I/O Expansion Board CUBASE 40M - COMFILE Techcomfiletech.com/content/cubloc/cubase40m.pdf · Comfile Technology CUBASE 64M User’s Manual 3 of 10 Introduction and Specifications

Comfile Technology CUBASE 64M User’s Manual 1 of 10 www.ComfileTech.com

I/O Expansion Board

CUBASETM

40M

User's Manual

MANUAL VERSION: 2011-11-24

CUBLOC module not included

“Everything for Embedded Control”

Comfile Technology Inc. www.ComfileTech.com

Copyright 1996,2011 Comfile Technology


Table of Contents Introduction and Specifications....................................................................... 3 I/O Map ...................................................................................................... 4 Programming the CUBLOC Core Module ........................................................... 5 Display Devices............................................................................................ 6 Keypad Devices............................................................................................ 7 DIN Rail Mounting ........................................................................................ 8 Dimensions ............................................................................................... 10


Introduction and Specifications The CUBASE boards are the CUBLOC’s I/O expansion boards for industrial field applications requiring 12 or 24V DC inputs and outputs. The CUBLOC core modules use 5V (TTL) level signals.

Model CUBASE-40M

Processor zCB405/TPC93

Program Memory (Flash) 200KB

Data Memory (RAM) 51KB(BASIC)+4KB(Ladder Logic)+55KB(Heap)

EEPROM 4KB

Serial Ports for Communication

2 High-speed hardware independent serial ports (Ch. 0 & 1: RS232C 12V)

(Ch. 2: RS232 TTL) (Ch. 3: RS485)

Configurable Baud rates: 2400 to 230,400 bps

Digital Inputs 24 Opto-Isolated 7.5 to 24V

Digital Outputs 16 Opto-Isolated RELAY

Analog Inputs 4 Channel 10-bit ADCs

Configurable Input Voltage: 0 to 5V

Analog Outputs 3 Channels 16-bit PWMs

Configurable Modes: PWM only

Counters 2 Channel 16-bit High Speed Counters for 5V Pulse Input (100khz)

Timer 1 User Configurable Timer, Configurable Interval Units =

10msRequired Power: DC 12 to 28V

Power - Current Consumption w/ ports unloaded: @ 24VDC: 30mA

- Isolated External 5 VDC Output: 5V/600mA

Insulation-Resistance Input & Output & Input FG: DC500V, 100MΩ, Cut-off current:

10mA, 1Min

Withstanding-Voltage

-Input & Output: AC500V 1Min * Cut Off Current: 10mA, DC500V 100MΩ

- Input FG: AC500V 1Min * Cut Off Current: 10mA, DC500V 100MΩ

Vibration 10~50Hz at 2G for 3 min. period, 30 min. along X,Y and Z axis

Impact 10G for 20mS, Once on each X,Y and Z axis

Keypad Plug-N-Play Keypad Controller Support

CuNET, I2C Support Yes

Din-Rail Mount Yes

Relay Support Included

LCD Plug-N-Play LCD Support

Operating Temp. -10˚C to 50˚C (10% to 95% RH Non-Condensing)

Storage Temp. -10˚C to +70˚C (10% to 95% RH Non-Condensing)

Size 7.07" x 5.11" x 0.78" (179.8 x 129.8 x 20mm)


I/O Map


Programming the CUBLOC Core Module To program the CUBLOC core module, you will need to use CUBLOC Studio. CUBLOC Studio is free and can be downloaded from our website at www.ComfileTech.com. With CUBLOC Studio installed on your PC, you can then write programs using BASIC or Ladder Logic. To download programs to the CUBLOC module, connect your PC to the CUBASE’s download port with an RS-232 cable. If your PC does not have an RS-232 port (COM port), you can use a USB to RS-232 converter. USB to RS-232 converters are available on our website.

For more detailed information about programming the CUBLOC, please refer to the CUBLOC User’s Manual. It too can be downloaded from our website. Please refer to the I/O map section of this manual or the CUBASE’s PCB for CUBLOC I/O mappings.

USB to RS-232 Converter


Display Devices The CUBASE’s CSG and CUNET ports are I2C ports that can be used to interface to Comfile Technology’s various display devices. The CSG port is for interfacing to Comfile Technology's 7-segment display devices (CSG-4M, CSG-4S). However, using the Set I2C command, CSG output can also be sent to the CUNET ports. The CUNET port is for interfacing to Comfile Technology's character LCD (CLCD) devices (CLCD420-B, CLSD420-G, CLCD216-G) or any other CUNET/I2C device, all of which are available at www.ComfileTech.com.

CLCD and CSG devices interface cable can be up to 3 meters in length. A 1-meter cable is available on our website.


Keypad Devices The keypad port can be used to interface to Comfile Technology’s keypad input devices. Keypads, the keypad controller, and any necessary cables are all available at www.ComfileTech.com.

5x4 Keypad 4x4 Keypad

4x4 Numeric Keypad

Keypad Controller


DIN Rail Mounting The CUBASE can be mounted to a DIN Rail using a Comfile Technology’s DIN Rail brackets. Simply attach the DIN Rail bracket to the back of the CUBASE and fasten with two screws.

CUBASE with DIN Rail Bracket

CUBASE with DIN Rail Bracket Mounted (Rear View)


Dimensions

Documents

I/O Expansion Board CUBASE 40M - COMFILE Techcomfiletech.com/content/cubloc/cubase40m.pdf · Comfile Technology CUBASE 64M User’s Manual 3 of 10 Introduction and Specifications