Upload
phamkhanh
View
230
Download
0
Embed Size (px)
Citation preview
Information and pictures to be considered “confidential” November 2014 (not to be disclosed to anyone without ALFA MECCANICA Page 1 written authorization)
INTRODUCTORY NOTE
GENERAL INFORMATION
ALFA MECCANICA is a privately owned Company located in Sommariva del Bosco
(20 miles South of Turin- Italy) that has been active in aerospace technical fields
since 1975 as Supplier of some of the most important aerospace Italian Companies.
ALFA MECCANICA has a workforce of 50 persons (including white and bleu collars).
The main Customers are:
AVIOAERO
ALENIA AERMACCHI
THALES ALENIA SPACE
SABCA
NEXEYA
SIEMENS TURBOCARE/ETHOSENERGY
.
Information and pictures to be considered “confidential” November 2014 (not to be disclosed to anyone without ALFA MECCANICA Page 2 written authorization)
TECHNICAL SKILLS (1)
ALFA MECCANICA activity is mainly focused on “high precision machining”.
The internally performed operations are:
3-4-5 axis NC milling, NC turning NC multi axis turning EDM operations (die sinking and wire cutting) trimming and drilling of honeycomb panels (both with aluminum
alloys skins or with carbon fibers skins) ND Controls (F.P. Inspections) manual GTA welding dynamic balancing operations, assembling operations (bushings, bearings, inserts, nuts) functional tests of manufactured components (pressure tests,
flow tests)
ALFA MECCANICA is used to work with all aerospace high technology materials as
Aluminum Alloys, Stainless Steels, Titanium Alloys, Nickel Alloys(Inconel, Hastelloy),
etc… and very often also to manage the raw material procurement process from
properly certified and controlled Suppliers
Information and pictures to be considered “confidential” November 2014 (not to be disclosed to anyone without ALFA MECCANICA Page 3 written authorization)
TECHNICAL SKILLS (2)
ALFA MECCANICA is supported by a network of properly selected and certified supplier Companies to perform several non destructive controls and special processes as, for instance:
NC grinding non destructive controls (FPI-RX-MPI) Laboratory controls (as metallurgic controls of raw materials) heat treatments forming of sheet metal parts normal and vacuum brazing operations welding operations surface treatments (painting, oxidations, plasma coatings
application, etc.) Shot peening operations Titanium cleaning
In case of external processes utilization ALFA MECCANICA normally carries the full
responsibility of the finished parts.
Information and pictures to be considered “confidential” November 2014 (not to be disclosed to anyone without ALFA MECCANICA Page 4 written authorization)
TECHNICAL SKILLS (3)
ALFA MECCANICA normally manufactures parts/assemblies following Customers
drawings and the associated technical/quality requirements. ALFA MECCANICA
“Production Engineering Department” is equipped with four CAD-CAM workstations
and the proper software to receive from Customers 2D-3D files (CATIA 5 and
ENOVIA VPLM software to manage CATIA files) and to generate internally all the NC
programs for the machining centers using CAD-CAM software (as MOLD PLUS,
WORK EXPLORER – MASTER CAM- WORK NC, etc..).
During the development phase of new products ALFA MECCANICA very often
supports Customers with “concurrent engineering” activity with the target of
obtaining the best compromise between the engineering requirements and the
associated manufacturing costs.
Information and pictures to be considered “confidential” November 2014 (not to be disclosed to anyone without ALFA MECCANICA Page 5 written authorization)
TECHNICAL SKILLS (4)
From the beginning of 2014 we have introduced a new F.P.I equipment with the
following characteristics:
Semiautomatic system with tanks capacity of 700 x 800 x 800 mm.
Methods of inspection IA3, ID2, ID3 according to ASTM 1417,
Personnel is already fully qualified according to NAS 410
The process will be operative within the end of 2014
NADCAP qualification in process.
Information and pictures to be considered “confidential” November 2014 (not to be disclosed to anyone without ALFA MECCANICA Page 6 written authorization)
ALFA MECCANICA QUALITY SYSTEM/CERTIFICATIONS
ALFA MECCANICA Quality System is certified ISO 2001:2008 (since June 2000)
and EN9100:2009 (since 2006).
ALFA MECCANICA has been certified by Customers to perform several
activities/processes as, for instance by AVIO AERO:
Wire and sinker EDM
TIG Welding
Bushings/Bearings Installation
ALFA MECCANICA Inspection Room, equipped with a temperature/humidity
control system, has the most advanced measuring gauges (optical gauges,
outside/inside depth micrometer gauges, calipers, etc.), and three C.M.M.
(two managed by NT SURFER and PCDMIS software with maximum capacity
of 4000 x 2000 x 1500 mm and the third one still manually controlled) .
Information and pictures to be considered “confidential” November 2014 (not to be disclosed to anyone without ALFA MECCANICA Page 7 written authorization)
MAIN CUSTOMERS / ENGINE-AIRCRAFT-SPACE PROGRAMS
ALFA MECCANICA is a “well established” Supplier of some of the main Italian
aerospace Companies as AVIO AERO, ALENIA AERMACCHI and THALES ALENIA
SPACE.
With reference to aircraft engine parts ALFA MECCANICA is currently
delivering parts to AVIO AERO parts for the following Programs: CF6-80C2/E1,
GE90, GEnx, T700, PW800, PW1100, PW1400, SAM146, V2500, TRENT900.
With reference to airplane parts ALFA MECCANICA is currently delivering
parts to ALENIA AERMACCHI, and recently also to SABCA, for the following
Programs: C27J, EUROFIGHTER TYPHOON, M346, F35, B767, A350, FALCON
5X
With reference to space applications ALFA MECCANICA is currently delivering
parts to THALES ALENIA SPACE for the following Programs: GALILEO, IRIDIUM,
CYGNUS. In the past ALFA MECCANICA has delivered parts for the following
Modules Programs: M.P.L.M., COLUMBUS, NODE 2 & 3, CUPOLA and ATV.
Information and pictures to be considered “confidential” November 2014 (not to be disclosed to anyone without ALFA MECCANICA Page 8 written authorization)
MAIN CUSTOMERS / SAMPLES OF RECENT ACHIEVEMENTS (1)
Samples of some recent achievements:
The development (design and manufacturing under AVIO AERO control), of a
new configuration of six AGB adapters manufactured starting from bars
instead of from castings with the target of improving the quality of the
finished parts and the reliability of the manufacturing process.
The production in very short time (three weeks from drawings availability)of
the first sets of parts for new Commercial Airplane Development Program
(two wing brackets in Aluminum Alloy and of a significant number of
components of the Airplane Flap Structure and Fairing in Titanium Alloy).
Information and pictures to be considered “confidential” November 2014 (not to be disclosed to anyone without ALFA MECCANICA Page 9 written authorization)
MAIN CUSTOMERS / SAMPLES OF RECENT ACHIEVEMENTS (2)
The production of the first set of parts of some critical components of a new
aircraft engine in the development phase.
Information and pictures to be considered “confidential” November 2014 (not to be disclosed to anyone without ALFA MECCANICA Page 10 written authorization)
SAMPLES OF AIRCRAFT ENGINE PARTS PRODUCED BY ALFA MECCANICA (1)
Information and pictures to be considered “confidential” November 2014 (not to be disclosed to anyone without ALFA MECCANICA Page 11 written authorization)
SAMPLES OF AIRCRAFT ENGINE PARTS PRODUCED BY ALFA MECCANICA (2)
Information and pictures to be considered “confidential” November 2014 (not to be disclosed to anyone without ALFA MECCANICA Page 12 written authorization)
SAMPLES OF AIRCRAFT ENGINE PARTS PRODUCED BY ALFA MECCANICA (3)
Information and pictures to be considered “confidential” November 2014 (not to be disclosed to anyone without ALFA MECCANICA Page 13 written authorization)
SAMPLES OF AIRCRAFT ENGINE PARTS PRODUCED BY ALFA MECCANICA (4)
Information and pictures to be considered “confidential” November 2014 (not to be disclosed to anyone without ALFA MECCANICA Page 14 written authorization)
SAMPLES OF AIRCRAFT ENGINE PARTS PRODUCED BY ALFA MECCANICA (5)
Information and pictures to be considered “confidential” November 2014 (not to be disclosed to anyone without ALFA MECCANICA Page 15 written authorization)
SAMPLES OF AEROPLANE STRUCTURAL PARTS PRODUCED BY ALFA MECCANICA (1)
Information and pictures to be considered “confidential” November 2014 (not to be disclosed to anyone without ALFA MECCANICA Page 16 written authorization)
SAMPLES OF AEROPLANE STRUCTURAL PARTS PRODUCED BY ALFA MECCANICA (2)
Information and pictures to be considered “confidential” November 2014 (not to be disclosed to anyone without ALFA MECCANICA Page 17 written authorization)
SAMPLES OF AEROPLANE STRUCTURAL PARTS PRODUCED BY ALFA MECCANICA (3)
Information and pictures to be considered “confidential” November 2014 (not to be disclosed to anyone without ALFA MECCANICA Page 18 written authorization)
SAMPLES OF PARTS FOR SPACE APPLICATIONS PRODUCED BY ALFA MECCANICA (1)
Information and pictures to be considered “confidential” November 2014 (not to be disclosed to anyone without ALFA MECCANICA Page 19 written authorization)
SAMPLES OF PARTS FOR SPACE APPLICATIONS PRODUCED BY ALFA MECCANICA (2)
WAVE GUIDES FOR SATELLITES
Information and pictures to be considered “confidential” November 2014 (not to be disclosed to anyone without ALFA MECCANICA Page 20 written authorization)
SAMPLES OF PARTS FOR SPACE APPLICATIONS PRODUCED BY ALFA MECCANICA (3)
HONEYCOMB PANELS FOR SATELLITES
Information and pictures to be considered “confidential” November 2014 (not to be disclosed to anyone without ALFA MECCANICA Page 21 written authorization)
SAMPLES OF PARTS FOR SPACE APPLICATIONS PRODUCED BY ALFA MECCANICA (4)
STRUCTURAL PARTS FOR MODULES
Information and pictures to be considered “confidential” November 2014 (not to be disclosed to anyone without ALFA MECCANICA Page 22 written authorization)
ALFA MECCANICA MAIN PECULIARITIES
ALFA MECCANICA is very appreciated by current Customers for the following main
characteristics:
Very flexible Customer oriented production organization
Prototypes manufacturing capability, built up mainly in Space Business,
that means the habit of working following Engineering instructions (as
generated during development Programs) and the attitude of obtaining
good parts at the first shot.
Excellent performances (both for quality of parts and consistent on time deliveries ) in production programs.
ALFA MECCANICA could be considered a “potential Supplier” by new Customers because of the following characteristics:
Financially sound Company (demonstrated by the significant investments
made during the still in place world wide crisis period). As a matter of fact
in 2008 ALFA MECCANICA moved from the previous plant of 1500 square
meters to a new plant of about 10.000 square meters, of which 5700 are
now covered, ready for several new machining centers installation.
Since 2008 five new machining centers, 2 EDM new machines and a ND
testing facility have been installed. As a consequence the staff has grown
from 30 persons in 2008 to the actual 50 persons.
Significant expansion capability of Production Activity (available in a short time) due to:
o the brand new machining centers/tools installed o the covered area still available for new machine tools installation o the present level of activity (one shift + two shifts for 3 lathes and 3
machining centers )
Information and pictures to be considered “confidential” November 2014 (not to be disclosed to anyone without ALFA MECCANICA Page 23 written authorization)
CONTACT INFORMATION
For further general information please visit ALFA MECCANICA web site: www.alfameccanicasrl.it
For any customized information need or to organize a visit of our plant, please get in touch with the below listed persons of ALFA MECCANICA Commercial Department:
Maurizio Burdese Commercial Manager E-mail: [email protected] Mobile: +39-335 8320040
Giacomo Marcocchia Business Development E-mail: [email protected] Mobile: +39-331 1748686