPO, SIN HABER CONSULTADO Y COMPRENDIDO ESTE MANUAL DE SERVICIO.

LA NO OBSERVANCIA DEL PRESENTE AVISO PUEDE DAR LUGAR A QUE EL PROVEEDOR DE SERVICIOS, EL OPERADOR O EL PACIENTE SUFRAN LESIONES PROVOCADAS POR CAUSAS ELCTRICAS, MECNICAS O DE OTRA NATURALEZA.

ESTE MANUAL DE ASSISTNCIA TCNICA S SE ENCONTRA DISPONVEL EM INGLS.

SE QUALQUER OUTRO SERVIO DE ASSISTNCIA TCNICA, QUE NO A GEHC, SOLICITAR ESTES MANUAIS NOUTRO IDIOMA, DA RESPONSABILIDADE DO CLIENTE FORNECER OS SERVIOS DE TRADUO.

NO TENTE REPARAR O EQUIPAMENTO SEM TER CONSULTADO E COMPREENDIDO ESTE MANUAL DE ASSISTNCIA TCNICA.

O NO CUMPRIMENTO DESTE AVISO PODE POR EM PERIGO A SEGURANA DO TCNICO, OPERADOR OU PACIENTE DEVIDO A CHOQUES ELTRICOS, MECNICOS OU OUTROS.

IL PRESENTE MANUALE DI MANUTENZIONE DISPONIBILE SOLTANTO IN INGLESE.

SE UN ADDETTO ALLA MANUTENZIONE ESTERNO ALLA GEHC RICHIEDE IL MANUALE IN UNA LINGUA DIVERSA, IL CLIENTE TENUTO A PROVVEDERE DIRETTAMENTE ALLA TRADUZIONE.

SI PROCEDA ALLA MANUTENZIONE DELLAPPARECCHIATURA SOLO DOPO AVER CONSULTATO IL PRESENTE MANUALE ED AVERNE COMPRESO IL CONTENUTO.

NON TENERE CONTO DELLA PRESENTE AVVERTENZA POTREBBE FAR COMPIERE OPERAZIONI DA CUI DERIVINO LESIONI ALLADDETTO ALLA MANUTENZIONE, ALLUTILIZZATORE ED AL PAZIENTE PER FOLGORAZIONE ELETTRICA, PER URTI MECCANICI OD ALTRI RISCHI.

KESOLEV TEENINDUSJUHEND ON SAADAVAL AINULT INGLISE KEELES. KUI KLIENDITEENINDUSE OSUTAJA NUAB JUHENDIT INGLISE KEELEST

ERINEVAS KEELES, VASTUTAB KLIENT TLKETEENUSE OSUTAMISE EEST. RGE RITAGE SEADMEID TEENINDADA ENNE EELNEVALT KESOLEVA

TEENINDUSJUHENDIGA TUTVUMIST JA SELLEST ARU SAAMIST. KESOLEVA HOIATUSE EIRAMINE VIB PHJUSTADA TEENUSEOSUTAJA,

OPERAATORI VI PATSIENDI VIGASTAMIST ELEKTRILGI, MEHAANILISE VI MUU OHU TAGAJRJEL.

AVISO(ES)

ATENO(PT)

AVVERTENZA (IT)

HOIATUS (ET)


- iii

TM HUOLTO-OHJE ON SAATAVILLA VAIN ENGLANNIKSI. JOS ASIAKKAAN PALVELUNTARJOAJA VAATII MUUTA KUIN

ENGLANNINKIELIST MATERIAALIA, TARVITTAVAN KNNKSEN HANKKIMINEN ON ASIAKKAAN VASTUULLA.

L YRIT KORJATA LAITTEISTOA ENNEN KUIN OLET VARMASTI LUKENUT JA YMMRTNYT TMN HUOLTO-OHJEEN.

MIKLI TT VAROITUSTA EI NOUDATETA, SEURAUKSENA VOI OLLA PALVELUNTARJOAJAN, LAITTEISTON KYTTJN TAI POTILAAN VAHINGOITTUMINEN SHKISKUN, MEKAANISEN VIAN TAI MUUN VAARATILANTEEN VUOKSI.

. , .

.

, , , .

EZEN KARBANTARTSI KZIKNYV KIZRLAG ANGOL NYELVEN RHET EL.

HA A VEV SZOLGLTATJA ANGOLTL ELTR NYELVRE TART IGNYT, AKKOR A VEV FELELSSGE A FORDTS ELKSZTTETSE.

NE PRBLJA ELKEZDENI HASZNLNI A BERENDEZST, AMG A KARBANTARTSI KZIKNYVBEN LERTAKAT NEM RTELMEZTK.

EZEN FIGYELMEZTETS FIGYELMEN KVL HAGYSA A SZOLGLTAT, MKDTET VAGY A BETEG RAMTS, MECHANIKAI VAGY EGYB VESZLYHELYZET MIATTI SRLST EREDMNYEZHETI.

ESSI JNUSTUHANDBK ER EINGNGU FANLEG ENSKU. EF JNUSTUAILI VISKIPTAMANNS ARFNAST ANNARS TUNGUMLS EN

ENSKU, ER A BYRG VISKIPTAMANNS A TVEGA INGU. REYNI EKKI A JNUSTA TKI NEMA EFTIR A HAFA SKOA OG

SKILI ESSA JNUSTUHANDBK. EF EKKI ER FARI A ESSARI VIVRUN GETUR A VALDI MEISLUM

JNUSTUVEITANDA, STJRNANDA EA SJKLINGS VEGNA RAFLOSTS, VLRNNAR EA ANNARRAR HTTU.

VAROITUS (FI)

(EL)

FIGYELMEZTETS (HU)

VIVRUN(IS)


iv -

TENTO SERVISN NVOD EXISTUJE POUZE V ANGLICKM JAZYCE. V PPAD, E POSKYTOVATEL SLUEB ZKAZNKM POTEBUJE NVOD

V JINM JAZYCE, JE ZAJITN PEKLADU DO ODPOVDAJCHO JAZYKA KOLEM ZKAZNKA.

NEPROVDJTE DRBU TOHOTO ZAZEN, ANI BYSTE SI PEETLI TENTO SERVISN NVOD A POCHOPILI JEHO OBSAH.

V PPAD NEDODROVN TTO VSTRAHY ME DOJT RAZU ELEKTRICKM PROUDEM PRACOVNKA POSKYTOVATELE SLUEB, OBSLUNHO PERSONLU NEBO PACIENT VLIVEM ELEKTRICKHOP PROUDU, RESPEKTIVE VLIVEM K RIZIKU MECHANICKHO POKOZEN NEBO JINMU RIZIKU.

DENNE SERVICEMANUAL FINDES KUN P ENGELSK. HVIS EN KUNDES TEKNIKER HAR BRUG FOR ET ANDET SPROG END

ENGELSK, ER DET KUNDENS ANSVAR AT SRGE FOR OVERSTTELSE. FORSG IKKE AT SERVICERE UDSTYRET MEDMINDRE

DENNE SERVICEMANUAL ER BLEVET LST OG FORSTET. MANGLENDE OVERHOLDELSE AF DENNE ADVARSEL KAN MEDFRE SKADE

P GRUND AF ELEKTRISK, MEKANISK ELLER ANDEN FARE FOR TEKNIKEREN, OPERATREN ELLER PATIENTEN.

DEZE ONDERHOUDSHANDLEIDING IS ENKEL IN HET ENGELS VERKRIJGBAAR.

ALS HET ONDERHOUDSPERSONEEL EEN ANDERE TAAL VEREIST, DAN IS DE KLANT VERANTWOORDELIJK VOOR DE VERTALING ERVAN.

PROBEER DE APPARATUUR NIET TE ONDERHOUDEN VOORDAT DEZE ONDERHOUDSHANDLEIDING WERD GERAADPLEEGD EN BEGREPEN IS.

INDIEN DEZE WAARSCHUWING NIET WORDT OPGEVOLGD, ZOU HET ONDERHOUDSPERSONEEL, DE OPERATOR OF EEN PATINT GEWOND KUNNEN RAKEN ALS GEVOLG VAN EEN ELEKTRISCHE SCHOK, MECHANISCHE OF ANDERE GEVAREN.

APKALPES ROKASGRMATA IR PIEEJAMA TIKAI ANGU VALOD. JA KLIENTA APKALPES SNIEDZJAM NEPIECIEAMA INFORMCIJA CIT

VALOD, NEVIS ANGU, KLIENTA PIENKUMS IR NODROINT TULKOANU. NEVEICIET APRKOJUMA APKALPI BEZ APKALPES ROKASGRMATAS

IZLASANAS UN SAPRAANAS. BRDINJUMA NEIEVROANA VAR RADT ELEKTRISKS STRVAS

TRIECIENA, MEHNISKU VAI CITU RISKU IZRAISTU TRAUMU APKALPES SNIEDZJAM, OPERATORAM VAI PACIENTAM.

VSTRAHA(CS)

ADVARSEL(DA)

WAARSCHUWING(NL)

BRDINJUMS(LV)


- v

IS EKSPLOATAVIMO VADOVAS YRA ILEISTAS TIK ANGL KALBA. JEI KLIENTO PASLAUG TEIKJUI REIKIA VADOVO KITA KALBA NE ANGL,

VERTIMU PASIRPINTI TURI KLIENTAS. NEMGINKITE ATLIKTI RANGOS TECHNINS PRIEIROS DARB, NEBENT

VADOVAUTUMTS IUO EKSPLOATAVIMO VADOVU IR J SUPRASTUMTE NEPAISANT IO PERSPJIMO, PASLAUG TEIKJAS, OPERATORIUS AR

PACIENTAS GALI BTI SUEISTAS DL ELEKTROS SMGIO, MECHANINI AR KIT PAVOJ.

DENNE SERVICEHNDBOKEN FINNES BARE P ENGELSK. HVIS KUNDENS SERVICELEVERANDR TRENGER ET ANNET SPRK, ER DET

KUNDENS ANSVAR SRGE FOR OVERSETTELSE. IKKE FORSK REPARERE UTSTYRET UTEN AT DENNE

SERVICEHNDBOKEN ER LEST OG FORSTTT. MANGLENDE HENSYN TIL DENNE ADVARSELEN KAN FRE TIL AT

SERVICELEVERANDREN, OPERATREN ELLER PASIENTEN SKADES P GRUNN AV ELEKTRISK STT, MEKANISKE ELLER ANDRE FARER.

NINIEJSZY PODRCZNIK SERWISOWY DOSTPNY JEST JEDYNIE W JZYKU ANGIELSKIM.

JELI FIRMA WIADCZCA KLIENTOWI USUGI SERWISOWE WYMAGA UDOSTPNIENIA PODRCZNIKA W JZYKU INNYM NI ANGIELSKI, OBOWIZEK ZAPEWNIENIA STOSOWNEGO TUMACZENIA SPOCZYWA NA KLIENCIE.

NIE PRBOWA SERWISOWA NINIEJSZEGO SPRZTU BEZ UPRZEDNIEGO ZAPOZNANIA SI Z PODRCZNIKIEM SERWISOWYM.

NIEZASTOSOWANIE SI DO TEGO OSTRZEENIA MOE GROZI OBRAENIAMI CIAA SERWISANTA, OPERATORA LUB PACJENTA W WYNIKU PORAENIA PRDEM, URAZU MECHANICZNEGO LUB INNEGO RODZAJU ZAGROE.

ACEST MANUAL DE SERVICE ESTE DISPONIBIL NUMAI N LIMBA ENGLEZ. DAC UN FURNIZOR DE SERVICII PENTRU CLIENI NECESIT O ALT LIMB

DECT CEA ENGLEZ, ESTE DE DATORIA CLIENTULUI S FURNIZEZE O TRADUCERE.

NU NCERCAI S REPARAI ECHIPAMENTUL DECT ULTERIOR CONSULTRII I NELEGERII ACESTUI MANUAL DE SERVICE.

IGNORAREA ACESTUI AVERTISMENT AR PUTEA DUCE LA RNIREA DEPANATORULUI, OPERATORULUI SAU PACIENTULUI N URMA PERICOLELOR DE ELECTROCUTARE, MECANICE SAU DE ALT NATUR.

SPJIMAS(LT)

ADVARSEL(NO)

OSTRZEENIE(PL)

ATENIE(RO)


vi -

.

, .

.

, , , .

TTO SERVISN PRRUKA JE K DISPOZCII LEN V ANGLITINE. AK ZKAZNKOV POSKYTOVATE SLUIEB VYADUJE IN JAZYK AKO

ANGLITINU, POSKYTNUTIE PREKLADATESKCH SLUIEB JE ZODPOVEDNOSOU ZKAZNKA.

NEPOKAJTE SA VYKONVA SERVIS ZARIADENIA SKR, AKO SI NEPRETATE SERVISN PRRUKU A NEPOROZUMIETE JEJ.

ZANEDBANIE TOHTO UPOZORNENIA ME VYSTI DO ZRANENIA POSKYTOVATEA SLUIEB, OBSLUHUJCEJ OSOBY ALEBO PACIENTA ELEKTRICKM PRDOM, PRPADNE DO MECHANICKHO ALEBO INHO NEBEZPEENSTVA.

DEN HR SERVICEHANDBOKEN FINNS BARA TILLGNGLIG P ENGELSKA. OM EN KUNDS SERVICETEKNIKER HAR BEHOV AV ETT ANNAT SPRK N

ENGELSKA ANSVARAR KUNDEN FR ATT TILLHANDAHLLA VERSTTNINGSTJNSTER.

FRSK INTE UTFRA SERVICE P UTRUSTNINGEN OM DU INTE HAR LST OCH FRSTR DEN HR SERVICEHANDBOKEN.

OM DU INTE TAR HNSYN TILL DEN HR VARNINGEN KAN DET RESULTERA I SKADOR P SERVICETEKNIKERN, OPERATREN ELLER PATIENTEN TILL FLJD AV ELEKTRISKA STTAR, MEKANISKA FAROR ELLER ANDRA FAROR.

BU SERVS KILAVUZU YALNIZCA NGLZCE OLARAK SALANMITIR. EER MTER TEKNSYEN KILAVUZUN NGLZCE DIINDAK BR DLDE

OLMASINI STERSE, KILAVUZU TERCME ETTRMEK MTERNN SORUMLULUUNDADIR.

SERVS KILAVUZUNU OKUYUP ANLAMADAN EKPMANLARA MDAHALE ETMEYNZ.

BU UYARININ GZ ARDI EDLMES, ELEKTRK ARPMASI YA DA MEKANK VEYA DER TRDEN KAZALAR SONUCUNDA TEKNSYENN, OPERATRN YA DA HASTANIN YARALANMASINA YOL AABLR.

!(RU)

UPOZORNENIE(SK)

VARNING(SV)

DKKAT(TR)


- vii

(JA)

(ZH-CN)

(KO)


viii -

DAMAGE IN TRANSPORTATIONAll packages should be closely examined at time of delivery. If damage is apparent write Damage In Shipment on ALL copies of the freight or express bill BEFORE delivery is accepted or signed for by a GE representative or hospital receiving agent. Whether noted or concealed, damage MUST be reported to the carrier immediately upon discovery, or in any event, within 14 days after receipt, and the contents and containers held for inspection by the carrier. A transportation company will not pay a claim for damage if an inspection is not requested within this 14 day period.

CERTIFIED ELECTRICAL CONTRACTOR STATEMENT - FOR USA ONLYAll electrical Installations that are preliminary to positioning of the equipment at the site prepared for the equipment shall be performed by licensed electrical contractors. Other connections between pieces of electrical equipment, calibrations and testing shall be performed by qualified GE Healthcare personnel. In performing all electrical work on these products, GE will use its own specially trained field engineers. All of GEs electrical work on these products will comply with the requirements of the applicable electrical codes.

The purchaser of GE equipment shall only utilize qualified personnel (i.e., GEs field engineers, personnel of third-party service companies with equivalent training, or licensed electricians) to perform electrical servicing on the equipment.

OMISSIONS & ERRORSIf there are any omissions, errors or suggestions for improving this documentation, please contact the GE Healthcare Global Documentation Group with specific information listing the system type, manual title, part number, revision number, page number and suggestion details. Mail the information to: Service Documentation, 9900 Innovation Drive (RP-2123), Wauwatosa, WI 53226, USA.

GE Healthcare employees should use the iTrak System to report all documentation errors or omissions.

SERVICE SAFETY CONSIDERATIONS

For a complete review of all safety requirements, see Chapter 1, Safety Considerations section, in the Service Manual.

DANGER DANGEROUS VOLTAGES, CAPABLE OF CAUSING DEATH, ARE PRESENT IN THIS EQUIPMENT. USE EXTREME CAUTION WHEN HANDLING, TESTING AND ADJUSTING.

WARNINGWARNING Use all Personal Protection Equipment (PPE) such as gloves, safety shoes, safety glasses, and kneeling pad, to reduce the risk of injury.


- ix

LEGAL NOTES

The contents of this publication may not be copied or duplicated in any form, in whole or in part, without prior written permission of GE Healthcare.

GE Healthcare may revise this publication from time to time without written notice.

TRADEMARKSAll products and their name brands are trademarks of their respective holders.

COPYRIGHTSAll Material Copyright 2010 by General Electric Company Inc. All Rights Reserved.


x -

Revision History

List of Page Changes

Revision Date Reason for change1 27th September 2010 Initial release

Pages Revision Pages Revision Pages Revision

GE HEALTHCAREDIRECTION 5401302-100, REVISION 1 VIVID I/Q & VIVID S5/S6 IOMEGA ULTRAMAX DESKTOP HARD DRIVE INSTALLATION MANUAL

Table of Contents xi

Table of ContentsCHAPTER 1Installation

Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 1

Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 1Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 1Contents in kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 2Prerequisite . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 2Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 2

Environmental Dangers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 3Patient Vicinity UL60601-1 replaces UL 2601-1(USA) . . . . . . . . . . . . . . . . 1 - 3Patient Environment IEC60601-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 4

Installation and Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 5Connecting the Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 5Volume Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 6Switch ON the Disk Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 7Status lights on front of unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 7Security cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 8Change volume name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 8

CHAPTER 2Disk Drive Complete Replacement Procedure

Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 1

Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 1

Switch off power on the Iomega UltraMax desktop hard drive . . . . . . . . . . . . . . . . 2 - 1

Disconnect the Iomega UltraMax desktop hard drive. . . . . . . . . . . . . . . . . . . . . . . 2 - 2

Install a replacement Iomega UltraMax desktop hard drive . . . . . . . . . . . . . . . . . . 2 - 3

GE H EALTHCAREDIRECTION 5401302-100, REVISION 1 VIVID I/Q & VIVID S5/S6 IOMEGA ULTRAMAX DESKTOP HARD DRIVE INSTALLATION MANUAL

xii -

CHAPTER 3Damaged Disk Replacement Procedure

Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 - 1

Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 - 1

Replacement Part . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 - 1

Switch off power on the Iomega UltraMax desktop hard drive. . . . . . . . . . . . . . . . .3 - 1

Disconnect the Iomega UltraMax Desktop Hard Drive . . . . . . . . . . . . . . . . . . . . . .3 - 2

Outer Casing Removal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 - 3

Defect disk removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 - 4Preparations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 - 4Remove the upper hard disk drive (HDD) . . . . . . . . . . . . . . . . . . . . . . . . . .3 - 4Remove the lower hard disk drive (HDD) . . . . . . . . . . . . . . . . . . . . . . . . . . .3 - 4

New hard disk drive (HDD) installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 - 5

CHAPTER 4Disk Management

Disk Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 - 1


Chapter 1 - Installation 1 - 1

Chapter 1Installation

Section 1-1Contents

1-1 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-11-2 Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-11-3 Environmental Dangers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-31-4 Installation and Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5

Section 1-2Introduction

1-2-1 OverviewThe Iomega UltraMax desktop hard drive is an external desktop hard drive, connected via aUSB/eSATA port to the USB port on either a Vivid i/q or a Vivid S5/S6 workstation. It is configured as RAID 1, so the content is mirrored on two hard disk drives.

When using the Vivid i/q system, patient safety considerations require that the Iomega UltraMax desktop hard drive be connected to the system using the SafeLock cart. The installation must be placed outside the Patient Vicinity/Patient Environment (see below).

The intended use for Iomega UltraMax desktop hard drive is for Disk Management.

NOTE: When Disk Management has been performed, it is recommended to back up the Patient Archive to a medical grade DVD recordable disc.

NOTE: Only connect one USB storage device (like this Iomega UltraMax Desktop Hard Drive) to the Vivid i/q or a Vivid S5/S6 system at a time.

WARNINGWARNING If the Iomega UltraMax desktop hard drive is connected to a Vivid i/q or a Vivid S5/S6, ensure that it is placed outside the Patient Vicinity/Patient Environment, see: Section 1-3 "Environmental Dangers" on page 1-3 for details.


1 - 2 -

1-2-2 Contents in kit

1-2-3 Prerequisite Laptop or PC with USB, used for setup of Volume name (Disk name) on the new drive. Vivid i/q and Vivid S5/S6: Application software version 0, 11.0.0 Build 11

1-2-4 WarrantyThis unit comes with a one year warranty.

NOTE: If an issue occurs with the Iomega drive during the warranty period, use your local Iomega service representative to resolve it. The warranty period will be terminated If other personnel (including GE) replace a HDD.

See: www.iomega.com to identify your local Iomega service representative.

Table 1-1 The TBD Kit contents

ITEM PART NUMBER DESCRIPTION QTY

1 H45031TJ

USB Harddrive 2TB with RAID1 Norsk Datalagring: NDUR-2T-K, P/N 31787000The following items are included: - USB Harddrive- AC/DC Power converter (100 - 220 VAC, 50/60 Hz)- 3 m AUX power cable- 5 m USB cable- Security Cable

1

2 5401302-100 Iomega UltraMax Desktop Hard Drive Installation manual for Vivid i/q and Vivid S5/S6 systems1



Section 1-3Environmental Dangers

Commercial devices such as laser cameras, printers, VCRs and external monitors, usually exceed allowable leakage current limits and, when plugged into separate AC outlets, are in violation of patient safety standards. Suitable electrical isolation of such external AC outlets, or providing the device with extra protective earth, will be required in order to meet UL60601-1 and IEC60601-1-1 standards for electrical leakage.

1-3-1 Patient Vicinity UL60601-12.12.20 DV - D2 Addition

An area in which patients are normally cared for, the patient vicinity is the space with surfaces likely to be in contact with the patient or attendant who can touch the patient. This encloses a space within the room of 1.83 m (6 ft.) beyond the perimeter of the bed (examination table, dental chair, treatment booth, and the like) in its intended location, and extending vertically 2.29 m (7.5 ft.) above the floor.

WARNINGWARNING ALL DEVICES MEETING IEC60950 MUST BE KEPT OUTSIDE OF THE PATIENT ENVIRONMENT, AS DEFINED IN IEC60601-1-1, UNLESS IT, ACCORDING TO IEC60601-1-1, IS EQUIPPED WITH:A) ADDITIONAL PROTECTIVE EARTHOR B) EXTRA ISOLATING TRANSFORMER


1 - 4 Section 1-3 - Environmental Dangers

1-3-2 Patient Environment IEC60601-1-1Sub clause 2.204

The patient environment is an area in which medical diagnosis, monitoring or treatment is carried out. It is difficult to estimate precise dimensions for the patient environment.

In practice, a distance of 2,5 m (8.2 ft.) above the floor on which the medical personnel stand and a horizontal distance of 1,5 m (4.9 ft.) have justified themselves as indicative of the dimensions of the Patient Environment.

The patient environment is depicted as a dashed line in this procedure. See Figure 1-1 on page 1-4 below.

Figure 1-1 Patient safety information

1,5m 1,5m

Patient environment 2,5m

Patient environment



Section 1-4Installation and Setup

1-4-1 Connecting the Cables1.) Verify that the volume configuration is set to RAID 1 as described in 1-4-2 "Volume Configuration"

on page 1-6.2.) Connect the USB cable to the combined USB/eSATA (Duolink) socket at the rear of the disk unit

and plug the USB connector into the USB port at the rear of the Vivid S5/S6 system. When using the Vivid i/q system, plug the USB connector into the USB port located on the SafeLock cart.

NOTE: Do not use any of the other USB sockets (USB hub) at the rear of the unit.

3.) Connect the cable (see Figure 1-3 on page 1-6) from the power supply to the power connector at the rear of the hard disk unit.

NOTICE When using the Vivid i/q system: The Iomega UltraMax Desktop Hard Drive must be connected via the SafeLock cart.

WARNINGWARNING When using the SafeLock cart and the Vivid i/q system, ensure that the Safelock Cart and the Vivid i/q system is placed outside the Patient Vicinity/Patient Environment, see: Section 1-3 "Environmental Dangers" on page 1-3 for details.

Figure 1-2 HDD disk unit, rear view

DC POWER IN

ON/OFF SWITCH

VOLUME CONFIGURATION(Set to RAID1)

SECURITY LOCK

USB 2.0 (eSATA Duolink) CONNECTOR

NOT SUPPORTED

NOT SUPPORTED


1 - 6 Section 1-4 - Installation and Setup

1-4-2 Volume ConfigurationThe Iomega UltraMax Hard Drive is configured as a mirrored volume (RAID 1). This ensures optimal data integrity and immediate access to the data, even if one disk fails.

Verify that both MODE switches are set to ON as illustrated in Figure 1-4 "RAID 1 setup" on page 1-6.

NOTE: The RAID 1 capacity is half the physical capacity of the two drives.

Figure 1-3 AC/DC power converter

CAUTION Changing the volume configuration will erase all existing data! If the drive has files you want to save, move them to another drive before changing the switch settings.

Figure 1-4 RAID 1 setup



1-4-3 Switch ON the Disk Unit

1.) Connect the 3 m power cord to the Iomega power supply and plug it into the AUX mains power supply outlet on the SafeLock cart at the rear of a Vivid S5/S6 system.

2.) Turn ON the power on the disk unit. The power switch is located at the rear of the unit.3.) Verify that the status lights function as described in 1-4-4 "Status lights on front of unit" on page 1-7.

1-4-4 Status lights on front of unit

WARNINGWARNING When the Iomega UltraMax desktop hard drive is connected to the Vivid i/q or a Vivid S5/S6, ensure that it is placed outside the Patient Vicinity/Patient Environment, see: Section 1-3 "Environmental Dangers" on page 1-3 for details.

Figure 1-5 HDD disk unit, front view

Please see status light legend on the following page.

1

2

3

4

1 HDD1 connection/power indicator - Glows white when the hard disk is connected and the drive is powered up. Blinks when building a mirrored RAID if HDD1 is the target disk.

2 HDD1 status indicator - Indicates the status of the hard disk. See color status indicator below for a description of each status.

3 HDD2 connection/power indicator - Glows white when the hard disk is connected and the drive is powered up. Blinks when building a mirrored RAID with HDD2 as the target disk.

4 HDD2 status indicator - Indicates the status of the hard disk. See the color chart below for a description of each status.


1 - 8 Section 1-4 - Installation and Setup

Status light legend:

Flashing blue - Hard drive is being accessed Solid blue - Array is being rebuilt Red - Disk failure

1-4-5 Security cableInstall the security cable (included with unit) to prevent theft.

1-4-6 Change volume nameImportant The Iomega UltraMax desktop hard drive must have a unique volume name. The site should choose a naming convention to use for marking this Hard Drive and any future hard drives, in case more than one drive is needed in the future.

NOTE: Only connect one USB storage device (like this Iomega UltraMax Desktop Hard Drive) to the Vivid i/q or Vivid S5/S6 at a time.

Follow these steps to set the Volume name:

1.) Connect the USB cable from the Iomega UltraMax desktop hard drive to the scanner.2.) Switch on the Iomega UltraMax desktop hard drive.3.) Verify that the drive appear for selection as described in

Section 4-1 "Disk Management" on page 4-1.4.) From the console, press CONFIG and click CONNECTIVITY.5.) Click the Tools tab and from the Media scrolldown list, select USB Hard Disk.6.) In the Label field, type a unique volume name, click FORMAT and click OK.7.) After a warning notice displays, click OK.

The system processes the information. 8.) At the end of the process, verify that the unique volume name you assigned appears in the Label

field.


Chapter 2 - Disk Drive Complete Replacement Procedure 2 - 1

Chapter 2Disk Drive Complete Replacement Procedure

Section 2-1Contents

2-1 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-12-2 Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-12-3 Switch off power on the Iomega UltraMax desktop hard drive . . . . . . . . . . . . . . . . . . . . 2-12-4 Disconnect the Iomega UltraMax desktop hard drive. . . . . . . . . . . . . . . . . . . . . . . . . . . 2-22-5 Install a replacement Iomega UltraMax desktop hard drive . . . . . . . . . . . . . . . . . . . . . . 2-3

Section 2-2Overview

Follow the procedures in this chapter if the Iomega UltraMax desktop hard drive is filled up with data or broken and needs to be replaced.

NOTE: If only one of the internal hard disk drives (HDD1 or HDD2) is broken, please refer to the instructions in Chapter 3 - "Damaged Disk Replacement Procedure" on page 3-1.

Section 2-3Switch off power on the Iomega UltraMax desktop hard drive

1.) Switch OFF the power to the unit. The power switch is located at the units rear side.2.) Disconnect the power cable from the AUX mains power outlet on the scanner or the SafeLock cart.For more information, see: Figure 1-5 "HDD disk unit, front view" on page 1-7.

NOTICE Ensure that there is no activity on the drive before you turn it off. If power is turned off when files are written to the drive, the files will be corrupted.Do not remove the Iomega UltraMax desktop hard drive or other peripherals from the Vivid systems while the latter are in Standby mode. Systems should be shut down prior to unplugging peripherals.


2 - 2 Section 2-4 - Disconnect the Iomega UltraMax desktop hard drive

Section 2-4Disconnect the Iomega UltraMax desktop hard drive

1.) Disconnect the USB 2.0 cable at the rear of the unit.2.) Disconnect the power cable at rear of the unit.For more information, see: Figure 1-2 "HDD disk unit, rear view" on page 1-5.

3.) Remove the unit:- If the Iomega UltraMax desktop hard drive is filled up with data, store it in a safe place and

label it with the date and that it is filled up. To install a new (replacement) unit, continue with Section 2-5 "Install a replacement Iomega UltraMax desktop hard drive" on page 2-3.

- If only one of the internal hard disk drives (HDD1 or HDD2) is broken, please refer to the instructions in Chapter 3 - "Damaged Disk Replacement Procedure" on page 3-1.

- If both internal hard disk drives (HDD1 and HDD2) are broken, the complete Iomega UltraMax desktop hard drive must be replaced. All stored data is lost. To install a new (replacement) unit, continue with Section 2-5 "Install a replacement Iomega UltraMax desktop hard drive" on page 2-3.

- If the Iomega UltraMax desktop hard drive itself (not the HDD1 and/or HDD2) is broken: the complete Iomega UltraMax desktop hard drive must be replaced. All stored data are lost. To install a new (replacement) unit, continue with Section 2-5 "Install a replacement Iomega UltraMax desktop hard drive" on page 2-3. If you believe that HDD1 and/or HDD2 are OK, you may try to install them in the new Iomega UltraMax desktop hard drive to check if they are OK. How to replace the HDDs are described in: Chapter 3 - "Damaged Disk Replacement Procedure" on page 3-1.

NOTICE When disconnecting the Iomega UltraMax desktop hard drive from the Vivid system, PRESS ALT + E and select the device in the dialog box that opens on the screen. PRESS SET.


Chapter 2 - Disk Drive Complete Replacement Procedure 2 - 3

Section 2-5Install a replacement Iomega UltraMax desktop hard drive

1.) Connect the USB 2.0 cable to the USB 2.0 socket at the rear of the disk unit.2.) Connect the cable from the power supply to the power connector at the rear of the disk unit.3.) Verify that the volume configuration is set to RAID 1 as described in 1-4-2 "Volume Configuration"

on page 1-6.4.) Connect the power cord from the power supply to the mains AC outlet.5.) Switch ON the power. 6.) Study the lights and verify that they function as described in 1-4-4 "Status lights on front of unit" on

page 1-7.

NOTE: It is important that the Iomega UltraMax desktop hard drive has a unique volume name.

7.) Change the volume name as described in 1-4-6 "Change volume name" on page 1-8.8.) When the Volume Name has been set, connect the USB cable to the Vivid i/q or Vivid S5/S6 system.9.) Verify that the drive appears for selection as described in

Section 4-1 "Disk Management" on page 4-1.


2 - 4 Section 2-5 - Install a replacement Iomega UltraMax desktop hard drive

This page was intentionally left blank.


Chapter 3 - Damaged Disk Replacement Procedure 3 - 1

Chapter 3Damaged Disk Replacement Procedure

Section 3-1Contents

3-1 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-13-2 Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-13-3 Replacement Part . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-13-4 Switch off power on the Iomega UltraMax desktop hard drive . . . . . . . . . . . . . . . . . . . . 3-13-5 Disconnect the Iomega UltraMax Desktop Hard Drive . . . . . . . . . . . . . . . . . . . . . . . . . . 3-23-6 Outer Casing Removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-33-7 Defect disk removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-43-8 New hard disk drive (HDD) installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5

Section 3-2Tools

PH1 Phillips screwdriver (PH #1)

Section 3-3Replacement Part

Section 3-4Switch off power on the Iomega UltraMax desktop hard drive

1.) Switch off the power on the unit.2.) Disconnect the power cable from the mains power outlet.For more information, see: Figure 1-5 "HDD disk unit, front view" on page 1-7.

Table 3-1 Replacement part

ITEMPART

NUMBER DESCRIPTION QTY FRU

1 066E0662 Hard Drive 3,5 inch 1TB SATA for Iomega Norsk Datalagring: NDUR-1T-HD 1 Y

NOTICE Ensure that there is no activity on the drive before you turn it off. If power is turned off when files are written to the drive, the files will be corrupted.Do not remove the Iomega UltraMax desktop hard drive or other peripherals from the Vivid systems while these are in Standby mode. Systems should be shut down prior to unplugging peripherals.


3 - 2 Section 3-5 - Disconnect the Iomega UltraMax Desktop Hard Drive

Section 3-5Disconnect the Iomega UltraMax Desktop Hard Drive

1.) Shut down the system.2.) Disconnect the USB cable at the rear of the unit.3.) Disconnect the power cable at rear of the unit.For more information, see: Figure 1-2 "HDD disk unit, rear view" on page 1-5.

NOTICE When disconnecting the Iomega UltraMax desktop hard drive from the Vivid system, PRESS ALT + E and in the dialog box that opens, select the device and click SET.



Section 3-6Outer Casing Removal

1.) Unscrew the four Phillips screws identified in Figure 3-1 "Bottom side of drive housing" on page 3-3.

2.) Slide the cover away from the rest of the unit, see: Figure 3-2 on page 3-3.

Figure 3-1 Bottom side of drive housing

Figure 3-2 Slide cover away

Figure 3-3 Cover removed


3 - 4 Section 3-7 - Defect disk removal

Section 3-7Defect disk removal

3-7-1 Preparations1.) Ensure that no data is transferred to or from the disk.2.) Turn off the power on the unit.3.) Remove the cover as described in Section 3-6 "Outer Casing Removal" on page 3-3.

3-7-2 Remove the upper hard disk drive (HDD)1.) Remove the signal and power plugs at the rear of the upper HDD, see: Figure 3-4 "HDD

disconnection" on page 3-4.

2.) Remove the four screws, two on each side, used to fix the upper HDD see: Figure 3-5 on page 3-43.) Remove the upper HDD.

3-7-3 Remove the lower hard disk drive (HDD)1.) Remove the signal and power plugs.2.) Remove the four screws, two on each side.3.) Remove the lower HDD.

Figure 3-4 HDD disconnection

Figure 3-5 Side view showing disk fixing screws

POWER PLUG SIGNAL PLUG



Section 3-8New hard disk drive (HDD) installation

1.) Install the new HDD in the cabinet.2.) Fasten the HDD at both sides using the removed screws.3.) Connect the power and signal plugs at rear of the HDD.4.) If both HDDs were removed earlier: Install the upper HDD (repeat step 1 to 3 for the upper HDD).5.) Install the cover and fasten with the four screws you removed earlier.6.) Connect the power cables to the drive.7.) Plug in the AC cable in the wall outlet.8.) Switch the power ON.

NOTE: When a defect hard disk drive has been replaced, the drive need to be rebuilt.

9.) The rebuild will start as soon the power is ON. Depending on the amount of data on the drive, this rebuild may take several hours. For info on the status indicators, see: 1-4-4 "Status lights on front of unit" on page 1-7.

10.)When the rebuild is complete, connect the drive to the Vivid i/q via the SafeLock cart or to the Vivid S5/S6 system with the USB cable.

11.)Next, continue with Section 4-1 "Disk Management" on page 4-1.


3 - 6 Section 3-8 - New hard disk drive (HDD) installation

This page was intentionally left blank.


Chapter 4 - Disk Management 4 - 1

Chapter 4Disk Management

Section 4-1Disk Management

1.) Press Config.2.) Select Admin > Disk Management.

3.) Select USB HardDisk, as illustrated in Figure 4-1 "Destination device selection after connection" on page 4-1.

Figure 4-1 Destination device selection after connection


4 - 2 -

Section 4-1 Disk Management (contd)

4.) Ensure that the disk is selected.5.) Perform Disk Management as described in the User Manual.

NOTE: When Disk Management has been performed, back-up the Patient Archive to a medical grade DVD recordable disc. Store the DVD in a safe place in case you need it in the future.

Figure 4-2 Destination device after selection

2010, General Electric Company.GE Medical Systems, Israel Ltd.4 Etgar Street39120 Tirat CarmelIsraelwww.gehealthcare.com

Important PrecautionsLEGAL NOTESRevision HistoryList of Page ChangesChapter 1InstallationSection 1-1 ContentsSection 1-2 Introduction1-2-1 Overview1-2-2 Contents in kit1-2-3 Prerequisite1-2-4 Warranty

Section 1-3 Environmental Dangers1-3-1 Patient Vicinity UL60601-11-3-2 Patient Environment IEC60601-1-1

Section 1-4 Installation and Setup1-4-1 Connecting the Cables1-4-2 Volume Configuration1-4-3 Switch ON the Disk Unit1-4-4 Status lights on front of unit1-4-5 Security cable1-4-6 Change volume name

Chapter 2Disk Drive Complete Replacement ProcedureSection 2-1 ContentsSection 2-2 OverviewSection 2-3 Switch off power on the Iomega UltraMax desktop hard driveSection 2-4 Disconnect the Iomega UltraMax desktop hard driveSection 2-5 Install a replacement Iomega UltraMax desktop hard drive

Chapter 3Damaged Disk Replacement ProcedureSection 3-1 ContentsSection 3-2 ToolsSection 3-3 Replacement PartSection 3-4 Switch off power on the Iomega UltraMax desktop hard driveSection 3-5 Disconnect the Iomega UltraMax Desktop Hard DriveSection 3-6 Outer Casing RemovalSection 3-7 Defect disk removal3-7-1 Preparations3-7-2 Remove the upper hard disk drive (HDD)3-7-3 Remove the lower hard disk drive (HDD)

Section 3-8 New hard disk drive (HDD) installation

Chapter 4Disk ManagementSection 4-1 Disk Management

Documents

IOMEGA_0_00