invisibleSHIELD™ InstallationinvisibleSHIELD™ Product Installation Training

• Carefully review product installation instructions

• Practice product installation

• Watch videos included (links)

• Congratulations! You are now proficient in installing the invisibleSHIELD™.

invisibleSHIELD™ InstallationBEFORE YOU BEGIN

• Turn your device off. Your device will need to be off for 12 to 24 hours following installation to allow the invisibleSHIELD™ to properly cure.

invisibleSHIELD™ Installation01. WASH YOUR HANDS

• Before beginning, wash your hands thoroughly and wipe down the device to remove smudges, particles and skin oils.

• Place the device on a clean, stable surface, free of lint and debris.

invisibleSHIELD™ Installation02. HANDLING OF invisibleSHIELD™

• In order to avoid getting fingerprints on your invisibleSHIELD™, wet your fingertips with Application Solution before handling the invisibleSHIELD™.

• Carefully peel the invisibleSHIELD™ from the backing, spraying solution on the sticky side of the invisibleSHIELD™ as you peel.

• If you need a second set of hands, ask a friend to help handle the invisibleSHIELD™.

invisibleSHIELD™ Installation03. APPLICATION SOLUTION

• Once removed from the paper backing, hold the invisibleSHIELD™ and lightly moisten the front and back of it with Application Solution.

• Be sure to dampen the invisibleSHIELD™, NOT your device.

invisibleSHIELD™ Installation04. invisibleSHIELD™ ALIGNMENT• Place the invisibleSHIELD™ onto your device, sticky side down. Use enough solutionto allow the invisibleSHIELD™ to slide on the surface of your device.

• Align the invisibleSHIELD™ using the top or bottom edge of your device asa reference point. For best results, apply sufficient solution to the film.

• If the alignment is not perfect, gently remove the invisibleSHIELD™ and tryagain. If the invisibleSHIELD™ appears stretched, set aside for 3 to 5 minutesto heal, then re-moisten and try again.

invisibleSHIELD™ Installation05a. invisibleSHIELD™ PLACEMENT• Moisten the Installation Squeegee with Application Solution to help it glide more easily over the surface of the film.

• Hold the invisibleSHIELD™ down on the device with one hand, while using your other hand to squeegee out the excess moisture. We recommend you begin at the center of the device, and work towards the edges, removing any bubbles as you go.

invisibleSHIELD™ Installation05b. invisibleSHIELD™ PLACEMENT• The pressure applied by the squeegee will adhere the invisibleSHIELD™firmly onto your device, thus preventing it from slipping out of alignment.

• Be sure to squeegee away from any open or uncovered ports.

invisibleSHIELD™ Installation06. EXCESS MOISTURE & CURING

• Soak up any excess moisture with a lint-free or microfiber cloth. Micro-bubbles and imperfections will work themselves out in 2 to 3 days.

• Remember to leave your device off for the next 12 to 24 hours to allow for proper curing.

invisibleSHIELD™ InstallationInstallation Summary

• Easy and straight forward process

• Can be completed in a small time frame

• Short learning curve

• Requires no additional tools not included in package