Introduction to the REPLICATE™ System...Superior aesthetics make it an excellent choice for anterior teeth. ... UL First Molar Clinical photos and x-rays provided by courtesy of

© 2015 Natural Dental Implants AG

Introduction to the REPLICATE™

System This introductory course was designed for anyone interested in

learning about the REPLICATE Immediate Tooth Replacement System.

Dentists who wish to take the REPLICATE System Clinical Training please send an email request to [email protected]

© 2015 Natural Dental Implants AG < >

The REPLICATE™ System is a new approach to single tooth replacement. It is comprised of three components

The REPLICATE™ Tooth The REPLICATE™ Try-In The REPLICATE™ Temporary Protective Crown

The REPLICATE Tooth is 100% customized, featuring a state of the art-surface and a unique titanium/zirconia hybrid design. The REPLICATE Try-In is used to check the socket before the REPLICATE Tooth is placed. The REPLICATE Temporary Protective Crown is bonded to the adjacent tooth or teeth and provides protection from occlusal forces while the REPLICATE Tooth osseointegrates.

INTRODUCTION th

ated

the

o the

es

REPLICATE Tooth

REPLICATE Temporary Protective Crown

2


The REPLICATE™ System is patient specific. Each component is fabricated for each individual patient, according to the doctor’s specification. The REPLICATE™ Tooth is designed to fit into the extraction socket and to be placed at the extraction appointment without drilling. A tight fit in the lower portion of the socket provides primary stability.

100% CUSTOMIZED

3


Introduction -The REPLICATE™ Tooth

Preparation, Temporary Protective Crown

Abutment and tight-fit endosseous implant portion

Gap between preparation and Temporary Protective Crown, no cementation

Iso- or sub-crestal glass fused joint

High-translucent Y-TZP zirconia

Y-TZP zirconia

Commercially pure titanium,

sandblasted, acid-etched,

super-hydrophilic

4


Introduction - Surface

5

State-of-the-art osseoconductive titanium surface for optimal hydrophilicity. REPLICATE System is designed to support osseointegration.

1 µm

10 µm

100 µm


Introduction – Hybrid Design

6

Seamless trans gingival joint is tightly sealed against bacteria colonization. Validated for lower incisor sample design to withstand 5 million cycles at 450N dynamic load.

Traditional dental implant/abutment interface risks bacteria colonization.

1 mm

200 µm


Introduction – Single and Multi-rooted Teeth

7

The REPLICATE System can be used to replace both single and multi-rooted teeth. Each tooth is designed individually and can be completely customized to specific clinical situations.

Examples of this include customizing the depth of the zirconia portion, reducing the height of the furcation point, combining the roots of multi-rooted teeth, eliminating root divergence

and digitally repairing crowns.


Introduction – All Ceramic Version

8

The new all-ceramic REPLICATE Tooth features a macro and micro-rough surface for osseointegration. Superior aesthetics make it an excellent choice for anterior teeth.


Introduction - Indication

9

Use for single tooth replacement, when immediate implantation with a non-submerged, delayed loading protocol is indicated

Primary stability need to be established at insertion, minimum bone height 7 mm

Not for multiple, adjacent teeth


Introduction - Clinical Process

10

2 weeks 24 weeks 10 day lab cycle

First Visit

Take 3D X-ray CBCT/DVT image

Take silicone

impression or intra-oral scan

Second Visit

Extract non-functional tooth

Insert REPLICATE

Tooth™ affix Temporary

Protective Crown

Third Visit

Control visit (optional)

Fourth Visit

Remove Temporary Protective Crown

Place definitive crown

CLINICAL CASE EXAMPLES The REPLICATE System is appropriate for a wide variety of clinical situations.


Clinical Case

Clockwise: palatal and vestibular view and x-ray direct after placement of

definitive crown, x-ray at the end of the 6 month healing phase, socket

after extraction, implant insertion and final position of REPLICATE Tooth with

cover shield.

UL First Molar

Clinical photos and x-rays provided by courtesy of Dr. Eike Peters, Wittlich and Dr. M Hopp, Berlin

12


X-rays and clinical photos provided by courtesy of Dipl. med. dent. Urs Brodbeck, Zurich

Clinical Case

Clockwise: lingual view after placement of definitive crown 6

months after insertion, x-ray immediate after extraction, x-ray 12

month post insertion, REPLICATE Tooth with temporary crown/splint,

implant preparation post

LL First Molar

13


Clinical Case

Clockwise: labial and lingual views

of REPLICATE Tooth prior and

after placement of the final crown, CAD

design, x-rays immediately

after placement and four months post placement

UL Lateral Incisor

14

Clinical photos provided by courtesy of Dr. Anna Jacobi, Munich


Clinical Case

Clockwise: occlusal and vestibular view 3 months after placement of definitive crown, x-ray at the end

of the 6 month healing phase, implant insertion of REPLICATE

Tooth, bone augmentation, membrane, and gingiva at

insertion

LR Second Premolar

15

Clinical photos and x-rays provided by courtesy of Dr. Eike Peters, Wittlich and Dr. M. Hopp, Berlin


Clinical Case

Clockwise: labial and lingual views directly after placement,

CAD design of REPLICATE Tooth, final crown, lingual and labial

views after four months of healing

LL Central Incisor

16

Clinical photos provided by courtesy of Dr. Eike Peters, Wittlich


•  Minimally invasive •  Excellent immediate aesthetics •  Less time, fewer appointments •  Fewer surgical interventions

Patient 1

•  Less time •  May lower risk of surgical error •  Moderate learning curve •  Low cost of entry, no drilling kit

to purchase

Doctor 2

Benefits of the REPLICATE System

17 © 2015 Natural Dental Implants AG >

SUMMARY •  The REPLICATE System is a unique approach to single tooth replacement. •  Each component of the REPLICATE System is100% customized to meet the

needs of the individual patient. •  The REPLICATE System can be used to treat a wide variety of patients and

clinical situations.

© 2015 Natural Dental Implants AG

Thank You

This introductory course was designed for anyone interested in learning about the REPLICATE Immediate Tooth Replacement System.

Dentists who wish to take the REPLICATE System Clinical Training

please send an email request to [email protected]

Documents

Introduction to the REPLICATE™ System...Superior aesthetics make it an excellent choice for anterior teeth. ... UL First Molar Clinical photos and x-rays provided by courtesy of